Honeywell 800-04410 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Honeywell 800-04410, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Honeywell 800-04410 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Honeywell 800-04410. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Honeywell 800-04410 should contain:
- informations concerning technical data of Honeywell 800-04410
- name of the manufacturer and a year of construction of the Honeywell 800-04410 item
- rules of operation, control and maintenance of the Honeywell 800-04410 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Honeywell 800-04410 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Honeywell 800-04410, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Honeywell service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Honeywell 800-04410.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Honeywell 800-04410 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    April 2009 © 2009 Honeywe ll. All rights reserved. 800-04410, Revision A NetAXS™ Access Control Unit User ’ s Guide If this p anel is to be added to an existing loop, then all p anels need to be upgraded. Please see www .honeywellaccess.com.[...]

  • Page 2

    Copyright© 2009 Honeywell. All right s reserved. All product and brand names are the service ma rks, trademarks, registe red trademarks, or registered service marks of their respec tive owners. Printed in the United S tates of America. Honeywell reserves th e right to change an y inform ation in this document at any time without prior notice. Micr[...]

  • Page 3

    NetAXS™ Access Control Unit User’s Guide , Document 800-04410, Revision A iii C ONTENT S What’s New in Release 3.1.8 Dynamic Screens and Performance Enhancements ............. ................... ....................... .............. ix Multi-languag e Support .............. .................... ....................... .................... .[...]

  • Page 4

    iv www.honeywell.com 2.7 Configuring Other I/O & Grou ps Tab ........................ .................... ...................... ................... 52 2.7.1 Inputs Tab .................................... ............................... .................................... ....... 52 2.7.2 Outputs Tab ................... .....................[...]

  • Page 5

    NetAXS™ Access Control Unit User’s Guide , Document 800-04410, Revision A v L IST OF F IGURES Figure 1-1: NetAXS™ Web Server Hub Connection ........................ .................................... .... 2 Figure 1-2: NetAXS™ Web Server Direct Connection ................................... .......................... 3 Figure 2-1: NetAXS?[...]

  • Page 6

    vi www.honeywell.com Figure 4-6: Status > Outputs > Doors/Aux/Other/DnStr Tab ..................... ............................. 85 Figure 4-7: Status > Outputs > Groups Tab ..................... .................................... .................... 86 Figure 4-8: Status > System ................................ ................[...]

  • Page 7

    NetAXS™ Access Control Unit User’s Guide , Document 800-04410, Revision A vii L IST OF T ABLES Table 1-1: Reading the Select Panel ....................... .................................... ............................. .... 7 Table 2-1: Configuration > System > Hos t/Loop Communications Ta b Field Descriptions ..... 12 Table 2-2: Confi[...]

  • Page 8

    viii www.honeywell.com[...]

  • Page 9

    NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A ix What’ s New in Release 3.1.8 Dynamic Screens and Performance Enhancement s Dynamic screens are screens that can refre sh data without re-submitting. In the Honeywell NetAXS™ panel, there is now a persistent connection between the web screens and the panel. This al[...]

  • Page 10

    x www .honeywell.com CSV Reports and Card Upgrade CSV Report s and Card Upgrade A requested feature was added to the NetAXS™ panel to support card holder updates and additions to the database via a CSV (comma separa ted variable) file. In order to su pport this, a CSV report is first created via a request from the web page. This report can be edi[...]

  • Page 11

    NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 1 1 Connecting to the W eb Server In this chapter ... 1.1 Overview A NetAXS™ access control site is configur ed with a host system and NetAXS™ access control units that ex ceed existing N-1000-III/IV , Pr o Series specifications and approvals, and that commun icate w[...]

  • Page 12

    2 www .hon eywell.com Connecting to the Web S erver Connecting to the Web Server 1.2 Connecting to the W eb Server This section describes how to connect a computer to the NetAXS™ web se rver via Ethernet and Internet Explorer . Notes: • The NetAXS™ panel that you are connecting to th e computer is the Gateway panel. DIP switc h 6 on a Gateway[...]

