Panasonic TH-37LRU5 manual

Installer ’ s Manual Hospitality LCD HDTV TQB2AA0656F Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only . English Model No. TH-32LRU5 TH-37LRU5 TH-42LRU5[...]

2 This product incorporates the following software or technology: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software based in part on the work of the Independent JPEG Group, (4) the software developed by the FreeT ype Project. (5) op[...]

3 Viewing Advanced Support Information Quick Start Guide HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD- 3C, LLC. This product qualifies for ENERGY ST AR in the factory default setting and this is the[...]

4 ANTENNA LEAD-IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, P AR T H) ELECTRIC SERVICE EQUIPMENT GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NA TIONAL ELECTRICAL CODE Safety Precautions Note to CA TV System Installer This[...]

5 19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 2[...]

6 CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendati ons. Flat panel displays that are inappropriat ely situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death. The consume[...]

7 Quick Start Guide Accessories/Optional Accessory Optional Accessory W all-hanging bracket TY -WK3L2R W W ARNING Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Back of the TV Holes for wall-hanging bracket installat[...]

8 Accessories Assembly screws A Screws (4) XSS4+16FJK size (M4 × 16) B Security screw (1) THE2AC004J size (M4 × 12) C Screws (4) XYN4+F12FJK size (M4 × 12) Bracket (1) TBL4GA3014 (TH-32LRU5) TBL2AA3005 (TH-37LRU5) TBL2AA3006 (TH-42LRU5) Base (1) TBL2AX00501A (TH-32LRU5) TBL2AX0051 1 (TH-37LRU5) TBL2AX00521 (TH-42LRU5) ■ Assembling the pedestal[...]

9 Quick Start Guide Accessories/Optional Accessory Accessories A Screws (2) XSN3+4FJ size (M3 × 4) B Security screw (2) THM2AB001 C Wood screws (4) XTS5+20AFJK Location Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluo[...]

10 Connections Connection panel ■ Side panel ■ Back panel RF connection* * For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.[...]

11 Quick Start Guide Connections Example of connections T o use HDMI terminals HDMI A V OUT e.g. Blu-ray Disc player A V Equipment Side panel Back panel HDMI cable Connecting to the HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. The HDMI connection is required for a 1080p signal. VIERA Link connection[...]

12 T o use COMPOSITE terminals L R or r ed red red e.g. VCR COMPOSITE OUT yel lo w w hit e y ellow wh ite yellow white e.g. DVD Recorder A V Equipment T o use AUDIO OUT terminals Connect a cable which matches the audio in terminal on the unit. Audio equipment AUDIO IN Audio cable T o use MTI terminal External T A MTI OUT T erminal adapter Cross Cab[...]

13 Quick Start Guide Identifying Controls Connections Note The TV consumes a small amount of electric energy even when turned off. Do not place any objects between the TV remote control sensor and remote control. Do not place C.A.T .S. in a blocked area. Identifying Controls Power indicator ( on: red, off: no light) TV controls/indicators Changes t[...]

14 TV operation or T urn the TV On with the POWER button (TV) or (Remote) Input select: press (p. 15) Select a channel number up down or (Remote) T o directly enter the digital channel number When tuning to a digital channel, press the button to enter the minor number in a compound channel number . example: CH15-1: (TV) Note Reselect “Cable” or[...]

15 Viewing W atching Videos and DVDs TV operation If you have applicable equipment connected to the TV , you can watch videos and DVDs on the TV screen. Input Select Y ou can select the external equipment to access. T o return to TV With the connected equipment turned On Display the Input select menu Select the input mode Input select TV 1 2 3 5 6 [...]

16 Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV . Y ou can also listen to PC sound with the audio cable connected. T o connect PC (p. 12) PC menu setting (change as desired) Making settings “How to Use Menu Functions” to (p. 21) Menu Item Adjustments/Configurations (options) Picture PC adjustm[...]

17 Viewing Viewing from an SD card Displaying PC Screen on TV V iewing from an SD card This function that lets you easily view still images on a television by simply inserting an SD card into the SD card slot. (Media other than SD Cards will not work.) Press to exit from a menu screen Press to return to the previous screen Insert the SD card Insert[...]

18 Display the SUB MENU Note This operation is disabled when “Mode” in Hotel Mode menu is set to “On”. Display “Setup SUB MENU” and select item SUB MENU select OK Setup SUB MENU Slideshow settings Thumbnails size Slideshow settings (see below) Thumbnails size T o change the number of photos on a thumbnail screen at a time (7 × 4 ⇔ 10[...]

