English dropdown-ico

Lincoln Series 1000 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Lincoln Series 1000, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Lincoln Series 1000 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Lincoln Series 1000. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Lincoln Series 1000 should contain:
- informations concerning technical data of Lincoln Series 1000
- name of the manufacturer and a year of construction of the Lincoln Series 1000 item
- rules of operation, control and maintenance of the Lincoln Series 1000 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Lincoln Series 1000 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Lincoln Series 1000, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Lincoln service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Lincoln Series 1000.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Lincoln Series 1000 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    1000service exp REV: 1/5/07 SER VICE MANU AL (INTERN ATION AL) IMPING ER CONVEYOR O VENS MODEL SERIES 1000 & 1200 Lincoln Foo dservice Products, LLC 1111 North Hadley Road Fort W ayne, Indiana 46804 United States of America Phone : (800) 374 -3004 U.S. Fax: (888 ) 790-8193 • Int’l Fax: (260 ) 436-0735 Technical Service Hot Line (800) 6 78-9[...]

  • Page 2

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 2 TABLE OF CONTENTS TABLE OF CO NTENT S....................................................................... .......................................................................2 SEQUENC E OF OPER ATION S 1002/100 3 ..................................................................[...]

  • Page 3

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 3 SEQUENCE OF OPERATIONS 1002/100 3 MODEL 10 02 - 240VAC - 50HZ - NATURAL GAS MODEL 10 03 - 240VAC - 50HZ - L.P. GAS POW ER SUPPLY Electrical Po wer to be sup plied to the Oven b y a thre e conductor s ervice. Black conduc tor is Hot Red conductor is Neu tral Green cond uctor is Gro und[...]

  • Page 4

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 4 TIME T EMP DISPLAY The T ime/Temp D isplay is energ ized when the Fan S witch is closed, suppl ying 120 VAC to the primar y of the 12.6 vo lt Transf ormer. T he secondar y output of the transform er, norm ally 13 to 14 VAC ( depend ing on inp ut), with a ce nter tap, is supplied to t [...]

  • Page 5

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 5 increase or decrease as the DC voltage fr om the boar d increas es or decreases respectivel y. As the m otor turns, it drives both t he redu cer gearbox and the T ach. Generator. T he T ach. Generator is a DC volta ge gene rator, which s upplies a voltage to the DC m otor contro l boa[...]

  • Page 6

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 6 CONVEYOR DR IVE (S/N 100 to 43 89) Closing the Fa n Switch and the norm ally open Conv eyor Switch s upplies 12 0 VAC through a 3A F use, to th e Motor C ontrol Board. AC v olts are conver ted to D.C. volts and are sup plied to the C onve yor Motor at b oard term inals A1 an d A2 thro[...]

  • Page 7

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 7 14 VAC) w ith a center ta p, and su pplies po wer to the Time/T emp Displa y. The voltage fr om eac h leg of the T ransform er' s secondar y to the cent er tap shou ld be one half of the secondar y voltage BURNER CI RCUIT Closing the n orm ally open Burner Switch s upplies 2 20 V[...]

  • Page 8

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 8 Fan, and the H eat and Conve yor Switches. TRANSFO RMER (12. 6 VAC) Upon closure of the Fan Switch, 120 VAC is su pplied to the prim ary of the 12. 6 VAC Transf ormer. The T ransform er steps the vo ltage down to 12.6 VAC ( norm ally 13 to 14 VAC) w ith a center ta p, and su pplies po[...]

  • Page 9

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 9 oven start a nd cool do wn rela y. Its normall y open contacts close, sup plying 220 VAC to the Burner Switch an d enabling th e 20-m inute Tim e Delay m odule. The 20-m inute Time D elay module sup plies 120 VAC to the oven fan motor relay, these norm ally open contacts now clos e, s[...]

  • Page 10

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 10 SEQUENCE OF OPERATIONS 1042 / 1043 / 1242 / 1243 MODEL 10 42 - 240V - 50 HZ - NATURAL G AS MODEL 10 43 - 240V - 50 HZ - L.P. GAS MODEL 12 42 - 240V - 50 HZ - NATURAL G AS/DUA L BELT MODEL 12 43 - 240V - 50 HZ - L.P.GAS/DUA L BELT POW ER SUPPLY Electrical Po wer to be sup plied to the[...]

