Go to page of
Similar user manuals
-
MP3 Player Accessories
Sennheiser HMEC 305-C
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser HMEC 400
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser HMEC 300
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser HMDC 322
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser HMEC 302
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser HMEC 306
36 pages 0.81 mb -
MP3 Player Accessories
Sennheiser NOISEGARD HMDC 322
36 pages 0.84 mb -
MP3 Player Accessories
Sennheiser HMEC 305
36 pages 0.81 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Sennheiser HMDC 322, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Sennheiser HMDC 322 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Sennheiser HMDC 322. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Sennheiser HMDC 322 should contain:
- informations concerning technical data of Sennheiser HMDC 322
- name of the manufacturer and a year of construction of the Sennheiser HMDC 322 item
- rules of operation, control and maintenance of the Sennheiser HMDC 322 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Sennheiser HMDC 322 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Sennheiser HMDC 322, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Sennheiser service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Sennheiser HMDC 322.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Sennheiser HMDC 322 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Headset HMEC 300 HMEC 302 HMEC 305 HMEC 305-C HMEC 306 HMEC 322 HMEC 400 HMDC 322 111 ™ Instructions for use[...]
-
Page 2
112 Contents Safety tips .................................................................................................... 113 Headset featur es .............................................................................................. 114 Product variants ......................................................................................[...]
-
Page 3
113 The HMEC 300, HMEC 302, HMEC 305,HMEC 305-C, HMEC 306, HMEC 322, HMEC 400 and HMDC 322 are pilot headsets with closed ear protector headphones and NoiseGard™ active noise compensation for use in helicopters, propeller and turboprop aircraft. Safety tips • With the NoiseGard™ active noise compensation turned on, typical aircraft sounds (fo[...]
-
Page 4
114 Headset featur es HMEC 300 NoiseGard™ headset • New active headset with effective attenuation of external noise across the entire frequency spectrum due to NoiseGard™ active noise compensation • NoiseGard™ active noise compensation provides clear communications even in the noisiest environment • Excellent comfort due to very low wei[...]
-
Page 5
115 • Power supply for NoiseGard™ is provided via on-board power supply system, cigarette lighter socket or battery pack • Fail safe operation in case of power failure • Supply voltage for the NoiseGard™ system is processed by the in-line electronics in the connecting cable • Made in Germany, two-year warranty Product variants HMEC 302 [...]
-
Page 6
116 HMEC 305-C NoiseGard™ headset The HMEC 305-C differs from the HMEC 300 in the following features: • No Mono/Stereo switch • Connection of headphones and microphone via XLR-5 plug HMEC 306 NoiseGard™ headset The HMEC 306 differs from the HMEC 300 in the following features: • Connection of headphones, microphone and NoiseGard™ electro[...]
-
Page 7
117 HMEC 400 NoiseGard™ headset The HMEC 400 differs from the HMEC 300 in the following features: • Stylish silver design • Leatherette ear cushions • Headband padding can be buttoned HMDC 322 NoiseGard™ headset The HMDC 322 differs from the HMEC 300 in the following features: • No Mono/Stereo switch • Coiled cable • M-87/AIC dynami[...]
-
Page 8
118 Delivery includes HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets • Headset • 3-pin XLR socket for aircraft panel mounting (power supply via the on-board system) • Padded carry and storage bag with shoulder strap for headset and accessories • Wind screen for microphone (except HMDC 322) • MZQ 2002-1 Cable clip (Cat. No.[...]
-
Page 9
119 ACX-1 ACX-2 ACX-11 ACX-22 Recommended accessories Replaceable gel ear cushions (Cat. No. 83140) BP-03 battery pack (except for HMEC 302, HMEC 305 and HMEC 306) Battery pack with XLR-3 socket for powering the NoiseGard™ electronics of the HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets. Four 1.5 V AA size alkaline manganese batt[...]
-
Page 10
120 Connecting the headsets Connecting cables for headsets HMEC 300 and HMEC 400 headsets: 1 1 / 4 ” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone 1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics HMEC 302 headset: 1/ 4 ” (6.35 mm) stereo jack plug for conne[...]
-
Page 11
121 Connecting cable for HMEC 322 and HMDC 322 HMEC 305-C headset: 1 XLR-5 plug for connecting the headphones and the microphone 1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics HMEC 306 headset: 1 6-pin Redel plug for connecting the headphones, the microphone and the power supply for the NoiseGard™ electronics HMEC 3[...]
