English dropdown-ico

Metra Electronics AW-200GM manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Metra Electronics AW-200GM, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Metra Electronics AW-200GM one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Metra Electronics AW-200GM. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Metra Electronics AW-200GM should contain:
- informations concerning technical data of Metra Electronics AW-200GM
- name of the manufacturer and a year of construction of the Metra Electronics AW-200GM item
- rules of operation, control and maintenance of the Metra Electronics AW-200GM item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Metra Electronics AW-200GM alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Metra Electronics AW-200GM, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Metra Electronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Metra Electronics AW-200GM.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Metra Electronics AW-200GM item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION APPLICA TIONS 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-2001, A W-200GM WIRING & ANTENNA CONNECTIONS (Sold Separa tely) Wiring Harness: Please see www.metraonline.com for specific interface applications Antenn a Adapter: • 40-[...]

  • Page 2

    99-2001, AW -200GM Applications K NO WLEDGE IS P OW ER E nhance your installation and fabrication skills by enrolling in the most re cognized and re spected mobile electronics school in our industry . Log onto www.installerinstitute.com or call 800-354-6782 for mo re information and take steps toward a better tomorrow . Metra recommends MECP certif[...]

  • Page 3

    3 99-2001, AW -200GM T able of Contents Dash Disassembly Buick Century 1997-2005 5 Le Sabre 1995-2005 6 Park Avenue 1995-2005 6 Rainier 2004-2007 22 Regal 1995-2004 5 Rendezvous 2002-2007 7 Riviera 1996-1999 8 Roadmaster 1995-1996 9 Skylark 1996-1998 10 Cadillac Escalade/EXT 2003-2006 11 Chevrolet Avalanche 2003-2006 11 Blazer 2002-2005 12 Cavalier[...]

  • Page 4

    4 99-2001, AW -200GM T able of Contents (continued) Isuzu Ascender 2003-2005 22 I-290/I370 2007-2008 14 I-280/I350 2006 14 Oldsmobile Achieva 1996-1998 25 Alero 1999-2004 25 Aurora 1995-2003 26 Bravada 1998-2001 12 Bravada 2002-2004 22 Cutlass 1997-1999 26 Cutlass Supreme 1995-1997 26 Eighty-Eight 1994-1999 27 Intrigue 1998-2002 27 LSS 1996-1999 28[...]

  • Page 5

    5 Dash Disassembly 99-2001, AW -200GM Buick Century 1997-2005 Buick Regal 1995-2004 1. Remove the plastic trim piece to the left of the glove box and (1) Phillips screw exposed. 2. Unsnap the top edge of the knee bolster panel. 3. Remove (1) Phillips screw from the panel. 4. Remove the ashtray cluster and (2) Phillips screws from each side. 5. Uncl[...]

  • Page 6

    6 Dash Disassembly 99-2001, AW -200GM Buick Le Sabre 1995-1999 Buick Park A venue 1995-1999 Buick Le Sabre 2000-2005 Buick Park A venue 2000-2005 1. Unsnap the climate control trim panel (from door to door) and remove (4) Phillips screws exposed. 2. Pop out the a/c vents and remove (1) Phillips screw exposed in each vent cavity . 3. Unclip the radi[...]

  • Page 7

    7 Dash Disassembly 99-2001, AW -200GM Buick Rendezvous 2002-2007 1. Open center console and remove 2 screws at front of console opening. (Figure A) 2. Remove liners from cup holders and storage pocket next to cup holders, then remove screws. Unsna p and remove panel. (Figure B) 3. Remove (2) screws from bottom of radio/climate control bezel, unclip[...]

  • Page 8

    8 Dash Disassembly 99-2001, AW -200GM Buick Riviera 1996-1999 1. Unsnap left side panel exposing (1) Phillips screw to remove. 2. Remove (1) Phillips screw and unsnap right side panel to expose (1) Phillips screw beneath panel and remove. 3. Unsnap underside of overhanging dash to unsnap (6) plastic rivets and remove panel. 4. Remove (5) hex head s[...]

  • Page 9

    9 Dash Disassembly 99-2001, AW -200GM Buick Roadmaster 1995-1996 1. Unclip dash panel sides and remove. 2. Unclip panel below steering column and remove. 3. Remove (2) 7 mm screws above instrument cluster . 4. Set parking brake, turn car on, and move shifter to the lowest gear . T ilt steering wheel down then unsnap entire instrument cluster/radio [...]

  • Page 10

    10 Dash Disassembly 99-2001, AW -200GM Buick Skylark 1996-1998 1. Remove (6) 9/32” screws inside glove box. 2. Under glove box and drivers knee bolster , remove (2) plastic panels by turning (2) 1/4 turn fasteners per side. 3. Remove (4) 9/32” screws revealed. (2 per side). 4. Unsnap panel from driver’ s side to passenger’ s side. 5. Remove[...]

