Panasonic PT-DX610ELKJ manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Panasonic PT-DX610ELKJ, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Panasonic PT-DX610ELKJ one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Panasonic PT-DX610ELKJ. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Panasonic PT-DX610ELKJ should contain:
- informations concerning technical data of Panasonic PT-DX610ELKJ
- name of the manufacturer and a year of construction of the Panasonic PT-DX610ELKJ item
- rules of operation, control and maintenance of the Panasonic PT-DX610ELKJ item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Panasonic PT-DX610ELKJ alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Panasonic PT-DX610ELKJ, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Panasonic service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Panasonic PT-DX610ELKJ.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Panasonic PT-DX610ELKJ item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    ENH A NCING C OMMUNIC A T ION WI T H B R I G HT , C R I S P I MA G ES PT - D Z680 S ER I ES 1- C h i p D L P ™ P r o j e c t o r s PT - DZ68 0 PT - DZ68 0 L PT - DW 64 0 PT - DW 64 0 L PT - DX6 10 PT - DX6 10 L PT – DZ6 80 S PT – DZ6 80 LS WUXGA 6,000 lm PT – DW640 S PT – DW640 LS WXGA 6,000 lm PT – DX6 1 0 S PT – DX6 1 0 LS XGA 6,500[...]

  • Page 2

    BRIGH T , V ERS A TIL E OPER A TION I N A COM P AC T PR OJ E C TOR Panasonic PT -DZ680 Series 1-chip DLP TM projectors, f eaturing a dual- lamp system, are compact but powerful. The RGB Booster ensur es vivid, colourful images, and the original Eco Filter eliminates the need for filter r eplacement for up to 12,000 hours. A host of terminals and ad[...]

  • Page 3

    High Brightness with High-Power A C Lamp The high-efficiency light convergence technology and the colour wheel work together to achieve the high brightness of 6,000 lm for the PT -DZ680/DW640 and 6,500 lm for the PT -D X610. Clear , crisp images are reproduced ev en in bright rooms. RGB Booster Significantly Improves Colour R eproduction The RGB Bo[...]

  • Page 4

    Eco Filter that Needs No Maintenance for up to 12,000 Hours *2 The original Eco Filter consists of two Micro Cut Filters (electrostatic filters), a pre-filter and a main filter , which use an ion effect to collect extremely small dust particles. The pre-filter has a honeycomb configuration and the main filter is pleated to achieve a large surface a[...]

  • Page 5

    Side-by-Side F unction *9 The PT -DZ680 and PT -DW640 can simultaneously display images from two sources onto a single screen. F or example, you can display a PC image on the left and a video image on the right. T aking advantage of the wide-screen projection, this function gives you a host of ne w application possibilities to explore. Multi Projec[...]

  • Page 6

    PT DZ6 80 (16: 10 A S P E C T R A T I O) PROJEC TION DIS TANCE UN I T: M E T E R S (F E E T ) TERM INALS 1 2 3 4 5 6 7 8 9 10 11 12 Diagonal image size (th ro w ra ti o) Throw d istance ET- DLE080 0.8– 1.0: 1 ET -D LE1 50 1.3 –1.9 :1 Supplied lens 1.7–2 . 4 :1 ET -D LE250 2.3–3.6: 1 ET -D LE350 3.6–5.4:1 ET -D LE450 5.4–8.6: 1 ET -D [...]

  • Page 7

    PT DW 640 (16: 10 A S P E C T R A T I O) PT DX 6 1 0 (4 : 3 A S P E C T R AT IO) Diagonal image size (th ro w ra ti o) Throw d istance ET- DLE080 0.8– 1.0: 1 ET -D LE1 50 1. 4-2 . 0 :1 Supplied lens 1.8 –2 . 5 :1 ET -D LE250 2.4–3.8: 1 ET -D LE350 3.8–5.7: 1 ET -D LE450 5.6–9.0 : 1 ET -D LE055 0.8: 1 min. max. min. max. min. max. mi[...]

  • Page 8

    Al l in fo rm at io n in cl ud ed h er e is v al id a s of N ov em be r 20 12. We igh t s an d dim en si on s sh o wn a re a pp ro xi ma t e. S pe ci f ic at io ns a nd a pp ea r anc e ar e s ub je ct t o ch an ge w i th ou t n ot ic e. D L P , DL P lo go a nd D L P Me da ll io n lo go a r e tr ad em ar k s or r eg is t er ed t r ad em ar ks o f Te[...]

  • Page 9

    ENGLISH - 9 r r T rademarks • Microsoft ® , Windows ® , Windows Vista ® , and Internet Explorer ® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Mac, Mac OS, Mac OSX, and Safari are the trademarks of Apple Inc. registered in the United States and other countries. • PJLin[...]

  • Page 10

    10 - ENGLISH Features of the Projector High luminance & High color reproducibility ▶ The unique optical and lamp drive systems achieve a high luminance and high color reproducibility while saving power . Easy setup and improved serviceability ▶ Extensive lineup of optional lenses allow more exible setup of the projector . Improved cost p[...]

  • Page 11

    ENGLISH - 11 Contents Contents Read this rst! ............................................ 2 Chapter 1 Preparation Precautions for use ................................................. 14 Cautions when transporting .................................. 14 Cautions when installing ....................................... 14 Security .................[...]

