Quantum ATL M-Series manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Quantum ATL M-Series, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Quantum ATL M-Series one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Quantum ATL M-Series. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Quantum ATL M-Series should contain:
- informations concerning technical data of Quantum ATL M-Series
- name of the manufacturer and a year of construction of the Quantum ATL M-Series item
- rules of operation, control and maintenance of the Quantum ATL M-Series item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Quantum ATL M-Series alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Quantum ATL M-Series, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Quantum service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Quantum ATL M-Series.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Quantum ATL M-Series item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    AT L M - S e r i e s User ’ s Guide 642300 2-03 V e r . 3, Rel. 0[...]

  • Page 2

    6207947 -07c N 111 A TL M-Seri es Us er ’s Guide, 6 423002- 03, V er . 3, Rel. 0, Jan uary 2 003, Ma de in U SA. Quantum Corpo ratio n provid es th is publ icati on “as is” with out warr anty of any kind, e ither express or implied, including b ut not li mited to the implied w arranties of mer chantabilit y or fitn ess for a pa rticular purpo[...]

  • Page 3

    ATL M -Seri es U ser’s Guid e iii Content s Preface xiii Chapter 1 Overview 1 Library Capacity ............... ........................... ........................... ................ 1 ATL M1500 Library ..................... ........................... ................... ...... 1 ATL M2500 Library ..................... .........................[...]

  • Page 4

    Conten ts iv ATL M -Seri es U ser’s Guid e Using the Quick View Menu Screen ...................... ........................... . 19 Accessing the Quick Vi ew Menu Screen .......................... .......... 20 Viewing Library Information .................................... .................. . 20 Viewing Tape Drive Informati on ........... ....[...]

  • Page 5

    Content s ATL M-Series User’ s Guide v Changing the Baud Rate Setting ............... ........................... .............. 67 Setting the Time ................ ........................... ........................... .............. 67 Setting the Date ................................... ........................... ....................... 68 [...]

  • Page 6

    Conten ts vi ATL M-Series User’s Guide Appendix A Specificat ions 105 Physical Specificat ions .................................... ........................... ........ 106 Performance Specificati ons .......... ........................... .......................... 108 Reliability Speci fications ........................ ........................[...]

  • Page 7

    ATL M -Seri es U ser’s Guid e vii Figures Figure 1 ATL M1500 Front Panel . ........................... ......................... 5 Figure 2 ATL M2500 Front Panel . ........................... ......................... 6 Figure 3 ATL M1500 Internal Layout .............................. ................ 8 Figure 4 ATL M2500 Internal Layout ........[...]

  • Page 8

    Figures viii ATL M -Seri es U ser’s Guid e Figure 16 Sample Tape Drive Power Screen ........................ .......... 24 Figure 17 Sample Drive Power Screen ......................... ................... 25 Figure 18 Menu Screen ................................. ........................... .......... 26 Figure 19 Sample Move Cartridge FROM Scree[...]

  • Page 9

    Figures ATL M-Series User’ s Guide ix Figure 43 Sample Tape Drive Power Screen .................... .............. 81 Figure 44 Drive Power Screen ................................... ....................... 82 Figure 45 Adjust Contrast Screen..................... ........................... ..... 83 Figure 46 Service Menu Screen..................[...]

  • Page 10

    Figures x ATL M- Seri es Use r’s Gu ide[...]

  • Page 11

    ATL M-Series User’ s Guide xi T ables Table 1 Capacity, ATL M1500 Mul tiple Library Stack ................ 3 Table 2 Capacity, ATL M2500 Mul tiple Library Stack ................ 4 Table 3 Front Panel Features .................................. ......................... 7 Table 4 GUI Icons ................ ........................... .............[...]

  • Page 12

    Ta b l e s xii AT L M-Ser ies User’s Guid e[...]

  • Page 13

    ATL M-Series Us er’s Guide x iii Preface Audience This document is written for operators of the A TL M1500 and A TL M2500 librarie s. Purp ose This document explains how to use the A TL M1500 and A TL M2500 librarie s. Document Organization This document is organiz ed as follows: • Chapter 1, Overview , pr ovides an overview of the A TL M-Se ri[...]

  • Page 14

    Preface xiv ATL M -Seri es Use r’s Gu ide • Chapter 4, Performing Maintenance Operations , explains how to perform li brary maintenan ce operations using the GUI Maintena nce screen. • Chapter 5, Running Diagn ostic Progr ams , ex plai ns ho w to u se the libr ary ’s bu ilt in di ag nos tic p rogra ms. • Chapter 6, Runn ing t he De monstr[...]

  • Page 15

    Preface ATL M-Series User’ s Guide xv This manual uses the foll owing: • Right side of the li brary — Refers to the right side as you face the component bei ng described. • Left side of the library — Refers to the left sid e as you face the component being described. Related Documents Documents r elated to the A T L M-Series librari es ar[...]

  • Page 16

    Preface xvi ATL M -Seri es Use r’s Gu ide Refer to the appr opriate product manuals for information about your tape drive and cartridges. SCSI-2 Specificati on 0 The S CSI -2 c ommu nic at ion s spe cif icat ion is th e propo sed American National Standar d for informati on systems, dated Marc h 9, 1990. Copies may b e obtained fr om: Global Engi[...]

  • Page 17

    Preface ATL M-Series User’ s Guide xvii Web S it e 0 V i sit the Quantum web site at: http://www.quantum.com Customer Support 0 The Customer Support Department pr ovides a 24- hour help desk that can be reac hed at: North/South America: (949) 725 -2100 or (800) 284 -5101 Asia/Pacifi c Rim: (International Code) +61 7 3839 0988 Eur ope/Middle East/[...]

  • Page 18

    Preface xviii ATL M -Seri es Use r’s Guide[...]

  • Page 19

    ATL M-Series User’ s Guide 1 Chapter 1 1 Over view This chapter pr ovides an overvie w of the A TL M-Series libraries and their feat ures. Library Capacity 1 A TL M1500 Library 1 The A TL M1500 library c an contain up to two tape drive s and up to 21 DL T/SDL T cartridges or 25 L TO cartridg es. The cartridges ar e stored i n two independently r [...]

  • Page 20

    Chapte r 1 Overv iew SCSI Configu ration 2 ATL M -Ser ies U ser’s Guid e The cartridges a re stor ed in up to eight i ndependently r emovable cartridge magazines and up to f our fixed cartridge slots. SCSI Configuratio n 1 The A TL M1500 and A TL M2500 l ibrary modules com e configure d for L VD SCSI. One SCSI bus is prov ided for the library r o[...]

  • Page 21

    Cha pter 1 Ov erv iew Library Sc alabilit y ATL M-Series User’ s Guide 3 T able 1 Cap acity , A TL M1500 Mu ltiple Libr ary S tack # of A TL M1500 Library Modules Max. # of T ape Drives # of Cartridges * * The va lues in the # of Cartridges and Cap acity colum ns assum e that all the maga zines an d fixed cartridge slots are fully po pulated with[...]

  • Page 22

    Chapte r 1 Overv iew Librar y Scalabili ty 4 ATL M -Ser ies U ser’s Guid e T a ble 2 Capaci ty , A TL M2500 Mu ltiple Libr ary S tack # of A TL M2500 Librar y Module s Max. # of T ape Drives # of Cartridg es * * The va lues in the # of Cartridge s and Cap acity colum ns assum e that all the maga zines and fixed cartridge slots are fully po pulate[...]

  • Page 23

    Cha pter 1 Ov erv iew Libr ary Feat ur es ATL M-Series User’ s Guide 5 Library Features 1 Front Panel 1 Figur e 1 illustrates t he featur es of the A TL M1500 library f ront panel. Figur e 2 illustrates th e feature s of the A TL M2500 library front pane l. These featur es ar e described in table 3 . Figure 1 A TL M1500 Front Pane l Green LED GUI[...]

  • Page 24

    Chapte r 1 Overv iew Library Feat ures 6 ATL M -Ser ies U ser’s Guid e Figure 2 A TL M2500 Front Pane l GUI GUI T op left magazine access d oor (door 1) Magazine door button Bottom left magazine access door ( door 2) Magazine door button Operator control panel Viewing wi ndow Magazine door button Right magazine access door Red LED GUI buttons Gre[...]

  • Page 25

    Cha pter 1 Ov erv iew Libr ary Feat ur es ATL M-Series User’ s Guide 7 T able 3 Fr ont Panel Featur es Feature Des cription Operator control panel The operator contro l panel consists of the following elements: •G r a p h i c a l u s e r interface (GUI) The GUI displa ys library s tatus informa tion and a llows you to access the li brary menus.[...]

  • Page 26

    Chapte r 1 Overv iew Library Feat ures 8 ATL M -Ser ies U ser’s Guid e Internal Layout 1 Figure 3 ill ustrates the internal l ayout of an A TL M1500 library . Figur e 4 illustrates the internal layout of an A TL M2500 library . Figure 3 A TL M1500 Internal Lay out P o w e r s u p p l y L e f t m a g a z i n e R o b o t i c h a n d R i g h t m a g[...]

  • Page 27

    Cha pter 1 Ov erv iew Libr ary Feat ur es ATL M-Series User’ s Guide 9 Figure 4 A TL M2500 Internal Lay out (Lib rary s h own w ith f ron t b eze l an d d oors remov e d) Level 1 left magazine* Level 3 left magazine* Level 4 left magazine* Level 2 left magazine* *There is a fixed slot behind each left magazine. Level 1 tape drive 1 Level 1 tape d[...]

  • Page 28

    Chapte r 1 Overv iew Library Feat ures 10 ATL M -Ser ies U ser’s Guid e Each ca rtridge magazine holds 10 DL T/SDL T cartridges or 12 L T O cartridges. The bins i n the left magazines ar e number ed fr om 1 thr ough 10 (or 12 in L TO lib raries) fr om front to b ack. The bins in the right magazi nes are numbered f rom 1 through 10 (or 1 2 in L TO[...]

  • Page 29

    Cha pter 1 Ov erv iew Libr ary Feat ur es ATL M-Series User’ s Guide 11 Figure 6 A TL M2500 Back Panel T ape drive T ape drive T ape drive T ape drive T ape drive T ape drive Electronics module V ent V ent V ent V ent Power inlet Power inlets Power switch Power switch V ents V ents V ents SCSI SCSI SCSI SCSI S tackLink motor drive Interlibrary co[...]

  • Page 30

    Chapte r 1 Overv iew Library Feat ures 12 ATL M -Ser ies U ser’s Guid e[...]

  • Page 31

    ATL M-Series User’ s Guide 13 Chapter 2 2 Basic Operations This chapter intr oduces the libr ary GUI screens and expla ins how to use them to perform the fol l owing basic libr ary operations: • V iewing library in formation (s ee Using the Quick V iew Menu Scr een on page 19) • Moving tape cartridges within the l ibrary (see Moving T ape Car[...]

