Samsung SyncMaster 540B manual

Install drivers Install programs SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N / 940Be[...]

Notational Failure t o follow d irections noted by this sym bol could resu lt in bodily harm or dam age to equipme nt. Prohibited Important to read and u nderstand at all times Do not disassemble Disconne ct the plug from the outl et Do not touch Groundi ng to preven t an electric s hock Power When not used for an e xtended peri od of time, set you[...]

Do not use a damaged or loose plug. z This ma y cause a n electric shock or fi re. Do not pull the plug out by the wire n or touch the plug with wet hands. z This ma y cause a n electric shock or fi re. Use only a p roperly grounded plug and recepta cle. z An improp er ground may cause elect ric shock or equipment da mage. Insert the pow er plug fi[...]

Be sure to contact an authorized Service Center, when install ing your mo nitor in a locati on with the he avy dust, high or low tem peratures, h igh humidity, chemical substan ce and where it operates for 24 hours such as the airport, t he train station or etc. Failure t o do so may cause a seri ous damage to your monitor. Put your monito r in a l[...]

Set down the mon itor carefully. z The moni tor could b e damaged or brok en. Do not pl ace the monitor fa ce down. z The T FT-LCD surface may be dam aged. Installing a wall bracket must be done by a qualified profes sional. z Inst allation by unq ualified pe rsonnel ma y result in injury. z Always use the mount ing device specifie d in the owner&a[...]

Use the r ecommended deter gent with a sm ooth cloth. If the conne ctor between the plug and the pin is d usty or dirty, clean it properly with a dry cloth. z A dirty c onnector ma y cause an ele ctric shock or fire. Make sure to unp lug the power c ord before cleaning the prod uct. z Otherwis e, this may cause el ectric shock or fire. Unplug the p[...]

Keep the produc t away from places exposed to oil, smoke or moisture ; do not insta ll inside a veh icle. z This ma y cause malf unction, an electric shoc k or fire. z Especia lly avoid ope rating the mo nitor near water or outdoors whe re it could b e exposed to s now or rain. If the monito r is dropped or the ca sing is damage d, turn the monitor[...]

Do not in sert metal objects such as chop sticks, wire and gim let or inflammabl e objects such as paper and ma tch into the vent, headphone port or AV ports. z It may c ause a fire or an electri c shock. If an alien sub stances or water flows into the product , turn the prod uct off, unpl ug the power c onnector from the wall outle t and conta ct [...]

z A falling product cou ld cause p hysical dam age even de ath. When not us ing the product for an extended time p eriod, keep the product unplug ged. z Otherwis e, this may cause hea t emission fro m the accu mulated di rt or degraded insulation , leading to electric shock o r fire. Do not pl ace children’s favorite objects (or anything else tha[...]

Please make sure the followi ng ite ms are included with your mon itor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand T[...]

Monitor & Slidin g Stand Manual Quick Setup Gu ide Warranty Car d (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front[...]

MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature provi ding optimum viewing environment depending on the contents of the image you are watching. Currentl y six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie. Each[...]

AUTO button Use this button for auto adjustmen t. Power button [ ]/ Power indicator Use this button for turn the monitor on and off. / This light g lows blue during normal operatio n, and blinks blue once as the monitor saves your adjustments. See PowerSaver described in the manual for furth e r information rega rding power saving functions. For en[...]

Please make sure the followi ng ite ms are included with your mon itor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand T[...]

Monitor & Slidin g Stand Manual Quick Setup Gu ide Warranty Car d (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord Front[...]

MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature provi ding optimum viewing environment depending on the contents of the image you are watching. Currentl y six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie. Each[...]

See PowerSaver described in the manual for furth e r information rega rding power saving functions. For energy conservati on, turn your monit or OFF when it is not needed, or wh en leaving it unattended for long p erio ds. Rear Simple stand Pivot stand / Slid ing Stand (The configu ration at the back of the monitor may vary fro m product to product[...]

Please make sure the followi ng ite ms are included with your mon itor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Monitor & Pivot stand Manual Quick Setup Guide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune?[...]