  • Page 12

    12 - ENGLISH Contents [DISPLA Y LANGUAGE] menu ................................. 65 Changing the display language ............................ 65 [DISPLA Y OPTION] menu ........................................ 66 [COLOR MA TCHING] ........................................... 66 [COLOR CORRECTION] ..................................... 67 [CONTRAST MO[...]

  • Page 13

    ENGLISH - 13 Chapter 1 Preparation This chapter describes things you need to know or check before using the projector .[...]

  • Page 14

    14 - ENGLISH Chapter 1 Preparation — Precautions for use Precautions for use Cautions when transporting r f The projection lens is susceptible to effects from vibration or impact. Make sure to remove the projection lens when transporting. Also, use a protection cover or the like to prevent dust from affecting the projection lens or the set. r f W[...]

  • Page 15

    ENGLISH - 15 Chapter 1 Preparation — Precautions for use r f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using it for other purposes may damage the set. 6FUHZKROHVIRUFHLOLQJPRXQW0 $GMXVWDEOHIHHW )LJ7KHSRVLWLRQVRIVFUHZKROHVIRUFHLOLQJPRXQW[...]

  • Page 16

    16 - ENGLISH Chapter 1 Preparation — Precautions for use Disposal T o dispose of the product, ask your local authorities or dealer for correct methods of disposal. The lamp contains mercury . When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal. Cautions on use r r T o get a good picture qual[...]

  • Page 17

    ENGLISH - 17 Chapter 1 Preparation — Precautions for use Accessories Make sure that the following accessories are provided with your projector . Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit <1> (N2QA YB000784) Power cord <1> (K2CM3FZ00003) Power cord <1> (K2CT3FZ00003) Projecti[...]

  • Page 18

    18 - ENGLISH Chapter 1 Preparation — Precautions for use Optional accessories Optional accessories (product name) Model No. Projection lens ET -DLE055 (xed-focus lens), ET-DLE080 (ultra short-focus zoom lens), ET -DLE150 (short- focus zoom lens), ET -DLE250 (medium-focus zoom lens), ET-DLE350 (long-focus zoom lens), ET -DLE450 (ultra long-focu[...]

  • Page 19

    ENGLISH - 19 Chapter 1 Preparation — Start-up display Start-up display The initial setting screen is displayed when the projector is switched on for the rst time after purchase as well as when [INITIALIZE] – [ALL USER DA T A] ( x page 82) is executed. Set them in accordance with circumstances. In other occasions, you can change the settings [...]

  • Page 20

    20 - ENGLISH Chapter 1 Preparation — About your projector About your projector Remote control                    )URQW 7R S %RWWRP 1 Remote control indicator Flashes if any button in the remote control is pressed. 2 Power standby < v > button Sets the pro[...]

  • Page 21

    ENGLISH - 21 Chapter 1 Preparation — About your projector Projector body                  )URQW )URQW )URQW 6LGH 5HDU    )URQW %RWWRP W arning Keep your hands and other objects away from the air exhaust port. r f Keep your hands[...]

  • Page 22

    22 - ENGLISH Chapter 1 Preparation — About your projector r r Control panel 9 10 11 12 13 14 1 2 3 4 5 6 7 8 1 Power standby < v > button Sets the projector to the standby mode when the <MAIN POWER> switch on the projector is set to <ON>. 2 Power on < b > button Starts projection when the <MAIN POWER> switch on the p[...]

  • Page 23

    ENGLISH - 23 Chapter 1 Preparation — Using the remote control Using the remote control Inserting and removing the batteries 1) Open the cover . (i) (ii) 2) Insert the batteries and close the cover (insert the m side first). r f When removing the batteries, perform the steps in reverse order . Setting Remote control ID numbers When you use the sys[...]

  • Page 24

    24 - ENGLISH Chapter 1 Preparation — Using the remote control Connecting to the projector with a cable When you use the system with multiple projectors, congure the units as in the following gure. Use a commercial M3 stereo mini jack cable and connect the other devices to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the project[...]

  • Page 25

    ENGLISH - 25 Chapter 2 Getting Started This chapter describes about things you need to do before using the projector such as the setup and connections.[...]

  • Page 26

    26 - ENGLISH Chapter 2 Getting Started — Setting up Setting up Projection method Y ou can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment. Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear (Using the translucent screen) M[...]

  • Page 27

    ENGLISH - 27 Chapter 2 Getting Started — Setting up Screen size and throw distance Refer to the following gures and table describing projection distances to install the projector . Image size and image position can be adjusted in accordance with the screen size and screen position. 6' / / : /7  / / : /7  6: 6+ + 6+[...]

  • Page 28

    28 - ENGLISH Chapter 2 Getting Started — Setting up Projection distance per projection lens r r When the screen aspect is 16:10 (unit: m) (The dimensions of the following table contain slight error .) Lens type Standard zoom lens Optional lens Fixed- focus lens Ultra-short focus zoom lens Short focus zoom lens Medium focus zoom lens Projection le[...]

  • Page 29

    ENGLISH - 29 Chapter 2 Getting Started — Setting up r r When the screen aspect is 16:9 (unit: m) (The dimensions of the following table contain slight error .) Lens type Standard zoom lens Optional lens Fixed- focus lens Ultra-short focus zoom lens Short focus zoom lens Medium focus zoom lens Projection lens Model No. ― ET -DLE055 ET -DLE080 ET[...]

