NEC NDA-24233 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of NEC NDA-24233, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of NEC NDA-24233 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of NEC NDA-24233. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of NEC NDA-24233 should contain:
- informations concerning technical data of NEC NDA-24233
- name of the manufacturer and a year of construction of the NEC NDA-24233 item
- rules of operation, control and maintenance of the NEC NDA-24233 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of NEC NDA-24233 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of NEC NDA-24233, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the NEC service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of NEC NDA-24233.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the NEC NDA-24233 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    NDA-242 33 ISSU E 2 STOCK # 02 93886 Engineering Guide JANUARY, 19 99 NEC America, Inc . VisuaLink 128/384[...]

  • Page 2

    LIABILITY DISCLAIMER NEC Amer ica, Inc. reserves the righ t to change th e specif ications, function s, or fea tures, at any time, without noti ce. NEC Amer ica, Inc . has prep ar ed thi s docum ent for use by i ts em- ployees and cus tomers. The inf ormation conta ined her ein is t he property o f NEC Ameri ca, Inc. and s hall not be r eproduced w[...]

  • Page 3

    EXHIBIT J1 FCC REQUIREMENTS NEC Am e r i ca, Inc . V isuaLink 12 8/V isuaLink 3 84 TYPE OF SER VICE The V isuaLin k 128 and the V isuaLin k 384 ar e stand-a lone de vices tha t allow mul timedia co nfere ncing by transmi tt ing vid eo, a udi o and dat a t o r emote lo cat ions ov er the ISDN Basic Rat e in te rf ace . The V isuaLink 1 28 and V isua[...]

  • Page 4

    IF PROBLEMS ARISE If any of your tel ephone equipment i s not oper ating properly , you should i mmediate ly remov e it from y our telepho ne lines , as it may cause har m to the te lephone ne twork. If the tele phone company notes a p roblem, the y may temp orarily disconti nue ser vice. When pr actical , they will noti fy you in ad vance of t his[...]

  • Page 5

    CSA Requ ire ment T o ensure that ce rtif ied equip ment is attached corre ctly , and only to the networ ks of pa rticipa ting car riers, t he followi ng state ment sh all acco mpany eac h unit of cer tified equipment o f fered f or sale. This s tatement must be include d conspicu ously i n writte n or elect ronic format, at or near t he fr ont of [...]

  • Page 6

    [...]

  • Page 7

    NDA-24233 Issue 2 Page i V isuaLink 128 /384 Eng ineering Gui de T able of C ontents T able of Contents Chapter 1: Visua Link Command Fundamentals .............. .......... .............. .............. 1-1 Summar y ..... ...... ........... ......... ....... ........... ......... ...... ......... ....... .... ....... ........... ......... ...... ..[...]

  • Page 8

    Page ii NDA-24233 Is sue 2 T able of C ontents V isuaLink 128/3 84 Engin eering Gui de DATA Command .... .. ....... .. ....... .. ....... .. ....... .. .. ....... .. ....... .. ......... ........ .. . ........ . ........ .. ....... .. . 3-1 9 SDM2 Setting LSD Speed 4-1 . ........... .. . 3-19 RDM2 Checking LSD Speed Setting 4-2 ............... 3-20[...]

  • Page 9

    NDA-24233 Issue 2 Page iii V isuaLink 128 /384 Eng ineering Gui de T able of C ontents Report Response Contr o l Command ............ .......... ....... .. .. ....... .. ....... .. ....... .. ....... .. .. ....... .. 3-43 ITCS Conference St atus Rep ort Contro l 14-1 ...... ....... 3-43 IMCU Multi-point Confer ence Status Report Contr ol 14-2 .....[...]

  • Page 10

    Page iv NDA-24233 Is sue 2 T able of C ontents V isuaLink 128/3 84 Engin eering Gui de Alarm Status Report Command ................... .. .. .. . ........... .. .. .. .. .. . ........... .. .. .. .. . ........... .. .. .. .. . 3-65 RALM Alarm Status Change Report (1 of 2) 26-1 .......... .. . 3-65 RALM Alarm Status Change Report (2 of 2) 26-1 .....[...]

  • Page 11

    NDA-24233 Issue 2 Page v V isuaLink 128 /384 Eng ineering Gui de T able of C ontents Chapter 4: Error Re sponse Table . ......... .......... .............. ......... ......... .............. .......... 4-1 Chapter 5: List of Fac tors for Disconnection in Table .................. .............. .......... 5-1 Appendix A: Pin-out Spe cification .....[...]

  • Page 12

    NDA-24233 Issue 2 Pa ge vi V isuaLin k 128/384 En gin eering Guide List of T abl es List of T ables Table 1: VIDEO Command .................................................................................................... 2-1 Table 2: AUDIO Command ...................................................................................................[...]

  • Page 13

    NDA-24233 Issue 2 Page 1-1 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 Chap te r 1: V isuaLi n k C om ma nd Fu nd a m en ta l s Pr eface Thank you ve ry much f or pur chasing t he V isuaLink 12 8 or V isuaLin k 384. V isuaLink i s suitab le for a confer ence with o ne to thre e peopl e on a sit e, and it i s a devic e to real ize a multimedi a[...]

  • Page 14

    Page 1-2 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de 1.3 P h ysi ca l/E l ectr ical l nte rf ace The ext ernal control port is a t the b ack of the V isuaLink and uses DIN8 p in connec tors. The maxi mum length of the c ontrol ca ble sh all be no mor e than 20 f t. (6.1 meter) due to elect ric c haracter istics . Connect or[...]

  • Page 15

    NDA-24233 Issue 2 Page 1-3 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.4 Communicati on Format Communicati on between a consol e and V isuaLi nk 128/3 84 is done i n a start -stop sy nchroni zation of the follo wing fo rmat . Data Format Data Lengt h: 7, 8 bi t ASCII code Stop Bit: 1 bit Parity: Even, Odd, NONE par ity Baud: 1200, 2400, 4800[...]

