Samsung KFN8GH6Q4M manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Samsung KFN8GH6Q4M, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Samsung KFN8GH6Q4M one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Samsung KFN8GH6Q4M. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Samsung KFN8GH6Q4M should contain:
- informations concerning technical data of Samsung KFN8GH6Q4M
- name of the manufacturer and a year of construction of the Samsung KFN8GH6Q4M item
- rules of operation, control and maintenance of the Samsung KFN8GH6Q4M item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Samsung KFN8GH6Q4M alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Samsung KFN8GH6Q4M, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Samsung service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Samsung KFN8GH6Q4M.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Samsung KFN8GH6Q4M item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 1 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) . KFM4GH6Q4M KFN8GH6Q4M KFKAGH6Q4M 4Gb Flex-MuxOneNAND M-die * Samsung Electronics rese rves the right to cha nge product s or specification witho ut notice. INFORMA TION IN THIS DOCUMENT IS PROVID ED IN RELA TION TO SAMSUNG [...]

  • Page 2

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 2 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Revision History Document T itle Flex-MuxOneNAND Revision History Revision No. 0.0 0.1 History 1. Initial issue. 1. Corrected errata. 2. Chapter 1.3 Product Features revised. 3. Chapter 2.8.16 S tart Address8 Register F107 re[...]

  • Page 3

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 3 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Revision History Revision No. 0.2 1.0 1.1 History 1. Corrected errata. 2. Chapter 2.1 Detailed Product Description revised. 3. Chapter 2.2 Definitions revised. 4. Chapter 2.8.3 Device ID Register F001h(R ) revised. 5. Chapter[...]

  • Page 4

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 4 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 1.0 INTRODUCTION This specification contains information about the Samsung Electronics Co mpany Flex-MuxOneNAND  ‚ Flash memory product family . Sec- tion 1.0 includes a general overview , revision history , and product [...]

  • Page 5

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 5 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 1.2 General Overview Flex-MuxOneNAND  is a monolithic integrated circuit with a N AND Flash array using a NOR Flash interface. The chip integrates syst em features including:  A BootRAM(1KB) and bootloader ?[...]

  • Page 6

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 6 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 1.3 Product Features Device Architecture  Design T echnology:  Supply V oltage:  Host Interface:  5KB Internal BufferRAM:  NAND Array: Device Performance ?[...]

  • Page 7

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 7 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.0 DEVICE DESCRIPTION 2.1 Det ailed Product Description The Flex-MuxOneNAND is an advanced generation, high-performance MLC NAND-based Flash memory(Which can be programmed as both SLC and MLC). It integrates on-chip a conver[...]

  • Page 8

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 8 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.3 Pin Configuration 2.3.1 4Gb (KFM4GH6Q4M) / 8Gb (KFN8GH6Q4M) (TOP VIEW , Balls Fa cing Down) 63ball FBGA Flex-MuxOneNAND Chip 63ball, 10mm x 13mm x max 1.0mmt , 0.8mm ball pitch FBGA(4Gb) 63ball, 10mm x 13mm x max 1.2mmt ,[...]

  • Page 9

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 9 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.3.2 16Gb Product (KFKAGH6Q4M) (TBD) (TOP VIEW , Balls Fa cing Down) 63ball FBGA OneNAND Chip 63ball, 10mm x 13mm x max 1.4mmt , 0.8mm ball pitch FBGA NC NC NC NC NC NC NC CE2 INT2 NC NC NC NC NC NC NC NC INT1 NC NC NC NC NC[...]

  • Page 10

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 10 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.4 Pin Description NOTE : Do not leave power supply(Vcc-Cor e/Vcc-IO, VSS) disconnect ed. Pin Name Ty p e Nameand Description Host Interface ADQ15~ADQ0 I/O Multiplexed Address/Data bus - Inputs for addresses during read ope[...]

  • Page 11

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 11 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.5 Block Diagram 2.6 Memory Array Organization The Flex-MuxOneNAND architecture integrates several memory areas on a single chip. 2.6.1 Internal (NAND Array) Me mory Organization The on-chip internal memory is a convertible[...]

  • Page 12

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 12 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Internal Memory Array Information Internal Memory Array Organization Area Block Page Sector Main(SLC) 256KB 4KB 512B Main(MLC) 512KB S pare(SLC) 8KB 128B 16B S pare(MLC) 16KB 4KB Page0 512B 16B 128B P age0 4KB Page12 7 128B [...]

  • Page 13

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 13 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.6.2 External (BufferRAM) Me mory Organization The on-chip external memory is co mprised of 3 buffers used for Boot Code storage and data buffering. The BootRAM is a buffer that receives Boot Code from the in ternal memory [...]