  • Page 11

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 11 TIME/T EMP DISPLAY(S /N Q14790 & Below, 120 0 series S/N Q14973 & Be low, 1000 series) (S/N Q14791 & Above, 1200 series S/N Q1497 4 & Above, 1000 series r efer to Pg. 9) The T ime/Temp. D isplay is energ ized when the Fan S witch is closed, suppl ying 120 VAC to the p[...]

  • Page 12

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 12 SCHEMATIC / 1002 , 1003[...]

  • Page 13

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 13 SCHEMATIC / 1006 TO SERIAL NUMBERS Q 14279[...]

  • Page 14

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 14 SCHEMATIC / 1028 , 1029, S/N Q19 071 & BELOW[...]

  • Page 15

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 15 SCHEMATIC / 1028 , 1029, S/N Q19 078 & ABOVE[...]

  • Page 16

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 16 SCHEMATIC / 1030 , TO S/N Q17170[...]

  • Page 17

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 17 SCHEMATIC / 1030 , S/N Q17171 & ABOVE[...]

  • Page 18

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 18 SCHEMATIC / 1032 . S/N Q19077 & BE LOW[...]

  • Page 19

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 19 SCHEMATIC / 1032 , S/N Q19078 & ABOVE[...]

  • Page 20

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 20 SCHEMATIC / 1033 , 1034, 1046 , 1047[...]

  • Page 21

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 21 SCHEMATIC / 1042 , 1043, S/N Q14 279 & BELOW[...]

  • Page 22

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 22 SCHEMATIC / 1042 , 1043, S/N Q14 280 & ABOVE[...]

  • Page 23

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 23 SCHEMATIC / 1228 . 1229, S/N Q14 790 & BELOW[...]

  • Page 24

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 24 SCHEMATIC / 1228 , 1229, S/N Q14 791 & ABOVE[...]

  • Page 25

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 25 SCHEMATIC / 1242 , 1243[...]

  • Page 26

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 26 TROUBLESHOOTING GUIDE 1000 & 1200 / GAS OVENS SYM PTOM POSSIBLE C AUSE EVALU ATION Incom ing Power Supp ly Check breakers / Reset if require d / Call Po wer Co. if needed. (Export Ov ens) For som e export ovens , there is a con trol circ uit step-down tr ansform er. This tr ansfo[...]

  • Page 27

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 27 Burner S witch Check for 120 VAC to neutral on b oth sides of switch. If s witch is closed and 1 20 VAC is pres ent on one side o nly, repl ace the switch. Air Pressur e Switch Check for 120 VAC on both s ides of switch. If voltage prese nt on one s ide on ly, check for air tube bloc[...]

  • Page 28

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 28 Flame Sensor (Ther e should be a visib le pilot flam e at this tim e.) To check for proper f lame sensor op eration, connect a di gital multim eter (capabl e of m easuring D. C. m icroamperes ) in series bet ween the flam e sensor wire (n orm ally connected t o term inal #4) and term[...]

  • Page 29

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 29 Burner Ign itor Check the burner ignit or head for any obstruct ions, also check for fra yed or brok en wire, an y type of damage to s park gap (.1 00 in. 2.5 m m) If there is visible dam age, replac e ignitor ass embl y. Pilot flam e but no m ain flame Spark Ignitor (Flam e Sensor) [...]

  • Page 30

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 30 Light#4 in 24 VAC at ter minal #6 of Johnson c ontrol va lve or "24V " on Hone ywell C ontrol. Light#5 in 24 VAC at ter minal #1 of Johnson c ontrol va lve or "PV " on Hone ywell C ontrol. Light#6 in 24 VAC at ter minal #3 of Johnson c ontrol va lve or "MV &q[...]

  • Page 31

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 31 Model 1030 - 1031 SYM PTION POSSIBLE CAUSE EVUAL ATION Gas Suppl y Manual G as Shut-Off Valve Check for adequate gas s uppl y to oven. Ch eck to see that m anual shut-of f valve is o pen. Fan Switch Check to see that the f an switch is on Main Oven Fa n Check if main oven f an is ope[...]

  • Page 32

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 32 Ignitor/Sensor Assem bly Check for visible dam age to ignit or/ sensor assembl y. If there is no visible dam age to the components, and no sp ark, replace the spark generator. If there is visible dam age to the I gnitor sensor ass embl y , rep lace it. Also check for fra y ed or dam [...]

  • Page 33

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 33 Interm ittent heating As Follows Both the m ain fan m otor and burn er blower m otor are equippe d with therm al protecti on and wi ll cease to operate if overheatin g occur s. This c an cause the units to c ycle on an d off int erm ittently. This m ay be caused b y improper ventilat[...]