  • Page 32

    Chapte r 2 Basic Operatio ns Introduc tion 14 ATL M -Ser ies U ser’s Guid e Introduct ion 2 Before using the GUI to perform librar y funct ion s, fa mili ariz e yourself with the: • Main scr een • GUI buttons •G U I i c o n s Ma in Scr een 2 The first scr een the GUI displays af ter lib rar y in iti aliz ati on i s th e main scr een. This s[...]

  • Page 33

    Chap ter 2 Basic Opera tio ns Introduc tion ATL M-Series User’ s Guide 15 Figure 7 Sa mple Mai n Screen, S tand-alon e A TL M1500 If the library i s an A TL M1500 and is part of a multiple library stack, the main scr een displays the level of the A TL M1 500 module and pr ovides an addition al button, the St a ck button (see fig ure 8 ). Note: In[...]

  • Page 34

    Chapte r 2 Basic Operatio ns Introduc tion 16 ATL M -Ser ies U ser’s Guid e Figure 8 Sa mple Mai n Screen, A TL M1500 in a Multi ple Library St a c k If the library i s an A TL M2500, the first ma in scr een provides a Level bu tto n an d di sp lays info rm atio n ab out the to p lev el of th e A TL M2500 (see figure 9 and figure 10 ). T o view m[...]

  • Page 35

    Chap ter 2 Basic Opera tio ns Introduc tion ATL M-Series User’ s Guide 17 Figure 10 Sample Main Screen , A TL M2500 GUI Buttons 2 At the bottom of each GUI scr een are up to five button lab els. These labels indi cate the functions of the f ive push buttons below the GUI. T o select a function, pr ess the push button dir ectly below the button la[...]

  • Page 36

    Chapte r 2 Basic Operatio ns Introduc tion 18 ATL M -Ser ies U ser’s Guid e GUI Icons 2 Ta b l e 4 explains the meaning of eac h GUI icon. T able 4 GUI Ic ons Icon Meaning No tape present T ape loading T ape unloadin g Ta p e u n l o a d e d T ape idle Ta p e r e w i n d i n g Locating data Readin g dat a W riti ng data Power on Drive f ault T ap[...]

  • Page 37

    Chap ter 2 Basic Opera tio ns Using t he Quic k View M enu Scree n ATL M-Series User’ s Guide 19 Using the Qu ick V iew Menu Scree n 2 The Quick View Menu screen allo w s you to v iew in form at ion abo ut the library , drives, an d inventory with out placing the lib rary in a NOT READY state. Slot empty Slot occupied Slot occupied - no label or [...]

  • Page 38

    Chapte r 2 Basic Operatio ns Using the Quick View M enu Screen 20 ATL M -Ser ies U ser’s Guid e Accessing the Quick View Me nu Scree n 2 T o access the Quick View Menu screen, press Quick view on the main scree n. The GUI displays the Quick View Menu scr een (see figure 1 2 ). Figure 12 Qu ick Vie w Menu Screen Vie wing Library Information 2 T o [...]

  • Page 39

    Chap ter 2 Basic Opera tio ns Using t he Quic k View M enu Scree n ATL M-Series User’ s Guide 21 Figure 13 Sample Libr ary Inf orm ati on Screen The Library Information screen displ ays the following information a bout the library: • Model • Code version • Boot version • Serial n umber •S C S I b o a r d t y p e •S C S I I D • SCSI [...]

  • Page 40

    Chapte r 2 Basic Operatio ns Using the Quick View M enu Screen 22 ATL M -Ser ies U ser’s Guid e Viewing T ape Drive Information 2 T o view tape drive information using the Quick View Men u scr een: 1 Access the Quick View Menu scr een (see Accessing the Qui ck V iew M en u S creen ). 2 Pre ss Drive . The GUI displays the Drive Information screen [...]

  • Page 41

    Chap ter 2 Basic Opera tio ns Using t he Quic k View M enu Scree n ATL M-Series User’ s Guide 23 Vie wing Inventory Information 2 T o view inventory informati on using the Q uick View Menu screen: 1 Access the Quick View Menu scr een (see Accessing the Qui ck V iew M en u S creen ). 2 Pre ss Inventory . The GUI displays the Invent ory scr een (se[...]

  • Page 42

    Chapte r 2 Basic Operatio ns Using the Quick View M enu Screen 24 ATL M -Ser ies U ser’s Guid e T urning Dri ve Power On or Off (Qui ck Vie w Menu Screen) 2 The Drive Po wer option allows you to turn drive power on or off from the GUI. Use this opti on to turn off drive power when you are hot-swapping a tape drive. T urning Drive Power On or Off [...]

  • Page 43

    Chap ter 2 Basic Opera tio ns Using t he Quic k View M enu Scree n ATL M-Series User’ s Guide 25 The GUI displays the curr ently selected setting in the tape drive box at the top of the screen. 4 Pre ss Apply to save the change and return to the Quick V iew Menu screen. T o r eturn to the Quick View Me nu scr een without changing the power state [...]

  • Page 44

    Chapte r 2 Basic Operatio ns Moving T ape Cartridges 26 ATL M -Ser ies U ser’s Guid e 4 Pre ss Select . The drive power setting i s highlighted. 5 Pre ss the Up or Down buttons to change the curr ent setting. 6 When the desir ed setting is displa yed, press Select . T o exit this scr een without ch anging the drive power setting, pr ess Cancel . [...]

  • Page 45

    Chap ter 2 Basic Opera tio ns Moving T ape Cartridges ATL M-Series User’ s Guide 27 The GUI displays the Move Cartrid ge FROM scree n (see figure 1 9 ). A flashing arr ow indicates the curr ently selecte d sour ce element. Figure 19 Sample Move Cartrid ge FROM Screen 3 If the library i s an A TL M1500 in a multipl e library stack or an A TL M 250[...]

  • Page 46

    Chapte r 2 Basic Operatio ns Moving T ape Cartridges 28 ATL M -Ser ies U ser’s Guid e The GUI displays the Move Cartridge TO scr een (see figur e 20 ). A flashing arr ow indicates the curr ently selected dest ination element. Figure 2 0 Sample Move Cartrid ge TO Screen 6 If the library i s an A TL M1500 in a multipl e library stack or an A TL M 2[...]

  • Page 47

    Chap ter 2 Basic Opera tio ns Moving T ape Cartridges ATL M-Series User’ s Guide 29 The GUI displays the Confir m Move Cartridge scr een (see figure 2 1 ). Figure 21 Sample Confi rm Move Cartridge Sc reen 9 V erify that the GUI dis plays the corr ect source and des tination elements, then pr ess Confirm . T o cancel the cartridge mov e, press Can[...]

  • Page 48

    Chapte r 2 Basic Operatio ns Using the Mailbox 30 ATL M -Ser ies U ser’s Guid e Using the Mail box 2 Using the Mailbox scr een, you can: • V iew mailbox status • Import and export cartridg es • Change the size of the ma ilbox by changing the setti ng of the Import/Export opti on T o access the Mailbox screen, press Mailbox on the main scr e[...]

  • Page 49

    Chap ter 2 Basic Opera tio ns Using the Mailbo x ATL M-Series User’ s Guide 31 Vie wing Mailbox Statu s 2 The Mailbox screen di splays the followin g information: • The current setting of the Import/Export option (see Changing the Import/Export Setting on page 69 for mor e information about the availa ble settings) • Whether the mailbox is op[...]

  • Page 50

    Chapte r 2 Basic Operatio ns Using the Mailbox 32 ATL M -Ser ies U ser’s Guid e Importing a Cartridge in MAP Mode 2 T o import a cartridge in MAP mode: 1 On the main scr een, pre ss Mailbox . The GUI displays the Mailbox scr een (see figure 22 ). 2 Pre ss Open . The GUI displays the Mailbox - OPE N screen (s ee figure 23 ). Figure 2 3 Mailbox - O[...]

  • Page 51

    Chap ter 2 Basic Opera tio ns Using the Mailbo x ATL M-Series User’ s Guide 33 10 Use the Move command on th e Mailbox scre en to move the imported cartridge to a nother data element. 11 If you re moved a data cartridge from the mai lbox, repla ce it: a Repeat steps 1 thr ough 4 to open the mailbox agai n. b Reinsert the data cartridge you remo v[...]

  • Page 52

    Chapte r 2 Basic Operatio ns Using the Mailbox 34 ATL M -Ser ies U ser’s Guid e 2 Use the Move command on the Mailbox screen to move the cartridge you wish to export to the mai lbox. 3 Repeat steps 1a through 1d to open the mai lbox again. 4 Remove the exported cartridge fr om the mailbox. 5 Reinsert the data ca rtridge you removed i n step 1 e ([...]

  • Page 53

    Chap ter 2 Basic Opera tio ns Using the Mailbo x ATL M-Series User’ s Guide 35 Exporting Cart ridges in 10-Slot or 12 -Slot Mode 2 T o export cartridges in 10-slot or 12- slot mode: 1 Use the back up software to export ca rtridges to the top left magazine. 2 On the main scr een, pre ss Mailbox . The GUI displays the Mailbox scr een (see figure 22[...]

  • Page 54

    Chapte r 2 Basic Operatio ns Using the Mailbox 36 ATL M -Ser ies U ser’s Guid e 6 Rei nsert the magaz ine in to t he lib rary . 7 Close the magazine a ccess door . 8 On the Mailbox - OPEN sc reen, pr ess Re-Lock . The librar y locks the magazine ac c ess door and the cartridge is moved under contr ol of the host softwar e to the desir ed loca tio[...]

  • Page 55

    Chap ter 2 Basic Opera tio ns Using the Mailbo x ATL M-Series User’ s Guide 37 Configuring th e Mailbox 2 By defaul t, the Import/Export option is set to MAP . T o change this setting: 1 On the main scr een, pre ss Mailbox . The GUI displays the Mailbox scr een (see figure 22 ). 2 On the Mailbox scr een, press Con fig . The GUI displays the Confi[...]

  • Page 56

    Chapte r 2 Basic Operatio ns Remo ving t he Maga zin es 38 ATL M -Ser ies U ser’s Guid e Removing the Magazines 2 T o remove a ma gazine fr om an A TL M1500 library , see Removing a Magazine fr om an A TL M 1500 . T o remove a ma gazine fr om an A TL M2500 library , see Removing a Magazine fr om an A TL M 2500 . Removing a Magazine from an A TL M[...]

  • Page 57

    Chap ter 2 Basic Opera tio ns Removi ng the Magaz ines ATL M-Series User’ s Guide 39 Figure 24 Sample Relea se Magazin es Screen 2 Press the butt on corresponding to the magazine you want to re l e as e : • T o release both magaz ines, press Bot h . • T o release t he left magazine, pr ess Lef t . • T o release t he right magazine, pr ess R[...]

  • Page 58

    Chapte r 2 Basic Operatio ns Remo ving t he Maga zin es 40 ATL M -Ser ies U ser’s Guid e Removing a Magazin e When th e A TL M1 500 Lib rary Is Power ed Dow n 2 T o remove a magazi ne when the library is power ed down: 1 Look thr ough the viewing window and veri fy that all cartridges ar e fully seate d either in a magazine slot or in the r oboti[...]