  • Page 16

    Page 1-4 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de Command Format Command: Tr ansmit 4- charac ter commands (only upper case can be u sed) Space: More t han one spac e is tra nsmitted b etween a command and a pa ramete r Parame ter: If a command requi res a p arameter , a parameter is assi gned. (Onl y upper ca se can be [...]

  • Page 17

    NDA-24233 Issue 2 Page 1-5 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.5 Communicati on Pr ocedur e There is no proc edure for communicati on between a consol e and V isuaLi nk as a rul e. There fore, a comm un ica ti on l in e is pr esum ed to be erro r-f re e. W he n it is remote ly o pe rated with a mode m, efficie nt operati on may not b[...]

  • Page 18

    Page 1-6 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de (1) C ommand 1 i s iss ued usi ng the exte rnal contro l port ra ther than a p ersona l comput er . (2) I f a re port is r eceiv ed fro m the re mote uni t befo re a tr ansmis sion of Com mand 1, i t transm its a r eport to a PC a n d then tran s mits Comm and 1 to the re[...]

  • Page 19

    NDA-24233 Issue 2 Page 1-7 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.6 Connect ing and Inc oming Call Cont rol Basic Sequenc e Connecti ng and i ncoming cal l control basic se quence (w hen the i ncoming c all mode of the V isuaLin k receiv ing a ca ll i s set to t he ma nual i ncoming c all set ting) is shown in the fo llowin g. Note 1: D[...]

  • Page 20

    Page 1-8 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de This page is for yo ur note s.[...]

  • Page 21

    NDA-24233 Issue 2 Page 2-1 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 Chapter 2: Console Command List T able 1: VIDEO Command T able 2: AUDIO Command T a ble 3: LINE Setting Comma nd NO F eature Command Name Pr oce ss 1-1 Se tting Video F ormat SVFM Settin g 1-2 Ch ecking V ideo Form at Sett ing R VFM St atu s 1-3 Set ti ng Pic ture -in- P ic[...]

  • Page 22

    Page 2-2 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T able 4: DA T A Command T a ble 5: ISDN Registe ring/Sett ing Command T able 6: Camera r elat ed Registerin g/Sett ing Command T able 7: Communication St atus Reading Co mmand T able 8: Alarm r elated Co mmand T able 9: Histo ry Reading Command NO F eature Command Name P[...]

  • Page 23

    NDA-24233 Issue 2 Page 2-3 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 T a ble 10: Registerin g Local Loc ation Name Command T able 1 1: Serial Port Cont rol Command T able 12: Acqui ring V ersion Command T able 13: Ma intenance Command T able 14: Report Respons e Contr ol Command T able 15: Mainte nance and Other Command T able 16: Mainte nan[...]

  • Page 24

    Page 2-4 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T able 17: Model Iden tifica tion Command T a ble 18: Audio T raining Command T a ble 19: ISDN Contr ol Command T a ble 20: Camera Contr ol Command T a ble 21: Option Contr ol Command T able 22: Multi- point Con fere nce Contr ol T a ble 23: Opening Message Command NO F e[...]

  • Page 25

    NDA-24233 Issue 2 Page 2-5 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 T a ble 24: Communication Stat us Report Command T able 25: Ala rm Status Report Command T able 26: V ideo Status Report Command T able 27: Part icipa ting Status Repo rt Command T a ble 28: ISDN - Report Command T a ble 29: Camera Contr ol Report Command T able 30: Opti on[...]

  • Page 26

    Page 2-6 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T a ble 32: Multi-point Re lated Report Command T able 33: Multi-Scr een Rel ated Report Co mmand T able 34: Mi crop hone Command T able 35: Syst em Err or Command T able 36: On-Sc r een Display T able 37: Curr en t Power OFF Condit ion NO F eature Command Name Pr oce ss [...]

  • Page 27

    NDA-24233 Issue 2 Page 3-1 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List Chapter 3: Command Detailed Format Command detai ls are de scri bed in thi s sectio n accordin g to th e followi ng format. Command Name Command Num ber Desc rip tio n: Describe command fe atures. Command Format: Describe command in put fo rmat. Resp onse : De[...]

  • Page 28

    Page 3-2 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.1 VIDEO Commands SVFM Setting Video Format 1-1 RVFM Checking Video Format Setting 1-2 Desc riptio n: This sets v ideo fo rmat. V isuaLi nk 128/384 i s equipped with a f eature t o code acti ve video with kinds of r esoluti on. The formats a r e QCIF and CIF ([...]

  • Page 29

    NDA-24233 Issue 2 Page 3-3 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SPIP Setting Pic ture-in-Pic ture 1-3 RPIP Checking Pi cture-i n-Picture Setting 1-4 Desc riptio n: Sets PIP (smal l scree n) dis play Command Format: SPIP p1 p2 p1: ON : PIP output ON OFF : PIP output OFF P2: R T : Displ ay at top right RB : Display a t botto[...]

  • Page 30

    Page 3-4 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SSND Setti ng V ideo I nput Switc h 1-5 RSND Checking Video Input Setting 1-6 Descript ion: This sets v ideo input switch. Command Format: SSND p1 p2 p1: L : loca l site R : remote sit e p2: C1 : Camera 1 C2 : Came ra 2 Response: Nor m al Respo nse : OK Error R[...]

  • Page 31

    NDA-24233 Issue 2 Page 3-5 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SDSP Setting Mo nitor Ou tput V ideo 1-7 Note: User will be unable to switch to STILL PICTURE if STILL PICTURE gr aphics has not been s ent. RDSP Checki ng Moni tor Outp ut V ideo Se tting 1-8 Desc riptio n: Sets output video im age. Command Format: SDSP p1 p1[...]

