Planar Planar PR Line PR5022 manual

PR5022[...]

Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support 24/7 Technical Support – i –[...]

User’s Manual Copyright This publication, including all photographs, illustratio n s and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright June, 2007 Disclaimer The information [...]

Preface Important Safety Information Congratulation s on purchas ing the Planar DLP ® projector! Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector. Keep this manual for future reference. Sy[...]

DLP ® Projector – User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord wher e it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control when storing o r not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be ha[...]

Preface Main Features • Lightweight unit, easy to pack away and transport • Compatible with all major video st andards includin g NTSC, P AL, and SECAM • A high brightness rating allows for presentations in da ylight or in lit rooms • Supports re solutions up to SXGA+ at 16.7 million colors to deliver cri sp, clear images • Flexible setup[...]

DLP ® Projector – User’s Manual Table of contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST .....................................................................................................[...]

Preface T IMING M ODE T ABLE ........................................................................................................................................................ 44 P ROJECTOR D IMENSIONS ..............................................................................................................................................[...]

– 1 – Getting Started Packing Checklist Carefully unpack the projector and check that the following items are included: DLP® projec tor Remote c ontrol (with two AAA batteri es) Power cord USB cable (USB type A- to-B USB) Composite vi deo cabl e (RCA 3-to-RCA 3) Computer cable (VGA-V GA) Audio cable (mini jack-to-mini jack) CD-ROM (This User?[...]

DLP ® Projector – User’s Manual Views of Projector Parts Front-right View Item Label Description See page: 1. Focus Focuses the projected image 18 2. Lens zoom Enlarges the projected image 18 3. Screws Holds lamp to projector 4. See “Top view—OSD buttons and LEDs” 3 5. Front IR receiver Receiver for IR signal from remote control 7 6. Len[...]

DLP ® Projector – User’s Manual Item Label Description See page: 8. Height-adjuster but- ton Push to release height adjuster 17 Important: Ventilation openings on the projector allow for good air circulation, whic h keeps the proje c tor lamp cool. Do not obstruct any of the ventilation openings. Top view—On-screen Displa y (OSD) buttons and[...]

DLP ® Projector – User’s Manual Item Label Description See page: 6. Enter Changes settings in the OSD 20 7. VOL+/ Right cursor Increases volume Navigates and changes settings in the OSD 20 8. Auto Optimizes image size, position, and resolution Navigates and changes settings in the OSD 9. Menu Opens and exits the OSD 10. Source Detects the inpu[...]

DLP ® Projector – User’s Manual Rear view Item Label Description See page: 1. Rear IR receiver Receiver for IR signal from remote control 7 2. DVI-D Connect a DVI-D cable (not supplied) from a com- puter 3. VGA IN Connect a VGA cable (supplied) from a computer 4. VGA OUT Connect to a monitor (not supplied) 5. S-video Connect the S-video cable [...]

DLP ® Projector – User’s Manual Note: If your video equipment has both S-video and RCA jacks (composite video) connect to the S-video connector. S-video provides a better quality signal. Bottom view Item Label Description See page: 1. Ceiling support holes Contact your dealer for information on mount- ing the projector on a ceiling. 2. Height [...]

DLP ® Projector – User’s Manual – 7 – Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting tur ned on. Certain high-frequency fluores- cent lights can disrupt re mote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote[...]

DLP ® Projector – User’s Manual – 8 – Item Label Description See page: 8. Right cursor 9. Down cursor 10. Volume +/- Adjusts volume 20 11. Mute Mutes the built-in speaker 18 12. Zoom+ Zoom in 13. Zoom- Zoom out 14. Freeze Freeze/unfreezes the on-screen picture 15. Blank Makes the screen blank 16. Source Detects the input device 17. Auto Au[...]

DLP ® Projector – User’s Manual – 9 – Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you ar e not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well with[...]

– 10 – Setup and Operation Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the di- rection of the arrow. 2. Insert the supplied batteries taking note of the polarity (+/-) as shown here. 3. Replace the cover. Caution: 1. Only use AAA batteries. (Alkaline is better) 2. Dispose of used batter[...]

