QNAP VS-6020 Pro manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of QNAP VS-6020 Pro, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of QNAP VS-6020 Pro one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of QNAP VS-6020 Pro. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of QNAP VS-6020 Pro should contain:
- informations concerning technical data of QNAP VS-6020 Pro
- name of the manufacturer and a year of construction of the QNAP VS-6020 Pro item
- rules of operation, control and maintenance of the QNAP VS-6020 Pro item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of QNAP VS-6020 Pro alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of QNAP VS-6020 Pro, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the QNAP service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of QNAP VS-6020 Pro.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the QNAP VS-6020 Pro item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    VioStor NVR Network Video Recorder User Manual (Version: 3.3.2) ©Copyright 2011. QNAP Systems, Inc. All Rights Reserved.[...]

  • Page 2

    2 Thank you for choosing QNAP products! This user manual provides det ailed instructions of using the product. Please read carefully and start to enjoy the powerful fu nctions of the product!  VioStor NVR is hereafter referred to as VioStor or NVR .  This manual provides the descri ption of all the functi ons of the VioStor NVR. The product y[...]

  • Page 3

    3 Important Notice ïŹ Reading instructions Please read the safety warnings and user ma nual carefully bef ore using th is product. ïŹ Power supply This product can only b e used with the power supply provided by the manufacturer. ïŹ Service Please contact qualified tech nici ans for any technical enquires. Do not repai r this product by yourself[...]

  • Page 4

    4 Regulatory Notice FCC STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of FC C Rules. T hese limits are designed to provide rea sonable protection against h armful interferen ce in a residential inst allation. Th is equipment generates, uses, and can radi ate radio fre[...]

  • Page 5

    5 Table of Contents TABLE OF CO NTENTS .............................................................................................................. ....................... 5 SAFETY WARNING ................................................................................................................. .......................... 9 CHAPTER 1. INTRO[...]

  • Page 6

    6 CHAPTER 4. USE THE NVR BY W EB-BASED INTERFACE ............................................................ 61 4.1 C ONNECT TO THE NVR ......................................................................................................................... 61 4.2 M ONITORING P AGE ..................................................................[...]

  • Page 7

    7 6.4.1 SATA Disk ...................................................................................................................... ............. 140 6.4.2 RAID Managem ent Tool ........................................................................................................... .. 143 6.4.3 USB Disk......................................[...]

  • Page 8

    8 CHAPTER 8. LCD PANEL ..................................................................................................................... 202 CHAPTER 9. TROUBLESHOOTING ................................................................................................... 208 APPENDIX A DYNAMIC DOM AIN NAME REGISTRATION..............................[...]

  • Page 9

    9 Safety Warning 1. This product can operate normally in th e temperature of 0ÂșC–40Âș C and relative humidity of 0%–90%. Please make sure the environment is well-ventilated. 2. The power cord and devices connec ted to th is product must provide correct supply voltage. 3. Do not place this product in direct sunlig ht or near chemicals. Make sur[...]

  • Page 10

    10 Chapter 1. Introduction 1.1 Overview QNAP VioStor (hereafter referred to as NVR or VioStor) is the hi gh performance network surveillance solution for ne twork-ba sed monitoring of IP cameras, video recording, playback, and remote data access. Up to 12 0 channels from multiple QNAP NVR servers can be monitored simultaneousl y. The NVR supports I[...]

  • Page 11

    11 1.2 Hardware Illustration 1.2.1 V S-8040U-R P/VS-8032U-R P/VS-8024U-RP 1. LED indicators: Status, LAN, USB, HDD1–8 2. Power button 3. Select button 4. Enter button 5. Power connector 6. Password & network settings reset button 7. RS-232 port 8. VGA 9. USB x 4 10. Gigabit LAN x 2[...]

  • Page 12

    12 1.2.2 VS-8040/VS-8032/ VS-8024 1. One-touch-auto-video-backup button 2. USB 3. LED indicators: Status, LAN, USB, HDD1–8 4. Power button 5. Select button 6. Enter button 7. Power connector 8. Gigabit LAN x 2 9. USB x 4 10. RS-232 port 11. VGA 12. Password & network settings reset button 13. Kensington security slot[...]

  • Page 13

    13 1.2.3 V S-6020 Pro/VS -6016 Pro /VS-6012 Pro 1. One-touch- auto-video-backup button 2. USB 3. LED indicators: Status, LAN, USB, eSATA, HDD1–6 4. Power butto n 5. Sele ct button 6. Enter butto n 7. Power connector 8. Gigabit LAN x 2 9. USB x 4 10. eSATA x 2 (reserved) 11. VGA 12. Password & network settings reset button 13. Kensington secur[...]

  • Page 14

    14 1.2.4 VS-5020/VS-5012 1. One-touch- auto-video-backup button 2. USB 3. LED indicators: USB, Status, HDD1–5, LA N 4. Power butto n 5. Sele ct button 6. Enter butto n 7. Power connector 8. Gigabit LAN x 2 9. USB x 4 10. eSATA (reserved) 11. VGA 12. RS-232 port 13. Password & network settings reset button 14. Kensington security slot[...]

  • Page 15

    15 1.2.5 V S-4016U -RP Pro/VS-4 012U-R P Pro/VS-40 08U-RP Pr o 1. One-touch- auto-video-backup button 2. USB 3. LED indicators: Status, LAN, USB, eSATA, HDD1–4 4. Power butto n 5. Power connector 6. Gigabit LAN x 2 7. USB x 4 8. eSATA x 2 (reserved) 9. VGA 10. Password & network settings reset button[...]

  • Page 16

    16 1.2.6 V S-4016 Pro/VS -4012 Pro /VS-4008 Pro 1. One-touch- auto-video-backup button 2. USB 3. LED indicators: Status, LAN, USB, eSATA, HDD1–4 4. Power butto n 5. Sele ct button 6. Enter butto n 7. Power connector 8. Gigabit LAN x 2 9. USB x 4 10. eSATA x 2 (Reserved) 11. VGA 12. Password & network settings reset button 13. Kensington secur[...]

  • Page 17

    17 1.2.7 V S-4016U -RP 1. One-touch-auto-video-backup button 2. USB 3. LED indicators: USB, Status, HD D1–HDD4, LAN 4. Power button 5. Power connector 6. Gigabit LAN x 2 7. USB x 2 8. Password & network settings reset button 9. VGA[...]

  • Page 18

    18 1.2.8 VS-2012 Pro/VS-20 08 Pro 1. One-touch- auto-video-backup button 2. USB 3. LED i ndicators: HDD1, HDD2, LAN, eSATA 4. Power butto n 5. Power connector 6. Gigabit LAN x 2 7. USB x 2 8. eSATA x 2 (reserved) 9. VGA 10. Password & network settings reset button 11. Kensington security slot[...]

  • Page 19

    19 1.2.9 VS-2012/VS-2008 1. One-touch- auto-video-backup button 2. USB 3. LED i ndicators: HDD1, HDD2, LAN, eSATA 4. Power butto n 5. Power connector 6. Gigabit LAN x 2 7. USB x 2 8. Password & network settings reset button 9. Kensington security slot 10. eSATA x 2 (reserved) 11. VGA[...]

  • Page 20

    20 1.2.10 VS-2004L/VS- 2008L 1. One-touch- auto-video-backup button 2. USB 2.0 3. LED Indi cators: USB, status, HDD1 , HDD2, LAN, power 4. Power butto n 5. Power connector 6. Gigabit LAN 7. USB 2.0 x 2 8. Password & network settings reset button 9. K-Lock security slot 10. Power cord hook[...]

  • Page 21

    21 1.2.11 VS-201P/ V 1. One-touch- auto-video-backup button 2. USB 3. LED i ndicators: USB, status, HDD1, HD D2, LAN, and powe r 4. Power butto n 5. Power connector 6. Gigabit LAN 7. USB x 2 8. Password & network settings reset button  9. Kensington security slot[...]

  • Page 22

    22 1.2.12 VS-1004L 1. One-touch- auto-video-backup button 2. USB 2.0 3. LED Indicators: USB, s tatus , HDD, eSATA, LAN, power 4. Power butto n 5. Power connector 6. Gigabit LAN 7. USB 2.0 x 2 8. Password & network settings reset button 9. K-Lock security slot 10. eSATA 11. Power cord hook[...]

  • Page 23

    23 1.2.13 NVR-104P/V 1. One-touch- auto-video-backup button 2. USB 3. LED indicators 4. Power butto n 5. USB x 2 6. eSATA port 7. Gigabit LAN 8. Password & network settings reset button 9. Power connector 10. Kensington security slot[...]