  • Page 32

    Page 3-6 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SPDP Setting/Checking PIP Display Format 1-9 SPSW Setting/Checking PIP Image when Snapshot is V iewed 1-10 Desc riptio n: Setting the displ ay imag e seen i n the picture- in-pi cture (PIP) wind ow . Command Format: SPDP [p1] p1: M : mir ror im age is dis playe[...]

  • Page 33

    NDA-24233 Issue 2 Page 3-7 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SCPI Settin g/Che ckin g V ideo Prio rity 1-1 1 S263 Setting H.263 1-12 Descript ion: The V isuaLink has a functi on to au tomati cally opti mize th e pict ure qualit y , (e.g., number of frames , resolut ion, codin g, noise, et c.). In l ow bit rate coding t [...]

  • Page 34

    Page 3-8 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide R263 Checking H.263 Setting 1-13 Desc riptio n: Reporting t he current sett ing by S263 c ommand Command Format: R263 Response: Nor mal Respo nse: p1 OK p1: ON : H.263 av ailable OFF : H.263 not av ailable Error Res ponse: ERR01 ERR07 ERR14 ERR21 ERR87[...]

  • Page 35

    NDA-24233 Issue 2 Page 3-9 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.2 AUDIO Command SAMD Setting Au dio Mode 2-1 RAMD Checking Au dio Mode Set ting 2-2 Descript ion: Sets the aud io coding f ormat. The Vi suaLin k is capab le of µ -La w PCM, SBADPCM and LP-CELP. Command Format: SAMD p1 p1: OFF : OFF ULW : G711 ( µ -Law PCM[...]

  • Page 36

    Page 3-10 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SADL Setting Audio Delay 2-3 Descript ion: Sets audio d elay (li p sink). De lay is gen erate d when video is code d in transmi ssion, and the amount of del ay differ s depending on a transmissi on speed. On the c ontrary, audio coding del ay is about 1/ 1000 [...]

  • Page 37

    NDA-24233 Issue 2 Page 3 -11 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RADL Checking Au dio Mode Setting 2 -4 SMIC Setti ng MIC ON /OFF 2-5 Desc rip tio n: C heck s the curre nt a udio dela y sett ing Command Format: RADL p1 p2 p1: 64 : 56/64 kpbs 2x64 : 2x56/2x64 kbps 3B : 168/192kbps 4B : 224/256kbps 5B : 280/320kbps 6B : 336[...]

  • Page 38

    Page 3-12 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RMIC Checking MIC ON/OFF Setting 2-6 SVOL Setting V olu me 2-7 R VOL Checkin g V olume Setting 2-8 Descript ion: Checks the cu rrent micr ophone setting Command Format: RMIC Response: Normal Respo nse: p1 OK p1: ON : MIC ON OFF : MIC OFF Error Res ponse: ERR01[...]

  • Page 39

    NDA-24233 Issue 2 Page 3 -13 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SASW Se tting Aud io Inp ut/Outp ut Port 2-9 RASW Checking Audio Input/Output Port Setting 2-10 Descript ion: Sets the aud io input p ort an d output por t. Command Format: SASW p1 p1: LINE : LINE HEAD : Headse t TEL : Telep hone AUTO : Automatic Response: N[...]

  • Page 40

    Page 3-14 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SMMT Sets Audio or Audio/V ideo Outgoing Mute Setting 2-1 1 RMMT Checking Audio or Audio/V ideoOutput Mute Setting 2-12 Descript ion: Sets whether th e audio or audio a nd vide o outgoing i s muted or unmuted at th e st art o f commu nic ati on when the Vis ua[...]

  • Page 41

    NDA-24233 Issue 2 Page 3 -15 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SMTC Sets Audio or Audio/V ideo Mute Setting 2-13 RMTC Checking Audio or Audio/V ideoOutput Mute Setting 2-14 Descript ion: Sets whether th e audio or audio a nd vide o outgoing i s muted or unmuted at th e st art o f commu nic ati on when the Vis uaLi nk au[...]

  • Page 42

    Page 3-16 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.3 LINE Sett ing Command SNET Setting Netw ork T ype (P x 64/56) 3-1 Note: The co mmand can onl y be i ssued when t he VisuaLink is not in a cal l. RNET Checking Network T ype Setting (P x 64/56) 3-2 Descript i on: Sets a network ty pe ( P x 64/ 56) . Some n [...]

  • Page 43

    NDA-24233 Issue 2 Page 3 -17 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NNSS Setting Transmission Line Type 3-3 Note: High Sp eed dig ital bas ic le ased line s are c urren tly only a vaila ble in Japan. NNSI Checking Transmission L ine Type Setting 3-4 Descript ion: Sets the li ne inter face: Hi gh speed di gital bas ic le ased[...]

  • Page 44

    Page 3-18 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SLSP Se ttin g Trans missi on Line Spee d 3-5 RLSP Checking Transmission Line Speed Settin g 3-6 Note: The res ponse will always be a 64 kbps incr ement. It is recommended that th e RNET command be used combined wi th RLSP. Desc rip tio n: S ets t ransm issi o[...]

  • Page 45

    NDA-24233 Issue 2 Page 3 -19 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.4 DA T A Command SDM2 Setting LSD S peed 4-1 Desc riptio n: Setting Low Spe ed Data (LSD) port speed • Allows for H.28 1 far-end camera c ontrol • PC-to-PC data transmis sion Command Format: SDM2 p1 p1: OFF : OFF 1.2 : 1.2 kbps 4.8 : 4.8 kbps 6.4 : 6.4[...]

  • Page 46

    Page 3-20 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RDM2 Check ing LSD Sp eed Sett ing 4-2 SDM3 Setting ML P Speed 4-3 Descript ion: Report ing the c urrent LSD speed by S DM2 command Command Format: RDM2 Response: Nor mal Respo nse: p1 OK p1: OFF : OFF 1.2 : 1.2 kbps 4.8 : 4.8kbps 6.4 : 6.4 kbps 9.6 : 9.6 kbps[...]