  • Page 34

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 34 Speed Adjus tment Potentiom eter This is a 0 to 5 K ohm , 10 turn potent iometer . W ith power off , rem ove the red, black and white pot leads fr om the m otor control boar d at term inals P1,P2, and P3. W ith a digital m ultimeter, c heck the ohm r eading across the red lea d (P3) [...]

  • Page 35

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 35 Tach generator and DC M otor Control Board W ith the power to the DC m otor control board turned off , remove the leads f rom term inals T1 and T2. Place the t est leads of a digit al meter on the tach leads, t urn power o n, and the m eter read ing should be ap proxim ately 30 to 35[...]

  • Page 36

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 36 Speed Adjus tment Potentiom eter This is a 0 to 50k ohm , 10 turn pot entiom eter. W ITH POWER O FF: rem ove the 3-pin potentiom eter cable plu g from the motor c ontrol board. W ith a digital m ultimeter, chec k the ohm reading ac ross the red lead to th e black lead. This reading s[...]

  • Page 37

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 37 Therm ocouple Probe Place your p yrom eter therm ocouple into the c enter between fin gers T 2 and T3 in t he oven. For ovens with Mech anical Measur e D.C. m illivolts at Therm ostat terminals 9 and 10 on th e tim e/temp display. See t herm ocouple chart on page 59 f or proper readi[...]

  • Page 38

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 38 Conve yor Drive (Stepper) Mot or Perform all check as in the above evaluation. If the time check is ok , refer to the next s ection. Chec k to see if the co nveyor dri ve (stepper) m otor is r unning. If motor is not running, ref er to "C onve yor will not run" on Pag e 35.[...]

  • Page 39

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 39 TROUBLESHOOTING GUIDE 1000 & 1200 SERIES / ELE CTRIC OVENS SYM PTOM POSSIBL E C AUSE EVALUATION Incom ing Power Supp ly Check breakers /Reset if require d/ Call Po wer Co. if needed. (Export Ov ens) For som e export ovens , there is a con trol circ uit step-down tr ansform er. Th[...]

  • Page 40

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 40 Tem perature Control Board Check for 120 VAC in put to tem perature contr ol board. If not pr esent, ch eck wiring f rom fuse holder to temper ature control board. T urn the tem perature adjustm ent dial to the m axim um temperature position Chec k f or 120 VAC at c oil of m ercur y [...]

  • Page 41

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 41 Speed Contro l Potenti ometer This is a 0 to 400 ohm or 0 to 50 0 ohm , 10-turn potentiom eter. W ITH POWER OFF : rem ove the red, white, an d black leads f rom term inals S1, S2, S3. W ith a digital multim eter, c heck the ohm reading ac ross the red to black leads. T his ohm readin[...]

  • Page 42

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 42 DC Motor Co ntrol Boar d Check for 120 VAC in put to the co ntrol bo ard at term inals L1 and L2. If no t pres ent, check the conveyor s witch and wiring back to 3-am p fuse and then back to power so urce if necessar y . If 120 VAC is present at L 1 and L2, c heck the VDC outp ut at [...]

  • Page 43

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 43 Voltage Supp ly Check inc oming voltag e suppl y at Line 1 to ne utral. There s hould be a voltag e read ing of 120 VAC. Fan Switch See proced ure for c hecking on page 26. Conve yor Switch Check for 120 VAC to co nveyor s witch. If no voltage is pr esent, trac e wiring back to the f[...]

  • Page 44

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 44 Time/T emp Displa y 12.6 VAC P ower Suppl y Measure the transform er prim ar y inoperat ive for a nominal 120 VAC input . Meas ure the sec ondary voltage outpu t which will be 12.5 to 15 VAC norm ally. Recheck secondar y output at rear of Time/T emp Displa y. Term inals 1 to 3 should[...]

  • Page 45

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 45 Time displa y inaccurate erratic, or inoperative Perform all checks as in the abov e evaluatio n. If the tim e check is ok ay, refer to the next sect ion optical encoder . Optical Enco der The above t ime/tem p test should h ave alrea dy been perfor med. Rem ove dus t cover from the [...]

  • Page 46

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 46 TROUBLESHOOTING / GAS OVENS 10 33, 1034, 1046, 104 7 SYM PTOM POSSIBL E C AUSE EVALUATION Incom ing Power Supp ly Check breaker/r eset if required. C all Power Com pany if needed. I n these ovens, t here is a control circu it step-do wn transf ormer . This transform er steps down sup[...]

