Konica Minolta BIZHUB PRO 1050 manual

Chapter 1 : Introduction Chapter 2 : Overview of the Scanning Features Chapter 3 : Before Using the Scanning Features Chapter 4 : About the Copied Data Processing Features Chapter 5 : About the Network Scanner F eatures Chapter 6 : Configuring Destination with the Network Scanner Features Chapter 7 : Using the Network Scanner Features Chapter 8 : A[...]

bizhub PRO 1050/1050e Scan ner i Table of contents 1 Introduction 1.1 Introduction ....... ........ ........... ......... ........ ........ ............ ........ ........ ........ 1-2 1.1.1 ACKNOWLEDGEMENTS: . ......... ........ ........ ............ ........ ........ ........ 1-2 1.1.2 EXEMPTION ..... ......... ........ ......... ........ ........[...]

ii bizhub PRO 1050/1050e Sc anner 4 About the Copied Data Processi ng Features 4.1 Overview of t he STORE/RECALL Features .......... ......... ........... .......4-2 4.1.1 About folders and boxes ....... ......... ... ........ ........... ......... ........ ........ .. 4-4 4.2 About Screens of the STORE/ RECALL Tabs .......... ........ ............[...]

bizhub PRO 1050/1050e Scan ner iii 6.2 Registeri ng an E-Mail Address ...... ......... ........ ......... ........... ........ ..... 6-4 6.3 Registering the HDD-B ... ............................ ................................. ..... 6-6 6.4 Registeri ng the FTP server ............... ........... ......... ........ ........... ........ 6-9 6.5 Re[...]

iv bizhub PRO 1050/1050e Sc anner 11 Utility Tool s 11.1 PageScope JobEd itor ........ ........ ...... ... ........ ........ ......... ........... ........11-2 11.1.1 How to use PageScope J obEditor ...... ............ ........ ........... ......... .. 11-3 11.2 PageScope JobEd itorServer ........... ... ........ ........ ............ ........ ....[...]

1 Introd uction Chapter 1 Introduction[...]

1 Introduction 1-2 bizhub PRO 1050/1050e Scann er Introd uction Chapter 1 1 Introduction 1.1 Intr oduct ion Thank you very much for purchasin g the bizhub PRO 1050/1050e. This User's Guide describes the op erating procedures and safety precau- tions of the bizhub PRO 1050/1050e so that you can handle it safely and make the best of i ts capabil[...]

Introduction 1 bizhub PRO 1050/1050e Scan ner 1-3 Introd uction Chapter 1 1.1.3 OpenSSL Statement OpenSSL License Copyright (c) 1998-200 0 The OpenSSL Project . All ri ghts reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: 1. Redistributions o[...]

1 Introduction 1-4 bizhub PRO 1050/1050e Scann er Introd uction Chapter 1 Original SSLeay License Copyright (C) 1995-199 8 Eric Young (eay@cryptsoft .com) All ri ghts reserved. This package is an SSL implementation written by Eric Young (eay@crypt- soft.com). The implementation was writte n so as to conform with Netscape’s SSL. This library is fr[...]

Introduction 1 bizhub PRO 1050/1050e Scan ner 1-5 Introd uction Chapter 1 GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAU SED AND ON ANY THEORY OF LIABILI- TY, WHETHER IN CONTRACT, STRICT L IABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHE RWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVIS[...]

1 Introduction 1-6 bizhub PRO 1050/1050e Scann er Introd uction Chapter 1 1.2 Composition of User's Guide This machine is provided with the follo wing user's guides as printed matte rs. User's Guide - Copier This guide describes an outline of the machine and copy oper ations. Please refer to this guid e for safety informa tion, tu rn[...]

Introduction 1 bizhub PRO 1050/1050e Scan ner 1-7 Introd uction Chapter 1 1.3 About this Manual This manual is the User's Guide for bizhu b PRO 1050/1050e Network Scan- ner features. This manual describes the following features operated on the Control Panel. - [SCAN] tab, [STORE] tab, [RECALL] tab 2 Reminder A screen display may chan ge with d[...]

1 Introduction 1-8 bizhub PRO 1050/1050e Scann er Introd uction Chapter 1 1.3.1 Manual Composition This manual is composed of the following 12 chapters: Chapter 1 Introduction This chapter describes this User's Guide. Chapter 2 Overview of the Scann ing Features This chapter overviews the Network Sca nner features and th e Copied Data Processi[...]

Introduction 1 bizhub PRO 1050/1050e Scan ner 1-9 Introd uction Chapter 1 1.3.2 Conventions Used in this Manual Notation of each product The following abbreviations are used in t his manual: 1 bizhub PRO 1050/1 050e Printer/ Copier: copier 2 bizhub PRO 1050/1 050e Print Con troller: print con troller 3 A printing system that combines the above (1) [...]

1 Introduction 1-10 bizhub PRO 1050/1050e Sc anner Introd uction Chapter 1 1.3.3 Utility Tools of This Product The utility tools used in the Network Scanner fe atures are as follows. For more information on how to operate the utilit y tools, refer to the User's Guide for the each or the correspon ding pages of this manual. KONICA MINOLTA Scann[...]

Introduction 1 bizhub PRO 1050/1050e Scan ner 1-11 Introd uction Chapter 1 1.3.4 How to read this Manual 6 Configuring Destination for the Network Scanner Features 6.2 Registering an E-Mail Address When using the function to send the scanned data as an E-Mail attached file, you can register the destination E-Mail address in advance. The registratio[...]

[...]

2 Overview of the Scanning Fea tures Chapter 2 Overview of the Scanning Features[...]

2 Overview of the Scannin g Features 2-2 bizhub PRO 1050/1050e Scann er Overview of the Scanning Features Chapter 2 2 Overview of the Scanning Features 2.1 Overview of Features and Connection Modes The copier has the Network Scanner feat ures and the Copied Data Process- ing Features. 2.1.1 About the HDD The copier has two types of internal HD Ds; [...]

Overview of the Scanning Feature s 2 bizhub PRO 1050/1050e Scan ner 2-3 Overview of the Scanning Fea tures Chapter 2 2.1.2 Copied Data Processing Features The Copied Data Proc essing fe atures ena ble you to import an d process cop- ied documents that are con verted to digi tal data (copied da ta) and stored on the internal HDD (HDD- A) of the copi[...]

2 Overview of the Scannin g Features 2-4 bizhub PRO 1050/1050e Scann er Overview of the Scanning Fea tures Chapter 2 ! Detail For more information on the Copied Da ta Processing Features, refe r to "About the Copied Data Proce ssing Features" on Page 4-2. For more information on PageScope JobEditor, refer to "PageScope JobEditor"[...]