  • Page 59

    Chap ter 2 Basic Opera tio ns Removi ng the Magaz ines ATL M-Series User’ s Guide 41 4 T o remove the right magazi ne, grasp the handle at the fr ont of the magazine and slide it forwar d and out of the library . Removing a Magazine from an A TL M25 00 2 The method for rem oving the ma gazines dif fers depending on whether the A TL M2500 library [...]

  • Page 60

    Chapte r 2 Basic Operatio ns Remo ving t he Maga zin es 42 ATL M -Ser ies U ser’s Guid e 2 Pre ss the button correspondi ng to the magazine access door you want to open: • T o release t he top left magazine a ccess door , pres s 1 . • T o release bo th left magazine ac cess doors, pr ess 1& 2 . • T o release t he right magazine access d[...]

  • Page 61

    Chap ter 2 Basic Opera tio ns Removi ng the Magaz ines ATL M-Series User’ s Guide 43 2 T o remove the le vel 1 left mag azine: a Pre ss the button next to the top left ma gazine access door and open the door . b Grasp the handle at the fr ont of the level 1 left magazine and pull it for ward until it s tops. c If the magazine st ops after the fir[...]

  • Page 62

    Chapte r 2 Basic Operatio ns Remo ving t he Maga zin es 44 ATL M -Ser ies U ser’s Guid e f Reach into the li brary underneath the level 1 left maga zine and pull down on the r elease latch (see figure 28 ). Figur e 28 Rele ase Latc h g Whil e h old ing t he re leas e la tch , pu ll t he le vel 1 lef t magazine forwar d and out of the library (see[...]

  • Page 63

    Chap ter 2 Basic Opera tio ns Removi ng the Magaz ines ATL M-Series User’ s Guide 45 Figure 29 Removin g the Le vel 1 Left Magaz ine h Reinsert the lev el 2 left magazine into t he library and close the bottom left magazine access door . 3 T o remove any other mag azine: a Pre ss the button next to the desir ed magazine acce ss door . The magazin[...]

  • Page 64

    Chapte r 2 Basic Operatio ns V iewing S t atistics 46 ATL M -Ser ies U ser’s Guid e V iewing S tatistics 2 This section ex plains how to view library , drive, and SCSI stat istics using the St atistics Menu scr een. Accessing the St atistics M enu Scree n 2 T o access the St atistics M enu screen: 1 On the main scr een, pre ss Menu . The GUI disp[...]

  • Page 65

    Chap ter 2 Basic Opera tio ns Vi ewing S tatistic s ATL M-Series User’ s Guide 47 Figure 31 S t atistics Menu Screen Vie wing Library Stati s t ic s 2 T o view li brary statistics : 1 Access the St atistics Menu scr een (see Accessing the Statistics Menu Screen ). 2 On the St atistics Menu screen, pr ess Libra ry . The GUI displays the L ibrar y [...]

  • Page 66

    Chapte r 2 Basic Operatio ns V iewing S t atistics 48 ATL M -Ser ies U ser’s Guid e This scr een list s the following librar y statistics : •P o w e r O n H o u r s • Slot Fetches Good •S l o t F e t c h e s B a d • Slot Stows Good •S l o t S t o w s B a d •B a r c o d e R e t r i e s • Magazine Inserts •X A x i s D i s t a n c e [...]

  • Page 67

    Chap ter 2 Basic Opera tio ns Vi ewing S tatistic s ATL M-Series User’ s Guide 49 Figure 33 Sample Drive S t atisti cs Screen This scr een lists th e following drive sta tistics: • Drive Fetches Good •D r i v e F e t c h e s B a d • Drive Stows Good • Drive Stows Bad 3 When you have finished viewing the drive statistics, pr ess Back to re[...]

  • Page 68

    Chapte r 2 Basic Operatio ns V iewing the S ta ck Configurat ion 50 ATL M -Ser ies U ser’s Guid e Figure 3 4 Sample SCSI History Screen This scre en lists SCSI com mands by date and time. 3 Pre ss the Up and Down buttons to scroll thr ough the list . 4 When you have finished viewing the SCSI history , press Back to r eturn to the Sta t is ti cs M[...]

  • Page 69

    Chap ter 2 Basic Opera tio ns Viewi ng t he Stack Con figu rat ion ATL M-Series User’ s Guide 51 Figure 35 Sample S t ack Conf iguration Screen This scre en displays the: • Maximum size of the library (this depends on the height of the StackLink inst alled) • Number of li brary modules in stalled in th e stack • Number , location, and SCSI [...]

  • Page 70

    Chapte r 2 Basic Operatio ns V iewing the S ta ck Configurat ion 52 ATL M -Ser ies U ser’s Guid e[...]

  • Page 71

    ATL M-Series User’ s Guide 53 Chapter 3 3 Changing the Library Configuration This chapter explai ns how to change the library co nfiguration using the GUI Configuration scr een. Accessing the Con figuration Scree n 3 T o access the Configuration screen : 1 On the main scr een, pre ss Menu . The GUI displays the Me nu scr een (see fi gur e 36 ).[...]

  • Page 72

    Chapte r 3 Changin g the Libr ary Conf iguration Access ing the Con figuration Screen 54 ATL M -Ser ies U ser’s Guid e Figur e 36 Me nu Screen 2 Pre ss Config . The GUI displays the Configur ation screen ( see fig ure 37 ). Figure 3 7 Config uration Screen[...]

  • Page 73

    Chapte r 3 Changing th e Library Co nfiguratio n Setting the Library ID ATL M-Series User’ s Guide 55 Settin g the Librar y ID 3 By default the library SCSI ID is set to 0. T o change the library SCSI ID setting: 1 Access the Configura tion screen (see Accessing the Configuration Scr een ). 2 Pre ss the Up or Down buttons until Libr ary ID is hig[...]

  • Page 74

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing a T ape Drive ID 56 ATL M -Ser ies U ser’s Guid e Changing a T ape Drive ID 3 By default, the A TL M1500 tape drive SCSI IDs ar e set as f ollows: •D r i v e 1 I D = 1 •D r i v e 2 I D = 2 The A TL M2500 tape drive SCSI IDs ar e set as follows: •D r i v e 1 I D = 1 •D r i v e 2 I [...]

  • Page 75

    Chapte r 3 Changing th e Library Co nfiguratio n Changin g a T ape Drive ID ATL M-Series User’ s Guide 57 T o change a tape drive SCSI ID: 1 Access the Configura tion screen (see Accessing the Configuration Scr een ). 2 Pre ss the Up or Down buttons until the desir ed drive ID (for example, Drive 1 ID ) is highlighted. 3 Pre ss Select . 4 Use the[...]

  • Page 76

    Chapte r 3 Changin g the Libr ary Conf iguration Chan gin g the T er min ator Powe r Set ti ng 58 ATL M -Ser ies U ser’s Guid e Changing the T erminator Power Setting 3 The Te r m i n a t o r P o w e r option control s whether the library rob otics pr ovide terminator power . T o enable or disable r obotics terminator power: 1 Access the Configur[...]

  • Page 77

    Chapte r 3 Changing th e Library Co nfiguratio n Chang ing the Emula tion Settin g ATL M-Series User’ s Guide 59 Changing the Emul ation Settin g 3 The Emu lation option allows you to set the library to act as either a Quantum A TL librar y or an M4 Data library . T o set the emulation: 1 Access the Configura tion screen (see Accessing the Config[...]

  • Page 78

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Sync Negotia tion Setting 60 ATL M -Ser ies U ser’s Guid e Changing the Sync Negotiation Setting 3 The Sync Negotiation option c ontrols whether the li brary roboti cs negotiates synchr onous data transfer mode. Normall y , this negotiation is performed by the host. T o enable or disa[...]

  • Page 79

    Chapte r 3 Changing th e Library Co nfiguratio n Changin g the Wide N egotiatio n Setting ATL M-Series User’ s Guide 61 Changing the W ide Nego tiation Setting 3 The Wide Negotiation option contr ols whether the library r obotics negotiates wide data transfer mode. Normally , this negotiation is performed by the hos t. T o enable or disable Wide [...]

  • Page 80

    Chapte r 3 Changin g the Libr ary Conf iguration Chan gin g the S eria liz ati on Set ti ng 62 ATL M -Ser ies U ser’s Guid e Changing the Se rializ ation Settin g 3 The Serialization option controls how the library r eturns the tape drive serial number when a Read Element Status is r equested. When Se rializa tion is set to On , the tape drive se[...]

  • Page 81

    Chapte r 3 Changing th e Library Co nfiguratio n Changi ng the Short Labels Se tting ATL M-Series User’ s Guide 63 Changing the Short L abels Setting 3 The Short Labels option controls how many bar code label characters ar e returned when the host issues a Read Element Status command. Whe n Short Labels is set to: • Off , all of the b ar code l[...]

  • Page 82

    Chapte r 3 Changin g the Libr ary Conf iguration Changing the Illumin ation Settin g 64 ATL M -Ser ies U ser’s Guid e Changing the Illumination Setting 3 The Illumination option allows you to turn the interior illumination of the library on or of f. This il lumi na tio n al low s yo u t o v iew th e r obotics easily thr ough the viewing window . [...]

  • Page 83

    Chapte r 3 Changing th e Library Co nfiguratio n Changi ng the Off-Li ne T ime Setting ATL M-Series User’ s Guide 65 Changing the Off-Line T ime Setting 3 When you access the Menu screen using the GUI, the lib rary becomes NOT READY and wi ll not respond to a ny SCSI commands issued. If you leave the library unattended in menu mode, the li brary [...]

  • Page 84

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Barcod e Scanner Setti ng 66 ATL M -Ser ies U ser’s Guid e Changing the Ba rcode Sca nner Setting 3 The Barcode Sc anner option contr ols whether the bar code scanner is enabled or dis abled. When the scanner is enabled, the library attempts t o detect a bar code on all ta pe cartridg[...]

  • Page 85

    Chapte r 3 Changing th e Library Co nfiguratio n Changing the Baud Rate Se tting ATL M-Series User’ s Guide 67 Changing the Baud Rate Setting 3 The Baud Rate option contr ols the baud rate set ting of the serial diagnostics port. Y ou can set the baud rate to any standard rate between 1200 baud and 38400 baud. T o set the Baud Ra te : 1 Access th[...]

  • Page 86

    Chapte r 3 Changin g the Libr ary Conf iguration Setting th e Date 68 ATL M -Ser ies U ser’s Guid e The hour setting is highlighted. 4 Use the Up or Dow n butt on s to s el ect the cor rect h o ur s etti ng . 5 Pre ss Select . The minute setting i s highlighted. 6 Use the Up or Down buttons to select the corr ect minute setting. 7 Pre ss Select .[...]

  • Page 87

    Chapte r 3 Changing th e Library Co nfiguratio n Changi ng the Import/Expo rt Setting ATL M-Series User’ s Guide 69 6 Use the Up or Dow n buttons to sele ct the corr ect month. 7 Pre ss Select . The year setting is highli ghted. 8 Use the Up or Dow n buttons to select the corr ect year . 9 Pre ss Select . 10 Pre ss Main to r eturn to the main scr[...]

