Siemens PANEL PC 877 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Siemens PANEL PC 877, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Siemens PANEL PC 877 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Siemens PANEL PC 877. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Siemens PANEL PC 877 should contain:
- informations concerning technical data of Siemens PANEL PC 877
- name of the manufacturer and a year of construction of the Siemens PANEL PC 877 item
- rules of operation, control and maintenance of the Siemens PANEL PC 877 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Siemens PANEL PC 877 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Siemens PANEL PC 877, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Siemens service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Siemens PANEL PC 877.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Siemens PANEL PC 877 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    SIMATIC Industrial PC SIMATIC Panel PC 877 DOCUMENT A TION DOCUMENT A TION Panel PC 877 simatic Industrial PC Operating Instructions Edition 07/2006[...]

  • Page 2

    [...]

  • Page 3

    Foreword 1 Safety information 2 Description 3 Application planning 4 Installation 5 Connecting 6 Integration into an automation system 7 Commissioning 8 Operation and configurat ion 9 Operation 10 Functions 11 Maintenance and service 12 Alarm, error and system messages 13 Troubleshooting/FAQs 14 Technical data 15 Dimension drawings 16 Detailed de s[...]

  • Page 4

    Safety Guidelines This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property. The notices r eferring to your perso nal safe ty are highlighted in the manual by a sa fety alert symbol, notices referring only to property damage have no safety alert symbol. These notices sho w[...]

  • Page 5

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 iii Table of contents 1 Foreword ..................................................... ............................................................... ............................ 1-1 1.1 Overview ................................................... ........................[...]

  • Page 6

    Table of contents SIMATIC Panel PC 877 iv Operating instructions, Release 07/2006, A5E00877780-01 7 Integration into an automati on syst em ........................ ............................................................... ............. 7-1 7.1 Overview ................................................... ......................................[...]

  • Page 7

    Table of contents SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 v 11 Functi ons ................................................... ............................................................... ............................ 11-1 11.1 Overview .................................................. ........................[...]

  • Page 8

    Table of contents SIMATIC Panel PC 877 vi Operating instructions, Release 07/2006, A5E00877780-01 14 Troubleshoot ing/FA Qs ........................................ ............................................................... ................... 14-1 14.1 General problems .......................................... ...............................[...]

  • Page 9

    Table of contents SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 vii A Appendi x..................................................... ............................................................... ............................. A-1 A.1 Certificates and guidelines ................................ .......................[...]

  • Page 10

    Table of contents SIMATIC Panel PC 877 viii Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 11

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 1-1 Foreword 1 1.1 1.1 Overview Purpose of the manual These operating instructions con tain all the information you n e ed for commissioning and using the SIMATIC Panel PC 877. It is intended both for programming and testing personnel who c ommission the device and connect[...]

  • Page 12

    Foreword 1.1 Overview SIMATIC Panel PC 877 1-2 Operating instructions, Release 07/2006, A5E00877780-01 Position in the information landscape The documentation for the Panel PC include s the following secti ons: • SIMATIC Panel PC 877, Operating In structions (compact) with the following information: – Commissioning – Legal information • SIM[...]

  • Page 13

    Foreword 2.1 Safety information SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 2-3 Safety information 2 2.1 2.1 Safety information Warning Emergencies In the event of a device fault, i nterrupt the power supply imme diately. Inform the customer service personnel respon sible. Malfunctions can oc cur when the operator c[...]

  • Page 14

    Foreword 2.1 Safety information SIMATIC Panel PC 877 2-4 Operating instructions, Release 07/2006, A5E00877780-01 Electrical connection Warning Disconnect the device from the ma ins before every intervention. Do not touch power lines or data transm ission lines during elec trical storms and do not connect any cables. System expansions Only install s[...]

  • Page 15

    Foreword 2.1 Safety information SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 2-5 Handling and disposal of lithium batteries Warning Danger of explosion and the re lease of harmful substance s! Do not throw lithium batteries i nto fire, do not solder onto th e cell body, do not open, do not short circuit, do not rever[...]

  • Page 16

    Foreword 2.2 General information SIMATIC Panel PC 877 2-6 Operating instructions, Release 07/2006, A5E00877780-01 2.2 2.2 General information Overview Caution The device is approved for operation in closed room s only. The guarantee is void if this stipulation is ignored. Avoid extreme environment al operating conditions. Protect your device agains[...]

  • Page 17

    Foreword 2.2 General information SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 2-7 Tools & downloads Please check regularly if updates and h otfixes are available fo r download to your device. Downloads are available o n the Internet at http://www.siemens.c om/asis under "Support". Click on "Softwar[...]

  • Page 18

    Foreword 2.2 General information SIMATIC Panel PC 877 2-8 Operating instructions, Release 07/2006, A5E00877780-01 Sources of light Notice Position the screen so that it i s not subject to direct sunligh t or other strong sources of light. Defective pixels in the display At present, the manufacturing proc ess of modern displays does n ot guarantee t[...]

  • Page 19

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 3-1 Description 3 3.1 3.1 Design Design Figure 3-1 Panel PC 877 1 Computer unit 2 Control unit Brief description The device is available with di fferent control units which are distinguis hed by the size of the display and by the membrane ke yboard or touch screen.[...]

  • Page 20

    Description 3.1 Design SIMATIC Panel PC 877 3-2 Operating instructions, Release 07/2006, A5E00877780-01 Keyboard variants • Color display with backlight ing: – 12'' TFT technology with 800 x 60 0 resolution – 15'' TFT technology with 1024 x 7 68 resolution • Membrane keyboard with alphanumeric keys, numeric keys, cu rsor[...]

  • Page 21

    Description 3.2 Technical features SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 3-3 3.2 3.2 Technical features General features Slots for add-ons • 2x PCI long • 2x PCI/ISA shared long • 1x ISA long • Note: The RAID1 option takes one PCI slot. Graphic VIA ProSavage 8 Graphics memory 8, 16 or 32 MB taken from [...]

  • Page 22

    Description 3.2 Technical features SIMATIC Panel PC 877 3-4 Operating instructions, Release 07/2006, A5E00877780-01 Configurati on options Power supply • 100V/240V AC, 360 W; wide range; with bridgin brief power failures in accordance with NAM UR: maximum 20 ms at 0.85 x U n (U n = rated voltage) • 24 V DC, 265 VA, optional, o nly in connection[...]

  • Page 23

    Description 3.3 Accessories SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 3-5 3.3 3.3 Accessories The accessories comprise the following comp onents: Accessories Comment Order No. Direct control key module 6AV7671-7DA00-0AA 0 Film for protecting the touch screen panel against dirt and scratches for 15" touch scre[...]

  • Page 24

    Description 3.3 Accessories SIMATIC Panel PC 877 3-6 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 25

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-1 Application planning 4 4.1 4.1 Overview Introduction This section describes the first s teps after unpackaging, the p ermitted mounting positions and the fixation. This section de scribes the necessary consider ations for EMC. Field of application The Panel PC is an in[...]

  • Page 26

    Application planning 4.2 Unpacking and checking the deli very SIMATIC Panel PC 877 4-2 Operating instructions, Release 07/2006, A5E00877780-01 4.2 4.2 Unpacking and checking the delivery Procedure 1. Please check the packagin g mater ial for transport damage upon d elivery. 2. If any transport damage is pres ent at the time of delivery , lod ge a c[...]

  • Page 27

    Application planning 4.3 Device identification data SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-3 4.3 4.3 Device identification data Procedure 1. Write down the Microsoft Windows Product Key of the Certificate of Authenticity COA in the table at the end of this section. The COA label is only pre sent in preinstall[...]

  • Page 28

    Application planning 4.4 Mounting Positions and Fastenin g SIMATIC Panel PC 877 4-4 Operating instructions, Release 07/2006, A5E00877780-01 4.4 4.4 Mounting Positions and Fastening 4.4.1 Installati on guidelines Before installing the device, read the following gene ral notes relating to installation. Warning Danger, high voltage Isolate the power s[...]

  • Page 29

    Application planning 4.4 Mounting Positions and Fastenin g SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-5 Note The computer unit with AC power s upply satisfies fire protectio n requirements to EN60950-1. It may therefore be in stalled without additional fir e-proofing measures. • Provide adequate volu me in the [...]

  • Page 30

    Application planning 4.4 Mounting Positions and Fastenin g SIMATIC Panel PC 877 4-6 Operating instructions, Release 07/2006, A5E00877780-01 4.4.2 Permitted mounting positions Approval Certain mounting positions are a pproved for the equipment that comprises one control unit and one computer unit. Permitted mounting positions r r V[...]

  • Page 31

    Application planning 4.4 Mounting Positions and Fastenin g SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-7 4.4.3 Type of fixation The computer unit is secured in the mounting cut-out either wit h clamps or screws. Select the type of fixation suitabl e to your requirements for t he degree of protection (see Section P[...]

  • Page 32

    Application planning 4.4 Mounting Positions and Fastenin g SIMATIC Panel PC 877 4-8 Operating instructions, Release 07/2006, A5E00877780-01 4.4.4 Protection against dust and water Principle The degree of protection pr ovid ed at the front is assured when the mounting seal lies completely against the mounting cut-out. Caution Please ensure that the [...]

  • Page 33

    Application planning 4.5 Mounting cut-out SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-9 4.5 4.5 Mounting cut-out 4.5.1 Preparing the mounting cut-out The following illustration sh ow the dimensions for the mounting cut-out. / / / / 6 6 / / 6 6 / / / / / $ 6 / /[...]

  • Page 34

    Application planning 4.5 Mounting cut-out SIMATIC Panel PC 877 4-10 Operating instructions, Release 07/2006, A5E00877780-01 Table 4-1 Dimensions for t he mounting cut-out in mm Control unit L1 L2 L3 1) L 4 1) L5 L6 2) L 7 2) L 8 2) L 9 2) A1 A2 S1 S2 S3 S4 S5 3) S 6 3) S7 3) Tolerance +1 +1 ±0.2 ±0.5 ±0.5 ±0.5 ±0.5 +1 ±1 ±1 ±1 ±1 ±1 ±1 K[...]

  • Page 35

    Application planning 4.5 Mounting cut-out SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 4-11 4.5.2 Mounting dep th of the device Panel PC with operator units T Key panel with 12" TFT 192 mm Key panel with 15" TFT 211 mm Touch panel with 15" TFT 209 mm Touch panel with 19" TFT 217 mm 7 Note Addition[...]

  • Page 36

    Application planning 4.6 EMC directive SIMATIC Panel PC 877 4-12 Operating instructions, Release 07/2006, A5E00877780-01 4.6 4.6 EMC directive Electromagnetic compatibility The device fulfills the requireme nts of the EMC law of the Fede ral Republic of Germany as well as the EMC directive o f the Single European Market. The device is designed as a[...]