  • Page 13

    Connecting to the We b Server Connecting to the Web Server NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 3 Figur e 1-2: NetAXS™ W eb Server Dir ect Connection 2. Configure the computer ’ s n etwork connection: a. Select Start > Setti ngs > Control Panel . b. Click Network and Dial-up Connect ions . T ermin[...]

  • Page 14

    4 www .hon eywell.com Connecting to the Web S erver Connecting to the Web Server c. Identify your local Ethernet connectio n (commonly labe led Local Area Connection ), and right click the icon to display the Lo cal Area Connection Properties screen. d. Highlight the Internet Pr otocol (TCP/IP) connection. e. Click Properties to display your system[...]

  • Page 15

    Connecting to the We b Server Connecting to the Web Server NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 5 j. Click OK to accept the entries. 3. Open your browser (Internet Explorer shown below), and ente r https://192.168.1.150 as the target address.[...]

  • Page 16

    6 www .hon eywell.com Connecting to the Web S erver Connecting to the Web Server 4. Press the Enter key to display the Honeywell NetAXS™ login screen. Note: If you are using Microsoft Internet E xplorer 7, and you receive a certificate error message, follow these steps to clear it: a. Enter the IP Address of the panel into the URL box. b. Click C[...]

  • Page 17

    Connecting to the We b Server Reading th e Select Panel NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 7 1.3 Reading the Select Panel The Select Panel is located at the right margin of the NetAXS™ web server main screen, shown in the preceding section. The presence of a number in on e of the Select Panel cells indi[...]

  • Page 18

    8 www .hon eywell.com Connecting to the Web S erver Reading the Select Panel Large white number on blue background, such as “2” in the example below: Panel 2 is selected, and it has no unacknowledged alarms. Small white number on a red background, su ch as “1” in the example below: Panel 1 is not selected, but it does have unacknowledged al[...]

  • Page 19

    NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 9 2 Configuring via the W eb Server In this chapter ... Overview 10 Configuring the System 1 1 Configuring the Doors 31 Configuring Other I/O & Groups T ab 52 Configuring Interlocks 59 Configuring T ime Management 24 Configuring Access Levels 45 Configuring Users 61[...]

  • Page 20

    10 www .hon eywell.com Configuring via the We b Server Configuring the System 2.1 Overview This chapter explains the NetAXS™ configura tion functions as accessed via the NetAXS™ web server . These functions should be performed only by th e NetAXS™ system administrator or service personnel. Caution: The sequence of NetAXS™ configuration task[...]

  • Page 21

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 11 2.2 Configuring the System 2.2.1 Host/Loop Communications T ab In order to maintain your NetAXS™ system configurat ion or to monitor its status, you must conn ect to the NetAXS™ panel by using one of two modes[...]

  • Page 22

    12 www .hon eywell.com Configuring via the We b Server Configuring the System The Host/Loop Communications t ab enables you to: • Configure the following host settings: – Connection type (host or web server) – Communications type –B a u d r a t e – Port number – T ime sync • Configure the loop baud rate for co mmunicatio n among downs[...]

  • Page 23

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 13 Baud Rate Specifies the transmission rate (bits per second) between the host and the panel. Select the highest rate t hat your modem will support (19,200 bps is reco mmended). Port Number Specifies the port number[...]

  • Page 24

    14 www .hon eywell.com Configuring via the We b Server Configuring the System 2.2.2 General T ab Click Configurat ion > System in the NetAXS™ menu to display the System Configuration (General) screen: Figure 2-3: Configuration > System > General T ab The General T ab enables you to: • Set the general configuration settings. • Reset t[...]

  • Page 25

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 15 Boot T ime Displays the time that power was applied to the Ne tAXS™ panel. Reset Reboots the panel. A reset does not change the current configuration in the database. Anti-Passback Enabled – Enables anti-passb[...]

  • Page 26

    16 www .hon eywell.com Configuring via the We b Server Configuring the System Duress Detect Enabled – Enables the user to trigge r an alarm or output device in times of duress, such as when the operator is forced to grant access against his will to an unauthorized person. This feature is available only when the reader is configured with a “Card[...]

  • Page 27

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 17 2.2.3 File Management T ab Firmware is software that is embedded in the NetAXS™ board. The firmware provides this web interface and all access cont rol functionality . Periodically , the firmware is updated. Thi[...]

