Mitsubishi Electronics LY18R2A manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Mitsubishi Electronics LY18R2A, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Mitsubishi Electronics LY18R2A one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Mitsubishi Electronics LY18R2A. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Mitsubishi Electronics LY18R2A should contain:
- informations concerning technical data of Mitsubishi Electronics LY18R2A
- name of the manufacturer and a year of construction of the Mitsubishi Electronics LY18R2A item
- rules of operation, control and maintenance of the Mitsubishi Electronics LY18R2A item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Mitsubishi Electronics LY18R2A alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Mitsubishi Electronics LY18R2A, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Mitsubishi Electronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Mitsubishi Electronics LY18R2A.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Mitsubishi Electronics LY18R2A item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    MELSEC-L I/O Module User's Manual -LX10 -LX28 -LX40C6 -LX41C4 -LX42C4 -LY10R2 -LY18R2A -LY20S 6 -LY40NT5 P -LY28S 1A -LY41NT1 P -LY42NT1 P -LY40P T5P -LY41P T1P -LY42P T1P -LH42C4NT1P -LH42C4PT1P[...]

  • Page 2

    [...]

  • Page 3

    1 SAFETY PRECAUTIONS (Read th ese prec autio ns befor e using th is prod uct.) Befor e usin g this produc t, pl ease rea d thi s manua l and t he r elevan t manu als care full y and p ay f ull at tent ion to safet y to han dle th e product correc tly . The pre cauti ons giv en in th is manu al are concer ned wit h this product only . For the safet [...]

  • Page 4

    2 [Design Precaution s] W ARNING ● Conf igure saf ety ci rcuit s ext ern al to the pr ogramma ble con tro ller to ensur e that the entir e syst em opera tes saf ely ev en when a fa ult o ccurs in the ex ternal powe r supply or the p rogramm able co ntro ller . Failu re to do so may re sult in an acci dent due t o an inco rre ct output or mal func[...]

  • Page 5

    3 [Design Pre cautions ] [Inst allatio n Precautions] [Inst allatio n Precautions] [Wiring Precautions ] CAUTION ● Do not in stall the co ntrol lines or communica tion cables t ogether with t he main circuit lines or power cable s. Keep a di stance of 100mm or more betwee n them. Fail ure to do so may resu lt in malfun ction due to noise. ● Dur[...]

  • Page 6

    4 [Wiring Precautions] CAUTI ON ● Indiv idually gr ound the FG and LG termi nals of the programmable controll er with a ground resi stance of 100 oh ms or less. Failu re to do so may resul t in electri c shock or malfunction. ● Use app licable sol derless termi nals and tigh ten them withi n the specifie d torque ra nge. If any sp ade solde r l[...]

  • Page 7

    5 [St artup and Maintenan ce Precaution s] [St artup and Maintenan ce Precaution s] [Disposal Precaut ions] W ARNING ● Do not to uch any terminal w hile po wer is on. Doi ng so will cause el ectric sho ck or malfuncti on. ● Correct ly connect th e battery conne ctor . Do not charge , disassemble , heat, short -circuit, solder , or throw the bat[...]

  • Page 8

    6 CONDITIONS OF U SE FOR THE PRODUCT (1) Mitsubishi programmable controller ("the PRODUCT ") shall be used in conditions; i) where any problem, fau lt or failure occurring in the PRODUCT , if any , shall not lead to any ma jor or s erious acci den t; an d ii) wher e the backup an d fail-safe f unction ar e systemat ically or au tomatical [...]

  • Page 9

    7 INTRODUCTION Thank yo u for purchas ing the Mits ubishi MELSEC-L series progr ammable contro llers. This man ual describ es safety preca utions, speci fications, a nd functions. Before usi ng this produ ct, please read this manual and the relevant manuals c arefully and dev elop familiari ty with the function s and performa nce of the MELSEC -L s[...]

  • Page 10

    8 COMPLIANCE WITH EM C A ND LOW VOL T AGE DIRECTIVES (1) Method of ensuring complianc e T o ensure that Mits ubishi program m able con trollers maint ain EMC and Low V oltage Dire ctives when inc orporated into oth er machinery or equipment, cert ain measures may be neces sary . Please refer to one of the foll owing manual s. • MELSEC-L CPU M odu[...]

  • Page 11

    9 RELEV ANT MAN UALS (1) CPU module user's manual (2) Head m od ule User's Manual (3) Operating manua l (4) User' s manual for optional items Manu al na me manual number (mode l code) Descrip tion MELSE C-L CPU Mo dule U ser's Man ual (H ardware Design, Ma inten ance an d Inspection ) SH-08089 0ENG , 1 3JZ36 S p ecifications of [...]

  • Page 12

    CONTENTS 10 CONTENTS SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CONDITIONS OF USE FOR THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Page 13

    11 CHAPTER 6 INST ALLA TION AND WIRING 61 6.1 Install a tion Enviro n ment and I n stallati on Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 6.2 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 6.2 .1 F or the 18-p oin [...]