Front MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature provi ding optimum viewing environment depending on the contents of the image you are watching. Currentl y six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie[...]

Enter button [ ] / Source button Activates a highlighted menu item. / Push the ' ', then selects the vi deo signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper le ft of the screen displaying the current mode -- a nalog or digital i nput signal.) Note : If you select the [...]

Please make sure the followi ng ite ms are included with your mon itor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Slidin g Stan[...]

Quick Setup Gu id e Warranty Card (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [[...]

the pre-configured value s may not be comfo r ta ble to your eyes depending on your taste. If this is the case, adjust th e brightness and contrast by usi ng the OSD menu. 2) Text For documentations or works involv in g heavy text. 3) Internet For working w ith a mixture of image s such as text an d graphics. 4) Game For watching motion pictures su[...]

Sim p le stand Slidin g Stand (The configu ration at the back of the monitor may vary fro m product to product.) POWER port Connect the power cord for your mon itor to the power port on the back of the monitor. DVI IN port Connect the DVI Ca ble to the DVI port on the back of your mon itor. RGB IN port Connect the signal cable to the 15-pin, D-sub [...]

Connecting the Monitor 1. Connect th e power co rd for your monit or to the power p ort on the bac k of the monit or. Plug the p ower cord for th e monitor into a nearby outle t. 2-1. Using the D-sub (Anal og) connect or on the vid eo card. Connect th e signal c able to the 1 5-pin, D-sub port on the ba ck of your mon itor. [ RGB IN ] 2-2. Co nnect[...]

Monitor Ass embl y Monitor and Bottom Swivel stand Pivot Stand / Slidin g Stand[...]

A . Stand Stopper Attachi ng a Base T his monito r accepts a 75 mm x 75 mm VESA-c ompliant mou nting interfa ce pad. Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interfa ce pad (Sold separately) 1. Turn off y our monitor and u nplug its p ower cord. 2. Lay the LC D monitor fac e-down on a f lat surface with a cushi on beneath i t t[...]

Connecting the Monitor 1. Connect the power cord for your monit or to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Using the DVI (Digital)[...]

Using the Stand Monitor Assembl y Monitor and Bo ttom Pivot Stand / Slidin g Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interface pad (Sold sep arately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mountin g interfa[...]

Connecting the Monitor 1. Connect the power cord for your monit or to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Connected to a Macintos[...]

Monitor Assembl y Monitor and Bo ttom Pivot Stand / Slidin g Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interface pad (Sold sep arately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mountin g interfa[...]

Connecting the Monitor 1. Connect the power cord for your mon itor to the power port on the back of the m onitor. Plug the power cord fo r the moni tor into a nearby outlet. 2-1. Using the D-sub (Analog) connecto r on the video card. Connect the 'DVI-A to D-SUB' Cable to the RGB IN port on the back of your monitor. [ RGB IN ] 2-2. Using t[...]

Using the Stand Pivot Stand A . Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interfac e pa d (Sol d sep ara te l y) 1. Turn off your monitor and un plug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion beneath it to protect the sc[...]

Installin g the Monitor Driver ( Automatic ) When prompte d by the operating sys tem fo r the monitor driver, insert the CD-ROM included with this moni tor. Driver installation is slight ly different from one ope rating system to ano ther. Follow the dire ctions appropriate fo r the operating syste m you have. Prepare a blank disk and downloa d the[...]

Then click "OK" button. 5. Monito r driver installatio n is complete d. This monitor driver is under certifying MS logo,and thi s installation don't damage your system.The certified dr iver will be posted on Samsung Monitor momepage http://www.samsung.com/ . Installing th e Monito r Driver (Manual) Windows XP | Windows 2000 | Window [...]

4. Click the " Properties " button on the " Moni tor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Hav[...]

8. If you can see followin g " Message " window, then click the " Continue Any way " button. Then click " OK " button. This monitor dr iver is under certifi ed MS logo,and this installation doesn' t damage your system.The certified driver will be po sted on Samsung Monitor homepage. http://www.samsung.com/ 9. Clic[...]