Overview of the Scanning Feature s 2 bizhub PRO 1050/1050e Scan ner 2-5 Overview of the Scanning Fea tures Chapter 2 2.1.3 Network Scanner Features The Network Scanner featu res enable the followings by converti ng a scanned document to digital data. The Network Scanner featu res are op erated by using the [SCAN] tab. ! Detail To use the copier as [...]

2 Overview of the Scannin g Features 2-6 bizhub PRO 1050/1050e Scann er Overview of the Scanning Fea tures Chapter 2 2.2 Product Specifications For information on the prod uct specifications of the copier , the print control- ler and the network, ref er to the User's Guide for the each or contact your administrator for the each. Product Specif[...]

3 Before Using the Scanning Features Chapter 3 Before Using the Scanning Features[...]

3 Before Using the Scannin g Features 3-2 bizhub PRO 1050/1050e Scann er Before Using the Scanning Features Chapter 3 3 Before Using the Scanning Features 3.1 About the Con trol Panel For detailed information on names and functions of variou s parts of the Con- trol Panel, refer to the User's Guide (Copy). No. Description 1 Power Switch turns [...]

Before Using the Scanning Fea tures 3 bizhub PRO 1050/1050e Scan ner 3-3 Before Using the Scanning Features Chapter 3 8 Start LED lights in g reen whe n machine operation is available, an d turns r ed if any operation ca nnot be starte d. 9 [C] (Clear quantity) allows resetting of print quantity. 10 Access sets the machine to allow copying/ scannin[...]

3 Before Using the Scannin g Features 3-4 bizhub PRO 1050/1050e Scann er Before Using the Scanning Features Chapter 3 3.2 How to operat e the Touch Panel To operate the Copied Da ta Processing Feature s/Network Scanne r features, use the Touch Panel of th e copier. ! Detail You can select an item by touc hing keys ligh tly on the Touch Panel. Selec[...]

Before Using the Scanning Fea tures 3 bizhub PRO 1050/1050e Scan ner 3-5 Before Using the Scanning Features Chapter 3 ! Detail You may also input values through the Keypad on the Control Panel. For more information on how to input ch aracters, refer to "How to Input Characters" on Page 3-6. To switch between pages When all items can not b[...]

3 Before Using the Scannin g Features 3-6 bizhub PRO 1050/1050e Scann er Before Using the Scanning Features Chapter 3 3.3 How to Input Characters As you touch the item where you can input characters , the cha racter inpu t screen appears. You can input alphabe ts and signs. Charac ter array is the sa me with compu- ter keyboards. 3.3.1 About keys o[...]

Before Using the Scanning Fea tures 3 bizhub PRO 1050/1050e Scan ner 3-7 Before Using the Scanning Features Chapter 3 3.4 How to Search The Copied Data Processing Featu res/Network Sca nner featu res enables you to search the register ed destination a nd specified storage location by their names. You can also sea rch the stored Box No.. 3.4.1 Desti[...]

3 Before Using the Scannin g Features 3-8 bizhub PRO 1050/1050e Scann er Before Using the Scanning Features Chapter 3 3.4.2 Searching a box/file In the Copied Da ta Processi ng Features, you c an search quickly t he desired box out of the boxes created on the HD D-A by its Box No.. Also, if you know the Folder Name, Bo x Name and File Name, you can[...]

Before Using the Scanning Fea tures 3 bizhub PRO 1050/1050e Scan ner 3-9 Before Using the Scanning Features Chapter 3 ! Detail Pressing the [Cancel ] key cancels the input B ox No., and the No. Search screen clos es. If a password is configured for the box, you need to enter the password. Direct Call If you know all the registered Folder Name, Box [...]

3 Before Using the Scannin g Features 3-10 bizhub PRO 1050/1050e Sc anner Before Using the Scanning Features Chapter 3 4 Input the File Name and press the [OK] ke y. – When a correspondin g file does not exist, the message "Failed direct call" appears. Confirm that the Folder Name, Box Name and File Name are correct, and return to the s[...]

Before Using the Scanning Fea tures 3 bizhub PRO 1050/1050e Scan ner 3-11 Before Using the Scanning Features Chapter 3 3.5 Thumbnail When transmittin g or outputting the da ta stored in the HD D-A, conten ts of the data ca n be confi rmed in a dvance by displaying the thumbna il. ! Detail For more information of HDD-A to be used, refer to “About [...]

[...]

4 About the Co pied Dat a Processing Feat ures Chapter 4 About the Copied Data Processing Features[...]

4 About the Copied D ata Processing Featu res 4-2 bizhub PRO 1050/1050e Scann er About the Co pied Dat a Processing Feat ures Chapter 4 4 About the Copied Data Processing Fea- tures 4.1 Overview of the ST ORE/RECALL Features Copied data stored in the HDD(HDD-A) in the copier main body can be un- loaded into the computer using the atta ched utility [...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-3 About the Co pied Dat a Processing Feat ures Chapter 4 ! Detail PageScope JobEditor and PageScope JobEditorServer for USA are ex- cluded. About how to obtain PageScope Jo bEditor and PageScope JobEditorS- erver, contact your service represe ntative. When Security St ren[...]

4 About the Copied D ata Processing Featu res 4-4 bizhub PRO 1050/1050e Scann er About the Co pied Dat a Processing Feat ures Chapter 4 4.1.1 About folders and boxes Copied data are managed by boxes cre ated in folders on the HD D-A. About Fo lders Use the [STORE] tab to store the data r ead in from the copier's ADF or the original scanning gl[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-5 About the Co pied Dat a Processing Feat ures Chapter 4 Types of a folder, bo x and file ! Detail For more information on the Secure Folder, refer to Chapter "9 About the Secure Folder". Types of a folder, box and file Number Create/Delete Naming Personal Folde[...]

4 About the Copied D ata Processing Featu res 4-6 bizhub PRO 1050/1050e Scann er About the Co pied Dat a Processing Feat ures Chapter 4 4.2 About Screens of th e STORE/RECALL Tabs Screens of the STORE/RECALL tabs incl ude such screens on which to spec- ify a storage location as the folder lis t screen (Personal Folder), the box list screen (Persona[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-7 About the Co pied Dat a Processing Feat ures Chapter 4 4.3 Registering a Personal Folder A Personal Folder is registered (created) for each use r, where you manage data you want to STORE/RECALL. Regist er a Personal Folder in the follow- ing steps. ! Detail At maximum, [...]

