Suunto X10 manual

EN SUUNTO X10[...]

ALARM TIME/DATE UNITS GENERAL REFERENCE USE BARO MEM ALARM DECLINATION CALIBRATE NAVIGA TE ROUTE NAVIDA TA TRACK BACK ACTIVITY GPS fix MEMORY TIME/DATE DUAL TIME SYNC UTC LIGHT BRIGHT CONTRAST TONES TIME DATE TEMP PRESS ALTITUDE VERT DISTANCE SPEED POSITION DATUM GRID ALARM LIST PRESSURE GRAPH ALTITUDE BARO AL CREATE My Points ROUTE LIST NAVIDA TA [...]

2 T ABLE OF CONTENTS 1. GENERAL INFOR M AT ION .. ............. .. ............. ... ... ............. .. ... ............. ... .. .. 6 1.1 CHECKLIST ................................................................................................. 6 1.2 CARE AND MAINTENANCE ....................................................................... 6 1[...]

3 3.3.4 Alti/Baro data display .......................... ............................................. 27 3.3.5 Reference altitude ............................................................................ 28 3.3.6 Barometric Memory ....... .................................................................. 29 3.3.7 Alarm ........................[...]

4 4. SUUNTO X10 IN ACT ION ........ .. ... ... .. ... ............. ... ............. .. ... ............. ... .. 60 4.1 MONT BLANC CLIMBING .......................................................... ............... 60 4.1.1 Arrival and initial preparations ......................................................... 60 4.1.2 First hiking day ........[...]

5 10. TECH NICAL SPECIF ICATIONS ............. ................ ............. ................ .. 81 11. GPS D ATUM LIST ......... ................ ............. ............. ............. ............. ..... 82 12. LOCA L GRID LIST .......... .............. ............. ............. ............. ................ .. 90 13. GLOS SARY ........ ..[...]

6 1. GENERAL INFORMATION The Suunto X10 wristop computer is a reli able high-precision el ectronic instrument intended for recreational use. Suunto X10 should not be substituted for obtaining measurements that require profes sional or industr ial precision. NOTE: Do not use Suunto X10 as the only navi gation aid. Use all available navigation aids s[...]

7 1.3. W ATER RESISTANCE Suunto X10 is water resistant. Its water resi stance is tested to 100m/330ft according to ISO 2281 standard (www .iso.ch). This means that you can use the Suunto X10 for swimming or other water sports activities but it should no t be used for scuba diving or freediving. NOTE: Do not push the buttons under any circumstances [...]

8 Charging the battery with a mains charger T o charge the battery with a mains charger: 1. Plug the charger into the mains outlet and attach its data clip firmly to your Suunto X10. 2. When the battery level indicator is full, di sconnect the ch arger from the mains outlet. Y our Suunto X10 is now ready for use. Charging the battery thro ugh your [...]

9 The battery level indicator displays an estimate of the remaining battery level. The indicator value is obtained by referencing the current power consumption against the measured discharge state of the battery . The current pow er consumption varies depending on the function used. Therefore the i ndicator may show a lower value e.g. when using GP[...]

10[...]

11 2.2. MENUS 2.2.1. Basic menu structure ALARM TIME/DATE UNITS GENERAL REFERENCE USE BARO MEM ALARM DECLINATION CALIBRATE NAVIGA TE ROUTE NAVIDA TA TRACK BACK ACTIVITY GPS fix MEMORY TIME/DATE DUAL TIME SYNC UTC LIGHT BRIGHT CONTRAST TONES TIME DATE TEMP PRESS ALTITUDE VERT DISTANCE SPEED POSITION DATUM GRID ALARM LIST PRESSURE GRAPH ALTITUDE BARO[...]

12 The menus are organized hierarchically under the modes. When you select a mode with UP/DOWN, first the name of the mode is displayed, then its main display opens. When you scroll from one mode to another quickly , only the names of the modes are displayed. When you press ENTER in the mode's main display , the mode's Set menu opens. The[...]