  • Page 14

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 14 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.7 Memory Map The following tables are the memory maps for the Flex-MuxOneNAND. 2.7.1 Internal (NAND Array) Me mory Organization The following tables show the Internal Memory address map in word o rder . * Only four sectors[...]

  • Page 15

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 15 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block64 0040h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block96 0060h SLC: 0000h~00FCh, MLC: 0000h~0[...]

  • Page 16

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 16 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block128 0080h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block160 00A0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 17

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 17 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block192 00C0h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block224 00E0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 18

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 18 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block256 0100h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block288 0120h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 19

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 19 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block320 0140h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block352 0160h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 20

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 20 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block384 0180h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block416 01A0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 21

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 21 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block448 01C0h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block480 01E0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 22

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 22 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block512 0200h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block544 0220h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 23

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 23 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block576 0240h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block608 0260h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 24

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 24 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block640 0280h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block672 02A0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 25

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 25 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block704 02C0h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block736 02E0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 26

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 26 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block768 0300h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block800 0320h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 27

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 27 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block832 0340h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block864 0360h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 28

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 28 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block896 0380h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block928 03A0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 29

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 29 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Block Block Address [F100h] Page Address [F107h] Size Block Block Address [F100h] Page Address [F107h] Size Block960 03C0h SLC: 0000h~00FCh, MLC: 0000h~01FCh SLC: 256KB, MLC: 512KB Block992 03E0h SLC: 0000h~00FCh, MLC: 0000h[...]

  • Page 30

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 30 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.7.2 Internal Memor y Sp are Area Assignment The figure below shows the assignment of the spare area in the Internal Memory NAND Arr ay . Sp are Area Assignment in the Internal Memory NAND Array Information Wor d Byte Note [...]

  • Page 31

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 31 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.7.3 External Memory (Bu fferRAM) Address Map The following table shows th e External Me mory address map in Word and Byte Order. Note that the data output is unknown while host reads a regi ster bit of reserved area and du[...]

  • Page 32

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 32 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.7.4 External Memory Map Detail Information The tables below show Word Order Address Map informat ion for the BootRAM and DataRAM main and spare areas.  BootRAM(Main area) -0000h~01FFh: 2(sector) x 512byte(NAND main area[...]

  • Page 33

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 33 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.7.5 External M emory Sp are Area Assignm ent Buf. Wor d Address Byte Address F E D C B A 9 8 7 6 5 4 3 2 1 0 BootS 0 8000h 10000h BI(Bad block Information ) 8001h 10002h Managed by internal ECC logic 8002h 10004h 8003h 100[...]

  • Page 34

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 34 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Buf. Word Address Byte Address F E D C B A 9 8 7 6 5 4 3 2 1 0 DataS 0_2 8020h 10040h BI(Bad block Information ) 8021h 10042h Managed by internal ECC logic 8022h 10044h 8023h 10046h 4bit ECC parity values 8024h 10048h 8025h [...]

  • Page 35

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 35 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) NOTE : In case of ‘with ECC’ mode, Fle x-MuxOneNAN D automatically generat es ECC code for both main and spare data of memory during pr og ram operation, but does not update ECC code to spare bufferRAM during loa d opera[...]

  • Page 36

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 36 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8 Registers Section 2.8 of this specificat ion provides information about t he Flex-MuxOneNAND4G registers. 2.8.1 Register Address Ma p This map describes the register addresses, register name, register description, and ho[...]

  • Page 37

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 37 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.2 Manufacturer ID Register F000h (R) This Read register describes t he manufacturer's identification. Samsung Electronics Company manufacturer's ID is 00ECh. F000h, default = 00ECh 2.8.3 Device ID Register F001[...]

  • Page 38

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 38 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.4 V ersion ID Register F 002h This register is reserved for future use. 2.8.5 Dat a Buffer Size Regist er F003h (R) This Read register describes the size of the Data Buffer . F003h, default = 0800h 15 14 13 12 11 10 9876[...]

  • Page 39

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 39 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.6 Boot Buffer Size Regist er F004h (R) This Read register describes the size of the Boot Buffer . F004h, default = 0200h 2.8.7 Amount of Bu ffers Register F005h (R) This Read register describes the number of each Buffer [...]

  • Page 40

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 40 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.9 St art Address1 Register F100h (R/W) This Read/Write register describes the NAND Flash block address which will be l oaded, programmed, or erased. F100h, default = 0000h NOTE : For QDP, See Section 7.4 St art Address1 [...]

  • Page 41

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 41 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.16 S t art Address8 Regis ter F107h (R/W) This Read/Write register describes the NAND Flash start page addre ss in a block for a page load, program operation and the NAND Flash start sector address in a page for a load, [...]