  • Page 47

    NDA-24233 Issue 2 Page 3 -21 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RDM3 C heckin g MLP Spee d Setti ng 4-4 Descript ion: Checks the cu rrent MLP speed set ting. Command Format: RDM3 Response: Normal Respo nse: p1 OK p1: OFF : OFF 4.0 : 4.0 kbps 6.4 : 6.4 kbps 14.4 : 14.4 kbp s 24.0 : 24.0 kbp s Error Res ponse: ERR01 ERR07 [...]

  • Page 48

    Page 3-22 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.5 ISDN Regis tering/S ettin g Command NDSS Registering My Num ber 5-1 Descript ion: Reg iste rs a l ocal dial n umber. I n a communi cati on, a l ocal d ial n umber is repo rted t o the remo te sit e at a call origi natio n. Th e lo cal n umber to r eport at[...]

  • Page 49

    NDA-24233 Issue 2 Page 3 -23 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NDSR Checking My Number Registration 5-2 Descript ion: Checks the current loca l dial number se tting. In a communi cation, a loc al dial number is reported to the r emote site at a call or igina tion. This is used to check a loca l dial numbe r set by a NDS[...]

  • Page 50

    Page 3-24 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide MDST Registering Sp eed Dial 5-3 Descript ion: Visua Link can registe r a maximu m of 130 s peed dial numbers. A dial number that can b e regist ered shal l be 20- digit a t a maximu m with a sub address of a maxi mum of 8 digit s, and a line spe ed must be s [...]

  • Page 51

    NDA-24233 Issue 2 Page 3 -25 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List MDRD Checking Speed Dial Registration 5-4 Desc rip tio n: C heck s the curre nt r egist ers s pee d dia l num ber. Command Format: MDRD p1 p1: #xxx: speed dia l number (xxx: spee d number) Response: Normal Response : p1 p2 p 3 p4 p5 OK p1: #xxx : speed dial [...]

  • Page 52

    Page 3-26 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NBZS Settin g Incoming Cal l Buzzer 5-6 Note: This command is ineffect ive whe n settin g incomi ng mode is set to Aut omatic . Utilize this com mand only in th e M anu al An swer mode . NBZI Checking Incoming Call Buzzer S etting 5-7 Descript ion: Sets the in[...]

  • Page 53

    NDA-24233 Issue 2 Page 3 -27 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SINC Setting Incoming C all Mode 5-8 Descript ion: Sets th e incoming call mod e. There are three ways t o receive an incoming call: manual i ncoming cal l mode, automa tic i ncoming cal l mode, and select ive in coming call mode. In a man ual in coming call[...]

  • Page 54

    Page 3-28 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SRNG Setting/Checking Incoming Call Buzzer at Auto Answer Mode 5-9 SPID Registerin g SPID 5-10 Desc riptio n: Setting ri nging ti mes of i ncoming call buzzer i n auto answer mode or select ive an swer mode Command Format: SRNG [p1] p1: 0 -9 : 0: n ot ri nging[...]

  • Page 55

    NDA-24233 Issue 2 Page 3 -29 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RPID Checking SPID 5-11 Desc rip tio n: R epor ting curre nt S P ID Command Format: RPID p1 p1: L11 : Line1 Channel1 L12 : Line1 Chann el2 L21 : Line2 Chann el1 L22 : Line2 Chann el2 L31 : Line3 Chann el1 L32 : Line3 Chann el2 Response: Normal Respo nse: p1 [...]

  • Page 56

    Page 3-30 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.6 Camera Rel ated Regist ering/Set ting Command CPPS Registering Camera Prese t Position 6-1 CPNS Registering Talker Name 6-2 Descript ion: Regis ters a ca mera pr eset posi tion. Command Format: CPPS p1 p2 p3 [p4] p1: L1-2 : Local Camera Number R1-2 : Remot[...]

  • Page 57

    NDA-24233 Issue 2 Page 3 -31 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SCMK Setting Camer a Model 6-3 RCMK Checking Cam era Mode l Setting 6-4 Descript ion: Sets types of camera whi ch will be controll ed. Command Format: SCMK p1 p1: S : EVI-D3 0 C : VC-C1 Response: Normal Response: OK Error Res ponse: ERR01 Descript ion: Check[...]

  • Page 58

    Page 3-32 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.7 Communicati on Status Re ading Command RMAC Read Manuf acturer Code 7-1 Desc ri ptio n : Ac qu ire s ma nufa cture r code of a re mote si te. Command Format: RMAC Response: Normal Respo nse: p1 p2 p 3 p4 p5 OK p1: 00-FF : Manufactu rer code 49: NEC Else: o[...]

  • Page 59

    NDA-24233 Issue 2 Page 3 -33 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RMOD Read Comm on Mode During Communication 7-2 Descript ion: Reads negoti ated para meter s etting. Command Format: RMOD Response: Normal Respo nse: p1 p2 p 3 p4 p5 p6 p7 p8 OK p1: 64 : 56/64 kbps 2x64 : 2x56/ 2x64 kbps 192 : 168/1 92 kbps 256 : 224/2 56 kb[...]

  • Page 60

    Page 3-34 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide R221 Read H.221 Synchronous Status 7-3 RPNA Read Remote S ite Name (at Poin t-to-Point) 7-4 Descript ion: This reads a status o f the H. 221 frame sp ecifi ed in ITU-T Recommendati on Command Format: R221 Response: Normal Respo nse: p1 OK p1: AI : frame synchr[...]

  • Page 61

    NDA-24233 Issue 2 Page 3 -35 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RCST Read Partic ipating Conf erence S tatus 7-5 Descript ion: This reads c onferenc e partic ipating s tatus. Command Format: RCST Response: Normal Respo nse: p1 p2 OK p1: PP : point to poi nt con nection MP : multi-poin t connecti on p2: H24 3 : multi-poin[...]