  • Page 47

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 47 Incom ing Power Supp ly Check circuit break ers, reset if requ ired. Call t he Power Co. if needed. Fuse T ransformer Check , replace if nec essary. Fuseholder Check, replace if necessary. Cooling Fan Therm ostat Check the cooling f an therm ostat (Therm ostat closes at 120° F and o[...]

  • Page 48

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 48 Spark G enerator After a pre-p urge tim e of 30 to 60 s econds af ter blower m otor starts , check for 220 VAC to s park generator. If voltage is no t pres ent, check reset button on i gnition contr ol. If volta ge is present , visually chec k for s park at ignitor head. Ignitor/Sens[...]

  • Page 49

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 49 Tem perature Control Check for 120 VAC acr oss L1 and L 2 on temper ature control bo ard. If no vo ltage is pres ent, retrace wiring back to power suppl y. Turn the temper ature adjustm ent knob to the max imum temper ature position a nd check for 120 VAC at the load term inal to neu[...]

  • Page 50

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 50 Main Flam e will not stay lit Flame Monitor (T here should be a v isible m ain flame at this t ime.) To check for flam e monitor operat ion, con nect a digital volt m eter (c apable of measuring D.C. m icro amper es) between the f lame sens or and t erminal #15 on the f lame m onitor[...]

  • Page 51

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 51 Conve yor Drive(Stepper ) Motor Check the drive sprock et on m otor output s haft to insure that it is tight. Chec k motor windings meas urement should be approx imately 2 ohm s. Term inals 1-5, 2-6, 3-7, 4-8. W ITH POW ER OFF : Turn the m otor shaf t to check for jamm ed gear box. I[...]

  • Page 52

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 52 Tem p. display inaccurate, er ratic, or inoperative Time/T emp. Displa y Perform the power supp ly check , the therm istor probe chec k, and then p erform the time/tem p. sim ulator test. Refer to page 72 f or instruc tions. Rem ember, when using t he tim e/tem p. simulator, rem ove [...]

  • Page 53

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 53 REMOVAL, INST ALLA TION & ADJUSTMENTS CAUTION ! BEFORE R EMOVING O R INST ALLING AN Y COMPO NENT IN T HE IMPING ER OVEN BE SU RE TO D ISCONNECT ELECT RICAL POW ER AND G AS SUPPL Y MOTO R, M A IN F AN 1. Shut off power at m ain break er. 2. Rem ove flue by tak ing out the t wo (2)[...]

  • Page 54

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 54 9 3/4 IN. ± 1/8 IN. COOLING FAN FAN BLADE 3. Reinstall an d locate f an so that t he front of f an blades are 9 3/4" f rom inside of oven bac k. (See Dra wing) S. N. 4613 & Above (G AS) S. N. 4768 & Above (EL ECT RIC) FAN HUB CONE FAN SPIDER 1 1/2 INCH NOTE: M EASUREMEN[...]

  • Page 55

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 55 3. Rem ove lead wires and m ark f or reassem bly. 4. Rem ove two (2) s crews an d rem ove thermostat. 5. Reas sem ble in reverse ord er. BURNER BL OWER M OTOR 1. Shut off power at m ain break er. 2. Rem ove control pane l top and fr ont panel. NOT E: Complete burn er blower m otor as[...]

  • Page 56

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 56 MOTOR CE NTRIFUGAL SWITCH RED RED 24 VAC T O IGNITION CONTROL TO GROUN D TERM INAL ON IGNITION CONT ROL GROUND 24 VAC 120 VAC GREEN WHITE BLACK (BUTTSP LICE CONNE CTORS P ROVIDED FOR 120 V AC POW ER S UPPL Y) WIRING DIAGRAM BURNER BLO WER ASSE MBLY WITH RE LAY RE MOVE D TRANSFORM ER [...]

  • Page 57

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 57 BURNER ASSEM BLY 1. Shut off power at m ain break er. 2. Shut off gas suppl y. 3. Rem ove control pane l top and fr ont panel. 4. Rem ove gas control va lve (See "GAS CONT ROL VAL VE") 5. Disconnect pilot tube. 6. Rem ove thermostat or solenoid val ve. 7. Rem ove four (4) p[...]

