English dropdown-ico

Intel ZT 8101 10/100 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Intel ZT 8101 10/100, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Intel ZT 8101 10/100 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Intel ZT 8101 10/100. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Intel ZT 8101 10/100 should contain:
- informations concerning technical data of Intel ZT 8101 10/100
- name of the manufacturer and a year of construction of the Intel ZT 8101 10/100 item
- rules of operation, control and maintenance of the Intel ZT 8101 10/100 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Intel ZT 8101 10/100 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Intel ZT 8101 10/100, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Intel service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Intel ZT 8101 10/100.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Intel ZT 8101 10/100 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Intel® NetS tructure™ ZT 8101 10/ 100 Ethernet Switch User’s Manual February 2 0 03 Order N umber: 27 3869-00 2[...]

  • Page 2

    2 Information in this doc ument is prov ided in connection with I ntel ® products. No license, express or implied, by estoppel o r otherwise, to any intellectual property rights is granted by this docu ment. Except as provided in Intel's T erms and Conditions of Sale for such products, Intel assume s no liability whatsoever , and Intel discla[...]

  • Page 3

    3 Contents Contents 1 Introduction ... ............. ............. ............. ............. ............. ................... ............. ............. ............. .... 11 Highlights ................. ............. ............. ............. ............ ............. ............. ............. ................. 1 1 Ethernet Features .....[...]

  • Page 4

    4 Contents Storm C ontrol ....... ............. ............. ............. ............. ............. ............. ............. ....... 27 Traffic Cont rol ...... ............. ............. ............. ............. ............. ................... ............. . 28 IP Forwardi ng .......................... ............. ............ .....[...]

  • Page 5

    5 Contents Creating Us er Account s . ............. ............. ............. ............. ............. ............. .......... 50 To create a new us er accoun t ........ ............. .................... ............. .......... 5 0 Admin and User Pr ivileges ....... ............. ............. ................... ............. .... 51 To lo[...]

  • Page 6

    6 Contents To configu re storm c ontrol .... ............ ............. ............. ............. ............. . 72 To configu re advan ced traf fic control .................... ............. ............. ....... 72 To configu re static I P routes .................... ............. ............. ............. ....... 73 To configu re static A R[...]

  • Page 7

    7 Contents Admin and User Pr ivileges ....... ............. ............. ................... ............. .... 94 Saving Chan ges ............ ....... ...... ....... ...... ...... ....... ...... ....... ...... ....... ...... ............. .... 9 4 To retain a ny confi guration changes permanen tly ... ............. ............. .... 94 Restart .[...]

  • Page 8

    8 Contents To configu re multi cast MA C address fo rwardin g ........ ............. ............ 1 15 To configu re storm c ontrol .... ............ ............. ............. ............. ............ 115 To configu re advan ced traf fic control .................... ............. ............. ..... 116 To configu re static I P routes .........[...]

  • Page 9

    9 Contents Intel® N etStruct ure™ Comp ute Boa rds & Pla tform Produ cts Limite d Warr anty136 B Serial Cable ................ ............. ............. ............. ............. ............. ................... ............. ............. . .1 3 9 B.1 Pin Assignm ents ................... ............. ............. ............ .......[...]

  • Page 10

    10 Contents[...]

  • Page 11

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 11 Introduction 1 The Intel® NetS t ructure™ ZT 8101 1 0/100 Ether net Switch is a high perform ance managed switch that su pports both Layer 2 and Layer 3 features. For fast connection speeds an d flexibility , it has 24 10 /100 Mbps F ast E thernet port s and 2 g igab[...]

  • Page 12

    12 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Introduction • Per device packet buf fer: 512 KB • 8.8 Gbps s witching fab ric capacity • Store an d forward switc hing mo de • 8 KB for MAC add ress caching • Broadcast and mult icast storm contr ol • Port mir ro ring • IEEE 802.3ad link aggregation •[...]

  • Page 13

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 13 Introduction Management Functions • RS-232 port for out-of-b and managem ent and system diagnost ics • T elnet remote control console • W eb- based mana gement consol e • SNMP v1 and SN MP v2 c Agen t • Support ed MIBs — MIB-II —B r i d g e M I B — RMON [...]

  • Page 14

    14 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Introduction Mechani cal • Measures 9.2" x 6 .3" (233 .35 mm x 160 mm) • W idth : 0.8 " (1 slot - 4HP ) • Connector : IEC- 107 6-4 -101 (J1- J5 ) Environment a l • Operating T emperature (r equires 200 LFM airflow): 0 to 50 C • Storag e T empe[...]

  • Page 15

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 15 Installation and Initial Setup 2 This chapter provides installati on and initial setup infor mation for the switch. Inst alling the Board These instructions explain the mechanical aspects o f installing a ZT 8101 board. The board sh ould be installed in a PICMG* 2.16-c [...]

  • Page 16

    16 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Installation and Initial Setup • All LED indicators will mo mentarily blink, which repres ents a reset of the system. • The board status LED indicator will blink while the switch lo ads onboard software and performs a self-test. Af ter approximately 20 seconds, th[...]