4 About the Copied D ata Processing Featu res 4-8 bizhub PRO 1050/1050e Scann er About the Co pied Dat a Processing Feat ures Chapter 4 4 Press the [New Register] key. 5 Press the [Folder Name Input] key to display the characte r input screen. Input an y Folder Name. – Input a Folde r Name within 6 4 characters in alphameri c char- acters and sig[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-9 About the Co pied Dat a Processing Feat ures Chapter 4 7 Press the [OK] key. The box list screen ap pears. 8 If you register only a folder, press the [Cancel] key to go to the step 9. If you register a box also, go to the step 4 "Cre ating a Box (Per- sonal Folder/[...]

4 About the Copied D ata Processing Featu res 4-10 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4.4 Deleting a Pe rsonal Folder To delete a registered Personal Folder, follow the steps below. 1 Select the [REC ALL] tab. 2 Press the [Personal Folder] key. 3 Select the folder you want to de- lete.[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-11 About the Co pied Dat a Processing Feat ures Chapter 4 4 Press the [Folder Delete] key. – If a Password is not configured for the Folder, a screen ap- pears and confirms you whether to delete the folder. Go to the step 6. If a Password is configured for the Folder, t[...]

4 About the Copied D ata Processing Featu res 4-12 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4.5 Creating a Bo x (Personal Folder/Public Folder) The copied data a re managed in boxes created i n the folders of the HDD-A (Personal Folder/Public Fol der). Crea te a box by the following steps. ! Detail At ma[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-13 About the Co pied Dat a Processing Feat ures Chapter 4 – For more information on the types of folder, refer to "Overview of the STORE/RECALL Features" on Page 4-2. – When you select a Public Fol d- er Press the [Public Folder] key. 4 Press the [New Box] k[...]

4 About the Copied D ata Processing Featu res 4-14 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 If you do not register a Box Na me, the Box No. becomes the Box Name. 6 If you configure a Password for a box, press the [Password Input] key to display the character input screen. Enter any Password. – Input a [...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-15 About the Co pied Dat a Processing Feat ures Chapter 4 9 If you register only a box, press the [Return] an d go to the step 10 . If you go on to store d ata on the HDD-A, go to the step 5 of “Scan- ner to HDD” on Page 4-22. 10 Make sure that the B ox Name you re gi[...]

4 About the Copied D ata Processing Featu res 4-16 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4.6 Deleting a Box (Personal Folder/Public Folder/Se cure Folder) Delete a box in the following steps. 1 Select the [REC ALL] tab. 2 Select a folder. – When you select a Personal Folder Press the [Personal Folde[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-17 About the Co pied Dat a Processing Feat ures Chapter 4 – When you sel ect a Se cure Folder Press the [Secure Folder] key. 3 Select the b ox you want to dele te. – When you sel ect a Personal Folder – When you select a Public Fol d- er – When you sel ect a Se cu[...]

4 About the Copied D ata Processing Featu res 4-18 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 – When you select a Personal Folder – When you select a Public Fol d- er – When you select a Secure Folder If a Password is configure d for the box, the Password input screen appears. If a Password is not co[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-19 About the Co pied Dat a Processing Feat ures Chapter 4 6 Press the [Yes] key. The box is deleted, and the box list screen appears. 7 Confirm that the box is deleted. – When you sel ect a Personal Folder – When you select a Public Fol d- er – When you sel ect a Se[...]

4 About the Copied D ata Processing Featu res 4-20 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4.7 Selectin g a Storage Lo cation If you want not to print but to store copied data, select a storage location by using the [STORE] tab. Copied data can be stored in either of the following thre e types of storag[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-21 About the Co pied Dat a Processing Feat ures Chapter 4 2 Press the [Scanner to HDD] key. 3 Select a folder in which you store data. – When you sel ect a Personal Folder – Press the [Personal Folder] key to display the list. Select the folder and press the [OK] k ey[...]

4 About the Copied D ata Processing Featu res 4-22 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 – In case of Public Folder – Press the [No. Search ] key and enter a Box No. to select a box by Box No.. For more informa- tion, refer to "No. Search" on Page 3-8. – For information on how to cre- [...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-23 About the Co pied Dat a Processing Feat ures Chapter 4 8 Set an original and press the [Start] button. The original is scanned, and the copied data are stored in a specified box. The continuous storag e confirmation screen appea rs. 9 To continue storing data, press th[...]

4 About the Copied D ata Processing Featu res 4-24 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 Scanner to PC You can transmit copied data from the copi er to a computer to store them by using PageScope JobEditor/PageS cope JobEditorServer. PageScope JobEditor or PageScope JobEditorServe r needs to be instal[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-25 About the Co pied Dat a Processing Feat ures Chapter 4 Store copied data in a comp uter in the following steps. 1 Select the [STORE] tab. 2 Press the [Scanner to PC] key. The setting screen appears. 3 Configure the ne cessary items. – For more info rmation on the con[...]

4 About the Copied D ata Processing Featu res 4-26 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 5 Connect to the copier through Page Scope JobEditor installed on the computer, and store the copied da ta. PageScope JobEditorServer re- ceives data automatically. – For more information on how to operate PageS[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-27 About the Co pied Dat a Processing Feat ures Chapter 4 HDD to PC You can tr ansmit copied data stored on the HDD -A to a compute r to store them by using PageScope JobEditor/P ageScope JobEditorServer or FTP/ SMB. Set up the data transmitting method to PC beforehand. ![...]

4 About the Copied D ata Processing Featu res 4-28 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 3 Select a Folder. – When you select a Personal Folder – Press the [Personal Folder] key to display the list. Select any folder and press the [OK] k ey. – If a Password is conf igured for the Personal Folder[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-29 About the Co pied Dat a Processing Feat ures Chapter 4 – In case of Public Folder – If a Password is conf igured for the box, the Password input screen appear s. Enter the Password. – Press the [No. Search] key and enter a Box No. to search a box by Box No.. For [...]

4 About the Copied D ata Processing Featu res 4-30 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 7 Confirm the File Name, FTP Ad- dress, SMB Add ress and select File Form and press [OK] key. – If a file name longer than 21 characters has been set for the file, ch aracters on the 21st and on are automaticall[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-31 About the Co pied Dat a Processing Feat ures Chapter 4 4.8 About the Copied Data Storage Setting Screen On the Copied Data Storage Set ting screen, such settings as original set- tings and quality settin gs can be configured. ! Detail Those settings that can be configu[...]

