Sharp XG-PH70X-N manual

MODEL XG-PH70X (Standar d zoom lens attached) XG-PH70X-N (No lens attached) MUL TIMEDIA PR OJECT OR OPERA TION MANU AL Introduction Quic k Start Setup Connections Basic Operation Useful Features Appendix[...]

ii IMPOR T ANT • • • • • For your assistance in reporting the loss or theft of your Projector , please record the Model and Serial Numbers located on the bottom of the pr ojector and retain this information. • • • • • Before r ecycling the packaging, please ensure that you have checked the contents of the carton thoroughly again[...]

Introduction -1 Before using the pr ojector , please read this operation man ual carefully . There ar e two important reasons for prompt warranty r egistration of your new SHARP Pr ojector , using the REGISTRA TION CARD packed with the pr ojector . 1. W ARRANTY This is to assure that you immediately r eceive the full benefit of the parts, service a[...]

-2 W ARNING: The cooling fan in this projector continues to r un for about 90 seconds after the projector enters the standby mode. During normal operation, when putting the projector into standby mode always use the ST ANDBY button on the projector or on the r emote control. DURING NORMAL OPERA TION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING TH[...]

Introduction -3 56 Menu items The menu can be operated to achieve tw o functions, adjustments and settings. (For setting the menu items, see pages 58 and 59 . ) Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright” • This operation can also be performed by using the b uttons on the projector. ENTER button MENU but[...]

-4 Contents Preparing Intr oduction How to Read This Operation Manual ............ 3 Contents .......................................................... 4 How to Access the PDF Operation Man uals ..... 7 IMPORT ANT SAFEGU ARDS .......................... 8 Accessories .................................................. 11 Pa rt Names and Functions ..[...]

Introduction -5 Using Basic Operation Using the “Options (1)” Menu ..................... 74 Displaying Dual Pictures (Pict in Pict) ............... 74 Setting the Resize Mode ................................... 74 Shifting the Projected Image V er tically (Digital Shift) ................................................ 75 Setting On-screen Disp[...]

-6 Contents The optional lenses are introduced on page 12 . Please purchase the lens f or y our desired usage. Reference Appendix Maintenance ................................................. 93 Maintenance Indicators ............................... 94 Regarding the Lamp .................................... 96 Lamp .................................[...]

Introduction -7 PDF operation manuals in se veral languages are included in the CD-R OM, so that y ou can w ork with the pr ojector . T o utiliz e these manuals, you need to install Adobe ® Reader ® on your computer (Windows ® or Macintosh ® ). Please download Adobe ® Reader ® from the Inter net ( http://www .adobe .com). Accessing the PDF ma[...]

-8 1. Read Instructions All the safety and operating instructions should be read befor e the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future r eference. 3. Heed W arnings All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions All oper[...]

Introduction -9 Ensur e that you read the following safeguar ds when setting up your pr ojector . Caution concerning the lamp unit ■ P otential hazard of glass par ticles if lamp rup- tures. In case of lamp rupture, contact y our nearest Shar p A uthorized Projector Dealer or Ser vice Center f or replacement. See “Re- placing the Lamp” on pag[...]

-10 Using the projector in other countries ■ The power supply v oltage and the shape of the plug ma y vary depending on the region or countr y you are using the projector in. When using the projector ov erseas, mak e sure you use an appropriate pow er cord f or the countr y you are in. T emperature monitor function ■ If the projector star ts to[...]

Introduction -11 Accessories Tw o R-6 batteries (“AA” size , UM/SUM-3, HP-7 or similar) Po w er cord * F or U .S., Canada, etc. (6' (1.8 m)) 9NK3090204900 F or Europe , e xcept U .K. (6' (1.8 m)) 9NK3090152700 * Use the power cord that corresponds to the w all outlet in y our countr y . Projector manual and technical ref erence CD-ROM[...]

-12 Accessories ■ Lens Projection distance f or 100" screen size Fixed wide lens ( × 0.8) AN-PH10EX 5'4" (1.6 m) Wide-zoom lens ( × 1.5 – 1.8) AN-PH20EZ 10' – 12' (3.0 m – 3.7 m) Standard zoom lens ( × 1.8 – 2.2) AN-PH31EZ 12' – 14'8" (3.7 m – 4.5 m) (attached to XG-PH70X) T ele-zoom lens ( ?[...]

