Konica Minolta 1050E manual

Chapter 1 : Introduction Chapter 2 : Overview of the Scanning Features Chapter 3 : Before Using the Scanning F eatures Chapter 4 : About the Copied Data Processing Features Chapter 5 : About the Network Scanner F eatures Chapter 6 : Configuring Destination with the Network Scanner F eatures Chapter 7 : Using the Network Scanner F eatures Chapter 8 [...]

bizhub PRO 1050/1050e Scanner i Table of contents 1 Introduction 1.1 Introduction . ................. ................. ................ ................. ................. .. 1-2 1.1.1 ACKNOWLEDGEMENTS: .... ................. ................. ................ ........ 1-2 1.1.2 EXEMPTION ........ ................. ................. ..............[...]

ii bizhub PRO 1050/1050e Scann er 4 About the Copied Data Processing Features 4.1 Overview of the STO RE/RECALL Features .. ................. ..................4-2 4.1.1 About folders and boxes .......... ...... ..... ................. ................. ..........4-4 4.2 About Screens of the STORE/RECALL Tabs .......... ................. .......4-6[...]

bizhub PRO 1050/1050e Scanner iii 6.2 Registering an E-Mail Add ress .................. ................ .................... .. 6-4 6.3 Registering the HDD-B ... ............................ ................................. ..... 6-6 6.4 Registering the FTP server ....... ................. ................... ................. .. 6-9 6.5 Register[...]

iv bizhub PRO 1050/1050e Scann er 11 Utility Tools 11.1 PageScope JobEdit or ...................... .............. ................. ................11-2 11.1.1 How to use PageScope JobEditor . ................... ................. ...........11-3 11.2 PageScope JobEditorServer ........... ........ ................. ................. .....11-8 11.2[...]

1 Introducti on Chapter 1 Introduction[...]

1 Introduction 1-2 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1 Introduction 1.1 Intro duction Thank you very much for purchasing the bizhub PRO 1050/105 0e. This User's Guide describes the op erating procedures and safety precau- tions of the bizhub PRO 1050/1050e so that you can ha ndle it safely and make the best of its capabil i[...]

Introduction 1 bizhub PRO 1050/1050e Scanner 1-3 Introducti on Chapter 1 1.1.3 OpenSSL Statement OpenSSL License Copyright (c) 1998-2000 The OpenSSL Project. All ri ghts reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the following con d itions are met: 1. Redistributions of [...]

1 Introduction 1-4 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@crypt- soft.com). The implementation was writte n so as to conform with Netscape’s SSL. This library is free f[...]

Introduction 1 bizhub PRO 1050/1050e Scanner 1-5 Introducti on Chapter 1 GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI- TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) AR ISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED [...]

1 Introduction 1-6 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1.2 Composition of User's Guide This machine is provided with the follo wing user's guides as printed matters. User's Guide - Copier This guide describes an outline of the machine and copy operations. Please refer to this guid e for safety information, tu rning [...]

Introduction 1 bizhub PRO 1050/1050e Scanner 1-7 Introducti on Chapter 1 1.3 About this Manual This manual is the User's Guide for bizhub PRO 1050/105 0e Network Scan- ner features. This manual describes the following features operated on the Control Panel. - [SCAN] tab, [STORE] tab, [RECALL] tab 2 Reminder A screen display may chan ge with de[...]

1 Introduction 1-8 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1.3.1 Manual Composition This manual is composed of the following 12 chapters: Chapter 1 Introduction This chapter describes this User's Guide. Chapter 2 Overview of the Scanning Features This chapter overviews the Network Scanne r features and th e Copied Data Processing[...]

Introduction 1 bizhub PRO 1050/1050e Scanner 1-9 Introducti on Chapter 1 1.3.2 Conventions Used in this Manual Notation of each product The following abbreviations are used in this m anual: 1 bizhub PRO 1050/1050e Printer/Copier: copier 2 bizhub PRO 1050/1050e Print Controller: print controller 3 A printing system that combines the above (1) and (2[...]

1 Introduction 1-10 bizhub PRO 1050/1050e Scann er Introducti on Chapter 1 1.3.3 Utility Tools of This Product The utility tools used in the Network Scanner featu res are as follows. For more information on how to operate the utility tools, refer to t he User's Guide for the each or the correspon ding pages of this manual. KONICA MINOLTA Scann[...]

Introduction 1 bizhub PRO 1050/1050e Scanner 1-11 Introducti on Chapter 1 1.3.4 How to read this Manual 6 Configuring Destination for the Network Scanner Features 6.2 Registering an E-Mail Address When using the function to send the scanned data as an E-Mail attached file, you can register the destination E-Mail address in advance. The registration[...]

[...]

2 Overview of the Scan ning Features Chapter 2 Overview of the Scanning Features[...]

2 Overview of the Scanning Features 2-2 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 2 Overview of the Scanning Features 2.1 Overview of Features and Connection Modes The copier has the Network Scanner features and the Copied Data Process- ing Features. 2.1.1 About the HDD The copier has two types of internal HD Ds; th[...]

Overview of the Scanning Features 2 bizhub PRO 1050/1050e Scanner 2-3 Overview of the Scan ning Features Chapter 2 2.1.2 Copied Data Processing Features The Copied Data Proces sing features enable you to import and process cop- ied documents that are conver ted to digi tal data (copied da ta) and stored on the internal HDD (HDD-A) of the copier usi[...]

2 Overview of th e Scanning Features 2-4 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 ! Detail For more information on the Copied Data Processing Features, refer to "About the Copied Data Proce ssing Features" on Page 4-2. For more information on PageScope JobEditor, refer to "PageScope JobEditor" o[...]