-
Page 12
122 Powering options There are three options for powering the NoiseGard™ active noise compensation: 1. Connection to the on-board system (12–35 V DC) 2. Connection to the BP-03 battery pack (accessory, except for HMEC 302, HMEC 305 and HMEC 306) 3. Connection to the cigarette ligther socket (12–35 V DC) via adapter cable (accessory, except fo[...]
-
Page 13
123 1. Connecting the headset to the on-board system The NoiseGard™ electronics can be connected to on-board power supply systems with operating voltages between 12–35 V DC. The HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets are supplied with an XLR-3 socket for panel mounting in the aircraft. The XLR-3 socket must be mounted by[...]
-
Page 14
124 Headset HMEC 302: 씰 Connect the 1 / 4 ” (6.35 mm) stereo jack plug for the headphones and the PJ-068 jack plug for the microphone to the corresponding jack sockets of your intercom. HMEC 305 headset: 씰 Connect the XLR-5 plug to the aircraft’s XLR-5 socket. Headset HMEC 305-C: 씰 Connect the XLR-5 plug for the headphones and the microph[...]
-
Page 15
125 2 . Connecting the headset to the battery pack (except HMEC 302, HMEC 305 and HMEC 306) The NoiseGard™ electronics of the HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets can also be powered via the BP-03 battery pack ( ‘Recommended accessories’). The battery pack can be operated either on standard or rechargeable batter[...]
-
Page 16
126 Connecting the headset, turning on the battery pack 씰 Connect the XLR-3 plug of the headset connecting cable to the XLR-3 socket o n t h e connecting cable of the battery pack. 씰 HMEC 300 and HMEC 400 headsets: Connect the 1 / 4 ” (6.35 mm) stereo jack plug for the headphones and the PJ-068 jack plug for the microphone to the correspondin[...]
-
Page 17
127 ACX-1 ACX-2 ACX-11 ACX-22 3 . Connecting the headset via a cigarette lighter adapter cable (except HMEC 302, HMEC 305 and HMEC 306) Sennheiser offers special adapter cables with XLR-3 socket for connecting the NoiseGard™ electronics of the HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets to the on-board power supply via the ciga[...]
-
Page 18
128 Pr eparing the headsets for use Adjusting the headband For good noise attenuation and best possible comfort, the headband has to be adjusted to properly fit your head: 씰 Wear the headset so that the headband runs over the top of your head. 씰 Adjust the length of the headband so that • your ears are completely inside the ear cushions, • [...]
-
Page 19
129 Positioning the microphone Relocating the microphone boom The microphone boom can be worn on either side of the mouth. 씰 Loosen the quick-fixing device. 씰 Rotate the microphone boom by 180 ° . 씰 Tighten the quick-fixing device. Positioning the microphone towards the corner of the mouth The HMEC 300, HMEC 302, HMEC 305, HMEC 305-C, HMEC 3[...]
-
Page 20
130 For positioning the microphone of the HMDC 322 headset, proceed as follows: 씰 Adjust the length of the microphone boom so that the microphone is placed at the corner of the mouth. To do so, loosen the quick-fixing device and adjust the microphone boom in length. 씰 Pull the middle part of the microphone boom towards the mouth so that the dis[...]
-
Page 21
131 Additional information for helicopter use of the HMEC 322 headset The polarity of the microphone connection in helicopters is not standardized. If the microphone of your headset does not work with the existing polarity, you can reverse the polarity on the headset by simply rotating the microphone module. To do so, please proceed as follows: 1. [...]
-
Page 22
132 Using the headsets Turning NoiseGard™ on/off With the NoiseGard™ active noise compensation turned off, the headset can be used as a conventional headset. Turn on the NoiseGard™ active noise compensation by setting the ON/OFF switch to ON. When using the BP-03 battery pack, set the NoiseGard™ ON/OFF switch to ON and use the ON/OFF switch[...]
-
Page 23
133 Mic Gain Adjustment Adjusting the microphone gain According to JTSO approval C58a, the microphone output voltage has to be factory- preset to 400 mV. If this output voltage is too high or too low for your intercom system, it can easily be re-adjusted on the microphone. To do so, use a small slotted screwdriver and turn the ”Mic Gain Adjustmen[...]
-
Page 24
134 Spar e parts The following spare parts are available from your Sennheiser agent: • Wind screen for MKE 45-1 electret microphone • Ear cushions • Headband padding • Cable clip • Carry and storage bag with shoulder strap Replacing the wind screen If the wind screen for the electret microphone shows signs of wear such as tears or holes, [...]