  • Page 24

    24 1.2.14 VS-101P/ V 1. One-touch- auto-video-backup button 2. USB 3. LED indicators 4. Power butto n 5. Power connector 6. Gigabit LAN 7. USB x 2 8. Password & network settings reset button 9. Kensington security slot 10. eSATA port (reserved)[...]

  • Page 25

    25 Chapter 2. Install the NVR For the informat ion of hardware inst allation, see th e ‘Quick Installation Guide’ (QIG) in t he product package. You can also fi nd the QI G in the product CD -ROM or QNAP website ( http://www.qnapsecuri ty.com/ ). 2.1 Personal Computer Requirements For better system performan ce, your computer shou ld at least f[...]

  • Page 26

    26 Security Settings of the Web Browser Please make sure the security level of t he IE browser in Inte rnet Options is set to Medium or lower.[...]

  • Page 27

    27 2.2 Browse CD-ROM Run the product CD-RO M on your Windows PC , you can view t he Quick Installation Gui de (QIG) and user manual, and install codec and so ftware utilities Finder and VioStor Player.[...]

  • Page 28

    28 You can browse the CD-ROM a nd access the following contents: ïŹ Finder: The setup program of QNAP Finder. This tool is us ed to discover the NVR servers available on th e local network and configure the network settings of the NVR. ïŹ Manual: The user manuals of NVR. ïŹ QIG: View the hardw are installatio n instruct ions of NVR. ïŹ Codec: T[...]

  • Page 29

    29 2.3 Hard Disk Drives Compatibility List This product works wi th 2.5-inch and 3.5-inc h SATA hard disk drives from popular hard disk brands. For the hard disk compatibil ity list, please visit http://www.qnapsecurity.com/pro _compatibility.asp QNAP disclaims any respon sibility for product dama ge/malfunction or data loss/recovery due to misuse [...]

  • Page 30

    30 2.5 Check System Status LED Display & Syst em Status Over view LED Colour LED Status Description Flashes green and red alternately every 0.5 sec 1) A hard drive on the NVR is being format ted 2) The NVR is being initia lised 3) The system firmware is being updated 4) RAID rebuilding is in process 5) Online RAID Capacity Ex pansion is in proc[...]

  • Page 31

    31 Flashes red The hard drive data is being accessed and a read/write error occurs during the process Red A hard drive read/write error occurs Flashes green The hard drive data is being accessed HDD Red/ Green Green The hard drive can be accessed Flashes blue every 0.5 sec 1) A USB device is detected 2) A USB device is being removed from the NVR 3)[...]

  • Page 32

    32 Beep Alarm (beep al arm can be disabled in ‘System Tools’ > ‘Hardware Settings’) Beep sound No. of Times Description Short beep (0.5 sec) 1 1) The NVR is starti ng up 2) The NVR is being shut down (software shutdown) 3) The reset button is pre ssed 4) The system firmware has been updated Short beep (0.5 sec) 3 The NVR data cannot be c[...]

  • Page 33

    33 2.6 System Configuration Install Finder 1. Run the product CD , the following menu is shown. Click ‘In stall Find er’. 2. Follow the instruct ions to install Fin der. Upon successful installation, run Finder. If Finder is blocked by y our firewall, unblock it . 3. Finder detects the NVR servers on the loca l network. If the server has not be[...]

  • Page 34

    34 4. You must enter the administ rator name and password to perform quick setup. The default administrator name an d password are as below: Use name: admin * Password: admin *If you are using the VS-201/VS-101/NV R-10 4, the default login name is ‘administrator’ and the login password is ‘admin’. Note: Make sure all the IP cameras are conf[...]

  • Page 35

    35 6. Click ‘Start inst allation’ to execut e the quick configu ration. 7. After the quick configur ation, you can start to use the NVR. Cli ck ‘Start Monitoring’ to view the live video from the IP ca meras or click ‘Close’ to return to t he home page of the system administration.[...]

  • Page 36

    36 8. The first time you con nect to the monitoring page of t he NVR, install the ActiveX add-on. You can view the live video from the IP cameras configured on the NVR and the recording status of each channel.[...]

  • Page 37

    37 Chapter 3. Use the NVR by Local Display Note: This feature is supported by the VioStor Pro Series NV R only. The models inclu de VS-8040U-RP, VS-8032U-RP, VS-8024U-RP, VS-8040, VS-8032, VS-8024, VS-6020 Pro, VS-6016 Pro, VS-6012 Pro, VS-4016U-RP Pro, VS-4012U-RP Pro, VS-4008U-RP Pro, VS-4016 Pro, VS-4012 Pro, VS-4008 Pro, VS-2012 Pro, VS-2008 Pr[...]

  • Page 38

    38 When the NVR is turned on, the login screen will be show n. Select the lan guage. Enter the administrator name and pass word. If the NVR has not been configured, ski p the login page and enter Quick Configuration (refer to Chapter 3.1). Defaul t user name: admi n Password: admin Click the ke yboard icon to enter the necessary i nformation if you[...]

  • Page 39

    39 3.1 Quick Configurati on If the NVR has not been configu red, Quick Configurat ion Wizard will be sh own. Follow th e instructions of the wizard to complete the s ystem setup. Note: All the changes will be effectiv e only after you apply the set tings in the last step. 1. The system inf ormation will be show n. Select th e language and click ‘[...]

  • Page 40

    40 2. Change the admin password or use the default password (admin). 3. Select to obtain the network setti ngs automatically or enter the network settings.[...]

  • Page 41

    41 4. Enter the date and time settings. You ca n sele ct to sy nchronize the server ti me with an Internet time server. If you enter a doma in name for the NTP server, make sure you have set up a correct DNS server. 5. Select the disk configu ration. C lick ‘Disk Information ’ to view the hard disk drive details. Note that all the disk data wil[...]

  • Page 42

    42 6. Configure the IP camera sett ings. If no IP cameras h ave been set, you will be prompted to search for the cameras on the loca l network. a. The cameras found will be shown . Select the IP cameras and click ‘Add’ to add the channels.[...]

  • Page 43

    43 b. To manually add an IP camera or edit the came ra settings, click  . c. Enter the camera settings. Click ‘Test’ to test the connection. Click ‘Remove’ to delete the camera.[...]

  • Page 44

    44 d. To edit the recording settings, click  next to ‘Recordi ng Settings’. Define the recording settings and click ‘OK’.[...]

  • Page 45

    45 7. Verify the sett ings and click ‘Next’ to in itialize t he server. 8. After the system has been in itialized, you can start to use the NVR. Click ‘Start Monitoring’ to enter the monitoring screen.[...]

  • Page 46

    46 3.2 System Configuration To manage the system settings such as administrator password , network and ti me settings, click on the monitoring screen. Not e that this button ( option) will only be sh own when you login as an administrator. Select the language and click the icons to configure the se ttings.[...]

  • Page 47

    47 Icon Description Perform quick conf iguration of th e system. Change the administrator passw ord to login local display. Change the net work settings. Change the date and ti me settings. Configure the disk volume an d initialize the hard disks. Configure the network camera settings.[...]

  • Page 48

    48 3.3 Monitoring Upon successful lo gin, the monitoring screen will be shown. You can monitor the IP cameras, change the display mode, enable or disable manual recording, control the PTZ cameras, and so on. View video image and IP camera info Camera list Select monitoring mode PTZ camera control panel[...]

  • Page 49

    49 Icon Description Monitor: Enter the monitori ng page. Playback: Enter the playback page. Configuration: Enter the system configuratio n page; allows admin access only. Options: Configure the event notifi cation settings, video window di splay settings, screen resolution, etc. Hide left pan el: Hide the panel on the left of the monitori ng page. [...]

  • Page 50

    50 Event notification: When the alarm recording is enab led and an event is detected, this icon will be sh own. Click t his icon to view the alert details. You can turn on or off the alert sound. To clear all th e logs, click ‘Clear All’.[...]

  • Page 51

    51 PTZ Control Panel The term ‘PTZ’ stands fo r ‘Pan/Tilt/Zoom’. If your IP camera supports PTZ, yo u can use the control panel on the NVR to adjust the viewing an gel of the IP camera. These functions are available depending on the camera models. Please consult the ca mera’s documentation for det ails. Note that the digital zoom function[...]

  • Page 52

    52 Display Mode The NVR supports various display modes for moni toring. C lick the correct icon to swit ch the display mode. Icon Description Full screen Single-channel mode 4-channel mode 6-channel mode 8-channel mode 9-channel mode 10-channel mode 12-channel mode Select the display page number Sequential mode. This mode can be us ed with other di[...]

  • Page 53

    53 Live View Screen Upon successful configuration of the IP came ras, you can enter the monitoring screen to view the live video from the cameras. If the camera supports pan and tilt functi on s, you can click the channel on the screen and adjust the viewing an gle with a mouse. If zooming is supported, you can scroll the mouse wheel to zoom in or [...]

