Honeywell 70e manual

Dolphin™ 70e Black powered by Android 4.0 User’s Guide[...]

Disc laimer Honeywell International Inc. (“HII”) reserves the ri ght to make changes in specifications and oth er information contained in this document without prior n otice, and the reader should in all cases consult HII to determine whether any such changes have been ma de. The information in this publication does not represent a commitment [...]

T able of Contents iii Chapter 1 - Dolphi n 70e Black Termi nal Agency Information Label Locations ........................................... ........................................... .......................... ....1-1 Model Number, Serial Number and IMEI Labels............................................................1-1 LED Safety ..........[...]

iv Replacing the Battery ...................................................... .................................................. 2- 15 Identifying Your Model Type ................................................. ....................................... 2-15 Replacing the Battery in Terminals Equi pped with a Battery Door L ock ...................[...]

v Capturing Images ............................................................ ................................................... .4 - 7 Taking an Image with the Imaging Demo ............................................................. ......... 4-7 Using the IQ Image Demo to decode intellig ent bar codes and capture image s ........... 4-8 Conf[...]

vi Wi-Fi Network Connections ................................... ..................................................... ......... 7-2 Turning Wi-Fi Networking On or Off .............................................................................. 7-2 Connecting to a Wi-Fi Network .....................................................................[...]

vii Chapter 9 - Working with Bluetooth and NFC Technology Bluetooth Technology ............................................................................ .............................. 9 -1 Turning the Bluetooth Radio On or Off ...................................................... .................... 9-1 Pairing and Trusted Devices.............[...]

viii Chapter 12 - Dolphin 70e Black eBase (M odel 70e-EHB) Overview ........................................... ..................................................... ....................... ..... 12-1 Unpacking the eBase................................................. .................................................. 12-1 Dimensions .............[...]

ix Power ............................................... .......................................... ................................. ...... 14-4 Connecting Power to the ChargeBase ....................................................................... 14-4 Charging the Main Battery ..................................... ............................[...]

x[...]

1 - 1 1 Dolphin 70e Blac k T erminal Ag enc y Information Dolphin 70e Blac k mobile computers meet or e xceed the req uirements of all applicab le standards organizations f or saf e operation. Ho we ver , as with an y electrical equipment, the best wa y to ensure saf e operation is to oper ate them according to the agency guidelines th at f ollow .[...]

1 - 2 UL and C-UL Statement UL and C-UL listed: UL60950-1 2nd Edition, an d CSA C22.2 No . 60950-1-07 2nd Edition. Underwriters Laboratories Inc. (UL) has not tested t he perf or mance or re liability of the global positioning system (GPS) hardware , GPS operating softw are or ot her GPS-related aspects of this product. UL ha s only tested f or the[...]

1 - 3 This equipment has bee n tested and f ound to comply with t he limits f or a Class B digital de vice pursuant to P ar t 15 of the FCC Rules . These limits are desi gned to pro vide reasonab le protection against har mful interf erence in a residential installation. This equipment generates , uses, and can ra diate radio frequency energy and, [...]

1 - 4 Bande 5 Ghz: UNII (Infrastructure Nationale d'Inf or mation Sans P erm is) ou Bande1 (5.1 50 à 5.250 GHz) est limitée à l'usage intérieur seulement. T oute autre utilisation rendr a l'opération de l'appareil illégal. F or body worn operation, ce téléphone a été testé et respe cte les directiv es d'expositio[...]

1 - 5 China RoHS P acemakers, Hearing Aids and Ot her Electricall y P owered Devices Most manuf acturers of medical de vices adhere to the IEC 601-1-2 standard. This standard requires de vices to operate properly in an EM Field with a strength of 3V/m o v er a frequency range of 2 6 to 1000MHz. The maximum allo wable field strength emitted b y the [...]

1 - 6 The ratings a re not guarantees . Results will vary depending on the user's hearing device a nd hearing loss. If y our hearing device happens to be vulnera ble to interf erence, y ou ma y not be able to use this de vice successfully . T r ying out this de vice with your hearing de vice is the best wa y to e va luate it f or your personal[...]

1 - 7 Os modelos 70eLG0 e 70eL00 (Dolphin 70e Blac k) serão f or necidos com os seguinte s carregadores / f ontes de alimentação: Carregador modelo FRA036-S12-4: n úmero de homologação ANA TEL 1615-12-8020. Este carregador será comercializa do com as seguintes bases/docas/perif éricos: 70E-HB e 70E-EHB. Carregador modelo DSA-5CU-05 050100: [...]

1 - 8[...]

2 - 1 2 Getting Star ted Out of the Bo x V er ify that the carton contains the f ollowing items: • Dolphin 70e Black mobile computer (terminal) • 1 GB, 2 GB or 4 GB microSD™ Memory Card (pre-installed) • 3.7V Li-ion rechargeable battery • USB charge/communication cable • Power adapter with regional plug adapters • Quick start guide ?[...]

2 - 2 Dolphin 70e Blac k model terminals not equipped with a battery door lock are designed f or use with batter y par t numbers BA T -ST AND ARD- 01 (Li-ion 3.7V , 6.179 watt hour) and BA T -EXTENDED- 01 (Li-ion 3.7V , 12.358 w att hour) manuf actured for Hone ywell International Inc. See page 2-3 for battery installation i nstructions. Installing[...]

2 - 3 Installing the Battery in T erm inals without a Battery Door Lock The terminal is shipped with the batter y pac kaged separate fro m the unit. P erf or m the steps illustrated below to install the battery . Note: If your Dolph in 70e Black model does not have a battery retention strap, refer to the battery installation instructions on page 2-[...]