  • Page 37

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 5-1 Installation 5 5.1 5.1 Securing the device with clamps You require 6 clamps in order to mount the device with a 12"/15 " display. A device with a 19" display must be mounted with 8 clamps. The required numbe r of clamps is included in your Panel PC deliv[...]

  • Page 38

    Installation 5.1 Securing the device with clamps SIMATIC Panel PC 877 5-2 Operating instructions, Release 07/2006, A5E00877780-01 IP 65 degree of protection The plant builder is respo nsible for the correct installation o f the device. The degree of protection IP 65 is only guaranteed for the front of the device if the ring seal is properly applied[...]

  • Page 39

    Installation 5.2 Securing the device with screws SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 5-3 5.2 5.2 Securing the device with screws Note To secure the 19" front panel wit h sc rews, backing plates with Order No. 6AV7672-8KE00- 0AA0 are required on the front. Drilling holes Steps for drilling holes 1 Drill [...]

  • Page 40

    Installation 5.2 Securing the device with screws SIMATIC Panel PC 877 5-4 Operating instructions, Release 07/2006, A5E00877780-01 Rack installation Steps for fastening the device w ith screws 1 Make drill holes a t the prepar ed mounting cut-out in accordanc e with the specif ications for L4 and L5, as shown at the dimensio ns in the mounting cut-o[...]

  • Page 41

    Installation 5.2 Securing the device with screws SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 5-5 IP 54 degree of protection The IP54 degree of protection is guaranteed for screw mounting together with the ring seal. Caution Observe the panel seal when mounting Ensure you do not damage the panel seal when mounting th[...]

  • Page 42

    Installation 5.2 Securing the device with screws SIMATIC Panel PC 877 5-6 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 43

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 6-1 Connecting 6 6.1 6.1 Connection and operator control components Connection and operator control components of the computer unit Connection and operator contr ol components of th e left-hand sid e of the device Item Name Description (1) PCI / ISA 5 slots for PCI/ISA exp[...]

  • Page 44

    Connectin g 6.1 Connection and operator cont rol components SIMATIC Panel PC 877 6-2 Operating instructions, Release 07/2006, A5E00877780-01 Reset button The Reset key ca n trigger the following function durin g active operation: Hardware reset: Immediate shutdow n of the device without correc t shutdown of the operating system This function is use[...]

  • Page 45

    Connectin g 6.1 Connection and operator cont rol components SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 6-3 Connection components of the control unit USB connection contr ol unit Item Name Description  (1) USB 1 connection USB 2.0 high current (500 mA) under sealing flap (not availabl e with every product variant[...]

  • Page 46

    Connectin g 6.2 Connecting the 100 V to 240 V AC power supply SIMATIC Panel PC 877 6-4 Operating instructions, Release 07/2006, A5E00877780-01 6.2 6.2 Connecting the 100 V to 240 V AC power supply General connection information Note the following in order to operate th e device safely and ac cording to regulation: Note Voltage range The power suppl[...]

  • Page 47

    Connectin g 6.2 Connecting the 100 V to 240 V AC power supply SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 6-5 Power Factor Correction The power supply contains an acti ve PFC (Power Factor Correctio n) circuit to conform to the EMC guidelines. Uninterruptible AC power syste ms (UPS) must supply a sinusoidal output v[...]

  • Page 48

    Connectin g 6.3 Connecting the 24 V DC power supply SIMATIC Panel PC 877 6-6 Operating instructions, Release 07/2006, A5E00877780-01 6.3 6.3 Connecting the 24 V DC power supply General connection information Note the following in order to operate th e device safely and ac cording to regulation: Notice Power supply The device must only be connected [...]

  • Page 49

    Connectin g 6.4 Connecting the equipo tential bondin g circuit SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 6-7 6.4 6.4 Connecting the equipotential bonding circuit A low resistance ground conne ct ion ensures that interference si gnals g enerated by external power supply cables, signal cabl es or cables to the I/O m[...]

  • Page 50

    Connectin g 6.4 Connecting the equipo tential bonding circuit SIMATIC Panel PC 877 6-8 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 51

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 7-1 Integration into an automation system 7 7.1 7.1 Overview Introduction The following options are availa ble for integrating the device in existing or planned system environments and networks. Ethernet The integrated Ethernet interfa ce can be used for communication and [...]

  • Page 52

    Integration into an automation system 7.2 Device in a SIMA TIC S7 configuration SIMATIC Panel PC 877 7-2 Operating instructions, Release 07/2006, A5E00877780-01 7.2 7.2 Device in a SIMATIC S7 configuration 7.2.1 MPI/PROFIBUS-DP network You can connect the device to a SIMATIC S7 automation system or a PROFIBUS DP network via the MPI/DP interface . Y[...]

  • Page 53

    Integration into an automation system 7.2 Device in a SIMATIC S7 configuration SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 7-3 7.2.2 Connecting an S7 automation system Coupling The device is coupled via the MPI/DP interface as foll ows: • With MPI networks S7-200, S7-300, and S7-400 • PROFIBUS DP networks with D[...]

  • Page 54

    Integration into an automation system 7.3 Networking via I ndustrial Ethernet SIMATIC Panel PC 877 7-4 Operating instructions, Release 07/2006, A5E00877780-01 7.3 7.3 Networking via Industrial Ethernet You can establish a network bet ween the device and other comput ers via Industrial Ethern et. The on-board LAN is a Twisted-P a ir (TP) interface f[...]

  • Page 55

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-1 Commissioning 8 8.1 8.1 Overview Checklist Before starting up t he device for the first time, go through th e following checklist: • Have you taken into account the proper ambient and environmenta l conditions for the device, as described in the Technical data? • H[...]

  • Page 56

    Commissioning 8.2 Switch on the device SIMATIC Panel PC 877 8-2 Operating instructions, Release 07/2006, A5E00877780-01 8.2 8.2 Switch on the device Procedure 1. Plug the power plug of the suppli ed power supply cab le in the A C/DC power supply connector of the computer unit. 2. Lock the power plug in place. 3. Plug the power supply cable of t he [...]

  • Page 57

    Commissioning 8.3 Setting up the Microso ft Windows operat ing system SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-3 8.3 8.3 Setting up the Microsoft Windows operating system Introduction The setup wizard appea rs immedi ately following the startup of t he device. The wizard is used to set the parameters of the ope[...]

  • Page 58

    Commissioning 8.4 Installing applications and dri vers SIMATIC Panel PC 877 8-4 Operating instructions, Release 07/2006, A5E00877780-01 8.4 8.4 Installing applications and drivers Introduction After the device is restarted, d ifferent dialogs appear on the screen. Drivers and appli cations can be installed from these dialog s. Additional hardware a[...]

  • Page 59

    Commissioning 8.4 Installing applications and dri vers SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-5 Setting the touch screen This step only applies to contro l units with touch scre en panel s. 2. In the following dialog, click on the screen size that c orrespo nds to your device. You will find details of the scr[...]

  • Page 60

    Commissioning 8.4 Installing applications and dri vers SIMATIC Panel PC 877 8-6 Operating instructions, Release 07/2006, A5E00877780-01 Figure 8-3 Touch screen panel, end Panel Wizard 4. New hardware, the touc h controller, is found. In order to start the touch calibration, c lick on "OK". Carry out the following steps carefully: Figure 8[...]

  • Page 61

    Commissioning 8.4 Installing applications and dri vers SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-7 Setting the key panel This section applies only to cont rol units with key pa nels. 6. Click on "Finish" to end the Panel Wizard. Figure 8-5 Keyboard panel, end Panel Wizard 7. Exit the operating syst em [...]

  • Page 62

    Commissioning 8.4 Installing applications and dri vers SIMATIC Panel PC 877 8-8 Operating instructions, Release 07/2006, A5E00877780-01 The installation of the drivers and applications is co mplete. F urther information is available i n the "Operation and configuration" chapter in the section, "Addi tional drivers and applications.&q[...]

  • Page 63

    Commissioning 8.5 BIOS settings SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-9 8.5 8.5 BIOS settings A USB keyboard is not fully avail able before Windo ws starts up. There are not restrictions to using a USB keyboard wh en editing the BIOS. To be able to selec t a boot menu before Windows starts, however, conne ct[...]

  • Page 64

    Commissioning 8.6 Microsoft Windo ws operating sys tem SIMATIC Panel PC 877 8-10 Operating instructions, Release 07/2006, A5E00877780-01 8.6 8.6 Microsoft Windows operating system 8.6.1 Enables The device is approved for use with the following ope rating sys tems : Approvals • Windows 2000 Professiona l Multi-Language SP4 and higher, Germ an , En[...]

  • Page 65

    Commissioning 8.6 Microsoft Windo ws operating system SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-11 8.6.2 Windows 20 00 Professional Restrictions Notice If you have an external PS/2 key board and a USB keyboard connec ted at the same time, the keyboard LEDs on the ext ernal keyboards may not b e correctly re fres[...]

  • Page 66

    Commissioning 8.6 Microsoft Windo ws operating sys tem SIMATIC Panel PC 877 8-12 Operating instructions, Release 07/2006, A5E00877780-01 8.6.3 Windows XP Professional Restrictions Note If you have an external PS/2 key board and a USB keyboard connec ted at the same time, the keyboard LEDs on the ext ernal keyboards may not b e correctly re freshed [...]

  • Page 67

    Commissioning 8.7 USB SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 8-13 8.7 8.7 USB Introduction Commercially available US B peripherals can be easil y and flexib ly connected via the USB interface. For example, you can connect an external USB keyboar d and a USB mouse. If the USB keyboard has a USB interfac e, you c[...]

  • Page 68

    Commissioning 8.7 USB SIMATIC Panel PC 877 8-14 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 69

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-1 Operation and configuration 9 9.1 9.1 Normal operation 9.1.1 Switch on the device Requirements • The peripheral devices are conne cted. Caution To comply with the EMC guideline of the device with I/O, ensure that the manufacturer or supplier of the components used gu[...]

  • Page 70

    Operation and configuration 9.1 Normal operation SIMATIC Panel PC 877 9-2 Operating instructions, Release 07/2006, A5E00877780-01 Procedure Warning Danger of incorrect operations! The following applies to external input devi ces or combinations of external input devices and control units with key panels: A mbiguou s key codes can cause se rious mal[...]

  • Page 71

    Operation and configuration 9.1 Normal operation SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-3 9.1.2 Logging on to the operating system via the ons creen keybo ard (OSK) The logon dialog is displayed wh en you have assigned an adminis trator password. Note A screen keyboard appea rs for devices with touch screen p[...]