  • Page 54

    54 Camera Status The camera status is indicate d by the icons shown below: Icon Camera Status Scheduled or continuous recording is in process This IP camera suppo rts audio function This IP camera supports PTZ function Manual recording is enabled The recording triggered by advanced ev ent management (‘Camera Settings’ > ‘Alarm Settings’ [...]

  • Page 55

    55 Connection Message When the NVR fails to display the v ideo of an IP camera, a message will be shown in the channel window to i ndicate the status. Message Description Connecting If the IP camera is located on remote network or the Internet, it may take some time to establish the connection to the camera. Disconnected The NVR cannot connect to t[...]

  • Page 56

    56 Options To configure advanced monitor settings, cl ick . The following options are provid ed under the ‘General’ tab. ïŹ Event Notificati on: When this opti on is enabled and an event is trigger ed, the alert icon will be shown on the monitorin g channel instant ly. C lick the icon to view th e alert details. ïŹ Display Order: Click ‘Res[...]

  • Page 57

    57 The following options are provided under the ‘Video’ tab. ïŹ Highlight the video win dow when an event is triggered: The video win dow will flash if an event is triggered. ïŹ Display unauthori zed channels: Select this opti on to show the channe ls that the user does not have access right to monitor. ïŹ Display unconfigured c hannels: Sel[...]

  • Page 58

    58 The NVR detects the resolution settings s uppo rted by the connected monitor and selects the most appropriate setting au tomatically. To change the screen resolution, click ‘Settings’ under the ‘Screen’ tab. After config uring the resolution settings, you will enter the monitoring screen. If the monitor model cannot be detected , the NVR[...]

  • Page 59

    59 3.4 Video Playback You can play the videos on the NVR by the lo cal display. To use this feature, click on the monitoring screen. Most of the icons on the playback screen are the same as those on the monitoring screen. Please refer to Chapter 3.2 for the icon description. Note: You must have the playback access right to the IP camera s to pl ay [...]

  • Page 60

    60 Playback Settings: You can play, pause, stop, reverse play a video file, or select to play the previous or n ext file. When playing a video, you can use the scroll ba r to adjust the playback speed or click the digital zoom icon to zoom in or zoom out the video. You can also right click the IP camera channel and select the foll owing options: a.[...]

  • Page 61

    61 Chapter 4. Use the NVR by Web-based Interface You are recommended to use Microsoft Interne t Explorer to monitor the IP cameras and manage the functions of t he NVR. Important Notice: Before using the NVR, make sure you have inst alled the hard disks in the server correctly and finished the disk format ting and configur ation. Otherwise, th e se[...]

  • Page 62

    62 2. Enter the user name and pas sword to login the NVR. Default user name: admin * Default password: admin * If you are using the VS-201/VS-101/NVR-10 4, the login name is ‘administrator’ and the login password is ‘admin’. 3. To view the li ve video, install the ActiveX add- on.[...]

  • Page 63

    63 4.2 Monitoring Page Upon successful login, the monitoring page w ill be shown. Select the display language. You can start to co nfigure the sys tem setti ngs and use the monitoring and recordi ng functions of the server. View monitoring channel and details PTZ control p anel System firmware Adjust display mode Server name[...]

  • Page 64

    64 Icon Description Multi display mode: The NVR supports mult i-display mode. (This function can only be used when the computer o r the host is connected to multiple monitors. ) Multi-server monitoring: Up to 120 channels from multiple QNAP NVR servers can be monitored. Select language: Select the display langu age. E-map: Display the location of t[...]

  • Page 65

    65 Login netw ork camera homepage: Select a channel and click thi s button to go to the homepage of the selected IP camera. Event notification: When the alarm recording is enab led and an event is detected, this icon will be shown. C lick this icon to view th e alert details. Digital z oom: Select a channel and clic k this button to en able the dig[...]

  • Page 66

    66 Note: 1. Enabling or disabling the manua l recording feature will not af fect the scheduled or alarm recording. 2. By default, the snapsho ts are saved in ‘My Documents ’ or ‘Documents’> ‘Snap shots’ on your Windows OS. 3. If the snapshot time is inconsisten t with the actual time that the s napshot is taken, it is caused by the n[...]

  • Page 67

    67 Right click the monit oring channel on the liv e view page. The following functions are available depending on the IP camera model. a. Connect to camera homepage. b. Camera settin g: Enter the configuration page of the IP camera. c. PTZ: Pan/Tilt/Zoom camera control. d. Preset: Select the preset positions of the PTZ camera. e. Enable live tracki[...]

  • Page 68

    68 To configure other monit oring options, right click a ch annel and select ‘P roperties’. Streaming: ïŹ Always stream from the server: S elect this option to stre am the audio and video data from the NVR. If your computer c annot co nnect to the network cameras, select this option to allow the NVR to stream t he data; no extra port forwardin[...]

  • Page 69

    69 Display Mode: ïŹ Fit image to window: S elect this option to fit a n image to the browser window. You may also specify to keep the aspect ratio when resizing an image. ïŹ Display image in original size: Select this opti on to display an image in its original siz e if it is smaller than t he browser window. Sp ecify also how an image will be re[...]

  • Page 70

    70 Video Resolution: Specify to adjust resol ution automatically or use fixed resol ution. If you select to adjust resolu tion automatically, the NVR will select the resolution set ting* which best fits the size of the IE browser wi ndow. Note that ‘Stream f rom network camera’ will not be available if the network camera does not support stream[...]

  • Page 71

    71[...]

  • Page 72

    72 4.2.1 Live Video Window The live videos of the IP camera s co nfigured on the NVR are shown on the monitoring page . You can click the cha nnel window to use the features supported by the IP camera, e.g. digital zoom or pan/tilt/zoom.[...]

  • Page 73

    73 Camera Status The camera status is indicate d by the icons shown below: Icon Camera Status Scheduled or continuous recording is in process This IP camera suppo rts audio function This IP camera supports PT function Manual recording is enabled The recording triggered by advanced ev ent management (‘Camera Settings’ > ‘Alarm Settings’ &[...]

  • Page 74

    74 4.2.2 Display Mode The NVR supports different display modes for viewing the monitoring channels. 4.2.3 PTZ Camera Control Panel The term ‘P TZ’ stands for ‘Pan/Tilt/Zoom’. If an IP camera supports the PTZ feature, you can use the control panel on the NVR to adjust the viewing angel of the IP camera. These functions are available dependin[...]

  • Page 75

    75 4.2.4 Multi-server Monitoring Follow the steps below to use the multi- server monitoring feature of the NVR. 1. Click ‘Server List’ on the monitoring page. a. Click ‘Auto Detect’ to se arch for the NVR on the LAN and add the server to the server list. b. Click ‘Add’ to add the NVR to the server list. 2. Up to 120 channels from multip[...]

  • Page 76

    76 4.2.5 Monitor Settings To con figure advanced monitor settings, cli ck . The following options are provid ed under the ‘General’ tab. ïŹ Event Notificati on: When this opti on is enabled and an event is trigger ed, the alert icon will be shown o n the monitoring cha nnel instantly. Click the icon to view the alert details. ïŹ Display Order[...]

  • Page 77

    77 The following options are provided under the ‘Video’ tab. Video Streaming ïŹ Stream from the server: If you ca nnot connec t to the IP c amera from your computer, select this option and th e video will be stre amed from the NVR. This option does not require extra port mapping configurati on; but may influence the performance of the NVR. ïŹ[...]

  • Page 78

    78 The following options are provid ed under the ‘Snapshot’ tab. Snapshot: Specify the location where the snap shots are saved and the image format (JPEG or BMP). Show timestamp and camera name: Show the timestamp and the camera name on the snapshot. Save the snapshot as it is displayed: Select this option to save the snapshot as it is displaye[...]

  • Page 79

    79 4.2.6 Auto Cruising The au to cruising feature of the NVR is used to configure the PTZ cameras to cruise according to the preset positions and the st aying time set for ea ch preset position. To use the auto crui sing feat ure, follow the steps below. 1. On the monitoring page of t he NVR, click to go to the configuration pa ge of the PTZ camera[...]

  • Page 80

    80 4. Click the number buttons to view the preset positions of the PTZ camera. When you click the button , the name of the corresponding preset positi on is shown on the ‘Preset Name’ drop-down menu.[...]

  • Page 81

    81 5. Add: To add a setting for au to cruising, select the ‘Pre set Name’ from the drop-down menu and enter th e staying time (in terval, in second s). Click ‘ Add’. 6. Update: To change a setting on the list, highligh t the selection. Select another preset position from the drop-down menu and/or change the stay ing time (interval) . Click [...]