13 3. MODES 3.1. GENERAL INFORMATION Suunto X10 has five different modes: T ime , Alti/Baro, Compass, Navigation and Activity . Y ou can switch between the modes wit h UP/DOWN. Each mode has several sub-modes. The mode indicator on the left side of the display indicates the active mode. 3.2. TIME MODE The T ime mode includes normal watch functions [...]

14 3.2.2. Stopwatch T o use the st opwatch: 1.Select the stopwatch shortcut with STOP/BACK. 2.Press ST ART/DA T A to start the stopwatch. If you want to record a split time, press ST ART/DA T A again. The split time stays on the display for three (3) seconds. Then Suun to X10 returns to showing the running time. 3.Press STOP/BACK to stop the stopwa[...]

15 The current time is displayed on the bottom row for r eference. 4. Set the correct hour with UP/DOWN and pr ess ENTER. The minute selection is activated. 5. Set the correct minutes with UP/DOWN and press ENT ER. The alarm is now set and you return to the Alarm menu . Deactivating alarms T o deactivate the alarm: 1. In the Set menu , Alarm is the[...]

16 3.2.4. Time/Date The current time is visible on the second row of the Time mode's main display . The dual time enables you to keep track of another time, for example, another time zone while traveling. The dual time can be di splayed as a shortcut on the third row of the T ime mode's main display . Scroll to the dual time shortcut with[...]

17 Sync When the Sync setting is on, Suunto X10 sychronizes the current time from the satellite signal every time t he GPS is activated. Y ou will also have to set the correct UTC Offset for your time zone. If Sync is off, the manually set time is not automatically updated. T o set the time synchronization: 1. In the Set menu, scroll to Time /Dat e[...]

18 3.2.5. Units The Units menu includes the unit and format settings used with all the Suunto X10 functions. They have an effect on how the information is displayed in all the modes. Setting the time format The time format setting defines whet her the 12h or 24h format is used. T o change the time format: 1. In the Set menu, scroll to Units and pre[...]

19 Setting the temperatu re unit The T emp setting defines the unit in which the temper ature is displayed. The options are Celsius (°C) and Fahre nheit (°F). T o change the temper ature unit: 1. In the Set menu, scroll to Units and press ENTER. T he Units menu is displayed. 2. Scroll to Te m p and p ress ENTER. The temperature unit field is acti[...]

20 Setting the vertical speed u nit The V ert setting defines the unit that the altimeter uses. The options are meters per minute (m/min), meters per hour (m/h), feet per minute (ft/min) and feet per hour (ft/h). T o change the ver t ical sp eed unit: 1.In the Set menu, scroll to Unit s and press ENTER. The Units menu is displayed. 2.Scro ll to Ver[...]

21 Setting the datum The Datum setting defines the map datum you use. (For more information on different datums and their corresponding numbers, see the GPS Datum List appendix.) T o set the datum: 1. In the Set menu, scroll to Units and press ENTER. T he Units menu is displayed. 2. Scroll to Datum and press ENTER. 3. Select the desired datum numbe[...]

22 T o set the position format: 1. In the Set menu, scroll to Unit s and press ENTER. The Units menu is displayed. 2. Scroll to Position and press ENTER. 3. Select the desired forma t with UP/DOWN and press EN TER. The position format is now set. The following table shows you the possible position formats and whether they u se a datum or a grid. Se[...]

23 3.2.7. General The General menu contains several general settings for your Suunto X10. Setting the light With the Light setting you can adjust the backlight of the Suunto X10 display . It has three possible settings: • Normal: The light switches on when you press ST ART/DA T A for mor e than 2 seconds, when an alarm is activated or w hen you r[...]

24 Setting the contrast This setting adjusts the contrast of the Suun to X10 display . The contrast is measured on a scale of 1 (minimum) to 9 (maximum). The maximum contrast setting consumes more power than the minimum setting. T o change the con trast: 1.In the Set menu, scroll to General and pre ss ENTER. The General menu is displayed. 2.Scro ll[...]