2 - 4 Step 2. Charge the Battery The pow er source for the Dolp hin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on th e back pan el of the de vice. See Battery on page 3-12 f or additional inf or mation on battery stor age, use , and disposal. Important: Removing the battery from t he terminal erases all non -per[...]

2 - 5 Option 1: Charging from a power outlet Use only a UL Listed pow er supply , which has been qua lified b y Honeyw ell with an output rated at 5VDC and 1A with the de vice. Option 2: Charging from a high power USB port on a host devi ce (PC) Charging the battery through a USB por t tak es more time than direct charging using the provided po wer[...]

2 - 6 Step 3. Boot the Terminal and Access the Home Screen The terminal begins the boot process as soon as pow e r is applied. Do not press any b uttons or attempt to remov e the battery dur ing the initial boo t process. The W elcome Screen The first time y ou pow er up the Dolphin ter minal, a W elcome screen appears after the boot process is fin[...]

2 - 7 The Home Screen The Android™ operating system provides space f o r user customization and control with fiv e Home Screen panels. Note: Some of t he features listed bel ow are specific to Dolphin 70e Black models equipped with Google Mobile™ Services and may require an acti ve Google account be setu p on your terminal. Note: You can retur [...]

2 - 8 Notification P anel A plus sign icon appears on the status ba r when the quantity of notification s e x ceed the a vailab le space on the bar . T o vie w all the notifications, t ouc h and hold the status bar , and then drag down to open the notification panel. Common Status and Notification Icons Icon Meaning Note: Status an d notification i[...]

2 - 9 New Gmail™ message SD card or USB storage is full New te xt message or multimedia me ssage Bluetooth techno logy is tur ned on New E-mail T e rminal conn ected to a de vice with Bluetooth technology Error with te x t or multimedia message deliv er y Bluetooth incoming file notif ication T e rminal is c onnected to a com puter using a USB ca[...]

2 - 10 Searc h Bar Y ou can search for an item on the terminal or the Internet using Google ™ Search a t the top of any Home screen panel. T o modify the search settings: 1. Touch inside the box then press the Menu button . 2. Touc h Settings then select Searchable items or Google Sea rch . V oice Search and V oice Actions T o initiate Google V o[...]

2 - 11 P ersonalize the Home Screen P anels and Fa vo rites T ray Streamline y our wor k flo w by customizing the Home screen pa nels and Favori te s tra y with your choice of app shor tcuts, f olders , and widgets . T o add an app shor tcut: 1. Touc h All Apps . 2. Select and hold the app icon you want to add. Th e terminal vibrates, and then swit[...]

2 - 12 Hotkeys You can configure the Scan b utton and the Left and Right side buttons of the terminal to launch specific applications. T ouch All Apps > Po w e r T o o l s > Configure Hotkeys . T ouch the bo x next to the ke y being configured. Select the app y ou want assigned to the k ey from the associated men u. Ref er to Features of the [...]

2 - 13 Alter nate K eys Some ke ys include a second symbol in red. In order to use the alter nate symbo l, touch and hold the k ey until the alternate symbol appears, and t hen release the k ey to type the symbol. Honeywell Virtual Ke ypad Creator The def ault enhanced Hone ywell vir tual k eyboard is fully customizab le using the Honeywe ll Vir tu[...]

2 - 14 T urning P ower On/Off T o tur n the terminal On , press and release the Pow e r button . T o tur n the terminal Off : 1. Press and hold the Power bu tton until the Phone Options menu displays. Note: If the Show System Dialog setting is t urned off (see page 6- 2), the Phone Options menu does not display when you press a nd hold the Power bu[...]

2 - 15 Replacing the Battery Note: Befor e replacing the batt ery, read the Guidelines for Battery Pack Us e and Disposal on page 3-16. Identifying Y our Model T ype Dolphin 70e Blac k model terminals equipped with a battery door lock are designe d f or use with batter y par t numbers BA T -ST AND ARD- 02 (Li-ion 3.7V , 6.179 watt hour) and BA T -E[...]

2 - 16 2. Unlock and remove the battery door. 3. Pull the battery latch back and remove the battery. 4. Insert the new battery and install the battery door . Apply pressure to the edges of the battery door to ensure the door is properly closed. Engage the door lock. The terminal begins booting as soon as power is applied. See battery part number sp[...]

2 - 17 Replacing the Battery in T erminals Not Equipped with a Battery Door Loc k The f ollowing instructions are rele v ant f or Dolphin 70e Black terminals equipped with battery retention strap . If you r Dolphin 70e Blac k ter minal does not ha ve a retention str ap , but it does ha ve battery door lock , ref er to the instructions on page 2-15 [...]

2 - 18 5. Secure the battery retention stra p. 6. Install the battery door. Apply pressur e to the edges of t he battery door to ensure the do or is properly closed. The terminal begins booting as soon as power is applied. Important - All batter y and connector doors m ust be present, undamaged, and prope r ly closed to maintain the en vironmental [...]

2 - 19 2. Touc h Reboot . Note: To perfor m a Hard Reset if the t ouch screen has st opped responding, press and hold the Power button f or approximately 8 seconds un til the terminal starts to r eboot. When the reset is complete, the Lo ck screen displays. Connecting the T erminal to a Computer via a USB Connection Y ou can transf er files (e.g., [...]

2 - 20 Touch a folder name or file name to open the folder or file. Note: Due to system pe rmissions, some files cann ot be opened. Depending on the associated application( s), a choice of applications may be available to open the file. Browser Men u Press the Menu button and touch Home to return to the root folder or Close to exit the File Browser[...]

2 - 21 Android OS Android De veloper W eb Site Detailed inf or mation on applica tion de velopment f or Android de vices. http://deve loper.android.com Google Mobile Detailed inf or mation on Goog le Mobile Ser vices (GMS). http://www.google .com/mobile/[...]