  • Page 17

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 17 Installation and Initial Setup Statu s L E D s The two LEDs at the bo ttom of the font p anel are status LEDs. Th e top LED indicates the o verall status of the board and the bottom LED indicates the h ot swap status of the boar d. Figure 2. Front Panel[...]

  • Page 18

    18 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Installation and Initial Setup Health S tat us LED Hot S wap L ED Port LE Ds The LED array on the fron t pa nel di sp lays i nf ormati on abou t all th e Ethernet li nks on the bo ard. A green/amber two-color LED is used fo r each of th e 26 Ethernet po rt connections[...]

  • Page 19

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 19 Installation and Initial Setup Link / Speed LED Mode Gettin g S t arted with Ma nage ment The switch contains the fo llowing components : • A CPU • Memory for d ata stor age • Flash memory fo r configuration data, operational pro grams, and SNMP agent firmware. Th[...]

  • Page 20

    20 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Installation and Initial Setup The serial port on the f ront panel u ses Cisco* cable kit (Order Number: ACS-DSBUASYN). This kit includes a DB-25 terminal adapter , a DB -9 terminal adapter , and RJ-45 rollov er cable. T o build this cable, see Appendix B, “Serial C[...]

  • Page 21

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 21 Installation and Initial Setup 2. T o configure the IP add ress, use the Arro w keys or the T ab key to modify the settings in the New Switch IP Settings colum n. 3. T o con figure a name an d contact inf ormation for the switch, enter information in the follo wing fiel[...]

  • Page 22

    22 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Installation and Initial Setup 4. When the power on self test message appears, press the # key and wait for the following message: Please change your baud rate to 1 1520 0 for the Zmod em upgrad e, or press CTR L+C to go to the BO OT Menu. If you press CTRL +C, you ca[...]

  • Page 23

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 23 Switch Management and Operating Concepts 3 This chapt er describes many of the concepts y ou need to understa nd to con figure and manage the switch. It also describe s many of the features available for managing the switch. The instructions for configur ing the switch [...]

  • Page 24

    24 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts • Re se t to fact ory def a ult s —The switch includes an option that allow s you to reset th e configuration to the fact ory def aults. Y ou can select t o reset the IP addr ess or sav e your configured IP add ress. Swit[...]

  • Page 25

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 25 Switch Management and Oper ating Concepts • Back pressure —The switch fakes a collis ion and th en tran smits a jam sequence to ensure all stations are notifie d of the “collision.” This causes the s ending ports to trigger their back-of f routines and reduces t[...]

  • Page 26

    26 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts BOOTP/DHCP Relay BOOTP and DHCP allow stations to obtain boot and TCP/IP in f orm atio n dynamically . The relay agent allows them to obtain th is informatio n when the BOOTP/DH CP server i s not on the same IP interface as t[...]

  • Page 27

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 27 Switch Management and Oper ating Concepts Y ou can configure forwarding rules fo r the fol lowing: • MAC address aging • MAC address forwardi ng • IP address to a specified gateway • IP address to a specified MAC add ress MAC Address A ging Time The aging time a[...]

  • Page 28

    28 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts T raffic Control Y ou can also set thresholds for the amount of traf fic a port can handle before triggering f low control. The flow con trol th reshold s ets the l imit for the maxi mum amou nt of memo ry a por t can use to [...]

  • Page 29

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 29 Switch Management and Oper ating Concepts Priority The ZT 8101 switch allows y ou to assig n specific l evels of pr iority to traffic traversin g the switch . Setting pr iority al lows yo u to pro tect bandwid th for i mportant n odes o n your net work. T raffic in the [...]

  • Page 30

    30 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts — Destination only — Source or Destination • Ph ysic al p ort — S e t Pr iority level for all ingress frames on a physical po rt • 802.1p— 802 .1p priority b its are part of an IEEE 80 2.1Q VLAN tagged Ethernet fr[...]

  • Page 31

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 31 Switch Management and Oper ating Concepts The table can contain 3 2 entries, and two table entries are needed to configure a b i-directional filter . Port Mirroring Port mir roring allow s the traf fic o n a particul ar port to be moni tored b y sending co pies of t he [...]

  • Page 32

    32 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts • On the switch level, STP calculates the Bridge Identifier for each switch and then sets the Root Bridge and the Desig n ated Bridges. • On the port level, STP sets the R oot Port and the Desig nated Ports. The factory d[...]

  • Page 33

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 33 Switch Management and Oper ating Concepts STP Par ameters fo r the Port Level The followi ng are the user -configur able ST P parameter s for the po rt or por t gro up level . Link Aggr ega ti on The swit ch suppor ts IEEE 80 2.3ad Li nk Aggr egation which allows severa[...]

  • Page 34

    34 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts • Layer 2 MAC Des tination Address (DA) • Layer 2 MAC Sou rce Address and Dest ination Address (XO R of SA and DA) • Lay e r 3 IP So urc e Addr es s (S IP ) • Layer 3 IP Destin ation Addres s (DIP) • Layer 3 IP Sour[...]

