English dropdown-ico

Pelco C2904M-B manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Pelco C2904M-B, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Pelco C2904M-B one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Pelco C2904M-B. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Pelco C2904M-B should contain:
- informations concerning technical data of Pelco C2904M-B
- name of the manufacturer and a year of construction of the Pelco C2904M-B item
- rules of operation, control and maintenance of the Pelco C2904M-B item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Pelco C2904M-B alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Pelco C2904M-B, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Pelco service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Pelco C2904M-B.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Pelco C2904M-B item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    PelcoNet ™ Multimedia T ransmission V ia Networks C2904M-B (2/05) ® INST ALLA TION/OPERA TION NET4001A[...]

  • Page 2

    [...]

  • Page 3

    C2904M-B (2/05) 3 CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 7 REGULA TORY NOTICES ........................................................................................[...]

  • Page 4

    4 C2904M-B (2/05) WEB BROWSER CONTROL P AGES ...................................................................................................... .............................................................................. 50 ACCESSING THESE P AGES .................................................................................................[...]

  • Page 5

    C2904M-B (2/05) 5 LIST OF ILLUSTRA TIONS Figure Page 1 Front Panel LEDs .............................................................................................................. ................................................................................ 12 2 Rear Panel Connectors ...........................................................[...]

  • Page 6

    6 C2904M-B (2/05) LIST OF TABLES Section Page A General Settings .............................................................................................................. ................................................................................ 35 B Configuration Page for MPEG 1/-2 Video Encoder Settings ................................[...]

  • Page 7

    C2904M-B (2/05) 7 IMPORT ANT SAFEGUARDS AND W ARNINGS Observe the following W ARNINGS before installing and using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. In[...]

  • Page 8

    8 C2904M-B (2/05) REGULA TORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequ[...]

  • Page 9

    C2904M-B (2/05) 9 WHA T IS THE PELCONET NET4001A TRANSMISSION SYSTEM? The PelcoNet NET4001A transmission system is technology that lets you view video in real time across a LAN (local area network) and even W ANs (wide area networks). This technology is based on the TCP/IP protocol suite and Ethernet technology , providing compat ibility with today[...]

  • Page 10

    10 C2904M-B (2/05) INSTRUCTIONS FOR THE NETWORK ADMINISTRA TOR The PelcoNet™ NET4001A multimedia transmission system allows live video transmission to be viewed over TCP/IP-based networks. This section is intended to help the network administrator know what is involved with installing this product and how it will affect the network. The person in[...]

  • Page 11

    C2904M-B (2/05) 11 OVERVIEW NOTE: This manual refers to the PelcoNet NET4001A transmission system when discussing features, functions, or specifications that apply to the transmitter/receiver . “Receiver ,” as used in this manual, refers to the PelcoNet NET4001A unless otherwise noted. DESCRIPTION The PelcoNet NET4001A T ransmission System is a[...]

  • Page 12

    12 C2904M-B (2/05) FRONT P ANEL LEDS Video In Video Out Audio In 10/100 Base-T 100-250VAC50/60Hz 100mA COM2: RS232       Ethernet Audio Out Power  COM1: RS232/485  Key: 1= IR (infrared) diode for future development. 2= HDD LED. Not currently used. 3= VIDEO LED lights green if a video signal is present on the input. 4= IN LED[...]

  • Page 13

    C2904M-B (2/05) 13 PIN ASSIGNMENTS Pin COM1 COM2 RS-232 RS-232/485 RS-232 1 DCD – – (data carrier detect) 2 RxD RxD+ RxD (receive data) (receive data plus) (receive data) 3 TxD TxD- TxD (transmit data) (transmit data minus) (transmit data) 4 DTR – – (data terminal ready) 5 GND (ground) GND (ground) GND (ground) 6 DSR – – (data set ready[...]

  • Page 14

    14 C2904M-B (2/05) TYPICAL APPLICA TIONS DISPLA YING REMOTE VIDEO ON A WEB BROWSER The NET4001A uses MPEG-2 and MPEG-4 for transmitting audio and video across the network. This enables transmission to standard web browsers of either live video (Live Video mode) or a stream of still images (Server Push mode). •T o activate the Live Video feature, [...]