4 About the Copied D ata Processing Featu res 4-32 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 Special Image Pressing the [S pecial Image ] key ena- bles you to configure the following set- tings. Special Image Lighter, Normal, Darker AES (AE) Zoom Pressing the [Zoom] key enables you to configure the follow[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-33 About the Co pied Dat a Processing Feat ures Chapter 4 Application Annotation Pressing the [A nnotation] key en ables you to confi gure the fo llowing settings. Frame/Folder Eraser Pressing the [Frame/Folder Eraser] key enables you to configure the following settings. [...]

4 About the Copied D ata Processing Featu res 4-34 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4.9 Changing Data Transmission Method to PC There are 3 methods to transmit copi ed data to the computer: [Transmit to PC], [Operate on PC] and [FTP/SMB]. ! Detail Network settings are ne eded to transmit copied d[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-35 About the Co pied Dat a Processing Feat ures Chapter 4 ! Detail An administrator needs t o specify the IP Address of the target compu ter on the copier. For more infor mat ion, contact your administrator. For more information on PageScope JobEditorServer, refer to &quo[...]

4 About the Copied D ata Processing Featu res 4-36 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 3 Press the [Transmit to PC] key. – If you have not specified a tar- get computer on the copier, you cannot select the [Tra ns- mit To PC] key. For more infor- mation, contact your administrator. 4 Press the [OK[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-37 About the Co pied Dat a Processing Feat ures Chapter 4 Operate on PC If you configure the recei ving operation on a PC, the computer with Page- Scope JobEditor can receive copi ed data. ! Detail For more information on PageScope JobEditor, refer to "PageScope JobE[...]

4 About the Copied D ata Processing Featu res 4-38 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 3 Press the [Operate on PC] key. 4 Press the [OK] key to close the screen.[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-39 About the Co pied Dat a Processing Feat ures Chapter 4 FTP/S MB By setting the FTP/SMB in advance, copied data stored in the HDD-A can be converted to PDS/TIFF data and transmi tted to the FTP server or SMB serv- er. ! Detail For more information of HDD-A to be used, r[...]

4 About the Copied D ata Processing Featu res 4-40 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 4 Press the [OK] key to close the screen.[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-41 About the Co pied Dat a Processing Feat ures Chapter 4 4.10 Output from the HDD-A Co p i ed d a t a s t o re d o n th e H DD - A w it h the [STORE] tab or secure print jobs transmitted from a computer can be output using the [RECALL] tab. ! Detail For more information [...]

4 About the Copied D ata Processing Featu res 4-42 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 – When you sel ect Secure Fold- er – Press the [Secure Folder] key. – For more info rmation on the types of folder, refer to "Over- view of the STORE/RECALL Features" on Page 4-2. – A Password ma[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-43 About the Co pied Dat a Processing Feat ures Chapter 4 formation, refer to "No. Search" on Page 3-8. – If you know the target file, press th e [Direct Call] key t o specify the location directly. For more inform ation, refer to "Direct Call" on Pa[...]

4 About the Copied D ata Processing Featu res 4-44 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 7 To continue recalling data, press the [Yes] key. To finish recalling data, press the [No] key . – Pressing the [Yes] key displays the file list screen. Return to the step 4 and repeat the pro- cedures.[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-45 About the Co pied Dat a Processing Feat ures Chapter 4 4.11 About the Recall Ta b’s Output Setting Screen On the Recall Tab’ s Output Setting scree n, you can configure t he settings for outputting stored copied data or secure output print jobs. ! Detail On how to [...]

4 About the Copied D ata Processing Featu res 4-46 bizhub PRO 1050/1050e Sc anner About the Co pied Dat a Processing Feat ures Chapter 4 Auto Output If this key is pressed, the outpu t starts without pressing the start bu tton. Button Function[...]

About the Copied Data Proce ssing Features 4 bizhub PRO 1050/1050e Scan ner 4-47 About the Co pied Dat a Processing Feat ures Chapter 4 The flow of operation of the Wait Output and Proof Output Change settings Change settings Output the one sheet for a confirmation Exit the operation as it is. Output it by the present settings If it is in the state[...]

[...]

5 About the Net work Scann er Features Chapter 5 About the Network Scanner Features[...]

5 About the Network Scanner Features 5-2 bizhub PRO 1050/1050e Scann er About the Net work Scann er Features Chapter 5 5 About the Network Scanner Features 5.1 Overview of the Ne twork Scanner Features The Network Scanner featu res to use the internal HD D (HDD-B) of the print controller a re operated on the SCAN ta b screen. Data scanned by the Ne[...]

About the Network Scanner Feat ures 5 bizhub PRO 1050/1050e Scan ner 5-3 About the Net work Scann er Features Chapter 5 ! Detail "About the Scanner Setting Basic Screen" .. p.7-26 To use the copier as a ne twork scanner, it needs to be connecte d to the network. For more information on th e network c onfiguration, con tact your network ad[...]

5 About the Network Scanner Features 5-4 bizhub PRO 1050/1050e Scann er About the Net work Scann er Features Chapter 5 5.2 Send by an E-Ma il You can send the da ta read in from the c opier's ADF or the origina l scanning glass (scann ed data) to a n E-Mail address as an attach ed file. For detailed informat ion on how to op erate the function[...]

About the Network Scanner Feat ures 5 bizhub PRO 1050/1050e Scan ner 5-5 About the Net work Scann er Features Chapter 5 ! Detail When the E-M ail is in exce ss of the maximum transmission size that has been set, it is not sent to the SMTP server, but cancelled on the bizhub PRO 1050/1050e. Transmission from the copier is up to the STMP server. If t[...]

5 About the Network Scanner Features 5-6 bizhub PRO 1050/1050e Scann er About the Net work Scann er Features Chapter 5 5.3 Store on the HDD-B In order to store the data read in from the copier's ADF or the original scan- ning glass (scanned data) on the HDD -B, you need to configure boxes on the HDD-B in advance. The scanned data are stored in[...]

About the Network Scanner Feat ures 5 bizhub PRO 1050/1050e Scan ner 5-7 About the Net work Scann er Features Chapter 5 5.4 Send to the F TP server You can send the da ta read in from the c opier's ADF or the original scanning glass (scanned data) to the FTP server. The scanned data sent to the FTP se rver can be downloaded from comput- ers th[...]

5 About the Network Scanner Features 5-8 bizhub PRO 1050/1050e Scann er About the Net work Scann er Features Chapter 5 You can register a Host Address, File Path, Login Name and Password in ad- vance. For information on how to regist er them, refer to "Registering the FTP server" on Page 6-9. 2 Reminder Depending on a network condition, t[...]