DLP ® Projector – User’s Manual Connecting Input Devices A PC or notebook computer as well as video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS play ers, as well as movie camcorders and digital still cameras. Check the user manual of the connec ting device to confirm it has the appropriat[...]

DLP ® Projector – User’s Manual Item Label Description USB Connect the supplied USB cable ( su p pl i ed ) from a computer for USB mouse function and firmware upgrades. RS-232 Reserved for installation control. Warning: As a safety precaution, disconnect all power to the projector and connecti ng devices before making connections. – 12 –[...]

DLP ® Projector – User’s Manual – 13 – Starting and Shutting down t he Project or 1. Slide the lens cover. 2. Connect the power cord to the projector [A] Connect the other end to a wall out- let. Switch [B] from off (O) to on ( — ) 3. The POWER and READY LEDs on the projector turn on. Turn on the connected devices. 4. Ensure the Ready LE[...]

DLP ® Projector – User’s Manual 7. When the “Power Off?/Press Power again” message appears, press the Power button. The projector turns off. 8. Turn off the main Power switch when the Ready LED stops flashing. Caution: Do not unplug the power cord until the Ready LED st ops flashing, indicating the projector has cooled down. – 14 –[...]

DLP ® Projector – User’s Manual Setting an Access Password (Security L ock) You can use the cursor (arrow) buttons to set a password and prev ent unauthorized use of the pro- jector. When enabled, the password must be ent ered after you power on the projector. (See “Navigating the OSD” on page 20 and “Setting t he OSD Language” on page[...]

DLP ® Projector – User’s Manual Every time you start the projector, a password dialog box appears. Enter the password in the order you set it at step 6. (Press the Menu button to cancel if you enter the wrong password.) – 16 –[...]

DLP ® Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or st and should be level and sturdy . • Position the projector so that it is perpendicular to the screen . • Be sure cables are not in the way or can cause the projector to be knocked over . 1. To[...]

DLP ® Projector – User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size. B 2. Use the Image-focus control (on the projector only) to sharpen the projected image A . 3. Press the Keystone button on the remote control. The keystone control appear[...]

DLP ® Projector – User’s Manual 3. Press the Mute button to turn off the volume. (For remote only) – 19 –[...]

DLP ® Projector – User’s Manual On-Screen Display (OSD) Menu Settings OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following [...]

DLP ® Projector – User’s Manual Setting the OSD Language You may want to reference the OSD on your projec tor while reading this section. Set the OSD lan- guage to your preference before continui ng. (The default language is English.) 1. Press the Menu button. The Main menu appears. 2. Press the cursor button until Tool is highlighted. 3. Pres[...]

DLP ® Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. – 22 –[...]

DLP ® Projector – User’s Manual Main Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Main menu. Press the cursor button to move up and down in the Main menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Brightness Press the cursor butto[...]

DLP ® Projector – User’s Manual Item Description Default Color Space Press the cursor button to adjust the color space. (Range: Auto – RGB – YPbPr- YCbCr) Auto Reset Resets all Main settings to default values — Main Menu Functions Available for Connected Source Function RGB DVI Component Video Composite Video S-video Brightness x x x x x[...]

DLP ® Projector – User’s Manual Setup Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup menu. Press the cursor button to move up and down in the Setup menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Horizontal Position Press the [...]

DLP ® Projector – User’s Manual Function RGB DVI Component Video Composite Video S-video Reset x x x x x x = available to video source Advance Feature Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move up and down in the Advance Feature [...]

DLP ® Projector – User’s Manual Item Description Default Fan Speed Press the cursor button to toggle between normal and high fan speed Set Fan Speed to High in altitudes over 1500 meters (5000 feet). Normal Security Lock Press the cursor button to enable or disable Security Lock. When you enable Security Lock a Register Password dialog box app[...]

DLP ® Projector – User’s Manual User Color Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for settings, and then pre[...]

DLP ® Projector – User’s Manual Config Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Config menu. Press the cursor button to move up and down in the Config menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Blank Screen Press the cur[...]

DLP ® Projector – User’s Manual Utility Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Utility menu. Press the cursor button to move up and down in the Utility menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Video Type Press the cu[...]