  • Page 88

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Import /Export Setti ng 70 ATL M -Ser ies U ser’s Guid e T a ble 5 Imp ort /Ex port Settings Impor t/Export Setting Des criptio n MAP When manual access port ( MAP ) is selected, you can use the first slot in the top left ma gazine to import and export cartridges fr om the library . T[...]

  • Page 89

    Chapte r 3 Changing th e Library Co nfiguratio n Changi ng the Import/Expo rt Setting ATL M-Series User’ s Guide 71 To s e l e c t t h e Import/Export se tting: 1 Access the Configura tion screen (see Accessing the Configuration Scr een on page 53). 2 Pre ss the Up or Down buttons until Impo rt/Exp ort is highlighted. 3 Pre ss Select . 4 Use the [...]

  • Page 90

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Auto-C lean Setti ng 72 ATL M -Ser ies U ser’s Guid e Changing the Auto-Clean Setti ng 3 T o enable or disable Auto-Clean : 1 Access the Configura tion screen (see Accessing the Configuration Scr een on page 53). 2 Pre ss the Up or Down buttons until Auto -Cle an i s highlighted. 3 Pr[...]

  • Page 91

    Chapte r 3 Changing th e Library Co nfiguratio n Changin g the Ignor e Host Lock Se tting ATL M-Series User’ s Guide 73 Changing the Ignore Host Lock Se tting 3 The Ignore Host Lock option contr ols whether the library can r elease the mailbox when the host has issued a SCSI command to lock the media: • Enabling this option allows you to r elea[...]

  • Page 92

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Auto-Im port Optio n 74 ATL M -Ser ies U ser’s Guid e Changing the Auto-Impo rt Option 3 The Auto-Import option contr ols how cartridges ar e moved fr om the import/export slots of the mai lbox to the magazine slots: • Enabling this option ca uses the library to move a ny cartridges[...]

  • Page 93

    Chapte r 3 Changing th e Library Co nfiguratio n Changing the Auto-Im port Option ATL M-Series User’ s Guide 75 5 Pre ss Select . T o r eturn to the Configuration s creen without changing the option setting, press Cancel . 6 Pre ss Main to r eturn to the main scr een. Caution: If you do not r eturn to the main scr een after changing this setting,[...]

  • Page 94

    Chapte r 3 Changin g the Libr ary Conf iguration Chang ing the Auto-Im port Optio n 76 ATL M -Ser ies U ser’s Guid e[...]

  • Page 95

    ATL M-Series User’ s Guide 77 Chapter 4 4 Performing Maintenance Operations This chapter ex plains how to perform li brary maintenan ce operations usin g the Mainte nance screen. Accessing the Ma intenan ce Screen 4 T o access the Mainte nance screen: 1 On the main scr een, pre ss Menu . The GUI displays the Me nu scr een. 2 Pre ss Servic e . The[...]

  • Page 96

    Chapte r 4 Performi ng Maint enance Operations Access ing the M aintenance Screen 78 ATL M -Ser ies U ser’s Guid e Figure 3 9 Service Menu Screen 3 Pre ss Main t . The GUI displays the Maintena nce scre en (see figur e 40 ). Figure 4 0 Maint ena nce S cr een[...]

  • Page 97

    Chapter 4 Perform ing Mainten ance Operati ons Cleani ng a T ape Drive ATL M-Series User’ s Guide 79 Cleaning a T ape Drive 4 T o clean a tape drive: 1 Access the Maintenance sc reen (see Accessing the Maintenance Scr een ). 2 Pre ss Clean . The GUI displays the Select Cleaning Cartridge screen (see figure 4 1 ). A flashing arr ow indicates the c[...]

  • Page 98

    Chapte r 4 Performi ng Maint enance Operations Clean ing a T ape Drive 80 ATL M -Ser ies U ser’s Guid e Figure 4 2 Sample Select T ape Drive Screen 6 If the library i s an A TL M1500 in a multipl e library stack or an A TL M 2500, pr ess the Level button to select the level wher e the drive that r equires cleaning is located. 7 Pre ss Drive 1 or [...]

  • Page 99

    Chapter 4 Perform ing Mainten ance Operati ons T urning Drive P ower On or Off (Maintena nce Screen) ATL M-Series User’ s Guide 81 T urni ng Drive Powe r On or Of f (Mainte nance Screen) 4 The Drive Pow er option allows you to turn drive power on or off from the GUI. Use this opti on to turn off drive power when you are hot-swapping a tape drive.[...]

  • Page 100

    Chapte r 4 Performi ng Maint enance Operations T urning D rive Power On or Of f (Mainten ance Scre en) 82 ATL M -Ser ies U ser’s Guid e 3 Pre ss the button that corre sponds to the drive you wish to power on or off: Dr ive 1 or Drive 2 . The GUI displays the curr ently selected setting in the tape drive box at the top of the screen. 4 Pre ss Appl[...]

  • Page 101

    Chapter 4 Perform ing Mainten ance Operati ons Adjustin g the Contras t ATL M-Series User’ s Guide 83 3 Pre ss the Up or Down buttons to highlight the drive you wish to power on or off. 4 Pre ss Select . The drive power setting i s highlighted. 5 Pre ss the Up or Down buttons to change the curr ent setting. 6 When the desir ed setting is displa y[...]

  • Page 102

    Chapte r 4 Performi ng Maint enance Operations Adjustin g the Co ntrast 84 ATL M -Ser ies U ser’s Guid e 3 Pre ss Incr ease or Decrea se to adjust the contrast as desired. 4 When the desir ed contrast is selected, pr ess Select . T o r eturn to the Maintena nce screen without changing the contrast, pr ess Cancel .[...]

  • Page 103

    ATL M-Series User’ s Guide 85 Chapter 5 5 Running Diagnostic Programs This chapter explains how to use the diagnostic pr ograms that ar e availabl e to all users thr ough the Diagnostics Menu scr een. Accessing the Diagnostics Menu Screen 5 T o access the Diagnostics Menu screen: 1 On the main scr een, pre ss Menu . The GUI displays the Me nu scr[...]

  • Page 104

    Chapte r 5 Running Diagnosti c Programs Acce ssing th e Diagn ostics M enu Scre en 86 ATL M -Ser ies U ser’s Guid e Figure 4 6 Service Menu Screen 3 Pre ss Diag . The GUI displays the Diagno stics Menu scree n (see fig ure 47 ). Figure 47 Diagno stics Menu Screen[...]

  • Page 105

    Chapt er 5 Runnin g Diagnost ic Program s Running the Barcode Sc anner T est ATL M-Series User’ s Guide 87 Running th e Barcode Scanner T est 5 The Barcode Sc anner test causes the ba r code scanner to do a complete in ventory of the li brary , scannin g each magazine loca tion for the pres ence of a valid bar code label. To r u n t h e Barcode S[...]

  • Page 106

    Chapte r 5 Running Diagnosti c Programs Runni ng the Barcode Scanner T est 88 ATL M -Ser ies U ser’s Guid e Figure 4 9 Diag: Barcode S creen 6 Pre ss the Up and Down buttons to change the highlighted number . 7 Pre ss Left to move the highlight to the next number . 8 Repeat steps 6 and 7 a s necessary until the desir ed cycle c ount number is dis[...]

  • Page 107

    Chapt er 5 Runnin g Diagnost ic Program s Runni ng the Move Mediu m T est ATL M-Series User’ s Guide 89 Running th e Move Medium T est 5 The Move Me dium test simulates the move ments performed when a SC SI Move Medium command is received via the SCSI interface. To r u n t h e Move M edium test: 1 Access the Diagnostics Menu scr een (see Acce ssi[...]

  • Page 108

    Chapte r 5 Running Diagnosti c Programs Runni ng the Move Mediu m T est 90 ATL M -Ser ies U ser’s Guid e 7 Pre ss the Up and Down buttons to select the sour ce element of the cartridge. 8 When the flashing arrow is next to the desired s ource element, pr ess Select . The GUI displays the Move Cartridge TO scr een (see figur e 51 ). A flashing arr[...]

  • Page 109

    Chapt er 5 Runnin g Diagnost ic Program s Runni ng the Move Mediu m T est ATL M-Series User’ s Guide 91 Figure 52 Sample Confi rm Move Cartridge Sc reen 12 V erify that the GUI dis plays the corr ect source and des tination elements, then pr ess Confirm . The GUI displays the Diag: Move Medium screen, which pr ompts you to set the cycle count (se[...]

  • Page 110

    Chapte r 5 Running Diagnosti c Programs Runni ng the Move Locati on T est 92 ATL M -Ser ies U ser’s Guid e 14 Pre ss Left to move the highlight to the next number . 15 Repeat steps 13 an d 14 as necessary until the desir ed cycle count number is displayed . 16 Pre ss Right until the cursor is all th e way to the rig ht and the Select button appea[...]

  • Page 111

    Chapt er 5 Runnin g Diagnost ic Program s Runnin g the Move L ocation T est ATL M-Series User’ s Guide 93 the selected number of test cycles. The home locati on depends on whether the destination is a tape drive or a magazine slot : • If the destination i s a tape drive, the home location i s slot 1 of the level 1 left magazi ne. • If the des[...]

  • Page 112

    Chapte r 5 Running Diagnosti c Programs Runni ng the Move Locati on T est 94 ATL M -Ser ies U ser’s Guid e 6 Pre ss the Up and Down buttons to select the destination f or the r obotic hand. 7 Pre ss Select . The GUI displays the D iag: Move Lo cation scree n , wh ich pr ompts you to set the cycle count (see figur e 55 ). The rightmost number is h[...]

  • Page 113

    Chapt er 5 Runnin g Diagnost ic Program s Runni ng the Dis play T est ATL M-Series User’ s Guide 95 The test starts a nd the GUI displays a Running Diag scre en. The test stops automati cally after completi ng the selected number of cycles. When the test is complete, the GUI displays a scr een indicating the test status. T o abort the test befor [...]

  • Page 114

    Chapte r 5 Running Diagnosti c Programs Runni ng the Di splay T est 96 ATL M -Ser ies U ser’s Guid e[...]

  • Page 115

    ATL M-Series User’ s Guide 97 Chapter 6 6 Running the Demonstration Programs The A TL M-Series libraries pr ovide several built-in demonstration pr ograms and a confidence test you can use to check whether the r obotics ar e functioning pr operly . Y ou can access the se progra ms thr oug h the Demo Programs sc reen. Accessing the Demo Programs S[...]

  • Page 116

    Chapte r 6 Running the Demon stration Pro grams Runni ng the Confi dence T est Prog ram 98 ATL M -Ser ies U ser’s Guid e Figure 5 6 Demo Programs Scre en Running th e Confiden ce T est Program 6 The Confidence T est pr ogram moves a data cartridge to each tape drive, each magaz ine, and th e fixed slot. The test ends automatically when the c artr[...]