  • Page 30

    30 - ENGLISH Chapter 2 Getting Started — Setting up r r When the screen aspect is 4:3 (unit: m) (The dimensions of the following table contain slight error .) Lens type Standard zoom lens Optional lens Fixed- focus lens Ultra-short focus zoom lens Short focus zoom lens Medium focus zoom lens Projection lens Model No. ― ET -DLE055 ET -DLE080 ET [...]

  • Page 31

    ENGLISH - 31 Chapter 2 Getting Started — Setting up Projection distance formulas by projection lens T o use a screen size not listed in this manual, check the screen size SD and use the following formula to calculate projection distance. The unit of the calculation result is m. Lens type Projection lens Model No. Aspect ratio Projection distance [...]

  • Page 32

    32 - ENGLISH Chapter 2 Getting Started — Setting up Adjusting adjustable feet Install the projector on a at surface so that the front of the projector is parallel to the screen surface and the projection screen is rectangular . If the screen is tilted downward, the projection screen can be adjusted to be rectangular by adjusting the adjustable[...]

  • Page 33

    ENGLISH - 33 Chapter 2 Getting Started — Removing/attaching the projection lens Removing/attaching the projection lens Attach and remove the projection lens in the same way as a standard zoom lens and optional accessories. Move the projection lens to the home position before replacing or removing the lens ( x page 44). Attention r f Replace the p[...]

  • Page 34

    34 - ENGLISH Chapter 2 Getting Started — Removing/attaching the projection lens 3) Attach the projection lens cover aligning the marking (groove *1) with the tip of the arrow on the projector (*2), and secure the projection lens cover by turning it until groove *1 aligns with the *3 P marking. *3 *2 *1 L LL 3URMHFWLRQOHQVFRYHU A[...]

  • Page 35

    ENGLISH - 35 Chapter 2 Getting Started — Connections Connections Before connecting to the projector r f Before connecting, carefully read the operating instructions for the external device to be connected. r f T urn off the power of all devices before connecting cables. r f Acquire any connection cable necessary to connect the external device to [...]

  • Page 36

    36 - ENGLISH Chapter 2 Getting Started — Connections Connecting example: A V equipment 9&5ZLWKEXLOWLQ 7%& '9'SODHUZLWKDWWDFKHG+'0, WHUPLQDO+'&3 RU %OXUDGLVFSODHU Attention r f Always use one of the following when connecting a VCR. r g A VCR with built-in time ba[...]

  • Page 37

    ENGLISH - 37 Chapter 2 Getting Started — Connections r f The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion cable, but some devices may not project the image properly or function properly . r f The <DVI-D IN> terminal supports single link only . r f For [...]

  • Page 38

    38 - ENGLISH Chapter 3 Basic Operation This chapter describes basic operations to start with.[...]

  • Page 39

    ENGLISH - 39 Chapter 3 Basic Operation — Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord cover is securely xed to the projector to prevent removal of the power cord. Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the power c[...]

  • Page 40

    40 - ENGLISH Chapter 3 Basic Operation — Switching on/off the projector Power indicator Displays the status of the power . Check the <ON (G)/ST ANDBY (R)> status of the power indicator before operating the projector . 3RZHULQGLFDWRU21*67 $1'%< 5! Indicator status Status No illumination or ashing The [...]

  • Page 41

    ENGLISH - 41 Chapter 3 Basic Operation — Switching on/off the projector or higher , turn off the main power , and then turn on the power again. r f If the [PROJECTOR SETUP] menu → [ST ANDBY MODE] ( x page 76) is set to [ECO], there may be a time lag of approximately 10 seconds between turning on the power and starting projection compared to whe[...]

  • Page 42

    42 - ENGLISH Chapter 3 Basic Operation — Switching on/off the projector 3) W ait until the power indicator <ON(G)/ ST ANDBY (R)> of the projector lights in red (and the fan stops) for approximately 170 seconds. 4) Press the <OFF> side of the <MAIN POWER> switch to turn off the power . Note r f Do not turn on the power and projec[...]

  • Page 43

    ENGLISH - 43 Chapter 3 Basic Operation — Projecting Projecting Check the projection lens attachment ( x page 33), external device connection ( x page 35) and power cord connection ( x page 39), and then switch on the power ( x page 40) to start projecting. Select the video for projection, and adjust appearance of the projected image. Selecting th[...]

  • Page 44

    44 - ENGLISH Chapter 3 Basic Operation — Projecting Moving the lens to the home position Perform the following procedure to move the lens to the home position. 1) Press the <LENS> button on the control panel or the <SHIFT> button on the remote control for at least three seconds. 2) While the [HOME POSITION] menu is displayed (for appr[...]

  • Page 45

    ENGLISH - 45 Chapter 3 Basic Operation — Remote control operation Remote control operation Using the shutter function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image temporarily . button 1) Press the <SHUTTER> button. r f The image disappears. r f T[...]

  • Page 46

    46 - ENGLISH Chapter 3 Basic Operation — Remote control operation Switching the input The input for projection can be switched. button 1) Press the input selection (<RGB1>, <RGB2>, <DVI-D>, <VIDEO>, <S-VIDEO>, and <HDMI>) buttons. r f This operation can be also performed by pressing the input selection (<RGB[...]

  • Page 47

    ENGLISH - 47 Chapter 3 Basic Operation — Remote control operation 1) Press the <AUTO SETUP> button. r f [COMPLETE] is displayed when it has completed without any problem. r f This operation can be also performed using the <AUTO SETUP> button on the control panel. Note r f The CLOCK PHASE may shift even if it has completed without any [...]