  • Page 11

    11 Dash Disassembly 99-2001, AW -200GM 1. Unsnap and remove dash bezel. 2. Remove (3) 9/32” screws and remove radio. Continue to kit assembly Cadillac Escalade 2003-2006 Chevrolet A valanche 2003-2006 Chevrolet Silverado/Classic 2003-2007 Chevrolet Suburban 2003-2006 Chevrolet T ahoe 2003-2006 GMC Sierra/Classic 2003-2007 GMC Y ukon/Denali/XL 200[...]

  • Page 12

    12 Dash Disassembly 99-2001, AW -200GM Chevrolet Blazer 2002-2005 Chevrolet S-10 2002-2004 GMC Sonoma 2002-2004 Oldsmobile Bravada 1998-2001 1. Remove (2) 9/32” hex-head screws from the knee bolster panel. 2. Pull down on the panel and remove the 9/32” hex-head screws exposed on the bottom of the dash trim bezel. 3. Remove (1) Phillips screw ab[...]

  • Page 13

    13 Dash Disassembly 99-2001, AW -200GM Chevrolet Cavalier 2000-2005 1. Open drivers door and remove fuse panel on end of dash. 2. Open passenger door and remove panel on end of dash. 3. Remove (1) Phillips screw from each side exposed. 4. Remove (3) screws from top of glove box liner . 5. Remove (2) screws from the top-left corner of the glove box [...]

  • Page 14

    14 Dash Disassembly 99-2001, AW -200GM Chevrolet Colorado 2004-2008 GMC Canyon 2004-2008 Isuzu I-290/I-370 2007-2008 Isuzu I-280/I-350 2006 1. Unsnap and remove the entire panel surrounding the radio and A/C controls. (Figure A) 2. Remove (3) 9/32”screws securing the radio to remove. (Figure B) Continue to kit assembly (Figure B) (Figure A)[...]

  • Page 15

    15 Dash Disassembly 99-2001, AW -200GM Chevrolet Express V an 2001-2002 GMC Savanna 2001-2002 1. Unsnap and remove small trim panel below steering column. (Figure A) 2. Unsnap radio/climate/instrument panel. (Figure B) 3. Move shift lever to first gear position. 4. Rotate panel counterclockwise to lift over steering column and remove. 5. Remove (3)[...]

  • Page 16

    16 Dash Disassembly 99-2001, AW -200GM Chevrolet Express V an 2003-2007 GMC Savanna 2003-2007 1. Remove (2) 10 mm bolts from below knee bolster under steering column and remove panel. (Figure A) 2. Remove (2) 10 mm bolts from panel below passenger dash airbag and remove panel. (Figure B) 3. Remove (2) 10 mm nuts from inside center pocket between po[...]

  • Page 17

    17 Dash Disassembly 99-2001, AW -200GM Chevrolet Impala 2000-2005 Ch ev rol et Malibu 2001-2003 Ch ev rol et Malibu Classic 2004-2005 1. Unclip each side of the dash trim bezel (fuse access) and remove (1) Phillips screw exposed on each side. 2. Remove (2) Phillips screws under the instrument cluster . 3. Unclip the trim panel above the pedals. (It[...]

  • Page 18

    18 Dash Disassembly 99-2001, AW -200GM Chevrolet Monte Carlo 2000-2005 1. Unclip the trim panel above the pedals. (It is NOT necessary to remove the panel it may be left hanging). 2. Remove (2) 9/32” screws from the knee panel and unclip the panel. 3. Unsnap the driver’ s side fuse panel cover and remove (1) 9/32” screw. 4. Open the glove box[...]

  • Page 19

    19 Dash Disassembly 99-2001, AW -200GM Chevrolet T railblazer 2002-2009 1. Remove (2) Phillips screws inside instrument cluster . 2. Remove (1) Phillips screw under climate controls to the left of the power outlet. 3. Remove (2) 7 mm hex heads from under steering column and lower the panel. Remove (3) Phillips screws around steering wheel. 4. Unsna[...]

  • Page 20

    20 Dash Disassembly 99-2001, AW -200GM Chevrolet V enture 2000 Oldsmobile Silhouette 2000 Pontiac Montana 2000 (Except SV6) 1. Remove the ashtray and (1) phillips screw exposed in the ashtray cavity . 2. Remove (1) Phillips screw from the cigarette lighter compartment. 3. Remove (2) Phillips screws securing the factory head unit and disconnect the [...]

  • Page 21

    21 Dash Disassembly 99-2001, AW -200GM Chevrolet V enture 2001-2005 Oldsmobile Silhouette 2001-2004 Pontiac Montana 2001-2005 (Except SV6) 1. Open cup holders and remove (2) Phillips 7 mm screws. (Figure A) 2. Unsnap and remove dual power outlet assembly from lower storage. 3. Open lower storage door and remove (2) 7mm screws inside. 4. Models with[...]