  • Page 28

    18 www .hon eywell.com Configuring via the We b Server Configuring the System Step s to reset the firmware ver sion: 1. In the Active Image column, clic k to select the firmware version to which you want to revert. The prompt “Switching to an alternate fi rmware set requires a panel reboot” appears. 2. Click OK to reboot the panel. Step s to re[...]

  • Page 29

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 19 Step s to do wnload a c ard database report (.CSV file) from the host system to the panel: 1. Click Brows e to lo cate the . CSV file. 2. Click Downlo ad to download the file. If the file is in the correct report [...]

  • Page 30

    20 www .hon eywell.com Configuring via the We b Server Configuring the System 2.2.4 Network T ab Y our NetAXS™ panel is physically configured in one of a number of possible network configurations. See the “System Configur ation” section in the NetAXS™ NX4L1 Installation Guide, NetAXS™ NX4S1 Installation Guide, and NetAXS™ NX4S2 Installa[...]

  • Page 31

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 21 2.2.5 Site Codes T ab Site codes identify an enterprise’ s site. Y ou ca n create a maximum of eight site codes to serve as secondary IDs (in addition to the card nu mber) on the card for additional validation. [...]

  • Page 32

    22 www .hon eywell.com Configuring via the We b Server Configuring the System 2. Click Modify to display the Name an d Site Code fields. 3. Modify the na me or site code number as you desire, and click Modi fy again. Step s to delete a site code : 1. In the Num column, click the number of the site you want to delete. 2. Click Delete to di splay a p[...]

  • Page 33

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 23 2.2.6 Downstream Devices T ab The NetAXS™ downstream devices provide the NetA XS™ panel with additiona l inputs and outputs. The NetAXS™ panel supports two down stream board types: • NX4IN—Provides 32 su[...]

  • Page 34

    24 www .hon eywell.com Configuring via the We b Server Configuring the System 2.3 Configuring T ime Management This set of time-relate d functions includ es: • Setting the current time by which the panel will function. • Creating the time zones by which the panel will control the operation of the inputs, outputs, groups, readers, access levels,[...]

  • Page 35

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 25 Ste ps : Use the descriptions in the following table to configure the time settings: T able 2-3: Configuration > T ime Management T ab Field Descriptions Setting Description Current loop time Displays by defaul[...]

  • Page 36

    26 www .hon eywell.com Configuring via the We b Server Configuring the System 2.3.2 T im e Zones T ab The NetAXS™ panel controls access by using time zo nes, or time schedules. Inputs, outputs, groups, readers, access levels, a nd cards through access levels are all conf igured with time zones by which they will be energized or de-ener gized, ena[...]

  • Page 37

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 27 4. If the time zone will be linked to another time zone, select the “linked to” time zone’ s number from the drop down list. Caution: W e recommend that you read the explan ation of time zone linking below ([...]

  • Page 38

    28 www .hon eywell.com Configuring via the We b Server Configuring the System Note: T ime Zone 1 is reserved as a default with a time range of 24 hours, seven days a week . So, we need to add three time zone s to the panel. Then, with the Link T ime Zone feature, you can link them so that they all work together: 1. Add T ime Zon e 2 and select Mond[...]

  • Page 39

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 29 2.3.3 Holidays T ab Holidays are days when no work is scheduled at the facility . The se holidays are used in time zone configuration (see “ Ti m e Z o n e s T a b “ on page 26). Click the Holidays tab: Figure[...]

  • Page 40

    30 www .hon eywell.com Configuring via the We b Server Configuring the System While Annual is selected, the Y ear box is grayed out. The NX4 can suppor t three different Holiday T ypes (T ype 1, T ype 2, and T ype 3), but a user can on ly select one type per day . Also of no te, a single calendar day cannot be set for m ore than one type of Holiday[...]

  • Page 41

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 31 2.4 Configuring the Doors Each NetAXS™ panel supports four doors. For each door , you must configure the read ers, inputs, and outputs. At Configuration > Doors in the task menu at the left mar gin of the Net[...]