  • Page 58

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 58 control val ve and insta ll the adapter fitting and manometer . 3. Turn on elec tric power and gas an d start-up oven. 4. W ith oven at full fire, m anifold pres sure shou ld be (3.5 " W .C. NAT /10" W .C. LP). 5. Turn off electric power and gas, r eplace co ver scre w, rem[...]

  • Page 59

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 59 MERC URY CONT ACTOR 1. Shut off power at m ain break er. 2. Rem ove control pane l top and fr ont cover. 3. Disconnect co ntactor wires and m ark f or reinstallation. 4. Rem ove screws from m ounting bracket and re place co ntactor. NOT E: Be sure contac tor is not m ounted ups ide d[...]

  • Page 60

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 60 IGNITIO N CONT ROL NOT E: W hen replacing Johnson Co ntrols, G -60 or G-6 5 Ignition Contr ol with the ne w Honeywell Ign ition contr ol, the 2 4 VAC burner tr ansf orm er (rated at 20VA) m ust be replaced with the larg er (rated at 40 VA) #36953 1 Trans form er. 1. Read all ins truc[...]

  • Page 61

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 61 1 24V 2 24V 24V 24V (GND) MV MV/PV PV GND BLUE FROM VALVE BLACK FROM VALV E #3 RED FROM VALV E TO PILOT LIGHT BUTT SPLICE AND NEW GREEN WIRE SUPPLIED IN KIT W HITE FROM PILOT LIGHT 2 MV/PV 4 GND 1 MV 3 PV 5 6 24V 24V GND 9 SPARK IGNITOR/SENSOR CABLE FROM BLOWER CENTRIFU GAL SWITCH #3[...]

  • Page 62

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 62 BURNER IG NITOR 1. Shut off power at m ain break er. 2. Rem ove control pane l top and fr ont cover. 3. Rem ove burner assem bly. 4. Rem ove flame s ensor. 5. Rem ove pilot shield and pilot shi eld extens ion. 6. Rem ove burner igniter . 7. Reassem ble in revers e order. NOT E: Be su[...]

  • Page 63

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 63 6. Reassem ble in revers e order. M A IN ORIFI CE - BURNE R 1. Shut off power at m ain break er. 2. Shut off gas suppl y. 3. Unbolt tem perature c ontrol valv e assem bly (see Tem perature Contr ol Valve) and c arefully rotat e to access main orifice brac ket. NOT E: Be sure not to d[...]

  • Page 64

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 64 5. Rem ove the sprock et from the conve yor motor shaft b y loosening th e set scr ews and sl iding the sprock et off the shaft. 6. Unplug the wiring harnes s for the m otor. 7. Disconnect the red and black wires f rom the term inals on the tach. ge nerator which is m ounted on the t[...]

  • Page 65

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 65 T A CH. GEN ERATOR 1. Shut off power at m ain break er. 2. Rem ove conve yor motor assem bly . 3. Rem ove tach. cover pla te and tach . Ieads. Mar k lead pos ition. 4. Rem ove 2 slotted sc rews from dust cover base and re m ove dust cover. 5. Loosen coup ling set s crew (.050 inch al[...]

  • Page 66

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 66 GND S 3 S 2 S 1 A 2 A 1 F 2 F 1 L 2 L 1 3 A. FUSE D. C. CONTROL BOARD "BODINE" S/N 100-4389 REG MIN MAX D. C. CONTROL BOARD "BODINE" S/N 100 4389 ( TOP VIEW ) 3 A. FUSE TERMINAL STRIP D. C. M OTOR CO NTROL BO ARD SN 4390 - 149 74 100 0 SERIES G AS OVENS SN 4390 - [...]

  • Page 67

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 67 4 A. FUSE 1 A. FUSE . RESISTOR L 1 A+ L 2 A - T 1 T 2 MAX MIN IR CL TACH BOARD P/N 369155 STY LE 1 P 3 P 2 P 1 4 A. FUSE 1 A. FUSE L 2 A - MAX MIN IR CL TACH T 1 T 2 L 1 A + " B " BOA RD P/N 369272 P 3 P 2 P 1 CHOKE STYLE 2 AN D ST YLE 3 CON TROL BOARD ADJUST MENT NOT E: A [...]

  • Page 68

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 68 CHOKE " B " BOARD P/N 369 272 P 1 1 A. FUSE L 2 A - T 1 T 2 L 1 A + P 3 P 2 MAX MIN BOARD P/N 369155 STYLE 2 4 A. FUSE L 1 A+ L 2 A - T 1 T 2 P 3 P 2 P 1 MAX MIN P1 CHOKE 1 A FUSE 4 A FUSE RE SISTOR 4 A FUSE L 1 L 2 A + A - T 2 T 1 S 3 S 2 S 1 MIN M AX CAPAC ITOR BOARD P/N [...]