1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Displa y " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4. Choose " Monitor ". 5. Click " Driver " and then click on " Update Driver.. " then click on the "[...]

Natural Color Natural Colo r One of the recent problems in using a computer is that the color of the images printed out by a printer or oth er images scanned by a scanner or a di gital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by [...]

1. [ ]U se this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ] This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted autom[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen menu s to change the brightness according to persona l preferenc[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be cha nged and one of four modes can be selected - Cool, No rmal, Warm and Custom. ( Not available in MagicC olo r mode of Full and In tell igent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olo r mode of Ful[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Language You can choose one of eight lang uages. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position where the OSD menu appears on your monitor. [...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description[...]

Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]U se this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ] This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted autom[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen menu s to change the brightness according to persona l preferenc[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be cha nged and one of four modes can be selected - Cool, No rmal, Warm and Custom. ( Not available in MagicC olo r mode of Full and In tell igent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olo r mode of Ful[...]

V-Position display. (Available in ana log mode only) OSD H-Position You can change the horizontal position where the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the OSD menu appears on your mo nitor. Transparen cy Change the transparency of the backgro und of the OSD. Display Time The menu will be automa[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description[...]

Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]U se this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ] This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted autom[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Play/Stop Brightness You can use the on-screen menu s to change the brightness according to perso nal preference. Direct Acce ss Feature : When OSD i s not on the s creen, push the button to adj ust brightness. Contrast You can use the on-screen me nus to change the contrast according to personal pre ference. ( Not available in Mag[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning , repeat it after adjusting the frequency (clock speed). (Available in ana log mode only) Sharpness Change s the clearance of image. ( Not available in MagicColo r mode of Full and Intelligent. ) H-Position Changes the horizontal position of the monitor&apos[...]

H-Position You can change the horizontal position where the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the OSD menu appears on your mo nitor. Transparen cy Change the transparency of the backgro und of the OSD. Display Time The menu will be automatical ly turned off if no adjustments are made for a cert[...]

Menu Description Play/Stop Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]U se this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ] This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted autom[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Priority Information Picture Menu Description Play/Stop Brightness You can use the on-screen menu s to change the brightness according to persona l [...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be cha nged and one of four modes can be selected - Cool, No rmal, Warm and Custom. ( Not available in MagicC olo r mode of Full and In tell igent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olo r mode of Ful[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of eight langua ges. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position where the OSD menu appears on your monitor.[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Priority This is a source-switch function according to the priority that the user [...]

Menu Description Information Shows a video source, di spla y mode on the OSD screen.[...]

1. [ ]Use this button to open the on-screen menu and exit from the men u scree n or close screen adjustment menu. 2. [ ] This button allows you to adj ust it ems in the menu. 3. [ ]Press this button to act iva te a highl ig h ted menu ite m. 4. [ AUTO ]Press to self-a djust to the inco ming PC signal. Th e values of fine, coarse and positio n are a[...]

Menu Description AUTO When the ' AUTO ' butto n is pre ssed, the Au to Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coa r se an d position are adjusted automati cally. (Available in ana lo g mode only) To make th[...]

Menu Description Locked After pushing the "MENU" bu tto n more t han 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d co ntrast of the monitor with the OSD adjustment locki ng feature. MagicBright ™ Menu Description MagicBright™ Push th e Mag icBri gh t bu tto n to circle thro ug h ava il a bl e pr[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjus t brightness. Picture Brightness Contrast Color MagicColor Color Tone Co l or Co nt rol Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Play /Stop Brightness You can use the on-screen menu s to change the brightness according to persona l preference. Direct Acce ss Fea ture : When OSD is not on the screen, push the button to adjust brig htne ss. Contrast You can use the on-screen me nu s to change the contrast according to personal pre fe r en ce. ( Not available i[...]

Menu Description Pl ay/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively develope d to impro ve digital image a nd to display natural color more clearly without disturbing ima ge quality. 1) Off - Returns to th e original mode. 2) Demo - The screen b efore applying MagicC olor appears on the right and the screen a fter ap[...]