  • Page 62

    Page 3-36 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.8 Ala rm Related Command CALM Read Alarm Status (1 of 2) 8-1 Descript ion: Acq uires alarm st atus. This is u sed to ch eck t he inf ormati on of a genera ted alarm and the loopba ck sta tus. Command Format: CALM Response: Normal Respo nse: p1 p2 p 3 p4 p5 p[...]

  • Page 63

    NDA-24233 Issue 2 Page 3 -37 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CALM Read Alarm Status (2 of 2) 8-1 Response p4: Bondi ng alarm D0: Bonding frame loss 0: normal 1: abnormal D1: Bonding spee d negotia tion f ail 0: normal 1: abnormal D2: Network typ e negotiat ion f ail 0: normal 1: abnormal D3: Dialing nu mber nego tiati[...]

  • Page 64

    Page 3-38 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.9 Histor y Reading Command RLAM Read Communication/Alar m History 9-1 Descript ion: Acquir es communi cation hi story an d alarm history. Command Format: RLAM p1 p2 p3 p1: L : comm uni cati on hist ory A : alarm history p2: yyyy/mm/dd/hh: mm : starting date [...]

  • Page 65

    NDA-24233 Issue 2 Page 3 -39 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.10 Reg istering Loca l Location Na me Command MRNS Registe ring Local Si te Name 10-1 Desc rip tio n: R egi st ers a loca l site locat ion nam e. Command Format: MRNS p1 p2 p1: xxxxxxxx : alphabet loca tion na me (within 16 charact ers) p2: XXXXXXX X : cha[...]

  • Page 66

    Page 3-40 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.1 1 Serial P ort Contr ol Command SSIO S etting Serial Port 11-1 RSIO Checking Serial Port Setting 11-2 Descript ion: Visua Link is equipped wi th two s erial po rts, and f our possi ble set tings: T120 data confer ence Camera cont ro l External console cont[...]

  • Page 67

    NDA-24233 Issue 2 Page 3 -41 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.12 Acq uiring V ersion Command RVER Requesti ng Software Versi on 12-1 Desc rip tio n: A cqui res t he Vi sua Link softw are ve rsi on. Command Format: RVER Response: Normal Respo nse:p1 p2 OK p1: xxxxxxxx : F/W version p2: xxxxxxxxx : DSP version Error Re[...]

  • Page 68

    Page 3-42 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.13 Mainte nance Command SLLB Setting Local Loopback 13-1 RLLB Checking Local Loopback Setting 13-2 Descript ion: Sets local lo opback pr ocess. VisuaLink is equ ipped with a loopba ck test p oint i nside a t erminal f or autonomous diagnos is as a mai ntenan[...]

  • Page 69

    NDA-24233 Issue 2 Page 3 -43 V isuaLin k 12 8 /38 4 En g i neerin g Guide Co n s o l e Co m mand List 3 . 14 Re p ort Response Cont r ol Command ITCS Conference Status Report Control 14-1 IMCU Multi-poi nt Conferen ce Status Re port Cont rol 14-2 Descript ion: Acti vatio n /deact ivatio n o f conf erenc e status reporti ng fo r thi ng suc h as: CAM[...]

  • Page 70

    Page 3 -44 NDA - 24233 Is sue 2 Console C om m and L ist V is u aLink 1 28/ 3 8 4 Engi n eerin g G u ide I243 H.243 Report Control 14-3 ICGP Command Gene rator Related Re port Control 14-4 Descript ion: Acti vatio n /deact ivatio n o f H.243 mul tipoint co n fere n ce sta tus repor ting fo r suc h t h in g s a s : COPI / CS P I / CRPI / C V CI / CS[...]

  • Page 71

    NDA-24233 Issue 2 Page 3 -45 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.15 Mainte nance and Other Co mmand ISPR S etting Parameter Initialization 15-1 CRAM Clearing Bac kup Memory 15-2 RRST System Reset Requ est 15-3 Desc ri ptio n : Ini tializ es al l V isua Link value s to fa cto ry defau lt. Command Format: ISPR Response: N[...]

  • Page 72

    Page 3-46 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide WCLK Setting System Clock 15-4 RCLK Checking System Clock Setting 15-5 Descript ion: Sets the Vis uaLink buil t-in sy stem cl ock, dat e and time. Command Format: WCLK p1-p2-p3 p4:p5:p6 (p7) p1: yyyy : year p2: 01-12 : month p3: 01-31 : date p4: 01-24 : hour p[...]

  • Page 73

    NDA-24233 Issue 2 Page 3 -47 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.16 Mutli- point Confer ence Status Command RMNA Read Multi-point Conference Participating Location Name 16-1 Descript ion: Acquir es lo cation name of all locati on partic ipating l ocat ions in mult i- point co nfere nce. Command Format: RMNA p1 p1: 1-255[...]

  • Page 74

    Page 3-48 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RMST Read Multi-point Conference Operation Status (NEC Specific) 16-2 Descript ion: Acquir es a status of a multi-poi nt conf erence s tatus when in a ctivate d for NEC specif ic mult i-point conferenc e. Command Format: RMST p1 p2 p3 p4 p5 p6 .. .......... p1[...]

  • Page 75

    NDA-24233 Issue 2 Page 3 -49 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RMPS Read Multi-point Conference Operation Status 16-3 RMMD Read Multi-po int Conference Mode Status 16-4 Descript ion: Acquir es th e multi-po int confe rence status. Command Format: RMPS Response: Normal Respo nse p1 p2 p3 p 4 p5 p6 OK p1: 1-255 : local s [...]

  • Page 76

    Page 3-50 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.17 Model I dentific ation Command RMES Read Model Identification 17-1 Descript ion: Read mode l iden tifica tion Command Format: RMES Response: Normal Respo nse p1 p2 OK p1: TC2000_EC : VL128 TC2000_6B : VL384 p2: F/W ver sion: ex. V01.01.01 Error Res ponse:[...]