  • Page 117

    Chapter 6 Running t he Demons tration Prog rams Runnin g the Demo 1 Program ATL M-Series User’ s Guide 99 Running th e Demo 1 Program 6 The Demo 1 pr ogram causes the r obot to pick a randomly s elected cartridge from its magazine slot and place it in another randomly select ed magazine slot. To r u n t h e De mo 1 pr ogram: 1 V erify that at lea[...]

  • Page 118

    Chapte r 6 Running the Demon stration Pro grams Runni ng the Demo 2 Program 100 ATL M-S eries User ’s Gu ide Running th e Demo 2 Program 6 The Demo 2 program c auses the robot t o pick a cartridge f rom the fir st occu pied m agazi ne slo t and place it in the ne xt vaca nt magazine slot. The r obot then moves to the next oc cupied slot and r epe[...]

  • Page 119

    Chapter 6 Running t he Demons tration Prog rams Runnin g the Demo 3 Program ATL M -Ser ies U ser’s Guid e 101 Running th e Demo 3 Program 6 The Demo 3 pr ogram causes the r obot to pick a cartri dge from a randomly selected oc cupied magazine slot and place it back in the same slot. The r obot then moves to another randomly s elected occupied slo[...]

  • Page 120

    Chapte r 6 Running the Demon stration Pro grams Runni ng the Demo 4 Program 102 ATL M-S eries User ’s Gu ide Running th e Demo 4 Program 6 The Demo 4 program c auses the robot t o pick a randomly selec ted cartridge fr om its magazine slot a nd place it i n another randomly select ed magazine slot. To r u n t h e Demo 4 program: 1 V erify that at[...]

  • Page 121

    Chapter 6 Running t he Demons tration Prog rams Runnin g the Demo 5 Program ATL M -Ser ies U ser’s Guid e 103 Running th e Demo 5 Program 6 The Demo 5 pr ogram causes the r obot to pick a randomly s elected cartridge fr om its magazine slot and place it i n another magazine slot on another level of the stacked lib rary . This test maximizes the u[...]

  • Page 122

    Chapte r 6 Running the Demon stration Pro grams Runni ng the Demo 6 Program 104 ATL M-S eries User ’s Gu ide Running th e Demo 6 Program 6 The Demo 6 program c auses the X, Y , and Theta axes to move randomly . To r u n t h e Demo 6 program: 1 Access the Demo Progr ams screen (see Ac cessing the Demo Programs Scr een on page 97). 2 Pre ss the Up [...]

  • Page 123

    ATL M -Ser ies U ser’s Guid e 105 Appendi x A A S pecifications This appendix lis ts the following s pecifications fo r the A TL M-Se ri es li brar ies : • Physical •P e r f o r m a n c e • Reliabi lity • Environmental • T ape drive[...]

  • Page 124

    Appendix A S pecific ations Physic al S pecific ations 106 ATL M-S eries User ’s Gu ide Physical S pecifications 1 T a ble 6 Unit Dime nsions/W eight T a ble 7 Capaci tie s A TL M15 00 A TL M25 00 Wid th 19 in . (4 82 mm ) 19 in. (482 mm ) Depth 28.6 in. (726 mm) 28.6 in . (726 mm) Height 6.9 i n. (176 mm) 23.4 in. (595 mm ) Weight 65 lbs. (29 kg[...]

  • Page 125

    Appendix A S pecific ations Physic al S pecific ations ATL M -Ser ies U ser’s Guid e 107 T ype of T ape Cart ridges For use with: • DL T 8000 drives: DL Ttape III or DL Tt ape IV • SDL T 220 driv es: DL Ttape IV * or Sup er DL Ttap e 1 • SDL T 320 dri ves: Super DL Ttape 1 • H P LT O G e n 1 d r i v e s : LT O U l t r i u m cartridges •[...]

  • Page 126

    Appendix A S pecific ations Performan ce S pecifi cations 108 ATL M-S eries User ’s Gu ide Performance S pecificati ons 1 T able 8 Performanc e S pe cifications T a ble 9 Lib rary Performance A TL M1 500 A TL M2 500 A verage Swap Time Less than 10 secon ds Less than 1 1 seco nds Data Capacit y (Excludin g Fixed S lots) * Maximum Data Cap acity (I[...]

  • Page 127

    Appendix A S pecific ations Performanc e S pecif ications ATL M -Ser ies U ser’s Guid e 109 A TL M2500 ( 5 drives) DL T 8000 6.4 TB 6.7 TB 216 GB/ hr L VD SCSI-2 Fast/W ide SDL T 220 17.6 TB 18.5 TB 396 GB/ hr L VD Ultra SCSI SDL T 320 25.6 TB 26.9 TB 576 GB/ hr L VD Ultra 2 SCS I HP L TO Gen 1 19.2 TB 20 TB 540 GB/hr L V D Ultra 2 SCSI HP L TO G[...]

  • Page 128

    Appendix A S pecific ations Relia bility S pecifications 110 ATL M-S eries User ’s Gu ide Reliability S peci fications 1 T able 10 R eliabili ty S pe cifications T ape Drive S pecifi cations 1 T able 1 1 T ape Drive S pe cifications MSBF Sw ap cyc le s 1,00 0,000 swap s MTTR Less th an 20 mi nutes Drive Ty p e Native Mod e With 2:1 Compre ssion T[...]

  • Page 129

    Appendix A S pecific ations Environm ental S p ecificati ons ATL M -Ser ies U ser’s Guid e 111 Environmental S pecifications 1 T able 12 Pow er T able 13 C limate T able 14 Complian ce and Ce rtificatio n A TL M15 00 A TL M25 00 Electric al Input To l e r a n c e s Vo l t a g e 88-264 V AC, 47-63 Hz Power 1 10W (averag e) 300W (a verage) (6 drive[...]

  • Page 130

    Appendix A S pecific ations Environm ental S pecifi cations 112 ATL M-S eries User ’s Gu ide[...]

  • Page 131

    ATL M -Ser ies U ser’s Guid e 113 Appendi x B B Fault Symptom Code (FSC) Dictionary Ta b l e 1 5 lists t he fault symptom codes (FSCs) f or the A TL M-Series lib rarie s. T able 15 Fault Symptom Cod es FSC Name Descripti on FRU Name Confidence % 0001 FSC_DI VIDE_BY_ZER O A divide by zero exception has occurred Micr ocode 100% 0002 FSC_BUS_ P ARIT[...]

  • Page 132

    Appendix B Fault Symptom Cod e (FSC) Dictionary 114 ATL M-S eries User ’s Gu ide 0008 FS C_BAD_FR EE Free() called on bad memor y blo ck Micr ocode 100 % 0009 FSC_BAD _REALLOC Realloc() ca lled on bad memor y blo ck Micr ocode 100 % 000A FSC_HAND_CV Hand CV check found hand disc onnect ed Micr ocode 100 % 000B FSC_SER VO_CV Servo CV check found s[...]

  • Page 133

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 115 0014 FSC_ BAD_MALLOC_ BLO CK_ TR AILE R Heap consistency check found corruption Micr ocode 100% 0015 FSC_ W A TCHDOG_ ERROR An unexpected non- maskable in terrupt has occurred Micr ocode 100% 0016 FSC_MALLO C_ REQUEST_T OO_BIG Size passed to malloc too large Micr [...]

  • Page 134

    Appendix B Fault Symptom Cod e (FSC) Dictionary 116 ATL M-S eries User ’s Gu ide 1000 FSC_ FPGA_INIT_ STUC K_H I FPGA INIT pin wa s detected as bei ng high when it sh ould h ave been low System 100 % 1001 FSC_ FPGA_INIT_N OT_ HI FPGA INIT pin wa s det ecte d as bein g low when it sh ould h ave been high System 100 % 1002 FSC_ FPGA_DON E_ STUC K_H[...]

  • Page 135

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 117 2007 FS C_DRIVE _TIMEOUT_7 D rive time out wa iting for status (drive 7) Drive 100 % 2008 FS C_DRIVE _TIMEOUT_8 D rive time out wa iting for status (drive 8) Drive 100 % 2009 FSC_ DRIVE_OLD_ SYST EM_B OARD Requir es newer vers ion of sys tem board System 100 % 200[...]

  • Page 136

    Appendix B Fault Symptom Cod e (FSC) Dictionary 118 ATL M-S eries User ’s Gu ide 2015 FSC_ INV ALID_STUFF_ BYT E_4 Invalid byte received fr om drive 4 Drive 100 % 2016 FSC_ INV ALID_STUFF_ BYT E_5 Invalid byte received fr om drive 5 Drive 100 % 2017 FSC_ INV ALID_STUFF_ BYT E_6 Invalid byte received fr om drive 6 Drive 100 % 2018 FSC_ INV ALID_ST[...]

  • Page 137

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 119 2023 FSC_ DRIVE_NO_ RESOU RCE Couldn't get semapho re f rom OS Micr ocode 100% 2024 FSC_ COMMAND_ FA I L E D _ 1 Response packet received from drive 1 indicates command failed Drive 100 % 2025 FSC_ COMMAND_ FA I L E D _ 2 Response packet received from drive 2[...]

  • Page 138

    Appendix B Fault Symptom Cod e (FSC) Dictionary 120 ATL M-S eries User ’s Gu ide 202B FSC_ COMMAND_ FA I L E D _ 8 Response packet received from drive 8 indicates command failed Drive 100 % 202C FSC_ SEAGA TE_SCSI_ CMD_E RROR_1 Response packet received from drive 1 indicates command failed Drive 100 % 202D FSC_ SEAGA TE_SCSI_ CMD_E RROR_2 Respons[...]

  • Page 139

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 121 2033 FSC_ SEAGA TE_SCSI_ CMD_E RROR_8 Response packet received from drive 8 indicates command failed Drive 100 % 2034 FSC_HP_BUSY_ 1 Respons e packet received from drive 1 indicates drive busy Drive 100 % 2035 FSC_HP_BUSY_ 2 Respons e packet received from drive 2 [...]

  • Page 140

    Appendix B Fault Symptom Cod e (FSC) Dictionary 122 ATL M-S eries User ’s Gu ide 2102 FSC_I2C_NO_ ACKNOWLEDGEMENT No acknowledge recei ve d from s lav e I 2 C 100% 2103 FSC_I2C_UNAB LE_TO_ SEND_M ESSAGE Exceeded retry limit whi le tr ying to send message I 2 C 100% 2104 FSC_I2C_NO_ RESPONSE _FROM_ HARDW AR E Expected re sponse fr om har dwar e wa[...]

  • Page 141

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 123 2301 FSC_ BARCODE_ TIMEOUT T imed out waiting f or data fr om bar code read er Hand 100 % 2302 FSC_ BARCODE_ READE R_NOT _ INST ALLED Did not detect bar code read er Hand 100 % 2303 FSC_BARCO DE_NO_ READ Barc ode rea der did not find a ba rcode Micr ocode 100% 240[...]