Introduction -13 37 37 45 70 40 40 73 39 41 56 39 56 56 56 46 17 45 14 14 · 94 14 · 94 14 · 94 97 93 ENTER button For setting items selected or adjusted on the menu. KEYSTONE button For entering the Keystone Correction mode. Carrying handle For carrying the projector. STANDBY button For putting the projector into standby mode. ON button For turn[...]

-14 About the Indicators on the Projector Power indicator Red on ... Normal (Standby) Green on ... Normal (Power on) Red blinks ... The intake vent cover is open. (See page 93 .) Temperature warning indicator Off ... Normal Red blinks/on ... The internal temperature is abnormally high. (See pages 94 and 95 .) Lamp indicators 1, 2 Green on ... Norma[...]

Introduction -15 Projector (Side View) Using the Kensington Loc k • This projector has a K ensington Security Standard connector for use with a K ensington MicroSaver Security System. Refer to the inf ormation that came with the system for instructions on how to use it to secure the projector . Numbers in refer to the main pa ges in this operatio[...]

-16 Note • All the buttons on the remote control, e xcept the mouse/adjustment b utton and the ADJ ./MOUSE switch, are made of luminous material that is visible in the dark. Visibility will diminish o ver time . Exposure to light will recharge the luminous buttons . Remote Control 40 18 37 56 39 40 45 70 18 48 37 47 19 41 46 50 46 46 50 47 ST AND[...]

Introduction -17 Using the Remote Contr ol Inserting the Batteries 1 Press the tab and lift open the battery cover in the direction of the arr o w . 2 Insert the batteries. • Inser t the batteries making sure the po- larities correctly match the and marks inside the batter y compar tment. 3 Insert the tabs on the end of the battery cover into the[...]

-18 Using the Remote Contr ol Using the Remote Control with a Signal Cable When the signals from the remote contr ol cannot be reached due to the positioning of the pr ojector , use a ø3.5 mm minijack cable to connect the remote contr ol to the pr ojector . Now y ou can contr ol the projector with the remote control. Note • The wireless remote f[...]

Introduction -19 Using the Remote Control as a Wireless Computer Mouse When connecting the supplied remote mouse receiver to the computer , you can use the remote contr ol as the wireless computer mouse. 1 Connect the supplied remote mouse receiver to the USB termi- nal on the computer . 2 Slide the ADJ./MOUSE s witch on the remote con- trol to the[...]

-20 Quic k Star t Pag e 2 2 1. Place the projector facing a scr een Pag es 27–29, 37 Pag e 3 7 Press on the projector or on the remote control. This section shows the basic operation (pr ojector connecting with the computer). For details, see the page described below f or each step. Setup and Projection In this section, connection of the projecto[...]

Quick Start -21 Pag es 38, 39 4. Adjust the angle 5. Adjust the focus and the zoom Pag e 4 0 8. Tu rn the power of f Pag e 3 7 7. Select the input mode Pag e 4 5 1 1 1 1 1 Press on the projector or on the remote control to adjust the f ocus. 2 2 2 2 2 Press on the projector or on the remote control to adjust the zoom. Press on the projector or on t[...]

-22 Setting Up the Projector For optimal image quality , position the projector perpendicular to the screen with the pr ojector’ s feet flat and level. Doing so will eliminate the need for Keystone correction and pr o vide the best image quality . Note • The projector lens should be centered in the middle of the screen. If the horizontal line p[...]

Setup -23 Projecting a Reversed Image Pr ojection from behind the Screen ■ Place a translucent screen between the projector and the audience . ■ Rev erse the image by setting “Rear” in the “PRJ Mode” men u. (See page 84 .) Pr ojection Using a Mirror ■ Place a mirror (normal flat type) in front of the lens. ■ When the translucent scr[...]

-24 INPUT/OUTPUT Terminals and Connectable Main Equipment AUDIO input (2, 3) terminal Connecting an audio cable. (Shared audio input terminal for INPUT 2 and 3.) (See pages 28 and 29 .) AUDIO input (1) terminal Connecting an audio cable. (Audio input terminal dedicated to INPUT 1.) (See page 27 .) AUDIO input (4, 5) terminals Connecting an audio ca[...]

Connections -25 T erminal on the projector INPUT 1 INPUT 2 INPUT 3 A UDIO (f or INPUT 1) A UDIO (for INPUT 2, 3) INPUT 3 INPUT 2 INPUT 1 INPUT 2 Equipment Computer A udio-visual equipment T erminal on connected equipment RGB output terminal D VI digital video output terminal A udio output terminal HDMI output terminal D VI digital video output term[...]