  • Page 42

    32 www .hon eywell.com Configuring via the We b Server Configuring the System • Define the time zone during which the reader will be in lockdown mode (see Time Zones T ab , page 26 for details about setting time zones). When the reader is in lockdown m ode, entry is prevented but egress is still allowed. • Define the reader ’ s access mode (t[...]

  • Page 43

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 33 Ste ps : 1. Use the descriptions in the table below to configure the General reader settings. T able 2-4: Configuration > Doors > Rea der T ab Descriptions Setting Description Access Mode Specifies the valid[...]

  • Page 44

    34 www .hon eywell.com Configuring via the We b Server Configuring the System 2. Click Card Fo rmats at the side of the tab. A card form at tells the panel how the card number will be read. The panel supplies the format to the card reader s. Then, the card readers can correctly read the card. Anti-Passback Configures the anti-passback feature, wh i[...]

  • Page 45

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 35 Figure 2-12: Configuration > Doors > Reade r > Car d Formats T ab 3. Click to highlight each desired card format liste d in the A vailable box, and click the green right arrow button to move the format(s)[...]

  • Page 46

    36 www .hon eywell.com Configuring via the We b Server Configuring the System Concatenated Site Code Combines the Site Code and Card ID as one unique num ber . T otal Num Bits Lists the total number of bits on the card. Even Parity Lists where on the card th at even parity is being observed. Star t B i t – first bit in the card wh ere even parity[...]

  • Page 47

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 37 6. If you want to change an existing card format’ s data layout, do uble-click the format’ s name on the list of existing formats to di splay the Card Format Data Layout scre en. Use the descriptions in the ta[...]

  • Page 48

    38 www .hon eywell.com Configuring via the We b Server Configuring the System 2.4.2 Output s T ab An output, or ou tput relay , is a switch on the panel that either energizes or de-ener gizes or pulses an output device, such as a door lock or an LED. For example, a successf ul card read at a reader (input device) causes the output relay switch on t[...]

  • Page 49

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 39 the group configuration from this screen. T o edit the Group configuration, click Config uration > Other I/O & Group s in the side panel. Figure 2-14: Configuration > Doors > Outputs > Gr oup T ab [...]

  • Page 50

    40 www .hon eywell.com Configuring via the We b Server Configuring the System The LED Reader dialog box enables you to configure the Rea der LED: The Output s t ab enables you to: • Configure the following for each of th e door ’ s output locks and reader LEDs: –N a m e – Pulse time – T ime zones – Latching –I n t e r l o c k – T im[...]

  • Page 51

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 41 Ste ps : Use the descriptions in the following table to configure each individual lock or Reader LED: T able 2-6: Configuration > Doors > Output T ab Field Descriptions Setting Description Name Enter a uniqu[...]

  • Page 52

    42 www .hon eywell.com Configuring via the We b Server Configuring the System 2.4.3 Input s T ab Three inputs are associated with each of the four doors on a NetAXS™ p anel: • Stat us – Provides the following door status information: • Egress – Allows the door to open or cl ose normally without generating an alarm. • T amper – Reports[...]

  • Page 53

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 43 The Input s t ab enables you to: • Define the Status, Egress, and T amper inputs’ access modes. • Specify the Status, Egress, and T amper shunt time, or the period of time the d oor ’ s normal state will b[...]

  • Page 54

    44 www .hon eywell.com Configuring via the We b Server Configuring the System Ste ps : Use the descriptions in the table below to configure the Status, Egress, and T amper inputs, the n click Submit Change s : T able 2-7: Configuration > Doors > In puts T ab Field Descriptions Setting Description Mode Normally Closed – Specifies that the do[...]

  • Page 55

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 45 2.5 Configuring Access Levels Every card is assigned an access level. The access level spe cifies the time zone, or time schedule, during which the card holder can be granted access at a specific door . For exampl[...]

  • Page 56

    46 www .hon eywell.com Configuring via the We b Server Configuring the System Step s to create an access level : 1. Select the door(s). The access level will allo w access only at the door(s) you select here. 2. Enter the name of the access level in the Nam e field. This should be a unique name th at identifies the general user group. 3. Select the[...]