  • Page 14

    12 MANUAL P AGE ORGANIZA TION In th is manual, p ages are orga nized and the s ymbols are us ed as shown b elow . The foll owing illust ration is for e xplanation purp ose only , and sh ould not be re ferred to as an ac tual document ation. *1 The mouse operation example is provided below . (For GX Works2) The section of the current page is shown. [...]

  • Page 15

    13 Pages des cribing spe cifications are organiz ed as shown b elow . The follo wing illustrat ion is for ex planation purpos e only , and shou ld not be refe rred to as an actu al document ation. Module specifications Model name and module name Derating chart (only for input modules) External connections T erminal connections Appearance[...]

  • Page 16

    14 TERMS Unles s otherwise spe cified, this ma nual uses t he following t erms. P ACKING LIST The following item s are included in the pa ckage of this p roduct. Before u se, check that all the item s are included. Te r m Description CPU mo dule Abbrevia tion for the MEL SEC-L se ries CPU m odule Power supply module Abbreviation for the MEL SEC-L s[...]

  • Page 17

    15 CHAPTER 1 PRODUCT LINEU P 1 1.1 Product Lineup CHAPTER 1 PRODUCT LINEUP 1.1 Product Lineu p (1) Input module (2) Output module (3) I/O combine d module Modul e name Input specific ation s Number of oc cupi ed I/O points Current consump tion Wei ght Mo del n ame Reference AC Inpu t modu le T ermin al block 100 to 12 0V AC, 16 po ints 16 po ints 9[...]

  • Page 18

    16 1.2 How to Read t he Model Name • F or in put modul e or outpu t mo dule • For I/O co mbined mod ule No. Ite m Symbol Specifica tions 1) Modul e type X Input YO u t p u t H I/O combin ed No. Ite m Symbol Specifica tions Inpu t module Outp ut mod ule AC input DC input Cont act outp ut T riac outp ut T ransistor output 2) V ol tage specificati[...]

  • Page 19

    17 CHAPTER 1 PRODUCT LINEU P 1 1.2 How to Read the Model Nam e No. Item Symbol Specificat ions Inpu t modul e Outpu t module AC input DC input Contact ou tput T riac outp ut T ransis tor outp ut 5) Current specifications 1 - - - 1A 0.1A 2 --2 A -- 4- 4 m A - - - 5 ----0 . 5 A 6 - 6mA - 0.6A - No. Item Symbol Specificatio ns 6) Exte nded specificati[...]

  • Page 20

    18 CHAPTER 2 P ART NAMES *1 Operate the Indication select or switch with you r fingers. Do not use a screwdriver or simila r tool as it m ay damage the switch. No. Name Descri ption 1) Module jo int lever s Levers fo r conn ecting tw o modu les 2) I/O oper ation statu s indicato r LEDs Indicate t he I/O s tatus. • On (gre en): I /O signal is on .[...]

  • Page 21

    19 CHAPTER 2 P A RT NAMES 2 Memo[...]

  • Page 22

    20 CHAPTER 3 BEFORE USIN G I/O MO DULE 3.1 Input Mod ule (1) Common precautions for all output modules (a) Simult aneous on point s The number of simu ltaneous on point s of input modu le depends on the input voltage and ambient tem perature. Refer t o the derating ch art of the inpu t module sp ecifications. ( Page 28, CHAPTER 4) (2) Precautions f[...]

  • Page 23

    21 CHAPTER 3 BEFORE USING I/O MODULE 3 3.2 Output Module 3.2 Output Module (1) Common prec autions for all output modules (a) M aximum switchi ng frequency when the module drives Inductive l oad. The output must be on for one secon d or longer an d off for on e second or lon ger . (b) Load for connection When con necting a co unter or timer that ha[...]

  • Page 24

    22 (2) Precaution for using the transi stor output module (a) Action against reverse current If a t ransistor output module is wi red as show n below , reverse current flows in a n output element , causing a failure of the elemen t. When w iring a transis tor output module , connect a dio de as shown b elow . • When con necting transist or output[...]

  • Page 25

    23 CHAPTER 3 BEFORE USING I/O MODULE 3 3.2 Output Module (3) Precautions f or using the cont act output module When usin g the cont act output modu le, conside r the following . • Relay li fe (contact s witching life ) • Eff ects to rela y life due to co nnected load • Me asu res agai nst bac k EMF (a) Relay life (cont act switching li fe) Ap[...]

  • Page 26

    24 (b) Effec ts t o relay life due to connected load The actual relay li fe may be s ignificantl y shortened compared to the relay life curve, de pending on t he type o f a load c onnected and the characteris tics of inrush c urrent. ( Page 23 , Section 3.2 (3) (a) ) Also, the inru sh current m ay cause the module cont act welding. T ake the foll o[...]

  • Page 27

    25 CHAPTER 3 BEFORE USING I/O MODULE 3 3.2 Output Module (c) M easures against back EMF Configu re a cont act protectio n circuit for exte nding the co ntact lif e, preventing noise when the contact is cut of f, and supp ressing the gen eration of carb ide and nitric a cid due to ar c discharge. An Inco rrect contac t protection circ uit may cau se[...]