2 - 22[...]

3 - 1 3 Har dware Overview Standar d Configurations f or the Dolphin 70e Black WLAN, WPAN & Camera • Android 4.0 • TI OMAP3715 1.0GHz Processor • 512MB RAM X 1GB Flash • 3.7V Li-ion rechargeable standar d or extended battery pack • Dedicated imager capable of decoding standard 1D and 2D bar co de symbologies • 5.0 megapixel auto foc[...]

3 - 2 P eripherals for the Dolphin 70e Blac k Each of the f ollowing items is sold separately to enhance the capabilities of y our Dolphin ter minal. Dolphin 70e Black HomeBase (Model 70e-HB) The Dolphin 70e Blac k HomeBase device is a c harging and communication cradle equipped with a USB host por t that is Hi-Speed 2.0v compliant, which enab les [...]

3 - 3 Accessories f or the Dolphin 70e Blac k Each of the f ollowing items is sold separ ately to enhan ce yo ur ter minal’ s capabilities . Note: When using accessor ies where the terminal is worn on the body, the terminal’s t ouch panel must face away from the body. Dolphin 70e Black Mobi le Charger (Model 70e-MC) The Dolphin 70e Blac k Mobil[...]

3 - 4 Features of the Dolphin 70e Black Front, Bottom, and Right P anels F or a descr iption of each callout, see pag e 3-5 . Search Button Touch Panel Display Scan Button Front Speaker General Noti fication LED Back Button Front Digital Microphone WAN Notification LED USB Door/Micro USB Port Menu Button Right Scan/Image Button Side Digital Microph[...]

3 - 5 Feature Descriptions: Front , Bottom, and Right P anels Back Button By default, the Back button returns you to the previous screen. Bottom Speaker The integrated bottom speaker sounds audio si gnals as you scan bar code labels and en ter data. The integrated spea ker also supports playback of wave and MP3 files, so ftware mixer, and speaker p[...]

3 - 6 Scan Button The Scan button is centrally locat ed for easy acce ss with the right or left hand. When pressed, the Scan button activates th e scanner/imager. The Scan button also functions as a system wake-up control for the terminal. You can reassign the b utton to launch applications or exe cute commands; see Hotkeys on page 2-12. Touch Pane[...]

3 - 7 Bac k, T op, and Left P anels Dolphin 70e Black Models Equipped with a Battery Door Lock Note: If your Dolph in 70e Black model does not have a battery door lock, see page 3-8 . F or a descr iption of each callout, see pag e 3-9. Image Engine Window (LED Aperture) Camera Flash Color Camera Lens Battery Latch (batter y and batter y door not sh[...]

3 - 8 Dolphin 70e Black Models Not Equipped a Battery Door Lock If your Dolphin 70e Black model does not h a ve a batt ery retention strap, see pa ge 3-7 . F or a descr iption of each callout, see Fea ture Descriptions: Back, Top, and Left Panels o n page 3-9. Image Engine Window (LED Aimer Aperture) Camera Flash Color Camera SIM Card Socket * Powe[...]

3 - 9 Feature Descriptions: Back , T op, and Left P anels Audio Jack The audio jack is located under the protective do or on the top of the terminal. To access the jack gently lift the edge of the door and rotate it 90° counterclockwise. The 3.5 mm audio jack supports both speaker (ste reo) and microphone (mono) headsets. Battery The 3.7V Li-ion r[...]

3 - 10 Left Scan/Image Button By default, the left button triggers the scanner /imager. You can reassign the button to launch applications or execute commands; see Hotkeys on page 2-12. Memory Card Socket The memory card socket provides the user wi th the option to expand the terminal’s memory capacity using microSD or microSDHC memory in terface[...]

3 - 11 The I/O Connector The I/O connector po wers the terminal, charges the ma in batter y , and f a cilitates comm unication. Dolphin 70e Blac k per ipher als are designed to w ork exclusiv ely with this connector . The I/O conn ector suppor ts low , full, and high speed USB v2.0 communication with a maxim um rate of 480 Mbps. . Note: Signals ref[...]

3 - 12 Battery The primar y pow er source for the Dolphin t er minal is the 3.7V Li-io n rechargeab le batter y located under the battery door on the back panel of the de vice. Honeyw ell recommends, you k eep the batter y in the terminal charged at all times to help pre vent data loss . Letting the batter y become fully discharged causes the termi[...]

3 - 13 Charging Options Dolphin terminals ship with the batter y significantly discharged of pow er . Before using a Dolphin terminal for the fir st time , charg e the battery with a Do lphin charging de vice for a minim um of 4 hours f or the standard batter y and 6 hour s for the e xtended battery . When using the 70e-USB Charge/ Communication ca[...]

3 - 14 • The maximum current supplied through a ch arging peripheral is 2.0A. • The maximum current supplied by the USB wall charger is 9 00mA. • The maximum current supplied by a USB Host can vary from 100mA to 50 0mA. Do not attempt to charge the terminal fro m a 100mA source. An active Dolphin terminal uses more current than supplied by a [...]

3 - 15 Managing Battery P ower Letting the battery become fully discharged causes the terminal to lose all data in RAM. Honeyw ell recommends , y ou keep a charged batter y in the terminal at all times to help pre vent data loss . Removing the battery from the ter minal er ases all non-persistent me mor y . When the terminal is r unning on batter y[...]

3 - 16 Guidelines for Battery P ack Use and Disposal The f ollowing are general guidelines f or the saf e use and disposal of batteries: • Do not disassemble or open crush, bend or deform, puncture or shred. • Do not modify or remanufacture, attempt to insert f o reign objects into the battery, immerse or expose to water or other liquids, exp o[...]