Overview of the Scanning Features 2 bizhub PRO 1050/1050e Scanner 2-5 Overview of the Scan ning Features Chapter 2 2.1.3 Network Scanner Features The Network Scanner features ena ble the followings by converting a scanned document to digital data. The Network Scanner features are op era ted by using the [SCAN] tab. ! Detail To use the copier as a n[...]

2 Overview of th e Scanning Features 2-6 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 2.2 Product Specifications For information on the prod uct specifications of the copier, the print control- ler and the network, refer to the User's Guide for the each or contact your administrator for the each. Product Specifica[...]

3 Before Using the Scanning Feat ures Chapter 3 Before Using the Scanning Features[...]

3 Before Using the Scanning Featu res 3-2 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3 Before Using the Scanning Features 3.1 About the Con trol Pan el For detailed information on names and functions of variou s parts of the Con- trol Panel, refer to the User's Guide (Copy). No. Description 1 Power Switch turns[...]

Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-3 Before Using the Scanning Feat ures Chapter 3 8 Star t LED lights in green wh en machine operation is available, and turns red if any operation cannot be started. 9 [C] (Clear quantity) allows resetting of print quantity. 10 Access sets the machine to allow copying/ scanning/pr[...]

3 Before Using the Scanning Featu res 3-4 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.2 How to operat e the Touch Panel To operate the Copied Data Processing Features/Network Scanner features , use the Touch Pa nel of the copier. ! Detail You can select an item by touchin g keys lightly on the Touch Panel. Select a[...]

Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-5 Before Using the Scanning Feat ures Chapter 3 ! Detail You may also input values through the Keypad on the Control Panel. For more information on how to input characters, refer to "How to Input Characters" on Pa ge 3-6. To switch between pages When all items cannot be[...]

3 Before Using the Scanning Featu res 3-6 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.3 How to Input Characters As you touch the item where you can input characters, the character input screen appears. You can input alphabets an d signs. Character array is the same with compu- ter keyboards. 3.3.1 About keys on the[...]

Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-7 Before Using the Scanning Feat ures Chapter 3 3.4 How to Search The Copied Data Proce ssing Features/Network Scan ner features enables you to search th e registered destination and specif ied storage location by their names. You can also search the stored Box No.. 3.4.1 Destina[...]

3 Before Using the Scanning Featu res 3-8 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.4.2 Searching a box/file In the Copied Data Processing Features, you can searc h quickly the desired box out of the boxes created on the HDD-A b y its Box No.. Also, if you know the Folder Name, Bo x Name and File Name, you can pe[...]

Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-9 Before Using the Scanning Feat ures Chapter 3 ! Detail Pressing the [Cancel] key ca ncels the input Box No., and the No. Search screen closes. If a password is configured for the box, you need to enter the password. Direct Call If you know all the registered Folder Name, Box Na[...]

3 Before Using the Scanning Featu res 3-10 bizhub PRO 1050/1050e Scann er Before Using the Scanning Feat ures Chapter 3 4 Input the File Name and press the [OK] key . – When a corresponding file does not exist, the message "Failed direct call " appears. Confirm that the Folder Name, Box Name and File Name are correct, and return to the [...]

Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-11 Before Using the Scanning Feat ures Chapter 3 3.5 Thumbnail When transmitting or outputting the da ta stored in the HDD-A, contents of the data can be confirmed in advance by displaying the thumbnail. ! Detail For more information of HDD-A to be used, refer to “About the HDD[...]

[...]

4 About the Copie d Data Processing Featur es Chapter 4 About the Copied Data Processing Features[...]

4 About the Copied Data Processing Features 4-2 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4 About the Copied Data Processing Fea- tures 4.1 Overview of the ST ORE/RECALL Features Copied data stored in the HDD(HDD-A) in the copier main body can be un- loaded into the computer using the attach ed utility tool[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-3 About the Copie d Data Processing Featur es Chapter 4 ! Detail PageScope JobEditor and PageScope JobEditorServer for USA are ex- cluded. About how to obtain PageScope Jo bEditor and PageScope JobEditorS- erver, contact your service representative. When Security Stre ngth[...]

4 About the Copied Data Processing Features 4-4 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4.1.1 About folders and boxes Copied data are managed by boxes created in fo lders on the HDD-A. About Fol ders Use the [STORE] tab to store the data r ead in from the copier's ADF or the original scanning glass o[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-5 About the Copie d Data Processing Featur es Chapter 4 Types of a folder, box and file ! Detail For more information on the Secure Folder, refer to Chapter "9 About the Secure Folder". Types of a folder, box and file Number Create/Delete Naming Personal Folder M[...]

4 About the Copied Data Processing Features 4-6 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4.2 About Screens of th e STORE/RECALL Tabs Screens of the STORE/RECALL tabs incl ude such screens on which to spec- ify a storage location as the folder lis t scre en (Personal Folder), the box list screen (Personal F[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-7 About the Copie d Data Processing Featur es Chapter 4 4.3 Registering a Personal Folder A Personal Folder is registered (created) for each user, wh ere you manage data you want to STORE/RECALL. Regist er a Personal Fol der in the follow- ing steps. ! Detail At maximum, 1[...]

4 About the Copied Data Processing Features 4-8 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4 Press the [New Register] key. 5 Press the [Folder Name Input] key to display the ch aracter input screen. Input an y Folder Name. – Input a Folder Na me within 64 characters in alphameric cha r- acters and signs. ?[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-9 About the Copie d Data Processing Featur es Chapter 4 7 Press the [OK] key. The box list screen appears. 8 If you register only a folder, press the [Cancel] key to go to the step 9. If you register a box also, go to the step 4 "Creating a Box (Per- sonal Folder/Publ[...]