  • Page 69

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 69 STEPPER CON TROL - ADJUSTM ENT S/N 14975 AND ABOVE 1000 SERIES G AS OVEN S/N 14792 AND ABOVE 1200 SERIES G AS OVEN Blue Gray Red Brown Red POW ER J 5 J 4 J 3 J 1 J 6 LOCKED ROTOR To T/T display POTENTIOM ETER Max . Conveyor Speed Ad j. Min. Conveyor Speed Ad j. TIME/T EMP Black to #4[...]

  • Page 70

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 70 REVERSING C ONV EYOR DIRE CTION SN 100-4389 (BODINE) 1. Shut off power at m ain break er. 2. Rem ove control pane l top. 3. Turn revers ing switch (l ocated o n relay box) to obtain d esired bel t direction. 4. Reassem ble in revers e order. SN 4390-149 74 100 0 SERIES G AS OVEN SN 4[...]

  • Page 71

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 71 BEARING, C ONVEYO R SN 2164 AND ABOV E 1. Rem ove conve yor from oven an d place on a f lat work surfac e. 2. Rem ove connecting l inks f rom conve yor belting. See Installat ion and Operat ing Ins tructions Manu al . 3. Rem ove conve yor belting from conveyor DRIVE END 4. Rem ove dr[...]

  • Page 72

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 72 TEM PERA T URE G AUGE - REPL ACEMENT 1. Shut off power at m ain break er. 2. Rem ove control pane l top. 3. Disconnect therm ocouple from temperature gau ge. 4. Rem ove two (2) mounti ng bolts and rem ove tem perature ga uge. 5. Reassem ble in revers e order. THERM ISTOR - REPLACEM E[...]

  • Page 73

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 73 ALL 1000 & 1 200 SERI ES OVEN S SWITC H SETT INGS 1 2 3 4 5 6 7 8 9 10 TYPE I OFF OFF* ON ON ON OFF* * TYPE II OFF O FF* OFF** ON O N O N TYPE III OF F OFF* O FF** ON O FF ON ON ON O FF O N (Baldor Motor ) TYPE III OF F OFF* O FF** ON O FF OFF ON ON OFF O N (Stepper M otor) TYPE [...]

  • Page 74

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 74 T y pe IV has a djustm ent pots . In the center board. If temper ature is still inac curate af ter above c alibration and troub leshooting, use the f ollowing to check the High Tem p. Pot. nor mally the H igh Tem p. Pot. does not require adjustm ent. Occas ionally the pot is accident[...]

  • Page 75

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 75 Dip Swit ch 1 2 3 4 5 6 7 8 9 10 TYPE I OFF OF F OFF ON OF F OFF TYPE II OFF OFF OFF OFF OFF O FF TYPE III OFF OFF OF F OFF OFF OFF OFF ON O FF ON NOT E: W hen on 50 HZ power, dip s witch #2 m ust be "ON" W ith power ON turn t ime and tem perature ca l. pot. full y counterc[...]

  • Page 76

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 76 THE FO LLOWIN G ITEMS ARE U SED IN TH E MO DEL 1030, 1046, 1047 IMPING ER OVEN (E XPORT ) AIR PRESSU RE SWIT CHES - R EPL ACEMENT AND ADJUSTM ENT 1. Rem ove control pane l top. 2. Disconnect wires from switch m aking note of wire number and locati on for reins tallation. 3. Rem ove a[...]

  • Page 77

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 77 IGNITIO N CONT ROL - REPL ACEMENT 1. Rem ove control pane l top and fr ont cover. 2. Loosen t wo (2) lock ing screws on f ront cover of rela y (approx. 1/2 t urn). 3. Rem ove front portion of rela y by pulling stra ight out (r ocking m otion). 4. Rem ove wires from plug-in term inal [...]

  • Page 78

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 78 BURNER ALARM LIGHT - REPL ACEMENT 1. Rem ove control pane l top and fr ont cover. 2. Rem ove two (2) wires f rom light assem bly, note wire n um ber and location. 3. Grasp bod y of light ass embly and s lide side ways to re move. 4. Reassem ble in revers e order and c heck . PILOT L [...]

