Sharp XG-NV5XE manual

XG-NV5XE/H(E) 99/1/20/18:00 OPERA TION MANU AL MODEL XG - NV5XE LCD PR OJECT OR[...]

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE[...]

SPECIAL NO TE FOR USERS IN THE U .K. The mains lead of this product is fitted with a non-r ewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A appr oved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse c[...]

1 Important Information IMPOR T ANT For your assistance in reporting the loss or theft of your Colour LCD Projector , please recor d the Serial Number located on the bottom of the pr ojector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “[...]

2 Important Information Important Information Contents Important Safeguards …………………………… 3 Usage Guidelines ………………………………… 4 Outstanding Features …………………………… 5 How to Access the PDF Operation Man uals (for Windows and Macintosh) ……………… 6 Supplied Accessories ………?[...]

3 Important Information Impor tant Safeguar ds A TTENTION: Please read all of these instructions bef ore y ou operate y our LCD Pr ojector for the fir st time. Sa ve these instructions for future reference. For your own protection and pr olonged operation of your LCD Projector , be sure to read the following “Important Safeguards” car efully , [...]

4 Important Information Usage Guidelines Cautions Concerning the Setup of the Pr ojector For minimal servicing and to maintain high image quality , SHARP r ecommends that this projector be installed in an ar ea free from humidity , dust and cigar ette smoke. If the projector is used in these envir onments, the lens and filter will need to be cleane[...]

5 Important Information 1. WIRELESS PRESENT A TIONS WITH IrCOM The IrCOM function allows for wir eless transmission of digital images via infrared communication, fr om a PC, handheld PC or digital camera to the pr ojector . 2. AD V ANCED COMP A TIBILITY WITH HIGH-END WORKST A TIONS AND PCS Compatible with up to 100 Hz vertical refr esh rate, Sync o[...]

6 Important Information How to Access the PDF Operation Manuals (for Windows and Macintosh) PDF operation manuals in all languages are included in the CD-ROM. T o utilise these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acr obat Reader yet, you can download it from the Internet (ht[...]

7 Important Information Computer cable QCNW-5108CEZZ Macintosh adaptor QPLGJ1512CEZZ Mouse cont r ol cable for IBM PS/2 QCNW-5113CEZZ Car r ying bag GCASN0001CESA CD-ROM UDSKA0002CE01 Mouse cont r ol cable for Mac QCNW-5114CEZZ Lens cap GCOVH1307CESA “Power” r emote cont r ol RRMCG1471CESA Simple p r esentation remote cont r ol RRMCG1480CESA Fo[...]

8 Important Information Pr ojector Fr ont View 1 POWER indicator [pp. 18, 19, 36] 2 POWER buttons (ON/OFF) [pp. 18, 19, 36] 3 BLACK SCREEN button [p. 29] 4 INPUT SELECT button [pp. 19, 22, 25] 5 FREEZE button [p. 28] 6 KEYSTONE button [p. 14] 7 ADJUSTMENT buttons ( ∂ / ƒ / ß / © ) [pp. 14, 20, 21, 23–34] 8 LAMP REPLACEMENT indicator [pp. 18,[...]

9 Important Information T op View o p Fr ont View Simple Presentation Remote Contr ol Side View Fr ont View ON MUTE TOOLS R-CLICK ENTER INPUT MOUSE LIGHT LCD PROJECTOR ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN VOL OFF 1 2 3 4 5 6 7 8 e w q 0 9 r t y “P ower” Remote Control Side Vie w R/C OFF ON u i a s 1 MUTE button [[...]

10 Important Information 4 m 30˚ 30˚ 30˚ 120˚ P ar t Names Inserting the batteries 13 Press in and do wnward on the arr ow to remo ve the battery cover . 2 I nsert four AA size batteries f or the “P ower” remote contr ol and two AAA size batteries f or the simple presentation remote contr ol making sure their polarities match the ` and 1 ma[...]

11 Important Information Operating the Wireless Mouse from the “Power” Remote Control The “Power” r emote control has the following three func- tions: • Operation of projector controls • Operation of wireless mouse • Use of laser pointer Slide the MOUSE/ADJUSTMENT switch to the MOUSE or ADJ. position for use of the function. 1 Connect[...]