  • Page 57

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 47 2.6 Maint aining Cards A card is encoded with a unique number and th e card holder ’ s rights to access NetAXS™ system resources. For example, in additio n to its unique number , a card wo uld allow the card h[...]

  • Page 58

    48 www .hon eywell.com Configuring via the We b Server Configuring the System – Use limits – Card holder note 1 – Card holder note 2 – Access levels Ste ps : Use the field descriptions in the following table to complete the card fields and click Add Card(s) : T able 2-8: Car ds > Add Car ds Field D escriptions Field Description Card Numb[...]

  • Page 59

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 49 2.6.2 Displaying and Modifying Cards Use this function to display sp ecified cards and modify them. Click Cards > Card Dat a to display the search scre en with which you can find and display specified cards. Fi[...]

  • Page 60

    50 www .hon eywell.com Configuring via the We b Server Configuring the System 2.6.3 Deleting Cards Click Cards > Delete Card(s) to display the Delete Cards screen: Figure 2-19: Car ds > Delete Car ds The Delete Card(s) screen enables y ou to: • Delete cards retrieved by any of th e following keys: – Card number – Range of card numbers ?[...]

  • Page 61

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 51 2.6.4 Displaying Report s Use this function to displa y a report of all cards and card data. Y ou can display the cards either by the cardholder ’ s last name or by the card number . Click Cards > Reports to [...]

  • Page 62

    52 www .hon eywell.com Configuring via the We b Server Configuring the System 2.7 Configuring Ot her I/O & Group s T ab The NetAXS™ panel provides up to 14 inputs and eight outputs. T wo of the inputs and four of the outputs are “other” inputs and outputs, because you can use them for other than door lock/unlock functions. This section ex[...]

  • Page 63

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 53 Click Input s to display the Inputs screen: Figure 2-20: Configuration > Other I/O & Gr oups > Inputs T ab The Input t ab enables you to: • Configure the mode, deboun ce time, and time zones for anothe[...]

  • Page 64

    54 www .hon eywell.com Configuring via the We b Server Configuring the System Ste ps : Use the descriptions in the following table to configure other panel inputs and downstream inputs: T able 2-10: Configuration > Other I/O & Gr oups > In puts T ab Field Descriptions Setting Description Name Enter a unique name to identify the device. Mo[...]

  • Page 65

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 55 2.7.2 Output s T ab This tab enables you to configure the four NetAXS™ auxiliary outputs (outputs 5-8) that are physically located on the panel board, and the outp uts on downs tream NX4OUT bo ards daisy-chained[...]

  • Page 66

    56 www .hon eywell.com Configuring via the We b Server Configuring the System Ste ps : Use the descriptions in the following table to configure each output device: T able 2-1 1: Configuration > Other I/O & Gr oups > Outputs T ab > Fields Setting Description Name Enter a unique name to identify the device. Pulse T ime Specifies the dura[...]

  • Page 67

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 57 2.7.3 Group s T ab This tab enables you to configu re outputs in groups. For example, you might want a group of horns in your facility to sound for the same duration or t o be enabled or disabled according to the [...]

  • Page 68

    58 www .hon eywell.com Configuring via the We b Server Configuring the System Ste ps : Use the descriptions in the followi ng table to configure each group: T able 2-12: Configuration > Other I/O & Gr oup s > Gr oups T ab Field Descriptions Setting Description Name Enter a unique name to identify the group. Pulse T ime Specifies the durat[...]

  • Page 69

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 59 2.8 Configuring Interlocks An interlock is a programmed co nnection between two points. The in terlock causes an input point, output point, or group of output points to act in a specified manner when an other inpu[...]

  • Page 70

    60 www .hon eywell.com Configuring via the We b Server Configuring the System Step s to create an interlock : 1. Click the New Interlock button to display the screen. 2. Use the descriptions in the followi ng table to configure the interlock: 3. Click the Add Interlock button to create the interlock. Step s to modify an interlock : 1. In the Int Lk[...]

  • Page 71

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 61 Step s to enable/disable an in terlock : 1. T o enable an interlock, click the Enable button. 2. T o disable an interlock, click the Disable button. 2.9 Configuring Users A user is one who will be using the NetAXS[...]