  • Page 72

    Operation and configuration 9.1 Normal operation SIMATIC Panel PC 877 9-4 Operating instructions, Release 07/2006, A5E00877780-01 9.1.3 Switching off the device Introduction To turn off the device, shut it down and disconnect the device from the power supply. Procedure 1. Exit the operating system se ssion of the device properly. Caution When using[...]

  • Page 73

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-5 9.2 9.2 Additional Drivers and Applications 9.2.1 Overview The necessary drivers a nd applicat ions are containe d in the supplied "Documentation and Drivers" CD. Note The supplied drivers an[...]

  • Page 74

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-6 Operating instructions, Release 07/2006, A5E00877780-01 9.2.2 Calibrating the touch screen, UPDD Call • Start menu "Start", command "Programs > UPDD > Settings" Function Recalibrates the touch screen. If the touch screen does not[...]

  • Page 75

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-7 Warning Maloperation If you touch the touch screen whil e the screen saver is ac tive, the SIMATIC process visualization software, e.g. Wi nCC, will carry out the function s which happ en to be behind [...]

  • Page 76

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-8 Operating instructions, Release 07/2006, A5E00877780-01 9.2.3 Enable/disable touch functionality The procedure for deactivating and reactivating the to uch funct ionality using the "UPDD" software is described in the table below. No. Procedure 1 O[...]

  • Page 77

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-9 No. Procedure 5 To start up the touch functionality again, you must mark the corresponding touch controlle r in the "Devices" tab and activate the option "Show inactive PnP devices"[...]

  • Page 78

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-10 Operating instructions, Release 07/2006, A5E00877780-01 9.2.4 Windows Securit y Center (Windows XP Pr ofessional only) Call • Start menu "Start", command "Se ttings > Control panel > Securit y Center" Function The Windows Securi[...]

  • Page 79

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-11 Alarms Click on "Change the way Security Center alerts me" to switch o ff security alarms upon switching on the device. The "Alert Settings" dialog ap pears. D eactivate the desire[...]

  • Page 80

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-12 Operating instructions, Release 07/2006, A5E00877780-01 9.2.5 KeyTools (for ke y panel devices only) SIMATIC KeyTools is one selecti on of the applications for your Panel PC. These applications allow you to adapt key codes t hat are sent by the key panel o[...]

  • Page 81

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-13 9.2.6 Screen keyboard (for touch panel device only) You can operate the device by means of a virtual screen keyboar d. You can use it to enter the characters directly on the touch screen or with an ex[...]

  • Page 82

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-14 Operating instructions, Release 07/2006, A5E00877780-01 9.2.7 Setbrightness Start "Set brightness" symbol o n the desktop. Function The intensity of the backlighti ng is adjusted usi ng "Set bright ness." Figure 9-4 Setbrightness[...]

  • Page 83

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-15 9.2.8 CheckLanguageID Scope The following applies to Windo ws 2000 Professional Multi-Langua ge and Windows XP Professional Multi-Langua ge. Call c:driverschecklang checklangid.exe o r reinstallati[...]

  • Page 84

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-16 Operating instructions, Release 07/2006, A5E00877780-01 9.2.9 Multilingual setting s for the operating system Windows MultiLanguage M UI operating system enables users to set the language of the GUI to their individual preference. Some elements are not loc[...]

  • Page 85

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-17 Notice If you use a different keyboard la yout to "Englisch/USA interna tional", the internal keyboard codes will no longe r be correct. Start > Control Panel > Date, T ime, La nguage,[...]

  • Page 86

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-18 Operating instructions, Release 07/2006, A5E00877780-01 9.2.10 DVD ROM/CD RW The DVD-ROM/CD-R W drive is an optional feature. Recording met ho ds supported by the disk drive: Disc at o nce, Track at once, S ession at once, Packe t writing, whereby Disc at [...]

  • Page 87

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 9-19 9.2.11 USB keyboard controller The USB keyboard controller supports th e following additional f unctions for key model s: • Keyboard programming with the "KeyTo ols" application • Adjust[...]

  • Page 88

    Operation and configuration 9.2 Additional Drivers and Applications SIMATIC Panel PC 877 9-20 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 89

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-1 Operation 10 10.1 10.1 Status displays The two LEDs on the upper left hand side of the front panel dis play the operating status: • LED "POWER" green: Active voltage • LED "TEMP" orange: The temperat ure threshold has been ex ceeded; the maximu[...]

  • Page 90

    Operation 10.2 General control eleme nts SIMATIC Panel PC 877 10-2 Operating instructions, Release 07/2006, A5E00877780-01 10.2 10.2 General control elements On / Off switch On / Off switch Description The On/Off switch does not d isconnect the device from supply voltage. When the switch is in 0 position (Off), the device is still connected to the [...]

  • Page 91

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-3 10.3 10.3 Device with key panel The device has the following ke ypads: • 2 x 8 vertical keypads with softkey fun ctions • 2 x 10 horizontal keypads with function keys F1 -F20 The number of keys, their labeling a nd function is[...]

  • Page 92

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-4 Operating instructions, Release 07/2006, A5E00877780-01 10.3.1 Using the keyboard The membrane keyb oard is divided into different funct ional grou ps: • Function keys and softke ys with LEDs • Control keys • Alphanumeric keys • Numeric ke ys • Cursor keys Function keys The f[...]

  • Page 93

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-5 Control keys The control keys activate editi ng functions and co ntrol functio ns in different applications:             Figure 10-4 Control keys, taking t he 15" control unit as a[...]

  • Page 94

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-6 Operating instructions, Release 07/2006, A5E00877780-01 Alphanumeric keys Enter letters, special character s, blank spaces and underline u sing the alphanumeric keys.   Figure 10-5 Alphanumeric keys (1) Underline (2) space character Toggling between lower-case and upper-case lett[...]

  • Page 95

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-7 Numeric keys Enter the numerals "0" to "9" and special characters, e.g. the decimal point, using the pre- defined assignment of the numeric keys. Figure 10-6 Numeric keys Enter special characters, arithmetic si[...]

  • Page 96

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-8 Operating instructions, Release 07/2006, A5E00877780-01 Cursor keys Navigate, scroll or move the writ ing mark using the cursor ke ys . The cursor keys correspon d to the usual keys of the PC keyboard.        Figure 10-7 Cursor keys (1) <Left> key (2) <Up&[...]

  • Page 97

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-9 External keyboards The keyboard layout has been set to "English/USA international. " If you use a keyboard with a layout other than the "English/ USA international" layout, the key codes of the internal and ext[...]

  • Page 98

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-10 Operating instructions, Release 07/2006, A5E00877780-01 10.3.2 Using the direct control key module The direct control key module is a module that is intended for use with the SIMATIC Panel PC 877 (exclusively for variants with an integral membran e keyb oard). Digital events can be as[...]

  • Page 99

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-11 Example: The keyboard code s, that are sent when any key is op erated, are stored in a code table. The initial status of the table is as follows: Table 10-1 Keyboard codes Keys: Keyboard code: All standard PC keys "English i[...]

  • Page 100

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-12 Operating instructions, Release 07/2006, A5E00877780-01 Changing the defaults The program "KeyPad.exe" can be used to assign each key individ ually with special key codes. The following example sho ws the layout of the 15" Panel PC keyb oard variant after starting the r[...]

  • Page 101

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-13 Explanation: The key labelled F13 outpu ts the key code LSHIFT+F1 and sets digital i nput DI 0.0 when the direct key module is used. For further information about u sing the tool, visit the Interne t page http://www.siemens.com/a[...]

  • Page 102

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-14 Operating instructions, Release 07/2006, A5E00877780-01 10.3.3 Labelling functi on keys and softkeys Area of application This section applies only to cont rol units with key pa nels. Introduction The control unit has two horizont al and two vertical keypads As sign user specific funct[...]

  • Page 103

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-15 Procedure 1. Label the DIN A4 film with a lase r printer, for example, using the print format templates for MS Word on the Document ation and Dri vers CD. 2. Cut the labeling strips along the pre-pri nted lines. Note Do not inser[...]

  • Page 104

    Operation 10.3 Device with ke y panel SIMATIC Panel PC 877 10-16 Operating instructions, Release 07/2006, A5E00877780-01 10.3.4 Using the integrated mouse The position on which you press the middle round butt on of the integrated mouse determines the direction in which the cursor moves. The amount of pressure determines the speed of the cursor. Alt[...]

  • Page 105

    Operation 10.4 Device with touch screen SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-17 10.4 10.4 Device with touch screen The 15" variant and the 19" vari ant differ in their dimensions and the size of the display. The 19" variant has no drill ho le covers on the sides. The following figure is only[...]

  • Page 106

    Operation 10.4 Device with touch screen SIMATIC Panel PC 877 10-18 Operating instructions, Release 07/2006, A5E00877780-01 10.4.1 Using the touch screen On the display that is touch-sensitive due to the touch sensor, application-specific user interface elements, for example buttons, are displayed. When yo u tap the command button with your finger, [...]

  • Page 107

    Operation 10.5 Disk drive SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 10-19 10.5 10.5 Disk drive Introduction The device is equipped with a 3.5" floppy drive a s standard. Yo u can use the floppy drive to save programs and data and transf er data from the floppy disk t o the device. Diskette types The follows d[...]

  • Page 108

    Operation 10.6 Transferring authori zations SIMATIC Panel PC 877 10-20 Operating instructions, Release 07/2006, A5E00877780-01 10.6 10.6 Transferring authorizations Authorizations of HMI software are provided on diskette. Transf er these, if required, from the built-in diskette drive.[...]

  • Page 109

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 11-1 Functions 11 11.1 11.1 Overview The following individual functions are im plemented: • Temperature monitoring an d over /under temperature indication • Watchdog • Fan monitoring Messages can be output from the monitoring modules to the appli cations. The SOM sof[...]

  • Page 110

    Functions 11.2 Safecard on Motherboard (SOM ) SIMATIC Panel PC 877 11-2 Operating instructions, Release 07/2006, A5E00877780-01 11.2 11.2 Safecard on Motherboard (SOM) The "Safecard On Motherboard" s oftware is available on the "Doc umentation and Drivers" CD. Before this software is insta lled, previousl y installed Dia gMonito[...]

  • Page 111

    Functions 11.2 Safecard on Motherboard (SOM ) SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 11-3 Here the current temperature and limit values are shown. You ca n toggle the temperature dis play mode to indic ate either the curr ent temperature, or the min./max. v alues measur ed since the start o f the application. ([...]

  • Page 112

    Functions 11.3 Temperature monitoring SIMATIC Panel PC 877 11-4 Operating instructions, Release 07/2006, A5E00877780-01 11.3 11.3 Temperature monitoring Temperature monitoring The temperature is recorded by means of three thermocouples. On e thermocouple monitors the processor temperature, another the temperature in the area near the processor m od[...]

