Newland HR2180 manual

NLS - HR2180/ HR 2280 High Performanc e Wir eless Hand -he ld 1D/2D Barcode Scanner User Guide HR2180 _ 22 80_UM_EN _V1.1. 1 4[...]

i nlscan.com Notice Make sure you carefu lly read the following inform ation to ensure that your barcode scanner is able to perform at the level for which it is des i gned. 1. All softwar e, including firm ware, furnished t o the user is on a licensed b asis. 2. The right is reser ved to make changes to any sof tware or product to impr ove reliabil[...]

ii nlscan.com Safety precautions – Danger! Be sure to read the f ol lowing safet y precautions c arefully before tryin g to use the barcode scann er for the fir st time. Keep this manual in handy place f or future refer ence. Danger! This sym bol indicates inf ormation that , if ignored or applied incorre ctly, create s the danger of death or ser[...]

iii nlscan.com Safety precautions – Warning ! Warning ! This symbo l indicate s i nformat i on that , if i gnored or appli ed i ncorr ectly, can create the possibility of death or ser ious personal injury. Disassem bly and m odifi cation Never try to disassembl e or modify the unit in any way. High vol tage ins ide creates the danger of electrica[...]

iv nlscan.com Safety precautions – Warning! Lithium - ion b attery  Do not put a batter y in microwave ovens or pressure cooker s. Doing so may cause t he battery to overheat , explode or burst into f lames.  Do not use a bat tery that smells strang e, is overheating, is a st range color, or is a st range shape. Doing so may ca use the batt[...]

v nlscan.com Safety precautions – Caution! Caution ! This symbo l indicat es i nfor mation that, if ignored or appli ed i ncorr ectly, can create the possi bility of personal i njury or m aterial damage. Foreign o bj ects T ak e care to ensure that metal or combustible obje cts are not inserted into the openings of the unit. Such object s create [...]

vi nlscan.com Safety precautions – Caution (Continued) ! Cradle with RS - 232 cable an d a dapt or  K eep the p ower cord aw ay from stoves an d other source s of extreme he at. H ea t ca n mel t the insulation of the power cor d and create the danger o f fire and electrica l shock.  N ever pull on the power cord when unpluggi ng i t. D oin[...]

vii nlscan.com Contents Notice ...................................................................................................................................................... i Safety prec autions – Danger ! ............................................................................................................. ii Safety prec autions [...]

viii nlscan.com Contents UCC/ EA N 12 8 .................................................................................................................................... 38 China Post ........................................................................................................................................... 39 GS1 DataB ar (GS1 Da[...]

1 nlscan.com Technical speci ficatio ns – h andheld unit Model HR2180 HR2280 Dimensio ns Length × W idth × Depth: 17.0 × 7.0 × 8. 3cm Weigh t 201 g Color Gray Battery 1300 mAh Lithiu m - ion batt ery Charge ti m e Fully charge d (>80%) in 3.5 hours Case material ABS + PC Light sourc e LED(622 n m - 628 nm) Scanning an gle 60 °, 65°, 30°[...]

2 nlscan.com Technical specifications – cradle and adaptor Cradle Input v ol tage 5 VDC ± 0.25 V Cable S traight 2. 0m (PS2) / S traight 1.5m ( USB ) / S traight 2.0m ( RS - 232 ) Dimensio ns Length × W idth × Depth: 21 .3 × 9.7 × 7.5 cm Weigh t 189 g (with out cable) Indicator Vi sua l Case material ABS + PC Program ming method Manual (read[...]

3 nlscan.com Default setting for each barcode Code ty pe Re ad enable Ch eck di gi t veri f icat ion Ch eck di gi t transmissi on Min. code length Propriet ary code ID AIM code ID UPC -A √ - √ (12) 2 A ]Em UPC -E √ - √ (8) 2 D ]Em EAN - 13 √ - √ (13) 2 A ]Em EAN -8 √ - √ (8) 2 C ]Em ISBN/ISSN 1 - - - - - - Code 39 √ - √ 1 M ] Am[...]

4 nlscan.com Dimensions[...]

5 nlscan.com Parts of the s canner Handheld unit ① Exi t wi ndow ② Trigger ③ Red LED (Charging in dicator) ④ Communi cation / Charge socket ⑤ Pow er button ⑥ Sound ho l e ⑦ Red L ED ( Not successful tr ansmission); Blu e LED ( P ower); Gr een LED ( Setting ) Cradle ① B button (Reserv ed) ; S button (Upgra de / Reset); P button (U SB[...]