  • Page 35

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 35 Switch Management and Oper ating Concepts VLANs VLANs allow you to group some physical ports as if they were on the same LAN. VLANs can be created either statically or dynamically: • S ta t ic VLAN —This VLAN is man uall y configured on th e switch. • Dynamic VLAN[...]

  • Page 36

    36 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts The complexity of the VLAN configurat ion is hidden. The switch applies the follo wing rules when it creates the VLAN: • T agged frames are discarde d. W ith port-based VLANs, fr ames ar e as sumed to be untag ged, so that [...]

  • Page 37

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 37 Switch Management and Oper ating Concepts Ingress Checking An ingress port is a port o n a switch where pack ets are flowing into the switch and VLAN forwarding decis ions must b e made. Packets are fo rwarded accor ding to the following rules : • If ingress check ing[...]

  • Page 38

    38 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts Even though a switch inspects a packet's IP address to determine VLAN member ship, no route calculation is performed, th e RIP protocol is not employed , and packets travers ing the switch are bridged using the Span ning[...]

  • Page 39

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 39 Switch Management and Oper ating Concepts Additional IP Interfaces T o add an IP interface to the switch, you must first con figure a VLAN and then associate an IP address (subnet mas k and gateway) with th e VLAN. These user -defined IP interfaces dif fer fr om the Sys[...]

  • Page 40

    40 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts Multicasting Multicasting is a grou p of pr otocols an d tools t hat enable a sing le source point t o send p ackets to groups of multip le destination points with persistent connections that last for some am ount of time. Th[...]

  • Page 41

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 41 Switch Management and Oper ating Concepts It provides a mechan ism that allows bridges an d end-stations to dynamically regis ter (and subsequently , de- regis ter) g rou p mem bers hip information with the MAC b ridge attached to the same LAN segment. It also provides [...]

  • Page 42

    42 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts • The second query packet will be sent after the S tartup Quer ier Interval, wh ich is one fourth of the Query Interval. By d efault, this is 31 seconds. • The next query p ackets will be sent per iodically according to t[...]

  • Page 43

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 43 Switch Management and Oper ating Concepts RIP The Rout ing Infor mation Protocol (RIP) is a dist ance-vector protocol that use s hop count as i ts criteria fo r making routin g decisions . The ZT 810 1 switch su pport s both RIP v1 and R IP v2. Y ou can configure the fo[...]

  • Page 44

    44 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Switch Management and Oper at ing Concepts[...]

  • Page 45

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 45 Using the T e lnet Console 4 Y o ur ZT 8101 switch supp orts a console manag ement interface that allows yo u to set up an d control your switch, either with an ord inary terminal (or term inal emulator) o r over a TCP/IP network using a T elnet application. This chapte[...]

  • Page 46

    46 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console network device, and can be used to intelligently allo cate bandwidth to time-critical applications such as th e integr ation of voice, video , and data on the net work. • Develop a redundancy scheme — Planning redund ant link s and routes[...]

  • Page 47

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 47 Using the T elnet Console Getting S t arted This section describ es the conventions ( function keys and entry fields) and explains how to log in to the switch for the first ti me. Console Usage Conventions Y ou can use the following function keys with the T e ln et Co n[...]

  • Page 48

    48 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console • 9,600 ba ud • 8 data bits • No p ar ity • One st op bi t • No flow cont rol See chapter 2 for instru ctio ns on logg ing in using this serial con nection. Y ou can also access the same interface with a T elnet application. Once yo[...]

  • Page 49

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 49 Using the T elnet Console • Basic Setup — Switch Information —Display information about th e switch’ s ha r dware an d firmware. — Basic Switch Setup —C onf i gu re t he sw itch ’ s IP addre ss. — Serial Port Settings —Configure the switch’ s serial [...]

  • Page 50

    50 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console — Priority Settings— Config ure swi tch traf fic p riority based on MAC ad dress , IP addres s, or Port. — Mirror ing C onf igur atio ns— Configure a sour ce port to send a copy of its data to a target port for monito ri ng and tr oub[...]

  • Page 51

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 51 Using the T elnet Console Note: Remember that APPL Y makes changes to th e switch config uration for the cu rrent session only . All changes (incl uding user add itions or u pdates) m ust be en tered into non-v olatile RA M using the Save Changes command on the Main Men[...]

  • Page 52

    52 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console T o save cha nges to NV -RAM 1. T o retain any config uration chan ges perm anently , from the Main Menu s elect Sa ve Changes and press Enter . 2. A nswer Y es to the confirmation prompt. Reboot 1. From the Main Menu, select Reb o o t and p [...]

  • Page 53

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 53 Using the T elnet Console Swit c h Inf or ma t i on The Switch Information screen disp lay s descr iptive information about the swit ch. From the Main Menu, select Switch Informat ion . This screen co ntains the following information. Basic Switch Setup Use the Basic Ne[...]