  • Page 42

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 42 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Sector allocation according t o BSC(CASE1 : FSA=00) Sector allocation according t o BSC(CASE2 : FSA=01) Sector allocation according t o BSC(CASE3 : FSA=10) Sector allocation according t o BSC(CASE4 : FSA=1 1) * The first sec[...]

  • Page 43

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 43 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.18 Command Register F220 h (R/W) Command can be issued by two following methods, and user ma y select one way or the other to issue appropriate command; 1. Write command into Command Register when INT is at ready stat e.[...]

  • Page 44

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 44 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.18.1 T wo Methods to Clear Interrupt Register in Command Input T o clear Interrupt Register in command input, user may select one from either following me thods. First method is to turn INT to low by manually writing 000[...]

  • Page 45

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 45 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.19 System Configuration 1 Register F221 h (R, R/W) This Read/Write register descri bes the system configuration. F221h, default =40C0h Read Mode (RM) Read Mode Information[15] Burst Read Write Latency (BRWL) * Default va[...]

  • Page 46

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 46 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Burst Length (BL) Host must follow burst length set by BL when reading data in synchronous burst read. NOTE : 1) In case of BootRAM : M ain=512word , S pare=16word In case of Dat aRAM : Main=1Kword, S pare=32word Burst Lengt[...]

  • Page 47

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 47 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) I/O Buffer Enable (IOBE) IOBE is the I/O Buffer Enable for the INT and RDY signals. At st artup, INT and RDY outputs are High-Z. Bits 6 and 7 become vali d after IOBE is set to "1". IOBE can be reset by a Cold Rese[...]

  • Page 48

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 48 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Write Mode (WM) Write Mode Information[1] MRS(Mode Register Setting) Descript ion NOTE : 1) Operation not guara nteed for cases not defined in above table. Boot Buffer Write Protect Status(BWPS) Boot Buffer Write Protect Sta[...]

  • Page 49

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 49 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.20 System Configuration 2 Regist er F222h This register is reserved for future use. 2.8.21 Controller S t atus Register F240h (R) This Read register shows the overall internal st atus of the Flex-MuxOneNAND and the contr[...]

  • Page 50

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 50 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) OTP Lock Status (OTP L ) This bit shows whether the OTP block is locked or unlocked. Locking the OTP has the e ffect of a 'write-pro tect' to guard agains t accidental re-programming of data stored in the OTP block[...]

  • Page 51

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 51 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Controller Status Register Output Modes NOTE : 1) "1" for PI L Block Lock, "0" for PI L Block Unlock. 2) "1" for 1st B lock OTP Lock, "0" for 1st Block OTP Unlock. 3) "1" for[...]

  • Page 52

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 52 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Read Interrupt (RI) This is the Read interrupt bit. RI Interrupt [ 7] Write Interrupt (WI) This is the Write interrupt bit. WI Interrupt [6] Erase Interrupt (EI) This is the Erase interrupt bit. EI Interrupt [5] Stat u s Con[...]

  • Page 53

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 53 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Reset Interrupt (RSTI) This is the Reset interrupt bit. RSTI Interrupt [4] 2.8.23 S t art Block Addre ss Regist er F24Ch (R/W) This Read/Write register shows the NAND Flash block address in the Write Protection mode. Setting[...]

  • Page 54

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 54 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 2.8.26 ECC S t atus Register 1 FF00 h (R) This Read register shows the Error Correction Status. Th e Flex-MuxOneNAND can correct up to 4-bit errors. ECC can be performed on the NAND Flash main and spare memory areas. The ECC[...]

  • Page 55

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 55 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.0 DEVICE OPERA TION This section of the data sheet discusses the operation of the Flex-MuxOneN AND device . It is followed by AC/DC Characteristics and T iming Diagrams which may be consulted for further information. The F[...]

  • Page 56

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 56 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.1.1 Reset Flex-Mux OneNAND Command The Reset command is given by writing 00F0h to the boot partiti on address. Reset will return a ll default values into the device . 3.1.2 Load Dat a Into Buffer Command Load Data into Buf[...]

  • Page 57

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 57 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.2 Device Bus Operation The device bus operations are shown in the ta ble below. NOTE : 1) L=VIL (Low), H=VIH (High), X=Don’t Care. Operation CE OE WE ADQ0~15 RP CLK AV D S tandby H X X High-Z H X X W a r m R e s e t XXX [...]

  • Page 58

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 58 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.3 Reset Mode Operation The Flex-MuxOneNAND has 4 reset modes: Cold/Warm/Hot Reset, and NAND Flash Array Reset. Section 3.3 discusses the operation of these reset modes. The Register Reset T able shows the which registers a[...]