25 3.3. ALTI/BARO MODE The Alti/Baro mode is used for measuring altitude, ba rometric pressure and temperature. Suunto X10 calculates the altitude from the current barometric pres sure, which is more sensitive and accurate than the altitude measurement with the GPS, and is also available when the GPS is off. Because both altitude and weather data a[...]

26 T o change the Use sett ing: 1.In the Set menu, scroll to Use and press ENTER. The Alti/ Baro field is activated. 2.Sel ect alti or baro with UP/DOWN and press ENTER . 3.Press STOP/BACK to return to the main display . 3.3.2.Alti use When you select Alti, the following main display opens. It has three rows: V ertical speed: The first row displays[...]

27 3.3.3. Baro use When you select Baro, the following main display opens. It has three rows: Sea level barometric pressure: The first row displays the barometric pressure at sea level in the unit of your choice. Barometric pressure graph: The second row shows a grap hical presentation of the barometric pressure development dur ing the last 6 hours[...]

28 3.3.5. Reference altitude T o ensure that the altimeter shows correct readings, you fir st need to set an accurate reference altitude. T o do this, go to a location whose altitude you have checked, for example, with the help of a topographical map, and set the reference altitude to match the map reading . NOTE: If you do not know the current alt[...]

29 3.3.6. Barometric Memory The Baro mem function stores weather-related infor mation (sea level barometric pressure) f rom the last 7 days/168 hours. T o view the weather information: 1. In the Set menu, scroll to Baro mem with UP/ DOWN and press ENTER. The first inform ation page is displayed, and you can view the following information: •D a y [...]

30 T o activate or deactivate the weather alarm: 1.In the Set menu, scroll to Alarm with UP/DOWN and press ENTER. The Alarm menu opens. 2. Sc roll to Baro Al with UP/DOWN and press ENTER. The On/Off field is activated. 3.Change the field to either On or Off with UP/DOWN and press ENTER. The weather alarm is now set and you return to the alarm menu.[...]

31 3.4. COMPASS MODE The compass mode aids the G PS functions and of fers you navigational support even when the GPS is off. In the Compass menu you can set the declination and calibrate the compass to ensure accurate readings in any location. 3.4.1. Main display When you select the Compass mode, the main display opens. The main display has three r[...]

32 Bearing (bea): I f you are navigating a route from the Navigation menu, the third shortcut displays the bea ring to the next waypoint. If you have not activat ed a route and the GPS is on, the shortcut displays the bearing to the start position (where the GPS or an activity w as sw itched on). If the GPS is not on, the shortcut displays the late[...]

33 2. Hold yo ur Suunto X10 horizontally level and rotate it 360 degrees in the direction of the arrows for 30 seconds. If the calibrat ion succeeds, the message ‘COMPLETE’ is displayed. If it does not succeed, the me ssage ‘F AILED’ is displayed. If this happens, you have to calibrate it again. 3. Wh en the calibration is finished, press E[...]

34 Setting the compass declination manually T o set the compass declination manually: 1.In the Set menu, Declination is the first menu item. Press ENTER to select it. The On/Off/Auto field is activated. 2.Sel ect On with UP/DOWN and press ENTER. The direction field is activated. 3.Select the desired direction with UP/DOWN and press ENTER. The degre[...]

35 3.5.1. Using the Navigation mode This section contains a brief guide on how to use the Navigation mode. Y ou can find more detailed instructions in the sections below . T o use the Naviga tion mode: 1. Create a route either on Suunto X10 or using Suunto T rek Manager and transfer it to Suunto X10 (section 3.5.3. Creating a route). 2. Select a ro[...]

36 W aypoin t: When Navigate is on, the first row displays the name and number of the navigated waypoint. If Navigate is off, it displays the position where the GPS was first activate d (this point is named ST ART). Distance to waypoint: When the GPS is on, the second row displays the distance to the next waypoint. Shortcuts: The third row displays[...]