  • Page 54

    54 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 3. T o configure a name and con tact information for th e switch, enter inform ation in these fields . 4. Highlight APPL Y and press Enter . Get IP From Description The switch uses the Get IP From setting to determine where to g et its IP add[...]

  • Page 55

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 55 Using the T elnet Console Network Management Setup Y ou use the Networ k Management screens to display and modi fy para meters for the Simple Network Managem ent Prot ocol (SN MP). The switch inclu des an on-b oard SNMP ag ent that monitors the status of its h ardware, [...]

  • Page 56

    56 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 3. Highlight APPL Y and press Enter . T o configure the a ccess list Y ou can specify the IP addresses of up to three management stations that will be allowed access to the management agent of the switch . If you enter IP addresses in this fo[...]

  • Page 57

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 57 Using the T elnet Console 3. In the Co nfigure Por t field enter the port number or a rang e of ports. T o configure a singl e port, enter that port num ber in bo th the T o and Fr om field. 4. Use the spacebar to toggle thes e fields to the app ropriate value. 5. Highl[...]

  • Page 58

    58 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console T o up date firmware The switch can hold only one image of the firmware. The switch is rebooted after new firmware is downloaded . If you have any current setti ngs that you have not saved to non-volatile RAM, use the Save Chan ges option o n[...]

  • Page 59

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 59 Using the T elnet Console 3. In the PathF ilename f ield , enter the path on the TFTP server and the filename. 4. Highli ght SA VE S ETTIN G S and press Ente r . This saves the information so that the next time you access this screen , you won ’t have to enter the ad[...]

  • Page 60

    60 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 2. Configure these fields. 3. Highlight APPL Y and press Enter . 4. If you enabled BOOTP /DHCP R elay , highli ght B OOTP/DHCP Relay Interfa ce Configurat ion and press Enter . 5. T oggle the Acti on field t o Add and configure these fields. [...]

  • Page 61

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 61 Using the T elnet Console 2. Configure these f ields. 3. Highli ght APPL Y and press En ter . 4. If you enab led DNS St atic T able Lookup, hig hlight S tatic T able Conf iguration and press Enter . 5. T oggle the Actio n field to Add and configu re these fields. 6. Hig[...]

  • Page 62

    62 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console The Port Utilization screen displays these st atistics. T o view por t error s t atist ics 1. From the Main Menu, selec t Network Monitoring | Port Err or Packets and p ress Enter . 2. In the Port field, enter the po rt number to view . 3. T [...]

  • Page 63

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 63 Using the T elnet Console T o vi e w an ana lysis of packet size s and t ype s 1. From the Main Menu, select Network Monitoring | Port Packet Analysis and press Enter . 2. In the Port fie ld, enter the port nu mber to b e analyzed. 3. T oggle the Interval fiel d to susp[...]

  • Page 64

    64 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console The following infor mation is displayed for each MAC addres s. 4. T o clear all entries and force the switch to rebuild the table, highlight CLEAR ALL and press Enter . If you have select ed to br owse by port, you will have the op tion of cl[...]

  • Page 65

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 65 Using the T elnet Console T o view t he ARP t able 1. From the Main Menu, select Network Moni toring | ARP T able and press Enter . 2. Enter the IP interface nam e and the IP ad dress, highlight FI ND , and press Enter . The following informatio n is displayed in the ta[...]

  • Page 66

    66 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console The Router Port tabl e contains the VLAN name, and under t he port groupings (1 to 8, 9 to 16, 17 to 24, and 25 to 26), a p ort is assigned an “S” if the port is a s tatic router po rt, a “D” if the port has been dynamically assign ed[...]

  • Page 67

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 67 Using the T elnet Console 3. Highli ght FIND an d press Enter . The IGMP Group table con tains the fo llowing information. T o view the DVMRP routing t able Y o u can search the DVMRP routing table with an IP add ress and sub net mask combination. 1. From the Main Menu,[...]

  • Page 68

    68 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console Advanced Setup Most of the follow ing op tions can b e con fi gu red i n depen dentl y of the other op t ions . H owe ve r , you must configur e a VLAN before y ou can con figure an IP interface for it. Sp a nning T ree The Spanning T ree Pro[...]

  • Page 69

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 69 Using the T elnet Console 4. Highli ght APPL Y and press En ter . The following information is displayed about STP . T o define the port members of an STP group The switch allows you to configu re Spann ing T ree Groups that consist of a grou p of p orts that will be ha[...]

  • Page 70

    70 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 2. Configure these fields. 3. Highlight APPL Y and press Enter . The table displays this additional info rmati on about the port. Forwar ding Forwarding reduces traf fic congestion o n the network becau se packets are transmitted only to the [...]

  • Page 71

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 71 Using the T elnet Console Address is allowed to remain idl e). The aging time can be set to an y value between 300— 1,000, 000 sec onds. The d efault is 300 seconds ( 5 minut es). 3. Highli ght APPL Y and press En ter . T o configure unicast MAC ad dress forwarding Un[...]