  • Page 72

    62 www .hon eywell.com Configuring via the We b Server Configuring the System .Click Users to display the User Configuration screen: Figure 2-24: Configuration > Users The User Configuration screen enables y ou to: • Create a user . • Modify a user . • Delet e a user . • Enable and disable a user account. • V iew the user ’ s current[...]

  • Page 73

    Configuring via the Web Serv er Configuring the System NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 63 5. Select the Account Status: – Enabled – Activates the user account (the user can log in). – Disabled – De-activates the user a ccount (the user cannot log in). 6. Select the user ’ s Language Prefe ren[...]

  • Page 74

    64 www .hon eywell.com Configuring via the We b Server Configuring the System[...]

  • Page 75

    NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 65 3 Configuring via WIN-P AK In this chapter ... 3.1 Overview This chapter explains the NetAXS™ conf iguration functions as accessed via the Quick Start W izard (QSW) in WIN-P AK 2005, WIN-P AK PRO 2005, WIN-P AK SE, and WIN-P AK PE. The QSW creates the AD V options a[...]

  • Page 76

    66 www .hon eywell.com Configuring via WIN-PAK Adding a New NetAXS™ Panel The NetAXS™ Gateway pane l’ s baud rate is se t configured via the NetAXS™ web se rver (see the NetAXS™ Access Contr ol Unit Installation Guide for instructions). When you set the Loop T ype in the QS W to 485 ACK-NAK, you define th e baud rate to be 19.2 kilobits p[...]

  • Page 77

    Configurin g via WIN-PAK Adding a New NetAXS™ Panel NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 67 3.2.2 Configuring the Panel Manually Use the WIN-P AK Panel Configuration screen to complete the NetAXS™ panel configuration manually . All of the configuratio n screen options are supporte d for NetAXS™ panel [...]

  • Page 78

    68 www .hon eywell.com Configuring via WIN-PAK Adding a New NetAXS™ Panel 3. Add the ADV . 4. Click OK . 5. Display and complete the Card Format tab: Figure 3-3: WIN-P AK Panel Configuration Screen - Card Fo rmat T ab[...]

  • Page 79

    Configurin g via WIN-PAK Adding a New NetAXS™ Panel NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 69 6. Display and complete the T ime Zones tab: Figure 3-4: WIN-P AK Panel Configuration Screen - T ime Zones T ab Note: All T ime Zones and Holidays are supported for a NetAXS™ panel.[...]

  • Page 80

    70 www .hon eywell.com Configuring via WIN-PAK Adding a New NetAXS™ Panel 7. Display and complete the Options tab: Figure 3-5: WIN-P AK Panel Configuration Screen - Options T ab Notes: • All options are supported for a NetAXS™ pane l except the Advance d U option. When using Groups, you must select bo th AEP boards in the Hard ware Options bo[...]

  • Page 81

    Configurin g via WIN-PAK Adding a New NetAXS™ Panel NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 71 8. Click the Advanced button to display the Ad vanced Options screen, and se lect the desired advanced options. Note that the Advanced U option is not supported for the NetAXS™ panel. 9. Display and complete the [...]

  • Page 82

    72 www .hon eywell.com Configuring via WIN-PAK Adding a New NetAXS™ Panel 10. Use the following procedure to reassign the interlocks: a. Display the Readers tab, and then display th e first input’ s configuration window . Select None , and click OK . This dissolves all inpu t interlocks and changes the Shunt Time to 0. This allows the input to [...]

  • Page 83

    Configurin g via WIN-PAK Adding a New NetAXS™ Panel NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 73 The screen captures shown below sh ow the configuration for the defa ult interlocking for a single door: 12 Reader 4 tamper/auxiliary . 13 Primary power status - external (or General input). There is also a system [...]

  • Page 84

    74 www .hon eywell.com Configuring via WIN-PAK Adding a New NetAXS™ Panel 1 1. The configuration of a NetAXS™ panel via WIN-P AK is now complete. Configuration is optional on the Outputs and Groups tabs.[...]