37 3.5.3. Creating a route Suunto X10 does not include any factory-set routes. So, to be able to use the route function, you first need to create a rou te. Y ou can store up to 50 routes in the memory . Each route can include 50 waypoints, ten of which can be alarm points. NOTE: It is easier to create routes on a PC with Suunto T rek Manager becaus[...]

38 Creating a new waypoint to a rou te by entering the coordinates With this function you can add new way points to previously created routes. T o create a new wa ypoint: 1.In the Set menu, scroll to Route and press ENTER. The route list is displayed. 2.Select a route with UP/DOWN and press ENTER. The waypoint list is displayed. 3.In the route menu[...]

39 5. Choose t he order number and the name of the new waypoint, and ad d the bearing and the distance from the previously selected way point. 6. Press STOP/BACK if you want to return to the waypoint list without accepting changes. 7. Long press ENTER to accept the changes and return to the ma in display . 3.5.4. Using a route After you have create[...]

40 The symbol options are: Y ou will navigate from the beginning or the active waypoint to the end of the route. When you arrive at the waypoint, Suunt o X10 will automatically activate the next waypoint. Y ou will naviga te in the reversed order , from the end or from the active waypoint to the beginning of the route. Y o u will navigate to a chos[...]

41 Viewing waypoints T o view waypoints: 1. In the Set menu, scroll to Route and press ENTER. The route list is displayed. 2. Select a route with UP/D OWN and press ENTER. A list of waypoints is displayed. 3. Select a waypoint with UP/DOWN and press ENTER. The waypoint menu is displayed. 4. Vie w is the first menu item. Press ENTER to select it. Th[...]

42 MyPoints The MyPoints function stores up to 50 indi vidual waypoints (10 of which can be alarm points) that are not affixed to a route in the Suunto X10 memory . T o navigate to a MyPoints wp: 1.In the Set menu, scroll to Route and press ENTER. The route list is displayed. 2.Select MyPoints route with UP/DOWN and press ENTER. The waypoint menu o[...]

43 3.5.5. Editing routes and waypoin t s Y ou can edit the routes and waypoints you have created and era se those that you no longer need. Editing waypoints T o edit a waypoint : 1. In the Set menu, scroll to Route and press ENTER. The route list is displayed. 2. Select a route with UP/DOWN and press ENTER. The way - point list is displayed. 3. Sel[...]

44 When the EPE = 1m and GPS signal strengt h indicator shows 5 bars, th e location is updated automatically . Y ou can also acce pt a lower accuracy by pressing ENTER. Erasing a rout e T o erase a route: 1.In the Set menu, scroll to Route and press ENTER. The route list is displayed. 2.Select the route you wish to erase with UP/DOWN and press E NT[...]

45 3.5.6. Navigation data displays All navigation data displays show you info rmation regarding the selected route and its waypoints. The amount of data you receive depends on your selections. Y ou cannot use this function before you have activated a r oute. If you try to use it be fore you have activated a route, Suunto X10 asks you to activate on[...]

46 Route summary The summary displays the name and total length of the route, the number of waypoints and the total ascent. W aypoint dat a page s These pages display the name of the waypoint, distance, bearing and altitude difference. The method how the information is displayed depends on the selected navigation method. • With these navigation m[...]

47 NOTE: If you are currently navi gating, and approach the next point, this waypoint data page displays the dist ance and time to that point. Navigat ion methods and the T rack back f unction After you have selected a route and pressed ST ART/DA T A, you can only see the summary page. It is similar to the one above. 3.5.7. Navidata With NaviData y[...]

48 Cross T rack Error (xte): T his is the shortest distance from your current location to the straight line connecting the waypoints of the route. Speed (sp d): Displays the speed in the u nit of your choice. Heading (hea): Displays the heading in degrees. 3.5.8. T rack Back (Active track) The T rack Back function starts the navigation along the cu[...]