19 Viewing Viewing from an SD card Other settings in IMAGE VIEWER Note This operation is disabled when “Mode” in Hotel Mode menu is set to “On”. Display “Menu” Select the item select OK Menu Picture Audio Set Adjust the Picture and Audio select adjust 0 +20 0 0 0 0 Vivi d Picture 1/2 Brightness Color Tint Sharpness Picture mode Contrast[...]

20 Hotel Mode Setup Display “Hotel Mode” Press MENU, G, Y and 0 remote button. Hotel Mode Mode T A Ctrl Initial input Initial channel Save 1/3 HDMI 1 101-1 On External select Adjust Select “Save” then press OK Complete Hotel Mode setup Hotel Mode Mode T A Ctrl Initial input Save 1/3 HDMI 1 On External select ok Operating restrictions can be[...]

21 Advanced How to Use Menu Functions Hotel Mode Setup How to Use Menu Functions V arious menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Guest menu (p. 34) Press to exit from a menu screen Press to return to the previous screen Display the menu Shows the functions [...]

22 How to Use Menu Functions Menu list Menu Item Adjustments/Configurations (alternatives) Picture Reset to defaults* Resets all picture adjustments to factory default settings except for “Advanced picture”. Picture mode Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 44) Back light Adjusts the luminance of the back light. Contrast, Brigh[...]

23 Advanced How to Use Menu Functions (picture, sound quality , etc.) (Continued) Menu list Menu Item Adjustments/Configurations (alternatives) Audio Advanced audio Surround Enhances audio response when listening to stereo. (Off/On) V olume leveler Minimizes volume disparity after switching to external inputs. TV speakers Switches to “Off” when[...]

24 VIERA Link TM “ HDA VI Control TM ” Simultaneously control all Panasonic “HDA VI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with compatible Panasonic products. This TV supports “HDA VI Control 5” function. Connections to equipment (DVD recorder DIGA, HD Camcorder , Home the[...]

25 Advanced VIERA Link™ Connections (with VIERA Link function) ■ T erminal overview Back of the TV ■ Connecting DVD Recorder (DIGA) DVD recorder (DIGA) with VIERA Link function HDMI cable ■ Connecting Home theater system/A V amp HDMI 1 is recommended. HDMI cable Home theater systems with VIERA Link function A V amp with VIERA Link function [...]

26 VIERA Link settings and Available features T o use all VIERA Link functions : After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”. Some features are disabled depending on the “HDA VI Control” version of the equipment. Please check the list (p. 24) Press to exit from a menu screen Press to go back to t[...]

27 Advanced Automatic Input Switching When using a Blu-ray Disc player , DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. • For a Home theater system the speakers automatically switch to the theater system. Power off link When “Y es” is selecte[...]

28 Y ou can lock specified channels or shows to prevent children from watching objectionable content. Press to exit from a menu screen Caution Make a note of your password in case you forget it. (If you have forgotten your password, consult your local dealer .) Note When you select a locked channel, a message will be displayed that allows you to vi[...]

29 Advanced Lock Program lock T o set a rating level “V -chip” technology enables restricted shows to lock according to TV ratings. Select “Mode” and set to “On” Menu On Off Off Off Off Program lock Mode MP AA U.S.TV C.E.L.R. C.F .L.R. set select Select the rating category you wish to follow Menu On Off Off Off Off Program lock Mode MP [...]

30 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. Press to exit from a menu screen Display the menu Select “Setup” Menu Adjusts Surf mode, Language, Clock, Channels, Inputs, and other settings. Setup Advanced setup About Reset to defaults ECO/energy saving Ant/Cable Set[...]

31 Advanced Editing and Setting Channels Automatically searches and adds available channels to the memory . Select “ANT in” Select “Cable” or “Antenna” Or select “Not used”. Select “Auto program” Menu Cable ANT/Cable setup ANT in Auto program Manual program Signal meter next select Start scanning the channels (Available channels[...]

32 Press to exit from a menu screen Display the menu Select “Closed caption” Menu Display broadcast TV’s Closed Caption (CC) text when available. Primary CC1 On Closed caption Digital Mode Analog Digital setting Reset to defaults next select Closed Caption Closed caption Display Closed caption The television includes a built-in decoder that i[...]