  • Page 28

    26 (4) Precautions for using the tria c output module (a) Measures against back EMF T ake measures against back EMF to the si de where the l oad is connec ted if the wiri ng distan ce from the output module to the load is l ong. If no t, the surge supp ressor in the ou tput module m a y not w o rk ef fectively . Exam pl e Meth od for select ing e l[...]

  • Page 29

    27 CHAPTER 3 BEFORE USING I/O MODULE 3 3.3 I/O Combined Module 3.3 I/O Combined Modu le This sec tion describes the precauti ons for using th e I/O combined module. The preca utions not desc ribed below are common to tha t for the input module and outp ut module. ( Page 20, Section 3 .1, Page 21, Section 3.2) (1) I/O numbers of the I/O combined mod[...]

  • Page 30

    28 CHAPTER 4 SPECIFICA TIONS 4.1 General Specifications For the g eneral spec ifications of th e I/O modules, refer to the fol lowing manual. Manual "Safety Gui delines" incl uded in the C PU module or head module[...]

  • Page 31

    29 CHAPT ER 4 SPECIFIC A T ION S 4 4.2 Input Module S pecifications 4.2 Input Module Specifications 4.2.1 LX10 AC input module Item Spec ification s Appe arance Numb er of in put po ints 16 poin ts Rated input vol tage, freque ncy 100 to 120V AC ( +10%/-15 %), 5 0/60Hz(±3 Hz) Input vo ltage dis tortion Wit hin 5% Rated input cu rrent 8.2mA (1 00V [...]

  • Page 32

    30 Exte rnal conn ections T ermin al connec tions LED LED Internal circuit TB1 TB16 TB17 Photocoupler Photocoupler 100 to 120VAC X01 X03 X05 X07 X09 X0B X0D X0F X00 X02 X04 X06 X0A X0C X0E COM 1 3 5 7 9 11 13 15 17 2 4 6 8 10 12 14 16 18 Empty X08 100 to 120V AC T erminal number Signal name Signal name Viewed from the front of the module.[...]

  • Page 33

    31 CHAPT ER 4 SPECIFIC A T ION S 4 4.2 Input Module S pecifications 4.2.2 LX28 AC input module Item Spec ification s Appe arance Numb er of in put po ints 8 points Rated input vol tage, freque ncy 100 to 240V AC ( +10%/-15 %), 5 0/60Hz(±3 Hz) Input vo ltage dis tortion Wit hin 5% Rated input cu rrent 16 .4mA (2 00V AC, 60Hz) , 13.7mA (200V AC, 50H[...]

  • Page 34

    32 4.2. 3 LX 40C6 DC in put mod ule Item Specifica tions Appe arance Number of inpu t points 16 points Rated in put voltage 24VDC (r ipple rate: 5% or less) (Allowable voltage range : 20.4 to 28.8VDC) Rated in put cur rent 6.0mA T YP . (at 24V DC) ON voltage/O N curre nt 15V or higher /4mA or higher OFF vol tage/OFF cu rrent 8V or l ower/ 2mA or lo[...]

  • Page 35

    33 CHAPT ER 4 SPECIFIC A T ION S 4 4.2 Input Module S pecifications Exter nal conn ectio ns T erminal connecti ons 24VDC 24VDC LED LED Internal circuit TB1 TB16 TB17 Photocoupler Photocoupler X01 X03 X05 X07 X09 X0B X0D X0F X00 X02 X04 X06 X0A X0C X0E COM 1 3 5 7 9 11 13 15 17 2 4 6 8 10 12 14 16 18 Empty X08 24VDC 24VDC T erminal number Signal nam[...]

  • Page 36

    34 4.2. 4 LX 41C4 DC in put mod ule Item Specifica tions Appe arance Number of inpu t points 32 points Rated in put voltage 24VDC (r ipple rate: 5% or less) (Allowable voltage range : 20.4 to 28.8VDC) Rated in put cur rent 4.0mA T YP . (at 24V DC) ON voltage/O N curre nt 19V or higher /3mA or higher OFF voltage/OFF current 9V or lower/1.7mA or lowe[...]

  • Page 37

    35 CHAPT ER 4 SPECIFIC A T ION S 4 4.2 Input Module S pecifications Exter nal conn ectio ns T erminal connecti ons 24VDC 24VDC LED LED Internal circuit B20 A05 B01,B02 Photocoupler Photocoupler A20 B20 A19 B19 B18 B17 B16 B15 B14 B13 B12 B1 1 B10 B09 B08 B07 B06 B05 B04 B03 B02 A12 A04 A02 B01 A18 A17 A16 A15 A14 A13 A1 1 A10 A09 A08 A07 A06 A05 A0[...]

  • Page 38

    36 4.2. 5 LX 42C4 DC in put mod ule Item Specifica tions Appe arance Number of inpu t points 64 points Rated in put voltage 24VDC (r ipple rate: 5% or less) (Allowable voltage range : 20.4 to 28.8VDC) Rated in put cur rent 4.0mA T YP . (at 24V DC) ON voltage/O N curre nt 19V or higher /3mA or higher OFF voltage/OFF current 9V or lower/1.7mA or lowe[...]