49 3.6. ACTIVITY MODE While the Navigation mode shows you where to go, the Activity mode displays your current performance. It is the mode you need when you want to measure and record your activity , be it running in your neighbor hood or navigating in the wilderness. The Activity mode shows you the speed, trav eled distance, time from start and ot[...]

50 3.6.2.Activity The Activity function records data from a track. T o use the Activity function: 1.In the Set menu, Activity is the first menu item. Press ENTER to select it. The symbol field is activated. 2.Choose the desired activity symbol with UP/DOWN and press ENTER. The symbol options are: This turns on the GPS and the Navigate function acco[...]

51 3.6.3. GPS fix The selected GPS fix interval determines how often your Suunto X10 establishes a satellite connection and how often it stores data in the memory . This in turn affects the battery life. T o select a GPS fix: 1. In the Set me nu, select GPS fix with UP/DOWN and press ENTER. The fix interval field is activated. 2. Select a suitable [...]

52 power), it displays when the data from the last location was valid. It displays when the data was not sufficient. NOTE: If you want to only record the altitude profile of your activity without GPS positioning, set the GPS fix interval to Manual and start the activity . 3.6.4. Memory The Memory function displays the amount of free memory and the [...]

53 Viewing log files T o view a log file: 1. Vie w is displayed in reve rsed color. Press EN TER to select it. Y ou can scroll the log information pages with UP/DOWN. Suunto X10 displays the following information: • Name of the file (always visible on the top row) • Distance traveled (dfs) • T ime from start (tfs) • Maximum speed (max) • [...]

54 3.6.5. T r ack back (track log) Y ou can use the Activity mode’s T rack Back function to navigate along any t rack log file found in the memory . Suunto X10 will guide you to the nearest waypoint and from there to the starting location, or to the finish if you so choose. T o activate the Track Back function: 1. In the Set menu, select as the A[...]

55 3.6.6. Activity data display The Activity data display shows you the inform ation summary for the current activity or in case you do not have a current one, the latest activity . T o activate the display , press ST ART/DA T A in the Activity mode’s main disp lay . The in formation is displayed on four pages. The pages change automatically ever[...]

56 3.7. FUNCTION MENU T o enter the Function menu, long press EN TER in any of the main displays. The Function menu opens and the follow ing functions are available. 3.7.1. GPS The GPS function allows you to turn the GPS on or off. T o turn the GPS on or off: 1.In the Function menu, GPS is the first menu item. Press ENTER to select it. The On/Off f[...]

57 3.7.3. Mark Home With Mark Home function you can store a position where you wish to return. After storing the position, you can start search ing for it with the Find Home function. T o store a position: 1. In the Function menu, scro ll to Mark Home and press ENTER. The Mark Home display opens. 2. If the GPS is on, the device displays the EPE (Es[...]

58 The Find Home display shows the following information: Heading: The sighting marks appear on the u pper corner of the display and the circular bearing indicator app ears on the outer rim of the display . When the bearin g indicator is inside the sighting marks, you are moving in the direction of the set bearing. Home: The first row displays the [...]

59 T o view the Find Home data display: 1. In the Find Home display , press ST ART/DA T A to enter the Find Home Data display . There you can see the record ing time on the upper row and the coordinates and the bearing on the lower rows. 2. Press STOP/BACK to exit the Find Home Data display . 3.7.5. Position The Position function allows you to view[...]

60 4. SUUNTO X10 IN ACTION 4.1. MONT BLANC CLIMBING In this chapter you will follow an American mountaineer on his independent two-day trip to the summit of Mont Blanc along the G outer route. In the previous chapters you have acquired theoretical kn owledge on how to use all the Suunto X10 funct ions and in this chapter you will find out how to ap[...]

61 4.1.2. First hiking day While starting to hike, he sets the GPS fix to 1 sec in the Activity mode and select s as the Activity option. He chooses th e 1 sec option because he wants the GPS to update the information as often as possible. Although this option also consumes a lot of battery power , he knows that the battery will still last througho[...]