  • Page 15

    C2904M-B (2/05) 15 Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER RECEIVER LAN/W AN TCP/IP INTRANET/INTERNET CAMERA MONITOR DISPLA YING VIDEO VIA A[...]

  • Page 16

    16 C2904M-B (2/05) DIAGRAMS OF TYPICAL APPLICA TIONS V ideo In V ideo Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 V ideo In V ideo Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 AUDIO TRANSMITTER SERVER HUB D ATA AUDIO (PRE-AMP) DA T[...]

  • Page 17

    C2904M-B (2/05) 17 Figure 7. LAN Browser-To-Box Connection (Transmitter, Browser, Fixed Camera) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER SERVER HUB BROWSER CAMERA Figure 8. LAN Browser-To-Box Connection (Transmitter, Browser, Spectra) Vi deo In Video Out Audi[...]

  • Page 18

    18 C2904M-B (2/05) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER SERVER HUB BROWSER SPECTRA VIDEO D ATA GENEX Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Powe r 100-250VA C50/60Hz 100mA COM2: RS232 Video In Video Out Au dio Out Aud[...]

  • Page 19

    C2904M-B (2/05) 19 Figure 11. WAN Box-To-Box Connection (Transmitter, Receiver, Spectra) Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Powe r 100-250VA C50/60Hz 100mA COM2: RS232 Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Powe r 100-250VA C50/60Hz 100mA COM2: RS232 TRANSMITTER AUDIO D[...]

  • Page 20

    20 C2904M-B (2/05) Figure 13. WAN Browser-To-Box Connection (Transmitter, Browser, Fixed Camera) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER BROWSER CAMERA VIDEO VIDEO CLOVIS SERVER HUB ROUTER 1 OR MORE PCs NEW YORK SERVER HUB ROUTER 1 OR MORE PCs ..............[...]

  • Page 21

    C2904M-B (2/05) 21 Figure 15. WAN Browser-To-Box Connection (Transmitter, Browser, Spectra, Genex) Vi deo In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 TRANSMITTER CLOVIS SERVER HUB ROUTER 1 OR MORE PCs NEW YORK SERVER HUB ROUTER 1 OR MORE PCs BROWSER SPECTRA VIDEO D ATA GENEX .....[...]

  • Page 22

    22 C2904M-B (2/05) HARDWARE INST ALLA TION Refer to Appendix A – Connecting PelcoNet NET4001A T o Different Components for diagrams that show various connections. RACK MOUNTING If desired, rack mount one or two NET4001A units on a single shelf of a standard 19-inch equipment rack using the supplied rack mount kit. MOUNTING A SINGLE UNIT Figure 16[...]

  • Page 23

    C2904M-B (2/05) 23 MOUNTING TWO UNITS Figure 17. Mounting Two Units Refer to Figure 17. Use the two short angle brackets and two rails from the mounting kit. The two units must first be bolted together . Do the following: 1. T urn the two units upside down. Lay them alongside each other and secure the two rails to the units using four supplied chro[...]

  • Page 24

    24 C2904M-B (2/05) CONNECTING VIDEO SOURCES OR DISPLA YS Figure 18. Connecting Camera or Monitor Refer to Figure 18. T o connect a camera, plug a standard coaxial cable into the Video In BNC connector on the rear of the NET4001A and the other end into the camera. Y ou can use any video source (for example, a VCR) with a composite P AL or NTSC outpu[...]

  • Page 25

    C2904M-B (2/05) 25 CONNECTING DA T A TERMINALS The bi-directional data interface ports can be used as control ports for equipment connected to the NET4001A (for example, a dome camera with motorized lens). USE AS CONTROL TERMINAL PORT For local control and configuration of the unit, you can connect the COM port of a data terminal (for example, a PC[...]

  • Page 26

    26 C2904M-B (2/05) CONNECTING EXTERNAL SENSORS Figure 21. Connecting External Sensors and Peripheral Devices The unit has an alarm input that lets you connect an external signaling device, like a door contact or motion detector . If conf igured accordingly , an alarm trigger can, for example, set up an automatic connection between NET4001A and the [...]

  • Page 27

    C2904M-B (2/05) 27 Figure 22. Connecting to the LAN Port Refer to Figure 22. T o connect a 10/100 BASE-T network, plug a standard UTP/Cat5 cable with RJ-45 connectors into the receptacle labeled Ethernet on the NET4001A. Y ou can connect directly to the Ethernet network. The green ETHERNET LED on the front of the unit (refer to Figure 1) lights as [...]