  • Page 39

    37 CHAPT ER 4 SPECIFIC A T ION S 4 4.2 Input Module S pecifications *1 Switching left side (F) prov ides the first half (X00 to X1 F) LED indications, and s witching right side (L) prov ides the latte r half (Y20 to Y 3F) LED indica tions. Exter nal conn ectio ns T erminal connecti ons sw 1B20 1B01,1B02 24VDC 24VDC LED 1A05 Internal circuit Photoco[...]

  • Page 40

    38 4.3 Output Module S p ecifications The foll owing outp ut module equip s the ove rload protection function and the overheat pro tection func tion. Applica ble model  L Y40NT5P , L Y41NT1P , L Y42NT1P , L Y40PT5P , L Y41PT1P , L Y42PT1P *1 This function is for protecting the internal circui t o f the module, not for protecting exte[...]

  • Page 41

    39 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications 4.3.1 L Y10R2 cont act outpu t module Item Specifica tions Appe aran ce Numb er of outp ut poin ts 16 poin ts Rated switching voltage, current 24VDC 2A (resistance load)/ point, 8 A/commo n 240V AC 2 A (COS  = 1)/poi nt, 8A/co mmon Minimum switching load 5VDC 1mA Maximum switch [...]

  • Page 42

    40 4.3. 2 L Y18R2A cont act output module (All poi nt s independent) Item Spec ification s Appe arance Number of out put po ints 8 p oints Insulation m ethod Relay Rated switching voltage, current 24 VDC 2A (resis tance load) /poi nt, 8A/m odule 240V AC 2A (COS  = 1)/p oint, 8A /modul e Minimum switching load 5VDC 1mA Maximum switching load 264V[...]

  • Page 43

    41 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications 4.3.3 L Y20S6 triac output module Item Specificatio ns Appe arance Numb er of outp ut poin ts 1 6 points Rated load voltage, frequen cy 100 t o 240VAC (+10%/-15% ), 50 /60Hz(±3H z) Maximum load cu rrent 0.6A/point, 4.8A/com mon Load vo ltage dis tortion ratio Within 5% Maxi mum lo[...]

  • Page 44

    42 4.3. 4 L Y28S1A triac output m odule (All p oint s i ndependent) Item Spec ification s Appe arance Number of out put po ints 8 po ints Insulatio n method Photo coupler isola tion Rated lo ad voltage, frequency 100 to 240 V AC (+ 10%/-15 %), 50/6 0Hz(±3 Hz) Maximu m load c urren t 1A/point, 8A/m odule Load v oltage disto rtion ra tio W it hin 5 [...]

  • Page 45

    43 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications Exte rnal conn ections T ermi nal co nnectio ns Load Load TB15 LED TB16 100 to 240VAC 100 to 240VAC LED TB1 Internal circuit TB2 1 3 5 7 9 11 13 15 17 2 4 6 8 10 12 14 16 18 Y00 Y01 Y02 Y03 Y04 Y05 Y06 Y07 Y00 Y01 Y02 Y03 Y04 Y05 Y06 Y07 Empty Empty Signal name Signal name Terminal[...]

  • Page 46

    44 4.3. 5 L Y40NT5P transistor output module (Sink type) Item Spec ification s Appe arance Number of out put po ints 16 p oints Rated lo ad voltage 10.2 to 28.8V DC Maximu m load c urren t 0.5A/p oint, 5 A/com mon Maximu m inrush current Current is limited by the o verload prote ction fun ction. Leakage cu rrent at OFF 0.1mA or less Maximu m voltag[...]

  • Page 47

    45 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications 4.3.6 L Y41NT1P transistor output module (Sink type) Item Specificatio ns Appe arance Numb er of outp ut poin ts 3 2 points Rated loa d voltage 10.2 to 28.8VD C Maximum load cu rrent 0.1A/point, 2A/comm on Maximum inrush curren t Cu rrent is limited b y the ov erload protect ion f [...]

  • Page 48

    46 Exte rnal conn ections T ermin al connec tions B20 A01,A0 2 B01,B0 2 12/24VDC A05 Internal circuit Constant-voltage circuit Photocoupler Photocoupler Load Load LED LED A20 B20 A19 B19 B18 B17 B16 B15 B14 B13 B12 B1 1 B10 B09 B08 B07 B06 B05 B04 B03 B02 A12 A04 A02 B01 A18 A17 A16 A15 A14 A13 A1 1 A10 A09 A08 A07 A06 A05 A03 A01 COM COM Y01 Y02 Y[...]

  • Page 49

    47 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications 4.3.7 L Y42NT1P transistor output module (Sink type) Item Specificatio ns Appe arance Numb er of outp ut poin ts 6 4 points Rated loa d voltage 10.2 to 28.8VD C Maximum load cu rrent 0.1A/point, 2A/comm on Maximum inrush curren t Cu rrent is limited b y the ov erload protect ion f [...]

  • Page 50

    48 *1 Switching left s ide (F) provides the first half ( Y00 to Y1F) LED indications, and switching right side (L) provides the latte r half (Y20 to Y3F) LED indications. Exte rnal conn ections T ermin al connec tions 1B20 1A01,1A02 1B01,1B02 LED 12/24VDC sw 1A05 Internal circuit Indication selector circuit Constant-voltage circuit Photocoupler Pho[...]