Menu Description Pl ay/Stop Coarse Removes noise such as ve rtical stripes. Coarse adjustment may move the screen image area . You may relocate it to the center usin g the horizontal control menu. (Available in ana log mode only) Fine Removes noise such as horizo ntal stripes. If the noise persists even after fine tuning , rep eat it after adjustin[...]

H-Position You can change the horizontal position where the OSD menu appears on your monit or. V-Position You can change the vertical positio n wh ere the OSD menu appears on you r monitor. Transparen cy Change the transparency of the background of th e OSD. Display Time The menu will be automatical ly turned off if no adjustments are made for a ce[...]

Menu Description Pl ay/Stop Image Reset Image parameters are replaced with the factory d efau lt values. Color Reset Color pa ra meters are replaced with the fa ctory default values. Information Menu Description Informatio n Shows a video source, display mode on the OSD screen.[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighti ng conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, t[...]

Overview | Installation | OSD Mode | Color Calibration | Unins tall | Troubleshooting Installation 1. Insert the installation CD into the C D-ROM drive. 2. Cl ic k th e Ma gi c T un e ™ installat i o n fi l e. 3. Select installation Language, Click "Next". 4. When the Installation Shield Wiza rd windo w appears, click "Next." [...]

6. Choose a fold er to install the MagicTune™ program. 7. Click "Install." 8. The "Installation Status" window appears.[...]

9. Click "Finish." 10. Wh en the in stallati on is compl ete, the M agicTun e ™ executable icon appears on your desktop. Double-click the icon to start the program. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting&[...]

OS z Windows™ 98 SE z Windows™ Me z Windows™ 2000 z Windows™ XP Home Edition z Windows™ XP Professional Hardware z 32MB Memory above z 25MB Hard disk space above * For more information, visit the MagicTune™ website . It is recommended using MagicTune™ in Windo ws™ 2000 or later .[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstal l | Troubleshooting OSD Mode The OSD mode makes the adjustment of se ttings on all monitors easy. When sele cted , e ach tab on top of the control window displays t he general de scriptio ns of the sub-menu items for adjustment. When selected, each tab displays a list of menus. For q[...]

Color Tab Definition Adjusts the "warmth" of the mo nitor background or image color. Resolution Lists all display resolutions supported by the program. MagicBright™ MagicBright™ is a new feature pr oviding the optimum viewing enviro nment depe nding on the contents of the ima g e you are watchin g . Currently four different modes are [...]

Image Tab Definition Adjusts the Fine , Coarse and Position values. MagicColor images by enhancing the brightness, sharpness, saturation, Hu e of a certain area on the screen . This offe rs an easy-t o-use inte rface that high lights the video-playing portion of your multimedia program by automatically de tecting and highlight the desired area by d[...]

Option Tab De finition You can configure MagicTune™ using the foll owing options. Support Tab Definition Shows the Asse t ID and the version nu mber of the pr ogram, and allows you to use the Help feature. Sharpness Changes the clearance of image. Preferences Loads the Preferen ces Dialo g Box. Preferences in use will ha ve an "V" in th[...]

Overview | Installation | OSD Mode | Color Calibration | Uni nstall | Troubleshooting Color Calibration 1. Color Calibration Color Calibration guides you to get opti mal color condition for your monitor. Proceed followin g 5step s for ge tting op timal mon itor col or condi tion . 1. Control "Brightness control bar" for matching the brigh[...]

2. Press "View Uncalibrated" button to see the original image.[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Uninstall The MagicTune™ program can be removed only by us ing the "Add or Remove Programs " option of the Windows™ Control Panel. Perform the following steps remove MagicTune™. 1. Go to [Ta sk Tray] ' [Start] ' [Settings] and select [Cont[...]

Overview | Installation | OSD M ode | Color Calibration | Uninstall | Tro ubleshoot ing Troubleshooting The current compu ting system is not compat ible with Magic Tun e™. Please press OK a nd cl ick on the "Shortcut to the MagicTune™ site" t o view our home page for further ref erence. An error may o ccur when your video/graphic card[...]