  • Page 48

    48 - ENGLISH Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu.[...]

  • Page 49

    ENGLISH - 49 Chapter 4 Settings — Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector . Navigating through the menu Operating procedure button 1) Press the <MENU> button on the remote control or the control panel. r f The [MAIN MENU] screen is displayed. (17(5 0$,1?[...]

  • Page 50

    50 - ENGLISH Chapter 4 Settings — Menu navigation 1) Press the <DEF AUL T> button on the remote control.  &2175$67 $'-867 Note r f Y ou cannot reset all the settings to the factory default at once. r f T o reset all the settings adjusted in the sub-menu item to the factory default at a time, perform initialization from the [PROJ[...]

  • Page 51

    ENGLISH - 51 Chapter 4 Settings — Menu navigation Sub-menu item Factory default Page [SYSTEM DA YLIGHT VIEW] [OFF] * 55 [SHARPNESS] [6] 56 [NOISE REDUCTION] [1] * 56 [AI] [ON] 56 [SYSTEM SELECTOR] [YP B P R ] * 57 * Depends on the signal input. Note r f The factory default settings may vary depending on the picture mode. [POSITION] Sub-menu item [...]

  • Page 52

    52 - ENGLISH Chapter 4 Settings — Menu navigation [PROJECTOR SETUP] Sub-menu item Factory default Page [PROJECTOR ID] [ALL] 73 [PROJECTION METHOD] [FRONT/FLOOR] 73 [COOLING CONDITION] [FLOOR SETTING] 74 [HIGH AL TITUDE MODE] [OFF] 74 [LAMP SELECT] [DUAL] 74 [LAMP RELA Y] [OFF] 75 [LAMP POWER] [NORMAL] 75 [ST ANDBY MODE] [NORMAL] 76 [SCHEDULE] [OF[...]

  • Page 53

    ENGLISH - 53 Chapter 4 Settings — [PICTURE] menu [PICTURE] menu Select [PICTURE] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to adjust. [PICTURE MODE] Y ou can switch to the desired picture mode sui[...]

  • Page 54

    54 - ENGLISH Chapter 4 Settings — [PICTURE] menu 3) Press qw to adjust the level. r r Operations and adjustment range Operation Adjustment Range Press w . Increases the brightness of the dark (black) parts of the screen. - 31 - +31 Press q . Reduces the brightness of the dark (black) parts of the screen. [COLOR] Y ou can adjust the color saturati[...]

  • Page 55

    ENGLISH - 55 Chapter 4 Settings — [PICTURE] menu 6) Press the <ENTER> button. r f The [WHITE BALANCE] screen is displayed. 7) Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW]. 8) Press the <ENTER> button. r f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed. 9) Press as to select [RED], [GRE[...]

  • Page 56

    56 - ENGLISH Chapter 4 Settings — [PICTURE] menu 2) Press qw or the <ENTER> button. r f The [SYSTEM DA YLIGHT VIEW] individual adjustment screen is displayed. 3) Press qw to switch [SYSTEM DA YLIGHT VIEW]. r f The setting will change among [OFF], [1], [2] and [3] each time you press the button. r r [SYSTEM DA YLIGHT VIEW] [OFF] No correctio[...]

  • Page 57

    ENGLISH - 57 Chapter 4 Settings — [PICTURE] menu [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal. 1) Press as to select [SYSTEM SELECTOR]. 2) Press the <ENTER> button. 3) Press as to select[...]

  • Page 58

    58 - ENGLISH Chapter 4 Settings — [POSITION] menu [POSITION] menu Select [POSITION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to adjust. [SHIFT] Y ou can move the image position vertically or hori[...]

  • Page 59

    ENGLISH - 59 Chapter 4 Settings — [POSITION] menu r r [ASPECT] [DEF AUL T] Pictures are displayed without changing the aspect ratio of the input signals. [VID AUTO] The projector identies the video ID (VID) embedded in the image signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is ef[...]

  • Page 60

    60 - ENGLISH Chapter 4 Settings — [POSITION] menu Note r f When [ASPECT] is set to [THROUGH], [ZOOM] is not displayed. When [ASPECT] is set to [DEF AUL T] 1) Press as to select [ZOOM]. 2) Press the <ENTER> button. r f The [ZOOM] screen is displayed. 3) Press as to select [MODE]. 4) Press qw to switch [MODE]. 5) Press as to select [INTERLOCK[...]

  • Page 61

    ENGLISH - 61 Chapter 4 Settings — [POSITION] menu [KEYSTONE] Y ou can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. 1) Press as to select [KEYSTONE]. 2) Press the <ENTER> button. r f The [KEYSTONE] screen is displayed. 3) Press as to select the item to adjust. 4) Press qw[...]

  • Page 62

    Chapter 7 Operation al Settings Appendix Glossary Introduction Index Contents TOP 62 How to Scan Documents Configuring the Scan Settings Various Ways to Scan Daily Care Troubleshooting Scanner Overview Operational Settings Clearing the Password Clear the password in the following procedure. 1 Right-click the Sof tware Op eration Panel icon in the n[...]

  • Page 63

    ENGLISH - 63 Chapter 4 Settings — [ADV ANCED MENU] menu Blanking correction Item Operation Adjustment Range Left side of the screen [LEFT] Press w . The blanking zone moves to the right. 0 to 959 Press q . The blanking zone moves to the left. Right side of the screen [RIGHT] Press w . The blanking zone moves to the right. Press q . The blanking z[...]