  • Page 51

    49 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications 4.3.8 L Y40PT5P transistor outpu t module (Source type) Item Specificatio ns Appe arance Numb er of outp ut poin ts 1 6 points Rated loa d voltage 10.2 to 28.8VD C Maximum load cu rrent 0.5A/point, 5A/comm on Maximum inrush curren t Cu rrent is limited b y the ov erload protect ion[...]

  • Page 52

    50 4.3. 9 L Y41PT1P transistor output module (Sour ce type) Item Spec ification s Appe arance Number of out put po ints 32 p oints Rated lo ad voltage 10.2 to 28.8V DC Max. loa d current 0.1A/poin t, 2A/c ommon Max. inrush curre nt Current is li mited by the ov erload pr otecti on functi on. Leakage cu rrent at OFF 0.1mA or less Maximu m voltage dr[...]

  • Page 53

    51 CHAPT ER 4 SPECIFIC A T ION S 4 4.3 Output Module Specifications Exter nal conn ectio ns T erminal connecti ons Internal circuit LED LED 12/24VDC Load Load Constant-voltage circuit TB20 A05 B01,B02 A01,B02 Photocoupler Photocoupler Viewed from the front of the module. 12/24VDC Load Load Load Load Load Load Load Load Load Load Load Load Load Load[...]

  • Page 54

    52 4.3. 10 L Y42PT1P transistor output m odule (Source type) *1 Switching left s ide (F) provides the first half ( Y00 to Y1F) LED indications, and switching right side (L) provides the latte r half (Y20 to Y3F) LED indications. Item Speci fication s Appe arance Number of out put po ints 64 poi nts Rated load voltage 10.2 to 28.8V DC Max. loa d cur[...]

  • Page 55

    53 CHAPT ER 4 SPECIFIC A T ION S 4 4.4 I/O Combined Module Specifications 4.4 I/O Combined Mo dule Specifications The I/O c ombined modul e equips the overload pro tection functio n and the ove rheat protecti on function. *1 This function is for protecting the internal circuit of the m odule, not for pr otecting external device s. Also, leaving the[...]

  • Page 56

    54 4.4. 1 LH42C4NT 1P DC input/transistor output combined module (Sink t ype) Item Specif ication s Appe arance  Input specifica tions Number of inpu t points 32 points Rated in put voltage 24VDC (r ipple rate: 5% or less) (Allowa ble voltage range : 20.4 to 28.8V DC) Rated in put cur rent 4.0mA T YP . (at 24V DC) Input ON voltage/ON curren t 19[...]

  • Page 57

    55 CHAPT ER 4 SPECIFIC A T ION S 4 4.4 I/O Combined Module Specifications *1 Switching left side (F) provides the input (X 00 to X1F ) LE D indications, and switching right side (L) provides the output (Y00 to Y1F) LED indications. Derat ing char t Extern al connec tions T ermi nal co nnectio ns 60 02 0 4 0 Ambient temperature( ) 32 points, 45 0 30[...]

  • Page 58

    56 4.4. 2 LH42C4PT1P DC input/tr ansistor output combined m odule (Source type) Item Specificat ions App earan ce  Input specifica tions Number of inpu t points 32 poi nts Rated in put voltage 24VDC (ripple rate: 5% or less ) (Allo wable voltage r ange: 2 0.4 to 28. 8VDC) Rated in put cur rent 4 .0mA TYP . (at 24V DC) Input ON voltage/ON curren [...]

  • Page 59

    57 CHAPT ER 4 SPECIFIC A T ION S 4 4.4 I/O Combined Module Specifications *1 Switching left side (F) provides the input (X 00 to X1F ) LE D indications, and switching right side (L) provides the output (Y00 to Y1F) LED indications. Derat ing char t Exte rnal conn ections T erminal conne ctions 60 02 0 4 0 Ambient temperature( ) 32 points, 50 0 30 2[...]

  • Page 60

    58 CHAPTER 5 SYSTEM CONFIGURA TION (1) System configura t ion using I/O module An exam ple of overall s ystem configu ration using MELSEC-L series I/O modules is s hown below . (a) Mounting to a CPU module Power supply module CPU module Display unit (optional) I/O module Connector/terminal block converter module (optional) END cover Dedicated cable[...]

  • Page 61

    59 CHAPTER 5 SYSTEM CONFIGURA TION 5 (b) Mounting to a head module (2) Optional pr o ducts The follow ing optional p roducts c an be used for e asy wiring of modules. (a) Display unit This uni t has a liqui d crysta l display a nd can be att ached to t he CPU modul e. When att aching it to the CPU module, It enables confi rmation of sy stem cond it[...]

  • Page 62

    60 (3) Connection with the connector/t erminal block converter module (4) Connection with the re lay terminal module Dedicated cable with connector Connector/terminal block converter module Relay terminal module Dedicated cable with connector Relay terminal module[...]