62 As he enjoys the beautiful scenery on his hike towards Glacier de T ete Rousse, he also notices that clouds ar e dispersing from the sky , which gives him a reason to suspect that the barometric pressure has changed. After arriving at Refuge l'Aig du Gouter , Mike sets the Baro mode on so that the barometric pressure changes do not af fect [...]

63 4.1.3. Second hiking day Right on time, Mike wakes up to a beeping sound, shuts down the alarm with a press of a button, and checks the Baro mode. He is happy to notice that the barometric pressure is on the rise, which augurs good weather . Before setting off, Mike switches his Suunto X10 to the Alti mode so that he can use the altimeter as a n[...]

64 Mike has planned the trip carefully , trai ned meticulously on easier cliffs, purchased proper equipment and learned how to use it. He is now ready for the ard uous journey that will take him to the top.[...]

65 4.2. CROSS COUNTRY RUNNING This section describes a typical way to use your Suunto X10 in such sports activities as running or cycling, where speed and di stance information is needed more often than navigation. Early Sunday morning, Roger Runner wakes up to the beep of his Suunto X10. It is time for his 30km run, one of the most important train[...]

66 5. GLOBAL POSITI ONING SYSTEM (GPS) Suunto X10 uses Global Positioning System (G PS) in determinin g the user's position. GPS incorporates a set of satellites that orbit t he Earth at the altitude of 20 000 km at the speed of 4 km/s. The satellites send rela tively weak radio si gnals at power levels comparable to normal household light bul[...]

67 If possible, stay clear from people, trees or other dense vegetation when activating the GPS. They can cause problems to the si gnal reception. If you are in a fore st, try to find an open or scarcely wooded area before activating the GPS. • Rocks, buildings or any m et allic materials The GPS signals will not penetrate any solid constructions[...]

68 activate the receiver more quickly , if y ou turned it off in between. Some downloaded data remains valid for several weeks, and s ubsequent GPS starts will take less time. STRIVE FOR IDEAL ACCURACY CONDITI ONS Under all-in-view satellite co n ditions a global average horizont al positioning error is 7.8 meters (95% confidence level). However, d[...]

69 6. SUUNTO TREK MANAGER Suunto T rek Manager (STM) is a software designed to enhance the functionality of your Suunto X10. Y o u can use it to perform various tasks such as transferring routes or waypoints stored in the Suunto X10 me mory . When you have transferr ed the data, you can easily organize, view and add related information in it. The S[...]

70 6.4. SUUNTO T REK MANAGER FEATURES The Suunto T rek Manager display is divi ded in to six separate windows. These windows are shown in the figure below and t heir functio ns are briefly introd uced in the following sections. (For more detailed in structions, see Suunto Trek Manager Help.)[...]

71 6.4.1. X10 window (1) The toolbar on the top of the X10 window contains four icons: • Connect to X10: With this icon you can create the connection between your Suunto X10 and STM. • Download selected item(s) to folder: With th is icon you can transfer data from Suunto X10 to STM. • Delete selected item : First select the items you want and[...]

72 6.4.2. Local Data window (2) The toolbar on the top of the Local Data window contains five normal icons and a menu icon: • Draw / Focus: With this icon you can draw routes on t he map. Whe n you hold your left mouse button you can also scroll the map with your mouse. • Create route with on e point: With this icon you can create a route that [...]

73 When you click the menu icon on the right side o f the toolbar , th e following menu opens. The availability of the menu functions depends on the selected file or folder . Draw: Explained along with the other icons of the Local Data window . •Add map: Add a map in the selected folder . •Add folder: Add a n ew sub-folder in the selected folde[...]

74 6.4.3. Map window (3) The toolbar on the top of the Map window a variable number of icons depending on your selections: • 2D / 3D view: With this icon you can display the routes either in 2D or 3D format • Create route and add points from map: Cli ck on this icon to create a new route. Then click on the Map window to add the waypoints or add[...]