About the Network Scanner Feat ures 5 bizhub PRO 1050/1050e Scan ner 5-9 About the Net work Scann er Features Chapter 5 5.5 Send to the SMB server You can send the da ta read in from the c opier's ADF or the original scanning glass (scanned data) to the SMB server. The scanned data se nt to the SMB serv er can be f ile-sha red with comput ers [...]

5 About the Network Scanner Features 5-10 bizhub PRO 1050/1050e Sc anner About the Net work Scann er Features Chapter 5 2 Reminder Depending on a network co ndition, transmission to the SMB serv er may damage the scanned data. Make sure that the sca nned data are not damaged.[...]

About the Network Scanner Feat ures 5 bizhub PRO 1050/1050e Scan ner 5-11 About the Net work Scann er Features Chapter 5 5.6 Send to a Group If you register multiple destinations/storage locati on s as a Group, you can send/store the data read in from the copier's ADF or the original scanning glass (scanned data) to them at one time. - At maxi[...]

5 About the Network Scanner Features 5-12 bizhub PRO 1050/1050e Sc anner About the Net work Scann er Features Chapter 5 5.7 Use the Networ k Scanner Features To scan data using the Network Scanne r features , follow the flow below . Specifying destination Configuring the scanner P erform scanning Registering destination Did you register the destina[...]

6 Configuring Destination for the Network Scanner Featu res Chapter 6 Configuring Destination for the Network Scanner Features[...]

6 Configuring Destination for the Network Scanner Features 6-2 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Featu res Chapter 6 6 Configuring Destination for the Network Scanner Features 6.1 About Re gistrati on When you transmi t scanned data to de stinations/storage locations, you can input a destination every ti[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-3 Configuring Destination for the Network Scanner Featu res Chapter 6 6.1.2 The keys on the Destination Manual Input screen You can register a destination in the Destination Manua l Input screen. On how to display the Destination Manual Input screen, refer[...]

6 Configuring Destination for the Network Scanner Features 6-4 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Featu res Chapter 6 6.2 Registering an E-Mail Address When using the f unction to send the sc anned data as an E-Mail attached file, you can register the destination E-Ma il address in advance. The registrati[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-5 Configuring Destination for the Network Scanner Featu res Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen . – For more information on how to input characters, refer to &q[...]

6 Configuring Destination for the Network Scanner Features 6-6 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Featu res Chapter 6 6.3 Registering the HDD-B If you want to store the scanned data on the HDD-B, you need to r egister boxes on the HDD-B.The registration is done in the following steps. ! Detail For more in[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-7 Configuring Destination for the Network Scanner Featu res Chapter 6 your administrator of the copier. The Manual Address sc reen a ppear s. 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input s[...]

6 Configuring Destination for the Network Scanner Features 6-8 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Featu res Chapter 6 5 Press the [Register] key. Pressing this key brings you back to the Select Destinations/Storage Locations screen (HDD). 6 Make sure that th e registered Name is displayed. ! Detail If the[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-9 Configuring Destination for the Network Scanner Featu res Chapter 6 6.4 Registering the FTP server If you want to send the scanned data to th e FTP server, you can register th e destination FTP server. The registrati o n is done in the foll owing steps. [...]

6 Configuring Destination for the Network Scanner Features 6-10 bizhub PRO 1050/1050e Sc anner Configuring Destination for the Network Scanner Featu res Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input scre en. – For more information on how to input characters, refer to &qu[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-11 Configuring Destination for the Network Scanner Featu res Chapter 6 6 Make sure that the registered Name is displayed. ! Detail If the desired Name is not di splayed o n the pag e, pre ss [ ▼ ] / [ ▲ ] to switch between pages. An administrator is t [...]

6 Configuring Destination for the Network Scanner Features 6-12 bizhub PRO 1050/1050e Sc anner Configuring Destination for the Network Scanner Featu res Chapter 6 6.5 Registering the SMB server If you want to send the scanned data to the SMB server, you can register the destination SMB server. The registration is done in the following steps. ! Deta[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-13 Configuring Destination for the Network Scanner Featu res Chapter 6 The Manual Address sc reen a ppear s. 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen . – For more information [...]

6 Configuring Destination for the Network Scanner Features 6-14 bizhub PRO 1050/1050e Sc anner Configuring Destination for the Network Scanner Featu res Chapter 6 6 Make sure that th e registered Name is displayed. ! Detail If the desired Name is not di splayed on the page, press [ ▼ ] / [ ▲ ] to switch between pages. An administrator is to edi[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-15 Configuring Destination for the Network Scanner Featu res Chapter 6 6.6 Registering a Group If you want to send the scanned data to multiple destinations/storage loca- tions, you can register them as a Group. The registration is done in the fol- lowing [...]

6 Configuring Destination for the Network Scanner Features 6-16 bizhub PRO 1050/1050e Sc anner Configuring Destination for the Network Scanner Featu res Chapter 6 4 Press the [Group Nam e] key, and input a Group name on the char- acter input screen. – For more information on how to input characters, refer to "How to Input Characters" on[...]

Configuring Destinati on for the Network Scanner Feature s 6 bizhub PRO 1050/1050e Scan ner 6-17 Configuring Destination for the Network Scanner Featu res Chapter 6 9 Make sure that the registered Name is displayed. ! Detail If a large number of registrations ha ve been made and the desired Name is not displayed on the page, press [ ▼ ] / [ ▲ ][...]

[...]

7 Using the Netwo rk Scanner Feat ures Chapter 7 Using the Network Scanner Features[...]

7 Using the Network Scanner Features 7-2 bizhub PRO 1050/1050e Scann er Using the Netwo rk Scanner Feat ures Chapter 7 7 Using the Network Scanner Features 7.1 The keys on the Select Destinations/Storage Loca- tions Screen In order to run scanni ng, you need to specify a destination/storage location to which you send the scanned data. Th e followin[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-3 Using the Netwo rk Scanner Feat ures Chapter 7 Button Function [A-C] - [W-Z ] key (Index key ) When this k ey is pr essed, the first alphabet ch aracter of th e reg- istered name corresponding to the key is displayed. [No. etc]* Names with initial letter in n umbers or signs a[...]