  • Page 82

    82 8. After configuring the auto cruisi ng settings, select the option ‘Ena ble auto cruising’ and click ‘OK’. The NVR will start auto cruising acc ording to the settings. Note: 1) The default staying time (interval ) of the pr eset position is 5 se conds. Yo u can enter 5–999 seconds for this setting. 2) The system supports up to 10 pres[...]

  • Page 83

    83 Chapter 5. Play Video Files The NVR provides an intuit ive web interface t o search and play the recording files with out any extra software required. You can a ccess the video files on LAN or WAN. The first tim e you connect to the playback interface of the NVR by an I E browser, you will be prompted to install an Act iveX plugin. Follow the in[...]

  • Page 84

    84 5.1 Use the Web-based Playback Interface (VioStor Player) 1. Click the playback button on the monitoring page. 2. VioStor Player will be shown. You can use this program to search a nd play the recording files on the NVR servers. To return to the monitoring page, click . To enter the system admini stration page, click . Note: You must have the ac[...]

  • Page 85

    85 5.1.1 Connect to Server for Playback 1. C lick ‘Play by Time’ .[...]

  • Page 86

    86 2. The following dial og will be shown.[...]

  • Page 87

    87 3. Configure servers: a. Add: Add a server. b. Modify: Modify a server. c. Remove: Remove a server. d. Auto: Auto-search servers. e. Default settings: Enter the defa ult user name and pass word for all newly added servers.[...]

  • Page 88

    88 4. Select the data search mode.  Date and tim e sear ch (Text entry) i. Select the NVR server(s) and the IP camera(s)*. ii. Click the ‘Text entry’ tab. iii. Select the recording type, the start and end time when the video is recorded. iv. Click ‘Preview’ to preview the video. v. Click ‘OK’ . * You can select 4 IP cameras at maximu[...]

  • Page 89

    89  Timeline search i. Select the NVR server(s) and the IP camera(s)*. * You can select 4 IP cameras at maximum. ii. Cli ck the ‘Graphical entry’ tab.[...]

  • Page 90

    90 iii. Select the recording type. iv. Specify the time range when the files are recorded. The settings will be applied to all the cameras selected. v. C lick ‘Preview’ to preview the video. vi. Click ‘OK ’.[...]

  • Page 91

    91  Event entry i. Select the NVR server(s) and the IP camera(s)*. * You can select 4 IP cameras at maximum. ii. Cli ck the ‘Event entry’ tab.[...]

  • Page 92

    92 iii. Select the event type. iv. Specify the time range when the files are recorded. v. Specify the number of minutes to play th e video recorded before and after the event.[...]

  • Page 93

    93 vi. Event search. Use this function to sear ch for all the events occurred on the IP cameras. You may refer to the event de tails to search for the recording data.  Search all: Search for the specified ev ents occurred on all t he IP cameras of an NVR within the time range specified.  Search: Search for the specified events occurred on o n[...]

  • Page 94

    94 5. When the files are shown, you can play the video. Note: The regular recordings ar e shown in white and the al arm recordings are shown in red on the playlist.[...]

  • Page 95

    95 5.1.2 Play Video Files from Your Computer 1. C lick ‘Add files’ .[...]

  • Page 96

    96 2. Browse and select the files. 3. The playlist will be shown. Click ‘Play’ to start playing.[...]

  • Page 97

    97 5.1.3 Quad-view Playback The quad-vi ew playback feature allows you to search for the video recorded by the NVR servers quickly. You can view the videos of four IP cameras simultaneously or select to divide the video of one IP camera into four time periods and play them in a quad-view window.  Divide the selected ti me equally into four playb[...]

  • Page 98

    98  Play the video of four IP cameras Select four IP cameras. Enter the search criteria in the ‘Text entry’ or ‘Graphical entry’. When the search resu lts are shown, you can play the vi deo files of the four IP cameras simultaneously.[...]

  • Page 99

    99 5.1.4 Intelligent Video Analytics (I VA) T he NVR supports intell igent video analytics for vide o data search. The following features a re supported:  Motion detection: De tects the movement of the objects i n the video.  Foreign object: Detects new object in the video.  Missing object: Detects missing object in the video.  Out of f[...]

  • Page 100

    100 2. On the playback window, click .[...]

  • Page 101

    101 Note:  When the option ‘Pause wh en found’ is selected, the data search stops when a video file which matches the search criteria is found.  When ‘Highlight th e detection zone’ is en abled, the moving object s will be highlighted in red brackets ; the foreign or missing objects w ill be highlighted in yellow brackets; the video w[...]

  • Page 102

    102 6. Define the detection zone. Mouse over the edge of the red zone and use the mouse to define the detection zon e. Click ‘Select al l’ to highlight the entire area.[...]

  • Page 103

    103 7. Define the object size for detection. Use the mouse to drag the yellow zone to define the minimum object size for detection. Note: After this option is enabled, all the object s smaller than the yellow zon e will be ignored for detection.[...]

  • Page 104

    104 8. Click ‘Search’ to start search ing the video by IVA. The results will be show n.[...]

  • Page 105

    105 Note:  Double click an entry on the search r esult dialog to play the video. The player will play the video starting from 15 seconds before the event to 15 seconds after the event.  Right click an entry on the search result di alog to export the video and save it on your computer. The exported video starts from 15 seconds be fore the even[...]

  • Page 106

    106 5.1.5 Convert to AVI File You ca n save the video files recorded by the NVR as AVI file s to your PC. Note: You must have the playback authority of the IP camera to use this feature . Follow the steps below to sa ve t he video from the NVR. 1. Click ‘Convert to AVI file’.[...]

  • Page 107

    107 2. The following screen will be shown. 3. Select an NVR server and an IP camera.[...]

  • Page 108

    108 4. Select the recording type. 5. Specify the time range for the search. 6. Click ‘Preview’ to preview the video. 7. Click ‘OK’. Enter the file name and specif y the location where the file is saved to. 8. The file will be converted int o AVI format.[...]

  • Page 109

    109 5.2 Digital Watermarking The NVR supports digital watermarking to pro tect the videos and snapshots from unauthorized modi fication. You can add digi tal watermark on the exported video and snapshot by VioStor Player. A permanent digita l signal will be added to the exported files for digital watermarking. The watermark ca nnot be removed and i[...]

  • Page 110

    110 3. Select to add digital watermark in the exported snapshot or video. 4. Select the recording files (refer to Chap ter 5). 5. C lick to convert the video fi les into AVI format.[...]

  • Page 111

    111 6. Click to start playing and exporting the files. Note: Whe n you click again, the NVR will stop exporting t he files and resume to the playback mode.[...]

  • Page 112

    112 5.2.2 Watermark Proof T he Watermark Proof utility is in stalled automa tically along with VioStor Player. From the Windows Start menu, select ‘ All Programs’ > ‘QNAP’ > ‘Player’ to locate ‘Watermark Pr oof’. Run Watermark Proof. The following window will be shown. Click to browse and locate the files. You ca n select mult[...]

  • Page 113

    113 Click to check the files and view the proof resu lt. If you select ‘Stop when watermark error is detected’, the checking process will stop if a f ailed file is detected. Otherwise t he program will check all the fi les you have select ed. If a file has been modified, the proof result will be sh own as ‘Failed’.[...]

  • Page 114

    114 5.3 Access the Recording Data You can access the reco rding data on the NVR by the following services: ïŹ Windows Network Neighb ourhood (SMB/CIFS) ïŹ Web File Manager (HTTP) ïŹ FTP Server (FTP) Note:  To access the video files by these protocols, you must enter the user name and password with the admini strator access right.  To use t[...]

  • Page 115

    115 5.3.1 Windows Network Neigh bourhood (SMB/CIFS) You ca n access the video files by the SMB/CIFS protocol on Windows OS. ïŹ On the web-based playback interface, click ‘SMB’. ïŹ Run NVR_IP from the Windows Start menu . For example, if your NVR IP is 10.11.19.27, enter 10.11.19.27 . 5.3.2 Web File Manager (H TTP) To access the recording[...]

  • Page 116

    116 5.3.3 FTP Server (FTP ) You ca n access the recording data b y FTP: ïŹ On the web-based playback interface, click ‘FTP’. ïŹ In Windows Internet Explorer, en ter ftp://username:password@NVRI P/ . For example, enter ftp://admi n:admin@172.17.26.154/ if th e NVR IP is 172.17.26.154.[...]

  • Page 117

    117 Chapter 6. System Administration To login the syst em configuration page of the NVR, click on the monitoring page and login as an administrator.[...]

  • Page 118

    118 Upon successful login, you can view the monito ring channels, the con nection and recording status, and the network bandwidth of the NVR on the ‘Advanced Mode’ page. You can also vi ew the settings by ‘ Traditional Mode’. If the NVR is has n ot been configured yet , the Quick Con figuration page will be sh own to guide you through the s[...]