  • Page 28

    28 C2904M-B (2/05) CONFIGURA TION There are three ways to configure your system: • The most basic configuration is accomplished by connecting a terminal to the RS-232 terminal port. Y ou then type in commands and parameters. Refer to the Configuration Using a T erminal Program section. • Another way is to use the T elnet command and IP address [...]

  • Page 29

    C2904M-B (2/05) 29 TERMINAL PROGRAM MENU STRUCTURE The following describes the terminal program menu structure. Main Menu ‘0’ Main Menu ‘1’ IP ‘2’ MPEG-2 encoder ‘3’ MPEG-4 encoder ‘4’ Misc ‘5’ Rcp+ ‘6’ logout 1 – IP Menu The selections and format are shown below . Enter the appropriate information where indicated by t[...]

  • Page 30

    30 C2904M-B (2/05) 4 – Misc Menu ‘0’ Exit Misc configuration ‘1’ mac address (lists PelcoNet unit’ s MAC address) ‘2’ video out 2 [1=P AL, 2=NTSC] -> ‘set the video out’ [Enter] ‘3’ change username login, enter username -> ‘new username’ [Enter] ‘4’ passwords (access password menu) ‘5’ test (access test men[...]

  • Page 31

    C2904M-B (2/05) 31 CONFIGURA TION USING A WEB BROWSER In addition to the aforementioned configuration using a terminal program, which only covers the most basic settings, a web browser is the tool of choice for a more complete configuration. T o accomplish this, the system features a complete HTTP server . Microsoft Internet Explorer 5.5 or higher [...]

  • Page 32

    32 C2904M-B (2/05) VIDEO ENCODER MPEG2 CAMERA PRESET P ARAMETER MPEG-2 ENCODING VIDEO ON LIVE P AGE GENERAL UNIT NAME UNIT ID P ASSWORD LEVEL P ASSWORD P ASSWORD CONFIRM DA TE FORMA T UNIT DA TE UNIT TIME TIME ZONE TIME SERVER IP ADDRESS HARDWARE VERSION SOFTWARE VERSION SOFTWARE UPLOAD UPLOAD PROGRESS CONFIGURA TION DOWNLOAD CONFIGURA TION UPLOAD [...]

  • Page 33

    C2904M-B (2/05) 33 PELCONET NET4001A HOME PAGE Figure 24. PelcoNet Home Page The home page is the starting point for any configuration. The window in the left of the screen is the display area for decoded video. • Clicking the Pelco logo on any page connects you to the Pelco Internet home page (provided the LAN supports Internet access). • Clic[...]

  • Page 34

    34 C2904M-B (2/05) CONFIGURA TION PAGE FOR GENERAL SETTINGS The unit identification, password, date and time, timer server , and software update settings, as well as version information, c omprise the General Settings configuration page. All units have a real-time clock set during manufacture. However , time and date can be changed any time; for ex[...]

  • Page 35

    C2904M-B (2/05) 35 Table A. General Settings Configuration Default Description Item Setting Unit Name None The Unit name and Unit ID identify the device; for example, in the event of an alarm call. (For future development.) Unit ID None The ID serves as a machine-readable name. (For future development.) Password level None Select the password level[...]

  • Page 36

    36 C2904M-B (2/05) Table A. General Settings (Continued) Configuration Default Description Item Setting Upload 0% This field shows the percentage of the upload that has been completed. progress Configuration N/A Clicking the Download button saves the current configuration of the PelcoNet NET4001 transmission system download to a PC file. Configurat[...]

  • Page 37

    C2904M-B (2/05) 37 CONFIGURA TION PAGE FOR MPEG 1/-2 VIDEO ENCODER SETTINGS Figure 27. Configuration Page for MPEG 1/-2 Video Encoder Settings MPEG-2 encoder and live page settings make up the configuration page for MPEG 1/-2 video encoder settings. The following table describes the configuration items. Table B. Configuration Page for MPEG 1/-2 Vid[...]