  • Page 59

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 59 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.3.1 Cold Reset Mode Op eration See Timing Diagram 6.15 At system power-up, the voltage detector in the device detects the rising edge of Vcc and releases an internal power-up reset s ignal. This trig- gers boot code loadin[...]

  • Page 60

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 60 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.4 Write Protection Op eration The Flex-MuxOneNAND can be write-protected to preven t re-programming or erasure of data. The areas of write-protection are the BootRAM, and the NAND Flash Array . 3.4.1 BootRAM W rite Protect[...]

  • Page 61

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 61 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.4.3.1 Unlocked NAND Array Wr ite Protection S t ate An Unlocked block can be programmed or erased. The status of an unlocked block can be changed to locked or locked-tig ht using t he appro- priate software command(Locked-[...]

  • Page 62

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 62 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.4.3.3 Locked-tigh t NAND Array Write Protection St ate A block that is in a locked-tight state can only be changed to lo cked state after a Cold or Warm Reset. Unlock and Lock command sequences will not affect its st ate. [...]

  • Page 63

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 63 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Data Protection Operation Flow Diagram * Samsung strong ly recommends to fo llow the ab ove flow ch art NOTE : 1) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapter 2.8.18.1 [...]

  • Page 64

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 64 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) All Block Unlock Flow Diagram *Samsung strongly recommen ds to follow the above flow chart NOTE : 1) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapter 2.8.18.1 2) All Block [...]

  • Page 65

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 65 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.5 Dat a Protection During Power Down Operation See Timing Diagrams 6.19 The device is designed to offer protection from any involuntary program/erase during power-transitions. RP pin which provides hardware protection is r[...]

  • Page 66

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 66 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.6.1 Superload Oper ation See Timing Diagrams 6.10 The Superload operation is used to read mu ltiple pages. During Superload operation, up to 4bit errors are corrected. Once the first data is loaded, an interrupt status ret[...]

  • Page 67

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 67 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.6.2 LSB Page Recov ery Read MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB p age has lower page address and MSB p age has higher page address in paired pages. If power off occurs during MSB page program,[...]

  • Page 68

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 68 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.7 Read Operation See Timing Diagrams 6.1,6.2, 6.3 and 6.4. The device has two read modes; Asynchr onous Read an d Synchronous Burst Read. The initial state machine automatically set s the device into the Asynchronous Read [...]

  • Page 69

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 69 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.7.2.1 Continuous Linear Burst Read Operation See Timing Diagram 6.2 First Clock Cycle The initial word is output at tIAA after the rising edge of the fi rst CLK cycle. The RDY output indicates the initial word is r eady to[...]

  • Page 70

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 70 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.7.2.3 Programmable Burst Read La tency Operation See Timing Diagrams 6.1 and 6.2 Upon power up, the number of initial cl ock cycles from V alid Address (A VD ) to initial data defaults to four clocks. The number of clock c[...]

  • Page 71

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 71 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.8 Synchronous Write(RM=1, WM =1) See Timing Diagram 6.6, 6.7 and 6.8 Burst mode operations enable high-spee d synchronous read and write operations. Burst oper ations consist of a multi-clock sequen ce that must be perform[...]

  • Page 72

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 72 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.9 Program Operation See Timing Diagrams 6.1 1 The Program operation is used to program data from the on-chip BufferRAMs into the NAND FLASH memory array . The device has two 2KB data buf fers, 1 Page (4KB + 128B) in size. [...]

  • Page 73

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 73 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Paired Page Address Information In case of MLC partition, when Program, Cache Program, Interleav e cache program, Copy-back with r andom data in operations are a bnor- mally aborted(eg. power-down), no t only page data under[...]

  • Page 74

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 74 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Pairing of pages in MLC block: 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 78 79 7A 7B 7C 7D 7E 7F . . . XX Represent s a Page number XX in an MLC block Represent s Pairing of p ages in an MLC block[...]

  • Page 75

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 75 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Program Operation Fl ow Diagram NOTE : 1) DBS must be set before data input. 2) Data input could be done anywhere between "S tart" and "Write Program Command". 3) FSA must be 00 within program operat ion.[...]

  • Page 76

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 76 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Program Interleave(@DDP) Flow C hart NOTE : 1) DBS must be set before data input. 2) FSA must be 00 and BSC must be 000 within pro gram operation 3) BSA must be 1000 and BSC must be 000. Start Write ‘DFS*, FBA ’ of Flash[...]

  • Page 77

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 77 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.9.1 Cache Program Operation See Timing Diagram 6.12 The Cache Program is to enhance the perfor mance of Program Operation. Employing Cache Program op eration, transfer time from Hos t to DataRAM can be shadowed, therefore [...]