  • Page 119

    119 6.1 Quick Configurati on Follow the instructions to configure the NVR. Note: All the changes will be effective only after clicking ‘Start installation’ in the last step.[...]

  • Page 120

    120 1. Enter the server name. The server name supports up to 14 characters which ma y include alphabets (A–Z and a– z), numbers (0–9), a nd dash (-). Space and period (.) are not allowed. 2. Change the administrator password or sele ct to use the default password (admin).[...]

  • Page 121

    121 3. Enter the date, ti me, and time zone of the ser ver. 4. Enter the IP address, subnet mas k, and default gateway o f the server.[...]

  • Page 122

    122 5. Select the disk configuration . All the disk data will be cleared unless you select not to set the disk configuration.[...]

  • Page 123

    123 6. Initialize th e IP camera settings. Select the camera brand and model. Enter the name and IP address of the camera, and the user name and password. You can also en able or disable the recording function on each channel, test the connection to the IP cameras and then click ‘Save’ to apply the changes. Click ‘Search’ to search for the [...]

  • Page 124

    124 Click ‘Start Inst allation’ to apply the changes and initial ize the system.[...]

  • Page 125

    125 Click ‘Start Monitoring’ to vi ew the live video fr om the IP cameras or click ‘Close’ to return to the system administrati on home page.[...]

  • Page 126

    126 6.2 System Settings You can configure the b asic system settings in cluding the server name, the date & time, and view the system settings. 6.2.1 Server Name E nter the name of the NVR. The server na me supports maximum 14 characters, which ca n be a combination of alphabets (a-z), numbers (0-9), and hyphen (-). It does not allow spaces ( )[...]

  • Page 127

    127 6.2.2 Date & Time Set the date , time, and time zone according to your location. If the settings are incorrect , the following problems may occu r: ïŹ Incorrect time display on the video files. ïŹ Incorrect time display on the event logs. Synchronize with an Internet time server aut omatically Enable this option to update the date and tim[...]

  • Page 128

    128 6.2.3 View System Settings You ca n view the system settings such as the server name on this page.[...]

  • Page 129

    129 6.3 Network Settings You can configure the WAN and LAN settings, DDNS se rvice, file service, host access control, protocol management and view the network settings in thi s section. 6.3.1 TCP/IP Configuration Select one of the follo wing options to co nfigure the TCP/IP se tting s of the NVR. ïŹ Obtain IP address settings automatically via DH[...]

  • Page 130

    130 If the NVR supports two LAN ports, you can se lect to use failover, load balancing, or standalone settings. To use these features, make sure both LAN ports are connected to the network.[...]

  • Page 131

    131 Configuration of Networ k Interfaces ïŹ Failover (Default settings fo r dual LAN NVR models) Failover refers to the capability of switching over the network transfer port to the redundant port automaticall y when the primary one fails due to hardware or connection error to avoid network disconnect ion. When the primary network port resumes the[...]

  • Page 132

    132 ïŹ Load balancing Load balancing enables the n etwork resource s to spread between two or more network interfaces to optimize the network transfer and enhance the system performance. It operates on layer 3 protocol (IP, NCP IP X) only. Mult icast/broadcast and other non-routable protocols such as NetBEUI can only be transferred vi a the main n[...]

  • Page 133

    133 ïŹ Standalone The standalone option allows you to assign di fferent IP settings fo r each network port. The NVR can be access ed by different workgr o ups on two different subnets. When load balancing is enabled, f ailover does not work. You can only enable the DHCP server for the primary network port (LA N 1).[...]

  • Page 134

    134 Network Transfer Rate You can select auto-negotiation (default), 100 0 M b p s , o r 1 0 0 M b p s . I t i s r e c o m m e n d e d t o use the default sett ing that the server w ill determine th e network speed auto matically. Obtain IP address settings automatically via DHCP If your network supports DHCP, select this option to allow the NVR to[...]

  • Page 135

    135 6.3.2 DDNS (Dynamic Domain Name) Service The DDNS service enables the users to connect to the NVR by the domain name directly. There is no need to memorize the lengthy IP address of the server. To enable the DDNS service, you have to register a DDNS accoun t from a DDNS provider. Please refer to Appendix A for details. The NVR currently support[...]

  • Page 136

    136 6.3.3 File Services Y ou can enable the SMB/C IFS file service, We b File Manager, and FTP s ervice to access the video files. These setting s are enabled by default. If the NVR is inst alled behind the rout er, you may enable FTP port mapping to allow th e users from the external network to connect to the NVR via FTP (pl ease refer to Appendix[...]

  • Page 137

    137 6.3.4 Host Access Control Specif y the connections to be allowed or denied to connect to the NVR. Choose one of the following options to restrict th e access from a network or an IP address (host) to the server: 1. Allow all connections (Default setting) Allow the connection from all the hosts to the server. 2. Allow connections from the list o[...]

  • Page 138

    138 6.3.5 Protocol Manage ment T o c o n n e c t t o t h e N V R b y a s p e c i f i c H T T P p o r t n u m b e r , e n a b l e t h e o p t i o n ‘ S p e c i f y H T T P p o r t number’ and enter the port number . The default setting is 80. RTP (Real-time Tran sfer Protocol) is a stan dard ized packet format for d elivering real-ti me audio an[...]

  • Page 139

    139 6.3.6 View Network Settings You ca n view the current networ k settings and the status of the VioStor in t his section.[...]

  • Page 140

    140 6.4 Device Configuration You can configure the SATA disk, R AID mana gement tool, USB disk, and the UPS settings in this section. 6.4.1 SATA Disk This page shows the model, size and current stat us of the hard disk drive(s) installed on the VioStor. You can format the hard disks an d view the status, and scan the bad blocks. When the hard disks[...]

  • Page 141

    141 Single Disk Volume Each hard disk dri ve is used as a standalone disk. If a disk is damaged, all the data will be lost. JBOD (Just a bunch of disks ) JBOD is a collection of hard di sk drives that does not offer any RAID protection. The data are written to the physical disks sequentially. The total storage capacity equals to the sum of the capa[...]

  • Page 142

    142 RAID 5 Disk Volume The data are striped across all the drives in a RAID 5 array. The parity information is distributed and stored across each drive. If a member drive fails, the array enters degraded mode. After installing a new drive to replace the failed one, the data can be rebuilt from other member drives that contain the pari ty informatio[...]

  • Page 143

    143 6.4.2 RAID Manage ment Tool *This function is not supported by the VS-1004L, VS-101, VS-201, NVR-104. The RAID management tool all ows you to carry out capacity expansion, RAID migration, or spare drive configuration with the origina l drive data reserved. ïŹ Expand capacity This functi on enables capacity expa nsion of a RAID confi guration b[...]

  • Page 144

    144 ïŹ Configure spare drive This function enabl es adding or removing a spare drive from a RAID 5 configuration. The options available are: - Add a spare drive to a RAID 5 configuration - Remove a spare drive from a RAID 5 configuration For detailed operation instructions, click ‘Comment’ on the management int erface.[...]

  • Page 145

    145 6.4.3 USB Disk The NVR supports data backup to the extern al USB storage devices. Connect the USB storage device to the USB port of the NVR, wh en the device is successfully detected, the details will be sh own. * The VS-101, VS-201, NVR-104 do not support FAT32 and NTFS.[...]

  • Page 146

    146 6.4.4 UPS You ca n connect a UPS (uni nterruptible po wer supply) to the NVR and enable the UPS support. When an expected po wer outage occurs, the UPS is able to supply the power to the NVR continuously. You can also configure the settings to turn off the NVR after the AC power fails. If the power of th e UPS is insufficient to last for the ti[...]

  • Page 147

    147 6.5 User Management The NVR supports secure user acce ss right ma nagement. A user can be defined as an administrator, a system manager, or a general user and given different rights of monitoring, playback, and system administration. Note: The NVR suppor ts up to 32 users (includi ng the system default users). The NVR supports 3 types of users:[...]

  • Page 148

    148 3. user The general users have onl y the rights of monitoring and video playback. They have no administration authority. Please refer to Chapter 6.5.4 for more details.[...]

  • Page 149

    149 6.5.1 Create user  User N ame The user name must be 1 to 3 2 characters in length. It supports alph abets (A-Z), numbers (0-9), and underscore (_). It is case-insensitive and su pports double-byte characters, such as Chinese, Japa nese, an d Korean but ca nnot be a pure number or contain the follo wing characters: “ / [ ] : ; | = , + * ?[...]