  • Page 85

    NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 75 4 Monitoring NetAXS™ S t atus In this chapter ... 4.1 Overview This chapter is written for the NetAXS™ operator who will monitor the following NetAXS™ status: • Alarms – Alarms are events, or system transactions, that have been assigned alarm status. These o[...]

  • Page 86

    76 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Alarms 4.2 Monitoring Alarms Alarms are viewed as system-gener ated messages that may indica te the need for user attention. Note: From the drop down menu at the upper -right corn er of each Alarms tab, you can configure the tab to display alarms in g roups of 10, 25, 50, or 75. Click St[...]

  • Page 87

    Monitoring NetAXS™ Status Monitoring Alarms NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 77 Click the Acknowledged tab to display the acknowledged alarms: Figure 4-2: S tatus > Alarms > Acknowledged T ab The following table describes the information displayed on both the Unacknow ledged alarms tab and Ackno[...]

  • Page 88

    78 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Alarms Date/T ime (ID) Identi fies the date and time the alarm was generated. Device Name [ID] Identifies the device that generated the alarm. LN Logical device numb er – the unique name or number given to the alarm-generating device when th e device was configured in Configuration >[...]

  • Page 89

    Monitoring NetAXS™ Status Monitoring Events NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 79 4.3 Monitoring Event s The Events page monit ors both panel- and web-ge nerated ev ents. For exampl e, a panel event is the reading of a card by a reader . A web event example is a user logon. Click St atus > Event s to[...]

  • Page 90

    80 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Ev ents The following table describes the informa tion displayed on the Panel events tab: T able 4-2: S tatus > Events > Panel T ab Field Descriptions Column Head Description Date/T ime [ID] Provides the date and exact time the event was generated, according to the panel’ s nam e[...]

  • Page 91

    Monitoring NetAXS™ Status Monitoring Events NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 81 Click St atus > Event s > Web to display the W eb events tab: Figure 4-4: S tatus > Events > W eb T ab Note: The number of active users is indicate d in the upper left co rner of the tab.[...]

  • Page 92

    82 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Inputs 4.4 Monitoring Input s A NetAXS™ panel supports door , pa nel, and auxiliary inputs. The do or inputs provide egress and tamper status, the panel in puts provide power fail and tamper stat us, and the auxiliary inputs support any downstream status. Click St atus > Input s to [...]

  • Page 93

    Monitoring NetAXS™ Status Monitoring Inputs NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 83 Ste ps : 1. T o shunt or un-shunt an input, click th e input name to display a prompt. Click OK to complete the shunt or un-shun t.[...]

  • Page 94

    84 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Inputs 2. T o restore the input to its shunt state based on its configured time zone, click the input’ s Restore to Time Zone button to display a prompt. Click OK to complete the restor ation to the configured time zone. Note: The Input Status screen dynamically refreshes when input st[...]

  • Page 95

    Monitoring NetAXS™ Status Monitoring Outputs NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 85 4.5 Monitoring Output s An output is an output d evice that changes its norm al state when it is ener gized, pulse d, or time-zone controlled. For example, a successful card read at a reader pulses a door lock. The lock c[...]

  • Page 96

    86 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Outputs Click St atus > Outputs > Groups to display the Groups tab of the Output Status screen: Figure 4-7: S tatus > Outputs > Gr oups T ab The Output S tatus t ab enables you to: • V iew the current status of each output in the Discrete tab (Energized or De-ener gized). ?[...]

  • Page 97

    Monitoring NetAXS™ Status Monitoring System St atus NetAXS™ Access Control Unit User ’s Guide , Document 800-04410, Revision A 87 4.6 Monitoring System S t atus This feature provides ba sic monitoring of objects in the NetAXS™ system ot he r than alarms, events, inputs, and ou tputs. Click St atus > System to display the System S tatus s[...]

  • Page 98

    88 www .hon eywell.com Monitoring NetAXS™ Status Monitoring Sy stem S tatus[...]

  • Page 99

    NetAXS Access Control Unit User’s Guide , 800-04410, R evision A 89 A Upgrading NetAXS™ Firmware A.1 Overview This appendix provides in structions for upgradin g Ne tAXS™ firmware to release 3.1.8. This version is a new release; it replaces a ll builds of releases 1 and 2, and it includes all functionality provided in Ne tAXS™ releases 1 an[...]