33 Advanced Input Labels Closed Caption Press to exit from a menu screen Display the menu Select “Setup” Menu Adjusts Surf mode, Language, Clock, Channels, Inputs, and other settings. Setup Advanced setup About Reset to defaults ECO/energy saving Ant/Cable Setup Language Connected devices VIERA Link settings next select Select “Connected devi[...]

34 Press to exit from a menu screen Display the menu Shows the functions that can be adjusted. Some functions will be disabled depending on the type of input signal. Select the item Menu Lock Closed caption SD card Input select Audio mode FULL Screen format Language 0 Sleep (minutes) English (Main Audio) select Adjust or select Menu Lock Closed cap[...]

35 Advanced Signage Mode Guest Menu Y ou can set “Signage Mode” to display the digital signage contents on the SD Card. Display “Hotel Mode” menu • Hotel Mode Setup (p. 20) Press MENU, G, Y and 0 remote button. (“Mode” must be “On” ) Hotel Mode Mode T A Ctrl Initial input Save 1/3 HDMI 1 On Off select set Select “Initial input?[...]

36 Y ou can set a specific image that is displayed as a Opening Image when the TV is turned on. Prepare Welcome Image (JPEG) in the SD card • Opening image at root directory of the SD card File name: Welcome.jpg • Recommended image size: 1,366x768 pixels, 200 KB Insert SD card (p. 17) Display “Hotel Mode” menu • Hotel Mode Setup (p. 20) P[...]

37 Advanced Loading Welcome Image Error messages Massage Meaning Please insert SD card to load image. • No SD Card is detected. Image file is not found. • No supported image file is found in the SD Card. The image file is too large. • The file size is too big. (Maximum file size: 1MB) The image file is invalid. • The image file format is no[...]

38 Local Authentication Mode At the Free-T o-Guest by Stand Alone mode, descramble of Pro:Idiom is conducted without using built-in T A. Contact Panasonic sales company for Hotel ID and channel map information Setup Local Authentication Insert the SD card to first TV set Display the Local Authentication screen automatically • Insert/Remove the SD[...]

39 Advanced Channel Remap Local Authentication Mode Channel Remap Contact Panasonic sales company for channel map information * Hotel ID is not needed for this function. Setup Channel Remap Insert the SD card to first TV set Display the Channel Remapping screen automatically • Insert/Remove the SD card (p. 17) Input 4-digit password (2251) 2251 I[...]

40 Clone the TV Setting (SD clone) When installing a number of units in hotel or any facility , the data in master TV can be copied to SD card and then copy to other TVs. Prepare blank SD card • Create pwd file as startup file at root directory of an empty SD card using your PC. Insert a empty SD card to your PC. Right-click a blank area in a SD [...]

41 Ratings List for Lock Clone the TV Setting (SD clone) Advanced Support Information Ratings List for Lock “V -chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry . (p. 29) U.S. MOVIE RA TINGS (MP AA) NR NO RA TING (NOT RA TED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has [...]

42 T echnical Information Closed caption (CC) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST , ZOOM or 4:3; characters might be cut off). The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On using the Component or HDMI connection to the TV[...]

43 T echnical Information Support Information Message Meaning Please insert SD memory card into the SD slot at the side of the TV . The card is not inserted. No photos The card has no data or this type of data is not supported. Cannot read file The file is broken or unreadable. The TV does not support the format. Data format for SD Card browsing Ph[...]

44 HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player , can be connected to the HDMI connector using an HDMI compliant[...]

45 T echnical Information Support Information Input signal that can be displayed * Mark: Applicable input signal for Component (Y , P B , P R ), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC 525 (480) / 60i 15.73 59.94 ** 525 (480) /60p 31.47 59.94 ** 750 (720) /60p 45.00 59.94 ** 1,125 (1,080) /60i 33.75 59.94 **[...]

46 T roubleshooting Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. White spots or shadow images (noise) Check the position, direction, and connection of the antenna. Interference o[...]

47 T roubleshooting Support Information Screen Sound Other Problem Actions If there is a problem with your TV , please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer , quoting the model number and serial number (both found on the [...]

48 Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth. If the surface is particularly dirty , soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild l[...]

49 Specifications Care and Cleaning Support Information Specifications Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. TH-32LRU5 TH-37LRU5 TH-42LRU5 Power Source AC 1 10-127 V , 60 Hz Power Consumption Rated Power Consumption 1 15 W 165 W 205 W Standby condition 0.9 W 0.9 W 0.9 W Displ[...]

Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.[...]