3 - 17 Installing a SIM Car d and/or Replacing the Memory Card SIM Card Shor t f or Subscr iber Inf or mation Mod ule, a SI M card stores the subscriber's personal inf or mation, GSM/GPRS radio settings, security k eys, contacts , etc. SIM cards can be insta lled in compatib le mobile de vices, enabling you to s witch devices without losing pe[...]

3 - 18 a. Remove the battery door and release the ba ttery retention strap. b. Pull the battery latch back and remove the battery. Do not pull on the battery retention strap when attempting to remove the battery . 3. Lift the card retention flap fo r the appropriate socket. 4. If you are replacing the me mory card, slide the existing card out of th[...]

4 - 1 4 Using the Scan Image Engine Overview The Dolphin 70e Blac k ter minal houses a compact image engin e that instantly reads popular 1D and 2D bar codes and suppor ts omni-directional aiming and deco d ing f or g reater fle xibility in real-world settings . The image engine can also capture b lack and white digital images , such as signatures [...]

4 - 2 Suppor ted Bar Code Symbologies Decoding The terminal suppor ts image decoding for use in v arious bar code reading and imaging applications. Full-area imaging pro vides omni-directional reading of linear and non-linear 1D and 2D bar codes , OCR, signature capture , and picture taking. When reading all bar code types using full-area imaging, [...]

4 - 3 Using the Scan Demo to Decode a Bar Code The Scan Demo demonstr ates the functionality of the integr ated scan image engine in the terminal and is not intended as a funct i onal b usiness solution. De tailed inf or mation on how to create custom applica- tions f or your Dolphin term inal is pro vided in the Software De v elopment Kit (SDK) , [...]

4 - 4 2. Touc h Scan or press the Scan butto n to activate the imaging engine. Once activated, the imager automatically scans and decodes bar co des presented in the field of view. 3. Touc h Scan or press the Scan button to de activate the imager. 4. Slide the Automatic blue button to the OFF position to d isable the feature. Continuous Scanning En[...]

4 - 5 3. Modify the settings to meet your application needs, and then press th e Back button to return to the Scan Demo screen. Settings T ouch the chec kbo x to enable or disab le a f eature. • Vibrate - When checked, the terminal vibrat es to indicate a successf ul bar code scan and decode. • View Statistics - When checked, scan resu lts disp[...]

4 - 6 Using the ScanT ool P ower T ool Note: Detailed in formation on the ScanTool Power Tool is provided in the Dolphin Power Tools for Mobile Devices Powered by Andr oid™ User’s Guide, available fo r download at www.honeywellaidc.com . 1. Touc h All Apps > Power Tools > ScanTool . 2. Touch one of the Quick Start applications. 3. The dev[...]

4 - 7 2D Matrix Symbol Capturing Images The image-capture process is an intuitiv e, split-seco nd oper ation for e xperienced users. By f ollowing the basic guidelines , ne w users can easily de velop their o wn technique and, with practice , quickly learn to adapt it to diff erent application environments . Image Preview When the imaging process i[...]

4 - 8 2. Point the Dolphin terminal at the object. 3. Adjust the terminal’s position until the object a ppears on the touch screen the way you want it to appear in the image. Note: Touch the to toggle the targetin g cross hair on the touchscr een on or off. 4. Touch or press the Scan button to capture the image. 5. To save the captured image, pre[...]

4 - 9 2. Press the Menu button. 3. Touc h Setting to access and modify t he following options: • Select Symbology to configure the type of symbologies you want the IQ Imaging Demo to decode. Touch the symbology’s c heckbox to enable or disable the symbology. Press the back button to return to the IQ Imaging screen. • Select Image Type to choo[...]

4 - 10 5. Touc h Save . The signature imag e file is saved in the mnt/sdcard/honeywell/signaturedemo folder on the microSD card. Uploading Images Image files can be uploa ded to a host wo rkstation using a USB conn ection, see page 2-19 .[...]

5 - 1 5 Using the Color Camera Overview Dolphin 70e Blac k ter minals are eq uipped with 5.0-Megapix el auto f ocus cameras to pro vide easy integra tion of color picture and video ca pture into business applications. The camera lens and camer a flash are located on the bac k panel of the ter minal. Pictures and videos captured using the Camera app[...]

5 - 2 T aking a Picture 1. Open the Camera app (see page 5-1). 2. Verify is selected. 3. Center the object you want to take a picture of on the live preview screen. 4. Touch to capture the picture. Note: Touch the thum bnail preview to access optio ns to share the picture. Select the pictur e again to open the Gallery app where you can edit or dele[...]

5 - 3 Uploading Pictures and Videos Picture and Video files can be uploaded to a computer using a USB connection. F or additional inf or- mation, see page 2-19.[...]

5 - 4[...]

6 - 1 6 Settings Overview The Settings allows y ou to verify and/or alter system par ameters to customized y our ter minal to meet your specific nee ds. T ouch All Apps > Settings or pull down th e notification panel, and then touch the Settings icon ne xt to the date. Wireless & Network Settings See Wireless & Networks Settings on page [...]

6 - 2 Displa y Settings T ouch Displa y from the Settings screen to set the touch screen Brightness le v el, W allpaper , turn A uto-rotate screen on or off , adjust the touch screen Sleep settings, se t the on screen Font size, and enab le or disab l e some Pow e r button functions. A uto-rotate screen By def ault, the display automatically adjust[...]

6 - 3 Storage Settings T ouch Stora g e from the Settings screen to view use and space statistics f or the inter nal stor age on the terminal and the installed SD card. T wo additional options: Unmount SD c ard f or saf e SD card remov al and Erase SD card f or erasing all data on the installed SD card are also av ailabl e from the Storage screen. [...]