  • Page 142

    Appendix B Fault Symptom Cod e (FSC) Dictionary 124 ATL M-S eries User ’s Gu ide 2409 FSC_ LIBRARIAN_MAG_ REMOV ED Magazine r emoved when door wa s shut Micr ocode 100 % 240A FSC_ LIBRARIAN_MAG_ INSER TED Magazi ne inserte d when no access to it Micr ocode 100 % 240B FSC_LIBRAR IAN_NO_ FREE_SLOTS Demo stopped; no slo t available for cartridge des[...]

  • Page 143

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 125 2413 FSC_LIBRAR IAN_SRC_ ABSE NT Source slot not pr esent (magazin e or drive remov ed ) Micr ocode 100% 2414 FSC_LIBRAR IAN_NO_ ST A RT_SLOT Demo unabl e to s elec t random star t slot (try re-ru nn ing de mo ) Micr ocode 100% 2415 FSC_LIBRAR IAN_ AUTO CLEAN_IN_ [...]

  • Page 144

    Appendix B Fault Symptom Cod e (FSC) Dictionary 126 ATL M-S eries User ’s Gu ide 2504 FSC_ SCSI_INV ALID_ PA G E _ C O D E Bad page cod e in send diagno stic Host 100 % 2600 FSC_ SER VO_ NO_ RESOU RCE SER V O task initiali zation fai led Micr ocode 100 % 2601 FSC _SER VO_QUEUE_ FULL SER VO queue full Micr ocode 100% 2602 FSC_ SER VO_ X_AXIS_ NOT_[...]

  • Page 145

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 127 260B FSC_SER VO_PICKER_ T ACHO_COUNTER_ FA I L U R E The Picker axis tacho counter failed to clear at power- on Hand PW A Syste m P W A 80% 20% 260C FSC_ SER VO_ SHUTTLE_ T ACHO_COUNTER_ FA I L U R E The Shuttle axis tacho counter failed to clear at power- on Hand[...]

  • Page 146

    Appendix B Fault Symptom Cod e (FSC) Dictionary 128 ATL M-S eries User ’s Gu ide 2615 FSC_ SER VO_ NVR_ THET A_DA T A_INV ALID Theta NVR data has been corrupted , or not yet init ializ ed 2616 FSC_ SER VO_ NVR_ FRICTION_DA T A_ INV ALID Axis fricti on NVR d ata has been corrupted, o r not yet initi alized 2617 FSC_ SER VO_ NVR_ OFFSET_DA T A_INV [...]

  • Page 147

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 129 261F FSC_ SER VO_ SHUTTLE_ SENS OR_ F A ILU RE The b ox's sh uttle sens or was not detected during shuttle calibration 2620 FSC_ SER VO_ NVR_ SHUTT LE_ DA T A_ INV ALID Shuttle NVR data ha s been corrupted , or not yet in itia liz ed 2621 FSC_ SER VO_ X_AXIS_[...]

  • Page 148

    Appendix B Fault Symptom Cod e (FSC) Dictionary 130 ATL M-S eries User ’s Gu ide 2628 FSC_ SER VO_ Y_ CALIBRA TION_ERROR The Y axis di d not travel the mini mum distance when calibrating 2629 FSC_SER VO_PICKER_ JAM_RECOVER ED Picker jam occurring, being recovered, but retry now ex hausted 262A FSC_ SER VO_ THET A_ SENS OR_0_F AILURE The Theta sen[...]

  • Page 149

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 131 2631 FSC_ SER VO_ THET A_ FRICTION_TOO_H IGH The Theta axis fricti on is too high for normal oper ation 2632 FSC_SER VO_PICKER_ FRICTION_TOO_H IGH The Picker axis friction is too high for normal oper ation 2633 FSC_ SER VO_ Z_ CALIBRA TION_ERROR The Z axis di d no[...]

  • Page 150

    Appendix B Fault Symptom Cod e (FSC) Dictionary 132 ATL M-S eries User ’s Gu ide 263B FSC_ SER VO_ CLEANING_T APE_ EXPI RE D The cleaning tape in use has expired 263C FSC_ SER VO_ NOT_ CLEANING_T APE The auto-clean cycle has lo aded a non - cleani ng or invalid tape 263D FSC_ SER VO_ SHUTTLE_ NOT_IN_POSIT ION The shuttle has not been detected opp[...]

  • Page 151

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 133 2688 FSC_ SER V O_DRIVE _1_ HANDLE_LOCKED_ OUT Drive 1 wi ll not allo w the handle to be operated as r equired Drive 1 100% 2689 FSC_ SER V O_DRIVE _2_ HANDLE_LOCKED_ OUT Drive 2 wi ll not allo w the handle to be operated as r equired Drive 2 100% 268A FSC_ SER V [...]

  • Page 152

    Appendix B Fault Symptom Cod e (FSC) Dictionary 134 ATL M-S eries User ’s Gu ide 2692 FSC_ SER V O_DRIVE _3_ HANDLE_F AILED_T O_ CLOSE Drive 3 ha ndle failed to close Drive 3 100% 2693 FSC_ SER V O_DRIVE _4_ HANDLE_F AILED_T O_ CLOSE Drive 4 ha ndle failed to close Drive 4 100% 2694 FSC_ SER V O_DRIVE _5_ HANDLE_F AILED_T O_ CLOSE Drive 5 ha ndle[...]

  • Page 153

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 135 269C FSC_ SER V O_DRIVE _5_ HANDLE_F AILED_T O_ OPEN Drive 5 handle failed to open Drive 5 100% 269D FSC_ SER V O_DRIVE _6_ HANDLE_F AILED_T O_ OPEN Drive 6 handle failed to open Drive 6 100% 269E FSC_ SER V O_DRIVE _7_ HANDLE_F AILED_T O_ OPEN Drive 7 handle fail[...]

  • Page 154

    Appendix B Fault Symptom Cod e (FSC) Dictionary 136 ATL M-S eries User ’s Gu ide 26A6 FSC_ SER V O_DRIVE _7_ IN_FLUX Drive 7 is indi cating 'in flux', i. e. not ready for commands Drive 7 100% 26A7 FSC_ SER V O_DRIVE _8_ IN_FLUX Drive 8 is indi cating 'in flux', i. e. not ready for commands Drive 8 100% 26A8 FSC_ SER V O_DRIVE[...]

  • Page 155

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 137 26B0 FSC_ SER VO_ DRIVE_1_ HANDLE_OPEN_ MISM A TCH Drive 1 is indicati ng its handle is ope n, shou ld have been closed Drive 1 Microc ode 50% 50% 26B1 FSC_ SER VO_ DRIVE_2_ HANDLE_OPEN_ MISM A TCH Drive 2 is indicati ng its handle is ope n, shou ld have been clos[...]

  • Page 156

    Appendix B Fault Symptom Cod e (FSC) Dictionary 138 ATL M-S eries User ’s Gu ide 26BB FSC_ SER VO_ DRIVE_4_ HAS_NO_CARTRIDGE Drive 4 has no cartridge to unload Drive 4 Micr ocode 50% 50% 26BC FSC_ SER VO_ DRIVE_5_ HAS_NO_CARTRIDGE Drive 5 has no cartridge to unload Drive 5 Micr ocode 50% 50% 26BD FSC_ SER VO_ DRIVE_6_ HAS_NO_CARTRIDGE Drive 6 has[...]

  • Page 157

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 139 26C5 FSC_SER VO_DRIVE_6_ HAS_NOT_ RESPO NDED _TO_ UNL OAD Drive 6 has not responded to mul tiple requests to unload Drive 6 Microc ode 50% 50% 26C6 FSC_SER VO_DRIVE_7_ HAS_NOT_ RESPO NDED _TO_ UNL OAD Drive 7 has not responded to mul tiple requests to unload Drive[...]

  • Page 158

    Appendix B Fault Symptom Cod e (FSC) Dictionary 140 ATL M-S eries User ’s Gu ide 26CF FSC_SER VO_DRIVE_8_ HAS_REJECTED_THE_ CAR TRIDGE Drive 8 has r ejected the cartridge, cannot be loaded Drive 8 Micr ocode 50% 50% 26D0 FS C_SER VO_DRI VE_1_ HAS_F AILED_TO _LOAD Drive 1 has f ailed to load the tape successfull y Drive 1 Micr ocode 50% 50% 26D1 F[...]

  • Page 159

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 141 26D9 FS C_SER VO_DRI VE_2_ ACCESSED_W HEN_ NOT_FITTED Attempt to in itialize Drive 2 befo re it has beco me av ailabl e Drive 2 Microc ode 50% 50% 26DA FS C_SER VO_DRI VE_3_ ACCESSED_W HEN_ NOT_FITTED Attempt to in itialize Drive 3 befo re it has beco me av ailabl[...]

  • Page 160

    Appendix B Fault Symptom Cod e (FSC) Dictionary 142 ATL M-S eries User ’s Gu ide 2704 FSC_ DIAG_EMP TY_ INITIA TOR_LIST Diag nostic c omman d failure; initiator tas k unknow n Micr ocode 100 % 2800 FSC_EVENT_NO_ RESOU RCE EVENT LOG task initiali zation fai led Micr ocode 100 % 2801 FSC_EVENT_NVR_T OO_ SMAL L NVR space allo cated to even t log is [...]

  • Page 161

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 143 4002 INFO_SCSI_ILLEGAL_ COMMAND Illegal SCS I comman d recei v ed Status o nly 100% 4003 INFO_SCSI_T ARGET_ BUS Y Command received, but library is busy Status o nly 100% 4004 INFO_SCSI_DEFERRED_ ERROR Deferr ed error is pending Status o nly 100% 4005 INFO_SCSI_ A [...]

  • Page 162

    Appendix B Fault Symptom Cod e (FSC) Dictionary 144 ATL M-S eries User ’s Gu ide 400F I NFO_S CSI_ MED IUM_ DESTINA TION_ ELEMENT_FULL Move medium destina tion full Status only 100 % 4010 I NFO_S CSI_ MED IUM_ SOURCE_ELE MENT_ EMPTY Move medium source empty Status only 100 % 401 1 INFO_S CSI _SA VING _ P ARAMETERS_NOT_ SUPP ORTED Saving parameter[...]

  • Page 163

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 145 401A INFO_SCSI_IMPORT_ OR_EXPOR T_ELEM ENT_ ACCESSED Import/export h as been accessed Status o nly 100% 401B INFO_SCSI_ RESE R V A T ION_ CONFLICT Command failed due to reservation conflict Status o nly 100% 401C INFO_SCSI_BUS_RESET SCSI bus reset received Status [...]

  • Page 164

    Appendix B Fault Symptom Cod e (FSC) Dictionary 146 ATL M-S eries User ’s Gu ide 4106 INFO_PCDIAG _ REMOTE_ACK_ TIMEOUT T ime out waiting for remot e AC K Status only 100% 4107 INFO_PCDIAG _ REMOTE_RES PONSE_ TIMEOUT T ime out waiting for remot e R ES PON SE Status only 100% 4108 INFO_PCDIAG _RECVD_ REMOTE_TIMEO UT Remote machine sent time out me[...]