75 6.4.4. Profiles window (4) In this window you can view your altitude pr ofiles and exact speed details as graphs. The toolbar on the top of the Profiles win dow contains three icons: Tim e: With this icon you can view t he information by time periods. Distance: With this icon you can view the information by distances. Zoom: With this icon you ca[...]

76 7. SUUNTO TRACK EXPORTER Suunto T rack Exporter is an application used for exporting track logs from yo ur Suunto X10 to the Google Earth ma pping service. Y ou can then view your tracks on the Google Earth satellite imagery and maps. For exporting logs to Google Earth you must have the Google Earth application installed on your PC. NOTE: Y ou c[...]

77 window . Bolded font indicates that the log has not previously been expor ted to Google Earth. 4. Select the track log you want to expo rt to Google Earth and click the Export to button. A preview of the selected track is shown on the watch display in the Suunto T rack Exporter application win dow . NOTE: a track preview is not available on the [...]

78 9. SUUNTOSPORTS.COM SuuntoS ports.com is an Internet community for all Suunto sports instrument users. It is a service that adds a new dimension to your sport an d to the way in which you use your sports instrument. In SuuntoS ports you can share your bes t experiences and the data measured during your activi ties with other sports particip ants[...]

79 9.2. SECTIONS SuuntoS ports.com includes three sections for different levels of privacy . My Suunto is your personal area that other user s do not have access to, Communities includes functions for groups, and S ports Forums contain information that members have published for all SuuntoS ports visi tors. This is a short description of the functi[...]

80 published in a community is only visible to the members of the community . Communities can be either open or closed. T o pa rticipate in the activities of a closed community , you first have to be invited or you have to apply for membership and be accepted. All communities have a home page that lists the latest group activities such as news, dis[...]

81 10. T ECHNICAL SPECIFICATIONS General • Operating T emperature -20 °C to +60 °C/-5 °F to +140 °F • S torage T emperature -30 °C to +60 °C/-22 °F to +140 °F • Weight 76 g • W ater-resistant to 10 bar according to ISO 2281 standard • Mineral crystal glass • Rechargeable battery Memory • 50 routes (a route can include up to 50[...]

82 1 1. GPS DA TUM LIST Suunto X10 offers the use of several different GPS datums that can be activated with the Suunto T rek Manager software with the help of the PC interface. Here is the list of available GPS datums and the number c odes used in the activation process For information about activating GPS dat ums, refer to Suunto Trek Manager . F[...]

83 025 EUR-T T unisia 026 LEH Ghana 027 LIB Liberia 028 MAS Eritrea 029 MER Morocco 030 MIN-A Cameroon 031 MIN-B Nigeria 032 MPO Gabon 033 NSD Algeria 034 OEG Old Egypt 035 P TB Mean Solution (Burkina Faso and Niger) 036 PTN Congo 037 SCK Namibia 038 SRL Sierra Leone 039 VOR Algeria 040 AIN-A Bahrain Island 041 AIN-B Saudi Arabia 042 BA T Sumatra 0[...]

84 057 NAH-B United Arab Emirates 058 NAH-C Saudi Arabia 059 F A H Oman 060 QA T Qatar 061 SOA Singapore 062 TIL Brunei and East Malaysia (Sarawak and Saba h) 063 T OY -M Mean So lution (Japan, Okinawa and South Korea 064 TOY -A Japan 065 TOY -C Okinawa 066 TOY -B South Korea 067 AUA Australia and T asmania (Australian Geodetic 1966) 068 AUG Austra[...]

85 088 OGB-D W ales 089 MOD Sardinia 090 SPK-A Hungary 091 SPK-B Poland 092 SPK-C Czechoslovakia 093 SPK-D Latvia 094 SPK-E Kazakhstan 095 SPK-F Albania 096 SPK-G Romania 097 CCD Czechoslovakia 098 CAC Mean Solution (Florida and Bahamas 099 NAS-C Mean Solution (CONUS) 100 NAS-B Western USA 101 NAS-A Eastern USA 102 NAS-D Alaska (excl uding Aleutian[...]