  • Page 38

    38 C2904M-B (2/05) CONFIGURA TION PAGE FOR MPEG-4 VIDEO ENCODER SETTINGS Figure 28. Configuration Page for MPEG-4 Video Encoder Settings MPEG-4 encoder and live page settings make up the configuration page for MPEG-4 video encoder settings. The following table describes the configuration items. Table C. Configuration Page for MPEG-4 Video Encoder S[...]

  • Page 39

    C2904M-B (2/05) 39 CONFIGURA TION PAGE FOR VIDEO DECODER SETTINGS Figure 29. Configuration Page for Video Decoder Settings V ideo monitor name, output standard, and input termination make up this page. The following table describes the configuration items. Table D. Configuration Page for Video Decoder Settings Configuration Default Description Item[...]

  • Page 40

    40 C2904M-B (2/05) CONFIGURA TION PAGE FOR ALARM SETTINGS The PelcoNet NET4001 transmission system is not only a multimedia gateway but also a security device and, therefore, has many features related to security applications. The configuration page for alarm settings lets you configure your unit for surveillance applications. In most surveillance-[...]

  • Page 41

    C2904M-B (2/05) 41 Figure 32. Motion Detection Grid Screen The set of alarm features is explained below . Table E. Alarm Settings Configuration Default Description Item Setting Video motion N/A The system has a video motion detection feature. The video scene is monitored constantly for relevant motion. alarm NOTE: Use of the motion detection featur[...]

  • Page 42

    42 C2904M-B (2/05) Table E. Alarm Settings (Continued) Configuration Default Description Item Setting 8. Use the Object min size [nxn blocks] slide bar to designate the minimum number of cells in the frame a moving object must fill to trigger an alarm. Y ou can set the value between 1*1 and 6*6 (2*2 is recommended). If the size of the object in the[...]

  • Page 43

    C2904M-B (2/05) 43 CONFIGURA TION PAGE FOR RELA Y SETTINGS Y ou can use the configuration page for relay settings to specify parameters such as normally open or normally closed switching and bistable or monostable operation of the output. Figure 33. Configuration Page for Relay Settings The relay settings are described in the following table. Table[...]

  • Page 44

    44 C2904M-B (2/05) CONFIGURA TION PAGE FOR COM 1 INTERFACE SETTINGS Y ou can use this configuration page to set the parameters of the COM1 RS-232/RS-485 serial interface port. Figure 34. Configuration Page for COM 1 Interface Settings Table G. Interface Settings for COM 1 Configuration Default Description Item Setting Serial port T erminal Select a[...]

  • Page 45

    C2904M-B (2/05) 45 CONFIGURA TION PAGE FOR COM 2 INTERFACE SETTINGS Y ou can use this configuration page to set the parameters of the COM2 RS-232/RS-485 serial interface port. Table H. Interface Settings for COM2 Configuration Default Description Item Setting Serial port T ransparent Select the function for serial port 2 from the pull-down menu: T [...]

  • Page 46

    46 C2904M-B (2/05) CONFIGURA TION PAGE FOR NETWORK SETTINGS Figure 36. Configuration Page for Network Settings Network and routing information make up the configuration page for network settings. These settings are used to integrate the NET4001A into an existing network. The following table describes the configuration items. NOTE: When you change t[...]

  • Page 47

    C2904M-B (2/05) 47 Table I. Network Settings Configuration Default Description Item Setting Unit IP address 192.168.0.1 Enter a unique IP address that is valid for your network. The pre-configured default IP address allow s for easy configuration in closed environments. Y ou can use a crossed cable to connect directly to a PC. NOTE: Changing the IP[...]

  • Page 48

    48 C2904M-B (2/05) LIVE VIDEO P AGE INDICA TORS These five indicators are located at the top of the Live Video and live video Control pages. Indicator Description MPEG-2/MPEG-4 Indicates whether live viewing is in MPEG-2 or MPEG-4 format. Y ou can assign this on the V ideo Encoder Settings page. M (motion detector) When motion alarm is triggered, t[...]

  • Page 49

    C2904M-B (2/05) 49 LIVE VIDEO AND SERVER PUSH VIDEO P AGES Figure 37. Live Video Page The Live Video page shows a real-time picture of a camera view with update rates and image quality similar to a box-to-box configuration. It can be configured for bandwidth use and for various image quality settings. The Server Push page shows still pictures that [...]