  • Page 77

    NDA-24233 Issue 2 Page 3 -51 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.18 Audio T raining Command ECTS Audio Training Command 18-1 Descript ion: Init iate aud io tr aining. Whit e nois e is gener ated whil e 7 sec onds. Command Format: ECTS Response: Normal Respo nse OK Error Res ponse: ERR01[...]

  • Page 78

    Page 3-52 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.19 IS DN Contro l Command NCRN Requesting C onnection 19-1 Descript ion: Plac ing a BRI ISDN call. A c all can be reques ted by ei ther dir ectly specif ying a remot e number or usi ng an speed d ial numb er. If us ing an spe ed di al n umbe r, i t mus t be [...]

  • Page 79

    NDA-24233 Issue 2 Page 3 -53 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NDSC Requesting Disconnection 19-2 NCIC Incoming Call Permit/Reject 19-3 Descripti on: A disconne ct in an BRI ISDN call. Th is command is used to ex ecute a disconne ction request a nd ending c ommunicat ion. Command Format: NDSC Response: Normal Response: [...]

  • Page 80

    Page 3-54 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NSTQ Communication Status Inqu iry 19-4 Descript ion: Gives a status on the I SDN communica tion. Command Format: NSTQ Response: Normal Respo nse p1 p2 p3 p4 p5 p6 p7 OK p1: B : communic ation speed B 2B : communicat ion speed 2B 3B : communication spe ed 3B 4[...]

  • Page 81

    NDA-24233 Issue 2 Page 3 -55 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.20 Camera Cont rol Command CAMS Request for Camera Direction Change 20-1 Descript ion: Sets camera h ead swing co ntrol. This command i s valid o nly when an preset or auto mode camera i s in use . A control of Camera 2 is only v alid when th e came ra is [...]

  • Page 82

    Page 3-56 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.21 Option Contr ol Command POCS Pointer Control 21-1 VCTS Talker Detection Cont rol 21-2 Desc riptio n: Activates or dea ctiva tes the on-scr een point er . The poin ter is displ ayed at the r emote monit or. This poi nter can only be activat ed when bo th s[...]

  • Page 83

    NDA-24233 Issue 2 Page 3 -57 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List STPR SnapShot Transmission Request 21-3 SXMR Standard Display Screen Setting Request 21-4 Descript ion: Sends a snaps hot (sti ll graphi c) ima ge to the r emote sit e. Command Format: STRP Response: Normal Response OK Error Res ponse: ERR01 Descript ion: Re[...]

  • Page 84

    Page 3-58 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SXST Req uest to Ac quire C omposite Scree n Setti ng 21-5 Descript ion: Reque st for stat us on the various vi deo screens di splays. This command is only valid when g oing t hrough an NEC mul ti-point control unit MCU5000 A, that has multi- scree n cont rol [...]

  • Page 85

    NDA-24233 Issue 2 Page 3 -59 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.22 Mult i-poin t Confe rence Contr ol COPR Request to Chairman Control 22-1 Descript ion: Acquir es or deletes c hairman con trol. Command is only valid when the VisuaLink is in a multi-po int co nference . Command Format: COPR p1 p2 p1: 1-14 : confere nce[...]

  • Page 86

    Page 3-60 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide CSPR Multiple Address Transmission Request 22-2 Descript ion: Acquir es th e simulcas t transmi ssion. Command Format: CSPR p1 p1: 0-255 : conference roo m number to be recei ved * : composi te sc reen disp lay Note 1: When p1 is omit te d, i t bec omes a l oc[...]

  • Page 87

    NDA-24233 Issue 2 Page 3 -61 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CRPR Specific Picture Reception Requ est 22-3 CMPR Request to Switch Multiple Address Originator Monitor 22-4 Descript ion: Acti vates or d eacti vates sel ective r eceive mode . Command Format: CRPR p1 p2 p3 p1: 1-255 : reception si de confe rence roo m num[...]

  • Page 88

    Page 3-62 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.23 Open ing Contr ol Command OMES Opening Message at Unit Activation 23-1 Descript ion: Report openi ng message at power u p. This is report ed when the unit i s auto matical ly re -start due to s ome fai lure. In the cas e of au tomati c rese t, please p er[...]

  • Page 89

    NDA-24233 Issue 2 Page 3 -63 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.24 Communicat ion Status Report Command H221 H.22 1 Synchronous Status Report 24-1 IMAC M anufac turer C ode Re port 24-2 Descript ion: H.221 re porti ng status change. Command Format: H221 p1 p1: AI : synchroni zation e stabl ished DI : out of synchr oniz[...]

  • Page 90

    Page 3-64 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide IMOD Report of Common Mode in Communication 24-3 Descript ion: Report s the negotiat ed mode duri ng a communi cation. Command Format: RMOD p1 p2 p3 p4 p5 p6 p7 p8 p1: B/2B/3 B/4B/5B/6 B : communication sp eed p2: 56/64 : network TYPE p3: Q CIF/ FCIF : v i deo[...]

  • Page 91

    NDA-24233 Issue 2 Page 3 -65 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.25 Alarm St atus Repo rt Command RALM Alarm Status Change Report (1 of 2) 25-1 Descri ption: Re ports the VisuaLink alarm s tatus. Thi s is repo rted when al arm and loo pback status is change d. Command Form at: RALM p1 p2 p3 p4 p5 p6 p1: 00-FF : CPU/ VID[...]

  • Page 92

    Page 3-66 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RALM Alarm Status Change Report (2 of 2) 25-1 p4: Bonding al arm D0 : Bonding frame los s 0: normal 1: abnormal D1 : Bonding speed negoti ation fa il 0: normal 1: abnormal D2 : Bonding type negoti ation fa il 0: nor mal 1: abnor mal D3 : Dial number ne gotia t[...]