86 120 NAR-E Aleutian Islands 121 NAR-B Canada 122 NAR-C CONUS 123 NAR-H Hawaii 124 NAR-D Mexico and Central America 125 BOO Columbia 126 CAI Argentina 127 CHU Paraguay 128 COA Brazil 129 PRP-M Mean Solution (Bo livia, Chile, Columbia, Ecuador , Guyana, Peru and V enezuela) 130 PRP-A Bolivia 131 PRP-B Northern Chile ( near 19deg S) 132 PRP-C Southe[...]

87 151 SAN-L V enezuela 152 ZAN Suriname 153 AIA Antigua, Leeward Islands 154 ASC A scension Island 155 SHB S t. Helena Island 156 BER B ermuda Islands 157 DID Deception Island, Antarctica 158 FOT Nevis, S t. Kitts, Leeward Islands 159 GRA Faial, Graciosa, Pico, Sao Jo rge and T e rceira Islands (Azores) 160 ISG South Georgia Islands 161 LCF Cayman[...]

88 183 IBE Efate and Erromango Island s 184 CAO Phoenix Islands 185 CHI Chatham Islands (New Z ealand) 186 GIZ Gizo Island (N ew Georgia Islands) 187 EAS Easter Islands 188 GEO New Zealand 189 GUA Guam 190 DOB Guadalcanal Island 191 JOH Johnston Islan d 192 KUS Caroline Islands, F ed.S tates of Micronesia 193 LUZ-A Philippines (excluding Mindanao I[...]

89 215 VOI T unisia/Algeria 216 VOI-2 T unisia/Algeria 217 Y AC Uruguay 218 RT90 Sweden 254 KKJ Kartta Koordinaatisto Järjestelmä, Finland 255 WGS84 Global WGS84 coordinate system (This is the default datum and the most widely used degree- based coordina te system.)[...]

90 12. LOCAL GRID LIST Suunto X10 offers the use of several dif ferent local grids that can be activated with the Suunto T rek Manager software with the help of the PC interface. Here is the list of available local grids and the number codes u sed in the activation process. Y ou can activate grids with Suunto X10 or Suunto Trek Manager . For inform[...]

91 13. GLOSSAR Y Alarm point Position coordinates of a spe cific point on a rout e or in the MyPoints function that you can use, for example, to warn you about r ocks and other hazards. Altitude difference (dif) Altitude differ ence between your current position and the next waypoint in the un it of your choice. Bearing (bea) Compass direction from[...]

92 you to locate or report on a specific poin t on the map. Heading (hea) Compass direction on the present course. Latitude Angular distance North or South of the Equator . Longitude Angular distance W est or East of the prime meridian. Navigation T raveling between two locatio ns on a route with knowledge of the cur rent position in relation to th[...]

93 14. DISCLAIMERS 14.1. USER ’S RESPONS IBILITY Do not use Suunto X10 as the only navigati on aid. Use all avail able navigation aids such as charts, compass, visual sightings etc. and comp are them with the Suunto X10 navigation information. Make sure all co nflicting information is resolved before continuing with navigation. This instrument is[...]

94 purchaser and only covers failures due to def ects in materials and workmanship that occur during normal use while in the period of the warr anty . It does not cover battery , battery replacement, damage or failu res resulting from accident, misuse, neglect, mis handling, alteration or modifications of the product, or any failure caused by opera[...]

95 This device complies with Part 15 of the FC C limits for class B digital devices. This equipment generates, uses, and can radiat e radio frequency energy and, if not installed or used in accordance with the inst ructions may cause harmful interference to radio communications. There is no guarantee t hat interference will not occur in a particula[...]

Suunto Canada[...]

Suunto Oy 7/2008[...]