  • Page 50

    50 C2904M-B (2/05) WEB BROWSER CONTROL P AGES ACCESSING THESE P AGES 1. T o access the PelcoNet NET4001 transmission system home page, you must first connect to the Internet/intranet network and open Internet Explorer (the browser). 2. Then, enter the default address 192.168.0.1 in the address box. If this address has been changed, enter the applic[...]

  • Page 51

    C2904M-B (2/05) 51 MA TRIX CONTROL LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 39. Matrix Control Page The Matrix Control pages contain the following: •T en numbered buttons • CLR (clear) button • CAM (camera) button • MON (monitor) button • PRST (preset) button •P A TT (pattern) button • MAC (macro) button • STOP button • BWD (b[...]

  • Page 52

    52 C2904M-B (2/05) GENEX LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 40. Genex Control Page The Genex pages contain the following across the top of the page: • Main and Spot monitor selection radio buttons •A LIVE/VCR button •A Sequence button •A View button •A zoom button •A picture-in-picture button • Buttons for 4-, 9-, and 16-scr[...]

  • Page 53

    C2904M-B (2/05) 53 SPECTRA LIVE VIDEO/SERVER PUSH P AGE CONTENTS Figure 41. Spectra Control Page The Spectra pages contain the following arrayed down the right side under “Lens”: • Iris open and close buttons • Focus far and near buttons • Zoom out and in buttons The following are arrayed under “Pan/T ilt”: • Eight direction arrow b[...]

  • Page 54

    54 C2904M-B (2/05) Figure 42. Esprit Control Page The Esprit pages contain the following arrayed down the right side under “Lens”: • Iris open and close buttons • Focus far and near buttons • Zoom out and in buttons The following are arrayed under “Pan/T ilt”: • Eight direction arrow buttons • Home button in the center The followi[...]

  • Page 55

    C2904M-B (2/05) 55 ADV ANCED FEA TURES AUTOMA TIC CONNECTION FEA TURE The advantage of conventional dedicated cabling lies in guaranteed performance and availability . The PelcoNet transmission syst em’ s auto-connect feature is designed to provide the same level of guaranteed connectivity expected from analog coaxial video cables. IT networks co[...]

  • Page 56

    56 C2904M-B (2/05) VIEWING A SNAPSHOT Y ou can view a snapshot by double-clicking on the desired file (.jpg extension) in Windows Explorer . RECORDING THE VIDEO DISPLA Y Y ou can record the camera display from the Live V ideo or live video Matrix, Genex, Spectra, and Esprit control pages. The file is recorded on the PC on which you are viewing the [...]

  • Page 57

    C2904M-B (2/05) 57 FIRMWARE UPLOAD Units have flash EPROMs for firmware upgrades in the field. These upgrades can be done directly from the web browser . Do the following to upload firmware using the web browser . 1. Obtain the latest PelcoNet NET4001A transmission system firmware from Pelco (http://www .pelco.com). 2. Use the browser to select the[...]

  • Page 58

    58 C2904M-B (2/05) TROUBLESHOOTING If the following instructions fail to solve your problem, contact Pelco T echnical Support at 1-800-289-9100 for help. Y ou should have the serial number from the bottom of the unit and the firmware version ready in case they are needed. Do not try to repair a unit yourself. Opening it immediately voids any warran[...]

  • Page 59

    C2904M-B (2/05) 59 TROUBLESHOOTING CONNECTION PROBLEMS If you fail to connect to a system from a hardware receiver , make sure network connectivity is available (for example, by using the ping command). TROUBLESHOOTING THE VIDEO CONNECTION If no video or a distorted video image is displayed at the receiver during a connection to a transmitter: • [...]

  • Page 60

    60 C2904M-B (2/05) GENERAL REMEDIES T ABLE Problem Possible Causes Suggested Remedy No connection between unit and terminal Faulty cable connections. Check all leads, plugs, contacts, and connections. program. The computer’ s serial interface is not Check other serial interfaces. connected. Interface parameters do not match. If necessary , select[...]