4 About the Copied Data Processing Features 4-10 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.4 Deleting a Pe rsonal Folder To delete a registered Personal Fol d er, follow the steps below. 1 Select the [RECALL] tab. 2 Press the [Personal Folder] key. 3 Select the folder you want to de- lete.[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-11 About the Copie d Data Processing Featur es Chapter 4 4 Press the [Folder Delete] key. – If a Password is not configured for the Folder, a screen ap- pears and confirms you whether to delete the folder. Go to the step 6. If a Password is configured for the Folder, the[...]

4 About the Copied Data Processing Features 4-12 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.5 Creating a Bo x (Personal Folder/Public Folder) The copied data are ma naged in boxes created in the folders of the HDD-A (Personal Folder/Public Folder). Crea te a box by the following steps. ! Detail At maximum[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-13 About the Copie d Data Processing Featur es Chapter 4 – For more information on the types of folder, refer to "Overview of the STORE/RECALL Features" on Page 4-2. – When you sel ect a Public Fold- er Press the [Public Folder] key. 4 Press the [New Box] key[...]

4 About the Copied Data Processing Features 4-14 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 If you do not register a Box Na me, the Box No. becomes the Box Name. 6 If you configure a Password for a box, press the [Password Input] key to display the character input screen. Enter any Password. – Input a Pas[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-15 About the Copie d Data Processing Featur es Chapter 4 9 If you register only a box, press the [Return] and go t o the step 10. If you go on to store data on the HDD-A, go to the step 5 of “Scan- ner to HDD” on Page 4-22. 10 Make sure that the Box Name you re gistere[...]

4 About the Copied Data Processing Features 4-16 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.6 Deleting a Box (Personal Folder/Public Folder/Secur e Folder) Delete a box in the following steps. 1 Select the [RECALL] tab. 2 Select a folder. – When you select a Personal Folder Press the [Personal Folder] k[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-17 About the Copie d Data Processing Featur es Chapter 4 – When you select a Secure Folder Press the [Secure Folder] key. 3 Select the box you want to delete. – When you select a Personal Folder – When you sel ect a Public Fold- er – When you select a Secure Folder[...]

4 About the Copied Data Processing Features 4-18 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – When you select a Personal Folder – When you sel ect a Public Fold- er – When you select a Secure Folder If a Password is configured for the box, the Password input screen appears. If a Password is not config[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-19 About the Copie d Data Processing Featur es Chapter 4 6 Press the [Yes] key. The box is deleted, and the box list screen appears. 7 Confirm that the box is deleted. – When you select a Personal Folder – When you sel ect a Public Fold- er – When you select a Secure[...]

4 About the Copied Data Processing Features 4-20 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.7 Selecting a St orage Location If you want not to print but to store copied data, select a storage location by using the [STORE] tab. Copied data can be stored in either of the following thre e types of storage lo[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-21 About the Copie d Data Processing Featur es Chapter 4 2 Press the [Scanner to HDD] key. 3 Select a folder in which you store data. – When you select a Personal Folder – Press the [Personal Folder] key to display the list. Select the folder and pres s the [OK] key. ?[...]

4 About the Copied Data Processing Features 4-22 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – In case of Public Folder – Press the [No. Search] key and enter a Box No. to select a box by Box No.. For more informa- tion, refer to "No. Search" on Page 3-8. – For information on how to cre- ate [...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-23 About the Copie d Data Processing Featur es Chapter 4 8 Set an original and press the [ Start] button. The original is scanned, and the copied data are stored in a speci fied box. The continuous storage con firmation screen appears. 9 To continue storing data, press the[...]

4 About the Copied Data Processing Features 4-24 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Scanner to PC You can transmit copied data from the copier to a computer to store them by using PageScope JobEditor/PageS cope JobEdito rServer. PageScope JobEditor or PageScope JobEditorServe r needs to be installed[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-25 About the Copie d Data Processing Featur es Chapter 4 Store copied data in a comp uter in the following steps. 1 Select the [STORE] tab. 2 Press the [Scanner to PC] key. The setting screen appears. 3 Configure the nece ssary items. – For more info rmation on the confi[...]

4 About the Copied Data Processing Features 4-26 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 5 Connect to the copier through Page Scope Jo bEditor installed on the computer, and store the copied da ta. PageScope JobEditorServer re- ceives data automatically. – For more information on how to operate PageSco[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-27 About the Copie d Data Processing Featur es Chapter 4 HDD to PC You can transmit c opied data stored on the HDD-A to a computer to store them by using PageScope JobEditor/P ageScop e JobEditorServer or FTP/ SMB. Set up the data transmitting method to PC beforehand. ! De[...]

4 About the Copied Data Processing Features 4-28 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Select a Folder. – When you select a Personal Folder – Press the [Personal Folder] key to display the list. Select any folder and pres s the [OK] key. – If a Password is configure d for the Personal Folder, t[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-29 About the Copie d Data Processing Featur es Chapter 4 – In case of Public Folder – If a Password is configure d for the box, the Password input screen appear s. Enter the Password. – Press the [No. Search] key and enter a Box No. to search a box by Box No.. For mo[...]

4 About the Copied Data Processing Features 4-30 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 7 Confirm the File Name, FTP Ad- dress, SMB Address and select File Form and press [OK] key. – If a file name longer than 21 characters has been set for the file, cha racters on the 21st and on are automatically de[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-31 About the Copie d Data Processing Featur es Chapter 4 4.8 About the Copied Data Storage Setting Screen On the Copied Data Storage Setting scre en, such settings as original set- tings and quality settin gs can be configured. ! Detail Those settings that can be configure[...]