  • Page 72

    72 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 4. T o modify an entr y , togg le the Act ion field to Add/Modify , enter the VLAN Name and MAC add ress, co nf igur e th e por ts, hi ghl i ght AP PL Y , and press Enter . 5. T o delete an entr y , toggle th e Action field to Delete , enter [...]

  • Page 73

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 73 Using the T elnet Console T o configure static IP routes 1. From the Main Menu, select Forwarding | S tatic/Default Routes and press Enter . 2. T oggle the Actio n field to Add and configu re these fields. 3. Highli ght APPL Y and press En ter . 4. T o delete a route, t[...]

  • Page 74

    74 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 3. Configure these fields. 4. Highlight APPL Y and press Enter . 5. T o remove an entry , toggle the Action f ield to Delete , enter the IP address an d the direction, highligh t APPL Y , and pr ess Enter . Priority Settings The ZT 8101 switc[...]

  • Page 75

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 75 Using the T elnet Console 4. Highli ght APPL Y and press Ente r . 5. T o delete an entry , toggle the Action field to Delete , enter the MAC add ress, highlight APPL Y , and press En ter . IP Prior it y Y o u can specify an IP address so that pack ets with this address [...]

  • Page 76

    76 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 1. From the Main Menu, selec t Priority Setting s , and pres s Enter . 2. Select Priority Based on Port , and press Enter . 3. Select and configure these fields. 4. Highlight APPL Y and press Enter . 5. T o change an entry , repeat steps 3-4.[...]

  • Page 77

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 77 Using the T elnet Console Mirrori ng Confi gurations Incoming or outgoing traff ic from any s ource por t can be mirrored for real-time an alysis. A logic analyzer or a RMON p robe can then be attached to study th e traf fic crossing the source por t in a completely uno[...]

  • Page 78

    78 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 2. Select Configure Port GMRP Settings , and press Enter . 3. Select and configure these fields: 4. Highlight APPL Y and press Enter . 5. T o change an entry , repeat steps 3-4. T o confi gure VLANs sup porting GM RP 1. From the Main Menu, se[...]

  • Page 79

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 79 Using the T elnet Console 2. T oggle the Actio n field to Add/Mo dify and configur e these fields. 3. Highli ght APPL Y and press En ter . T o create or modi fy an 802 .1Q VLA N 1. From the Main Menu, select VLAN Configurations | Configure VLAN Settings and press Enter [...]

  • Page 80

    80 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 4. Highlight APPL Y and press Enter . 5. T o enter the ch ange into non-volatile RAM, highlight Save Chan ges from the Main Menu and press En ter . T o configure the me mber por t s of an 802. 1Q VLAN 1. From the Main Menu, selec t VLAN Con f[...]

  • Page 81

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 81 Using the T elnet Console 3. Highli ght APPL Y and press Ente r . The table displays the followin g additional information. T o configure link aggregation load sharing 1. From the Main Menu, select Link Aggregation and press Enter . 2. From the Link Aggregati on Menu, s[...]

  • Page 82

    82 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console Layer 3 IP Networking This section describ es h ow to configure: • IP Interfaces • RIP • Multicast ro uting protocol s Setting Up IP Interf aces Each IP interface on the switch co rresponds to a VLAN. A VLAN, which d oes not have a corr[...]

  • Page 83

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 83 Using the T elnet Console T o configure RIP 1. From the Main Menu, select La yer 3 - IP Networki ng Setup | RIP Configu rations and press Enter . 2. Using the space bar , toggle the RIP Status field to Enab led or Di s abl ed . This function allows the RIP pro tocol to [...]

  • Page 84

    84 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 2. Configure these fields. 3. Highlight APPL Y and press Enter . Each protocol has a correspon ding configur ation screen. Y ou access these screen s from the L ayer 3 - IP N et worki ng Set up s creen. IGMP Co nfigu ration The Internet Group[...]

  • Page 85

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 85 Using the T elnet Console 2. Using the spacebar , toggle the Action field to either Add/Modify or Delete and configure these fields. 3. Highli ght APPL Y and press En ter to make the changes. These conditions af fect th e fields on the IGMP snoo ping screen: • The swi[...]

  • Page 86

    86 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console 3. Highlight APPL Y and press Enter . Note: When IGMP is enabled on an interf ace, the switch IGMP snoo ping flag is set to En abled and becomes a read-o nly parameter . DVMRP Interface Configuration The Distance V ector Mul ticast R outing P[...]

  • Page 87

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 87 Using the T elnet Console 2. Configure these f ields. 3. Highli ght APPL Y and press En ter . Stati c R o u t er P o r t A static router por t allows UDP multicast and IGMP packets to be forwa rded to a designated p ort regar dl e ss of V LAN c onf i gura tio n . A rout[...]

  • Page 88

    88 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the T elnet Console T o configure a static r outer port 1. From the Main Menu, selec t Layer 3 - IP Networking Setup | S tatic Router Port Settings and press Enter . 2. T oggle the Acti on field t o Add/Modify and configure these fields. 3. Highlight APPL Y and [...]