  • Page 64

    64 - ENGLISH Chapter 4 Settings — [ADV ANCED MENU] menu 7) Press qw to switch [ON]. r f A marker for image position adjustment is displayed. 8) Press as to select [ST ART] or [WIDTH], then press qw to adjust starting point and correction width. r f The green line is the starting point of edge blending adjusted with [ST ART]. The red line is the e[...]

  • Page 65

    ENGLISH - 65 Chapter 4 Settings — [DISPLA Y LANGUAGE] menu [DISPLA Y LANGUAGE] menu Select [DISPLA Y LANGUAGE] from the main menu, and display the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f Press as to select a language, and press the <ENTER> button to set. Changing the displa[...]

  • Page 66

    66 - ENGLISH Chapter 4 Settings — [DISPLA Y OPTION] menu [DISPLA Y OPTION] menu Select [DISPLA Y OPTION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to set. [COLOR MA TCHING] Y ou can correct the co[...]

  • Page 67

    ENGLISH - 67 Chapter 4 Settings — [DISPLA Y OPTION] menu 5) Press the <ENTER> button. r f The [MEASURED DA T A] screen is displayed. 6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter . 7) Press as to select a color , then press qw to adjust the value. 8) Once all the input is completed, press[...]

  • Page 68

    68 - ENGLISH Chapter 4 Settings — [DISPLA Y OPTION] menu [AUTO SIGNAL] Set automatic execution of auto setup. The screen display position or signal level can be adjusted automatically without pressing the <AUT O SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc. 1) Press as to[...]

  • Page 69

    ENGLISH - 69 Chapter 4 Settings — [DISPLA Y OPTION] menu 6) Press qw to switch [DVI SIGNAL LEVEL]. r f The setting will change between [0-255:PC] and [16-235] each time you press the button. r r [DVI EDID] [EDID3] Switch between ne settings for a moving image and for a still image. [EDID1] Select mainly when an external device that outputs mov[...]

  • Page 70

    70 - ENGLISH Chapter 4 Settings — [DISPLA Y OPTION] menu r r [ON-SCREEN DISPLA Y] [OSD POSITION] [2] Set the position of the menu screen (OSD) to the center left of the screen. [3] Set the position of the menu screen (OSD) to the bottom left of the screen. [4] Set the position of the menu screen (OSD) to the top center of the screen. [5] Set the [...]

  • Page 71

    ENGLISH - 71 Chapter 4 Settings — [DISPLA Y OPTION] menu Note r f The startup logo will disappear in approximately 15 seconds. r f T o create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required. [SHUTTER SETTING] Set the opening and closing status of the shutter for when projection begins by switchi[...]

  • Page 72

    72 - ENGLISH Chapter 4 Settings — [DISPLA Y OPTION] menu r r Setting the two window display [VIDEO] Displays images of [VIDEO] input on the right screen (Input B). [S-VIDEO] Displays images of [S-VIDEO] input on the right screen (Input B). [RGB1] Displays images of [RGB1] input on the right screen (Input B). [RGB2] Displays images of [RGB2] input[...]

  • Page 73

    ENGLISH - 73 Chapter 4 Settings — [PROJECTOR SETUP] menu [PROJECT OR SETUP] menu Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to set. [PROJECTOR ID] The projector has an ID n[...]

  • Page 74

    74 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [COOLING CONDITION] Change the fan control depending on the direction of projection. Set [COOLING CONDITION] correctly in accordance with the direction of projection referring to the following gure. It may shorten the life of the lamp if used in incorrect setting. :  [...]

  • Page 75

    ENGLISH - 75 Chapter 4 Settings — [PROJECTOR SETUP] menu operating time of either of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), only the other lamp will light. However , if both lamps do not light, or the cumulative operating time of both of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), the projector will [...]

  • Page 76

    76 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [ECO] Set when high luminance is not required. Note r f When [ECO] is set, the power consumption and operation sound can be reduced while the lamp life can be increased. [ST ANDBY MODE] Set the power consumption during the standby . 1) Press as to select [ST ANDBY MODE]. 2) Press qw to swit[...]

  • Page 77

    ENGLISH - 77 Chapter 4 Settings — [PROJECTOR SETUP] menu 7) Press qw to select hour and minute, and press as or the number (<0> to <9>) buttons to set a time, and press the <ENTER> button. 8) Press as to select [COMMAND]. 9) Press qw to switch [COMMAND]. r f The setting will change among [POWER ON], [ST ANDBY], [SHUTTER] * , [IN[...]

  • Page 78

    78 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [DVI-D] Sets the input to be projected when the projector is switched on to DVI-D. [HDMI] Sets the input to be projected when the projector is switched on to HDMI. [RS-232C] Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal. T o set the communication cond[...]

  • Page 79

    ENGLISH - 79 Chapter 4 Settings — [PROJECTOR SETUP] menu 6) Press qw to switch [GROUP]. r f The setting will change among [A] to [Z] each time you press the button. 7) Press as to select [RESPONSE(ID GROUP)]. 8) Press qw to switch [RESPONSE(ID GROUP)]. r f The setting will change between [ON] and [OFF] each time you press the button. r r [RESPONS[...]

  • Page 80

    80 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1. [LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2. [MAIN VERSION] Displays the main version of the rmware of the projector . [SUB VERSION] Displays the sub version of the rmware of the projector . [NETWORK VE[...]