  • Page 113

    Functions 11.4 Watchdog (WD) SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 11-5 11.4 11.4 Watchdog (WD) Function The watchdog monitors the program e xecution and reports a progr am crash to the user by means of various reactions . The watchdog is idle when the PC is switched on or after a HW-R ESET(cold restart), i.e.[...]

  • Page 114

    Functions 11.5 Fan monitoring SIMATIC Panel PC 877 11-6 Operating instructions, Release 07/2006, A5E00877780-01 11.5 11.5 Fan monitoring This function monitors operation of the housing an d processor f ans. When a fan fails, the following reactions are triggered: Response Option SOM or DiagMonitor softw are is activated None The temperature error i[...]

  • Page 115

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-1 Maintenance and service 12 12.1 12.1 Servicing Scope of maintenance When working in areas wh ere ther e is dust that may be hazardous to functionality, the device must be operated in a cont rol cabinet with a h eat exchan ger or with suitable su pply air. Note Dust de[...]

  • Page 116

    Maintenance and service 12.1 Servicing SIMATIC Panel PC 877 12-2 Operating instructions, Release 07/2006, A5E00877780-01 Chemical stability Caution Adhere to the information regardi ng chemical resistance of the panel front. Please go to http://www.siemens.com/asis u nder "Tools & Downloads" for more information. Enter the article ID [...]

  • Page 117

    Maintenance and service 12.2 Replacement parts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-3 12.2 12.2 Replacement parts The device has the following repl acement parts: Replacemen t part Order No. Key panel 12''-TFT 15''-TFT Touch panel 15''-TFT 19''-TFT 6AV7672-1AB00-0AA [...]

  • Page 118

    Maintenance and service 12.3 Separating the control unit from the computer unit SIMATIC Panel PC 877 12-4 Operating instructions, Release 07/2006, A5E00877780-01 12.3 12.3 Separating the control unit from the computer unit Introduction The control unit is separated from the computer unit to carry o ut repairs or to replace the control unit, for exa[...]

  • Page 119

    Maintenance and service 12.3 Separating the control unit from the computer unit SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-5 5. Loosen cable s K1 to Kx and the USB cable between the computer u nit and the control unit 6. Two mounting rails are screwed onto the computer unit whose an g led ends (4) are located in[...]

  • Page 120

    Maintenance and service 12.3 Separating the control unit from the computer unit SIMATIC Panel PC 877 12-6 Operating instructions, Release 07/2006, A5E00877780-01 Separating the device in an uninstalled state As an alternative, dismount the device completely and separate the control unit and computer unit from one another in an uninsta lled state. S[...]

  • Page 121

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-7 12.4 12.4 Installing and removing hardware components 12.4.1 Repairs Notice Similar to figure The images presented below de vi ate slightly from the actual dev ice in some respects. Carrying ou[...]

  • Page 122

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-8 Operating instructions, Release 07/2006, A5E00877780-01 12.4.2 Open the device Caution Work on the open device may onl y be carried out by authori zed a nd qualified personnel. Within the warranty time, you are only allowed to install expan sions fo[...]

  • Page 123

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-9 Open the device Steps for opening the device 1 Remove the five screws (1). 2 Swing the lid to the front and remove it.[...]

  • Page 124

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-10 Operating instructions, Release 07/2006, A5E00877780-01 12.4.3 Installing and re moving memory modules Memory expansion The motherboard is equipped with 2 slots for memory modules. 184 pin DDR266 or PC2700 memory modules can be u sed, unbuffered, n[...]

  • Page 125

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-11 Installing a memory module How to install a memory module 1 Open the device. 2 Note the recess and po larity reversal protection on the connector side of the memory module. 3 Push the module c[...]

  • Page 126

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-12 Operating instructions, Release 07/2006, A5E00877780-01 12.4.4 Installing PCI / AT cards 12.4.4.1 Notes on the modules Notes on module specifications The device is designed for use with modules conforming to AT/PC I specifications. PCI modules with[...]

  • Page 127

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-13 12.4.4.2 Installing / removing expansion modules Preparation Disconnect the device from mains. Installing expansion modules How to install an expansion module (PCI / AT format): 1 Open the dev[...]

  • Page 128

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-14 Operating instructions, Release 07/2006, A5E00877780-01 Inserting the slider To insert the slider: How to install a module h olding-down device 1 Push the slider through the guide slot until it is seated firmly on the module. Insert the module into[...]

  • Page 129

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-15 12.4.4.3 Exchanging the RAID controller PCI card Introduction The RAID system uses the following controllers: • System with SATA drives: Promise Fast Track TX2300 Principle The RAID controll[...]

  • Page 130

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-16 Operating instructions, Release 07/2006, A5E00877780-01 12.4.5 Disk drives 12.4.5.1 Options of installing disk drives Drive bay module for hard disk drives, optical drives and flopp y disk drives DVD-ROM/CD-RW drive bay Pos Description (1) DVD-ROM/[...]

  • Page 131

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-17 Drive bays for two 2.5" har d disks Pos Description (1) Hard disk drive bay for 2.5" hard disks (2) Two mounting slots for 2.5" hard disks Drive bay for floppy disk drive Pos De[...]

  • Page 132

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-18 Operating instructions, Release 07/2006, A5E00877780-01 12.4.5.2 Installing / removing a drive bay Preparations Disconnect the device from m ains and unplug all cables. Remove the hard disk bay Steps for removing the drive bay 1 Remove the four scr[...]

  • Page 133

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-19 Removing drive bays for floppy disk drives Steps for removing the floppy disk drive bay 1 Remove the four screws (1) 2 Remove the ha rd drive bay and place it onto the device.[...]

  • Page 134

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-20 Operating instructions, Release 07/2006, A5E00877780-01 Steps for removing the floppy disk drive bay 3 Remove the da ta cable between the floppy disk drive (1) and the motherboard and its power supply connector (2). Remove the screw (3) and open th[...]

  • Page 135

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-21 12.4.5.3 Removing and installing an optical drive Procedure 1. Unscrew the 4 screws (1) holding the drive and slide the dri ve out.   Figure 12-4 Installing and removi ng the optical dri[...]

  • Page 136

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-22 Operating instructions, Release 07/2006, A5E00877780-01 Figure 12-5 Drive connecto rs 2. Loosen the 2 screws (1) of the drive housing. Figure 12-6 Drive with housing 3. Flip up the housing cover (1) 90°.[...]

  • Page 137

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-23 Figure 12-7 Drive removed, housing flippe d up 4. Remove the conne ctor of the ribb on cable from the socket (2). 5. Loosen the 3 screws ( 3) with a TX6 key. 6. Remove the drive (4) from the b[...]

  • Page 138

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-24 Operating instructions, Release 07/2006, A5E00877780-01 12.4.5.4 Removing and installing a 3.5" hard disk Procedure 1. Unscrew the 4 screws fr om the drive housing and slide the dri ve out. The drive is secured to the underside of t he drive h[...]

  • Page 139

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-25 12.4.6 Replacing the backup battery Note Batteries are wearing part s and should be replaced every fi ve y ears in order to ensure proper functioning of the PC. To be noted before you replace [...]

  • Page 140

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-26 Operating instructions, Release 07/2006, A5E00877780-01 Preparation Note The configuration data of the device are deleted when the batte ry is replaced. 5. Note down the current settings of the BIOS Setup. A list in which you can note down this inf[...]

  • Page 141

    Maintenance and service 12.4 Installing and remo ving hardware compone nts SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-27 12.4.7 Removing/Instal ling the Power Supply Warning Only qualified personnel is authorized to exchange the powe r su pply module. Preparations 1. Disconnect the device from m ains and unplug [...]

  • Page 142

    Maintenance and service 12.4 Installing and removi ng hardware comp onents SIMATIC Panel PC 877 12-28 Operating instructions, Release 07/2006, A5E00877780-01 How to remove the power supply module 5 Disconnect the power supply connector from the motherboard. 6 Pull the power supply module out to the front. 7 Also remove the four screws holding the s[...]

  • Page 143

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-29 12.5 12.5 Installing Software 12.5.1 General installation procedure If the system is unstable or if the operating system reports e r rors, the delivery status of the device can be easil y restored us ing the Restore DV[...]

  • Page 144

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-30 Operating instructions, Release 07/2006, A5E00877780-01 12.5.2 Setting up the partiti ons for Windows operating systems After you have installed a new hard disk, or if partitions are faulty, or when you wish to change the partitioning on your hard di sk, you need to create [...]

  • Page 145

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-31 Note Once you have changed the co nfigur ation of your hard disk with DiskPart, you will need to reboot the PC for the cha nges to go into effect. Boot again from the Recovery C D to format the partitions. Format prima[...]

  • Page 146

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-32 Operating instructions, Release 07/2006, A5E00877780-01 12.5.3 Compatibility of the Restore DVD Caution Use only the supplied Rest ore DV Ds for the device. Verify that the orde r number of the Restore DVD matches that of the device. You can find the order number of the dev[...]

  • Page 147

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-33 12.5.4 Restoring the factory state of the software using the Re store DVD You can restore the software to the original factory state using the Restore CD (not included in all package variants). The DVD contains the nec[...]

  • Page 148

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-34 Operating instructions, Release 07/2006, A5E00877780-01 Restoring the factory state with an external USB CD/DVD ROM Procedure: 1. Connect the external USB CD/DV D ROM to the Panel PC and reboot the device. 2. Activating the Legacy Support in the BIOS – Press the <F2>[...]

  • Page 149

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-35 12.5.5 Installing Micros oft Windows operating systems 12.5.5.1 Operating system not installed The device can be optionally purch ased without an o perating sys tem. If you want to install the operating system y oursel[...]

  • Page 150

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-36 Operating instructions, Release 07/2006, A5E00877780-01 12.5.5.2 Booting from the Recovery CD Please use the Recovery CD to i nstall Windows to meet your spec ial requirement s. The operating system used is Windows P reinstall Environment (WinPE) . You will also need the su[...]

  • Page 151

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-37 12.5.5.3 Installing the Microsoft Windows operating syst em (not for RAID) The recovery CD contains encry pted data that can only be tra nsf erred to this system. Please use the Recovery CD to i nstall Windows to meet [...]

  • Page 152

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-38 Operating instructions, Release 07/2006, A5E00877780-01 12.5.5.4 Installing the Microsoft Windows operating syst em (for RAID) RAID Recovery Notes on RAID systems (Optional) To install the operating system w ith the RAID option, the follo wing steps mus t be carried out: 1.[...]

  • Page 153

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-39 12.5.6 Installing individual drivers Introduction The "Documentation and Drive rs" CD contains the required driver s for the device. Procedure 1. Start "Start.exe" in the ro ot directory of the CD. [...]