  • Page 100

    90 www .hon eywell.com Upgrading NetAXS™ Firmw are NetAXS™ Release 3.1.8 Upgrade Procedure Release 3 has a new access-le vel database; therefore, any release 3 access-leve l database changes will not take ef fect until the entire l oop is upgraded to release 3. A.2.3 Uploading Dat a from the Panel Note: Before you upgrade a web-based panel, we [...]

  • Page 101

    Upgrading NetAXS™ Firmw are NetAXS™ Release 3.1.8 Upgrade Procedure NetAXS Access Control Unit User ’s Guide , 800-04410, Revision A 91 Note: For WIN-P AK systems, we recommend that you stop the “communications server service” while upgrading, and then restart the servi ce after your panels are upgraded. 2. Connect to your gateway pan el [...]

  • Page 102

    92 www .hon eywell.com Upgrading NetAXS™ Firmw are NetAXS™ Release 3.1.8 Upgrade Procedure 8. Install the new application file, 3-Ne tAXSimage0 3.01.08.bin. T o do this: a. Select the Configuration > System > File Management tab. b. In the Download box, click Br owse to locate the file, 3- NetAXSimage03.01.08.bin . c. Select the file and [...]

  • Page 103

    Upgrading NetAXS™ Firmw are NetAXS™ Release 3.1.8 Upgrade Procedure NetAXS Access Control Unit User ’s Guide , 800-04410, Revision A 93 i. Click OK . j. Close the web brows er and re-open it. k. Enter the IP Address again into the URL box. The login screen appears without the certificate error A.2.6 Clearing the Cache in the Inter net Browser[...]

  • Page 104

    94 www .hon eywell.com Upgrading NetAXS™ Firmw are NetAXS™ Release 3.1.8 Upgrade Procedure[...]

  • Page 105

    NetAXS™ Access Control Unit User’s Guide , Document 800-04410, Revision A Index - 1 Index A Access level 2-45 Access mode 2-33 Acknowledged alarms 4-77 Administrator 2-61 Alarms 4-75, 4-76 acknowledged 4-77 monitoring 4-76 Anti-passback 2-15, 2-34 Auto-relock 2-44, 2-54 Auxiliary outputs 2-55 B Baud rate host 2-13 loop 2-13 C Card and PIN dures[...]

  • Page 106

    In d e x Index-2 www.honeywell.co m Downstream baud rate 2-13 force baud reset 2-13 inputs 2-52 outputs 2-55 Downstream devices 2-23 Duress detect 2-16 E Egress 2-42 Energizing 2-26 Events 4-75, 4-79 F File management 2-17 Firmware downloading 2-17 for WIN-PAK configuration 3-67 reverting to previous 2-17 First card rule 2-41 Force baud reset 2-13 [...]

  • Page 107

    Index NetAXS™ Access Control Unit User’s Guide , Document 800-04410, Revision A Index - 3 NX4IN/NX4OUT boards 2-55 NX4IN/NX4OUTboards 2-52 O Operator 2-61 Output relay 2-38 Outputs 2-38, 4-75 auxiliary 2-55 de-energizing 4-86 downstream 2-23 energizing 4-86 groups 2-57 interlock 2-56 interlocks 2-59 latching 2-56 monitoring 4-85 pulsing 4-86 re[...]

  • Page 108

    Index Index-4 www.honeywell.co m U Unsupervised 2-43, 2-44 Uploading card and configuration data 2-17 Use limits 2-48 Users 2-61 W Web mode monitoring and configurin g 2-11 Web server 1-1 Web server conn ection 1-2 direct 1-3 hub 1-2 Web session timeout 2-15[...]

  • Page 109

    Honeywell Access Sy stems 135 W . Forest Hill Avenue Oak Creek, WI 53154 United S tates 800-323-4576 414-766-1798 Fax www .honeywellaccess.com S pecifications subject to change without notice. © Honeywell. All rights reserved. Document 800-04410, Revision A[...]