  • Page 81

    ENGLISH - 81 Chapter 4 Settings — [PROJECTOR SETUP] menu [SUB MEMOR Y] Switches the sub memory . ( x page 85) [SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. ( x page 57) [SYSTEM DA YLIGHT VIEW] Switches the [SYSTEM DA YLIGHT VIEW] setting. ( x page 55) [FREEZE] T emporarily freezes video to be a still image. ( x page 71) [SIDE BY SIDE][...]

  • Page 82

    82 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [LOAD ALL USER DA T A] Load the various setting values saved as a backup in the built-in memory of the projector . 1) Press as to select [LOAD ALL USER DA T A]. 2) Press the <ENTER> button. r f The [SECURITY P ASSWORD] screen is displayed. 3) Enter a security password and press the &l[...]

  • Page 83

    ENGLISH - 83 Chapter 4 Settings — [TEST P A TTERN] menu [TEST P A TTERN] menu Select [TEST P A TTERN] from the main menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f Press qw to switch. [TEST P A TTERN] Displays the test pattern built-in to the projector . Settings of position, size, and other[...]

  • Page 84

    84 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu Select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r r Registered signal status r f A name can be set for each sub memory ( x page 85). r f Memory number: $ :KHQWKHD[...]

  • Page 85

    ENGLISH - 85 Chapter 4 Settings — [SIGNAL LIST] menu Note r f A signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen. Protecting the registered data Registered signals can be protected. 1) Press asqw to select the signal to protect. 2) Press the <ENTER> button. r f The [REGISTERED SIGNAL ST A TUS] sc[...]

  • Page 86

    86 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu T o register the current settings to the list 1) Press qw on the normal screen (when the menu is not displayed). r f The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3) . r f A list of sub memories registered to the signal currently input is d[...]

  • Page 87

    ENGLISH - 87 Chapter 4 Settings — [SECURITY] menu [SECURITY] menu Select [SECURITY] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f When the projector is used for the rst time Initial password: Press awsqawsq in order , and press the &l[...]

  • Page 88

    88 - ENGLISH Chapter 4 Settings — [SECURITY] menu 2) Press qw to switch [DISPLA Y SETTING]. r f The setting will change among [OFF], [TEXT], and[USER LOGO] each time you press the button. r r [DISPLA Y SETTING] [OFF] The text display is disabled. [TEXT] The text display is enabled. [USER LOGO] The picture registered by the user is projected. Note[...]

  • Page 89

    ENGLISH - 89 Chapter 4 Settings — [SECURITY] menu 3) Press as to select [CONTROL P ANEL] or [REMOTE CONTROL]. 4) Press the <ENTER> button. r f The [CONTROL P ANEL] screen or the [REMOTE CONTROL] screen is displayed. 5) Press as to select an item, and press the <ENTER> button. 6) When the confirmation is displayed, select [OK] or [CANC[...]

  • Page 90

    90 - ENGLISH Chapter 4 Settings — [NETWORK] menu [NETWORK] menu Select [NETWORK] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to set. [NETWORK SETUP] Perform the initial setting of the network before[...]

  • Page 91

    ENGLISH - 91 Chapter 4 Settings — [NETWORK] menu r r [NETWORK CONTROL] [WEB CONTROL] Set to [ON] to control with the W eb browser . [PJLink CONTROL] Set to [ON] to control with the PJLink protocol. [COMMAND CONTROL] Set to [ON] to control with the <SERIAL IN>/<SERIAL OUT> terminal control command format ( x page 121). Refer to “Cont[...]

  • Page 92

    92 - ENGLISH Chapter 4 Settings — [NETWORK] menu Name and function of network function parts 1 2 3 1 LAN10/100 lamp (yellow) Lights on when connected to the 100BASE-TX. 2 <LAN> terminal ( 10BASE-T/100BASE-TX ) Used to connect the LAN cable here. 3 LAN LINK/ACT lamp (green) Lights on when connected. Flashes when transmitting/receiving data. [...]

  • Page 93

    ENGLISH - 93 Chapter 4 Settings — [NETWORK] menu Descriptions of items (1) (2) (3) (4) (5) (6) 1 Page tab Switches pages by clicking it. 2 [Status] The status of the projector is displayed by clicking this item. 3 [Projector control] The [Projector control] page is displayed by clicking this item. 4 [Detailed set up] The [Detailed set up] page is[...]

  • Page 94

    94 - ENGLISH Chapter 4 Settings — [NETWORK] menu Error information page When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details. r f The projector may go into the standby status to protect the projector depending on the contents of the error . >2.@RSHUDWLQJ?[...]

  • Page 95

    ENGLISH - 95 Chapter 4 Settings — [NETWORK] menu [Network status] page Click [Status] → [Network status]. The current network setting status is displayed. [Access error log] page Click [Status] → [Access error log]. The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user name[...]

  • Page 96

    96 - ENGLISH Chapter 4 Settings — [NETWORK] menu [Basic control] page Click [Projector control] → [Basic control]. (1) (2) (4) (6) (3) (5) 1 [POWER] Switches the power on/off. 2 [SHUTTER] Switches between use or not use of the shutter function. 3 [OSD] Switches between on (display)/off (no display) of the on-screen display function. 4 [SYSTEM] [...]