  • Page 79

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 79 TEM PERA T URE CONT ROL PO TENT IOMETER - R EPL ACEMENT 1. Rem ove control pane l top and fr ont cover. 2. Rem ove one screw from control k nob guard an d m ove guard to o ne side. 3. Rem ove knob and lock nut on contr ol pot sh aft and pu shout. 4. Rem ove three (3) wires f rom temp[...]

  • Page 80

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 80 PARTS / MODEL SE RIES 1000 & 120 0 - GENERAL LETTER PART NO. DESCRIPT ION A 369003 Door Hing e B 369207 Handle Reta iner 369337 Retainer ( See Page E-18) C 369110 Access W indow (See Pa ge E-18) D 369209 Latch & Str ike E 369828 Handle Sp acer F 369157 Com plete Door G 1534 F[...]

  • Page 81

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 81 BLOW UP / 1000, 1200 – GENERAL[...]

  • Page 82

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 82 PARTS / MODEL 1002-1 003 , S/N 2584 TO 4389 LETTER P/N DES CRIPTION A 369012 Fuseholder B 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p C 369064 Conve yor Speed Contr ol Dial D 369066 Sprock et, Drive - Pr ior to S/N 439 0 E 369260 Switch, On/Of f F 350225 Lens, Red G 369104 Pilot Lig ht,[...]

  • Page 83

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 83 BLOW UP / 1002, 1003 – S/N 2584 TO 4389[...]

  • Page 84

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 84 PARTS / MODEL 10 02-1003, S/N 4390 & UP LETTER P/N DES CRIPTION A 369247 Shaft Lock Rin g B 357107 Fuse Holde r 369012 Fuse Holde r C 369013 Fuse, 3 Amp 369014 Fuse, 10 Amp D 369064 Conveyor Spee d Control Dial (Non-Digital Display Ovens) 369248 Knob E 369158 10 Tooth Sp rocket -[...]

  • Page 85

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 85 BLOW UP / 1002, 1003 – S/N 4390 & A BOVE[...]

  • Page 86

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 86 PARTS / MODEL 10 06 LETTER P/N DESCRIPT ION A 369247 Shaft Lock Ring B 357107 Fuse Holder C 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p D 369248 Knob E 369158 10 Tooth Sprocket - S/N 4390 & Above F 350705 Switch, ON/O FF G 369260 Double Po le Fan S witch H 350224 Lens, Yello w I 369[...]

  • Page 87

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 87 BLOW UP / 1006[...]

  • Page 88

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 88 PARTS / 1028 -1029-1032 LETTER P/N DES CRIPTION A 369247 Shaft Lock Ring B 357107 Fuseholder C 369014 Fuse, 10 Am p 369335 Fuse MDL Time Dela y, 1 Am p 369195 Fuse, 1 Am p FNM1 369304 Fuseholder f or FNM1 Fuse 369013 Fuse, 3 Am p D 369248 Knob 369064 Conve yor Speed Contr ol Dial (No[...]

  • Page 89

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 89 BLOW UP / 1028, 1029, 1032[...]

  • Page 90

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 90 PARTS/ MODEL 10 30 LETTER P/N DES CRIPTION A 369247 Shaft Lock Ring B 369248 Knob C 357107 Fuse Holder D 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p E 369260 Double Po le Fan S witch F 350224 Lens, Yello w G 369507 Coolin g Fan T hermostat H 369158 10 Tooth Sprocket I See Page 104 J 369[...]

  • Page 91

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 91 BLOW UP / 1030[...]

  • Page 92

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 92 PARTS / 1042 , 1043 LETTER P/N DES CRIPTION A 369378 Fan Motor, 2 30 VAC B 369247 Shaft Lock Ring C 369248 Knob D 357107 Fuse Holder E 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p F 369260 Double Po le Fan S witch G 350224 Lens, Yellow H 369067 Air Switch T ube I 369507 Cooling Fan Therm[...]

  • Page 93

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 93 BLOW-UP / 104 2, 1043[...]

  • Page 94

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 94 PARTS / 1033 , 1034, 1046, 1047 LETTER P/N DES CRIPTION A 369247 Shaft Lock Ring B 369248 Knob C 357107 Fuse Holder D 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p E 369603 Motor, Gear B ox Ass y. F 369066 Sprock et, 10 Tooth G 369260 On/Off H 350224 Lens, Yello w J 3695 72 Burner Light K[...]

  • Page 95

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 95 BLOW-UP / 103 3, 1034, 1046, 1047[...]