  • Page 78

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 78 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Cache Program Operation Fl ow Diagram NOTE : 1) DBS must be set before dat a input. 2) FSA must be 00 and BSC must be 000 within pro gram operation. 3) BSA must be 1000. 4) Writing Syste m Configuration Register is optional [...]

  • Page 79

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 79 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.9.2 Interl eave Cach e Program Ope ration The Interleave Cache Program is available only on DDP . Host can write data on a chip while programming anothe r chip with this operation. Interleave Cache Program is executing as [...]

  • Page 80

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 80 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Interleave Cache Program Operation F low Diagram NOTE : 1) DBS must be set before dat a input. 2) FSA must be 00 and BSC must be 000 within pro gram operation. 3) BSA must be 1000. 4) Writing Syste m Configuration Register i[...]

  • Page 81

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 81 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.10 Copy-Back Program Operat ion with Random Data Input The Copy-Back Program Operation with Random Data Input in Flex -MuxOneNAND consists of 3 phases, Load data into DataRAM, Modify data and program into designated p age.[...]

  • Page 82

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 82 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.1 1 Erase Operation 3.1 1 .1 Block Erase Oper ation See Timing Diagram 6.14 The device can be erased one block at a time. T o erase a block is to write all 1's into the desired memory block by executing t he Internal [...]

  • Page 83

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 83 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Erase Interleave 1) (@DDP) Flow Chart NOTE : 1) Erase Suspend and Erase Resume Operations are not suppor ted in Erase Interleave(@DDP). Start Write ‘D FS*, FBA ’ of Flash Add: F100h D Q=DFS*, FBA Select DataRAM for DDP A[...]

  • Page 84

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 84 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.1 1.2 Erase Suspend / Erase Resume Operation The Erase Suspend/Erase Resume Commands in terrupt and restart a Bl ock Erase operation so tha t user may perform another urgent o pera- tion on the block that is not bei ng des[...]

  • Page 85

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 85 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12 Partition Information (P I) Block (SLC Only) One Block of the SLC NAND Flash Array memory is res erved for Partition In formation (PI) Block. The block can be read, programmed and erased using the same operatio ns as an[...]

  • Page 86

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 86 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.1 PI Block Boundary Information s etting It is 1st word of sector0 of page0 of main area of PI Blo ck. The Lock bits for PI Block and Boundary address of SLC and MLC are stored. After shipment, it is initially programme[...]

  • Page 87

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 87 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.1.1 PI Block Acces s mode entry The PI area is a separate part of the NAND Flash Array memory . It is accessed by issuing PI A ccess command(66h) instead of w rit ing a Flash Block Address(FBA) in the S tartAddress1 reg[...]

  • Page 88

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 88 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.1.2 PI Block Erase The PI Block Erase Operation erases the ent ire PI block including Partition Informati on. PI Block Access mode entry must be don e before issuing Erase operation for PI Block. Erasing the PI Area [...]

  • Page 89

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 89 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.1.3 PI Block Progra m Operation The PI Block Program Operation accesses the PI area and programs content from the DataRAM on-chip buffer to the designated page (s) of the PI. A memory location in the PI area can be prog[...]

  • Page 90

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 90 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.1.4 PI Up date Once new partition information is programmed into the PI block, an internal register that is invisible to users must be updated for the changes in PI to be applied. This internal register which stores par[...]

  • Page 91

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 91 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.12.2 PI Block Load Operation A PI Block Load Operation accesses the PI area and transfers identi fied content fr om the PI to the DataRAM on-chip buffer , thus making the PI contents available to the Host. The PI area is a[...]

  • Page 92

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 92 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13 OTP Operation (SLC only) One Block of the NAND Flash Array memory is reserv e d as a One-Time Programmable Block memory area. Also, 1st Block of NAND Flas h Array can be used as OTP . OTP area and 1st block OTP area mus[...]

  • Page 93

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 93 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) OTP Block Area Structure 1st Block OTP Area Structure One Block: 256KB+8KB 64pages Manufacturer Area : page 50 to page 63 14pages User Area : page 0 to page 49 50pages Sector(spare area):16B Sector(main area): 512B Page:4KB+[...]

  • Page 94

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 94 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13.1 OTP Block L oad Operation An OTP Block Load Operation accesses the OTP area and transfer s i dentified content from the OTP to the D ataRAM on-chip buffer , thus making the OTP contents available to the Host. The OTP [...]

  • Page 95

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 95 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13.2 OTP Block Pro gram Operation An OTP Block Program Operation accesses the OTP area and program s content from the DataRAM on-chip buffer to the designated pag e(s) of the OTP . A memory location in the OT P area can be[...]