12 Setup & Connections Setting Up the Pr ojector and Screen P osition the projector perpendicular to the screen with all feet flat and level to ac hieve optimal image. Move the pr ojector forwar d or backwar d if the edg es of the image are distor ted. • The projector lens should be centred in the middle of the scr een. If the lens centre is [...]

13 Setup & Connections Setting Up the Projector and Screen Ceiling-mount Setup • Use the optional Sharp ceiling-mount bracket for this installation. • Before mounting the pr ojector , contact your near est Sharp Authorised LCD Projector Dealer or Service Centr e to obtain the recommended ceiling-mount bracket (sold separately). (AN-NV4T cei[...]

14 Setup & Connections Adjusting the Height of the Image 1 Press the foot r elease and lift the projector to the desired angle. 2 Remove your hand from the foot r elease. Once the adjustment foot has locked in position, release the projector . Returning the pr ojector to its original position While holding the projector , press the foot release[...]

15 Setup & Connections Connecting the Pr ojector Connecting the Projector to a Computer Y ou can connect your projector to a computer for pr ojection of full colour computer images. See the next page for details on the connections. CAUTION • Before connecting, be sure to turn both the projector and the computer of f. After making all connecti[...]

16 Setup & Connections Computer cable (supplied) Connecting the Projector 1 Connecting an IBM-PC 1. Plug one end of the supplied computer cable into the COMPUTER INPUT port on the projector . 2. Plug the other end into the Monitor output port on the computer . 3. Secure the plugs by tightening the thumb screws. 2 Connecting a Macintosh computer[...]

17 Setup & Connections Connecting the P r ojector “Plug and Pl a y ” Function This p r ojector is compatible with VESA-standa r d DD C 1/DDC 2B. The p r ojector and a VESA DDC compatible computer will communicate their setting r equi r ements, allowing for quick and easy setup. • The DDC, Plug and Play function of this p r ojector operate[...]

18 Operation 1 Basic Operations 1 Connect the P ower Cor d Plug the supplied power cor d into the AC socket on the back of the projector . 2 T urn on the Main P ower Pr ess the MAIN PO WER switch on the back of the projector . The POWER indicator lights up red and the projector enters standby mode. • If the bottom filter cover is not securely ins[...]

19 Operation Basic Operations 6 Selecting and Chec king the Input Mode Press INPUT SELECT on the projector or INPUT on the “Power” r emote control to select the desir ed input mode. Press it again to change the mode as shown on the left. • When no signal is being received, “No Signal” will be displayed. When a signal that the projector is[...]

20 Operation Using the GUI (Graphical User Interface) Men u Screen This pr ojector has a menu screen that allows you to adjust the image and various projector settings. The menu screen can be operated fr om the projector or the “Power” r emote control with the following buttons. (For use with the “Power” remote contr ol, slide the MOUSE/ADJ[...]

21 Operation Items on the COMPUTER1 or COMPUTER2 Mode Menu Bar Using the GUI (Graphical User Interface) Menu Screen Contrast Picture Auto Sync Fine Sync Audio ` 30 1 30 Clock ` 90 1 90 Treble Options Lamp Timer Language English PRJ Mode Status Ceiling ` Front Ceiling ` Rear Deutsch Español Nederlands Français Italiano Svenska Front Rear Auto Sync[...]

22 Operation • The IrCOM function can be used to wirelessly transfer still images from a computer , handheld P/C or digital camera to the projector via infrar ed communication. This function is used with the supplied Sharp Advanced Presentation Softwar e. See the operation manual of the software for installation and operating instructions. • Po[...]

23 Operation Selecting the On-screen Displa y Language ON MUTE TOOLS R-CLICK ENTER INPUT IrCOM FREEZE AUTO SYNC MENU LASER BLACK SCREEN VOL OFF 4 2 , 3 1 , 5 Projector (GUI) On-screen Display MOUSE ADJ. English is the preset language for the On-scr een Display . It can be changed to English, German, Spanish, Dutch, French, Italian, Swedish or Japan[...]