-26 T erminal on the projector INPUT 4 INPUT 5 A UDIO (f or INPUT 1) A UDIO (for INPUT 2, 3) A UDIO (for INPUT 4, 5) OUTPUT A UDIO OUTPUT Equipment A udio-visual equipment Monitor Amplifier T erminal on connected equipment Video output terminal S-video output terminal A udio output terminal RGB input terminal A udio input terminal Cable Video cable[...]

Connections -27 Connecting to a Computer Before connecting, ensure the power cord of the pr ojector fr om the A C outlet is unplugged, and that the devices to be connected are turned off . After making all connections, turn on the projector and then the other de vices. When connecting a computer , ensure that it is the last device to be turned on a[...]

-28 Connecting with a 5 BNC to 15-pin D-sub Cable The projector emplo ys a 5 BNC computer input to pre vent deterioration of image quality . When connecting the input terminals on the pr ojector to the computer directly , Connect the R (P R ), G/G sync (Y), B (P B ), HD/C sync and VD cables of the 5 BNC to 15-pin D-sub cable (commer cially av ailab[...]

Connections -29 Connecting with a DVI Digital Cable The projector emplo ys the D VI digital input terminal for direct input of digital video signals from a computer . Note • When connecting the projector to a computer in this wa y , select “D . PC RGB” for “Signal T ype” in the “Picture” menu. • When using the ø3.5 mm mono audio ca[...]

-30 Connecting to Video Equipment Before connecting, ensure the power cord of the pr ojector fr om the A C outlet is unplugged, and that the devices to be connected are turned off . After making all connections, turn on the projector and then the other de vices. The projector has a D VD digital terminal, computer -RGB/ component terminal, S- video [...]

Connections -31 Connecting to Video Equipment That Has a DVI Output Terminal with a DVI Digital Cable Use a D VI Digital cable when connecting video equipment with the D VI output terminal such as D VD pla yers to the INPUT 3 terminal. Note • Select the input signal type of the video equipment. See page 63 . To INPUT 3 terminal DVI Digital cable [...]

-32 Connecting to RGB Video Equipment with a 5 RCA RGB Cable Use a 5 RCA RGB cable when connecting the RGB video equipment suc h as D VD play ers and DTV* decoders to the INPUT 2 terminals. * DTV is the umbrella term used to describe the new digital tele vision system in the United States. Note • When connecting the projector to the video equipme[...]

Connections -33 Connecting to Video Equipment That Has Component Output Terminals When connecting the video equipment that has component output terminals to the INPUT 1 terminal, use the 3 RCA to 15-pin D-sub cable (optional: AN-C3CP2). When connecting the video equipment that has component output terminals to the INPUT 2 terminals, use the BNC to [...]

-34 Connecting with a n S-video Cable or a Composite Video Cable Connect the video equipment to the INPUT 4 or 5 terminal using the S-video cab le or com- posite video cable (commer cially a vailab le). Note • The S-video signal input to the S-VIDEO terminal is separated into color and luminance signals for real- izing a higher-quality image. •[...]

Connections -35 Contr olling the Pr ojector b y a Computer When the RS-232C terminal on the pr ojector to the RS-232C serial terminal on the computer , or when the LAN terminal on the pr ojector to the LAN terminal on the computer , the com- puter can be used to contr ol the projector . Refer to the “SETUP MANU AL ” contained on the supplied CD[...]

-36 Connecting to a Monitor That Has an RGB Input T erminal Y ou can display computer images on a monitor using the RGB cables. Note • RGB signals and component signals input from the INPUT 1 or INPUT 2 terminals can be output to the monitor . • F or inputting video signals from the INPUT 1 terminal, another RGB cable (commercially a v ailable)[...]

Basic Operation -37 T urning the Pr ojector On/Off Info • If “Direct Power On” is set to “ON”, the pr ojector will be turned on automatically when you plug the power cord into the AC outlet. (See page 87 .) • English is the factory preset language. If you want to change the on-screen display to another language, change the language acco[...]

-38 Image Pr ojection Shifting the Lens In addition to the zoom function and adjustment of pr ojection angle using the adjust- ment feet, you can adjust the position of the pr ojection using the lens shift function. This is a useful function in cases such as when the screen cannot be mo ved. Adjustable range The adjustable range is shown belo w . H[...]