  • Page 154

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-40 Operating instructions, Release 07/2006, A5E00877780-01 12.5.7 Operation of two hard disks The two hard disks are configur ed as follows in the factory sta te of the computer: Hard disk 0 Hard disk 1 Partition C: System, NTFS, 10 GB Partition D: Data, NTFS, remaining capaci[...]

  • Page 155

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-41 12.5.7.2 RAID system with Prom ise Fast Track Controller TX2300 RAID 0 system A RAID 0 system (Stripe) enables you to increase the read/write speed of yo ur hard disk system. This configur ation reduces the re liabilit[...]

  • Page 156

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-42 Operating instructions, Release 07/2006, A5E00877780-01 Functions for RAID system management The preinstalled software of the RAID system offers enhanced functions for using and managing the RAID system. SATA-RAID software is started via "Start > Programs > Promi[...]

  • Page 157

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-43 Configuring a RAID 1 system Prerequisites • Two identical SATA hard disks; t he primary hard disk contains t he operating system and data (boot drive), the se co nd hard disk is empty. • If the DiagMonitor has been[...]

  • Page 158

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-44 Operating instructions, Release 07/2006, A5E00877780-01 12.5.7.3 Installing the RAID Controller software The procedure for inst alling the software c an be found in the R AID user manual on the supplied Documentation and Drive rs CD. Note concerning Windows 2000 Professiona[...]

  • Page 159

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 12-45 12.5.8 Installing burner and DVD software The supplied CD provides informa tion about installation of the burner and DVD software.[...]

  • Page 160

    Maintenance and service 12.5 Installing Software SIMATIC Panel PC 877 12-46 Operating instructions, Release 07/2006, A5E00877780-01 12.5.9 Backing up the hard disk The device's hard disk is divide d into two partitions, volumes C and D. The ope rating system is installed on volume C. Volum e D can be used for user data. Back up the complete ha[...]

  • Page 161

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 13-1 Alarm, error and system messages 13 13.1 13.1 Boot error messages During startup (the boot process ), the BIOS first performs a P ower O n S elf T est (POST) and checks whether certain functional units of the PC are operating error-free. When an error occurs within th[...]

  • Page 162

    Alarm, error and system messages 13.1 Boot error messages SIMATIC Panel PC 877 13-2 Operating instructions, Release 07/2006, A5E00877780-01 On-screen error messa ge Meaning / s uggestions Keyboard error Check whether the keyboard is properly connected . Key seizure Check whether a key on the keyboard has seized. System RAM Failed at o ffset: Memory[...]

  • Page 163

    Alarm, error and system messages 13.2 Introduction to the BIOS beep codes SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 13-3 13.2 13.2 Introduction to the BIOS beep codes The device performs a self-tes t when it is switched on. If an e rror is detected during the POST (Power On Self Test), a series of beep signals are[...]

  • Page 164

    Alarm, error and system messages 13.2 Introduction to the BIOS beep codes SIMATIC Panel PC 877 13-4 Operating instructions, Release 07/2006, A5E00877780-01 Special codes The following special code are provided in addition to the beep codes: Special cod e Meaning 3x short The <Ins> key is pre ssed during the system start: The on-board d evice [...]

  • Page 165

    Alarm, error and system messages 13.3 BIOS beep codes SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 13-5 13.3 13.3 BIOS beep codes The following section lists the POST codes relevant to users in the sequence in whi ch they occur: Contact Customer Support for all other POST codes. Hex code of the beep codes Meaning Des[...]

  • Page 166

    Alarm, error and system messages 13.3 BIOS beep codes SIMATIC Panel PC 877 13-6 Operating instructions, Release 07/2006, A5E00877780-01 Special codes The following Beep codes are a vailable in addition to t he liste d POST codes: • 3 x short INSERT key is pressed on system start: If an external graphics card on the bus board is not detected, you [...]

  • Page 167

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 14-1 Troubleshooting/FAQs 14 14.1 14.1 General problems This chapter provide s you with tips on how to localize and trou bleshoot frequent ly occurring problems. Problem Possi ble causes To correct or avoid error There is no power supply to the device. • Check the power [...]

  • Page 168

    Troubleshooting/FAQs 14.2 Problems when Usin g Modules of Third-party Ma nufacturers SIMATIC Panel PC 877 14-2 Operating instructions, Release 07/2006, A5E00877780-01 14.2 14.2 Problems when Using Modules of Third-party Manufacturers Problem P ossible causes To correct or avoid error Check your computer configuration: • If the computer configur a[...]

  • Page 169

    Troubleshooting/FAQs 14.3 Temperature limits SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 14-3 14.3 14.3 Temperature limits Cause If the device is used for its in tended purpose, the temperature threshold values are not exceeded or fallen below. When the LED "Temp" on the upper left side of the operator con[...]

  • Page 170

    Troubleshooting/FAQs 14.3 Temperature limits SIMATIC Panel PC 877 14-4 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 171

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-1 Technical data 15 15.1 15.1 General technical data General techni cal data AC device: Supply voltage 100 to 240 V AC (85 to 265 V AC) DC device: Supply voltage 24 V DC (20.4 to 28. 8 V DC) SELV AC device: Frequency 50 - 60 Hz (47 to 63 Hz) Transient voltage interrupti[...]

  • Page 172

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 15-2 Operating instructions, Release 07/2006, A5E00877780-01 General techni cal data Electromagnetic com patibility (EMC) AC device: Emitted interferenc e EN 55011 Clas s A, EN 61000-3-2 Class D EN 61000-3-3 DC device: Emitted interf eren ce EN 55022 Class A Noise immunity: Mains born[...]

  • Page 173

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-3 General techni cal data Motherboard Processor Intel ® Pentium 4 2.8 GHz Intel ® Celeron 2 GHz Intel ® Pentium 4 Mobile 2.2 GHz Internal processor cache Inte l ® Pentium 4 2.8 GHz, 512 KB Intel ® Celeron 2 GHz, 128 KB In[...]

  • Page 174

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 15-4 Operating instructions, Release 07/2006, A5E00877780-01 General techni cal data PROFIBUS/MPI interface electrically isolated 3) • Transmission rate • Mode groups • Physical port – Memory address area – Interrupts 9-pin sub-D socket • 9.6 Kbps to 12 Mbps, c onfigur ed [...]

  • Page 175

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-5 General techni cal data Panel PC 877 12" TFT Key front 15" TFT Key front 15" TFT Touch screen 19" TFT Touch screen Service life of backlighting 50,000 h for 24 hours per day usage, temper ature depe ndent[...]

  • Page 176

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 15-6 Operating instructions, Release 07/2006, A5E00877780-01 General techni cal data Safety Protection class Protection cl ass I to IEC 60536, i.e.: Device with PE ground terminal Standards IEC 60950-1, EN 60950- 1, DIN EN 6095 0-1, EN 61131-2 Approvals AC device: cULus in acc o rdanc[...]

  • Page 177

    Technical data 15.1 General technical d ata SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-7 Permissible temperature ranges depending on the installation method Panel P C 877 Complete unit Internal cabinet temperature Ambient temperature cabinet Comment Installed in cabinet different temperatures 50 °C 40 °C 1)4) [...]

  • Page 178

    Technical data 15.2 Power requirement s of the components SIMATIC Panel PC 877 15-8 Operating instructions, Release 07/2006, A5E00877780-01 15.2 15.2 Power requirements of the components Standard system Voltage Components +5 V +3.3 V +12 V -5 V -12 V 5 Vaux Motherboard 1.3 A 4.8 A 0.2 A 0.03 A 0.3 A Intel ® Pentium 4 Desktop or Celeron processor w[...]

  • Page 179

    Technical data 15.3 Device with AC volta ge supply SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-9 15.3 15.3 Device with AC voltage supply Technical data Input voltage 100 to 240 V AC (85 to 264 V AC) Frequency 50 - 60 Hz Power consumption 360 W Power failure buffering 20 ms Maximum continuous output power 230 W De[...]

  • Page 180

    Technical data 15.4 Device with DC volta ge supply SIMATIC Panel PC 877 15-10 Operating instructions, Release 07/2006, A5E00877780-01 15.4 15.4 Device with DC voltage supply Technical data Input voltage 24 V DC ( 20.4 to 28.8 V DC) Power consumption 265 W Power failure buffering 1 ms at nominal voltage Maximum continuous output power 180 W Degree o[...]

  • Page 181

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-11 15.5 15.5 Keyboard table Key codes The following table applies only to control units with key pane ls. It contains all characters that can be entered in SIMATIC KeyT ools in the "Key code table" area and under "User s[...]

  • Page 182

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 15-12 Operating instructions, Release 07/2006, A5E00877780-01 Name Code (Hex) 0x Check-b ox Display/function i I 0C — i L Shift/R Shift I R A l t í R Alt+L Shift/R Shift Í j J 0D — j L Shift/R Shift J k K 0E — k L Shift/R Shift K l L 0F — l L Shift/R Shift L R A l t ø R Alt+L Shift/[...]

  • Page 183

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-13 Name Code (Hex) 0x Check-b ox Display/function r R 15 — r L Shift/R Shift R R A l t ® L Gui/R Gui Display "Run" dialog s S 16 — s L Shift/R Shift S R A l t ß R Alt+L Shift/R Shift § L Ctrl/R Ctrl Save t T 17 — t L[...]

  • Page 184

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 15-14 Operating instructions, Release 07/2006, A5E00877780-01 Name Code (Hex) 0x Check-b ox Display/function 1 ! 1E — 1 L Shift/R Shift ! R A l t ¡ R Alt+L Shift/R Shift ¹ 2 @ 1F — 2 L Shift/R Shift @ R A l t ² 3 # 20 — 3 L Shift/R Shift # R A l t ³ 4 $ 21 — 4 L Shift/R Shift $ R A[...]

  • Page 185

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-15 Name Code (Hex) 0x Check-b ox Display/function - _ 2D — - L Shift/R Shift _ R A l t ¥ = + 2E — = L Shift/R Shift + R A l t × R Alt+L Shift/R Shift ÷ [ { 2F — [ L Shift/R Shift { R A l t « ] } 30 — ] L Shift/R Shift } R A[...]

  • Page 186

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 15-16 Operating instructions, Release 07/2006, A5E00877780-01 Name Code (Hex) 0x Check-b ox Display/function Caps Lock 39 — Caps L ock F1 3A — F1 L Shift/R Shift F13 L Ctrl/R Ctrl S5 F2 3B — F2 L Shift/R Shift F14 L Ctrl/R Ctrl S6 F3 3C — F3 L Shift/R Shift F15 L Ctrl/R Ctrl S7 F4 3D ?[...]

  • Page 187

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 15-17 Name Code (Hex) 0x Check-b ox Display/function Home 4A — Home Page Up 4B — Page Up Delete 4C — Delet e End 4D — End Page Down 4E — Page Down Right Arrow 4F — Right Arrow Left Arrow 50 — Left Arrow Down Arrow 51 — Dow[...]