  • Page 22

    22 Dash Disassembly 99-2001, AW -200GM GMC Envoy 2002-2007 Isuzu Ascender 2003-2005 Oldsmobile Bravada 2002-2004 Buick Ranier 2004-2007 1. Remove (4) Phillips screws, (2) from left and (2) from right of carpeted panel. (Figure A) 2. Slide carpeted panel down and backwards to reveal (2) Phillips screws and remove. (Figure B) 3. Unsnap radio bezel an[...]

  • Page 23

    23 Dash Disassembly 99-2001, AW -200GM Hummer H2 2003-2007 1. Open center console and remove (4) 9/32” screws from console box and remove box. (Figure A) 2. Remove (4) phillips screws from hinge on console door inside console and remove door . (Figure B) 3. Loosen (1) T -15 torx on forward facing side of shift lever and pull up to remove (Figure [...]

  • Page 24

    24 Dash Disassembly 99-2001, AW -200GM Hummer H2 2003-2007 7. Remove (1) 10 mm bolt to right of shift lever . (Figure A) 8. Remove (2) Phillips screws from under console box on drivers side and (2) Phillips screws from under console trimtop on passenger side. (Figure A) 9. Slide control assembly rearwards. (Figure B) 10. Remove (2) T -30 torx bolts[...]

  • Page 25

    25 Dash Disassembly 99-2001, AW -200GM Oldsmobile Achieva 1996-1998 Oldsmobile Alero 1999-2004 1. Open the glove box, press inward on the walls of the glove box liner and remove the liner . 2. Remove (10) torx-head screws from the glove box location. 3. Remove (2) 9/32” hex-head screws under the steering column. 4. Unclip the dash trim bezel. 5. [...]

  • Page 26

    26 Dash Disassembly 99-2001, AW -200GM Oldsmobile Aurora 1995-2003 Ol ds mob ile Cutlass 1997-1999 Ol ds mob ile Cutlass Supreme 1995-1997 1. Unclip the radio trim bezel and remove the bezel. 2. Remove (2) 7 mm screws securing the factory head unit and disconnect the wiring. Continue to kit assembly 1. Unclip the radio trim bezel and remove. 2. Rem[...]

  • Page 27

    27 Dash Disassembly 99-2001, AW -200GM Oldsmobile Eighty-Eight 1994-1999 Oldsmobile Ninety-Eight 1994-1996 Oldsmobile Intrigue 1998-2002 1. Unclip the radio trim bezel and remove. 2. Remove (2) ) 9/32” hex-head screws securing the factory head unit and disconnect the wiring. Continue to kit assembly 1. Open the glove box and remove (2) hex-head s[...]

  • Page 28

    28 Dash Disassembly 99-2001, AW -200GM 1. Open glove box and remove two-center trim bezels attached by screws. (Figure A) 2. Unsnap and remove radio trim bezel. (Figure A) 3. Remove (3) 9/32” hex-head screws and remove radio. (Figure B) Continue to kit assembly (Figure A) (Figure B) Ol ds mob ile LSS 1996-1999 Ol ds mob ile Regency 1997-1998[...]

  • Page 29

    29 Dash Disassembly 99-2001, AW -200GM Pontiac Aztec 2001-2005 Pontiac Bonneville 2000-2005 1. Pull out cup holder inserts. 2. Remove (1) Phillips screw exposed inside bottom cup holder . 3. Unsnap and remove shifter trim with cup holders. 4. Remove (2) #15 torx at bottom of radio/ climate bezel. Continue to kit assembly (Figure A) (Figure B) (Figu[...]

  • Page 30

    30 Dash Disassembly 99-2001, AW -200GM Pontiac Grand Am 2001-2005 Pontiac Sunfire 2000-2005 1. Unsnap and remove radio trim bezel. 2. Remove (3) 9/32” screws from radio brackets and remove radio. Continue to kit assembly 1. Open the glove box and remove (2) Phillips screws exposed on the right edge of the radio trim bezel. 2. Unclip the bezel and[...]

  • Page 31

    31 Kit Assembly 99-2001, AW -200GM All vehicles – DIN head unit provisions (Figure A) (Figure B) 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation. Note:When installing a DIN head unit you will [...]

  • Page 32

    32 Kit Assembly 99-2001, AW -200GM All vehicles – Shaft head unit provisions 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation. 1. Slide the aftermarket head unit into the kit from the back and [...]

  • Page 33

    Notes[...]

  • Page 34

    Notes[...]

  • Page 35

    Notes[...]

  • Page 36

    METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-2001, A W-200GM REV . 6/08/11[...]