6 - 4 • clear cache, or • clear any Launch by default sett ings assigned to the app. T o access the App info screen, touch the app name on the list displa yed under the Do wnloaded or On SD Car d tab on the Settings > Apps screen. Uninstall Applications 1. Press the Menu button from the Home screen, and then touch Manage apps . 2. Touch the [...]

6 - 5 4. Follow the on-scre en instructions to enter the required information for the account type selected. You may need to provide a user name and password, select security settings, and configure data sync preferences during the setup. 5. The account appears on the Accou nts & Sync list when setup is complete. Depending on the settings you s[...]

6 - 6 Encr yption Y ou can encr ypt all the data on y our Dolphin ter minal using the Encrypt phone option as an adv anced security measure in case y our de vice is ev er lost or stolen. When the terminal is encr ypted, you must enter a numeric PIN or pass word each time you tur n the po wer on. The Screen Loc k PIN or passw ord y ou set up is the [...]

6 - 7 Install from SD Card T o install encr ypted cer tificate from the SD card installed in the te r minal: 1. Copy the certificate from the host device (computer) to the root directory of the SD card. Note: Ensur e your certificates are saved with the corre c t file ext ension. Android supp orts DER-encoded X.509 certificates saved with a .crt or[...]

6 - 8 T o modify the def ault method for e ntering text: 1. Touc h All Apps > Settings > Language & input > Default . 2. Select an input method An droid Keyboard or Enhanced Keyboard . Note: Dolphin 7 0e Black terminals ar e shipped fro m the factory con figured to use the Honeywell Enhanced Keyboard as the default input method. T ouch[...]

6 - 9 To configure Text-to-speech (TTS) settings, touch All Apps > Settings > Language & input > T e xt-to-speech output . The settings screen pro vides access for y ou to: • Select and configure the preferred engine used for speech synthesis when you want to hear text read aloud. • Adjust the Speech rate of the synthesized voice. [...]

6 - 10 Ser vices When the Ta l k B a c k ser vice app is enabled, spo ken and vibration f eedback help b lind and vision- impaired users inter act with the ter minal. The spok en feedbac k includes descr iptions of what y ou touch, select, and activ ate. T o enable or disab le the Ta l k B a c k ser vice app , select T alkBac k on the Accessib ilit[...]

7 - 1 7 Comm unication Wireless & Networks Settings Under the Wireless & Networks heading on the Settings screen there are options for turning the onboard wireless radios in the terminal on or o ff and for configuring n etwork connections. Connecting the T erminal to a Wireless Network Y ou connect the term inal to a wire less network throu[...]

7 - 2 Wi-Fi Netw ork Connections T urning Wi-Fi Networking On or Off 1. Touc h All Apps > Settings 2. Touch the Wi-Fi OFF /ON toggle box to turn the radio or . Connecting to a Wi-Fi Network 1. Touc h All Apps > Settings > Wi-Fi . 2. Verify the Wi-Fi is turned . 3. The terminal searches for avail able Wi-Fi access p oints within r ange of t[...]

7 - 3 Adv anced Wi-Fi Settings and Network Utilities Adv anced Wi-Fi Menu The Adv anced Wi-Fi menu provid es access to set net w or k notifications , modify Wi-Fi radio activity during Suspend mode, idle timeout se ttings, or vie w the ter minal MA C address and IP address . • Network notification Turn on or off available W i-Fi network notificat[...]

7 - 4 Wireless Manager P ower T ool The Wireless Manager network utility prov ides access to the Wi-Fi Mana g er and the Connection Manager (WW AN) where y ou can vie w and change the st atus of the terminal radios, scan and add net- works, vie w current access point statistics, select y our network fir mw are and set y our hyper roaming preference[...]

7 - 5 2. Under Wireless & Networks , touch More > VPN . Note: VPN connections requir e you to set a screen lock PIN or password be fore you can use credential storage. I f you have not set eith er security option, select OK on the pop-up notification window, and t hen set a screen lock PIN or passwo rd. Once you complete th e process, you ar[...]

7 - 6[...]

8 - 1 8 W orking with Wireless Wide Area Netw orking (WW AN) Overview The Dolphin 70e Blac k has two r adio options f or WW AN voice and data communications: • a multi-mode (software definable) WW AN radio, which provides support for three ba nd 3.9G UMTS/HSPA+ (850/1900/2100 MHz), quad band GSM/GPRS/EDG E (850/900/1800/1900 MHz), and dual band C[...]

8 - 2 F or ter minals with the m ulti-mode (software definab le) WW AN radio: • A penta band antenna su pports 850, 1900, 2100 Mhz (UMTS/HSPA), 850/900/1800/1900 Mhz (GSM/GPRS/EDGE) and 800/1900 Mhz (EV-DO/CDMA). • A diversity receiver antenna supports 850 & 1900Mhz F or ter minals with the GSM WW AN r adio: • A penta band antenna that su[...]

8 - 3 • Headset Mode When a headset is plugg ed into the Audio Jack, the terminal defaults to the headset for receiving calls and audio in put. • Hands-Free Mode The bottom speakers are used as a speaker phone. To switch to speaker phone durin g a call, touch on the phone icon in the tile bar at the bottom of the screen , and then select Speake[...]

8 - 4 2. Input the telephone number using the keypad. Note: If you make an err or, touch once to delete the last dig it entered or touch and hold to delete t he entire number entered. Touch if you want to perform a te xt search to find a co ntact. 3. Touch the Phone ico n below the keypad to initiate the call. T ouch the End Call icon to disconnect[...]

8 - 5 Additional Options A v ailable During a Call Once a phone call is in process , you can access to the f ollowing options b y touching the rele vant icon. Accessing V oicemail The V oicemail icon appears on the status bar at the top of the screen when y ou hav e a new v oicemail message. T o dial v oicemail: 1. T ouch and hold the status b ar ,[...]