7 Using the Network Scanner Features 7-4 bizhub PRO 1050/1050e Scann er Using the Netwo rk Scanner Feat ures Chapter 7 7.2 Transmission to an E-Mail Address When you send the sc anned data as an at tached file of a n E-Mail, ne cessary procedures depend on whether the a ddresses are registered in advance or they are in put manual ly. ! Detail Refer[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-5 Using the Netwo rk Scanner Feat ures Chapter 7 3 If you want to put a Title on an E- Mail, press the [Title] key. – Not putting any Title wil l not cause any problem. An E-Mai l without a Ti tle will be sent with the scanned data being at- tached. 4 Press [1] - [5] or the [M[...]

7 Using the Network Scanner Features 7-6 bizhub PRO 1050/1050e Scann er Using the Netwo rk Scanner Feat ures Chapter 7 6 Press [1] - [5] or the [Manual Input] key to det ermine the Sen tence and press the [OK] key. – Pressing the [Manual Input] key displays the character in- put screen. – For more information on how to input characters, refer t[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-7 Using the Netwo rk Scanner Feat ures Chapter 7 9 Configure the ne cessary items. – For more info rmation on the configurations on th e Scanner Setting Basic screen, refer to "About th e Scanne r Settin g Basic Screen " on Page 7-26. 10 Set an original and press the[...]

7 Using the Network Scanner Features 7-8 bizhub PRO 1050/1050e Scann er Using the Netwo rk Scanner Feat ures Chapter 7 When an E-Mail Add ress is Input M anually 1 Follow the Step 1 to 6 of "When an E-Mail Address is Already Regis- tered" on Page 7-4. 2 Press the [Manual Address] key. – If you select a destination from the regi stry, re[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-9 Using the Netwo rk Scanner Feat ures Chapter 7 7.3 Storage on the HDD-B When you store the scanned data on the HDD-B, necessary procedures de- pend on wheth er or not the boxes are registe red in adv ance. ! Detail Refer to the following pages. "When a Box is Already Regi[...]

7 Using the Network Scanner Features 7-10 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 3 Press the Name of the Box No.. – You can refine the registered destination by the searc h func- tion. For more information on how to search, refer to "How to Search" on Page 3-7. – You can refine the Name by the se[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-11 Using the Netwo rk Scanner Feat ures Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen. Return to step 5 and repeat the proce- dures.[...]

7 Using the Network Scanner Features 7-12 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 When a Box is Not Registered 1 Follow the Step 1 to 2 of "When a Box is Already Registered" on Page 7-9. 2 Press the [Manual Address] key. – If you want to select the regis- tered box, refer to "When a Box is Alre[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-13 Using the Netwo rk Scanner Feat ures Chapter 7 5 Press the [Scanne r Setting] key. The Scanner Setting Basic screen appears. 6 Follow the Step 5 and after of "Whe n a Box is Al ready Registered " on Page 7-9.[...]

7 Using the Network Scanner Features 7-14 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 7.4 Transmissi on to the FT P server When you send the scanned data to an FTP server, ne cessary procedures depend on whether the FTP se rver is registered in ad vance or it is input man- ually. ! Detail Refer to the following pag[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-15 Using the Netwo rk Scanner Feat ures Chapter 7 3 If you need t o change t he Port No., press the [Port No.] key. If unnec- essary, go to the step 5. 4 Input a Port No. and press the [OK] ke y. – The initial setting is 21. A Port No. for an FTP server is conf ig- ured in 5-d[...]

7 Using the Network Scanner Features 7-16 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 – To deselect the Name, press the sele cted Name again. – If you input a destination manu ally, refer to "When an FTP server is Input Manually" on Page 7-17. 7 Press the [Scanne r Setting] key. The Scanner S etting B[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-17 Using the Netwo rk Scanner Feat ures Chapter 7 When an FTP server is Input Manually 1 Follow the Step 1 to 5 of "When an FTP server is Already Registered" on Page 7-14. 2 Press the [Manual Address] key. – If you select a des tination from the registry, refer to &q[...]

7 Using the Network Scanner Features 7-18 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 5 Press the [Login Name] key to in- put a Login Na me. – Pressing the [Login Name] key displays the character inpu t screen. – For more information on how to input characters, refer to "How to Input Characters" on Pa[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-19 Using the Netwo rk Scanner Feat ures Chapter 7 7.5 Tran smission t o the SMB server When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB server is registe red in advance or it is input manually. ! Detail Refer to the following pages.[...]

7 Using the Network Scanner Features 7-20 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 3 Press the Name of the destination SMB server. – You can refine the registered destination by the searc h func- tion. For more information on how to search, refer to "How to Search" on Page 3-7. – You can refine the[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-21 Using the Netwo rk Scanner Feat ures Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen. Return to step 5 and repeat the proce- dures.[...]

7 Using the Network Scanner Features 7-22 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 When an SMB server is Input Manually 1 Follow the Step 1 to 2 of "When an SM B server is Already R egistered" on Page 7-19. 2 Press the [Manual Address] key. – If you select a destination from the regi stry, refer to &[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-23 Using the Netwo rk Scanner Feat ures Chapter 7 5 Press the [Login Name] key to in- put a Login Na me. – Pressing the [Login Name] key displays the character input screen. – For more information on how to input characters, refer to "How to Input Characters" on Pa[...]

7 Using the Network Scanner Features 7-24 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 7.6 Transmission to a Group To send the scanned data to a registered Group, follow the steps below. ! Detail For more information on how to register a Group , refer to "Register ing a Group" on Page 6-15. 1 Select the [S[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-25 Using the Netwo rk Scanner Feat ures Chapter 7 4 Press the [Scanner Screen] key. The Scanner Setting Basic screen appears. 5 Configure the ne cessary items. – For more info rmation on the configurations on th e Scanner Setting Basic screen, refer to "About th e Scanne [...]

7 Using the Network Scanner Features 7-26 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 7.7 About the Scanner Setting Basic Screen Pressing the [Scanner Sc reen] key on the Sel ect Dest inations/Storage Loca- tions screen displays the Scanner Sett ing Basic screen. On the Scanner Set- ting Basic screen, such settings[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-27 Using the Netwo rk Scanner Feat ures Chapter 7 Original S etting Pressing the [Original Setting] key ena- bles you to c onfigure the following set- tings. Original Setting Memory Scan Special Image Pressing the [S pecial Image] k ey ena- bles you to c onfigure the following s[...]

7 Using the Network Scanner Features 7-28 bizhub PRO 1050/1050e Sc anner Using the Netwo rk Scanner Feat ures Chapter 7 ×1.0 Application Pressing the [Application] key enab les you to configure the following sett ings. File Edit Image Edit All Off Book Copy Pressing the [Book Copy] key enables you to con- figure t he following settings. Left Bindi[...]