Visit the v ideo card maker' s homepage and downl oad and instal l the latest dri ver. For more i n f ormation abou t the video ca rd, contact the card manufac turer. To ensure nor m al op e rat ion, please re st ar t yo u r sy st em . An error occurs when the system is not restarte d after installing M agicTune™. (This is for W in98SE and W[...]

z Visit the Magi cTune™ website for technical support for MagicTun e™, F AQs (questions and answers) and software upgrades. z Visit the Magi cTune™ website and download the installation software for MagicTune™ MAC. the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/Magi cTu[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Overview What is MagicRotation? Traditionally, computer displays allowed th e user to view only in landscape mode. In today's information age, m ore users need to view documents, web pages, em ails, etc. in there day to day life. These types of applications can be better viewed [...]

Overview | Installation | Interface | Uninstall | Troubleshooting Installation 1. Ins ert the installation CD into the CD-ROM drive. 2. Click the MagicRotatio n installation file. 3. Select installation Language, Click "Next". 4. When the InstallShield Wizard window appears, click "Next." 5. Select "I accept the t erms of t[...]

6. Cho ose a folder to inst a ll the MagicRotation program . 7. Click "Install." 8. The "Setup Sta tus" window appears.[...]

9. Click "Finish." Have to reboot the system in order for the MagicRotation to work properly. 10. When the installation is complete, the Magi cRotation executable icon appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as video c ard, motherboard and the network environment[...]

movie files properly in 90, 180 and 270 orientations th en do the following : { Close the application. { Select the Orient ation (90, 180, 270) you want to view the application. { Relaunch the application. In most cases t his should fix the problem. 3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientati[...]

Overview | Installation | Interfa ce | Uninstall | Troubleshooting z When Rotation is functio ning, portion of MagicTun e™ program may not operate normally. z AutoRotation : The screens display wil l automatically rotate when the monitor is rotated. To execute Aut o Rotation, it shou ld be done as below. z Please install both MagicRotation an d M[...]

Rotate to 90 : Display will be rotated 90 degrees from the current angle. Rotate to 180 : Display will be rotated 180 degrees from the current angle.[...]

Rotate to 270 : Display will be rotated 270 degrees from the current angle. Hot key : Hot Keys are available by defa ult and can be changed by user. It can be assigned by user directly wi th keyboard after changing the existing HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. In case only general key i[...]

[...]

Overview | Installation | Interface | Unin stall | Troubleshooting Uninstall The MagicRotation program can be removed only by using the "Add/Remove Programs" option of the Windows Control Panel. Perform the following steps to remove MagicRot ation. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the men[...]

Overview | Installation | Interface | Uninstall | Troubleshootin g Troubleshooting Before You Call Technical Support z MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotati on capabilities. If the installed "Display Driver" is working incorrectly or has bug[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Mode","Recommend ed mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and the n disappears. Please change to the recommended mode during this one-mi nute period .[...]

resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ˧ Display ˧ Settings . Has the video card been set properly? Set the video card by [...]

Q & A Question Answ er How can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support ca n vary, depending on the version of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? W indows ME/XP/2000 : Set the resolution at the Cont[...]

Environment The location and the position of th e monitor may influenc e the quality and other features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to anothe r room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the mon[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

disappears. Please change to the recommended mode during this one-mi nute period . (The message is displayed ag ain if the system is rebooted.) There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerS aver mode. press a key on the keyboard to activate the monitor and restore the[...]

Control Panel -> Performance an d Maintenance -> Syste m -> Hardware -> Device Manager -> Monitors -> After dele ting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune™ is an a dditional software for the monitor . Some graphic cards may no t support your monitor. When you have a p[...]

Self-Test F eature Check Self-Test Feature Check | Warning Messages | Environment | Useful Tips Y our monitor provides a s elf test feature that allows you to chec k whether your monitor is functioni ng properly. Self-Test Feature Check 1. Turn off both your comp uter and the monitor. 2. Unplug the video cable f rom the back of the computer. 3. Tur[...]

1024 60 Hz" message comes up, di sconnect the cable from the computer while the monitor is still powered on. { If there is a message coming up on the screen or if th e screen goes white, this means the monitor is in working con dition. { In this case, check the computer for trouble.[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Hz, a "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and the n disappears. Please change to the recommended mode during th[...]