6 nlscan.com Power on, power off handheld unit and c harge battery Power on han dheld unit : Press the power button (se e Parts of the sca nner ) for tw o seconds. Power o ff han dheld unit : Press the power button (se e Parts of the sca nner ) for t wo seconds. Ch arge bat tery: 1. Please charg e the battery before the first tim e of use. The char[...]

7 nlscan.com I nstallation of cradle Note: If any of the bel ow operation i s incorr ect, turn off the pow er immediat ely and chec k the sc anner for any improper c onnections . Go thro ugh all ste ps again. W ith PS2 ca ble 1. Plug one end of the PS2 cabl e to the cradle , one end to PS2 port on PC, and one end to the keyboard. 2. Plug the out pu[...]

8 nlscan.com RF communication as c lusters The s canner u t ili ze 430 .5 ～ 43 2.0 MHz , 43 3 .05 ～ 434.79MHz RF wireles s communi cation with LR - 433 - W PAN wir eless c ommunication prot ocol . LR - 433 - WPAN prot ocol first ti me i ntrodu ces adaptive frequency ho pping tech ni que. With thi s new protoco l , cord l ess sc anner is able to[...]

9 nlscan.com Scanning When the sca nner is scanning pro gramming code s in this manual, en sure the scan line cros ses the symbol as ill ustrated belo w to preve nt scanning oth er (nearby) codes in its area . HR2180: RIGHT WRO NG HR2280: RIGHT WRONG[...]

10 nlscan.com Programming instruction Refer to the next page, the steps of progr amming ar e: 1. Scan the SETUP bar code on the par ameter setting part. 2. Enter the opti on mode by scann i ng the Op tion ba r code . 3. To the right of the option barcode, the necessary alph anumeric inputs are liste d. Scan these alphanum eric entries from the back[...]

11 nlscan.com Keyboard wedge for Cradle Keyboard typ e : As a keyboard interface , the scanner suppor ts most of the popular PCs an d IBM terminals. Keyboard l ayout: The sca nner support s diff erent national ke yboard layout s. Clock period : Accordin g to the PS2 p rotoc ol, the clock is prov i ded by t he device, e.g. keyboar d or scanner, w it[...]

12 nlscan.com Keyboard wedge for Cradle (Con t inued) Keyboard l ayout USA Turkish F Turkish Q French Italian Spanish Slo vak 00* 01 02 03 04 05 06 Clock per iod 60us 70us 80us 90us 100us 200us 00 01 02* 03 04 05 Delay -a fter - com pound - key 0ms 10ms 20ms 40ms 80ms 00* 01 02 03 04 Numeric key Alphabeti c key Numeric key pad Alt+ keypad 00* 01 02[...]

13 nlscan.com RS - 232 interface for Cradle Flow co ntrol: No ne - The commun i catio n only uses TxD and RxD signa ls w ithout any hardware o r software handshak i ng pr otocol . RTS /CTS - If the s canner wants t o send the bar code data to host computer, i t will issue the R TS signal first, wait f or the CTS signal from the host com puter, and [...]

14 nlscan.com RS - 232 interface for Cradle (Continued) SETUP Option bar c ode Option Alpha. entry Flow contro l None RTS/CTS (Hos t idle: Low RTS) RTS/CTS (Hos t idle: High RTS) XON/XOFF ACK/NAK 00* 01 02 03 04 Inter - character delay 0ms 5ms 10ms 20ms 40ms 80ms 00* 01 02 03 04 05 Reserved Response delay 00 - 99 (100ms) 00 - 99 00* Baud rate 300 6[...]

15 nlscan.com USB interface for Cradle USB device type : When the cr adl e is connected t o a PC with a USB cable , it will be identified as a HID keyboard. Keyboard l ayout: Refer to Keyboard layout of Keyboard we dge for Cradle . Host comm. port speed : R efer to Host comm. port speed of Keyb oard wedge for Cr adle . Numeric k ey : Refer to Numer[...]

16 nlscan.com Handheld s ca n & some global settings Scanning mode: Good - read off - The tri gger button mu st be presse d once to act iva te sca nni ng . The light sourc e of scanner st ops scanning when t here is a successful read ing or no code is decoded after t he Stand - by duration elaps ed. Momentary - The trigger bu tton acts as a swi[...]