Using the Network Scan ner Features 7 bizhub PRO 1050/1050e Scan ner 7-29 Using the Netwo rk Scanner Feat ures Chapter 7 Scan Size Size Setting Pressing the [Size Setting] key enables you to confi gure the fo llowing settings. Auto Quality 600dpi, 400dpi, 300dpi, 200dpi Copy Mode Duplex, Simplex File Form Package TIFF Package PDF Division TIFF Divi[...]

[...]

8 About the Net work Scanner Driver Chapter 8 About the Network Scanner Driver[...]

8 About the Network Scanner Driver 8-2 bizhub PRO 1050/1050e Scann er About the Net work Scanner Driver Chapter 8 8 About the Network Scanner Driver 8.1 Reading in from HDD-B To read scanned data sitting on the HDD-B to a computer, you ne ed either of the following. These are also used to delete scanned data from the HDD- B. - KONICA MINOLTA Scanne[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scan ner 8-3 About the Net work Scanner Driver Chapter 8 8.1.1 Network Scanner Driver When the KONICA MINOLTA Scann er Driv er is install ed, you can download scanned data from the HDD-B of the print controller to a computer using TWAIN-compliant applications. The scanner driver can be used o[...]

8 About the Network Scanner Driver 8-4 bizhub PRO 1050/1050e Scann er About the Net work Scanner Driver Chapter 8 8.2 To install the Ne twork Scanner Driver To install the scanner driver, pe rform the following procedure. 1 Turn on the computer and start Windows. – Exit from all active Window s applications, if required. 2 Set the CD-ROM (bizhub [...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scan ner 8-5 About the Net work Scanner Driver Chapter 8 8.3 Import Scanned Data to Computers 8.3.1 TWAIN-compliant applications can be used to read in scanned data Select a TWAIN driver (the KONICA MI NOLTA Scanner Drive r) from your ap- plication, select a scanner (copier ha ving scanned or[...]

8 About the Network Scanner Driver 8-6 bizhub PRO 1050/1050e Scann er About the Net work Scanner Driver Chapter 8 4 In the [Sca nner Box No. S et-up] win- dow, input a [Scanner Server name (IP address)] to which you connect, a [Scanner Name] for identification by the driver, a [Box No.] s pecified when an original was scanned, a [Password] configur[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scan ner 8-7 About the Net work Scanner Driver Chapter 8 7 You can open the read-in docume nt within the applica tion for editing/ saving. Deleting images stored on the HDD-B Perform the following step s to delete a scanned da ta file from the HDD-B. 1 Run the TWAIN-compliant application (Ado[...]

8 About the Network Scanner Driver 8-8 bizhub PRO 1050/1050e Scann er About the Net work Scanner Driver Chapter 8 8.4 Features and Sett ings of the Netw ork Scanner Driver [KONICA MINOLTA Scanner Driver] window Information displayed on the [KON ICA MINOLTA Scann er Driver] win- dow are the following. [Box No.] Shows the currently selected box numbe[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scan ner 8-9 About the Net work Scanner Driver Chapter 8 [Resolution] Shows horizontal resolution (dpi) of the first page of each scanned data file. The [KONICA MINOLTA Scanner Driver ] window contains the following features. [Box No. Sel ection] Click this button to change only the bo x numb[...]

8 About the Network Scanner Driver 8-10 bizhub PRO 1050/1050e Sc anner About the Net work Scanner Driver Chapter 8 [Scanner Selection] Click this button when establishing a co nnection to an other scanner, regis- tering new scann er settings , or perfor ming editing, copying and deleting. The [Scanner Selection] window is di splaye d. In the window[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scan ner 8-11 About the Net work Scanner Driver Chapter 8 [Close ] This button is used to close the scanner driver. [Help ] This button is used to access He lp. Sorting Feature You can sort what is d isplayed by clic king [Docum ent], [Dat e & Time], [Page], [Size] and [Resolution]. Varia[...]

[...]

9 About the Sec ure Folder Chapter 9 About the Secure Folder[...]

9 About the Secure Folder 9-2 bizhub PRO 1050/1050e Scann er About the Sec ure Folder Chapter 9 9 About the Secure Folder 9.1 Overview of the Secure Folder You can perform secure printing of th e printing features using the secure folder. Secure pri nting is to not start pr inting a pri nt job unt il the co nfigured [U ser ID] and [Password] are en[...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scan ner 9-3 About the Sec ure Folder Chapter 9 9.2 Creating a Bo x (Secure Folder) After being transmitted from the print co ntroller, a print job configured as se- cure output is stored in a secure box . 0 The Box Name and Passwor d inputted by the following procedure is used in the Secure Print of [...]

9 About the Secure Folder 9-4 bizhub PRO 1050/1050e Scann er About the Sec ure Folder Chapter 9 4 Press the [Box Name Input] to dis- play the charac ter input screen. Enter any Box Name. – If you do not register a Box Name, a Box No. becomes the Box Name. – You cannot use the secure box Name already registered. – Input a Box Name within 20 ch[...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scan ner 9-5 About the Sec ure Folder Chapter 9 7 Make sure that the Box Name you registered on the box list is dis- played. – If you wa nt to create multip le boxes, return to the step 3 and repeat the procedures.[...]

9 About the Secure Folder 9-6 bizhub PRO 1050/1050e Scann er About the Sec ure Folder Chapter 9 9.3 Deleting a Bo x (Secure Folder) Delete a box in the secure folder in th e same steps as you delete a box in the personal folder or public folder. ! Detail For more information on how to delete a box (Secure Folde r), refer to "De- leting a Box ([...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scan ner 9-7 About the Sec ure Folder Chapter 9 9.4 Output from the Secure Folder Perform output from the secure folder in the sam e steps as you output from the personal folder or public folder. ! Detail For more information on how to output from the Secure Folder, refer to "Output from the HDD-[...]

[...]

10 Troubl eshoot ing Chapter 10 Troubleshooting[...]

10 Troubleshooting 10-2 bizhub PRO 1050/1050e Sc anner Troubl eshoot ing Chapter 10 10 Troubleshooting 10.1 Cannot connec t to the scanner If an error message appears when atte mpting to access th e scanner, perform the following checks: 0 Consult your network administrator about your network settings. 1 Check whether the correct IP address of the [...]