  • Page 188

    Technical data 15.5 Keyboard table SIMATIC Panel PC 877 15-18 Operating instructions, Release 07/2006, A5E00877780-01 Name Code (Hex) 0x Check-b ox Display/function Left Control E0 — Left Control Left Shift E1 — Left Shift Left Alt E2 — Left Alt Left GUI E3 — Left GUI Right Control E4 — Right C ontrol Right Shift E5 — Right Shift Right [...]

  • Page 189

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 16-1 Dimension drawings 16 16.1 16.1 Panel PC 877 dimensional drawing $ % . PP , - + * ) & ( ' Figure 16-1 Panel PC 877 dimension drawing[...]

  • Page 190

    Dimension drawings 16.1 Panel PC 877 dimensional dra wing SIMATIC Panel PC 877 16-2 Operating instructions, Release 07/2006, A5E00877780-01 0 / 1 Figure 16-2 Panel PC 877 dimension drawing, computer unit swung away from control unit Table 16-1 Panel PC 877 dimensions in mm Key panels Touch screen fr ont Control unit 12" TFT 15" TFT 15&quo[...]

  • Page 191

    Dimension drawings 16.2 Dimensional drawing s for the installation of expansion mo dules SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 16-3 16.2 16.2 Dimensional drawings for the installation of expansion modules Figure 16-3 AT module Figure 16-4 Lon g format PCI module[...]

  • Page 192

    Dimension drawings 16.2 Dimensional drawing s for the installation of expansion mod ules SIMATIC Panel PC 877 16-4 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 193

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-1 Detailed descriptions 17 17.1 17.1 Motherboard 17.1.1 Structure and functions of the motherboard The essential compo nents of the motherboard are the processor a nd the chip set, two slots for memory modules, internal and exte rnal interfaces and the Fl ash BIOS. (1) [...]

  • Page 194

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-2 Operating instructions, Release 07/2006, A5E00877780-01 17.1.2 Technical featu res of the motherboard Component / interface Description Character istics Chip set Single chip set VIA P4N266A (VT8703A and VT8235) BIOS Update by means of softwar e Phoenix NuBIOS V4, modified by Siemens C[...]

  • Page 195

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-3 1) Galvanic isolation within the sa fety extra-low voltage circuit (SELV) 2) Optional product feature 3) Depends on the CPU type 4) Depends on the selected devi ce configuration[...]

  • Page 196

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-4 Operating instructions, Release 07/2006, A5E00877780-01 17.1.3 Position of the ports on the motherboard Interfaces The motherboard of the device f eatures the following interfaces : • Interfaces for the connection of external devices • Interfaces for internal comp onent s (drives,[...]

  • Page 197

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-5 17.1.4 External interfaces Interface Positio n Connecto r Description COM1 Externa l X30 25-pin socket, V.24/V.28 COM2 Externa l X31 9-pin, standard connector LPT1 Externa l - 25-pin, standard socket PS/2 mouse Externa l X22 6-pi[...]

  • Page 198

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-6 Operating instructions, Release 07/2006, A5E00877780-01 Serial interface COM 1, X30 The serial interface (COM 1) on the de vice has the following pi nout: Serial interface COM 1 (socket) PinNo. Abbreviatio n Meanin g Input/Output 1 – Shielding – 2 TxD (D1) Serial transmit data Out[...]

  • Page 199

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-7 COM 2 serial interface (V24/Mouse), X31 The serial interface (COM 2) ha s the following pinout: COM 2 serial interface (V24/M ouse) PinNo. Abbreviatio n Meanin g Input/Output 1 DCD (M5) Receiving signal lev el carrier Input 2 RxD[...]

  • Page 200

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-8 Operating instructions, Release 07/2006, A5E00877780-01 LPT1 parallel interface, X134 The parallel interface (LPT 1) has the followin g pinout: Parallel interfac e LPT1 PinNo. Abbreviatio n Meanin g Input/Output 1 / Strobe (CLK) Data message Output (open collector) 2 Data - Bit 0 Data[...]

  • Page 201

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-9 PS/2 mouse interface, X22 Pin assignment of the interface: PS/2 Pin No. Abbreviati on Meaning Input/Output 1 DAT Data channel, mouse Input/output 2 – Not assigned – 3 GND Ground – 4 P5VFK + 5 V (fused) Output 5 CLK Clock ch[...]

  • Page 202

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-10 Operating instructions, Release 07/2006, A5E00877780-01 PROFIBUS/MPI interface, X400 The PROFIBUS/MPI socket has the following pinout: PROFIBUS/MPI interface 1) PinNo. Abbreviatio n Meanin g Input/Output 1 – Not assigned – 2 – Not assigned – 3 LTG_B Signal line B of MPI modul[...]

  • Page 203

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-11 Ethernet RJ45 connection, X700 Ethernet RJ45 connection PinNo. Abbreviatio n Meanin g Input/Output 1 T D+ Transmitted data Output 2 T D- Transmitted data Output 3 RD+ Received data Input 4, 5 1) SYMR Internal 75 Ohm terminating [...]

  • Page 204

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-12 Operating instructions, Release 07/2006, A5E00877780-01 DVI interface, X303 The DVI socket has the following pinout: DVI interface PinNo. Abbreviatio n Meanin g Input/Output S GND Ground – S1 GND Ground – C1 R Red Output C2 G G reen Output C3 B Blue Output C4 HSYNC Horizontal syn[...]

  • Page 205

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-13 17.1.5 Front interfaces Overview Interface P osition Connector Description Display (LVDS) Internal X300 Connection of LCD displays with LVDS interface (channel 1) Display (LVDS) Internal X310 Connection of LCD displays with LVDS[...]

  • Page 206

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-14 Operating instructions, Release 07/2006, A5E00877780-01 Display interface (1st LVDS channel), X300 Pin No. Abbreviation Meaning Input/Output 1 P5V_D_fused +5V (fused) display VCC Output 2 P5V_D_fused +5V (fused) display VCC Output 3 RXIN0- LVDS output signal bit 0 (-) Output 4 RXIN0+[...]

  • Page 207

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-15 Display interface (2nd LVDS channel), X310 Pin No. Abbreviation Meaning Input/Output 1 GND Ground - 2 GND Ground - 3 RXIN10- LVDS input sig nal bit 0 (-) Output 4 RXIN10+ LVDS input signal b it 0 (+) Output 5 GND Ground Output 6[...]

  • Page 208

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-16 Operating instructions, Release 07/2006, A5E00877780-01 I/O front interface for operator panels, X44 This interface carries all sig nals required for the conne ction of operator panels in addition to the display and USB interface. T he maximum cable length is 50 c m at a USB data rat[...]

  • Page 209

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-17 Assignment of the display to the display select pins The display select inputs are used to configure one of 15 possi ble displays automatically. The display select inputs are equipped with pull-up resi stors, i.e., these inputs [...]

  • Page 210

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-18 Operating instructions, Release 07/2006, A5E00877780-01 17.1.6 Internal interfaces Pin assignment of the internal interfaces Interface P osition Connector Description Memory I nternal X3, X4 2 DIMM sockets, 64-Bit Processor Internal X1 Socke t for FCPGA mobile processor Bus expansion[...]

  • Page 211

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-19 Interface P osition Connector Description On / Off switch Internal X53 Swit ches off the power supply on t he secondary side, the AUX voltage is not switched off. LVDS channel 1 Internal X300 LVDS display interface for 12 to 1 9[...]

  • Page 212

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-20 Operating instructions, Release 07/2006, A5E00877780-01 Connection for optical drive, X12 Pin No. Abbreviation Meaning Input/Output 1 Reserved Reserved - 2 Reserved Reserved - 3 Reserved Reserved - 4 GND Ground - 5 Reset Reset signal Input/Output 6 D8 Data signal D8 Input/Output 7 D7[...]

  • Page 213

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-21 Interface to floppy disk drive, X26 This interface is designed for co nnecting a standard floppy dri ve. The maxi mum length of the data cable should not exceed 40 cm. Pin No. Abbreviation Meaning Input/Output 1 GND Ground - 2 D[...]

  • Page 214

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 17-22 Operating instructions, Release 07/2006, A5E00877780-01 Pinout of the CPU fan po wer supply, X41 Pin No. Abbreviation Meaning Input/Output 1 GND Ground - 2 +12 V Switche d power supply Output 3 CPU FAN_CLK Clock signa l Input Pinout of the main fan power supply, X42 Pin No. Abbreviat[...]

  • Page 215

    Detailed descriptions 17.1 Motherboard SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-23 Pinout of the internal USB interface connector, X2033 Pin No. Abbreviation Meaning 1 VCC 3.3V +3.3V, fused 2 VCC 5V + 5 V, fused 3 USB3 USB3_M 4 USB5 USB5_M 5 USB3 USB3_P 6 USB5 USB5_P 7 GND Ground 8 GND Ground 9 GND Ground 10 G[...]

  • Page 216

    Detailed descriptions 17.2 Bus board SIMATIC Panel PC 877 17-24 Operating instructions, Release 07/2006, A5E00877780-01 17.2 17.2 Bus board 17.2.1 Layout and principle of operation The bus board is designed as a lin k between the motherboard and the expansion modules. It is mounted with two screws. The bus board has two PCI expansion slots ( 2x lon[...]

  • Page 217

    Detailed descriptions 17.2 Bus board SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-25 17.2.2 Assignment of the PCI IR Q channels to the PCI slots Assignment of the PCI IRQ channels to the PCI slots Box PC 840 V2 PCI modules inter rupt assig nment (PCI IRQ) in: Module interrupt (Pin No.) Slot 1 Slot 2 Slot 3 Slot 4 [...]

  • Page 218

    Detailed descriptions 17.2 Bus board SIMATIC Panel PC 877 17-26 Operating instructions, Release 07/2006, A5E00877780-01 17.2.3 Exclusive PCI hardware interrupt Applications demanding a high-pe rformance interrupt require a h igh-speed ha rdware interrupt reaction. The PCI hardware interrupt sho uld be used only by one resource in order to ensure hi[...]

  • Page 219

    Detailed descriptions 17.2 Bus board SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-27 17.2.4 ISA slot pin assignment Pin No. A bbreviation Type* Pin No. A bbreviation Type A1 IOCHCK# I B1 0V GND A2 SD 07 I/O B2 RESET DRV O A3 SD 06 I/O B3 + 5V VCC A4 SD 05 I/O B4 IRQ 9 I A5 SD 04 I/O B5 - 5V VCC A6 SD 03 I/O B6 Res[...]