  • Page 93

    NDA-24233 Issue 2 Page 3 -67 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.26 Video S tatus Report Command R V SR Incoming V ideo Synchr onous Status Report 26-1 Descript ion: Visua Link monit ors a syn chronizat ion st atus of a receive d video, and a report is made wh en a recei ved video s ynchro nization stat us changes. Comm[...]

  • Page 94

    Page 3-68 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.27 Pa rticipating Status Report Command ICST Participating Conference Status Report 27-1 Desc rip tio n: R epor ts pa rtic ip ati ng co nfe ren ce stat us. Command Format: ICST p1 p2 p1: PP : point – point c onnecti on MP : multipoint connectio n p2: H243 [...]

  • Page 95

    NDA-24233 Issue 2 Page 3 -69 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.28 ISDN Repor t Command NALT Display Dur ing Calling 28-1 NINC Incoming Call Report 28-2 NONL On-line Report 28-3 Desc ri ptio n : Ca ll r epor t sta tu s an or igi na tion p oint . This means cal lin g to re mot e s ite. Command Format: NALT Descript ion:[...]

  • Page 96

    Page 3-70 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NDCI Disconnection R eport 28-4 Descript ion: Report s dis connectin g the ISDN li ne. Thi s is a rep ort to sh ow that communic ation is discon nected. Sec tion 9 des cribes t he disconn ectio n reason. Command Format: NDCI p1 p2 p3 p4 p5 p6 p7 p8 p1: hh:mm:s[...]

  • Page 97

    NDA-24233 Issue 2 Page 3 -71 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.29 Camera Cont rol Report Command CAMI Camera Status Report 29-1 CPNI Talker Name Display Report 29-2 Descript ion: This is a st atus rep ort on the remote camera c ondition . (When remote camera cont rol i s u sed) Command Format: CAMI p1 p1: 0 : not conn[...]

  • Page 98

    Page 3-72 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.30 Option Contr ol Report Command STEI SnapShot Transmission Ending Report 30-1 RFVR SnapSho t Reception R eport 30-2 Descript ion: This is a r eport noti fying a s napshot transmis sion is c ompleted. Command Format: STEI p1 p1: OK : normal end ing NG : fa [...]

  • Page 99

    NDA-24233 Issue 2 Page 3 -73 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.31 Other Re port Command CGSI Automatic A ctivation File Starting Report 31-1 CGEI Automatic A ctivating File Ending Report 31-2 Desc rip tio n: T his is a rep ort to sho w the st art o f au to exe c uted f ile. Command Format: CGSI p1 p1: 0 -7 : numbe r o[...]

  • Page 100

    Page 3-74 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.32 Multi -Point Rela ted Repor t Command IMPS Multi-poi nt Confer ence Oper ation Statu s Report 32-1 IMMD Mu lti-poin t Conferen ce Mode St atus Report 32-2 COPI Acquisition of Right to Operate Report 32-3 Descript ion: This is a r eport on t he status of m[...]

  • Page 101

    NDA-24233 Issue 2 Page 3 -75 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CSPI Multiple Address Transmission Report 32-4 CRPI Spe cific P ict ure Re ceptio n Rep ort 32-5 CVCI Talker Dete ction Control Rep ort 32-6 Descript ion: Thi s is to report the co mple tion of a simulca st tr ansmiss ion. Command Format: CSPI p1 p1: 0-255 ,[...]

  • Page 102

    Page 3-76 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide CSSC SnapShot Transmission Permit Report 32-7 CMPI Multiple Addr ess Originator Mo nitor V ideo Switch Report 32-8 CJNI T erminal C onnect ion Report 32-9 Descript ion: This report is a req uest to t ransmit a snapsho t. Command Format: CSSC p1 p1: 1-255 : con[...]

  • Page 103

    NDA-24233 Issue 2 Page 3 -77 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CSTI Conference Stat us Report 32-10 Descript ion: This is to report the multi-point conference status. This i s reported only in a NEC s peci fic mu lt i-p oi nt con fer en ce. Command Format: CSTI p1 p2 p3 p4 p5 p6 ... ......... p18 p1: 1-14 : local sit e [...]

  • Page 104

    Page 3-78 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.33 Multi -Scre en Related Re port Command XMII Composite Screen Setting Report 33-1 XMCI Standard Display Scr een Setting Report 33-2 Descript ion: Report s a compo site scr een sett ing. Command Format: XMII p1 p2/p3 p4=p5: p6 p1: Composite Scre en Status D[...]

  • Page 105

    NDA-24233 Issue 2 Page 3 -79 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List XSCI Response to Composite Screen S etting Request 33-3 Descri ption: This is a res ponse repo rt of compos ite scr een set ting/ac quisiti on request . Command Form at: XSCI p1 p1: OK : normal ERRxx : NG[...]

  • Page 106

    Page 3-80 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.34 Micr ophone Command PPNI Voice Activate Microphone Report 34-1 Descript ion: Report microp hone that inputs the voice Command Format: PPNI p1 p1: 1 to 3[...]

  • Page 107

    NDA-24233 Issue 2 Page 3 -81 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.35 Sy stem Err or Command ERRI System E rror Repo rt 35-1 Descri ption: Re port syst em error Command Form at: ERRI p1 p1: [S_RAM] BACKUP ERROR: SRAM er ror [SYSTEM] BACKUP ERROR: Sy stem parameter error [M_DIAL] BACKUP ERROR: Speed dial infor mation error[...]

  • Page 108

    Page 3-82 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.36 On-Scr ee n Command SOSD Setting On-Screen Display 36-1 Descript ion: Sets the On- Screen dis plays for the Vi suaLink Command Format: SOSD p1 p1: ON: Activat es the On-Sc reen Message OFF: Deactivates t he On-Scree n Message Response: Normal Response : O[...]