Troubleshooting 10 bizhub PRO 1050/1050e Scan ner 10-3 Troubl eshoot ing Chapter 10 ! Detail In [Controller NIC Setting] of [Network Setting], if you set [Server] of [FTP] to [Not Use], an acce ss cannot be ma de by the TW AIN driver. For more informat ion, c ontact your admi nistrator . When the Security Strengthen mode is ON, A job is unacquirabl[...]

10 Troubleshooting 10-4 bizhub PRO 1050/1050e Sc anner Troubl eshoot ing Chapter 10 10.2 When an Error Message Appears The following describes the cause and th e solution for an error message that appears during scanning. 10.2.1 Errors during scanning with the [STORE] tab During storing data with the [STORE] tab, the following errors may occur. Spa[...]

Troubleshooting 10 bizhub PRO 1050/1050e Scan ner 10-5 Troubl eshoot ing Chapter 10 10.2.2 Errors during scanning with the [SCAN] tab During scanning with the [SCAN] ta b, the following errors may occur. Space shortage of the print controller's internal HDD (HDD-B) Free space on the print controlle r's in ternal HDD may have become less t[...]

10 Troubleshooting 10-6 bizhub PRO 1050/1050e Sc anner Troubl eshoot ing Chapter 10 Solutions To increase free space on the print co ntroller's intern al HDD, try eith er of the followings. - Delete scanne d data stor ed on the print con trolle r's internal HDD using the KONICA MINOLTA Scanner Driver. – For more information to delete im[...]

11 Utility Tools Chapter 11 Utility Tools[...]

11 Utility Tools 11-2 bizhub PRO 1050/1050e Sc anner Utility Tools Chapter 11 11 Utility Tools 11.1 PageScope JobEditor Using PageScope JobEditor enables you to import the copier's image da ta (copied data) from a computer on the network to edit/process them. Also, you can transmit image data stored on a computer to the copier to print them ou[...]

Utility Tools 11 bizhub PRO 1050/1050e Scan ner 11-3 Utility Tools Chapter 11 11.1.1 How to use PageSc ope JobEditor To use PageScope JobEditor, you need to configure the conn ection be- tween your computer and the copier. Basic window [Shift X] You can shift th e horizontal print ing position by the 0.01mm. Dependin g on the resolution employed, t[...]

11 Utility Tools 11-4 bizhub PRO 1050/1050e Sc anner Utility Tools Chapter 11 [File] - [connect] - [JOB Restore] This makes the copier to output th e computer-s tored copie d data. [File] - [connect] - [JOB Edit] Edit the copied data stored in the copi er. [File] - [Uncompre ss All] Uncompress all compressed copied data imp orted to the computer in[...]

Utility Tools 11 bizhub PRO 1050/1050e Scan ner 11-5 Utility Tools Chapter 11 Printing Setting window [Prin t] Specify the number of copies to outpu t. [After transfer copier work] - [print immediately] The copier outputs image data immediately after reception. - [proof print and wait] The copier outputs one copy and stops afte r receiving image da[...]

11 Utility Tools 11-6 bizhub PRO 1050/1050e Sc anner Utility Tools Chapter 11 Settings window [Copies IP Address] Configure the copier's IP Address. [Setting temporary folder] Specify the storage location for the image data imported from the copier. [User ID setting] Enter a value if the conf iguration of User Authentica tion is done. ! Detail[...]

Utility Tools 11 bizhub PRO 1050/1050e Scan ner 11-7 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditor. For more informati on, please refer to Help. Refer to Help in the following steps. 1 Select Windows’s [Start] menu - [All Programs] - [KONICA MINOLTA] - [PageScope JobEdito[...]

11 Utility Tools 11-8 bizhub PRO 1050/1050e Sc anner Utility Tools Chapter 11 11.2 PageScope JobEditorServer To store image data sent from the copi er on your computer automatically, in- stall PageScope JobEditorServer on your computer. ! Detail The JOB control file na med HEAD and image data file s are sent to a com- puter. Image data are in th e [...]

Utility Tools 11 bizhub PRO 1050/1050e Scan ner 11-9 Utility Tools Chapter 11 11.2.1 How to use PageSc ope JobEditorServer When PageScope JobEditorServer re ceives image d ata from the copie r, cre- ate a directory according to the prior configuration to automatica lly store da- ta. Edit, process and output image data with PageScope JobEditor. For [...]

11 Utility Tools 11-10 b izhub PRO 1050/1050e Sc anner Utility Tools Chapter 11 ! Detail By default, C:My DocumentJEjobs is specified. To change this, click the [Change] button and specify a fold er. [Save job name] You can choose how to name a Folder Na me for automatically received im- age data. [sequential number] 8-digit sequential numbers ar[...]

Utility Tools 11 bizhub PRO 1050/1050e Scan ner 11-11 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditorServer. For more information, please refer to Help. Refer to Help in the following steps. 1 Select Windows' [Start] menu - [All Programs] - [KONICA MINOLTA] - [PageScope [...]

[...]

12 Appendix Chapter 12 Appendix[...]

12 Appendix 12-2 bizhub PRO 1050/1050e Sc anner Appendix Chapter 12 12 Appendix 12.1 Gloss ary Item Description 10BASE-T/100BASE- TX/ 1000BASE-TX Types of specifications in compliance with the Ether- net standard. Cables made of two stran ded copper wire rods are used. Communication speed is 10Mbps with 10 Base-T, 100Mbps with 100Bas e-TX, and 1000[...]

Appendix 12 bizhub PRO 1050/1050e Scan ner 12-3 Appendix Chapter 12 Gateway Hardware or software s erving as a poin t connecti ng networks. Not only connecting, it converts the for- mat, address, protoc ol, etc. of the data a ccording to the networ k to be connected . Hard disk Mass storage device to save data. The data is maintained even if the po[...]

12 Appendix 12-4 bizhub PRO 1050/1050e Sc anner Appendix Chapter 12 PostScript Representative page description lan guage generally used for printing requiring specifically high quality, developed by US Adobe. ppm Abbreviation of Pages Per Minute. Unit to indicate the number of sheets whic h can be printed in one minute. Printer driver Software acti[...]

Appendix 12 bizhub PRO 1050/1050e Scan ner 12-5 Appendix Chapter 12 12.2 Index B Box No. ........ .................... ........ 5-6 Boxes ........ .................... ........... 4-4 C Control Panel ............. .............. 3-2 Copied Data ............. ................ 4-2 Creating a Box ......... .............. 4-12 D Direct Call ....... ...[...]

MEMO[...]

MEMO[...]

MEMO[...]

56UE97932E 2006 2006.10 3 www .k onicaminolta.com[...]