  • Page 150

    150 6.5.2 Edit User Select a user on the list and click ‘Edit ’. Y ou can change the password; assign the rights of system administration and camera a ccess to th e user. However, the user name cannot be changed. 6.5.3 Delete User T o delete a user, select t he user on the list and click ‘Delete’. Click ‘OK’ to confirm. Note: The system[...]

  • Page 151

    151 6.5.4 User Access Rights Comparison The VioStor NVR supports three types of user s including system ad ministrator, system manager, and general user. The default system administrators are ‘admin’ and ‘supervisor’ who cannot change one another’s password, user type, a n d access rights to the IP cameras. Note 1: The user can delete his[...]

  • Page 152

    152 administrator system mana ger user Rights admin supervisor Other administrators sysmgr Other system managers User 12. Change the camera access control of supervisor No Yes No No No No 13. Change the camera access control of other administrators No No Yes No No No 14. Create sysmgr No No No Default No No 15. Create other system manager accounts [...]

  • Page 153

    153 administrator system mana ger user Rights admin supervisor Other administrators sysmgr Other system managers User 27. Change the user type of normal users Yes Yes Yes Yes No No 28. Change the camera access control of normal users Yes Yes Yes Yes Yes No 29. System administration Yes Yes Yes Yes Yes No 30. Monitoring Yes Yes Yes No No Default 31.[...]

  • Page 154

    154 6.6 Camera Settings You can configure the IP camera, r ecording, schedule, alarm, and advanced settings. 6.6.1 Camera Configuration Please follo w the steps below to configure the IP cameras. 1. Select a camera number. 2. Select the camera brand. 3. Select the camera model. 4. Enter the camera name. 5. Enter the IP address or domain name of the[...]

  • Page 155

    155 Note: 1. All the settings w ill not take effect unt il you click ‘Apply’. When applyin g the changes, the recording operation w ill stop for a while (maximu m 1 minute) and then restart. 2. Click ‘Search’ to search for the I P cameras on the local network. Select a channel fo r the IP camera and click ‘Add’ to add the camera. By usi[...]

  • Page 156

    156 Note: The QNAP NVR only supports JPEG CGI comma nd interface, but does not guarantee the compatibility wit h all the IP camera brands.[...]

  • Page 157

    157 6.6.2 Recording Settings Select a camera on the list an d configure the recordin g resolution, frame rat e, and quality. You can also enable audio recording, manual re cording, recording data retention, and auto snapshot settings. Click ‘A pply’ to save the settings. 1. Video compression: Choose a video comp ression format for the recording[...]

  • Page 158

    158 9. Enable auto snapshot: Select this option and the settings wi ll be displayed. You can configure up to 15 schedules for automatic snapshot taking or sp ecify the number of snapshots (max 60) the NVR should take ev ery hour. The snapshots are saved to the share folder of the NVR by default. You ca n also specify a remote server to where the fi[...]

  • Page 159

    159 6.6.3 Schedule Settings You ca n select continuous recording or sche duled recording. Th e default setting is continuous recording. To set up a recording schedule, select a camera number on the list. Then select the date an d time and click ‘Add’. Click ‘Apply’ to save the settings for the particular IP camera or click ‘Apply to all c[...]

  • Page 160

    160 6.6.4 Alarm Settings The NVR provides ‘Traditional Mode’ and ‘A dvanced Mode’ for alar m settings. Select ‘Traditional Mode’ to use the standard al arm settings in response to the alarm events. To use advanced event management , select ‘Advanced Mode ’. Note: The VS-201, VS-101, NVR-104 do not support Advanced Mode in ‘Alarm S[...]

  • Page 161

    161 Note:  All the settings will be ef fective after clickin g ‘Apply’. When apply ing the changes, th e current recording process will st op for a while (maximum 1 minu te) and then rest art.  To avoid blocking by the firewall, the IP cameras or the video servers configured for alarm recording must be located on the same subnet as the NV[...]

  • Page 162

    162 Advanced Mode: The advanced mode consists of the event and action sections. You ca n define the action to take for each event triggered on the IP camera s or the video servers connected to the NVR. To configure the advanced event management by the ‘Advanced Mode’, select an event type on the left chan nel list and configure the acti ons to [...]

  • Page 163

    163 ïŹ Events: The events supported by the NVR are classified as camera events (motion detection, alarm input, camera disconnection), NVR ev ents (recording failure), and external events (user-defined events). Note: The camera events available depend on the features supported by the IP cameras or video servers. Buttons on the event list Add an ext[...]

  • Page 164

    164 The NVR supports the following ev ent types. Before you define the action settings, select the events to manage an d configur e the settings. (1) Alarm input This option allows the N VR to trigger an ac tion when the al arm input of the IP camera or the video server is triggered. Select ‘C amera event’ from the ‘Event List’. Locate the [...]

  • Page 165

    165 (2) Motion detection This option allows the NVR to trigger an action when a moving object is detecte d by the IP camera or the video server. Select ‘Camera event’ from the ‘Event List’. Locate the chann el and click ‘Motion Det e ction’. Next, click the edit bu tton ( ), enable this option, conf igure the settings, and click ‘Appl[...]

  • Page 166

    166 (4) Connection failure This option allows the NVR to tri gger an acti on when the IP camera or the video server is disconnected. Select ‘Camera Event’ from the ‘Event List’. Locate the channel and click ‘Connection Failu re’. After t hat, define the action on the right (discussed in the later sections). (5) Recording failure (NVR ev[...]

  • Page 167

    167 (6) External event (user -defined events) To create a self-defined event on the NVR, select ‘User-defi ned Event’ under ‘External event’ on the ‘Event List’. Then clic k the + button. Enter the event n ame, for example, ‘door’. After creating an event, click the event name and define the action on the right (discussed in the lat[...]

  • Page 168

    168 Event schedule settings: When you edit an event (not including camera disconnectio n, NVR events, and external events), you can click ‘Set Schedule’ to define when the alarm set tings will be active. To create a new schedule, select ‘New’ an d enter the schedule name. The schedule supports maximum 25 characters (double-by te characters,[...]

  • Page 169

    169 ïŹ Actions: The NVR supports different ac tions which can be activated when the selected events are triggered on the IP cameras or the video serv ers. The actions include video recording, email alert, SMS alert, buzz er, PTZ camera control, alar m outp ut, and logic output. Buttons on the action list Add an action: After configuring an even t [...]

  • Page 170

    170 Note: Make sure you have enabled the action i n the event settings; otherwi se the action will not be executed. For example:[...]

  • Page 171

    171 (1) Recording Select the channels (IP cameras or video servers) which will start recording when an event occurs. You may also se lect the following options: (i) Enter the time (in seconds) the recordi ng should be executed after the event is triggered. (ii) Start recording when the event starts an d stop recording when the event ends. The optio[...]

  • Page 172

    172 (2) Camera control This option allows you to conf igure the PTZ ca mera to adjust to the preset position for monitoring or act according to the HTTP UR L entered when an event is triggered. You can select a preset posi tion from the drop-down menu or enter the HTTP URL. Click ‘Select from th e list’ to select an action sett ing which has be[...]

  • Page 173

    173 (3) Alarm output Select to activate the alarm device connect ed to the IP camera when an event is triggered. You may also se lect the follow ing options: (i) Enter th e number of second(s) the alarm devic e will be active when the ev ent is triggered. (ii) Activate the alarm device when t he even t starts and stop the alarm device when the even[...]

  • Page 174

    174 (4) Email To allow the system administrator to receiv e an inst ant email aler t when an event is triggered, enter the SMTP se ttings. Multiple emai l addresses can be entered as the recipients. You may also sele ct to attach the s napshots of the multiple chann els (IP cameras/video servers) available on the NVR. Click ‘Select from th e list[...]

  • Page 175

    175 (5) SMS To allow the system administrator to receiv e an insta nt SMS aler t when an event is triggered, enter the SMS server settings . The default SMS service provider is Clickatell. To add other SMS service providers, click ‘Add’ and ent er the provider’s name and the URL template text. Click ‘Select from th e list’ to select an ac[...]

  • Page 176

    176 (6) Buzzer Enable the buzzer when an event is triggered. You ma y also select the following options: (i) Enter the time (in seconds) the buzz er will sound when the ev ent is triggered. (ii) Execute the buzzer when the event starts and s top the buzz er when the event ends. The option (ii) is applicable to th e duration even ts only. A du ratio[...]

  • Page 177

    177 (7) User-defined Acti on You can enter a self-defined action when an event is triggered. Enter the login account and password, IP address, port, and the HTTP URL of other surveillance devices. You can manage the devices su ch as fire protection devi ces, power controller, and air condi tioning control. Click ‘Select from th e list’ to selec[...]