  • Page 220

    Detailed descriptions 17.2 Bus board SIMATIC Panel PC 877 17-28 Operating instructions, Release 07/2006, A5E00877780-01 Pin No. Abbreviation Ty pe* Pin No. Abbrevi ation Type C1 -SBHE O D1 -MEMCS16 I C2 LA 23 I/O D2 -IOCS16 I C3 LA 22 I/O D3 IRQ 10 I C4 LA 21 I/O D4 IRQ 11 I C5 LA 20 I/O D5 IRQ 12 I C6 LA 19 I/O D6 IRQ 13 I C7 LA 18 I/O D7 IRQ 14 I[...]

  • Page 221

    Detailed descriptions 17.3 Operating system licenses SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-29 17.3 17.3 Operating system licenses Description: The supplied and in stalled Windows operat ing systems of the SIM ATIC PCs are full Windows versions without any function restrictions. The additio nal wording "[...]

  • Page 222

    Detailed descriptions 17.4 Cables SIMATIC Panel PC 877 17-30 Operating instructions, Release 07/2006, A5E00877780-01 17.4 17.4 Cables SIMATIC S7 cable for MPI/DP The 6ES7901-0BF00-0AA0 cable is used to connect the device to a SIMATIC S7 automation device. Refer to the "Integration" section for more information .[...]

  • Page 223

    Detailed descriptions 17.5 System resources SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-31 17.5 17.5 System resources 17.5.1 Currently allocated system resources All system re sources (hard ware addre sses, memo ry configuration, interrupt assignment, DMA channels) are a ssigned dynamic ally by the Windows OS, de[...]

  • Page 224

    Detailed descriptions 17.5 System resources SIMATIC Panel PC 877 17-32 Operating instructions, Release 07/2006, A5E00877780-01 17.5.2 System resources used by the BIOS/DOS The following table describes the system resources for the fact ory state of the device. 17.5.2.1 I/O address allocation I/O address (hex) Size (byte s) Description of the basic [...]

  • Page 225

    Detailed descriptions 17.5 System resources SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-33 I/O address (hex) Size (byte s) Description of the basic func tion Possible alternative function 02E8 02EF 8 Reserved 02F8 02FF 8 COM2 Switchable in Setup, then free 0300 031F 32 Unus ed 0320 032F 16 Unus ed 0330 033F 16 Un[...]

  • Page 226

    Detailed descriptions 17.5 System resources SIMATIC Panel PC 877 17-34 Operating instructions, Release 07/2006, A5E00877780-01 17.5.2.2 Interrupt Assignments Interrupt Description Comment IRQ0 System timer fixed IRQ1 Keyboard fixed IRQ4 Serial port COM1 2) IRQ8 Real-time clock (RTC) fixed IRQ9 Microsoft ACPI-Compliant System 1) IRQ13 Numeric proces[...]

  • Page 227

    Detailed descriptions 17.5 System resources SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-35 17.5.2.3 Memory address assignments PCI VGA modules can be operated with an expansion ROM of a size up to 48 K. Address from to Size Description of the basic function Possible alternat ive function 0000 0000 0007 FFFF 512K [...]

  • Page 228

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-36 Operating instructions, Release 07/2006, A5E00877780-01 17.6 17.6 BIOS setup 17.6.1 Overview BIOS SETUP p rogram The BIOS SETUP program is stor ed in the ROM BIOS. Information a bout the system configuration is stored in the battery-backed RAM of the de vice . You can use SETUP to set[...]

  • Page 229

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-37 17.6.2 Starting BIOS Setup Starting BIOS Setup Start the setup program as follows: Reset the device (warm or cold restart). In the figures shown, the default settings differ based on the device versions. With the default setting [...]

  • Page 230

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-38 Operating instructions, Release 07/2006, A5E00877780-01 17.6.3 BIOS setup menus The various menu s and submenus a re listed on the next pages. Yo u can obtain information on the selected SETUP item from t he "item-specific help" part o f the respective menu. 3KRHQL[%,266H[...]

  • Page 231

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-39 Menu layout The screen is divided into four sections. In the top part (4), you can select the me nu forms [Main], [Advanced], [Security ], [Power], [Boot Sequence], [Vers ion], [Exit]. In the left of the center section (3) you ca[...]

  • Page 232

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-40 Operating instructions, Release 07/2006, A5E00877780-01 17.6.4 Main menu 3KRHQL[%,266HWXS8WLOLW ,WHP6SHFLILF+HOS (6& ([LW 6HOHFW,WHP 6HOHFW0HQX  6HOHFW &KDQJH9DOXHV 6XE0HQX ) ) 6HWXS'HIDXOWV 6DYHDQG([LW (QWHU +HOS [...]

  • Page 233

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-41 Settings in the main menu In the main menu, you can move up and down to select the follow ing system configuration boxes by means of the [↑] up and [↓] down cursor keys: Array Meaning System Time For viewing an d setting the [...]

  • Page 234

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-42 Operating instructions, Release 07/2006, A5E00877780-01 Primary master, primary slave, secondary master, secondary slav e The system jumps to the followi ng submenu when you select this type of menu field: 3ULPDU0DVWHU>[...]

  • Page 235

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-43 Array Meaning Type The parameter s which you ca n select her e are usually saved on the respective IDE drive. The 'Auto' setting in th e 'Type' field means that these values are automatically read from the dri[...]

  • Page 236

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-44 Operating instructions, Release 07/2006, A5E00877780-01 "Memory cache" field The following context menu appear s wh en you sele ct the option “ Memory cache” in the main menu: Figure 17-5 "Memory Cache" field The cache is a high-sp eed memory buffer between the[...]

  • Page 237

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-45 "Boot options" field The following context menu appe ars when you select “Boot option s” in the main menu: Figure 17-6 "Boot Options" field Quick Boot Mode Some hardware tests are skipped to speed up the b[...]

  • Page 238

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-46 Operating instructions, Release 07/2006, A5E00877780-01 Example of a summary screen: Figure 17-7 Summary Screen (Example) The Summary screen appears when th e system boo t phase completes .[...]

  • Page 239

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-47 "Keyboard features" field The following submenu appears when you sele ct the option “Keybo ard features” in the main menu: Figure 17-8 "Keyboard Features" submenu (Exampl e) Numlock Switches Numlock on or [...]

  • Page 240

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-48 Operating instructions, Release 07/2006, A5E00877780-01 "Hardware options" field The following submenu, for exampl e, appears when you select “Ha rdware options” in the main menu: Figure 17-9 "Hard ware Options" submenu (Example) The parameters of the interface[...]

  • Page 241

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-49 Entry Meaning PCI-MPI/DP 1 Enables the CP5611-compatible M PI/DP interface. The res ources are ma naged by the BIOS PCI Plug&Play mechanism. [Enabled] The Ethernet interface on the motherboard is enab led. On-board Ethernet [[...]

  • Page 242

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-50 Operating instructions, Release 07/2006, A5E00877780-01 Entry Meaning On-chip USB A [Enabled] On-chip U SB A determines the function o f USB ports 0 and 1. On- chip USB A occupies PCI IRQ Chann el 1. On-chip USB A port 0 is located on the front interface s ocket X44, port 1 on the bot[...]

  • Page 243

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-51 17.6.5 Advanced menu Menu layout 3KRHQL[%,266HWXS8WLOLW ,WHP6SHFLILF+HOS ,QVWDOOHG26 (6& ([LW 5HVHW&RQILJXUDWLRQ'DWD 6HOHFW,WHP 6HOHFW0HQX  6HOHFW &[...]

  • Page 244

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-52 Operating instructions, Release 07/2006, A5E00877780-01 Settings in the Advanced menu Plug&Play means that all modules a re a utomatically detected and installed, providing they support the Plug&Play functionality. [Other] BIOS handles the entire Plug&Play cap ability, def[...]

  • Page 245

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-53 [Disabled] Disables Legacy Un iversal Serial Bus support USB legacy keyboard/mous e [Enabl ed] This function d etermine s whether a USB key board or USB mouse can be used with softwar e or tools on an MS -DOS platform (e.g. SIMAT[...]

  • Page 246

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-54 Operating instructions, Release 07/2006, A5E00877780-01 "I/O device configuration" submenu Figure 17-11 COM/LPT configuration su bmenu The resources used by an interface are released when you di sabl e the interface in question. The I/O addresses and in terrupts are pre-a ss[...]

  • Page 247

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-55 "PCI configuration" submenu Figure 17-12 PCI configurati on submenu (example)[...]

  • Page 248

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-56 Operating instructions, Release 07/2006, A5E00877780-01 "PCI Devices" field If the PCI devices field is selec ted, the following submenu app ears: Figure 17-13 PCI devices submenu, slot #1 [Enabled] The ROM option of the PCI module (if present) is enabled ROM scan option: [D[...]

  • Page 249

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-57 "IRQ resource exclusion" submenu 3KRHQL[%,266HWXS8WLOLW ,WHP6SHFLILF+HOS ,WHP6SHFLILF+HOS (6& ([LW 6HOHFW,WHP 6HOHFW0HQX  6HOHFW &KDQJH9DOXHV 6XE0HQX ) ) 6H[...]

  • Page 250

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-58 Operating instructions, Release 07/2006, A5E00877780-01 "PCI IRQ channels" field 3KRHQL[%,266HWXS8WLOLW ,WHP6SHFLILF+HOS ,WHP6SHFLILF+HOS (6& ([LW 6HOHFW,WHP 6HOHFW0HQX  6HOHFW &KDQJH9DOXHV 6XE0HQX ) ) 6HWXS&a[...]

  • Page 251

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-59 17.6.6 Security menu You can only edit the fields enc losed in square brackets. Two p asswords can be assi gned to protect your PC from unauthori z ed use. The Supervisor password can be used to restrict usage of the hard disk. F[...]

  • Page 252

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-60 Operating instructions, Release 07/2006, A5E00877780-01 Disabled The password i s disabled. Enabled Certain Setup f ields are thus c onfigurable by the user, including the user password. User password is The field resets automatica lly from [Disabled] to [Enabled] whe n the password i[...]

  • Page 253

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-61 17.6.7 Power menu This menu has the following layout. Figure 17-17 "Power" menu (Example) The Power menu offers a number of power saver mod es for environ mentally friendly computing: [Disabled] no energy-saving functio[...]

  • Page 254

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-62 Operating instructions, Release 07/2006, A5E00877780-01 17.6.8 B oot menu This menu allows you to assign a priority for the boot devices. Figure 17-18 Boot Menu 1) Intel® UNDI, PXE-2.0 is only di splayed if, beforehand , the Wake on LAN boot function has been set to "Enabled&quo[...]

  • Page 255

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-63 Figure 17-19 Boot menu (example) This screen shows all possible boot device s. The device taking highest priorit y is listed in the first line of the relevant gro up. Here again, you can change th e order of appearance as describ[...]