Basic Operation -39 Using the Adjustment Feet • When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment f eet to adjust the projected angle . • The height of the projector can be adjusted using the adjustment f eet when the screen is located higher than the projector , the screen is inclined [...]

-40 Note • After you ha v e pressed the FOCUS but- tons or the ZOOM buttons on the remote control or the projector , y ou can displa y the test pattern by pressing the ENTER but- ton. The test patter n is useful f or making more accurate adjustments . • F or fine adjustments , when pressing the H & V LENS SHIFT b uttons, the FOCUS b ut- ton[...]

Basic Operation -41 ENTER button KEYST ONE button UNDO button Adjustment button ( ' / " / / | ) Mouse/adjustment button ( ' / " / / | ) ENTER button UNDO button KEYST ONE button F or correcting an image desig- nating the corner of the pro- jected image F or correcting an image desig- nating the horizontal or vertical axes F [...]

-42 Geometric Adjustment Upper Left Upper Right Low er Right Lower Left GEOMETRIC ADJUSTMENT 1 Press on the pr ojector or on the remote control re- peatedly until “GEOMETRIC ADJUSTMENT” is displa yed. 2 Press the buttons belo w to ad- just the position, size or f ocus of the pr ojected image . • Match screen’ s four sides to green test patt[...]

Basic Operation -43 V ertical Keystone Correction (Adjustment with ' / " ) Horizontal Keystone Correction (Adjustment with / | ) ▼ On-screen Display H & V KEYSTONE 1 Press on the pr ojector or on the remote control re- peatedly until “H & V KEY- ST ONE” is displayed. • When the correction has already been made with “GE[...]

-44 Image Pr ojection IMAGE RESIZING (Adjustment with ' / " / / | ) 5 Press ' , " , or | to correct the image distortion. 6 Press or to set the po- sition.[...]

Basic Operation -45 Switching the Input Mode Select the appropriate input mode f or the con- nected equipment. Press , , , or on the remote contr ol to select the input mode. • • • • • When pressing on the projector , the input mode switc hes in order of : INPUT 1 INPUT 2 INPUT 3 • • • • • When pressing on the projector , the in[...]

-46 " On-screen Display V olume buttons × 1 × 4 × 9 × 16 × 36 × 64 × 2 × 3 " On-screen Display Adjusting the Volume Press / | | | | | on the projector or on the remote control to adjust the v olume . Note • Pressing or will lower the v olume. Pressing or | will raise the v olume. Turning Off the Sound Temporarily Pre[...]

Basic Operation -47 Freezing a Moving Image 1 Press on the remote control. • The projected image is frozen. 2 Press a gain to return to the moving ima ge from the currentl y connected equipment. Selecting the Picture Mode Y ou can select the suitable picture mode f or the projected ima ge, such as mo vie or video game. Press on the remote control[...]

-48 Resize Mode Press on the remote contr ol. • Pressing changes the displa y as shown. • To retur n to the standard image, press while “ RESIZE ” is display ed on the screen. • This function can also be accessed from the OSD menu (see page 74 ). This function allows y ou to modify or customize the resize mode to enhance the input image. [...]

Basic Operation -49 VIDEO Input signal Image type NORMAL FULL DTV/video 480 I , 480P , 576 I , 576P , NTSC, P AL, SECAM 720P , 1035 I , 1080 I 540P 4:3 aspect ratio 4:3 aspect ratio BORDER STRETCH SMART STRETCH Letter box Squeeze 16:9 aspect ratio Select “Stretch” Select “Stretch” Select “Full” Select “Full” 4:3 aspect ratio in 16:9[...]

-50 Displaying the Black Screen This function allows y ou to tempo- rarily displa y the blac k screen. 1 Press . 2 Pressing a gain will turn the projected ima ge back on. Displaying and Setting the Break Timer This function allows y ou to sho w the re- maining time for break during meeting. 1 Press . 2 While “ ” is displa yed, press ' , &q[...]

Useful Features -51 Menu Items The follo wing shows the items that can be set in the pr ojector . “Picture” menu INPUT 1 / INPUT 2 / INPUT 3 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +10 0 Signal Type Auto RGB Component INPUT 1/INPUT 2 D.PC RGB D.PC Comp. D.Video RGB D.Video Comp. INPUT 3 Tint Color Reset Bright +30 -30 Contrast Red Green Bright [...]