17 nlscan.com Handheld s ca n & some global settings (Continued) Decoder optim ization : If it is enabled, th e scanner will optim ize the decoder wi th error c orrection. This function is not effective for all type s of barcodes. SETUP Option bar c ode Option A lpha. entry Scanning mod e Good - read of f Momentary Alte rn ate Continue Timeout [...]

18 nlscan.com Visual and aud io i ndication for Handheld unit Power on alert: After power - on the scanner w ill gen erate an alert si gnal to indicate a succe ssful self - test. LED indicat ion: After each successf ul reading, t he LED above the scanner will lig ht up to indicate a good barcode r ead ing. B eeper indication: A fter each su ccessfu[...]

19 nlscan.com RF 433MHz communication setting for Handheld unit Handheld u nit RF c hannel No. : The scanner offers eight di ffer ent radio fre quency channe ls for the data transmis sion between han dheld unit and crad le . Handheld un it ID : Th e scanner offers 16 d ifferent handhe ld unit IDs. Example: t o set a handheld unit t o w ork on ch an[...]

20 nlscan.com RF 433MHz communication setting for Handhel d unit (Continued) Enter sleepi ng mode in t erva l : If it is enabled, the handheld unit will enter sleeping m ode whil e no operation beyond the ti me in terva l define d; the handheld u nit will return to nor mal mode by pull i ng the scanner t rigger. SETUP Option barc ode Option Alpha. [...]

21 nlscan.com RF 433MHz communicatio n setting for Cradle Crad le RF c hannel No. : The scanner offers ei ght diff erent radio frequen cy channels for the dat a transmis sion between han dheld unit and crad le . Bind the first handheld unit ID : Th is setting is used to bind the first ha ndheld unit I D . By this setting, the cradle communi cates w[...]

22 nlscan.com RF 433MHz communication setting for Cradl e (Continued) SETUP Option barc ode Option Alpha. entry Cradle RF c hannel No. ¡ 01 - 08 01 - 08 06* Bind the first h and held unit ID ¡ 01 - 16 01 - 16 01* Join a next handheld unit ID ¡ 01 - 16 01 - 16 01* RF power l evel 10dbm 7dbm 5dbm 0dbm - 5dbm - 10dbm - 15dbm 01* 02 03 04 05 06 07 F[...]

23 nlscan.com UPC -A Read: Format Leading zero Data digit s (11 digits) Check digit Check digit verif i catio n: The check digit i s op tion al. Check digit tr ans .: By setting En able, check digit will be transmitted. Code ID set ting: Code ID is a one - or - two - chara cter string used to represent the symbol upon a succeed i ng readin g. If yo[...]

24 nlscan.com UPC -E Read: Format Leading zero Data digit s (6 digits) Check digits Check digit verification: The check digit is optiona l and made as t he sum of the numerical val ue of the data digits. Check digit tr ans .: By setting En able, check digit will be transmitted. Code ID setting : Refer to Co de ID se tting of UPC -A. Insertion grou [...]

25 nlscan.com EAN- 13 Read: Format Data digit s (12 digits) Check digit Check digit verification: The check digit is optional and made as t he sum of the numerical value of the data digits. Check digit tr ansmission: By sett ing Enable, chec k di git will be transmitted. Code ID setting: Refer to C ode ID setting of UPC -A . I nsertion grou p selec[...]

26 nlscan.com EAN-8 Read: Format Data digit s (7 digits) Check digit Check digit verification: The ch e ck d igi t is optional and mad e as the sum of the numerica l value of the data digits. Check digit tr ans .: By setting En able, check digit will be transmitted. Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: R[...]

27 nlscan.com Code 39 Read: Format ⋆ Data digit s (variable) Check dig it (optional) ⋆ Check digit verification: The check digit is optional and made as the sum m odule 43 of the numerica l value of the dat a digits. Check digit tr ansmission: By sett ing Enable, chec k di git will be transmitted. Max./Min. code length: Each symbo l ogy ha s ow[...]

28 nlscan.com Code 39 (Continued) SETUP Option bar c ode Option Alpha. entry Read Disable Enable 00 01* Check digit verif ication Disable Enable 00 * 01 Check digit t ransmission Disable Enable 00* 01 Max. code l ength 00 - 99 00 - 99 00* Min. code l ength 00 - 99 00 - 99 01* Code ID setting 00 - FF 16 (ASCII) 00 - FF 16 <M>* Insert grou p se[...]