(The maximum frequency per resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ˧ Display ˧ Settings . Has the video card been set prope[...]

Q & A Question Answ er How can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, dep ending on the version of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? W indows ME/XP/2000 : Set the resolution at the Cont[...]

Environment The location and the position of the monitor may influe nce the quality and other features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to another ro om. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the moni[...]

General General Model Name SyncMaster 740B LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270. 336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch [...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

frequency of this repet it ion is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940B LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16 .6 inch (with Basic Stand) / 4.85 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16 .1 inch (with Basic Stand) / 5.55 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

frequency of this repet it ion is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 740N LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch [...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

frequency of this repet it ion is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Fn LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolu[...]

Less than 40 W Dimensions (WxDxH)/ Weight 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal considerations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, n on-condensing Storage Temperatur[...]

Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 48 0 35.000 66.667 30.240 -/- MAC, 832 x 62 4 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.00 -/- VESA,[...]

General General Model Name SyncMaster 540B LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 10[...]

Less than 25 W Dimensions (WxDxH)/ Weight ( Simple Stand) 337.5 x 180.0 x 336.8 mm / 13.3 x 7.1 x 13 .3 inch (with Basic Stand) / 2.75 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 337.5 x 180.0 x 333.8mm / 13.3 x 7.1 x 13 .1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Envi[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

General General Model Name SyncMaster 540N LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 10[...]

Less than 25 W Dimensions (WxDxH)/ Weight ( Simple Stand) 337.5 x 180.0 x 336.8 mm / 13.3 x 7.1 x 13 .3 inch (with Basic Stand) / 2.75 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 337.5 x 180.0 x 333.8mm / 13.3 x 7.1 x 13 .1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Envi[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

General General Model Name SyncMaster 740T LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 362.1 X 200.0 X 389.6 m m / 14.4 x 7.9 x 15.3 inch (with Basic Stand) / 4.6 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 362.1 X 200.0 X 389.6 m m / 14.4 x 7.9 x 15.3 inch (with Basic Stand) / 4.5 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

General General Model Name SyncMaster 940T LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16 .0 inch (with Basic Stand) / 5.35 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

General General Model Name SyncMaster 940N LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resoluti[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16 .6 inch (with Basic Stand) / 4.85 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16 .1 inch (with Basic Stand) / 5.55 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

frequency of this repetit ion is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Be LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolu[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16 .0 inch (with Basic Stand) / 5.35 kg Dimensions (WxDxH)/ Weight ( Sliding Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automati cally. However, if the signal diffe rs, the scre en may go blank while the power LED is on. Refe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display Mo[...]

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com Latin America ARGENTINE[...]

CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 2 5 08 65 65 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Mi n) http://www.samsung.de HUNGARY 06 40 985 985 http://www.samsung.com/hu ITALIA 199 153 153 http://www.s[...]

Terms Dot Pitch The image on a monitor is compose d of red, green and blue dots. The clo ser the dots, the higher the resolu tion. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several time s per second in order to create and display an image for the user.[...]

4. If you are not satis fied with the qual ity of picture, you can get better quality of picture by executing "auto adjustment fun ction" in display screen that is ap peared as window termination b utton is pressed. If there's still noise after auto matic adjustment, use FINE/COA RSE adjustment function. 5. If you view a fixed screen[...]

PRODUCT INFORMATION (Image Retention Free) LCD Mon itors and TVs may have im age retention when switc hing from one i mage to ano ther especi ally after d isplaying a s tationary image for a long ti me. This gui de is to de monstrate correc t usage of L CD products in order to protec t them from Ima ge rete nti on. Warrant y Warranty d oes not cov [...]

Ex) The best w ay to protect you r monitor from Image r etention is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image ret ention may not occur wh en a LCD panel i s operated u nder normal conditions. Normal condition s are define d as contin uously chang ing video p atterns. When the LCD panel is o[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate coll ection systems) This marking shown o n the product or its literature, indicates that it sho uld not be disposed w ith other househ old wastes at the end of its working life. T[...]