-52 Menu Items INPUT 4 / INPUT 5 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +10 0 Tint Color Reset Bright +30 -30 Contrast Red Green Bright Boost Progressive Picture 4500K 10500K Main Menu Sub Menu CLR Temp Page 60 Page 61 Page 60 Page 60 Page 61 Page 62 Page 60 Picture Mode Standard Presentation Cinema Custom 2D Progressive 3D Progressive Film Mode P[...]

Useful Features -53 “Fine Sync” menu *6 The “Fine Sync” menu is displa yed only while the input mode is INPUT 1, INPUT 2 or INPUT 3. *7 “Clock”, “Phase”, “H-P os”, “V -P os”, “Reset”, “Sa ve Setting”, “Select Setting” and “Special Modes” can be ad- justed only while the input mode is INPUT 1 or INPUT 2. Fine [...]

-54 Menu Items “Options (1)” menu INPUT 4 / INPUT 5 INPUT 1 / INPUT 2 / INPUT 3 Pict in Pict Options (1) Main Menu Sub Menu OSD Display Auto PAL (50/60Hz) SECAM NTSC4.43 NTSC3.58 PAL-M PAL-N Video System Background Image Capture Save Image Delete Logo Custom Blue None Normal Full Dot By Dot Border Stretch Smart Stretch Eco Mode [ON/OFF] Auto Se[...]

Useful Features -55 “Language” menu “Status” menu Main Menu Sub Menu English Deutsch Español Nederlands Français Italiano Svenska Português Language Page 92 Status Main menu Page 92 “Options (2)” menu LAN/RS232C Monitor Out RS-232C Options (2) Enable Disable INPUT 1 [ON/OFF] INPUT 2 [ON/OFF] INPUT 3 [ON/OFF] INPUT 4 [ON/OFF] INPUT 5 [...]

-56 Menu items The menu can be operated to ac hieve tw o functions, adjustments and settings. (For setting the menu items, see pages 58 and 59 . ) Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright” • This operation can also be perf ormed by using the b uttons on the projector . ENTER button MENU button UNDO button[...]

Useful Features -57 3 Press ' ' ' ' ' or " " " " " to select the item you want to adjust. • Pressing displays the items on the lower part of the “Picture” menu. To adjust the pro- jected image while viewing it Press . • The selected single adjustment item (e.g. “Bright”) appears instead [...]

-58 Menu items Menu Selections (Settings) Example: Setting “OSD Display” • This operation can also be performed by using the b uttons on the projector . 1 Press . • The “Picture” menu screen for the se- lected input mode is displayed. 2 Press or | | | | | to display the other menu items. • There are eight menu items as shown[...]

Useful Features -59 Sub menu 3 Press ' ' ' ' ' or " " " " " to select the item you want to set. Note • Press to return to the previous screen. • In some menu, select the icon using . 4 Press | | | | | to shift the cursor to the sub menu. 5 Press ' ' ' ' ' or " "[...]

-60 Y ou can adjust the projector’ s picture to your preferences using the “Picture” menu. Picture Adjustment (“Picture” menu) Selecting the Picture Mode This function allows you to select the picture mode in accordance with brightness of the room or content of the image to be projected. In all picture modes, items on the “Picture” me[...]

Useful Features -61 Adjusting the Color Temperature Menu operation Pag e 56 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Color T emperature Settings Note • “CLR T emp” cannot be set when “C .M.S. Ad- justment” on the “C.M.S.” menu is set to “sRGB”. (See page 64 .) Selectable items 4500K 10500K Descrip[...]

-62 Selecting the Progressive Mode Menu operation Pag e 58 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Progressive * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can con- vert this film source to progressive video at 60 frames/sec- ond with NTSC and P [...]

Useful Features -63 Signal Type Setting This function allows you to select the input sig- nal type RGB or component for INPUT 1, INPUT 2 or INPUT 3. Menu operation Pag e 58 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Signal T ype Settings INPUT 1/INPUT 2 Description Input signals are automatically recog- nized as RGB [...]

-64 Color Management System (“ C. M. S. ” menu) This function allows y ou to individuall y adjust the display c haracteristics of six colors (R: Red, Y : Y ellow , G: Green, C: Cyan, B: Blue, M: Magenta). Selecting the Color Repro- duction Mode This function allows you to select the color re- production mode for the projected images. Menu opera[...]