29 nlscan.com Interleaved 2 of 5 Read: Format Data digit s (Variable) Check dig it (optional) Check digit verificati on: The chec k digit is made as the sum module 10 of the nume ri cal val ues o f al l dat a digit s . There are two optional check di gi t algor i thm s: the specified Uniform S ymbology Sp ecification (USS) and th e Optical Product [...]

30 nlscan.com Industrial 2 of 5 Read: Format Data digit s (variable) Check dig it (optional) Max./Min. code length: Refer to Ma x./Min. code length of Code 39 . Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refer to Inser tion group s election of UPC -A. SETUP Option bar c ode Option Alpha. entry Read Disable Ena[...]

31 nlscan.com Matri x 2 of 5 Read: Format Data digit s (variable) Check digit (o ptional) Ch eck digit v er ification: T he chec k digit i s made as the sum module 10 of the nu merical valu es of all data digit s. Ch eck digit t r ansmission: By sett ing Enable, chec k di git w ill be transmitted. Max./Min. code length: Refer to Ma x./Min. code len[...]

32 nlscan.com Codabar Read: Format Start Data digit s (variable) Check digit (opt ional) End Check digit v er ification: T he chec k digit i s made as the sum module 16 of the numerical valu es of all data digit s. Check digit t ransm ission: By settin g Enable, check dig it will be transmit ted. Max./Min. code length: Refer to Ma x./Min. code leng[...]

33 nlscan.com Code 128 Read: Format Data digit s (variable) Check dig it (optional) Check digit v erific ation: The check di gi t is made as the sum module 1 03 of all data digits. Check digit t ransm ission: By settin g Enable, check dig it will be transmit ted. Max./Min. code length: Refer to Ma x./Min. code length of Code 39 . Code ID setting: R[...]

34 nlscan.com Code 93 Read: Format Data digit s (variable) 2 check di gits (optional) Check digit v er ification: T he chec k digit i s made as the sum module 47 of the num eri cal val ues of al l da ta digit s. Check digit t ransm ission: By settin g Enable, check dig it will be transmit ted. Max./Min. code length: Refer to Ma x./Min. code length [...]

35 nlscan.com Code 11 Read: Format Data digit s (variable) Check digit 1 (op tional ) Check dig it 2 (option al) Check digit v erific ation: The check di gi t is prese nted as the sum m odule 11 of all data d i gits. Check digit t ransmission: By setting Enab l e, check dig i t 1 and ch eck di git 2 will be tran smitted upon you r selected check di[...]

36 nlscan.com MSI/Pl essey R ead: Format Data digit s (variable) Check digit 1 (optional) Check digit 2 (optional) Check digit v erif ication: The MSI/Pl essey has one or t wo optional check d igits. There are three methods of ver i fying chec k digi t s, i.e. Mod10, Mod10/ 10 and Mod 11/10. The check digit 1 and che ck digit 2 will be calculate d [...]

37 nlscan.com UK/Plessey Read: Format Data digit s (variable) 2 check di gits (optional) Check digit v erifica tio n: The UK/Plessey has one or two optional check digit s. The check digit 1 and check digit 2 w i ll be calc ulated as the sum modu le 10 or 11 of the data di gi ts. Check digit t ransm ission: By settin g Enable, check dig it will be t[...]

38 nlscan.com UCC/E AN 128 Read: Format Data digit s (variable) Check dig it (optional) Check digit v erific ation: The check di gi t is made as the sum module 1 03 of all data digits. Check digit t ransm ission: By settin g Enable, check dig it will b e transmitt ed. Max. /Min. cod e l ength: Refer to Max./Mi n. code len gth of Code 39 . Code ID s[...]

39 nlscan.com China Post Read: Format 11 Data digits Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refer to Inserti on group s election of UPC -A. SETUP Option bar c ode Option Alpha. entry Read Disable Enable 00 01* Reserved Reserved Reserved Reserved Code ID setti ng 00 - FF 16 (ASCII) 00 - FF 16 <T>* Ins[...]

40 nlscan.com GS1 DataBar (GS1 DataBar Truncated) GS1 Data Bar Truncated is structured an d encoded the sam e as the standard G S1 DataBar form at, except its heig ht is reduced to a 13 modules minimum; while GS1 DataBar should have a he ight greater than or equal t o 33 modules. Read: Format 16 Data digit s Code ID setting: Refer to C ode ID setti[...]