  • Page 178

    178 6.6.5 Advanced Settings You ca n configure the advanced rec ording settings in this s ection. ïŹ Maximum period for ea ch r ecording file: Configure the maximum length of each recording file (maximum 15 min). ïŹ When the available s torage is less than
 GB: Select the action to take when the available storage is less than the preset level. [...]

  • Page 179

    179 ïŹ Pre-/Post-alarm Recordings ïź Start recording video
second(s ) before the event occurs: Enter the number of seconds to start the recording before an event occurs. ïź Stop video recording
second(s ) after the event ends: Enter the number of seconds to stop the recording after an event ends. The maximum number of seconds for the above s[...]

  • Page 180

    180 6.7 System Tools The System Tools enable you to optimize th e system maintenance and management. You can set the alert notifi cation, restart or sh ut down the server, configure the hardware settings, update the system fi rmware, back up/restore/reset the system settings, set the E-map, and run the ping test. 6.7.1 Alert Notification Enter the [...]

  • Page 181

    181 6.7.2 SMSC Settings You ca n configure the SMSC (Short message se rvice centre) settings to send the SMS te xt messages to the particular mobile phone number s when an event takes place on the NVR. The default SMS service provider is Clickat ell. You may also add your own SMS service provider by selecting ‘Add SMS Pr o vider’ from the drop-[...]

  • Page 182

    182[...]

  • Page 183

    183 6.7.3 Restart/Shut Down Fol low the steps below to restart or shut down the server. 1. Go to ‘System Tools’ > ‘Restart/Shutdown’. 2. Click ‘Restart’ to reboot the server or ‘Shut Down’ to turn off the NVR.[...]

  • Page 184

    184 6.7.4 Hardware Settings You ca n enable or di sable the hardware functions of the NVR. ïŹ Enable the configuration reset s witch By enabling this option, you can press th e reset bu tton for 5 seconds to reset the administrator password and sy stem settings to default. Note: The configuration reset sw itch is enabled by default. When this opti[...]

  • Page 185

    185 ïŹ Enable front video backup button The VioStor supports direct copy of the re cording data on the NV R to the connected USB device via the USB port. You can set the number of days that the videos are recorded to copy to the device. To use th is function, please follow the steps below: 1. Set the number of days that t he latest reco rdings sho[...]

  • Page 186

    186 ïŹ Smart fan configuration After enabling the smart fa n, the fan rota tion speed is automatically adjusted according to the system temperature of the NVR. It is recommen ded to enable this option. By manually setting the fa n rotati on speed, the fan rotates at the defi ned speed continuously. *This function is no t supported by the VS-101, V[...]

  • Page 187

    187 6.7.5 Syste m Upd ate QNAP provi des new firmware release for the VioStor NVR from time to ti me to provide updated features and enha ncements. You may update the system firmware in order to use these new features. Before updating th e system firmware, make sure the product model and the firmware version are correct. Follow the steps below to u[...]

  • Page 188

    188 6.7.6 Backup/Restore/Reset Settings ïŹ To back up all the settings, including th e user accounts, the server name and the network configu ration, click ‘Backu p’ and select to open or save the setting f ile. ïŹ To restore all the settings, click ‘Browse’ to select a previously saved setting file and click ‘Restore’. ïŹ To reset a[...]

  • Page 189

    189 6.7.7 Remote Replication You ca n use the remote repli cation feature to co py the recording data of the local VioStor to a remote QNAP network attached storage (NAS). The remote QNAP NAS is hereafter referred to as ‘the re mote storage device’. Note: Before using this function, ma ke sure the Microsoft networ king service of the remote sto[...]

  • Page 190

    190 2. Enable remote replication (support multiple choices) In the above example, the NVR on ly copies the alarm recording data of the latest 3 days to the remote storage device. ïŹ Select ‘Enable remote replication ’ to ac tivate this feature. The NVR executes automatic backup of the recording data to the remote storage devi ce according to t[...]

  • Page 191

    191 4. Configure the remote replication schedul e For example, to enable the NVR to copy the recording data automati cally to the remote storage device at 01:15 every Monday, please do the following: Select ‘Replication Schedule’, select ‘Weekly’, enter 01 Hour: 15 minute, and select ‘Monday’. 5. Select the backup options (a) Select ‘[...]

  • Page 192

    192 10. The NVR displays the latest 10 remote replication records. In the above example: 1. When the status is shown as ‘Failed (Remote access error)’: You may check if the remote storage device is running or the network settings are correct. 2. When the status is sh own as ‘Failed (An in ternal error occurred)’: You may view the hard drive[...]

  • Page 193

    193 6.7.8 Hard Disk SMART This function is no t supporte d by the VS-101, VS-201, NVR-104. This page enables you to monitor the health, temperature, and sta tus of the hard disk drives by the S.M.A.R.T . (Self-Monitoring, Anal ysis, and Reporting Technol ogy). Select a hard disk drive to view th e following information by clicking the corresponding[...]

  • Page 194

    194 6.7.9 E-map Y ou can upload an E-map to the VioSt or to illustrate th e location of the IP cameras. 1. To upload an E-map, cli ck ‘Browse’ and select th e file (JPEG only ). Then click ‘Upload’. 2. You can change the caption of the E-map and click ‘Apply’. 3. After uploading the E- map, click ‘Test’ to view t he map. 6.7.10 Ping[...]

  • Page 195

    195 6.7.11 Advanced System Settings You can set the ti meout period to log off the users from th e configuration page of the NVR when the idling time has reach ed. To allow guest access to the mo nitoring screen of the NVR by local display, select ‘Allow guest access’. Note: The timeout logoff does not apply to th e monitori ng, playback, advan[...]

  • Page 196

    196 6.8 Logs & Statistics 6.8.1 System Event Logs The NVR can save maximum 10,000 recent ev en t logs, including w arning, error, and information messages. In case of system malf unction, t he event logs (o nly in English) can be retrieved to analyse the s ystem problems. Click ‘Save’ to save the logs as a CSV file.[...]

  • Page 197

    197 6.8.2 Surveillance Logs T his page shows the surv eillance logs such as camera connection, motion detection, and camera authentication failure.[...]

  • Page 198

    198 6.8.3 On-line Users List T his page shows th e information of the current ly active users, e.g. the user name, IP address, and login time. 6.8.4 Historical Users List T his page shows the information of the users who have logged in th e system including the user name, IP address, login time, and the ser vices they have accessed etc.[...]

  • Page 199

    199 6.8.5 System Connection Logs The co nnection logs to the NVR by samba, FT P, AFP, HTTP, HTTPS, Telnet, and SSH are recorded on this page. You can select to st art or stop the logging. The file tran sfer performance may be sligh tly affected by enabling the event logging. 6.8.6 System Infor mation T his page shows the syst em information, su ch [...]

  • Page 200

    200 Chapter 7. System Maintenance This section provides a general overview of the system maint enance. 7.1 Reset the Administrator Password and Network Settings To reset the administrator password and the netw ork settings, press the reset button of t he server for five seconds. A beep sound will be h eard. After resetting the system, you ca n logi[...]

  • Page 201

    201 7.2 Power Outage or Abnormal Shutdown In case of power outage or improper shutdown of the server, the server w ill resume to the state before it is shut d own. If your server does not function properly after the restart, please do the following: 1. If the system configuratio n were lost, configure the s ystem again. 2. If the problem persists, [...]

  • Page 202

    202 Chapter 8. LCD Panel * This section is applicable to t he NVR models with an LCD panel on ly. The NVR provides a ha ndy LCD panel for you to perform the disk configuration an d view the system information. When the NVR has started up, yo u will be able to view the server name and the IP address: N V R 5 F 4 D E 3 1 6 9 . 2 5 4 . 1 0 0 . 1 0 0 F[...]

  • Page 203

    203 For example, when you turn on the NVR with 5 hard drives in stalled, the LCD panel shows: C o n f i g . D i s k s ?  R A I D 5 You can press the ‘Select’ button to browse more options, e.g. RAID 6. Press the ‘Enter’ button and the following mess age shows. Pr ess the ‘Select’ button to select ‘Yes’ to confirm. C h o o s e R A[...]

  • Page 204

    204 View the system information by the LCD panel When the LCD panel shows the server name an d the IP address, you may press the ‘Enter’ button to enter the Mai n Menu. The Main Menu consists of the foll owing items: 1. TCP/IP 2. Physical disk 3. Volume 4. System 5. Shut down 6. Reboot 7. Password 8. Back 1. TCP/IP In TCP/IP, you can view the f[...]

  • Page 205

    205 2. Physical disk In Physical disk, yo u can view the fo llowing options: 2.1 Disk Info 2.2 Back to Main Menu The disk info shows the temperature and the capacity of the hard disk drive. D i s k : 1 T e m p : 5 0 ° C S i z e : 2 3 2 G B 3. Volume This section shows the disk configuration of the NVR. T he first line shows t he RAID configuration[...]