8 - 6 Phone App Settings Open the Phone app , press the Menu b utton , and select Settings to setup and ma nage adv anced phone options. Fixed Dialing Number s (FDN) When FDN is enab led, outgoing calls are restricted to fix ed dialing numbers sa ved on the activ e SIM card installed in the terminal. Select Fixed Dialing Number s from the Settings [...]

8 - 7 5. Check the box next to “Set as primary account” if you want the account to be used as the default for all outbound Internet calls. 6. Select Optional settings to configure Authentication user name, Display name, Outbound proxy address, Port number, Transport type and Send keep-alive. 7. Touc h Save . Once added , the new account is list[...]

8 - 8 Outgoing Inter net Call Settings T o configure when y our pr imary Inter net calling account should be used f or outgoing calls: 1. Open the Phone app , press the Menu b utton , and select Settings . 2. Touc h Use Internet calling under th e Internet call settings heading. 3. Select when you want the primar y Internet calling account used for[...]

8 - 9 Impor ting Contacts from a SIM card 1. Verify the SIM card that inclu des your sa ved contacts is instal led in the terminal. 2. Touch the People app on the Home screen. 3. Press the Menu button . 4. Touc h Import/export. 5. Touc h Import from SIM card . 6. If required, select an account where you want the contacts added. 7. Either touch a co[...]

8 - 10 Enable/Disab le Data T ransmission When Roaming Check the Data r oaming bo x to allow data tr ansmission on networks outside your carrier’ s mobile network. Note: If thi s option is ena bled, additional char ges may apply dependin g on the covera ge of your mobile dat a network plan. Select F requency Band Mode Select Frequency Band Mode t[...]

8 - 11 4. On the Edit access point screen, touch an item to ente r new information or modify the existing APN settings. Note: Ask your wireless service provide r for the correct settin gs if you are unsure of th e information required . 5. Press the Menu button on the terminal’s keypad . 6. Touc h Save to keep your edits. Note: Select Discard to [...]

8 - 12 Navigating the Data Usage Screen Only mobile network statistics are displa yed th e first time you access the Data usa ge screen. T o view Wi-Fi and/or Eth er net inf or mation, press the Menu b utton and select Show Wi-Fi usa g e and/or Show Ethernet usage . Once enab led, you can s witch between netw ork types by select ing the rele vant t[...]

8 - 13 Setting a Data Us age W ar ning Limit Y ou can set the ter minal to displa y a warning message when a specific data usage le vel is reached. Drag the or ange line on the graph to the data le v el that you want a s the trigger for a w ar ning message . Setting a Data Usage Limit Y ou can set the ter minal to automatically tur n Mobile data OF[...]

8 - 14[...]

9 - 1 9 W orking with Bluetooth and NFC T echnology Bluetooth T echnology T urning the Bluetooth Radio On or Off Bluetooth™ is a shor t-range wirele ss communicati ons technology used to e xchanged data betwe en de vices over a distance of a pproximately 26.2 f eet (8 meters). Befor e you can co nnect or pair your termi- nal to another de vice us[...]

9 - 2 3. On the Paired Devices list touch the settings icon next to name of the device you want to disconnect. 4. Touc h Rename , Unpair or select a different profile from the Profiles list available for the paired device. Making the T erminal Disco verable By def ault, the Dolphin ter minal is not disco verab le, wh ich means that the te r minal w[...]

9 - 3 6. The Bluetooth device picke r screen opens. Do one of the following: a. Touc h Scan for devices , a nd then touch the name of the re ceiving de vice from the available device list . OR b. Touch on the name of an alrea dy paired device from the Bluetooth device list. 7. A pop-up message notifies you the file is Sending and the upload notific[...]

9 - 4 Security Recommendation NFC functionality is enab led by def ault on Dolphin 70e Black models ending with th e letter N (e.g., 70e xxN). The recommended setting f or NFC functionality is disabled unt il the f eature is required. Enab ling NFC allows data e xchanges between the ter minal and other NFC de vices or tags. F or inf or mation on se[...]

9 - 5 See page page 9-5 f or inf or mation on Using the NFC Demos . T ransferring screen content via NFC 1. Verify NFC is enabled (see page 9-4) . 2. Verify Android beam is enabled on the sending terminal. 3. Open the item you want to share (e.g., co ntact, picture, or Web page). 4. Hold the terminals back to back. The sending te rminal emits a sou[...]

9 - 6 1. Touch NFC T ag Demo from inside the NFC Demos app. 2. Touc h Write a contact . 3. Select a contact from your saved contacts list. 4. Hold the writable or rewritable NFC tag close to the back of the terminal. A “Write successful” popup message displays on the screen. To Write a message on an NFC tag: 1. Touch NFC T ag Demo from inside t[...]

9 - 7 The file image and saved location are d isplayed on the receiving terminal scre en when the transfer is successful. By default, the file is saved to th e root Honeywell/nfcbtdemo folder of t he microSD card. 9. Select the Back button to exit the demo. Note: The NFC Bluetooth demo au tomatically disables B luetooth techno logy when the dem o i[...]

9 - 8[...]

10 - 1 10 W orking with GPS Overview The Dolphin 70e Blac k ter minal con tains an integrat ed GPS module that allows locatio n trac king of workers and v ehicles, pro viding better utilization of field assets. Optional map ping and na vigation software provides turn-by-turn dr iving directio ns and location information. GPS and A GPS Settings T ou[...]