  • Page 96

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 96 PARTS / 1228 -1229 LETTER P/N DES CRIPTION A 369247 Shaft Lock Ring B 357107 Fuse Holder C 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p 369335 Fuse MDL Time Dela y, 1 Am p D 369248 Knob E 369252 Paddle Switc h F 369260 Switch, ON/O FF H 350224 Lens, Yello w I 369128 Neon Pilo t Light, 12[...]

  • Page 97

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 97 BLOW UP / 1228, 1229[...]

  • Page 98

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 98 PARTS / 1242 , 1243 LETTER P/N DES CRIPTION A 369247 Shaft Lock Ring B 357107 Fuse Holder C 369013 Fuse, 3 Am p 369014 Fuse, 10 Am p D 369248 Knob E 369252 Paddle Switc h F 369260 Switch, On/O ff G 350224 Lens, Yellow H 369131 Therm ocouple I 369507 Therm ostat, Cooling F an J 3690 2[...]

  • Page 99

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 99 BLOW - UP / 1242, 1243[...]

  • Page 100

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 100 PARTS / OVEN B ACK – GAS LETTER P/N DESCRIPT ION A 369048 Motor and F an Cover B 369212 Motor, S/N beg ins with a"Q" 369214 Motor, 50 H z, 240V C 369192 Capacitor 7. 5 MFD, 37 0 VAC D 369045 Oven Back - S/N 4612 & Below 369306 Oven Back Ass y. - S/N 4613 & Above [...]

  • Page 101

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 101 BLOW UP / OVEN BACK – GAS[...]

  • Page 102

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 102 PARTS / OVEN B ACK- ELECTRIC LETTER P/N DES CRIPTION A 369699 Rear Cover Assy. B 369212 Motor, S/N beg ins with a "Q" 369214 Motor, 50 H z, 240V C 369192 Capacitor 7. 5 MFD, 37 0 VAC D 369307 Oven Back Ass y. - S/N 4768 & Above E 369122 240V Heati ng Elem ent 369287 20[...]

  • Page 103

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 103 BLOW UP / OVEN BACK – ELECTRIC[...]

  • Page 104

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 104 PARTS / CONVEYOR MOTO R ASSEMBLY S/N 4390 & ABOVE LETTER P/N DES CRIPTION A 369291 Motor, DC - C onve yor 369384 Motor Brus h Ass y. B 369294 #4 Lock washer C 369296 Screw, 4-4 0 x 1/4 D 369290 Optical Enco der Ass y. E 369151 Coupling and Encoder D isc (.050 in. Allen W r ench [...]

  • Page 105

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 105 BLOW UP / CONVEYOR MOTOR ASSEMBLY S/ N 4390 & ABOVE[...]

  • Page 106

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 106 PARTS / SERIES 1000 – CONVEYOR LETTER P/N DES CRIPTION A 369002 Tension Knob, Conve yor B 369314 Roll, Conve yor-Notche d C 369835 Conve yor Frame As sy. D 369312 Conve yor Shaft, Idler E 369160 Conve yor Pan Stop F 369641 Idle Bearin g Brack et G 369220 Idle Bear ing H 369005 Con[...]

  • Page 107

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 107 BLOW UP / SERIES 1000 CONVEYOR[...]

  • Page 108

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 108 PARTS / SERIES 1200 - CONVEYOR CONTRO L LETTER P/N DES CRIPTION A SEE PAG E 104 B 369012 Fuseholder C 369013 Fuse, 3 Am p D 369240 Hi Hat E 369155 Conve yor Motor Contro l, "A" S/N Q 4613 to Q14 973 369640 Conve yor Control (Ste pper) S/N Q1 4974 & Above 357028 Fuse, N[...]

  • Page 109

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 109 BLOW UP / SERIES 1200 – CONVE YOR CONTROL[...]

  • Page 110

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 110 PARTS / SERIES 1200 – CONVEYOR LETTER P/N DES CRIPTION A 369277 Retaining Bl ock , Inner B 369275 Flanged Be aring, .50 ID C 369276 Inner Driv e Shaft D 369274 Flanged Be aring, .75 ID E 369279 Retaining Bl ock , Outer F 369278 Outer Dri ve Shaft G 369241 Sprock et 3/4" Bor e[...]

  • Page 111

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 111 BLOW UP / SERIES 1200 – CONVE YOR[...]

  • Page 112

    Impinger I -–1 000 Ser ies Service Ma nual - In ternation al 112[...]