  • Page 256

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-64 Operating instructions, Release 07/2006, A5E00877780-01 17.6.9 Version menu This menu contains the informat ion you will ha ve to quote when you send us technical questions about your system. Figure 17-20 "Version" menu (Example)[...]

  • Page 257

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-65 17.6.10 Exit menu The setup program is always clo sed from this menu. Figure 17-21 Exit menu Save Changes & Exit All changes are saved; a system restart is carried out with the new parameters. Discard Changes & Exit All c[...]

  • Page 258

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-66 Operating instructions, Release 07/2006, A5E00877780-01 17.6.11 BIOS setup default settings Documenting your device configuration If you have changed any default settings in Setup, you can ente r them in the following table. You can then refer to these entri es for any future hardware[...]

  • Page 259

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 17-67 Keyboard Featu res Numlock On Key Click Disabled Keyboard auto-repeat rate 30/sec Keyboard auto-repeat delay ½ sec Hardware Options PCI-MPI/DP Enabled On-board Ethernet 1 Enabled Onboard Ethernet 1 Address 080 00624xxxx On-board[...]

  • Page 260

    Detailed descriptions 17.6 BIOS setup SIMATIC Panel PC 877 17-68 Operating instructions, Release 07/2006, A5E00877780-01 SATA/PATA Configuration PATA Controller: Enabled SATA Controller mode Enhanced AHCI Configuration Disabled RAID support Disabled Security Supervisor Password Is Disabled User Password is Disab led Set User Password Enter Set Supe[...]

  • Page 261

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 A-1 A Appendix A A.1 A.1 Certificates and guidelines A.1.1 Guidelines and declarations Notes on the CE marking The following appl ies to the SIMATIC product d escribed in this docume ntation : EMC directive AC voltage supply The devices with AC voltage su ppl y fulfill the[...]

  • Page 262

    Appendix A.1 Certificates and guidel ines SIMATIC Panel PC 877 A-2 Operating instructions, Release 07/2006, A5E00877780-01 Caution This is a system of Class A. The equipment may cause RF interfe rence in residential areas. In this case, the operating compan y may be held liable for taking appropriate measure s. Low-voltage directive The devices wit[...]

  • Page 263

    Appendix A.1 Certificates and guidel ines SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 A-3 A.1.2 Certificates and approvals DIN ISO 9001 certificate The quality assurance system for the entire product process (de velopment, production, and marketing) at Sieme ns fulfills the requirements of ISO 9001 (co rresponds to [...]

  • Page 264

    Appendix A.1 Certificates and guidel ines SIMATIC Panel PC 877 A-4 Operating instructions, Release 07/2006, A5E00877780-01 EMC USA Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the lim its for a Class A digital device, pursuan t to Part 15 of the FCC Rules. T hese li[...]

  • Page 265

    Appendix A.1 Certificates and guidel ines SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 A-5 A.1.3 Electrostatic charging of individuals Anyone who is not connected to t he electrical potential of thei r surroundings can be electrostatically charged. The figure below shows the maximum el ectrostatic voltages that can a[...]

  • Page 266

    Appendix A.2 Additional support SIMATIC Panel PC 877 A-6 Operating instructions, Release 07/2006, A5E00877780-01 A.2 A.2 Additional support Do you have additional questions regarding use of the described products, which are not answered in the docume ntation? Then, contact the Siemens repres entative or office nearest you. • Your Siemens represen[...]

  • Page 267

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 B-1 B ESD directives B B.1 B.1 ESD guideline What does ESD mean? Almost all electronic modules are equi pped with highly integrat ed components and element s in MOS technology. For technolog ical reasons, these electronic components are very sensitive to overv oltages and [...]

  • Page 268

    B ESD directives B.1 B.1 ESD guideline SIMATIC Panel PC 877 B-2 Operating instructions, Release 07/2006, A5E00877780-01 Precautions against electrostatic discharge Most plastics can be ch arged ea sily. Therefore, keep plastics a way from ESD components! When work ing with elec trostatic ally sensitiv e components , make sure that the person, the w[...]

  • Page 269

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 C-1 C List of abbreviations / acronyms C C.1 C.1 Abbreviations ANSI American Nati onal Standards Institute ASCII American Standard Code for Information Interchange B Width BIOS Basic Input Output System CD-ROM Compact Disc – Read Only Memory CPU Centra l Processing Unit [...]

  • Page 270

    List of abbreviations / acronyms C.1 Abbreviations SIMATIC Panel PC 877 C-2 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 271

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Glossary-1 Glossary ATAPI CD–ROM Drive AT -Bus A ttachment P acket I nterface (co nnected to A T bus) CD-ROM drive Automation device (AG) The programmable logical contro llers (PLC) of the SIMATIC S5 sy stem consist of a central controller, one or more CPUs, and v arious[...]

  • Page 272

    Glossary SIMATIC Panel PC 877 Glossary-2 Operating instructions, Release 07/2006, A5E00877780-01 Cache High-speed access buffer for in terim storage (buffering) of requested data. CE marking C ommunauté E uropéene The CE symbol confirms th e conformance of the product with all applicable EC directives, e.g. the EMC directive. Chipset Located on t[...]

  • Page 273

    Glossary SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Glossary-3 Device configuration The configuration of a PC or pro grammin g device contains info rm ation on hardware and device options, such as memory configuration, d rive types, moni tor, network address, etc. The data are stored in a configuration file and ena[...]

  • Page 274

    Glossary SIMATIC Panel PC 877 Glossary-4 Operating instructions, Release 07/2006, A5E00877780-01 Gender changer Using the gender change r (25-pin / 25-pin), the COM1/V24/AG interface of the SIMATIC PC family can be converted to the usual 25-pin male connector. Hard disks Hard disks represent a form of magnetic disk storage medium (Wi nchester drive[...]

  • Page 275

    Glossary SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Glossary-5 LAN L ocal A rea N etwork: LAN is a local network t hat consists of a group of comp uters and other devices that are distributed acros s a relative ly restricted ran ge and are linked with communication cable s. The devices connected to a LAN are called[...]

  • Page 276

    Glossary SIMATIC Panel PC 877 Glossary-6 Operating instructions, Release 07/2006, A5E00877780-01 Operating system Summarizing term describing all functio ns for program execution , allocation of system resources to the various user p rograms, and for controlling and monitoring consisten cy of the operating mode in cooperation with the hard ware (e.[...]

  • Page 277

    Glossary SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Glossary-7 Pixel PixEl ement (picture point). The pixel represents the smallest elemen t that can be reproduced on-screen or on a printer. Plug&Play Generally, a referen ce to the ability of a computer to automati cally configure the system for communication w[...]

  • Page 278

    Glossary SIMATIC Panel PC 877 Glossary-8 Operating instructions, Release 07/2006, A5E00877780-01 Restore DVD The Restore DVD is use d to res tore the system partition or the entire hard disk to factory state if the system has crashed. The bootable DVD contains all the necessary image files. You can also create a boot disk allowing re storation via [...]

  • Page 279

    Glossary SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Glossary-9 Windows Microsoft Windows is a multitaski ng graphical user interface. W indows provides a standard graphical interface based on drop-d own menus, windowed region s on the screen, and allows operation with a pointer device such as a mouse. WLAN W ireles[...]

  • Page 280

    Glossary SIMATIC Panel PC 877 Glossary-10 Operating instructions, Release 07/2006, A5E00877780-01[...]

  • Page 281

    SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Index-1 Index < <Shift> key, 10-6 A Abbreviations, C-1 AC voltage supply, A-1 Accessorie s, 3-5 Advanced menu BIOS setup, 17-51 Alarms, 9-10, 9-11 Allocation PCI IRQ channels, 17-25 Approval, 1-1, 8-10, 15-6 Approvals, A-3 Area of application, 1-1 Arithmetic symbo[...]

  • Page 282

    Index SIMATIC Panel PC 877 Index-2 Operating instructions, Release 07/2006, A5E00877780-01 On the key panel, 10-3 Control unit, 3-1, 3-2, 12-4, 15-6 Separating from the computer unit, 12-4 Convention, 1-2 couple, 7-3 Device, 7-3 Coupling with SIMATIC S7, 7-1 Cover foil, 3-5 Cursor key, 10-8 D Dash, 10-7 Data exchange, 7-1 Date, 17-41 BIOS setup, 17[...]

  • Page 283

    Index SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Index-3 Measuring, B-2 modify., B-2 Shipping, B-2 Ethernet, 3-3, 7-1 Ethernet address, 4-3 Exit, 8-7 Startup, 8-7 Exit menu, 17-65 Expansion Module, 12-13 PCI / AT cards, 12-13 Slots, 15-3 External interfaces, 17-5 F Factory state, 12-33 Fans Monitoring, 11-6 FAQs, 1[...]

  • Page 284

    Index SIMATIC Panel PC 877 Index-4 Operating instructions, Release 07/2006, A5E00877780-01 Key code, 15-11 Key panel, 8-7, 10-3 set, 8-7 Keyboard, 3-2, 10-9 BIOS setup, 17-47 BIOS setup, 17-47 External keyboard, 10-9 Features, 17-47 Keyboard table, 15-11 Keyboard variant, 3-2 Knurled screw, 12-4 L Labeling, 10-14 Function key, 10-14 Softkey, 10-14 [...]

  • Page 285

    Index SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Index-5 Operating status, 3-2, 10-1 Operating system, 3-4, 12-35 Installing, 12-35 Windows 2000 Professional, 12-30, 12 -37 Windows XP Professional, 12-30, 12-37 Output voltage, 15-9, 15-10 P Package contents, 4-2 Checking, 4-2 Packaging, 4-2 Checking, 4-2 Removing, [...]

  • Page 286

    Index SIMATIC Panel PC 877 Index-6 Operating instructions, Release 07/2006, A5E00877780-01 BIOS setup, 17-42 Security menu BIOS setup, 17-59 Selecting the language Windows XP, 9-16 Self test, 13-3 Self-test, 8-2, 9-2 Separating, 12-4, 12-6 Device, 12-4, 12-6 Serial interface, 17-2 BIOS setup, 17-54 Service pack, 8-11 Service Pack, 8-12 set, 8-5, 8-[...]

  • Page 287

    Index SIMATIC Panel PC 877 Operating instructions, Release 07/2006, A5E00877780-01 Index-7 Interface assignments, 17-9 Interfaces, 17-2 Technical data, 15-3 USB interface, 3-2, 10-3, 10-16 USB mouse, 10-16 USB peripheral, 8-13 User password, 17-60 V Versions Menu BIOS Setup, 17-64 VGA, 3-3 Virus protection, 9-10 visualizing, 12-11 Memory exp ansion[...]

  • Page 288

    Siemens A G Aut omation and Drives Industrial Aut omation Systems Postfach 4848 90437 NUERNBERG Federal Republic of German y www .siemens.com/automation ,'$([...]