Useful Features -65 For more chromatic value of the target color For less chromatic value of the target color For more brightness of the target color For less brightness of the target color Setting the Brightness of the Target Color This function allows you to set the brightness of the selected target color . Menu operation Pag e 56 Example: “C.M[...]

-66 For stronger yellow of the target color For stronger red of the target color Setting the Hue of the Target Color This function allows you to set the hue of the selected target color . Menu operation Pag e 56 Example: “C.M.S.” screen menu Description of Hue Press Press | Resetting User-defined Color Settings This function allows you to res[...]

Useful Features -67 Overview of All Color Set- tings This function allows you to confirm the settings of all the colors. Menu operation Pag e 56 Example: “C.M.S.” screen menu[...]

-68 Y ou can adjust the computer image , match the computer displa y mode, and confirm the input signal using the “Fine Sync” menu. Computer Image Adjustment (“Fine Sync” menu) Adjusting the Computer Image Use the Fine Sync function in case of irregulari- ties such as vertical stripes or flickering in por - tions of the screen. Menu operati[...]

Useful Features -69 Special Mode Setting Ordinaril y , the type of input signal is detected and the correct resolution mode is automatically se- lected. Howe ver , for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to matc h the computer display mode. Menu operation Pag e 58 Exam[...]

-70 Auto Sync Adjustment Used to automatically adjust a computer ima ge . Menu operation Pag e 58 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of A uto Sync Adjustment Note • A uto Sync adjustment is also perf ormed by pressing on the projector or on the remote control. • The A uto Sync adjustment may tak e some time [...]

Useful Features -71 Auto Sync Display Function Used to set the display during A uto Sync. Menu operation Pag e 56 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of A uto Sync Display Description The image set as a background image is projected. See page 77 . The computer image being adjusted is displayed. Selectable items ?[...]

-72 Y ou can adjust the projector’ s audio to your preferences using the “Audio” menu. A udio Adjustment (“A udio” menu) Adjusting the Audio This function allows y ou to adjust the pr ojector’ s audio. Menu operation Pag e 56 Example: “Audio” screen menu Description of Adjustment Items Selectable items Press Press | Note • To re[...]

Useful Features -73 Speaker Setting This function allows you to turn the audio out- put of the internal speaker on or off when the projector is connected to an e xternal amplifier . Menu operation Pag e 56 Example: “Audio” screen menu Description of Speaker Settings Selectable items ON OFF Description The audio signal is output from the interna[...]

-74 Using the “Options (1)” Menu Y ou can use the “Options (1)” menu to enhance the usage for the pr ojector . Displaying Dual Pictures ( Pict in Pict ) The Pict in Pict (picture in picture) function allows you to display tw o pictures on the same screen. Y ou can display the image input from INPUT 4 or 5 as an inset picture over - lapping [...]

Useful Features -75 Shifting the Projected Im- age Vertically (Digital Shift) For easier viewing, this function shifts the im- age projected on the screen up or down elimi- nating either the upper or lower black band found in 16:9 and other wide aspect ratios. Menu operation Pag e 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Des[...]

-76 Using the “Options (1)” Menu Setting the Video System The video input system mode is factory preset to “A uto”; ho wever , a c lear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal. Menu operation Pag e 58 Example: “Options (1)”[...]

Useful Features -77 Selecting the Background Image Menu operation Pag e 58 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Bac kground Images Note • Y ou can set a captured image as a backg round image by selecting “Custom”. • When “Custom” is selected, an image saved us- ing “Image Capture” can be displ[...]

-78 Using the “Options (1)” Menu Eco Mode Menu operation Pag e 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Eco Mode * This is a ref erence value and is not guar anteed. Note • When “Eco Mode” is set to “ON”, the power con- sumption will decrease and the lamp life will extend. (Projection brightness [...]

Useful Features -79 Auto Power Off Function Menu operation Pag e 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of A uto P ower Off Note • When “Auto P ower Off ” is set to “ ON”, 5 min- utes before the projector enters the standby mode, the message “Enter ST ANDBY mode in X min.” will appear on the scree[...]

-80 Using the “Options (1)” Menu Note • If you input a wrong k eycode , the cursor returns to the first point of the “Old Code”. • The preset keycode is 4 " buttons on the projec- tor . If this keycode is set, the k e ycode input screen does not appear when turning the power on. 3 Press the 4 buttons on the remote control or on the[...]