4 About the Copied Data Processing Features 4-32 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Special Image Pressing the [Speci al Image] key ena- bles you to configure the following set- tings. Special Image Lighter, Normal, Darker AES (AE) Zoom Pressing the [Zoom] key enables you to configure the foll owing[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-33 About the Copie d Data Processing Featur es Chapter 4 Application Annotation Pressing the [Annotation ] key enables you to configure the following settings. Frame/Folder Eraser Pressing the [Frame/Folder Eraser] key enables you to configure the following settings. All-I[...]

4 About the Copied Data Processing Features 4-34 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.9 Changing Data Transmission Method to PC There are 3 methods to transmit copied data to the computer: [Transmit to PC], [Operate on PC] and [FTP/SMB]. ! Detail Network settings are need ed to transmit copied data [...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-35 About the Copie d Data Processing Featur es Chapter 4 ! Detail An administrator needs to speci fy the IP Address of the target c omputer on the copier. For more informat ion, contact your administrator. For more information on PageScope JobEditorServer, refer to "P[...]

4 About the Copied Data Processing Features 4-36 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Press the [Transmit to PC] key. – If you have not spec ified a tar- get computer on the copier, you cannot select the [Trans- mit To PC] key. For more infor- mation, contact your administrator. 4 Press the [OK] k[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-37 About the Copie d Data Processing Featur es Chapter 4 Operate on PC If you configure the receiving operat ion on a PC, the computer with Page- Scope JobEditor can receive copied da ta. ! Detail For more information on PageScope JobEditor, refer to "PageScope JobEdi[...]

4 About the Copied Data Processing Features 4-38 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Press the [Operate on PC] key. 4 Press the [OK] key to close the screen.[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-39 About the Copie d Data Processing Featur es Chapter 4 FTP/SM B By setting the FTP/SMB in advance, copied da ta stored in the HDD-A can be converted to PDS/TIFF data and transmi tted to the FTP server or SMB serv- er. ! Detail For more information of HDD-A to be used, re[...]

4 About the Copied Data Processing Features 4-40 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4 Press the [OK] key to close the screen.[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-41 About the Copie d Data Processing Featur es Chapter 4 4.10 Output from the HDD-A Co pie d da ta s tor ed o n th e HD D-A wit h the [STORE] tab or secure print jobs transmitted from a computer can be output using the [RECALL] tab. ! Detail For more information of HDD-A t[...]

4 About the Copied Data Processing Features 4-42 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – When you select Secure Fold- er – Press the [Secure Folder] key. – For more info rmation on the types of folder, refer to "Over- view of the STORE/RECALL Features" on Page 4-2. – A Password may be[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-43 About the Copie d Data Processing Featur es Chapter 4 formation, refer to "No. Search" on Page 3-8. – If you know the target file, press th e [Direct Call] key to specify the location directly. For more inform ation, refer to "Direct Call" on Page [...]

4 About the Copied Data Processing Features 4-44 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 7 To continue recalling data, press the [Yes] key. To finish recalling data, press the [No] key. – Pressing the [Yes] key displays the file list screen. Return to the step 4 and repeat the pro- cedures.[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-45 About the Copie d Data Processing Featur es Chapter 4 4.11 About the Recall Ta b’s Output Setting Screen On the Recall Tab’s Ou tput Setting screen, you can configure the settin gs for outputting stored copied data or secure output print jobs. ! Detail On how to ope[...]

4 About the Copied Data Processing Features 4-46 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Auto Output If this key is pressed, the output start s without pressing the start butt on. Button Function[...]

About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-47 About the Copie d Data Processing Featur es Chapter 4 The flow of operation of the Wait Output and Proof Output Change settings Change settings Output the one sheet for a confirmation Exit the operation as it is. Output it by the present settings If it is in the state i[...]

[...]

5 About the Netw ork Scanner Features Chapter 5 About the Network Scanner Features[...]

5 About the Network Scanner Features 5-2 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5 About the Network Scanner Features 5.1 Overview of the Ne twork Scanner Features The Network Scanner featur es to use the intern al HDD (HDD-B) of the print controller are operated on the SCAN tab sc reen. Data scanned by the Netw [...]

About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-3 About the Netw ork Scanner Features Chapter 5 ! Detail "About the Scanner Setting Basic Screen" .. p.7-26 To use the copier as a network sca nner, it needs to be connected to the network. For more information on th e network confi guration, contact your network adminis[...]

5 About the Network Scanner Features 5-4 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5.2 Send by an E-Mail You can send the data re ad in from the copier's ADF or the original scann ing glass (scanned data) to an E-Mail ad dress as an attach ed file. For detailed information on how to op erate the function, refe[...]

About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-5 About the Netw ork Scanner Features Chapter 5 ! Detail When the E-Mail is in excess of the maximum transmission size that has been set, it is not sent to the SMTP server, but cancelled on the bizhub PRO 1050/1050e. Transmission from the copier is up to the STMP server. If the ne[...]

5 About the Network Scanner Features 5-6 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5.3 Store on the HDD-B In order to store the data read in from the copier's ADF or the original sca n- ning glass (scanned data) on the HDD-B, you need to configu re boxes on the HDD-B in advance. The sca nned data are stored in[...]

About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-7 About the Netw ork Scanner Features Chapter 5 5.4 Send to the FTP se rver You can send the data re ad in from the copier's ADF or the original sc anning glass (scanned data) to the FTP server. The scanned data sent to the FTP se rver can be downloaded from comput- ers that [...]

5 About the Network Scanner Features 5-8 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 You can register a Host Address, File Path, Login Name and Password in ad- vance. For information on how to regist er them, refer to "Registering the FTP server" on Page 6-9. 2 Reminder Depending on a network condition, tr [...]