  • Page 165

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 147 440A INFO_LIBRARIAN_ MAG_2_R EMOVED Magazi ne 2 has been removed (right maga zine) Status o nly 100% 440B INFO_LIBRARIAN_ MAG_3_R EMOVED Magazi ne 3 has been remov ed (l eft maga zine) Status o nly 100% 440C INFO_LIBRARIAN_ MAG_4_R EMOVED Magazi ne 4 has been remo[...]

  • Page 166

    Appendix B Fault Symptom Cod e (FSC) Dictionary 148 ATL M-S eries User ’s Gu ide 4414 INFO_LIBRARIAN_ MAG_2_I NSER TED Magazi ne 2 has been inserted (right maga zine) Status only 100% 4415 INFO_LIBRARIAN_ MAG_3_I NSER TED Magazi ne 3 has been inserted (left maga zine) Status only 100% 4416 INFO_LIBRARIAN_ MAG_4_I NSER TED Magazi ne 4 has been ins[...]

  • Page 167

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 149 441E INFO_LIBRARIAN_ MAG_2_A BSENT Magazine 2 absent at power-up (right maga zine) Status o nly 100% 441F INFO_LIBRARIAN_ MAG_3_A BSENT Magazine 3 absent at power-up (left maga zine) Status o nly 100% 4420 INFO_LIBRARIAN_ MAG_4_A BSENT Magazine 4 absent at power-u[...]

  • Page 168

    Appendix B Fault Symptom Cod e (FSC) Dictionary 150 ATL M-S eries User ’s Gu ide 4429 INFO_LIBRARIAN_ DRIVE_1_REMOVED Drive 1 removed Status only 10 0% 442A INFO_LIBRARIAN_ DRIVE_2_REMOVED Drive 2 removed Status only 10 0% 442B INFO_LIBRARIAN_ DRIVE_3_REMOVED Drive 3 removed Status only 10 0% 442C INFO_LIBRARIAN_ DRIVE_4_REMOVED Drive 4 removed S[...]

  • Page 169

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 151 443A INFO_LIBRARIAN_ DRIVE_7_INSER TED Drive 7 inserted St atus only 1 00% 443B INFO_LIBRARIAN_ DRIVE_8_INSER TED Drive 8 inserted St atus only 1 00% 443E INFO_LIBRARIAN_ DRIVE_1_ABSENT Drive 1 abs ent at power-on Status o nly 100% 443F INFO_LIBRARIAN_ DRIVE_2_ABS[...]

  • Page 170

    Appendix B Fault Symptom Cod e (FSC) Dictionary 152 ATL M-S eries User ’s Gu ide 444C INFO_LIBRARIAN_ DRIVE_ 5_ON Driv e 5 ha s powe re d up Status only 100% 444D INFO_LIBRARIAN_ DRIVE_ 6_ON Driv e 6 ha s powe re d up Status only 100% 444E INFO_LIBRARIAN_ DRIVE_ 7_ON Driv e 7 ha s powe re d up Status only 100% 444F INFO_LIBRARIAN_ DRIVE_ 8_ON Dri[...]

  • Page 171

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 153 445D INFO_LIBRARIAN_ DRIVE_ 2_AUTO_ CLEAN_REQ Drive 2 requesting auto- clean Status o nly 100% 445E INFO_LIBRARIAN_ DRIVE_ 3_AUTO_ CLEAN_REQ Drive 3 requesting auto- clean Status o nly 100% 445F INFO_LIBRARIAN_ DRIVE_ 4_AUTO_ CLEAN_REQ Drive 4 requesting auto- cle[...]

  • Page 172

    Appendix B Fault Symptom Cod e (FSC) Dictionary 154 ATL M-S eries User ’s Gu ide 446B INFO_LIBRARIAN_ CLEAN_DRIVE_6 Cleaning cycle started on Dr ive 6 Status only 100% 446C INFO_LIBRARIAN_ CLEAN_DRIVE_7 Cleaning cycle started on Dr ive 7 Status only 100% 446D INFO_LIBRARIAN_ CLEAN_DRIVE_8 Cleaning cycle started on Dr ive 8 Status only 100% 4470 I[...]

  • Page 173

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 155 4478 INFO_LIBRARIAN_ DRIVE_7_CLEAN_ COMPLETE Drive 7 has been cleaned successfully Status o nly 100% 4479 INFO_LIBRARIAN_ DRIVE_8_CLEAN_ COMPLETE Drive 8 has been cleaned successfully Status o nly 100% 447C INFO_LIBRARIAN_ DRIVE_1_CLEAN_ UNSUCCESSFUL Drive 1 is st[...]

  • Page 174

    Appendix B Fault Symptom Cod e (FSC) Dictionary 156 ATL M-S eries User ’s Gu ide 4486 INFO_LIBRARIAN_ LEVEL_1_ REMOVED Module at level 1 in stack h as been power ed down/ disc onnect ed Status only 100% 4487 INFO_LIBRARIAN_ LEVEL_2_ REMOVED Module at level 2 in stack h as been power ed down/ disc onnect ed Status only 100% 4488 INFO_LIBRARIAN_ LE[...]

  • Page 175

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 157 448E INFO_LIBRARIAN_ LEVEL_9_ REMOVED Module at level 9 in stack h as been power ed down/ disc onnect ed Status o nly 100% 448F INFO_LIBRARIAN_ LEVEL_10 _REMOVED Module at level 10 in stack h as been power ed down/ disc onnect ed Status o nly 100% 4490 INFO_LIBRAR[...]

  • Page 176

    Appendix B Fault Symptom Cod e (FSC) Dictionary 158 ATL M-S eries User ’s Gu ide 4499 INFO_LIBRARIAN_ LEVEL_7_ FITTED Level 7 fi tted in stack Status only 100% 449A INFO_LIBRARIAN_ LEVEL_8_ FITTED Level 8 fi tted in stack Status only 100% 449B INFO_LIBRARIAN_ LEVEL_9_ FITTED Level 9 fi tted in stack Status only 100% 449C INFO_LIBRARIAN_ LEVEL_10 [...]

  • Page 177

    Appendi x B Fault Sy mptom Code (FSC) Dictio nary ATL M -Ser ies U ser’s Guid e 159 44A7 I NFO_L IBRA RIAN _ LEVEL_9_NOT_FITTED Level 9 n ot fitted in stack Status o nly 100% 44A8 I NFO_L IBRA RIAN _ LEVEL_10 _NOT_FITTED Level 10 not fitted in stack Status o nly 100% 44A9 I NFO_L IBRA RIAN _ LEVEL_1 1_N OT_FITTED Leve l 1 1 not fitt ed in stack S[...]

  • Page 178

    Appendix B Fault Symptom Cod e (FSC) Dictionary 160 ATL M-S eries User ’s Gu ide 4686 FSC_ SER V O_DRIVE _7_ RELOAD_NE CESSAR Y Drive 7 has r ejected the cartridge, a re load is underway Drive 7 100% 4687 FSC_ SER V O_DRIVE _8_ RELOAD_NE CESSAR Y Drive 8 has r ejected the cartridge, a re load is underway Drive 8 100% 4900 INFO_ST A CK_MASTER This[...]

  • Page 179

    ATL M -Ser ies U ser’s Guid e 161 Appendix C C DL Tt ape Cartridge Maintenance This appendix pr ovides guidelines for handli ng DL T cartridges and visually inspec ting cartridges if necessary . Handling DL Ttape Cartridg es 3 • Always keep each tape cartridge in its pr otective pl astic case when it is no t in the library . • When carrying t[...]

  • Page 180

    Appendix C DL Ttape Cartridge M aintenance V isual Inspe ction of DL Tt ape Cartridg es 162 ATL M-S eries User ’s Gu ide • A void placing tape cartri dges near any sources of high intensity magnetic fields, such as computer monitors or electric motors . • Never apply adhesive labels or POST -IT notes to the top, side, or bottom of your DL T t[...]

  • Page 181

    Appendix C DL Ttape Cartridge Ma intenanc e Visua l In spect ion of DL Ttape Cart ri dges ATL M -Ser ies U ser’s Guid e 163 Visual Inspec tion Procedure 3 T o visually i nspect a DL Ttape cartridge: 1 Check the cartridge for a ny obvious cracks or other physica l damage. 2 Gently shake the ta pe cartridge. Listen for any rattling of loos e pieces[...]

  • Page 182

    Appendix C DL Ttape Cartridge M aintenance V isual Inspe ction of DL Tt ape Cartridg es 164 ATL M-S eries User ’s Gu ide 5 Gently pr ess the hub, then r elease i t. Make sur e the hub springs back into plac e and is still ce ntered wit hin its circ ular opening. 6 Open the tape cartridge door ( see fig ure 58 ): a Gently pre ss up on the tab at t[...]

  • Page 183

    Appendix C DL Ttape Cartridge Ma intenanc e Visua l In spect ion of DL Ttape Cart ri dges ATL M -Ser ies U ser’s Guid e 165 The switch should snap back and forth, and the orange tab should be visib le when the swit ch is in the write-pr otected position. Figure 59 Write Protect Swit ch Write-protect switch[...]

  • Page 184

    Appendix C DL Ttape Cartridge M aintenance V isual Inspe ction of DL Tt ape Cartridg es 166 ATL M-S eries User ’s Gu ide[...]

  • Page 185

    ATL M -Ser ies U ser’s Guid e 167 Appendix D D Regulatory S tatement s This appendix pr ovides the r egulatory statements for the A TL M-S eri es li br arie s, in th e fo llo wing la ngu age s: •E n g l i s h ( p a g e 168 ) • Deutsch (seite 170 ) • Es pañ ol ( pági na 173 ) •F r a n ç a i s ( p a g e 176 ) • Italiano ( pagina 179 ) [...]

  • Page 186

    Appendix D Regul atory S t atemen ts English 168 ATL M-S eries User ’s Gu ide English 4 FCC S tatement 4 This equipment has bee n tested and found to comply with the limits for a Class A digital de vice, pursuant to Part 15 of the FC C Rules. These li mits are designed to provi de r easonable pro tection against harmful interf erence when the equ[...]

  • Page 187

    Appendix D Regul atory S tat ement s English ATL M -Ser ies U ser’s Guid e 169 Industry Canad a (Digital App aratus) 4 Reference : I nterfer ence-Causing Eq uipment Standar d , ICES-003, Issue 2 This Class A digita l apparatus meets all requir ements of the Canadian Interfer ence-Causing Equipment Regulati ons. CISPR-22 W arning! 4 This is a Clas[...]

  • Page 188

    Appendix D Regul atory S t atemen ts Deutsch 170 ATL M-S eries User ’s Gu ide CAUTION : Use of contr ols or adjustments or performance of pr ocedures other than those spec ified her ein may r esult in hazar dous exposure. Library Batt ery S tatement 4 CAUTION: This product contains a Lithium battery . The nonvolatile RAM, Dallas Semiconductor D S[...]