  • Page 61

    C2904M-B (2/05) 61 SPECIFICA TIONS NETWORK PROTOCOL AND ST ANDARDS COMP A TIBILITY Internet Configuration: RTP , RTCP , UDP , TCP , IP , HTTP , SNMP , IGMP , ICMP , ARP , DHCP Video Coding: MPEG-1, MPEG-2, MPEG-4, (M-JPEG in Server Push mode only) V ideo Frame Rate: Up to 30 images/second INTERFACE V ideo Input: 1 BNC, P AL/NTSC, 75 ohms, 1 Vp-p V [...]

  • Page 62

    62 C2904M-B (2/05) GLOSSARY 10BASE-T IEEE 802.3 specification for 10 or 100 Mbs Ethernet ARP Address Resolution Protocol Baud rate Data transmission rate bps Bits per second, the actual data rate Cat5 Cable T ype of cable used on a LAN to connect computers, printers, and transmitters and r eceivers to a hub on the network CIF Common Intermediate Fo[...]

  • Page 63

    C2904M-B (2/05) 63 LAN See Local Area Network Local Area Network Multiple computers linked together into a network to share information within a limited geographic area (such as a building or a campus) controlled by a network operating system and using a transport protocol MAC Address Media Access Control/hardware address Mbps Megabits per second; [...]

  • Page 64

    64 C2904M-B (2/05) APPENDIX A – CONNECTING PELCONET NET4001A TO V ARIOUS COMPONENTS Some of the connection examples that follow require the customer to supply a DB9 cable. Refer to the following figure when one is needed. Figure 44. DB9 Cable Wire Splicing 1 2 3 4 5 6 7 8 9 PIN DCD (DA T A CARRIER DETECT) RXD (RECEIVE DA T A) TXD (TRANSMIT DA T A[...]

  • Page 65

    C2904M-B (2/05) 65 Figure 45. KBD300A (Direct Mode) Connected to a Receiver or Spectra Dome System TX- TX+ P PROTOCOL ONLY RECEIVER OR SPECTRA RX+ RX- Video In Video Out Audio Out Audio In COM1: RS232/485 10/100 Base-T Ethernet Power 100-250VAC50/60Hz 100mA COM2: RS232 PELCONET TRANSMITTER 4800, 8, NONE, 1 CONNECTING PELCONET TO V ARIOUS COMPONENTS[...]

  • Page 66

    66 C2904M-B (2/05) CONNECTION SCENARIO 2 – USING A KBD4000 FOR MUL TIPLEXER CONTROL Refer to Figure 46 and the instructions that follow . NOTE: If you set all your cameras to Standard Coaxitron for better control on the browser , you will lose most of the KBD4000 keyboa rd control functions. If you set your cameras to Extended Coaxitron, you will[...]

  • Page 67

    C2904M-B (2/05) 67 CONNECTION SCENARIO 3 – USING A CM9760-KBD Refer to Figure 47 and the instructions that follow . Figure 47. CM9760KBD Connected to a CM9760-CC1 Controller 1. Connect a PV130 converter to the COM1 port on the back of the NET4001A receiver unit. (For Interface Mode select RS232.) The data format must be 4800 baud, 8 data bits, ev[...]

  • Page 68

    68 C2904M-B (2/05) CONNECTING PELCONET TO THE COM IN RS-422 PORT ON A GENEX MUL TIPLEXER Refer to Figure 48 and the instructions to follow . Figure 48. Connecting PelcoNet to Genex Using the COM IN RS-422 Port 1. V erify that the multiplexer has Version 4.1 fir mware. (The version number flashes on the monitor when power is applied to the multiplex[...]

  • Page 69

    C2904M-B (2/05) 69 CONNECTING PELCONET TO A CM9502 ASCII SERIAL PORT Refer to Figure 44 and Figure 50. This configuration lets an operator view and control cameras from a PC using a web browser . (The operator’ s PC is not shown on the diagram.) Figure 50. Using PelcoNet with CM9502 to Provide Remote Control Vi deo In Video Out Audio Out Audio In[...]

  • Page 70

    70 C2904M-B (2/05) CONNECTING PELCONET TO A CM6700 AND KBD200A FOR REMOTE ASCII CONTROL Refer to Figure 51. This configuration lets an operator view and control cameras with a remote KBD200A keyboard. Figure 51. Using PelcoNet with CM6700 and KBD200A to Provide Remote Control Vid eo In Video Out Audio Out Audio In COM1: RS232/485 Ethernet Power 100[...]