Useful Features -81 When the system lock is set If you have set the system lock, enter the keycode and follow the procedure below to release the system lock. ▼ Input screen for keycode Note • When System Lock is set, the keycode input screen appears after the power is turned on. • If no keycode is entered, the image will not be displayed, eve[...]

-82 Helpful Functions Set during Installation (“ Options (2)” men u) Setting a Password • • • • • There is no factory preset for the pass wor d, so the “Options (2)” menu is enabled. • • • • • If you do not want other s to operate the “Op- tions (2)” menu, set a pass wor d. Menu operation Pag e 58 Example: “Options[...]

Useful Features -83 Checking the Lamp Life Status Y ou can confirm the cum ulative lamp usage time and the remaining lamp life (per centage). Menu operation Pag e 56 Example: “Options (2)” screen menu Description of Lamp Timer (Life) * This is a ref erence value and is not guar anteed. Note • It is recommended that the lamp be changed when th[...]

-84 Reversing/Inverting Pro- jected Images This projector is equipped with a re verse/in ver t image function that allows y ou to rever se or in- vert the projected image for v arious applications. Menu operation Pag e 58 Example: “Options (2)” screen men u Description of PRJ Modes Note • This function is used f or the rev ersed image and cei[...]

Useful Features -85 Master Slav e IP Address 192.168.150.2 192.168.150.3 Subnet Mask 255.255.255.0 255.255.255.0 DHCP Client OFF OFF Gatew ay 0.0.0.0 0.0.0.0 User Name (Reset) (Reset) P ass word (Reset) (Reset) Data P or t 10002 10002 Shortcut to Make Projector Stack Settings Normally , settings via web br owser are required f or the stack pr oject[...]

-86 Helpful Functions Set during Installation (“Options (2)” menu) Bypassing Unused Input Selections This function allows y ou to skip the input mode that y ou rarely use. Y ou can skip the input modes when pressing INPUT 1, 2, 3 b utton or INPUT 4, 5 b utton on the pr ojector . Menu operation Pag e 58 Example: “Options (2)” screen men u De[...]

Useful Features -87 Selecting the Transmis- sion Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Menu operation Pag e 58 Example: “Options (2)” screen menu Description of RS-232C Note • Ref er to the “SETUP MANU AL ” contained on the supplied CD-ROM f or RS-232C Specifica- tions and Command S[...]

-88 Helpful Functions Set during Installation (“Options (2)” menu) Monitor Output Settings When the Monitor Out has been set to “Enable”, the monitor output is activated and po wer is con- sumed even in the standb y mode. It is recom- mended that the Monitor Out be set to “Disable” when it is not connected. This reduces power consumptio[...]

Useful Features -89 DHCP Client Setting Connect the LAN cable bef ore turning the pro- jector on. If not, the DHCP Client function does not work. Menu operation Pag e 58 Example: “Options (2)” screen menu Description of DHCP Client Note • Select “ON” for “DHCP Client”. “Obtaining IP Address... ” appears , then the message “The n[...]

-90 Service Mode Only the service centers use the men u. Do not use the menu. Example: “Options (2)” screen menu Description F actory default setting: 192.168.150.002 Enter an IP address appropriate for the network. F actory default setting: 255.255.255.000 Set the subnet mask to the same as that of the computer and equipment on the network. F [...]

Useful Features -91 Returning to the Default Settings This function allows y ou to initialize the settings y ou ha ve made in the projector . Menu operation Pag e 56 Example: “Options (2)” screen menu Note About the network settings • “IP Address”, “Subnet Mask”, “Gate wa y” and other network setting items are initialized. The f o[...]

-92 Selecting the On-screen Display Language The projector can s witch the on-screen displa y language among 11 languages: English, German, Spanish, Dutch, French, Italian, Swedish, P or tu- guese, Chinese, Korean or Japanese. Menu operation Pag e 58 Example: “Language” screen menu Using the Other Menus (“Language” and “Status” men us) [...]

Appendix -93 Cleaning the air vents and the intake vent co ver ■ Use a vacuum cleaner to clean dust from the e x- haust vent, the intak e v ents and the intake v ent cov er (on the bottom of the projector). Info • If you w ant to clean the air v ents and the intake v ent cov er during projector operation, ensure yo u press on the projector or o[...]

-94 Po w er indicator Lamp indicators 1, 2 T emperature warning indicator Maintenance Indicators Maintenance Indicator s ■ The warning lights on the pr ojector indicate problems inside the pr ojector . ■ If a problem occur s, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the sta[...]