  • Page 89

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 89 Using the W e b Console 5 The ZT 8101 switc h has an embe dded W eb server that allow s you to manage t he switch fro m anywhere on t he network through a standard br owse r such as Nets cape* Navi gator or Micro soft* Internet Explorer . The W eb browser communicates d[...]

  • Page 90

    90 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the Web Console • Develop a policy scheme— Some subnets will have a greater need for multicasting bandwidth, for ex ample. A policy is a mec hanism to alter the no rmal packet forwardin g in a network device, and can be used to intelligently allo cate bandwi[...]

  • Page 91

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 91 Using the Web Console Getting S t arted The first step required to use the W eb Console for the f irst time is to secur e a browser s uch as Netscape Navigat or or Micr osoft Int ernet Expl orer . The second step is to configure th e IP address of the switch. This must [...]

  • Page 92

    92 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the Web Console The left panel has these optio ns: • Basic S etup — Switch Information —Display information about the switch’ s hardware, firmware, and protocol configu ration. — Basic Switch Setup —Configu re the swi tch’ s IP address. Figure 4. W[...]

  • Page 93

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 93 Using the Web Console — Serial Port Settings —Configure the switch’ s serial port that is used for terminal ses sions. — Port Configura t ion s —Enable/disabl e indivi dual por ts and set their speed and dupl ex state. — User Accounts —Set up user accounts[...]

  • Page 94

    94 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the Web Console Admin and User Privileges There are two levels of user privileges: Admin and User . Some menu selections available to user s with Admin privileg es are not be available to those with User p rivileges. The table summarizes the Admin and User privi[...]

  • Page 95

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 95 Using the Web Console Rest art 1. T o restart the switch , in the left pane l click Reb oo t . 2. Click Ye s to save the current switch configuration to non-volatile R AM (flash RAM), or No if you want t o restar t the switch using the last- saved (p revious) configur a[...]

  • Page 96

    96 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the Web Console Switch I nfor mation The Switch Information s creen displays des criptive infor mation about the s witch. In the left panel, click Switch Information . This screen contains the following information. Basic Switch Setup Use the Basic Switch Setu p[...]

  • Page 97

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 97 Using the Web Console 3. T o configure a name and contact info rmation for the s witch, enter info rmation in these fields . 4. Click Apply . Get IP F rom Descr iption The switch uses the Get IP From setting to dete rmine wher e to get its IP address. Y ou must use the [...]

  • Page 98

    98 Intel® Net Structure ™ ZT 81 01 10/ 100 Ethe rnet Switc h User ’s Man ual Using the Web Console Serial Port Settings The Serial Port Settings screen allows the configuration of the switch's serial port, which is on the front panel. T erminals m ust match these settings to connect to the switch. 1. In the left panel, click Seri al Port [...]

  • Page 99

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 99 Using the Web Console Network Management Y ou use the Networ k Management screens to display and modi fy para meters for the Simple Network Managem ent Prot ocol (SN MP). The switch incl udes an o n-board S NMP agent which monitors the status of its h ardware, as well a[...]

  • Page 100

    100 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o configure management st ation IP addresses Y ou can specify the IP addresses of up to three management stations that will be allowed access to the management agent of the switch . If you enter IP addresses in this form , on ly the m anagem ent st[...]

  • Page 101

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 101 Using the Web Console When the download is complet e d, the switch autom atically reboots and executes the new runtim e firmware. Note: If FLASH becomes corrupted because you lose power when upg rading the firmware, you must use Zmodem to fix the problem. See “Upg ra[...]

  • Page 102

    102 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o test connectivity with ping 1. In the left panel , select Switch Utilities. 2. In the top panel under O thers, cli ck Ping T est . 3. Configure these fields. 4. T o start the test, click St a r t . A window appears to display the resu lts of the [...]

  • Page 103

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 103 Using the Web Console 4. Click Apply . T o conf igure the static BOOTP r elay s etup Y o u must configure the BOOTP/DCHP relay agent so that it knows the server s’ IP addresses and subnet names (IP in terface names). 1. In the left panel, click Switch Utilit ies . 2.[...]

  • Page 104

    104 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o configure DNS Relay 1. In the left panel, click Switch Utilitie s. 2. In the top panel under O thers, cli ck DNS Relay . 3. Configure these fields. 4. Click Apply . T o configure the static DNS t able The DNS table specifies where the DNS servers[...]

  • Page 105

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 105 Using the Web Console Port St atistics T o view port utiliza tion 1. In the left panel, click Network Monitori ng. 2. In the top panel under Statistics, click Port Utilization . 3. T o change the refresh i nterval, se lect a value f rom the dr op-down menu. 4. T o clea[...]

  • Page 106

    106 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o view an a nalysis of p ack et si zes and type s 1. In the left panel, click Network Monitoring . 2. In the top panel under S tat istics, click Port Packet Analysis. 3. In the Port field, select the port to view . 4. I n the Interval field, select[...]