24 Operation ON MUTE TOOLS R-CLICK ENTER INPUT IrCOM FREEZE AUTO SYNC MENU LASER BLACK SCREEN VOL OFF 2 , 3 1 , 4 Picture Adjustments Y ou can adjust the projector’ s picture to your pr efer - ences with the following pictur e settings. Description of Adjustment Items For less contrast For less brightness For weaker red For weaker blue Selected i[...]

25 Operation Computer Image Adjustments When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur , adjust “Clock”, “Phase”, “H-Pos” and “V -Pos?[...]

26 Operation A uto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pr essing A UT O SYNC on the projector or the “Power” remote contr ol, or automatically by setting “Auto Sync” to “ON” in the pr ojector’ s GUI menu. When “Auto Sync” is set to “ON”: • The sy[...]

27 Operation Sa ving and Selecting Adjustment Settings This projector allows you to stor e up to seven adjustment settings for use with various computers. Once these settings ar e stored, they can be easily selected each time you connect the computer to the pr ojector . Sa ving the adjustment setting (For use with the “Power” remote contr ol, s[...]

28 Useful Features Digital Image Ma gnification and Reduction This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image or display it in its native resolution. (T o use the “Power” remote control to operate this function, slide the MOUSE/ADJUSTMENT switch to the A[...]

29 Useful Features Blac k Screen Function This function can be used to superimpose a black screen over the pr ojected image. Blacking out the Pr ojected Image Press BLACK SCREEN . “BLACK SCREEN” is dis- played on the screen. T o return to the original projected image, press BLA CK SCREEN again. • T o use the “Power” remote control to oper[...]

30 Useful Features Fit to Screen Function This function can be used to expand or comp r ess images which a r e not native 4:3 aspect ratio (i.e. 1,280 2 1,024 r esolution). (For use with the “Power” r emote cont r ol, slide the MOUSE/ADJUSTMENT switch to the ADJ. position.) 1 P r es s MENU . 2 P r es s ß / © to select “Options”. 3 P r ess[...]

31 Useful Features (GUI) On-screen Displa y Setting a Bac kground Ima g e This function allows you to select the image displayed when no signal is being sent to the projector . Description of Backgr ound Images (For use with the “Power” remote contr ol, slide the MOUSE/ADJUSTMENT switch to the ADJ. position.) 1 Press MENU . 2 Press ß / © to s[...]

32 Useful Features Rever se/In ver t Ima g e Function This projector is equipped with a r everse/inver t image function which allows you to r everse or inver t the pro- jected image for various applications. Description of Pr ojected Images (GUI) On-screen Display Selected item FRONT CEILING ` FRONT REAR CEILING ` REAR Projected image Normal image [...]

33 Useful Features This projector is equipped with pr esentation tools, which can be accessed from the “Power” r emote control. These will help you emphasise keypoints within your presentation. 1 Slide the MOUSE/ADJUSTMENT switch to the ADJ. position. 2 Press TOOLS to display the presentation tools menu window on the screen. 3 Press ∂ / ƒ / [...]

34 Useful Features A utomatic P o wer Shutoff Function When no input signal is detected for mor e than 15 minutes, the projector will automatically shut down. The on-scr een message on the left will appear five minutes before the power is automatically turned of f. • When “None” is selected in the “Background” setting, the Automatic Power[...]

35 Maintenance & T roubleshooting Air Filter Maintenance • This projector is equipped with thr ee air filters to ensure the optimal operating condition of the pr ojector . • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the pr ojector is used in a dusty or smoky location. • Have your nearest S[...]

36 Maintenance & T roubleshooting Problem • Blocked air intake. • Clogged air filter . • Cooling fan breakdown. • Internal circuit failure. • Bur nt-out lamp. • Lamp circuit failur e. • Lamp has been used for over 1,900 hours. • The bottom filter cover is open. Lamp/Maintenance Indicator s • The war ning lights on the projecto[...]

37 Maintenance & T roubleshooting Using the K ensington Loc k This projector has a Kensington Security Standar d connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secur e the projector . Check • Projector power cord is not plugged into the wa[...]