  • Page 96

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 96 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) OTP Block Program Operatio n Flow Chart NOTE : 1) FBA(NAND Flash Block Address) could be omitted or any address. 2) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapter 2.8.18.[...]

  • Page 97

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 97 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13.3 OTP Block L ock Operation Even though the OTP area can only be programmed once witho ut erase capability , it can be locked when the device starts up to pr event any changes from being made. Unlike the main area of th[...]

  • Page 98

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 98 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) OTP Block Lock Operatio n Flow Chart NOTE : 1) FBA(NAND Flash Block Address) could be omitted or any address. 2) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapter 2.8.18.1 3[...]

  • Page 99

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 99 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13.4 1st Block OT P Lock Operation 1st Block can be used as OTP , for secured booting operation. 1st Block OTP can be ac cessed just as any other NAND Flash Array Blocks befor e it is locked, however , once 1st Block is lo[...]

  • Page 100

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 100 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 1st Block OTP Lock Operation Flow Chart NOTE : 1) FBA(NAND Flash Block Address) could be omitted or any address. 2) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapter 2.8.18[...]

  • Page 101

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 101 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.13.5 OTP and 1st Block OTP Loc k Operation OTP and 1st Block can be locked simultaneously , for lo cking bit lies in the same word of OTP area. 1st Block OTP can be ac cessed just as any other NAND Flash Array Blocks befo[...]

  • Page 102

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 102 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) OTP and 1st Block OTP Lock Operation Flo w Chart NOTE : 1) FBA(NAND Flash Block Address) could be omitted or any address. 2) ‘Write 0 to interr upt register’ step may be ignored when using INT auto mode. Ref er to chapt[...]

  • Page 103

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 103 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.14 DQ6 T oggle Bit The Flex-MuxOneNAND device has DQ6 T oggle bit. T oggle bit is another option to dete ct whether an internal load operation is in progress or completed. Once the BufferRAM(BootRAM, DataRAM0, DataRAM1) i[...]

  • Page 104

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 104 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.15 ECC Operation The Flex-MuxOneNAND device has on-chip ECC wi th the capability of correcting up to 4-bi t errors in the NAND Flash Array memory main and spare areas (512+16)B. As the device transfers data from a BufferR[...]

  • Page 105

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 105 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 3.16 Invalid Block Operation Invalid blocks are defined as blocks in t he device's NAND Flash Array memory that cont ain five or more inva lid bits which cause status failure during Program and Erase operation. The inf[...]

  • Page 106

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 106 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Invalid Block T abl e Creation Flow Chart 3.16.2 Invalid Block Replaceme nt Operation Within its life time, additional invalid blocks may develop with NAND Flash Array me mory . Refer to the device's qualification r ep[...]

  • Page 107

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 107 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) Referring to the diagram for further illustration, whe n an er ror happens in the nth page of block 'A' during program operation, co py the data in the 1st ~ (n-1)th page to the same location of block 'B&apos[...]

  • Page 108

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 108 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 4.0 DC CHARACTERISTICS 4.1 Absolute Maximum Ratings NOTE : 1) Minimum DC voltage is -0.5V on In put/ Output pins. During transit ions, this level should not fall to POR level(typ. 1.5V @1.8 V device). Maximum DC voltage may[...]

  • Page 109

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 109 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 4.3 DC Characteristics NOTE : 1) CE should be VIH for RDY . IOBE should be ‘0’ for INT . 2) I CC active for Host access 3) I CC active for Internal operation. (without host access) 4) Vccq is equivalent to Vcc-I O Param[...]

  • Page 110

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 110 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 5.0 AC CHARACTERISTICS 5.1 AC T est Conditio ns 5.2 Device Cap acit ance CAP ACIT ANCE (T A = 25  C, V CC = 1.8V , f = 1.0MHz) NOTE : 1) Capacit ance is periodically sampled and not 100% te sted. 5.3 V alid Block Ch arac[...]

  • Page 111

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 111 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 5.4 AC Characteristics fo r Synchronous Burst Read See Timing Diagrams 6.1 and 6.2 NOTE : 1) If OE is disabled at the same time or before CE is disabled, the output will go to high-z by t OEZ . If CE is disabled at the same[...]

  • Page 112

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 112 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 5.5 AC Characteristics for Asynchronous Read See Timing Diagrams 6.3 and 6.4. NOTE : 1) If OE is disabled at the same time or before CE is disabled, the output will go to high-z by tOEZ. If CE is disabled at the same time o[...]