  • Page 109

    NDA-24233 Issue 2 Page 3 -83 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.37 Curr ent Power OFF Conditi on CSTB Curre nt Power OFF Condition 37-1 Descript ion: Set an d read the curren t Power OFF Cond ition. The CODEC ou tputs b lack video when no user inte rvention has been ac ted on for a peri od of t ime. Command Format: CST[...]

  • Page 110

    Page 3-84 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide This page is for yo ur note s.[...]

  • Page 111

    NDA-24233 Issue 2 Page 4-1 V isuaLink 128/ 384 Engineeri ng Guide Error Respo nse T able 4: Err or Response T a ble If a command input fr om consol e is not u nderstand able or ha s a dif ferent c onfigura tion, a n error r esponse i s trans mit te d to th e co n sol e. Err or res pon s es a re sho wn in the f ollow in g t abl e. T able 4-1: Erro r[...]

  • Page 112

    Page 4-2 NDA-24233 Is sue 2 Error Res ponse T able V isuaLink 128/ 384 Engi neering Guide Figure 4 -1: Err or Respo nse T able (2 /2) ERR N umbe r Conte nts C ount erme as ure s ERR46 Off l ine. C heck c ommunic ation status and exe cute comma nd aga in. ERR47 Cu rrently proc essi ng. Try again ERR48 Di sconnec ting. Check commu nication status and[...]

  • Page 113

    NDA-24233 Issue 2 Page 5-1 V isuaLink 128 /384 Eng ineering Gui de Factors of Discon nections 5: List of Factors for Disconnectio n in T abl e Locatio n of Fact ors for Disconnect ion LU: Local Us er LN: Local Networ k TN: Transit Network RU: Remote User RN: Remote Net work Number Messag e Factors for Disconn ection Countermeasure (Ex ample) Loca t[...]

  • Page 114

    Page 5-2 NDA-24233 Is sue 2 Factors o f Disc onnectio ns Number Messag e Factors for Disconn ection Countermeasure (Ex ample) Loca tion # 50 Request ed facili ty not subscr ib ed Procedure for a reque st ed fa ci lit y i s not taken . Contact a reta iler or a servic e center. LN # 57 Bearer capa bility not authorize d Unautho riz ed tran sm is si o[...]

  • Page 115

    NDA-24233 Issue 2 Page 5-3 V isuaLink 128 /384 Eng ineering Gui de Factors of Discon nections Number Messag e Factors for Disconn ection Countermeasure (Ex ample) Loca tion # 111 Protocol error, unspecif ied Report o f other proto col error. Aft er checking a remote number, retry . RN # 127 Inter w orki ng, unspecif ied Inter-work occurrence in a n[...]

  • Page 116

    Page 5-4 NDA-24233 Is sue 2 Factors o f Disc onnectio ns This page is for yo ur note s.[...]

  • Page 117

    NDA-24233 Issue 2 Page A-1 V isu aLink 1 28/384 E n gineer ing Guid e Appendix A Appendix A: Pin-out Specification Pin-out specifi cations f or all t he VL 128/ 384 connect ors. SERIAL 1 POR T Note: The signal di rection shown is seen f rom the V isuaLink 128 ( DTE). SERIAL 2 POR T Note: The signal di rection shown is seen f rom the V isuaLink 128 [...]

  • Page 118

    Page A-2 NDA -24233 Issue 2 Append ix A V isuaLink 1 28/384 E nginee ring Guide S/T Line (IS DN Connecti on) Note 1: The sign al dir ectio n shown is s een fr om the V isuaLink 128 (DTE). Note 2: Pins 1, 2, 7, and 8 a re not use d. T e lephone Connection S-V ide o Socket Input /Output PIN # Symbol Function P olarity 1a 2b 3 c T ransm it Tip + 4d R [...]

  • Page 119

    NDA-24233 Issue 2 Page B-1 V isuaLink 128/ 384 Engineeri ng Guide Appendix B Appendix B: Line Speed Specificatio ns X : ca n not se t ∆ : can set but vid eo is not transmitt ing : snaps hot not av ailab le X : ca n not se t 1B (64kbps) Line Speed A udio Algorithm s G.711 µ -Law PCM G.722 SB-A DPCM G.728 LD-CELP Mute A udio Byte Rate (kb ps) 56.0[...]

  • Page 120

    Page B-2 NDA-24233 Is sue 2 Append ix B V isuaL ink 1 28/384 E nginee ring Gu ide This page is for yo ur note s.[...]

  • Page 121

    NDA-24233 Issue 2 Page C-1 V isuaLink 128/ 384 Engineeri ng Guide Appendix C Appendix C: ISDN Q .931 Cause Code Definitions The foll owing t able defi nes the Q.931 cause codes that the Visua Link 128/ 384 write s to event file s. Q.9 31 s p ecif ic ati on de fine s the l aye r-3 pr oto col f o r two connecte d ISDN devi ces. T a ble C: ISDN Q.931 [...]

  • Page 122

    Page C-2 NDA-24233 Is sue 2 Append ix C V isuaL ink 1 28/384 E nginee ring Gu ide 43 Access i nformat ion disc arded T he netwo rk could not de liver acc ess info rmatio n; the t ype of informa tion d iscarded - for ex ample, s ub-add ress or protocol - may be pro vided in the mess age. 44 Request ed circui t/chan nel no t availab le The requ ested[...]

  • Page 123

    NDA-24233 Issue 2 Page C-3 V isuaLink 128/ 384 Engineeri ng Guide Appendix C 901 No response fro m the rem ote termin al Automat ic diale r has ti med out. Please check number a nd try a gain. 903 Network failure Layer 1 failur e. Verify p hysical network connecti on. 904 Network failure Layer 2 failur e. Verify th e pin out between the CODEC and t[...]

  • Page 124

    Page C-4 NDA-24233 Is sue 2 Append ix C V isuaL ink 1 28/384 E nginee ring Gu ide This page is for yo ur note s.[...]