  • Page 97

    ENGLISH - 97 Chapter 4 Settings — [NETWORK] menu r f The following setting change screen is displayed by pressing the [Change] button. (1) (2) (3) (4) (5) (6) (7) (8) 1 [PROJECTOR NAME] Enter the name of the projector . Also enter the host name if it is required when using a DHCP server , etc. 2 [DHCP ON]/[DHCP OFF] T o enable the DHCP client fun[...]

  • Page 98

    98 - ENGLISH Chapter 4 Settings — [NETWORK] menu Note r f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Please consult your dealer . [Ping test] page Y ou can check whether the network is connected to the E-mail server , POP server , DNS server, etc. Click [Det[...]

  • Page 99

    ENGLISH - 99 Chapter 4 Settings — [NETWORK] menu [E-mail set up] page Y ou can send E-mail to an E-mail address (maximum two addresses) set in advance when a problem occurs or the cumulative operating time of a lamp reaches a set value. Click [Detailed set up] → [E-mail set up]. (1) (2) (3) (4) (5) (6) 1 [ENABLE] Select [Enable] to use the E-ma[...]

  • Page 100

    100 - ENGLISH Chapter 4 Settings — [NETWORK] menu (11) (10) (9) 9 [E-MAIL ADDRESS 2] Enter the E-mail address to be sent when two E-mail addresses are to be used. Leave it blank when two E-mail addresses are not to be used. 10 Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail address. [MAIL CONTEN[...]

  • Page 101

    ENGLISH - 101 Chapter 4 Settings — [NETWORK] menu Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector T ype : DZ680 Serial No : SH1234567 ----- E-mail setup data ----- TEMPERA TURE WARNING SETUP MINIMUM [...]

  • Page 102

    102 - ENGLISH Chapter 4 Settings — [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(CONFIGURE) === Projector T ype : DZ680 Serial No : SH1234567 ----- check system ----- MAIN CPU BUS [ OK ] F AN [ OK ] INT AKE AIR TEMPERA TURE [ OK ] OPTICS MODULE TEMPER[...]

  • Page 103

    ENGLISH - 103 Chapter 4 Settings — [NETWORK] menu [Administrator] account (1) (2) (3) (4) (5) (6) (7) 1 [Account] Displays the account to change. 2 [Current][User name] Enter the user name before the change. 3 [Current][Password] Enter the current password. 4 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 5[...]

  • Page 104

    104 - ENGLISH Chapter 4 Settings — [NETWORK] menu [Change password] (For user rights) Only the change of password is enabled under the user rights. (1) (2) (4) (3) 1 [Old Password] Enter the current password. 2 [New Password] Enter the desired new password. (Up to 16 characters in single byte) 3 [Retype] Enter the desired new password again. 4 [O[...]

  • Page 105

    ENGLISH - 105 Chapter 4 Settings — [NETWORK] menu [T ools] page Click [T ools] on the control page. 1 2 3 4 5 1 [Control System] Set the information required for communicating with the controller to be connected with the projector . 2 [User Password] Set the user rights password for the RoomView control page. 3 [Admin Password] Set the administra[...]

  • Page 106

    106 - ENGLISH Chapter 4 Settings — [NETWORK] menu [Help] page Click [Help] on the control page. The [Help Desk] window is displayed. 1 1 [Help Desk] Messages can be sent to or received from an administrator who uses Crestron RoomView .[...]

  • Page 107

    ENGLISH - 107 Chapter 5 Maintenance This chapter describes inspection when there are problems, and maintenance methods.[...]

  • Page 108

    108 - ENGLISH Chapter 5 Maintenance — Lamp/T emperature/Filter indicators Lamp/T emperature/Filter indicators Managing the indicated problems If a problem should occur inside the projector , the lamp indicators <LAMP1>/<LAMP2>/ the temperature indicator <TEMP> and the lter indicator <FIL TER> will inform you by lighting[...]

  • Page 109

    ENGLISH - 109 Chapter 5 Maintenance — Lamp/T emperature/Filter indicators T emperature indicator <TEMP> Indicator status Lighting in red Flashing in red (1 time) Flashing in red (3 times) Status W arm-up status Internal temperature is high (warning) Internal temperature is high (standby warning) The cooling fan has stopped. Cause r f Did yo[...]

  • Page 110

    1 10 - ENGLISH Chapter 5 Maintenance — Maintenance/replacement Maintenance/replacement Before maintaining/replacing the unit r f Make sure to turn off the power before maintaining or replacing the unit. ( x pages 39, 41) r f When switching off the projector , make sure to follow the procedures in “Switching off the projector” ( x page 41). Ma[...]

  • Page 111

    ENGLISH - 111 Chapter 5 Maintenance — Maintenance/replacement 2) Dry the air filter unit. r f Let the unit naturally dry off in a well-ventilated place where there is little dust and the unit is protected from direct sunlight. r f Do not dry using drying devices such as dryers. r f When the air lter unit is dry , proceed to the procedure descr[...]

  • Page 112

    1 12 - ENGLISH Chapter 5 Maintenance — Maintenance/replacement Note r f The replacement cycle of the air lter unit varies greatly depending on the usage environment. Lamp unit The lamp unit is a consumable component. Check the lamp usage time in [PROJECTOR SETUP] [ST A TUS] ( x page 79) in the menu and change the lamp periodically . It is reco[...]

  • Page 113

    ENGLISH - 1 13 Chapter 5 Maintenance — Maintenance/replacement 1) Follow the procedures described in “Switching off the projector” ( x page 41) to set the <MAIN POWER> switch to <OFF>, disconnect the power plug from the power outlet, and wait at least one hour , and then check if the lamp unit has cooled down. 2) Remove the lamp u[...]