  • Page 63

    61 CHAPTER 6 INST ALLA TION AND WIRING 6 6.1 Installation E nvironment and Installation Position CHAPTER 6 INST ALLA TION AND WIRING 6.1 Inst allation Environment an d Installation Position For inst allation en vironment and i nstallat ion position , refer to the fo llowing. MELSEC-L CPU Module User' s Manual (Hardware Design , Maintenanc e an[...]

  • Page 64

    62 6.2 Wiring 6.2. 1 Fo r the 18-point screw terminal block module (1) Precautions • Always us e a solderles s terminal of 0 .8mm or less in thickne s s. Up to two solderle ss terminals can be connecte d to one termi nal block. • A solderle ss terminal with insulati on sleeve can not be used f or a terminal blo ck. T o prevent a short when scre[...]

  • Page 65

    63 CHAPTER 6 INST ALLA TION AND WIRING 6 6.2 Wiring (3) Remova l procedure for the terminal block (4) Inst allation procedure for the terminal block 1. Open th e terminal cover a nd loosen the term inal block mounti ng screw . 2. Press the termi nal block fixing holes until the lowe r part o f the terminal bloc k is disengaged from t he module, and[...]

  • Page 66

    64 6.2. 2 Fo r the 40-pin co nnector type module (1) Precautions • Use coppe r wires having temperature ra ting of 75°C or m ore for the conne ctors. • T ighten the co nnector screw s within th e following s pecified torq ue range. (2) Applicable conne ctors The 40-p in connector for input module , output modu le, or I/O co mbined module is ob[...]

  • Page 67

    65 CHAPTER 6 INST ALLA TION AND WIRING 6 6.2 Wiring (3) Wir ing method for the 40-pin connector For the wi ring method, refe r to the following. MELSEC-L CP U Module Use r's Manual (Hard ware Design, Maintenanc e and Inspectio n) (4) Inst alling procedure for the 40-pin connector . (5) Remova l procedure for the 40 -pin connector 1. Plugging t[...]

  • Page 68

    66 6.3 Input Wiring Exa mples The foll owing show s wiring exampl es of the DC i nput module to connecta ble DC input equipment s (DC output ty pe). (1) Wiring exa mple with relay output type (2) Wiring exa mple with two wire DC type (3) Wiring exa mple with transistor output type (4) Wiring exa mple with voltage outpu t type DC input module Contac[...]

  • Page 69

    67 CHAPTER 6 INST ALLA TION AND WIRING 6 6.3 Input Wiring E xamples Avoid wiring shown below when connec ting with a volt age output type sensor . This wiring cause current to flow to the DC input module t hrough a pull-up resistor in a sensor . T herefore, input current may not reach ON current of the module and the I nput signal does not turn on.[...]

  • Page 70

    68 CHAPTER 7 V ARIOUS SETTINGS The foll owing setting s for I/O mod ule can be mad e with GX W orks2. • I/O respons e time settin g • Error time o utput mode setting 7.1 Input Resp onse Time Setting Perform th e following p rocedure. (When us ing GX Develope r Page 90, Appendix 4 (1)) 1. Open "I /O Assignment " of " PLC Parameter[...]

  • Page 71

    69 CHAPTER 7 V ARIOUS SETTINGS 7 7.1 Input Response Time Setting The pulse width that the input module takes as input data differs depending on the input res ponse time. The pulse width taken as input data differs depending on the input response time. Therefore, fully consider the operating env ironment when setting the i np ut response time, Input[...]

  • Page 72

    70 7.2 Error T ime Output Mode Setting Perform th e following p rocedure. (When us ing GX Develope r Page 90, Appendix 4 (2)) 1. Open "I /O Assignment" of " PLC Parameter". Project window [Paramet er] [PLC Parameter] [I/O Ass ignment] 2. Select "Output" or "I/ O Mix" i n "T ype". 3. Click th e butto[...]

  • Page 73

    71 CHAPT ER 8 TRO UBLESHO OTING 8 8.1 Troubleshooting for I n put Circuit CHAPTER 8 TROUBLESHOOT ING 8.1 T rou bleshooting for Input C ircuit (1) An input signal does not t urn off. (a) Case 1 (b) Case 2 Case Cause • The leaka ge cur rent of an input swit ch occur red. (e.g . drive b y a contact less swit ch) Action • Conne ct an appr opriate r[...]

  • Page 74

    72 (c) Case 3 (d) Case 4 Case Cause • A leaka ge curr ent occ urred due to the line capaci ty of a wiring cable . (The l ine capacity C of a tw isted pair cable is appro x. 100pF/m .) Action • Connect a n appro priate r esistor so that the vol tage across th e termin als of the input mo dule is lo wer than the OFF vo ltage (sa me acti on as the[...]

  • Page 75

    73 CHAPT ER 8 TRO UBLESHO OTING 8 8.1 Troubleshooting for I n put Circuit Calcul ation exam ple The resistan ce value of a con nected resistor is calc ulated by the f ollowing fo rmula. A swit ch with LE D indica tor tha t gene rates a cur rent le akage o f 2.82mA when 24VDC is suppli ed is con nected to the LX 40C6. Check the following with the sp[...]