About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-9 About the Netw ork Scanner Features Chapter 5 5.5 Send to the SMB server You can send the data re ad in from the copier's ADF or the original sc anning glass (scanned data) to the SMB server. The scanned data sent to the SMB serv er can be file-share d with computers with t[...]

5 About the Network Scanner Features 5-10 bizhub PRO 1050/1050e Scann er About the Netw ork Scanner Features Chapter 5 2 Reminder Depending on a network co ndition, transmission to the SMB server may damage the scanned data. Make sure that the sca nned data are not damaged.[...]

About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-11 About the Netw ork Scanner Features Chapter 5 5.6 Send to a Group If you register multiple destinations/storage locati ons as a Group, you ca n send/store the data read in from the copier's ADF or the original scanning glass (scanned data) to them at one time. - At maximum[...]

5 About the Network Scanner Features 5-12 bizhub PRO 1050/1050e Scann er About the Netw ork Scanner Features Chapter 5 5.7 Use the Networ k Scanner Features To scan data using the Network Scanne r features, follow the flow below. Specifying destination Configuring the scanner P erform scanning Registering destination Did you register the destinatio[...]

6 Configuring Destination for the Network Scanner Features Chapter 6 Configuring Destination for the Network Scanner Features[...]

6 Configuring Destination for the Network Scanner Featu res 6-2 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6 Configuring Destination for the Network Scanner Features 6.1 About Regi stration When you transmit sc anned data to de stinations/storage locations, you can input a destination every time[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-3 Configuring Destination for the Network Scanner Features Chapter 6 6.1.2 The keys on the Destination Manual Input screen You can register a destination in the Dest ination Manual Input screen. On how to display the Destination Manual Input screen, refer to[...]

6 Configuring Destination for the Network Scanner Featu res 6-4 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6.2 Registering an E-Mail Address When using the function t o send the sc anned data as an E-Mail attached file, you can register the destination E-Mail address in advance. The registrat io[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-5 Configuring Destination for the Network Scanner Features Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen. – For more information on how to input characters, refer to "[...]

6 Configuring Destination for the Network Scanner Featu res 6-6 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6.3 Registering the HDD-B If you want to store the scanned data on the HDD-B, you need to register boxes on the HDD-B.The registration is done in the following steps. ! Detail For more info[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-7 Configuring Destination for the Network Scanner Features Chapter 6 your administrator of the copier. The Manual Address scre en appears. 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen[...]

6 Configuring Destination for the Network Scanner Featu res 6-8 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 5 Press the [Register] key. Pressing this key brings you back to the Select Destinations/Storage Locations screen (HDD). 6 Make sure that the registered Name is displayed. ! Detail If the d[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-9 Configuring Destination for the Network Scanner Features Chapter 6 6.4 Registering the FTP server If you want to send t he scanned data to the FTP server, you can register the destination FTP server. The registrati on is don e in the following step s. ! De[...]

6 Configuring Destination for the Network Scanner Featu res 6-10 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each it em displays the character input screen . – For more information on how to input characters, refer to &q[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-11 Configuring Destination for the Network Scanner Features Chapter 6 6 Make sure that th e registered Name is displayed. ! Detail If the desired Name is not di splaye d on the page, pre ss [ ▼ ] / [ ▲ ] to switch between pages. An administrator is to ed[...]

6 Configuring Destination for the Network Scanner Featu res 6-12 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 6.5 Registering the SMB server If you want to send the scanned data to the SMB server, you can register the destination SMB server. The registration is done in the following steps. ! Deta[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-13 Configuring Destination for the Network Scanner Features Chapter 6 The Manual Address scre en appears. 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen. – For more information on how[...]

6 Configuring Destination for the Network Scanner Featu res 6-14 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 6 Make sure that the registered Name is displayed. ! Detail If the desired Name is not di splayed on the page, press [ ▼ ] / [ ▲ ] to switch between pages. An administrator is to edit[...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-15 Configuring Destination for the Network Scanner Features Chapter 6 6.6 Registering a Group If you want to send the scanned data to multiple destinations/storage loca- tions, you can register them as a Group. The registration is done i n the fol- lowing st[...]

6 Configuring Destination for the Network Scanner Featu res 6-16 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 4 Press the [Group Name] key, and input a Group name on the char- acter input screen. – For more information on how to input characters, refer to "How to Input Characters" on [...]

Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-17 Configuring Destination for the Network Scanner Features Chapter 6 9 Make sure that th e registered Name is displayed. ! Detail If a large number of registrations ha ve been made and the desired Name is not displayed on the page, press [ ▼ ] / [ ▲ ] t[...]

[...]

7 Using the Network Sca nner Features Chapter 7 Using the Network Scanner Features[...]

7 Using the Network Scanner Features 7-2 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 7 Using the Network Scanner Features 7.1 The keys on the Select Destinations/Storage Loca- tions Screen In order to run scanning, you need to specify a destination/storage location to which you send the scan ned data. The following p[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-3 Using the Network Sca nner Features Chapter 7 Button Function [A-C] - [W-Z] k ey (Index key) When this key is pr essed, the first alphabet characte r of the reg- istered name corresponding to the key is displayed. [No. etc]* Names with initial let ter in numbers or signs are dis[...]

7 Using the Network Scanner Features 7-4 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 7.2 Transmission to an E-Mail Address When you send the scann ed data as an attached file of an E-Ma il, necessary procedures depend on whether the a ddresses are registered in advance or they are input ma nually. ! Detail Refer to t[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-5 Using the Network Sca nner Features Chapter 7 3 If you want to put a Title on an E- Mail, press the [Title] key. – Not putting any Title will no t cause any problem. An E-Mail without a Title wi ll be sent with the scanned data being at- tached. 4 Press [1] - [5] or the [Manua[...]