-
Page 25
135 Replacing the headband padding Replace the headband padding if it is damaged. 씰 Pull the Ziploc type fastening strips of the headband padding apart and remove the worn headband padding. 씰 Put the new headband padding around the headband. 씰 Pull the two edges of the headband padding together so that the fastening strips slightly overlap. ?[...]
-
Page 26
136 In case of dif ficulty If problems occur that are not listed in the below table, please contact your Sennheiser agent. Problem Clear communication but no active noise compensation Possible cause and what to do The NoiseGard™ electronics are turned off. 씰 Check to see if the ON/OFF switch is set to ON. The XLR-3 plug has been pulled out of t[...]
-
Page 27
137 Problem Active noise compensation but very low volume communication Possible cause and what to do The volume control is set too low. 씰 Check the volume setting of the headset. The headphone connection has been pulled out (except HMEC 305, HMEC 305-C and HMEC 306). 씰 Check to see if the headphone jack plug is correctly connected. The microph[...]
-
Page 28
138 V aluable information on NoiseGard™ The NoiseGard™ principle One of the greatest stress factors today is noise. Research has shown that noise affects the nervous system, and can cause tiredness, poor concentration, irritability and tension. Of even greater concern is the permanent damage to hearing that can result from noise at high levels.[...]
-
Page 29
139 A In response to these problems, Sennheiser has developed an active noise compensation system – NoiseGard™ – which, combined with a high-quality passive hearing protector, provides consistent noise attenuation over the entire audio range. The overall noise level is reduced so that the radio volume can be turned down but enough noise still[...]
-
Page 30
140 The above diagram shows noise compensation with NoiseGard™: Passive hearing protectors effectively attenuate noise from the middle and upper frequency range, the effect decreasing sharply in the lower range. However, active noise compensation with NoiseGard™ combined with passive hearing protectors results in a reduction of noise of approx.[...]
-
Page 31
141 23 1 4 2 1 3 solder side 5 3 1 2 1 2 3 4 6 Connector assignment U174/U jack plug 1 Microphone Lo 2 Audio Hi 3 Microphone Hi 4 Audio Lo HMEC 300 1 Not assigned! 2 Microphone Hi 3 Microphone Lo 1 / 4 ” (6.35 mm) stereo jack plug 1 Audio Hi left 2 Audio Hi right 3 Audio Lo XLR-3 connector (NoiseGard™) 1 Power supply NoiseGard™ (DC+) 2 Ground[...]
-
Page 32
142 T echnical data HMEC 300 HMEC 302 HMEC 306 HMEC 400 Headphones Transducer principle dynamic Ear coupling circumaural, closed Frequency response 45–15,000 Hz Nominal impedance active/passive 300/150 Ω , mono 600/300 Ω , stereo Attenuation (active and passive) > 25 – 40 dB Max. sound pressure level 120 dB ( ± 5%) Contact pressure appr[...]
-
Page 33
143 HMEC 300 HMEC 302 HMEC 306 HMEC 400 General data Connecting cable 1.5 m, unilateral Weight without cable 370 g Power supply for NoiseGard™ 12–35 V DC Current consumption 27 mA (zero signal current), max. 80 mA Fuse 500 mA thermo fuse Connectors 6.35 mm stereo jack plug 6.35 mm stereo jack plug 6-pin Redel plug for 6.35 mm stereo jack plug f[...]
-
Page 34
144 T echnical data HMEC 305 앚 HMEC 305-C 앚 HMEC 322 앚 HMDC 322 Headphones Transducer principle dynamic Ear coupling circumaural, closed Frequency response 45–15,000 Hz Nominal impedance active/passive 300/150 Ω , mono 앚 50/35 Ω , mono Attenuation (active and passive) > 25 – 40 dB Max. sound pressure level 120 dB ( ± 5%) Contact[...]
-
Page 35
145 HMEC 305 앚 HMEC 305-C 앚 HMEC 322 앚 HMDC 322 General data Connecting cable 1.5 m, unilateral 앚 coiled cable, unilateral Weight without cable 370 g Power supply for NoiseGard™ 12–35 V DC Current consumption 27 mA (zero signal current), max. 80 mA Fuse 500 mA thermo fuse Connectors XLR-5 for headphones, 앚 XLR-5 for headphones 앚 U-1[...]
-
Page 36
146 Certificate of Conformity Sennheiser electronic GmbH & Co. KG declare that this device conforms to the applicable CE standards and regulations. For up-to-date information on Sennheiser products, you can also visit the Sennheiser Web site at “http://www.sennheiser.com”.[...]