DLP ® Projector – User’s Manual Item Description Default Digital Zoom Digital operation for zoo m and pan adjustment. Press Enter or . The Zoom menu appears. Press to zoom in; press to zoom out. Press Enter or to open the Pan menu. (You must zoom in be- fore you can open the Pan menu.) Use the cursor buttons to pan the zoomed image. Press the [...]

DLP ® Projector – User’s Manual Tool Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Tool menu. Press the cursor button to move up and down in the Tool menu. Press Enter or to con- firm the new setting. Item Description Default Language Press the cursor to select the desired lan- guage English Remote co[...]

DLP ® Projector – User’s Manual Status Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and down in the Status menu. Item Description Default Video Information Displays the resolution and refresh rate for RGB/DVI mode. Displays the color standard for video [...]

– 34 – Maintenance and Security Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer. Important: 1. The lamp contains a certain am ount of mercury and should be dispos ed of according to local ordi- nance [...]

DLP ® Projector – User’s Manual 2. Open the lamp com- partment cover ( B ). B 3. Remove the two screws from the lamp module ( C ). 4. Lift the module handle up ( D ). – 35 –[...]

DLP ® Projector – User’s Manual 5. Pull firmly on the module handle to re- move the lamp module ( D ) D 6. Reverse steps 1 to 5 to install the new lamp module. – 36 –[...]

DLP ® Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the Menu button to open the Main menu. 2. Press the cursor button to move to the Status menu. 3. Press the cursor button to move down to Lamp Hour Reset . 4. Press the cursor or Enter but[...]

DLP ® Projector – User’s Manual 1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.) 2. Lightly wipe the lens in a circular motion. Caution: 1. Do not use abrasive cleaners or solvents. 2. To prevent discoloration or fading, avoid getting cleaner on the projector case. Cleaning the Case R[...]

– 39 – Troubleshooting Common problems and solut i ons These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection. Check the fol[...]

DLP ® Projector – User’s Manual LED Error Messages Error code message Pow er LED/flashes Ready LED/flashes Lamp usage task created error 2 1 Environment usage task created error 2 2 Thermal break status error 3 0 T1 temperature over temperature 3 1 T1 sensor status fail 4 1 Lamp lit error 5 1 Ballast SCI error 5 2 Ballast UART error 5 3 Fan1 e[...]

DLP ® Projector – User’s Manual 2. To ensure the problem is not caused by a connected PC’ s video card, connect to a nother computer. Problem: The image is flat with no contrast Adjust the Contrast setting on the Main menu of the OSD. Problem: The color of the projected image does not match the source image. Adjust the Color Temperature and [...]

– 42 – Specifications Input/output connectors DVI-D Data in RGB HD-15 Data out RGB HD-15 Composite video (RCAx1) Video S-video Stereo RCAx2 (L+R) Audio in Stereo Mini-jack Audio out Stereo Mini-jack RS-232 Control USB Security Kensington lock[...]

DLP ® Projector – User’s Manual Projection Distance V.S. Projection Size A B C D L Projection Distance Projection distance and size table Max. Screen Size (Wide) 1.8 Max. Screen Siz e (Tele) 2.1 Projection Distance L Diagonal Width A Height C Diagonal Width B Height D 1.00 m 0.69 m 0.56 m 0.42 m 0.60 m 0.48 m 0.36 m 3.28 ' 27.34 '&ap[...]

DLP ® Projector – User’s Manual 10.00 m 6.94 m 5.56 m 4.17 m 5.95 m 4.76 m 3.57 m 32.80 ' 273.40 '' 218.72 '' 164.04 '' 234.35 '' 187.48 '' 140.61 '' Shaded rows are equivalent me as urement in feet and inches Timing Mode Table The projector can display several resolutions. The f[...]

DLP ® Projector – User’s Manual The native resolution is 1024 x 768. Resolution other than native mode may be displaye d with uneven size of text or lines. UXGA resolution with half-sampling Projector Dimensions 300 mm(1 1.8") 96 mm(3.8") 244 mm(9.6") – 45 –[...]

– 46 – Regulatory Compliance FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commercial environment. This equipment gen[...]

Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support 24/7 Technical Support © 2007 Planar Systems, Inc. Planar is a r egistered[...]