  • Page 189

    Appendix D Regul atory S tat ement s Deut sch ATL M -Ser ies U ser’s Guid e 171 einer im W iderspruch zu di esem Handbuch stehenden Insta llation oder Nutzung Funkstörungen erzeugen kann. Änderungen und Modifikationen an diesem Gerät können zum Erlöschen der Betriebserlaubnis f ür dieses Gerät führen. Der Betrieb dieses Geräts in W ohnge[...]

  • Page 190

    Appendix D Regul atory S t atemen ts Deutsch 172 ATL M-S eries User ’s Gu ide CISPR-22 W arnung! 4 Dies is t ein Produkt der Klasse A. Dieses Pr odukt kann in W ohngegenden Funkstörungen verursachen, die vom V erursacher dur ch angemessene Ma ßnahmen behoben w erden müssen. Hinweis nur für USA und KANADA 4 W enn dieses Produkt in die USA geli[...]

  • Page 191

    Appendix D Regul atory S tat ement s Españo l ATL M -Ser ies U ser’s Guid e 173 Hinweis zur Bibliotheksbatterie 4 VORSICHT: Dieses Pr odukt enthält eine Lithium-Batteri e. Das nichtflüchti ge RAM, Dallas Semico nductor DS1743-100, enth ält eine Lithium-Batteri e. Lithium ist eventuell als gefährli ches Material zu betrac hten. Die Entsor gun[...]

  • Page 192

    Appendix D Regul atory S t atemen ts Espa ñol 174 ATL M-S eries User ’s Gu ide Cualesquiera cambi os o modificacione s realiz ados a este equipo pueden anular la autoridad del usuario para utilizar este e quipo. El uso de este equipo en un ár ea r esidencial puede pr ovocar interfer encias, en cuyo caso será e l usuario quien tenga que correr [...]

  • Page 193

    Appendix D Regul atory S tat ement s Españo l ATL M -Ser ies U ser’s Guid e 175 A viso sólo para EE.UU. y C ANADÁ 4 Si el pr oducto se ha fab ricado para EE.UU., utilice el cable de alimentación UL LISTED que se especifica má s adelante para el funcionamie nto a 100-120 V . Si el producto se h a fabricado para Canadá, utilice el cable de al[...]

  • Page 194

    Appendix D Regul atory S t atemen ts Françai s 176 ATL M-S eries User ’s Gu ide Declaración sobre la batería de la biblioteca 4 PRECAUCIÓN: Este producto c ontiene una batería de li tio. La memoria RAM no vol átil, Dallas Semic onductor DS1743-100, contiene una batería de litio. El li tio puede ser considerado un material peli groso. Desec[...]

  • Page 195

    Appendix D Regul atory S tat ement s Françai s ATL M -Ser ies U ser’s Guid e 177 L'utilisation de c et équipement dans une zone résidentiell e risque de créer des pert urbations auxquelle s l'utilisa teur devra remédi er à ses pr opres f rais. Cet appar eil est conforme à l 'alinéa 15 de la réglementation de la FCC. Le fon[...]

  • Page 196

    Appendix D Regul atory S t atemen ts Françai s 178 ATL M-S eries User ’s Gu ide A vis pour les États-Unis et le Canada uniq uement 4 En cas d'envoi aux Ét ats-Unis, ut ilisez le c âble d'alimentation CLASSÉ UL spécifié c i-dessous pour un fonctionnement à 100- 120 V . En cas d'envoi au Canada, ut i lisez le câb le d'a[...]

  • Page 197

    Appendix D Regul atory S tat ement s Italian o ATL M -Ser ies U ser’s Guid e 179 Réglement ation relati ve à la pil e de la bibliot hèque 4 ATTENTION : Ce pr oduit comporte une batterie au li thium. La mémoir e RAM non-volatil e, Dallas Semiconduct or DS1743-100, comporte une pile au lit hium. Le lithium peut êtr e considéré comme un maté[...]

  • Page 198

    Appendix D Regul atory S t atemen ts It aliano 180 ATL M-S eries User ’s Gu ide Eventuali c ambiamenti o modific he apportati a questa appar ecchiatura potrebb ero invalidar e il diritto dell 'utente ad utilizzar e questa appar ecchiatura. Il funzionamento dell 'appare cchiatura in una zona re sidenziale potr ebbe causar e interfer enze[...]

  • Page 199

    Appendix D Regul atory S tat ement s Italian o ATL M -Ser ies U ser’s Guid e 181 A vverten za CISPR - 22! 4 Questo è un pr odotto di Classe A. In un ambiente dome stico questo pr odotto potrebb e causare interferenze radi o; in tal caso l'utente dovrà ad ottare tutti i dovuti pr ovvedimenti. A vviso esclusivamente per S t ati Uniti e Cana [...]

  • Page 200

    Appendix D Regul atory S t atemen ts Svenska 182 ATL M-S eries User ’s Gu ide Dichiarazione sul la batteria della libreria 4 ATTENZIONE : Questo pr odotto contiene una batteria al litio. La RAM non volatil e, di tipo Dallas Semic onductor DS1743-100, contiene una batte ria al litio. Il liti o potrebbe es sere considerat o un materiale peric oloso[...]

  • Page 201

    Appendix D Regul atory S tat ement s Svenska ATL M -Ser ies U ser’s Guid e 183 Användning av utrustningen i bostadsområden kan orsaka störningar och i såd ana fall måste a nvändaren b ekosta de åtgär der som krävs för att å tgärda störningarn a. Enh eten uppf ylle r del 15 i FCC- re gle rna. Anvä ndni ngen underkastas följande vill[...]

  • Page 202

    Appendix D Regul atory S t atemen ts Svenska 184 ATL M-S eries User ’s Gu ide Meddelande f ör USA och KANADA enbart 4 Om utrustn ingen lever eras i USA, använd de n UL-listade nätsladden som specifi ceras nedan för användning med 100-120 V . Om utrustningen leve reras i Kanada, använd den CSA-ce rtifierade nätsladden som speci ficeras neda[...]

  • Page 203

    Appendix D Regul atory S tat ement s Simplif ied Chin ese ATL M -Ser ies U ser’s Guid e 185 Meddelande om MC300-batteri 4 FÖRSIKTIGHET: Det finns risk för explosion om batteriet inte byts på rätt sätt . Byt enbart till sa mma eller likvär dig batte rityp som rekom menderas av tillverkar en. Kasta förbr ukade batterier i enlighet med till v[...]

  • Page 204

    Appendix D Regul atory S t atemen ts Simplif ied Chin ese 186 ATL M-S eries User ’s Gu ide 4 4 CISPR-22 4 4          !"  #$%&'()*+,-. mp[...]

  • Page 205

    Appendix D Regul atory S tat ement s Simplif ied Chin ese ATL M -Ser ies U ser’s Guid e 187 4 4 4 4 MC300 4 4[...]

  • Page 206

    Appendix D Regul atory S t atemen ts T radit ional Chin ese 188 ATL M-S eries User ’s Gu ide T r aditiona l Chinese 4 FCC 4 1 2 4          !"  #$%&'()*+,-.[...]

  • Page 207

    Appendix D Regul atory S tat ement s T radi tional Chin ese ATL M -Ser ies U ser’s Guid e 189 4 CISPR-22 4 4 4 4[...]

  • Page 208

    Appendix D Regul atory S t atemen ts Jap anese 190 ATL M-S eries User ’s Gu ide 4 4 MC300 4 4 Jap anese 4 FCC 4[...]

  • Page 209

    Appendix D Regul atory S tat ement s Japa nese ATL M -Ser ies U ser’s Guid e 191 1 2 4 Industry Canad a 4 CISPR-22 4          !"  #$%&'()*+,-.[...]

  • Page 210

    Appendix D Regul atory S t atemen ts Jap anese 192 ATL M-S eries User ’s Gu ide 4 4 4 4 4[...]

  • Page 211

    Appendix D Regul atory S tat ement s Korean ATL M -Ser ies U ser’s Guid e 193 MC300 4 4 Korean 4 FCC 4 1 2[...]

  • Page 212

    Appendix D Regul atory S t atemen ts Korean 194 ATL M-S eries User ’s Gu ide 4 4 CISPR-22 4 4          !"  #$%&'()*+,-.[...]

  • Page 213

    Appendix D Regul atory S tat ement s Korean ATL M -Ser ies U ser’s Guid e 195 4 Class 1 4 4 4 MC300 4 4[...]

  • Page 214

    Appendix D Regul atory S t atemen ts Decla ration of Confo rmity 196 ATL M-S eries User ’s Gu ide Declaration of Conformity 4 Figure 60 Declar ation of Co nfor mit y , A TL M1500[...]

  • Page 215

    Appendix D Regul atory S tat ement s Decl arat ion of Co nfor mity ATL M -Ser ies U ser’s Guid e 197 Figure 61 Declar ation of Co nfor mit y , A TL M2500[...]

  • Page 216

    Appendix D Regul atory S t atemen ts Decla ration of Confo rmity 198 ATL M-S eries User ’s Gu ide[...]

  • Page 217

    ATL M -Ser ies U ser’s Guid e 199 Glossary B back panel The panel at the back of the library that contai ns the power switch and connectors for attac hing external cabling to the lib rary . bar code labe l The identification label on cartridges. bar code scanner A las er device that is mounted on the r obotic hand and r eads the cartridge bar cod[...]

  • Page 218

    Glossa ry 200 ATL M-S eries User ’s Gu ide M MTBF Mean T ime Between Failures MTTR Mean T ime T o Repair NN V R A M Nonvolatile random access memory O on-line Ready for communications with a host P pick The act of r emoving a cartridge f rom one locat ion in pr eparation for placing it in another location. place The act of placing a cartridge in [...]

  • Page 219

    ATL M -Ser ies U ser’s Guid e 201 Index A Auto-Clean opt ion, turning on or off 72 Auto-Import op tion, turning on or off 74 – 75 B Back panel 10 Bar code scann er, enabling or disablin g 66 Barcode Scanne r test, ru nning 87 – 88 Baud r ate, settin g 67 C Cartridg e magazin es, removin g 38 – 45 Cartridg es handling 161 – 16 2 importing [...]

  • Page 220

    Index 202 ATL M-S eries User ’s Gu ide D Date , setti ng 68 – 69 Demo nstrat ion p rogr ams, runnin g 97 – 104 Diagnost ic tests , running 85 – 95 Barcode Sca nner test 87 – 88 Display te st 95 Move Locat ion test 92 – 95 Move Medium test 89 – 92 Diagnost ics Menu scree n, accessin g 85 Display t est 95 Drive cleaning 79 – 80 inform[...]

  • Page 221

    Index ATL M -Ser ies U ser’s Guid e 203 Move Loc ati on t est , r unni ng 92 – 95 Move Mediu m test, ru nning 89 – 92 O Off-line time, setting 65 Q Quick View Menu screen 19 – 26 S SCSI his tory, viewi ng 49 SCSI IDs, settin g library 55 tape dri ve 56 – 57 Seriali zation, turn ing on or off 62 Short Labels option, tur ning on or off 63 S[...]

  • Page 222

    Index 204 ATL M-S eries User ’s Gu ide[...]