  • Page 71

    C2904M-B (2/05) 71 CONNECTING PELCONET TO A CM6700 ASCII PORT Refer to Figure 52. This configuration lets an operator view and control cameras from a PC using a web browser . (The operator’ s PC is not shown on the diagram.) Figure 52. Using PelcoNet with CM6700 to Provide Remote Control Vid eo In Video Out Audio Out Audio In COM1: RS232/485 10/1[...]

  • Page 72

    72 C2904M-B (2/05) CONNECTING PELCONET TO A CM9760-DT FOR REMOTE BROWSER CONTROL Refer to Figure 53. This configuration lets an operator view and control cameras on a PC using a web browser . (The operator’ s PC is not shown on the diagram.) Figure 53. Using PelcoNet with CM9760-DT to Provide Remote Control of a 9760 Monitor Output Vi deo In Vide[...]

  • Page 73

    C2904M-B (2/05) 73 CONNECTING PELCONET TO CM9760 EQUIPMENT FOR REMOTE COMMUNICA TION Refer to Figure 44 and Figure 54 and Figure 55. These configurations let an operator remotely view and control cameras connected to the CM9760. Figure 54. Using PelcoNet to Transmit Data and Video Between 9760 Nodes Vi deo In Video Out Audio Out Audio In COM1: RS23[...]

  • Page 74

    74 C2904M-B (2/05) CONNECTING A PELCONET TRANSMITTER TO THE CM6800 ASCII PORT Refer to Figure 56. This configuration lets an operator view and control cameras with a PC using a web browser . (The operator’ s PC is not shown on the diagram.) All settings are done in the CM6800 manager program or through a CM6800 menu. Note the following: • Port [...]

  • Page 75

    C2904M-B (2/05) 75 Figure 57. Manager Screen SET SERIAL PORT 07 DEVICE: ASCII TYPE: RS232 BAUD RA TE: 9600 P ARITY : ODD DA T A BITS: 8 STOP BITS: 1 RETURN Figure 58. Menu Screen[...]

  • Page 76

    76 C2904M-B (2/05) CONNECTING PELCONET TO A CM6800 AND KBD200A FOR REMOTE ASCII CONTROL Refer to Figure 59. This configuration lets an operator view and control cameras with a remote KBD200A keyboard. All settings are done in the CM6800 manager program or through a CM6800 menu. Note the following: • Port 2 defaults to ASCII and RS-232. • Ports [...]

  • Page 77

    C2904M-B (2/05) 77 APPENDIX B – FREQUENTL Y ASKED QUESTIONS (FAQS) 1. What Pelco devices can I control from my computer with the PelcoNet NET4001 transmission system? PelcoNet can control the following from Internet Explorer: • Spectra and Esprit • Genex multiplexer • CM9760 (requires CM9760 data translator) • CM9740 (requires CM9760 data[...]

  • Page 78

    78 C2904M-B (2/05) 12. What type of compression does PelcoNet use? PelcoNet uses the MPEG-2 and MPEG-4 industry standards for video teleconferencing over the Internet. They provide the most effective use of bandwidth with excellent video quality . 13. I do not get live video in the browser but server push is working. What could be wrong? V erify th[...]

  • Page 79

    C2904M-B (2/05) 79 INDEX A alarm input 26 Alarm indicator 42 Alarm input 42 Automatic connection 55 A verage n [frames] 41 B Baud rate 44, 45 Box-to-box connection 15 C Camera (name) 37, 38 Configuration download 36, 57 Configuration upload 36, 57 Configuration with terminal program 28 Configuration with web browser 31 Connect on alarm 55 Connectio[...]

  • Page 80

    80 C2904M-B (2/05) T Te rminal program commands 29 Ti me server IP address 35 Ti me zone 35 T racker 41 T ransparent data 25 T rigger relay 43 U Unit date 35 Unit ID 35 Unit IP address 47 Unit name 35 Unit time 35 Upload progress 36 V V ideo input termination 39 V ideo loss alarm 42 V ideo monitor name 39 V ideo motion alarm 41 V ideo on live page [...]

  • Page 81

    C2904M-B (2/05) 81 PRODUCT WARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or work- manship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products and the followi[...]

  • Page 82

    World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada ®[...]