7 Using the Network Scanner Features 7-6 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 6 Press [1] - [5] or the [Manual Inp ut] key to determine the Sentence and press the [OK] key. – Pressing the [Manual Input] key displays the character in- put screen. – For more information on how to input characters, refer to &[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-7 Using the Network Sca nner Features Chapter 7 9 Configure the nece ssary items. – For more info rmation on the configurations on the Scann er Setting Basic screen, refer to "About the Scanner Setting Basic Screen" on Pa ge 7-26. 10 Set an original and press the [ Sta[...]

7 Using the Network Scanner Features 7-8 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 When an E-Mail Address is Input Manually 1 Follow the Step 1 to 6 of "When an E-Mail Address is Already Regis- tered" on Page 7-4. 2 Press the [Manual Address] key. – If you select a destination from the regis try, refer [...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-9 Using the Network Sca nner Features Chapter 7 7.3 Storage on the HDD-B When you store the scanned data on the HDD-B, necessary procedures de- pend on whether or not the boxes are registered in advance. ! Detail Refer to the following pages. "When a Box is Alre ady Registere[...]

7 Using the Network Scanner Features 7-10 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 3 Press the Name of the Box No.. – You can refine the registered destination by the search fun c- tion. For more information on how to search, refer to "How to Search" on Page 3-7. – You can refine the Name by the sea[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-11 Using the Network Sca nner Features Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen. Return to step 5 and repeat the proce- dures.[...]

7 Using the Network Scanner Features 7-12 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 When a Box is Not Registered 1 Follow the Step 1 to 2 of "When a Box is Already Registered" on Page 7-9. 2 Press the [Manual Address] key. – If you want to select the regis- tered box, refer to "When a Box is Alrea[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-13 Using the Network Sca nner Features Chapter 7 5 Press the [Scanner Settin g] key. The Scanner Setting Basic screen appears. 6 Follow the Step 5 an d after of "When a Box is Already Re gistered" on Page 7-9.[...]

7 Using the Network Scanner Features 7-14 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.4 Transmissio n to the FTP server When you send the scanned data to an FTP se rver, ne cessary procedures depend on whether the FTP se rver is regis tered in ad vance or it is input man- ually. ! Detail Refer to the following pag[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-15 Using the Network Sca nner Features Chapter 7 3 If you need to change the Port No., press the [Port No.] key. If unnec- essary, go to the step 5. 4 Input a Port No. and press the [OK] key . – The initial setting is 2 1. A Port No. for an FTP server is config- ured in 5-digit [...]

7 Using the Network Scanner Features 7-16 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 – To deselect the Name, press the selecte d Name again. – If you input a destination manually, refer to "When an FTP server is Input Manually" on Page 7-17. 7 Press the [Scanner Settin g] key. The Scanner Setting B as[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-17 Using the Network Sca nner Features Chapter 7 When an FTP server is Input Manually 1 Follow the Step 1 to 5 of "When an FTP server is Already Registered" on Page 7-14. 2 Press the [Manual Address] key. – If you select a destination from the registry, refer to "[...]

7 Using the Network Scanner Features 7-18 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 5 Press the [Login Name] key to in- put a Login Name . – Pressing the [Login Name] key displays the character input screen. – For more information on how to input characters, refer to "How to Input Characters" on Page[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-19 Using the Network Sca nner Features Chapter 7 7.5 Transmissi on to the SMB server When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB server is registered in advan ce or it is input manually. ! Detail Refer to the following pages. &qu[...]

7 Using the Network Scanner Features 7-20 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 3 Press the Name of the destination SMB server. – You can refine the registered destination by the search fun c- tion. For more information on how to search, refer to "How to Search" on Page 3-7. – You can refine the [...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-21 Using the Network Sca nner Features Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen. Return to step 5 and repeat the proce- dures.[...]

7 Using the Network Scanner Features 7-22 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 When an SMB server is Input Manually 1 Follow the Step 1 to 2 of "Whe n an SMB server is Already Registere d" on Page 7-19. 2 Press the [Manual Address] key. – If you select a destination from the regis try, refer to &q[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-23 Using the Network Sca nner Features Chapter 7 5 Press the [Login Name] key to in- put a Login Name . – Pressing the [Login Name] key displays the character input screen. – For more information on how to input characters, refer to "How to Input Characters" on Page [...]

7 Using the Network Scanner Features 7-24 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.6 Transmission to a Group To send the scanned data to a registered Group, follow the steps below. ! Detail For more information on how to register a Group, refer to "Registering a Group" on Page 6-15. 1 Select the [SCAN[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-25 Using the Network Sca nner Features Chapter 7 4 Press the [Scanner Screen] key. The Scanner Setting Basic screen appears. 5 Configure the nece ssary items. – For more info rmation on the configurations on the Scann er Setting Basic screen, refer to "About the Scanner Set[...]

7 Using the Network Scanner Features 7-26 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.7 About the Scanner Setting Basic Screen Pressing the [Scanner Scre en] key on the Select De stinations/Storage Loca- tions screen displays the Scanner Sett ing Basic screen. On the Scanner Set- ting Basic screen, such settings a[...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-27 Using the Network Sca nner Features Chapter 7 Original Sett ing Pressing the [Original Setting] key ena- bles you to confi gure the following set- tings. Original Setting Memory Scan Special Image Pressing the [Speci al Image] key ena- bles you to confi gure the following set- [...]