38 Appendix T ranspor ting the Projector When transporting the projector , carry it by the carr ying handle on the side. A soft-side carrying bag is also provided to transport the projector . Using the Carrying Handle Using the Carrying Bag CAUTION • Always put on the lens cap to prevent damage to the lens when transporting the projector . • Do[...]

39 Appendix Connection Pin Assignments Analog Computer 1 and 2 Signal Input P orts: 15-pin mini D-sub female connector Computer Input Analog 1. V ideo input (red) 2. V ideo input (green/sync on gr een) 3. V ideo input (blue) 4. Reserve input 1 5. Composite sync 6. Earth (red) 7. Earth (green/sync on gr een) 8. Earth (blue) 9. Not connected 10. GND [...]

40 Appendix Commands EXAMPLE • When “Bright” of COMPUTER 1 IMAGE ADJUSTMENT is set to 1 10. → ← RABR 1 0 _ 1 OK Projector Computer • If a dash (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. • COMPUTER INPUT ADJUSTMENT can only be [...]

41 Appendix The computer output signal timing of differ ent types of computer signals are shown below for r eference. For IBM and compatibles For Macintosh Series ab c d w x y z VIDEO SIGNAL HORIZONT AL SYNC SIGNAL VIDEO SIGNAL VERTICAL SYNC SIGNAL e a b c d w x y z VIDEO SIGNAL C-SYNC(H) C-SYNC(V) VIDEO SIGNAL V -SYNC e = 2 dot 640 640 720 640 640[...]

42 Appendix Specifications Product type Model Display method LCD panel Lens Projection lamp Brightness (ANSI lumen) Contrast ratio Audio output Computer RGB input signal Computer control signal Speaker system Rated voltage Input current Rated frequency Power consumption Operating temperature Storage temperature Cabinet I/R carrier frequency Laser p[...]

43 Appendix Dimensions Rear Vie w 261 61 142 237.5 33.5 310 128 16 11 27.5 337 61 121 93 77 24 243.5 229 25 11 10.5 62 43 70 77 84 84 22 19 7 259 Front Vie w Side Vie w T op View Units: mm Bottom Vie w[...]

44 Appendix Guide to Effective Presentations Electronic pr esentations are one of the most ef fective tools pr esenters can use to persuade an audience. There ar e several ways to enhance your presentation and maximise your ef fectiveness. The following are guidelines to help you create and deliver a dynamic presentation. a. T ypes of Presentations[...]

45 Appendix • Background colours can subconsciously af fect the audience: Red —increases viewers’ pulse and br eathing and encourages risk taking but can also be associated with financial loss. Blue —has a calming and conservative affect on the audience but can also cr eate boredom among corporate audiences that are often inundated with thi[...]

46 Appendix c. Set-Up When giving a presentation, you need to set the stage both figuratively and literally for success. The way you set up a presentation r oom will have a gr eat impact on the audience’ s perception of you and your message. By manipulating the placement and use of the following tools, you will impr ove the impact of your present[...]

47 Appendix d. Rehearsing & Delivery • The best time to rehearse is the day or evening befor e, not a couple of hours befor e, and the best place to rehearse is in the actual r oom. Rehearsing a speech in a small office is not the same as standing up in front of 100 people in a hotel ballr oom or classroom. • Due to varying processor speeds[...]

Appendix 48 Aspect ratio Width and height ratio of an image. The normal aspect ratio of a computer image is 4 : 3. There are also wide images with an aspect ratio of 16 : 9 and 21 : 9. ANSI lumen Brightness unit established by the American National Standards Institute. Auto sync Optimises projected computer images by automatically adjusting certain[...]

Appendix 49 A AA size batteries .............................................................. 10 AC socket ......................................................................... 18 ADJUSTMENT buttons ..................................................... 20 Air filter ............................................................................. [...]

XG-NV5XE/H(E) 99/1/20/18:00 SHARP CORPORA TION Osaka, J apan SHARP ELECTR ONICS (EUR OPE) GmbH Sonninstraße 3, 20097 Hamb urg, Ger man y SHARP ELECTR ONICS (U .K.) L TD . Manchester , U .K. Printed in Japan TINS-6584CEZZ T2085-A 9P02-JWG[...]