  • Page 113

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 113 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 5.7 AC Characteristics for Asynchronous Write See Timing Diagrams 6.5 5.8 AC Characteristics for Burst Write Operation See Timing Diagrams 6.6, 6.7 and 6.8. NOTE : 1)T arget Clock frequency is 83Mhz Parameter Symbol Min Max[...]

  • Page 114

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 114 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 5.9 AC Characteristics for Loa d/Program/Erase Performance See Timing Diagrams 6.9, 6.10, 6.1 1, 6.12, 6.13 and 6.14 NOTE : 1) These parameters are tested based on INT bit of interrupt re gister . Because the time on INT pi[...]

  • Page 115

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 115 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.0 TIMING DIAGRAMS 6.1 8-Word Linear Burst R ead Mode with W rap Around See AC Characteristics T able 5.4 6.2 Continuous Linear Burst Re ad Mode with Wrap Around See AC Characteristics T able 5.4 t CES t AV D S t AV D H t [...]

  • Page 116

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 116 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.3 Asynchronous Read (V A T ransition Before A VD Low) See AC Characteristics T able 5.5 NOTE : V A=V alid Read Ad dress, RD=Read Data. See timing diagram 6.20, 6.21 for tASO 6.4 Asynchronous Read (V A T ransition Af ter A[...]

  • Page 117

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 117 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.5 Asynchronous Write See AC Characteristics T able 5.7 NOTE : V A=V alid Read Address, WD=Wri te Data. CE WE OE RP t CS t DS RDY t WPL t WPH t WC t CER Hi-Z Hi-Z CLK V IL t CH ADQ15-ADQ0 Valid WD VA Valid WD AVD t AAVDS t[...]

  • Page 118

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 118 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.6 8-Word Linear Burst W rite Mode See AC Characteristics T able 5.8 6.7 Burst Write Operation followed by Burst Read See AC Characteristics T able 5.8 t CES t AV D S t AV D H t ACS t ACH t RDYO t WDH t WDS t CLK Hi-Z CE C[...]

  • Page 119

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 119 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.8 St art Initial Burst Write Operation See AC Characteristics T able 5.8 t CES t AV D S t AV D H t ACS t ACH t RDYO t WDH t WDS t CLK Hi-Z CE CLK AV D OE RDY t RDYS t RDY A A/DQ0: A/DQ15 t CER D0 t CLKH t CLKL t CER WE t [...]

  • Page 120

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 120 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.9 Load Operation Timing See AC Characteristics T able 5.7 and T able 5.9 NOTE : 1) AA = Address of address register CA = Address of command register LCD = Load Command LMA = Address of memory to be loaded BA = Address of [...]

  • Page 121

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 121 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.10 Superload Operation Timing See AC Characteristics T able 5.7 and T able 5.9 Superload Operation T iming Diagram INT A/DQ0: A/DQ15 1st Address Host reads 1st data from Dat aRAM  Settin g 1st Setting  Host reads nt[...]

  • Page 122

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 122 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.1 1 Program Operation Timing See AC Characteristics T able 5.7 and T able 5.9 NOTE : 1) AA = Address of address register CA = Address of command register PCD = Program Command PMA = Address of memory to be programmed BA =[...]

  • Page 123

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 123 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.12 Cache Program Operation Timing See AC Characteristics T able 5.7 and T able 5.9 1st data input 2nd data input Address Setting cache program Command ADQ0~ A1, A2, A3 : Address of DataRAM to be written INT : Indicator fo[...]

  • Page 124

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 124 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.13 Interleave Cache Pr ogram Operation Timing See AC Characteristics T able 5.7 and T able 5.9 1st data input 2nd data input Address Setting cache program Command ADQ0~ A1, A2, An : Address of DataRAM to be written. INT :[...]

  • Page 125

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 125 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.14 Block Erase Operation Timing See AC Characteristics T able 5.7 and T able 5.9 NOTE : 1) AA = Address of address register CA = Address of command register ECD = Eras e Comma nd EMA = Address of memory to be erased SA = [...]

  • Page 126

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 126 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.15 Cold Reset Timing NOTE : 1) Bootcode copy operation st arts 400u s later than POR activation. The system power should reach Vcc afte r POR triggering level(typ. 1.5V) withi n 400us for valid boot code dat a. 2) 1KB Boo[...]

  • Page 127

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 127 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.16 W a rm Reset Timing See AC Characteristics T able 5.6 NOTE : 1) The status which can acce pt any register based oper ation(Load, Program, Er ase command, etc). 2) The status where reset is ongoing. 3) The status allows[...]

  • Page 128

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 128 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.17 Hot Reset Timing See AC Characteristics T able 5.6 NOTE : 1) Internal rese t operation means that the device initializes in ternal registers and makes output signals go to d efault status and b ufferRAM da ta are ke pt[...]