7 Using the Network Scanner Features 7-28 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 ×1.0 Application Pressing the [Application] key enables you to configure the following settings. File Edit Image Edit All Off Book Copy Pressing the [Book Copy] key enables you to con- figure the following settings. Left Binding, [...]

Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-29 Using the Network Sca nner Features Chapter 7 Scan Size Size Setting Pressing the [Size Setting] key enables you to configure the following settings. Auto Quality 600dpi, 400dpi, 300dpi, 200dpi Copy Mode Duplex, Simplex File Form Package TIFF Package PDF Division TIFF Division [...]

[...]

8 About the Networ k Scanner Driver Chapter 8 About the Network Scanner Driver[...]

8 About the Network Scanner Driver 8-2 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8 About the Network Scanner Driver 8.1 Reading in from HDD-B To read scanned data sitting on the HDD-B to a computer, you need eith er of the following. These are also used to delete scanned data from the HDD- B. - KONICA MINOLTA Scanner[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-3 About the Networ k Scanner Driver Chapter 8 8.1.1 Network Scanner Driver When the KONICA MINOLTA Scanner Driv er is installed, you can download scanned data from the HDD-B of the print controller to a computer using TWAIN-compliant applications. The scanner driver can be used on t[...]

8 About the Network Scanner Driver 8-4 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8.2 To install the Ne twork Scanner Driver To install the scanner driver, pe rform the following procedure. 1 Turn on the computer and start Windows. – Exit from all active Window s applications, if required. 2 Set the CD-ROM (bizhub P[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-5 About the Networ k Scanner Driver Chapter 8 8.3 Import Scanned Data to Computers 8.3.1 TWAIN-compliant applications can be used to read in scanned data Select a TWAIN driver (the KONICA MI NOLTA Scanner Driver) from your ap- plication, select a scanner (copier ha ving scanned orig[...]

8 About the Network Scanner Driver 8-6 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 4 In the [Scanne r Box No. Set-up] win- dow, input a [Scanner Server name (IP address)] to which you connect, a [Scanner Name] for identification by the driver, a [Box No.] specified when an original was scanned, a [Password] configured [...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-7 About the Networ k Scanner Driver Chapter 8 7 You can open the read-in document withi n the application for editing/ saving. Deleting images stored on the HDD-B Perform the following step s to delete a scanned da ta file from the HDD-B. 1 Run the TWAIN-compliant application (Adobe[...]

8 About the Network Scanner Driver 8-8 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8.4 Features and Sett ings of the Netw ork Scanner Driver [KONICA MINOLTA Scanner Driver] window Information displayed on the [KON ICA MINOLTA Scanner Driver] win- dow are the following. [Box No.] Shows the currently selected box number.[...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-9 About the Networ k Scanner Driver Chapter 8 [Resolution] Shows horizontal resolution (dpi) of the fi r st page of each scanned data file. The [KONICA MINOLTA Scanner Driver ] window contains the following features. [Box No. Selectio n] Click this button to change only the box nu m[...]

8 About the Network Scanner Driver 8-10 bizhub PRO 1050/1050e Scann er About the Networ k Scanner Driver Chapter 8 [Scanner Selection] Click this button when establishing a co nnection to another scanner, regis- tering new scanner settin gs , or performing editing, copying and deleting. The [Scanner Selection] window is displ aye d. In the window, [...]

About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-11 About the Networ k Scanner Driver Chapter 8 [Close] This button is used to close the scanner driver. [Help ] This button is used to access Help. Sorting Feature You can sort what is displayed b y clic king [Document], [Dat e & Time], [Page], [Size] and [Resolution]. Variable [...]

[...]

9 About the Secure Fold er Chapter 9 About the Secure Folder[...]

9 About the Secure Folder 9-2 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 9 About the Secure Folder 9.1 Overview of the Secure Folder You can perform secure printing of th e printing featur es using the secure folder. Secure printi ng is to not start prin ting a print job unti l the configured [U ser ID] and [Password] are ente[...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-3 About the Secure Fold er Chapter 9 9.2 Creating a Bo x (Secure Folder) After being transmitted from the print co ntroller , a print job configured as se- cure output is stored in a secure box. 0 The Box Name and Password inputted by the following procedure is used in the Secure Print of pr[...]

9 About the Secure Folder 9-4 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 4 Press the [Box Name Input] to dis- play the character inpu t screen. Enter any Box Name. – If you do not register a Box Name, a Box No. becomes the Box Name. – You cannot use th e secure box Name already registered. – Input a Box Name within 20 ch[...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-5 About the Secure Fold er Chapter 9 7 Make sure that the Box Name you registered on the box list is dis- played. – If you want to create multiple boxes, return to the step 3 and repeat the procedures.[...]

9 About the Secure Folder 9-6 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 9.3 Deleting a Bo x (Secure Folder) Delete a box in the secure folder in th e same steps as you delete a box in the personal folder or public folder. ! Detail For more information on how to delete a box (Secu re Folde r), refer to "De- leting a Box ([...]

About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-7 About the Secure Fold er Chapter 9 9.4 Output from the Secure Folder Perform output from the secure folder in the same steps as you output from the personal folder or public folder. ! Detail For more information on how to output from the Secure Fold er, refer to "Output from the HDD-A[...]

[...]

10 Troubles hooting Chapter 10 Troubleshooting[...]

10 Troubleshooting 10-2 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 10 Troubleshooting 10.1 Cannot connec t to the scanner If an error message appears when atte mpting to access th e scanner, perform the following checks: 0 Consult your network administrator about your network settings. 1 Check whether the correct IP address of the s[...]