10 - 2 Using the Logger in the GPS Demo 1. Select the Logger tab from the GPS Demo scree n. 2. Edit the following items or accept the defaults: a. File Name and Location b. Track N ame c. Track Description d. Interval (secs) e. Track c olor 3. Touc h Start Logger to begin collecting and logging GPS data. 4. Touc h Stop Logge r to finish collecting [...]

11 - 1 11 Dolphin 70e Blac k HomeBase (Model 70e-HB) Overview The Dolphin 70e Blac k HomeBase (Model 70e-HB) is a charging and comm unication cradle that suppor ts USB Hi-Speed 2.0v communication, which enab les the ter minal to interf ace with the majority of PC-based enterpr ise systems. The HomeBase also contains an auxiliar y batte r y we ll th[...]

11 - 2 Communications Reliable data communications at speeds of up to 480 Mbps can be tr ansmitted b y the base through the Hi-Speed USB por t. Note: These bases cannot be physica lly connected to each other - sometimes refe rred to as “daisy-chained”. Con venient Storage The intelligent battery charging system makes this base a saf e and con v[...]

11 - 3 P ar ts and Functions Front P anel Terminal Well Place the terminal in this well to communicate with a host device, powe r the terminal, and charge the installed battery pack. The base comp letely charges the ma in battery in a Dolphin terminal in 4 hours for the standard batt ery or 6 hours for the extended battery. See page 11- 7 for infor[...]

11 - 4 COMM LED This is the communication LED. It indicates the status of data transfer between t he Dolphin terminal and the host device. Bac k P anel Auxiliary Battery Well The base enables you to charge an additional battery pack inde pendently of the terminal well in 4 hours for the standard battery o r 6 hours for the e xtended batter y. This [...]

11 - 5 Bottom P anel F or details on how to mount the HomeBa se, see Mounting the HomeBase on page 11-7. Po w e r The base requires 12 V olts DC input f or communicati ons, battery charging, and power output to the terminal. The power adapter include d with the base, co nv er ts the voltag e from the A C power source to 12 V olts DC . Use only a UL[...]

11 - 6 Charging the Main Battery The base pro vides power to the Dolphin ter minal and allo ws the charging of the terminal’ s batter y . The intelligent batter y charging system incorpo- rated into all Dolph in ter minals pre v ents o vercharging, which means that Dolphin terminals ma y be stored in the base indefinitely wit hout damage to the t[...]

11 - 7 Communication Dolphin terminals suppor t USB communications o ut of the bo x. The base also suppor ts USB communi- cations via the USB por t located on the bac k. The base acts as a USB de vice by interf acing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cab le, the base’ s USB interf ace[...]

11 - 8 • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4 • 3/16 in. dia nut, Qty. 2 Note: The items listed are f or reference only. Final hard ware selection is dependent on t he material type and thickness of the mounting surface. Installing the DIN Rail 1. Slide the DIN rail into the slot along the bo ttom panel of the base. 2. Use t[...]

12 - 1 12 Dolphin 70e Blac k eBase (Model 70e-EHB) Overview The Ethern et Base (eBase) enab les a single Dolphin 70e Blac k computer to communicate with a host de vice ov er an Ethernet network. The 70e-EHB charger is designed f or use with the f ollowing Dolphin models an d batteries, man uf actured f or Honeywell International Inc: We recommend u[...]

12 - 2 Con venient Storage The intelligent battery charging system makes this base a saf e and con v enient storage receptacle f or y our Dolphin terminal. Capacity The base holds one terminal and featu res an auxiliar y battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base[...]

12 - 3 P ar ts and Functions Front P anel Terminal Well Place the terminal in this well to communicate with a host device, powe r the terminal, and charge the installed battery pack. The eBase comp letely charges the main battery in a Dolphin terminal in 4 hours for the standard batt ery or 6 hours for the extended battery. Auxiliary Battery Well S[...]

12 - 4 COMM LED Indicates the status of the connection and data transfe r between the Dolphin terminal and the host device. Note: Ethernet activity is indicated by RJ45 integrated LED on the back pa nel of the base. Bac k P anel Auxiliary Battery Well The eBase enables you to charge an additional bat tery pack independently of the terminal well in [...]

12 - 5 DC Power Jack See Power . Bottom P anel F or details on how to mount the eBase , see Mounting the eBase on page 12-8. Po w e r The base requires 12 V olts DC input f or communications , battery charging, and power output to the ter- minal; the po wer adapter includ ed with the base con ver ts the v oltage from the A C power source to 12 V ol[...]

12 - 6 Charging the Main Battery The base pro vides power to the Dolphin ter minal and allo ws the charging of the terminal’ s batter y . The intelligent batter y charging system incorpo- rated into all Dolph in ter minals pre v ents o vercharging, which means that Dolphin terminals ma y be stored in the base indefinitely wit hout damage to the t[...]

12 - 7 Communication Establi shing Ethernet Comm unication Connecting the Dolphin T e r minal to the eBase By def ault, the Dolphin ter minal is configured to o btain IP addresses automa tically via DHCP ser v er . This means that in most cases y ou would simply plug-and-pla y the unit. 1. Connect power to the eBase (see Power on page 12-5). 2. Plu[...]

12 - 8 Displa ying the eBase and T er minal IP Address Once the Dolphin terminal has been successfully connected to the netw or k through eBase , the ter minal uses the eBase IP address . The IP address can be used b y any application on the Dolphin terminal. T ouch All Apps > Settings > About Phone > Status to view the assigned IP Addr es[...]

12 - 9 Optional DIN Rail Mount A DIN rail (7.5 X 35 mm) ma y be installed on the bottom of the base to pro vide the optional security of mounting the base to a flat horizontal surf ace with hardw are. Additional Hardware • DIN Rail, Qty. 1 • 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer,[...]

12 - 10[...]