  • Page 129

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 129 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.18 NAND Flash Core Reset T iming See AC Characteristics T able 5.6 6.19 Dat a Protection Timing Duri ng Power Down The device is designed to offer protection from any in voluntary program/erase during power-transitions. R[...]

  • Page 130

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 130 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.20 T oggle Bit Timing in Asynchrono us Read (V A T ransition Before A VD Low) See AC Characteristics T able 5.5 NOTE : 1) V A=V alid Read Address, RD=Read Data. 2) Before IOBE is set to 1, RDY and I NT pin are High-Z stat[...]

  • Page 131

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 131 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 6.22 INT auto mode See AC Characteristics T able 5.10. NOTE : 1) INT pin polarity is based on ‘IOBE =1 and INT pol=1 (default)’ setting Write command into Command Register INT will automatically turn to Busy S tate INT [...]

  • Page 132

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 132 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.0 TECHNICAL AND APPLICA TION NOTES From time-to-time supplemental technical information and application notes pertaining to the design and operation of the device in a system are included in this section. Contact your Sam[...]

  • Page 133

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 133 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.1.1 The INT Pin to a Host General Purpose I/O INT can be tied to a Host GPIO to detect the rising edge of INT , signaling the end of a command operation. This can be configured to operate either synchronously or asynchron[...]

  • Page 134

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 134 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.1.2 Polling the Inte rrupt Register S t atus Bit An alternate method of determining the end of an operation is to c ont inuously monitor the Interrupt Status Register Bit instead of using the INT pin. When using interrupt[...]

  • Page 135

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 135 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.1.3 Determining Rp V a lue (DDP , QDP O nly) For general operation, INT operates as normal outpu t pin, so that tF is equivalent to tR (below 10ns). But since INT oper ates a s open drain with 50K ohm for Reset (Cold/Hot/[...]

  • Page 136

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 136 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) ~50k ohm INT Vcc or Vccq Rp INT pol = ‘Low’ Busy S t ate Ready VOH tf tr VOL Vss Vcc tr ,tf Ibusy [mA] Rp( oh m) Ibusy tf[ u s ] KFN8GH6Q4M @ Vcc = 1.8V , T a = 25  C , C L = 30pF 1K 10K 20K 30K 0 . 111 tr[ns] 0.959 [...]

  • Page 137

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 137 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.2 Boot Sequence One of the best features Flex-MuxOneNAND has is that it can be a booting device itself since it contains an internally built-in boot loader despite the fact that its core architecture is based on NAND Fl a[...]

  • Page 138

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 138 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) NOTE : 1) Step 2 and Step 3 can be copied into DRAM thro ugh two DataRAMs. Reservoir File System Os Image NBL3 NBL2 Partition 6 Block 162 Block 2 Block 1 Block 0 Partition 5 Sector0 BL2 Partition 4 Partition 3 Partition of [...]

  • Page 139

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 139 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.3 Partition of Flex-MuxOneNAND Flex-MuxOneNAND is the combo device whic h has SLC and MLC partition in one-chip. Generally , write intensive dat a require SLC-re lia bility but read and density oriented data such as music[...]

  • Page 140

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 140 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 7.4 DDP and QDP Description DDP(Dual Die Package): 8Gb DDP Flex-OneNAND contains two chips of 4Gb which are multiplexed such that they provide a single address range interf ace, w ith dou- ble the storage capacity. Since th[...]

  • Page 141

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 141 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 8.0 P ACKAGE DIMENSIONS (TBD) 0.10 MAX 0.45 ±0.05 0.32 ±0.0 5 0.9 ±0.10 BOTTOM VIEW TOP VIEW A C E B D F 0.80x9=7.20 A 0.80x1 1=8.80 63-   0.45 ±0.0 5 G 4.40 0 . 8 0 B 0.20 M A B  (Datum A) (Datum B) 2 543 1 6 [...]

  • Page 142

    Flex-MuxOneNAND4G(KFM4GH6Q4M-DEBx) - 142 - FLASH MEMORY Flex-MuxOneNAND8G(KFN8GH6Q4M-DEBx) Flex-MuxOneNAND16G(KFKAGH6Q4M-DEBx) 16G product (KFKAG H6Q4M) 0.10 MAX 0.45 ±0.05 0.32 ±0.0 5 1.3 ±0.10 BOTTOM VIEW TOP VIEW A C E B D F 0.80x9=7.20 A 0.80x1 1=8.80 63-   0.45 ±0.0 5 G 4.40 0 . 8 0 B 0.20 M A B  (Datum A) (Datum B) 2 543 1 6 3.60[...]