Troubleshooting 10 bizhub PRO 1050/1050e Scanner 10-3 Troubles hooting Chapter 10 ! Detail In [Controller NIC Setting] of [Network Setting], if you set [Server] of [FTP] to [Not Use], a n access cannot be ma de by the TWAIN driver. For more informatio n, contact your administrator . When the Security Strengthen mode is ON, A job is unacquirable usi[...]

10 Troubleshooting 10-4 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 10.2 When an Error Message Appears The following describes the cause and th e solution for an error message that appears during scanning. 10.2.1 Errors during scanning with the [STORE] tab During storing data with the [STORE] tab, the following errors may occur. Spac[...]

Troubleshooting 10 bizhub PRO 1050/1050e Scanner 10-5 Troubles hooting Chapter 10 10.2.2 Errors during scanning with the [SCAN] tab During scanning with the [SCAN] ta b, the following errors may occur. Space shortage of the print controller's internal HDD (HDD-B) Free space on the print controller's in ternal HDD may have become less than[...]

10 Troubleshooting 10-6 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 Solutions To increase free space on the print controller's internal HDD, t ry either of the followings. - Delete scanned data stor ed on the print controlle r's internal HDD using the KONICA MINOLTA Scanner Driver. – For more information to delete imag es[...]

11 Utility Tools Chapter 11 Utility Tools[...]

11 Utility Tools 11-2 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 11 Utility Tools 11.1 PageScope JobEditor Using PageScope JobEditor enables you to import the copier's image data (copied data) from a computer on the network to edit/process them. Also, you can transmit image data stored on a computer to the copier to print them out[...]

Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-3 Utility Tools Chapter 11 11.1.1 How to use PageScope JobEditor To use PageScope JobEditor, you need to configure the connec tion be- tween your computer and the copier. Basic window [Shift X] You can shift the h orizontal printing position by the 0.01mm. De pending on the resolution em ployed, the[...]

11 Utility Tools 11-4 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 [File] - [connect] - [JOB Restore] This makes the cop ier to output the computer-s tored copied data. [File] - [connect] - [JOB Edit ] Edit the copied data stored in the copier. [File] - [Uncompress All] Uncompress all compressed copied data imported to the computer in th[...]

Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-5 Utility Tools Chapter 11 Printing Setting win dow [Print ] Specify the num ber of copies to output. [After transfer copier work] - [print immediately] The copier outputs image data immediately after reception. - [proof print and wait] The copier outputs one copy and stops after receiving image dat[...]

11 Utility Tools 11-6 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 Settings window [Copies IP Address] Configure the copier's IP Address. [Setting temporary folder] Specify the storage location for the image data imported from the copier. [User ID setting] Enter a value if the configurat ion of User Authentication is done. ! Detail [...]

Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-7 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditor. For more informati on, please refer to Help. Refer to Help in the following steps. 1 Select Windows’s [Start] menu - [All Programs] - [KONICA MINOLTA] - [PageScope JobEditor[...]

11 Utility Tools 11-8 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 11.2 PageScope JobEditorServer To store image data sent from the copier on your computer automatically, in- stall PageScope JobEditorServer on your computer. ! Detail The JOB control fi le named HEAD and image dat a files are sent to a com- puter. Image data are in the BM[...]

Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-9 Utility Tools Chapter 11 11.2.1 How to use PageScope JobEditorServer When PageScope JobE ditorServer receives image data from the copier, cre- ate a directory according to the prior configuration to automatically store da- ta. Edit, process and output image data with PageScope JobEditor. For more [...]

11 Utility Tools 11-10 bizhub PRO 1050/1050e Scanner Utility Tools Chapter 11 ! Detail By default, C:My DocumentJEjobs is specified. To change this, click the [Change] button and specify a folder. [Save job name] You can choose how to name a Folder Na me for automatically received im- age data. [sequential number] 8-digit sequential numbers are u[...]

Utility Tools 11 bizhub PRO 1050/1050e Scanner 11 -11 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditorServer. For more information, please refer to Help. Refer to Help in the following steps. 1 Select Windows' [Start] menu - [All Programs] - [KONICA MINOLTA] - [PageScope [...]

[...]

12 Appendix Chapter 12 Appendix[...]

12 Appendix 12-2 bizhub PRO 1050/1050e Scann er Appendix Chapter 12 12 Appendix 12.1 Glossa ry Item Description 10BASE-T/100BASE-TX/ 1000BASE-TX Types of specifications in compliance with the Ether- net standard. Cables made of two stranded co pper wire rods are used. Communication speed is 10Mbps with 10Base-T, 100Mbps with 100Base-TX, an d 1000Mb[...]

Appendix 12 bizhub PRO 1050/1050e Scanner 12-3 Appendix Chapter 12 Gateway Hardware or software serving as a point conne cting networks. Not only connecting, it conve rts the for- mat, address, protocol, etc . of the data according to the network to be co nnected. Hard disk Mass storage dev ice to save data. The data is maintained even if the power[...]

12 Appendix 12-4 bizhub PRO 1050/1050e Scann er Appendix Chapter 12 PostScript Representative page description languag e generally used for printing requiring specifically high quality, developed by US Adobe. ppm Abbreviation of Pages Per Minute. Unit to indicate the number of sheets whic h can be printed in one minute. Printer driver Software acti[...]

Appendix 12 bizhub PRO 1050/1050e Scanner 12-5 Appendix Chapter 12 12.2 Index B Box No. ........... .................... ..... 5-6 Boxes ........... ................. ........... 4-4 C Control Panel ................ ........... 3-2 Copied Data ............... .............. 4-2 Creating a Box ........... ............ 4-12 D Direct Call .......... .[...]

MEMO[...]

MEMO[...]

MEMO[...]

56UE97932E 2006 2006.10 3 www .konicaminolta.com[...]