41 nlscan.com GS1 DataBar Limited Read: Format 16 Data digit s Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refe r to Inserti on group selection of UPC -A. Conversion : Refer to Conversion of GS1 Data Bar (GS1 DataBar Truncated) . SETUP Option bar c ode Option Alpha. entry Read Disable Enable 00 01* Code ID sett[...]

42 nlscan.com GS1 DataBar Expanded Read: Format Data charact ers (variable) Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refer to Inser tion group s election of UPC -A. Conversion : UCC/ EAN 128 - Refer to Code ID tra nsm iss ion of String transmis sion , ]C m will be id entified as AIM ID. SETUP Option bar c od[...]

43 nlscan.com PDF417 (HR2280 model only ) This decoder i s only applied w ith a specified firm ware. The symbol si ze in the standard of PDF417 says, number of rows: 3 to 90, and number of columns: 1 to 30. This scanner can onl y decode PDF417 at rows from 3 to 40 and col umns from 1 to 20. The error correction level f or a PDF417 sym bol is from 0[...]

44 nlscan.com China Finance (HR2280 model only) Note: This ty pe of barcod e i s not Omni - d i rect i onal ly deco dable. The enc odable chara cter set include s numeric 0 t o 9. Among the symb ol of 0 to 9, 0 and 2, 4 and 9, 5 and 8, 6 and 7, have t he symmetric al pattern; the pattern of 1 and 3 is sym metrical. Read: Format 10 Data digits Max./[...]

45 nlscan.com China Finance (Continued) SETUP Option bar c ode Option Alpha. ent ry Read Disable Enable 00 01* Max. code l ength 00 - 99 00 - 99 10* Min. code l ength 00 - 99 00 - 99 10* Check digit verif ication Disable Reserved 00* 01 Leading charact er 5/6/7/8/9 converted to A/B/C /D/E Disable Enable Only 5 con v erted t o A Only 6 con v erted t[...]

46 nlscan.com QR Code (HR2280 model only) Read: Format Data charact ers (variable) Code ID setting: Refer to C ode ID setting of UPC -A. SETUP Option bar c ode O ption Alpha. entr y Read Disable Enable 00 01* Code ID setting 00 - FF 16 (ASCII) 00 - FF 16 < E >* Reserved END[...]

47 nlscan.com Aztec (HR2280 model only ) Read: Format Data charact ers (variable) Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Re fe r to In sertion group select ion of UPC -A. SETUP Option bar c ode O ption Alpha. entry Read Disable Enable 00 01* Code ID setting 00 - FF 16 (ASCII) 00 - FF 16 < F >* Reserv[...]

48 nlscan.com DataMatrix (HR2280 model only) Read: Format Data charact ers (variable) Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refer to Inserti on group s election of UPC -A. SETUP Option bar c ode O ption Alpha. entry Read Disable Enable 00 01* Code ID setting 00 - FF 16 (ASCII) 00 - FF 16 < W >* Rese[...]

49 nlscan.com HanXin Code (HR2280 model only) Read: Format Data charact ers (variable) Code ID setting: Refer to C ode ID setting of UPC -A. Insertion grou p selection: Refer to Inserti on group s election of UPC -A. SETUP Option bar c ode O ption Alpha. entry Read Disable Enable 00 01* Code ID setting 00 - FF 16 (ASCII) 00 - FF 16 < J >* Res[...]

50 nlscan.com G1- G6 & FN1 subs t itution s tring setting Format of barco de data transmissi on P refi x Code n ame Preambl e Code ID Code l ength Code data Code ID Postamble S u ffi x Suffix string s etting: Th e < enter > key is repres ented in dif ferent ASCII when it is applied by different OS. For a W indows/DO S OS, <enter> i [...]

51 nlscan.com G1- G6 & FN1 subs t itution s tring setting (Continued) Testing barc ode : FN1 s u bstitution string setting: The FN1 char acter (0x1D) in an UCC/EAN12 8 barcode, or a Code 12 8 barcode, or a GS1 DataB ar barcode can be subst ituted with a defi ned string. Truncate lead ing G 5 str ing setting: By setti ng, a defined leading chara[...]

52 nlscan.com G1- G6 & FN1 subs t itution s tring setting (Continued) SETUP Option bar c ode Option Alpha. entry Prefix string sett ing 0- 22 characters None 00 - FF 16 00* Suffix string sett ing 0- 22 characters <ENTER> 00 - FF 16 0A 0D* Preamble strin g setting 0- 22 characters None 00 - FF 16 00* Postamble str ing setting 0- 22 charact[...]