  • Page 206

    206 4. System This section shows the system temperature an d the rotation speed of the system fan. C P U T e m p : 5 0 ° C S y s T e m p : 5 5 ° C S y s F a n : 8 6 5 R P M 5. Shut down Use this option to turn off t he NVR. Press the ‘Select’ button to select ‘Yes’. Then press the ‘Enter’ button to confirm. 6. Reboot Use this option t[...]

  • Page 207

    207 System Messages When the NVR encounters system error, an error message will be shown on t he LCD panel. Press the ‘Enter’ button to view the message. Press the ‘Enter’ button again to view the next message. S y s t e m E r r o r ! P l s . C h e c k L o g s System Message Description Sys. Fan Failed The system fan fails Sys. Overheat The[...]

  • Page 208

    208 Chapter 9. Troubleshooting 1. The monitoring screen did not display. Please check the following: A. Check if you have installed th e ActiveX add-on when loggin g in the monitoring page of the VioStor. Set the securi ty level to ‘Medium’ or lower i n Internet Options of the IE browser. B. The VioStor is turned on and the network is correctly[...]

  • Page 209

    209 3. The recording is not working properly. A. Make sure each hard disk tray is correctly locked on the VioStor. B. When on ly one hard disk drive is inst alled, make sure the HDD is in stalled in th e tray of HDD 1. The HDD 1 should be installed on top of the HDD 2. C. C heck if the recording fu nction is enabled on the C amera Configuration pag[...]

  • Page 210

    210 7. The estimated storage space for recording dis played on the ‘Recording Settings’ page is different fr om the actual value. This estimated value is a ref erence value only. The actual disk space may vary according to the image contents, the netw ork environment, and the performance of the IP cameras. 8. The monitoring screen shows horizon[...]

  • Page 211

    211 14. The VioStor takes too long to restart. When the VioStor takes more than 5 minutes to restart, turn off th e power and turn on the server again. If the problem persis ts, please contact th e technical support.[...]

  • Page 212

    212 Appendix A Dynamic Domain Name Registration The VioStor supports the DDNS service provided by Dyn DNS. You can go to the DynD NS website http://www.d yndns.org/ to register a dynamic domain name. Configure and activate the DDNS service to en able the Internet users to connect to the VioStor by this dynamic domain name. When the IS P assigns a n[...]

  • Page 213

    213 Registration Proc edure Please follow the steps bel ow to register a dynamic domain name. This guide is for reference only. If there are an y changes, please refer to the instructions or the docu ments on the web site. 1. Open the web browser and connect to http://www.dynd ns.com/ . Click ‘Create Account’ to begin the registration.[...]

  • Page 214

    214 2. Enter the information required to register the account. 3. Accept the terms of service.[...]

  • Page 215

    215 4. Configure the mailin g lists if necessary. Then click ‘Create Accou nt’. 5. When your account has been succe ssfully create d, a confirmation email will be sen t to you. F ollow the inst ructions in the email t o activate your account . When you have finished the confirmation process, you ca n apply for your own dynamic domain name. Plea[...]

  • Page 216

    216 Appendix B Configuration Examples Environment 1: The VioStor, th e IP camera, and the moni toring PC are all on the same network IP address VioStor 192.168.1.1 PC 192.168.1.100 Camera 1 192.168.1.101 Camera 2 192.168.1.102 Camera 3 192.168.1.103 In the example, add the IP came ras to the VioStor by entering the I P addresses of the IP cameras.[...]

  • Page 217

    217 Environment 2: The Vi oStor and the IP camera are installed behind the router, while t he monitoring PC is located remotely IP address Mapped port on the r outer VioStor 192.168.1.1 8000 Camera 1 192.168.1.101 8001 Camera 2 192.168.1.102 8002 Camera 3 192.168.1.103 8003 Router public IP 219.87.144.205 PC 10.8.10.100[...]

  • Page 218

    218 To allow a remote PC to conn ect to the VioStor and the IP cameras, you need to: Step 1. Set up the port mapping (virtual server) on the router. From Forward to 219.87.144.205:8000 192.168.1.1:80 219.87.144.205:8001 192.168.1.101:80 219.87.144.205:8002 192.168.1.102:80 219.87.144.205:8003 192.168.1.103:80 Step 2. Add the IP camera to the VioSto[...]

  • Page 219

    219 Environment 3: The Vi oStor and the IP camera are all located remotely IP address VioStor 219.87.144.205 Camera 1 61.62.100.101 Camera 2 61.62.100.102 Camera 3 61.62.100.103 In this example, add the IP camera to the VioStor by add ing its IP address to the ‘IP Address’ settings. Note: If a particular port i s assigned to connect to the I P [...]

  • Page 220

    220 Environment 4: The Vi oStor and the IP ca mera are installed behind the router IP address VioStor 1 192.168.1.101 VioStor 2 192.168.1.102 VioStor 3 192.168.1.103 Router public IP 219.87.145.205 In the example, to all ow a remote PC to connect to each VioStor by FTP, you need to: Step 1. Set up the port mapping (virtual server) on the router Fro[...]

  • Page 221

    221 Technical Support QNAP provides dedicated online support and cu stomer ser vice via instant messenger. You can contact us by the fo llowing means: Online Support: htt p://www.qn apsecurity.com/ onlinesupport. asp MSN: q.support@hotmail .com Skype: qnapskype Technical Support in the USA and Canada: Email: q_supportus@qnap.com TEL: 909-595-2819 A[...]

  • Page 222

    222 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright © 2007 Free Software Foundat ion, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, cop yl eft license for software and other kinds o f[...]

  • Page 223

    223 distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both user s' and authors' sake, the GPL requires that modified versions be marked as ch anged, so t hat their problems will not be attri buted erroneously to authors of prev[...]

  • Page 224

    224 A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liab le for infrin gement under applicable copyrigh t law, except executing it on a compu ter or modifying a privat e copy. Propagation i[...]

  • Page 225

    225 needed to generate, install, an d (for an executabl e work) run the object code and to modify the work, includi ng scripts to control those activiti es. However, it does not inclu de the work's System Libraries, or general-purpos e tools or generally available free programs which are used unmodified in perf orming those ac tivities but whi[...]

  • Page 226

    226 measures. When you convey a covered w ork, you waive any legal power to forbid circumvention of technological measures to the exte nt such circ umventi on is effected by exerci sing rights under this License with r espect to the covered work, and yo u disclaim any intention to l imit operation or modification of the work as a me ans of enforcin[...]

  • Page 227

    227 by their nature exte nsions of the covered work, and whi ch are not combined wi th it such as to form a larger program, in or on a vol ume of a storage o r distribu tion medium, is called an “aggregate” if th e compilation and its resu lting copyright are not used to lim it the access or legal rights of th e compilation's us ers beyond[...]

  • Page 228

    228 A separable portion of the object code, wh ose source code is excluded from the Corresponding Source as a Syst em Library, need not be incl uded in conveying the object code work. A “User Product” is either (1) a “consumer product”, whi ch means any tangible personal property which is normally us ed for person al, family, or household p[...]

  • Page 229

    229 Corresponding Source con veyed, and Installati on Information provided, in accord with this section must be in a f ormat that is publicly docu mented (and with an implemen tation available to the public in source code f orm), and must require no special passwor d or key for unpacking, reading or copying. 7. Additional Terms. “Additional permi[...]

  • Page 230

    230 licensors and authors. All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, con tains a notice stating th at it is governed by this License along with a te rm that is a further restriction, you may remove that term. If a licens[...]

  • Page 231

    231 9. Acceptance Not Required for Having Copies. You are not required to accept this License in or der to receive or run a copy of the Program. Ancillary propagation of a cov ered work occurring solely as a consequence of using peer-to-peer transmission to receive a co py likewise does not require acceptance. However, nothin g other than th is Lic[...]

  • Page 232

    232 modification of the contributor version. For pu rposes of this definiti on, “control” includes the right to grant pate nt sublicenses in a manner consisten t with the requirements of this License. Each contributor grants you a no n-exclusive, worldwide, royalty-free patent license under the contributor's essential pate nt claims, to ma[...]

  • Page 233

    233 connection with copies of the covered work co nveyed by you (or copies made from those copies), or (b) primarily for a nd in connection with specific products or compilations th at contain the covered work, unless you entered into that arrangement, or tha t patent li cense was granted, prior to 28 March 20 07. Nothing in this Licens e shall be [...]

  • Page 234

    234 If the Program specifies that a pro xy can deci de which future versio ns of the GNU General Public License can be used, that proxy's pu blic statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional[...]

  • Page 235

    235[...]