  • Page 76

    74 (e) Case 5 (2) An input signal does not turn on. (AC input module) (3) A signal incorrectly inputs data. If excessive noise is pe riodically generated, setting t he response time shorter m ay be effective. 70ms  20ms Case Cause By usi ng two p ower supplie s, a sne ak path has been config ured. Action • Use on e powe r supply . • T o prev[...]

  • Page 77

    75 CHAPT ER 8 TRO UBLESHO OTING 8 8.2 Troubleshooting for Output Ci r cuit 8.2 T rou bleshoo ting fo r Output C ircuit (1) When the output is off, exce ssive volt age is applied to the load (triac output). (2) The load does not turn off (triac output). (a) Case 1 Case Cause • The load is half-wav e rectified interna lly . (In som e cases this is [...]

  • Page 78

    76 (b) Case 2 Case Cause • The l oad curre nt is lower th an the minimum load c urrent of the output modu le. • In such a case, th e load current flo ws into a photot riac as sh own abo ve because the tr iac does not opera te. If a n induct ive lo ad is connecte d with the loa d current flowin g into a photo triac, th e load m ay not turn off b[...]

  • Page 79

    77 CHAPT ER 8 TRO UBLESHO OTING 8 8.2 Troubleshooting for Output Ci r cuit (3) A load m o ment arily turns on when powe ring on the external power supply . Case Cause An incor rect ou tput occ urs due to floati ng capacitanc e (C) be tween co llector a nd emit ter of p hotocouple r . When a hi gh sensi tivity l oad (suc h as sol id state re lay) is[...]

  • Page 80

    78 (4) A load moment arily turns on from off when the sy stem is powered off (transistor output). Case Cause When an indu ctive load is conne cted, 2 ) Load may turn on fro m off due t o a dive rsion of back EMF at 1) S hutoff. Action T ake one of two a ction s shown below. Action 1 : T o sup press th e back EM F , conn ect a d iode to 3) paralle l[...]

  • Page 81

    79 CHAPT ER 8 TRO UBLESHO OTING 8 8.2 Troubleshooting for Output Ci r cuit (5) The loa d operates due to powering on the e x ternal power supply (tr a nsistor output). (6) The load operates by incorrect input due to chattering of the e xternal power supply . Case Cause • The pola rity of th e exter nal powe r supp ly is co nnecte d in reve rse. ?[...]

  • Page 82

    80 (7) When an output is turned on, a l oad connected to the other output is also turned on (transistor output (source type)). Case Cause If the wire connect ing 0V of a n exter nal power su pply and a comm on of a loa d is cut off or disconnecte d, a cur rent flows to the load tha t is off due to a parasitic circuit o f the o utput el ement tha t [...]

  • Page 83

    81 APPENDICES A Appendix 1 O ptional Items Appendix 1.1 Connector/terminal block converter m odules APPENDICES Appendix 1 Optional Item s Appendix 1.1 Connector/termi nal block converter modules (1) Included item (2) Applica ble connector/terminal block conv erter modules for the I/O modules *1 Applicable only when using the positive common type mo[...]

  • Page 84

    82 (3) Part na mes No. Name Descr iption 1) Panel m ounting holes Used to m ount the modul e to panel ( for incl uded scr ews(M4) ). 2) T erminal blocks Used to c onnect power su pply an d I/O sig nal wir es. 3) 40-pin connector Used to connect the AC  TB. ( Page 87, A ppendix 1.3 (1)) 4) Module joint leve rs Used to m ount t he mo dule to a [...]

  • Page 85

    83 APPENDICES A Appendix 1 O ptional Items Appendix 1.1 Connector/terminal block converter m odules (4) T erminal connections • A6TBXY36 B19 B20 B20 B19 B18 B18 B17 B17 B16 B16 B15 B15 B14 B14 B13 B13 B12 B12 B11 B11 B10 B10 B9 B9 B8 B8 B7 B7 B6 B6 B5 B5 B4 B4 B3 B3 B2 B2 B1 B1 A20 A20 A19 A19 A18 A18 A17 A17 A16 A16 A15 A15 A14 A14 A13 A13 A12 A[...]

  • Page 86

    84 • A6TBXY54 B20 B20 B19 B18 B17 B16 B15 B14 B13 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B9 B7 B6 B5 B12 B11 B10 B8 B6 B5 B4 B4 B3 B3 B2 B2 B1 B1 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A1 B20 B20 B19 B19 B18 B18 B17 B20 B20 B19 B19 B18 B1[...]

  • Page 87

    85 APPENDICES A Appendix 1 O ptional Items Appendix 1.1 Connector/terminal block converter m odules • A6TBX70 B20 B20 B19 B19 B18 B18 B17 B17 B16 B16 B15 B15 B14 B14 B13 B13 B12 B12 B11 B11 B10 B10 B9 B9 B8 B8 B7 B7 B6 B6 B5 B5 B4 B4 B3 B3 B2 B2 B1 B1 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A20 A19 A18 A17 A16 A15 A[...]

  • Page 88

    86 Appendix 1.2 Relay term inal m odule (A6TE 2-16S RN) The A6TE2-1 6SRN is used in pl ace of joint termin al blocks and in -panel rela ys for saving man-ho ur for wiring acros s a prog rammable contro ller , a relay term inal block an d relays in the control pa nel. For det ails on the relay terminal module and dedicated cabl es with conne ctor , [...]