53 nlscan.com G1- G4 string position & Code ID po s ition Format of barco de data transmissi o n P refi x Code n ame Preambl e Code ID Code l ength Code data Code ID Postamble S u ffi x Insert G1/G2 /G3/G4 st ring position: The scan ner offers 4 pos itions to insert strings among the s ymbol. In case of the insert ion position is greater than t[...]

54 nlscan.com String transmission Note: The informatio n in this chapter is c losely related t o the chapter of Str ing setting. Format of barco de data transmissi on P refi x Code n ame Preambl e Code ID Code l ength Code data Code ID Postamble S u ffi x Preamble tr ansmission: By se tting Enable, p re amble will be appen ded before t he data tran[...]

55 nlscan.com String transmission (Cont inued) SETUP Option bar c ode Option Alpha. entry Prefix transmissio n Disable Enable 00* 01 Suffix transmissio n Disable Enable 00 01* Code name transm is sion Disable Enable 00* 01 Preamble tr ansmission Disable Enable 00* 01 Postamble t ransmission Disable Enable 00* 01 Code ID tra nsmission Disable Propr [...]

56 nlscan.com Test Chart UPC -A UPC -E EAN -8 EAN - 13 Code 39 Code 32 A908765439 Code 128 Interleave d 2 of 5 Industria l 2 of 5 Matrix 2 of 5 Code 93 UC C/EAN 128 Code 11[...]

57 nlscan.com Test Chart (Continued) MSI/Pl essey UK/Plessey ISBN/ISSN China Post GS1 DataBar ( GS1 DataBar Tr uncated) GS1 DataBar L imited GS1 DataBar E xpanded PDF 417 01Az+ -= MicroPDF417 23+ - mdo[...]

58 nlscan.com Test Chart (Continued) QR Co de 01234567 89 Aztec 01AZ[+ - * / ]za98 DataMatri x 01234567 89 Hanxin Code 百度百科[...]

59 nlscan.com Troubleshooting Problem Possible cau ses Po ssi ble so lu ti ons Nothing happ ens when you follow the o perating instruct i ons, or t he scanner displays er ratic behavior. No power t o the scanner. Check the syst em power. Ensur e the power supply is conn ected. Incorrect ca bles. Use the orig i nal ca bl es. Connect i ons are loose.[...]

60 nlscan.com Maintenance Cleaning the exit window is the only mainte nance required. A dirty window ma y affect scanning accuracy. 1. Do not allow a ny abrasive mat erial to touch the wind ow . 2. Remove a ny di rt part icles with a damp cloth . 3. Wipe the wind ow using a tissue moi stened with wate r . 4. Do not spray w ater or other clea ning l[...]

61 nlscan.com ASCII t able for key board wedge for RS -232 H L 0 1 0 1 0 Null NU L D LE 1 Up F1 SOH DC1 2 Down F2 S TX D C2 3 Le f t F3 ETX DC3 4 Right F4 EOT D C4 5 PgUp F5 ENQ NAK 6 PgDn F6 ACK SYN 7 F7 BEL ETB 8 Bs F8 BS CAN 9 Ta b F9 HT EM A F10 LF S UB B Hom e Esc VT ESC C End F 11 FF FS D Enter F12 CR GS E Insert C trl+ SO RS F Delete Alt+ SI[...]

62 nlscan.com Return default parameters & version WARNI NG : Handhe ld unit default value initia l izatio n If you wish to ret urn the handhe l d unit to the entire factory def ault settings, scan t he barcode above. WARNI NG : Crad le d efault value initialization ¡ If you wish to ret urn the cradle to the entire factory default set tings (ra[...]

63 nlscan.com Configuration alphanumeric e ntr y barcode[...]

Headquarters Fuji an N ew land A uto - ID Tech. Co ., Lt d. Newland Science & Techno logy Park No.1 Rujia ng Wes t Rd., Mawe i , Fuzhou, Fujian 3500 01, China TEL: 86 - 591 - 83979219 WEB: www .nlscan.co m AsiaPac Office New la nd Tai w an Co., Ltd. 7F. - 6, N o.268, L iancheng R d., Zhonghe City, T aipei County , Taiwan TEL: +8 86 -2 - 7731538[...]