  • Page 107

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 107 Using the Web Console Address T ables T o view t he MAC addre ss t able 1. In the left panel, click Network Monitori ng. 2. In the top panel und er T ables, click MAC Addr ess T able. 3. Select how you want to view the MAC ad dresses: — Search T able By VLAN— Allow[...]

  • Page 108

    108 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o view the routing t able 1. In the left panel, click Network Monitoring . 2. In the top panel under T ables, click Routing T able. 3. I n the entr y bo xes, enter the following informatio n T o find all known r outes, en ter 0.0.0.0 for all the ad[...]

  • Page 109

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 109 Using the Web Console Statu s T o view GVRP St atus 1. In the left panel, click Network Monitori ng. 2. In the top panel und er St atus, cli ck GVRP S tatus. The screen contains this information. If more than one IEEE 802.1Q VLAN has been defined for the switch, click [...]

  • Page 110

    110 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 2. In the top panel under S tat us, click IGMP Sn oo pin g S tatus. 3. In the VLAN Name field, enter the name of the VLAN to retrieve IGMP snooping informati on. 4. Click Find. The table displays this information. T o view the IP multicast forwar din[...]

  • Page 111

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 111 Using the Web Console 5. Click Find . The table displays this inf ormatio n. T o view the DVMRP routing t able Y o u can search the DVMRP routing table with an IP add ress and sub net mask combination. 1. In the left panel, click Network Monitori ng. 2. In the top pane[...]

  • Page 112

    112 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console Advanced Setup Most of the follow ing op tions can b e con fi gu red i n depen dentl y of the other op t ions . H owe ve r , you must configur e a VLAN before y ou can con figure an IP interface for it. Sp anning T ree Protocol The Spanning T ree Pro[...]

  • Page 113

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 113 Using the Web Console 5. Click Apply . The following information is displayed about STP . T o define the port members of an STP group The switch allows you to configu re Spann ing T ree Groups that consist of a grou p of p orts that will be handled as though they we re[...]

  • Page 114

    114 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 3. Configure these fields. 4. Click Apply . The Status field displays whether the port is Disabled or Forwarding. The STP Name field displays the assi gned STP group name for the port. Forwar ding Forwarding reduces traf fic congestion o n the networ[...]

  • Page 115

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 115 Using the Web Console 2. Click Ne w and config ure these fields. 3. Click Apply . 4. T o remove an entry for the Entries lis t, select th e entry and click Del et e . T o configure multicast MAC address forwarding The multicast MAC address s ettings configur e the swit[...]

  • Page 116

    116 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 3. Configure these following f ields for each po rt group . 4. Click Apply . T o configure advanced traffic control Advance traf fic control sets th e threshold for the am ount of tr affic a port can hand le before triggering fl ow control. Y ou must[...]

  • Page 117

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 117 Using the Web Console 4. Click Apply . 5. T o delete a route, s elect the entry in the static/defau lt route table and click Delete . T o config ure st atic ARP The ARP table maps an IP add ress to a device’ s MAC address. 1. In the left panel, click Fo rwa rd in g .[...]

  • Page 118

    118 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 3. Click Apply . The entry is added to th e table. 4. T o remove an entry , select the entry in the table and click Rem ove . Priority Settings The ZT 8101 switch allows you to assign specific levels of priority to traffic tr aversing the switch. Set[...]

  • Page 119

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 119 Using the Web Console 4. Click Apply . 5. T o remove an entr y , select the entry in the tabl e and click Delete . IP Priority Y o u can specify an IP address so that pack ets with this address are g iven special handling, either a higher or lower priority than normal [...]

  • Page 120

    120 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 1. In the left panel, click Priority Settings. 2. In the top panel , click Priority Based on Po rt. 3. Click New an d configure these fields . 4. Click Apply . 5. T o change an entry , repeat steps 3-4. User Priority Regeneration Y ou can enable User[...]

  • Page 121

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 121 Using the Web Console Mirrori ng Confi gurations Incoming or outgo ing tr aff ic from any source por t can be mirrored for realt ime analysi s. A logic analyzer or a RMON p robe can then be attached to study th e traf fic crossing the source por t in a complete ly unob[...]

  • Page 122

    122 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o configure a port-based VLAN Ports must be removed from an other VLAN befor e they are available for assignin g as static members of a port-based VLAN. 1. In the left panel, click VLAN Configurations . 2. In the top panel , click Port-Based VLANs [...]

  • Page 123

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 123 Using the Web Console T o configure me mber por t s of an 802. 1Q VLAN 1. In the left panel, click VLAN C onfigurations . 2. I n th e top p ane l, c l ic k IEEE 802.1 Q Port S ettings . 3. For each port, ena ble or disable the f ollowing: 4. Click Apply . GMRP GMRP (Gr[...]

  • Page 124

    124 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 3. Select and configure these fields: 4. Click Apply . 5. T o change an entry , repeat steps 3-4. Li nk Ag gre gat io n Link aggregation allows se veral ports to be gro uped together so th at they can act as a si ngle port. This is done to eith er in[...]