  • Page 89

    87 APPENDICES A Appendix 1 O ptional Items Appendix 1.3 Dedicated cables with connect or Appendix 1.3 Dedicated cables with connector (1) For connec tor/terminal block converter module s *1 V oltage drop will grow due to the long length of the cables. When using the AC80TB or the AC100T B, keep the common current 0.5A or less. (2) For rel ay termin[...]

  • Page 90

    88 Appendix 2 Checking Se rial Number For che cking serial nu mber , refer to the following. MELSE C -L CPU Module User ' s Manu al (Hardware De sign, Maintenan ce and Insp ection) MELSE C -L CC- Link IE Field Netw ork Head Mo dule User's Ma nual[...]

  • Page 91

    89 APPENDICES A Appendix 3 Compatibility of L series and Q series I/O module Appendix 3 Comp atibility of L series a nd Q series I/O modu le The follo wing shows compati bility of I/O mo dules of L s eries and Q series. (1) 18-point s c rew terminal bl o ck module (2) 40-pin c onnector type module Item Compatibilit y with Q s eries Differen ces w i[...]

  • Page 92

    90 Appendix 4 When Using GX D eveloper This s ection describ es the metho d of the I/O mod ule settings with GX Developer . (1) Input response time se t ting Set the in put response ti me in I/O Assig nment of PLC Parame ter . Project win dow [Parameter] [PLC Pa rameter] [I/O Assign ment] The sett ing method i s the sam e as when us ing GX W orks2.[...]

  • Page 93

    91 APPENDICES A Appendix 5 E xternal Dimensions Appendix 5.1 I/O modules Appendix 5 Externa l Dimensions Appendix 5.1 I/O mod u les (1) 18-point s c rew terminal bl o ck 28.5 11 7 95 4 49 0 45 (45) 4 (Unit: mm) DIN rail center[...]

  • Page 94

    92 (2) 40-pin connector (a) 32-point module (b) 64-poi nt m odule 28.5 95 4 49 0 45 (45) 4 (Unit: mm) DIN rail center 28.5 95 4 49 0 45 (45) 4 (Unit: mm) DIN rail center[...]

  • Page 95

    93 APPENDICES A Appendix 5 E xternal Dimensions Appendix 5.2 Connectors Appendix 5.2 Connectors The c able may r un off f rom the ca ble cram p whe n th e siz e is thi nne r t han th at o f the c ram p. In that case, fix the c able by wing ing tape a round it. When t he cable is ma de of slippery m aterial, t ake anti-slip m easures such as winding[...]

  • Page 96

    94 Appendix 5.3 Connector/terminal block converter modules 89.6 120 48 52 5.5 17.3 44 78.5 48 52 124.6 155 5.5 17.3 44 78.5 48 52 159.6 190 5.5 17.3 44 78.5 A6TBXY36 A6TBXY54 A6TBX70 2- 4.5 Mounting holes (M4 25) Screws (M3.5) (Unit: mm) 2- 4.5 Mounting holes (M4 25) Screws (M3.5) (Unit: mm) 2- 4.5 Mounting holes (M4 25) Screws (M3.5) (Unit: mm)[...]

  • Page 97

    95 APPENDICES A Appendix 5 E xternal Dimensions Appendix 5.4 Cable for connecto r/terminal block c onverter module Appendix 5.4 Cable for connector/termin al block converter module 69.48 32.5 8.25 69.48 8.25 32.5 AC TB (Unit: mm)[...]

  • Page 98

    96 REVISIONS *The m anual number is given on th e bottom left of the back c over . Jap anese manu al version SH-0808 72-I © 2010 MITSUBISHI ELECTRIC CORPORA TION Prin t date *Manual n umber Revisio n January 20 10 SH (NA)-08 0888EN G-A Firs t editio n April 2 010 SH(NA )-08 0888ENG -B Desc riptions r egard ing the LX41C 4 and L Y41N T1P are added [...]

  • Page 99

    97 W A RRANTY Pleas e confir m the fo llowing p roduct w arra nty details before us ing th is prod uct. 1. Gratis W arranty T erm and Gratis W arranty Range If any fault s or defects (hereinaf ter "Failure") fou nd to be the responsi bility of Mits ubishi occurs duri ng use of the product withi n the gratis warran ty term, the pr oduct sh[...]

  • Page 100

    98 TRAD EMARKS Micros oft, Windo ws, Windows V ista, Wi ndows NT , Windows XP , Windows Server , Visi o, Excel, Power Point, V i sual Bas ic, V isual C++, and Ac cess are eit her registered trad emarks or tradem arks of Microsof t Corporation in the Unite d S tates , Jap an, and other cou ntries. Intel, Pe ntium, and C e leron are either regist ere[...]

  • Page 101

    [...]

  • Page 102

    SH(NA)- 080888E NG-G(1 407 )MEE MODEL: L-IO -U-E MODEL CODE: 13JZ34 Specifications subject to change without notice. When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission. HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN N[...]