Appendix -95 Maintenance indicator Problem Cause P ossible solution T emperature war ning indicator Normal Abnor mal Off Red on (Standby) The internal temperature is abnormally high. Abnormal • Block ed air intake • Relocate the projector to an area with proper v entilation. (See page 9 .) • Cooling fan break- down • Internal circuit failur[...]

-96 Lamp ■ It is recommended that the lamp units (optional: AN-PH7LP1 and AN-PH7LP2) be replaced when the remaining lamp life becomes 5% or less, or when y ou notice a significant deterioration in the picture and color quality . The lamp life (percentage) can be chec ked with the on-screen display . See page 83 . ■ Purc hase a replacement lamp [...]

Appendix -97 Optional accessories Lamp unit 1 AN-PH7LP1 Removing and Installing the Lamp Unit Info • Ensure the lamp unit is remov ed using the handle. Ensure the glass surface of the lamp unit or the inside of the projector are not touched. • To av oid injury to yourself and damage to the lamp , make sure y ou carefully f ollow the steps below[...]

-98 Regar ding the Lamp 4 Remove the lamp unit. • Loosen the securing screws (two f or each lamp) from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow . At this time , keep the lamp unit horizontal and do not tilt it. 5 Insert the new lamp unit. • Press the lamp unit firmly into the lamp unit compar tme[...]

Appendix -99 To A C socket Po wer cord ON button ENTER button MENU button H&V LENS SHIFT button Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make sure to reset the lamp timer only when replacing the lamp . If you reset the lamp timer and continue to use the same lamp , this ma y cause the lamp to become damag[...]

-100 Computer Compatibility Chart • Multiple signal suppor t Horizontal F requency: 15–126 kHz Ve r tical F requency: 43–200 Hz Pix el Clock: 12–230 MHz Sync signal: Compatib le with TTL le vel Computer PC/ MAC/ WS Horizontal Frequency (kHz) Vertical Frequency (Hz) Horizontal Frequency (kHz) Vertical Frequency (Hz) VGA PC PC SVGA XGA VESA S[...]

Appendix -101 Note • Depending on the notebook computer , the image cannot be displa y ed or noise may appear in sim ulta- neous (CR T/LCD) mode. In this case, turn off the LCD display on the notebook computer . For more details, ref er to the operation man ual of the notebook computer . • When this projector receiv es 640 × 350 VESA f or mat [...]

-102 Tr oubleshooting Check • Projector pow er cord is not plugged into the wall outlet. • Po w er to the e xternal connected devices is off . • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector . • Remote control batteries hav e run out. • External output has not been set when connecting no[...]

Appendix -103 Check Problem P age The projector cannot be turned on or put into the standby mode using the ON or ST ANDBY button on the projector . All buttons on the projector and the remote control are unav ailab le. Picture is green on INPUT 1or 2 (COMPONENT). Picture is pink (no green) on INPUT 1, 2 or 3 (RGB). Picture is too bright and whitish[...]

-104 For SHARP Assistance If y ou encounter any pr oblems during setup or operation of this pr ojector , first refer to the “T r oubleshooting” section on pages 102 and 103 . If this operation manual does not ans wer y our question, please contact the SHARP Service depar tments listed below . U .S.A. Sharp Electronics Corporation 1-888-GO-SHARP[...]

Appendix -105 Specifications Multimedia Projector XG-PH70X (standard zoom lens attached)/XG-PH70X-N (no lens attached) NTSC3.58/NTSC4.43/P AL/P AL-M/P AL-N/P AL-60/SECAM/ DTV480 I /DTV480P/DTV540P/DTV576 I /DTV576P/DTV720P/DTV1035 I /DTV1080 I 0.7" DLP ® chip × 1 No . of dots: 786,432 dots (1,024 [H] × 768 [V]) 1.2 × electric zoom/focus le[...]

-106 Glossary Adv anced intelligent compression (P age 100) High quality resizing of low er and higher resolu- tion images to fit the projector’ s native resolution. Aspect ratio (P age 48) Width and height ratio of an image . The nor mal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 an[...]

Appendix -107 AC soc ke t ....................................................................... 37 ADJ ./MOUSE switch ...................................................... 18 Adjustment buttons ........................................................ 56 Adjustment f eet .............................................................. 39 Advanced i[...]

SHARP CORPORA TION[...]