  • Page 125

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 125 Using the Web Console T o configu re li nk agg reg ation lo ad shari ng 1. In the left panel, click Link A gg re gati on S ett ing s . 2. I n th e top p ane l, c l ic k Load Sha ring Al gorithm . 3. Select a load sharing algorithm from the f ollowing: 4. Click Apply La[...]

  • Page 126

    126 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console T o set up IP interfac es on the sw itch 1. In the left panel, click Layer 3 IP Ne tworking . 2. In the top panel under IP Inter face Settings, click IP I nterface Settings . 3. Click New an d configure thes e fields. 4. Click Apply . 5. T o delete a[...]

  • Page 127

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 127 Using the Web Console 4. Configure these f ields. 5. Click Apply . Multicast Global Configurations The Multicast Global Configurations screen is only for glob ally enabling or disab ling the multicast routing protoc ols on the switch. Each VLAN o r IP Interface uses th[...]

  • Page 128

    128 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console IGMP Co nfigu ration s The Internet Group Management Pro tocol ( I GMP) allo ws the switch to forward multicast tr affic intelligently on the switch . The switch “snoops ” the IRMP query and rep ort messages and for wards traffic only to the por [...]

  • Page 129

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 129 Using the Web Console T o configure IG MP for an I P interface 1. In the left panel, click Layer 3 IP Networking . 2. In th e top panel u nder IP Mult icast Routing P rotocols, click IGMP Interface Configurations . 3. Select an interface and click Ed it . 4. Configure [...]

  • Page 130

    130 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console 5. Click Apply . PIM-DM Setup The Protoco l Independent Multi cast - Dense Mode (PIM-DM) pr otocol shoul d be used in networks with a low delay (low latency) and hig h bandwidth becau se PIM-DM is optimized to guaran tee delivery of multicast packets[...]

  • Page 131

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 131 Using the Web Console • All IGMP report packets will be forwarded to the router port. • IGMP queri es (fro m the router port) will be flooded to all po rts. • All UDP multicast packets will be forwarded to the router port. Because routers do not send IGMP reports[...]

  • Page 132

    132 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Using the Web Console[...]

  • Page 133

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 133 Agency Approvals A CE Certification The ZT 8101 meets th e intent of D irective 89/336/EEC for Electromagnetic Compatib ility & Low- V oltage D irective 73/ 23/EEC for P roduct Sa fety . The ZT 8101 has b een designed fo r NEBS/ETSI compliance. Safe ty Emissi ons T[...]

  • Page 134

    134 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Agency Approvals Regulatory Informa tion FCC—Federal Communications Commission (USA) This product has been tested and f ound to comp ly wi th the lim its for a Class A digital device pursuant to Part 15 of the FCC rules. These lim its are designed to provide reas onable[...]

  • Page 135

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 135 Agency Approval s Safety Info rmation AC and/or DC Power Safety W arning (AC and/or DC P owered Unit s) The AC and/or DC Pow er cord i s your unit's main AC and /or DC disco nnecting dev ice, and must be ea sily ac cessibl e at all times . Au xiliary AC and/or DC [...]

  • Page 136

    136 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Agency Approvals T o reduce the pos si bil ity of e lec tri c s hoc k from a te lepho ne o r Ethe rnet sy ste m, plu g y our e nc los ure into the po wer sou rce bef ore mak ing th ese con nect s. Dis connect these conne ctions before unpluggin g you r enclo sure fr om th[...]

  • Page 137

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 137 Agency Approval s warrants the repaired or replaced product to be free from defects in material and workmanship for a period of the g reat er o f: ( i) n inet y ( 90) day s fro m t h e ret u rn sh ip ping dat e; or (i i) t h e per i od of time remaining on t he origin [...]

  • Page 138

    138 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Agency Approvals For IJKK Return Material Auth orizatio n (RMA) requests e-m ail address: rma.cen ter .jpss@intel.com T elephon e No.: 81-298-47-09 93 or 81-298-47 -54 17 Fax No.: 81-298-47- 4264 Direct Return Au th orization (DRA) for rep air requests, cont act the JPSS [...]

  • Page 139

    Intel® NetStruct ure™ Z T 8101 10/ 100 Ethe rnet Switc h User’s Manu al 139 Serial Cable B The serial port on the fr ont panel of the ZT 81 01 switch requires a s erial cable to connect the switch to a term inal or a PC runnin g terminal em ulation so ftware. This RJ-45 to DB-9 co nversion cable is a standard Ethernet cable with the serial sig[...]

  • Page 140

    140 Intel® NetStru cture™ ZT 8101 10/100 Ethern et Switch Use r’s Manual Seria l Cable B.2 Building the Cable The serial cable allows you to manage the swit ch from the serial port on the front panel. T o build this cable, use a RJ-45 connector for th e switch, a DB-9 connector for the termin al, and the following diagram as a guide for the wi[...]