  • Page 114

    1 14 - ENGLISH Chapter 5 Maintenance — T roubleshooting T roubleshooting Review the following points. For details, see the corresponding pages. Problems Points to be checked Page Power does not turn on. r f Is the power plug rmly inserted into the outlet? ― r f Is the <MAIN POWER> switch turned <OFF>? 41 r f Is the wall outlet su[...]

  • Page 115

    ENGLISH - 1 15 Chapter 6 Appendix This chapter describes specications and after-sales service for the projector .[...]

  • Page 116

    1 16 - ENGLISH Chapter 6 Appendix — T echnical information T echnical information PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer . Control commands The following table lists the PJLink protoco[...]

  • Page 117

    ENGLISH - 1 17 Chapter 6 Appendix — T echnical information Control commands via LAN When WEB control administrator rights password is set (Protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector . r f Y ou can obtain both the IP address and [...]

  • Page 118

    1 18 - ENGLISH Chapter 6 Appendix — T echnical information r r Error response Error message T ermination symbol “ERR1” Undened control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” T imeout or no-acceptable period “ERR5” Wrong data length “ERRA” Password mismatch 4 byte[...]

  • Page 119

    ENGLISH - 1 19 Chapter 6 Appendix — T echnical information r r Error response Error message T ermination symbol “ERR1” Undened control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” T imeout or no-acceptable period “ERR5” Wrong data length “ERRA” Password mismatch 4 byte[...]

  • Page 120

    120 - ENGLISH Chapter 6 Appendix — T echnical information Sync. method Asynchronous Baud rate 9 600 bps Parity None Character length 8 bit Stop bit 1 bit X parameter None S parameter None Basic format T ransmission from the computer starts with STX, then the ID, command, parameter , and ETX are sent in this order. Add parameters according to the [...]

  • Page 121

    ENGLISH - 121 Chapter 6 Appendix — T echnical information Cable specications <When connected to a computer> <When connected multiple projectors> Projector (<SERIAL IN> terminal) 1 NC NC 1 Computer (DTE specications) Projector 1 (<SERIAL OUT> terminal) 1 NC NC 1 Projector 2 (<SERIAL IN> terminal) 2 2 2 2 3 3 3 3[...]

  • Page 122

    122 - ENGLISH Chapter 6 Appendix — T echnical information <REMOTE 2 IN> terminal It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach. Use the <REMOTE 2 IN> terminal on the connecting terminals of the projector to connect t[...]

  • Page 123

    ENGLISH - 123 Chapter 6 Appendix — T echnical information T wo window display combination list Input A Input B RGB1 Still image RGB1 Movie RGB2 Still image RGB2 Movie VIDEO S-VIDEO DVI-D Still image DVI-D Movie HDMI Still image HDMI Movie RGB1 Still image ― ― l l l l l l l l RGB1 Movie ― ― l ― ― ― l ― l ― RGB2 Still image l l ?[...]

  • Page 124

    124 - ENGLISH Chapter 6 Appendix — T echnical information Mode Resolution (Dots) Scanning frequency Dots clock frequency (MHz) Format Plug and play *3 Horizontal (kHz) V ertical (Hz) RGB2 DVI-D EDID1 DVI-D EDID2 DVI-D EDID3 HDMI 1 125 (1080)/60p 1 920 x 1 080 67.5 60.0 148.5 R/Y/H/D ― l ― l l 1 125 (1080)/50p 1 920 x 1 080 56.3 50.0 148.5 R/Y[...]

  • Page 125

    ENGLISH - 125 Chapter 6 Appendix — Specications Specications The following table describes the specications of the projector . Model No. PT -DZ680E PT -DZ680EL Power supply AC 220 V - 240 V 50 Hz/60 Hz Power consumption 730 W (4.0 A) (0.3 W when [ST ANDBY MODE] is set to [ECO], and 8 W when set to [NORMAL]) DLP chips Panel size 17.0 mm ([...]

  • Page 126

    126 - ENGLISH Chapter 6 Appendix — Specications Model No. PT -DZ680E PT -DZ680EL T erminals <RGB 1 IN> terminal 1 set (BNC x 5) RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible[...]

  • Page 127

    ENGLISH - 127 Chapter 6 Appendix — Dimensions Dimensions Units: mm 498 (19-19/32") 77.5 (3-1/16") 20 (25/32") 21 (13/16") 9 (1 1/32") 5 (3/16") 155 (6-3/32") 17 (21/32") 423 (16-21/32") * The above shows the dimensions with the standard zoom lens attached. * Actual dimensions may dif fer depending on t[...]

  • Page 128

    128 - ENGLISH Chapter 6 Appendix — Ceiling mount bracket safeguards Ceiling mount bracket safeguards r f When installing the projector to a ceiling, be sure to use the specied ceiling mount bracket (ET -PKD56H: for high ceilings, ET-PKD55S: for low ceilings). r f When installing the projector , attach the drop-prevention set included with the [...]

  • Page 129

    Index A Accessories ……………………………………… 17 <AC IN> terminal ………………………………… 21 Adjusting adjustable feet ………………………… 32 [ADV ANCED MENU] ……………………… 51, 62 [AI] ………………………………………………… 56 Air lter unit ………………?[...]

  • Page 130

    Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries[...]