13 - 1 13 Dolphin 70e Blac k Mobile Base (Model 70e-MB) Overview The Dolphin Mobile Base charging cr adle is designed specifically f or in-premise and in-transit data collection applications . The base feat ures a mounting br ack et and a cigarette lighter adapter to adapt it to your en vironment. The 70e-MB charger is designed f or use with the f [...]

13 - 2 Dimensions W eight Mobile Base and adjustab le ar m weight: 270g [.595 lbs] Mobile Base Components Adjustable Arm with Suction Cup Base for Windshiel d Mounting The Mobile Base includes a two point adjustable arm with a suction cup base for fixed mount locations (e.g., a car windshield). 159.98 mm [6.30 inches] 109.82 mm [4.32 inches] 42.15 [...]

13 - 3 Power Adapter The mobile base is provided with a power adapt er cable that can b e connected to a vehicle cigarette lighter outlet. UL listed power supply Input: 10V - 30VDC, 0.43A(30V) - 1.28A(10V) Output: 4.75V - 5.25VDC, 0 - 2A Verify that the power source is always wi thin the specified range and observe correct input voltage polarity. A[...]

13 - 4 Installation 1. Push the suction cup base firmly to the windshield. 2. Flip the mounting lever down to secure the suction cup. 3. To adjust the angle of the bracket arm, twist the thumb screws counterclockwise to loosen the locks. Reposition the angle of the arm, and then twist the knobs clockwise to lock the arm into p osition. Suction Cup [...]

13 - 5 4. Insert the power cable connector in to the power jack on the Mobile Base. 5. Twist the cable connector 9 0° clockwise to engage the cable lock. 6. Plug the power adapter into the vehicle power outlet (e.g., cigarette lighter outlet) Charging the Main Battery The mobile base prov ides pow e r to the Dolphin and allows charging of the main[...]

13 - 6 3. Pull the spring latch back and insert the Do lphin 70e Black into the terminal well. Char ging begins immediately if required by the Dolp hin terminal. Note: Align the co ntacts on the back panel of the termi nal with the charging contacts on the Mobile Ba se. Remo ving the Cable Attempting t o remove t he cable withou t disenga ging the [...]

14 - 1 14 Dolphin 70e Blac k ChargeBase (Model 70e-CB) Overview The Dolphin 70e Blac k ChargeBase is a 4-slot charging cradle that can pow er four Dolphin terminals, and charge their main batteries in 4 hours f or the standard battery or 6 hours f or the e xtended batter y . The 70e-CB charger is designed f or use with the f o llowing Dolphin model[...]

14 - 2 Capacity The base holds up to f our Dolphin terminals. Each charging well charges each ter minal independently of the other we lls. Dimensions W eight ChargeBase we ight: 674g [1.49 lbs. ] Note: Weight excludes packagin g , cables and po wer supply. 427.11 mm [16.80 inches] 98.8 mm [3.89 inches] 59.75 mm [2.35 inches][...]

14 - 3 P ar ts and Functions Front P anel Terminal Wells The base contains four terminal wells, which offer in dependent battery charging for each docked termin al. Dock LEDs The Dock LED indicates if the terminal is properly seated in th e charging well. Ea ch well has a dedicated Dock LED, which illuminates blue when a terminal is properly seated[...]

14 - 4 Bottom P anel F or details on how to mount the base , see Mounting the ChargeBase on page 14-5. Po w e r The terminal requires 12 V olts DC input f or batter y charging and po wer output to the ter minal. The po wer adapter included with the base , conv er ts the voltage fro m the A C po wer source to 12 volts DC . Use only a UL Listed po we[...]

14 - 5 Charging the Main Battery The base prov ides pow e r to the Dolph in terminals and al lows charging of the batte ries in the ter minals. The battery of each ter minal charges in 4 hours f or the standard battery or 6 hours f or the extende d battery . The intelligent batter y charging system incorporated into all Dolphin terminals pre ve nts[...]

14 - 6 Optional DIN Rail Mount A DIN rail (7.5 X 35 mm) ma y be installed on the bottom of the base to pro vide the optional security of mounting the base to a flat horizontal surf ace with hardw are. Additional Hardware • DIN Rail, Qty. 1 • 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer,[...]

15 - 1 15 Dolphin 70e Blac k Net Base (Model 70e-NB) Overview The Net Base enab les up to f o ur Dolphin 70e mob ile computers to communicate with a host de vice over an Ethernet network. In addition, the Net Base pro v ides a second RJ45 Ethernet por t fo r connection to an additional de vice such as a printer , workstation, Net Base, or another N[...]

15 - 2 Con venient Storage Intelligent battery charging system makes this base a saf e and conv enient storage receptacle f or your Dolphin ter minal. Capacity The base holds up to f our Dolphin terminals. Each charging well charges each ter minal independently of the other we lls. Dimensions W eight Net Base weight: 694g [1.53 lbs .] Note: Weight [...]

15 - 3 P ar ts and Functions Front P anel Terminal Wells The base contains four terminal wells, which offer in dependent battery charging for each docked termin al. DOCK LEDs The Dock LED indicates if the terminal is properly seated in th e charging well. Ea ch well has a dedicated Dock LED, which illuminates blue when a terminal is properly seated[...]

15 - 4 Bac k P anel RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernet- compliant device to facilitate Ethernet commun ication to and from the terminal by plugging a standard CAT-5 Ethernet cable into one of t he two Ethernet ports provided. The second RJ45 Ethernet port can be used for co[...]

15 - 5 Bottom P anel F or details on how to mount the base , see Mounting the Net Base on page 15-7. Po w e r The terminal requires 12 V olts DC input f or batter y charging and po wer output to the ter minal. The po wer adapter included with the base , conv er ts the voltage fro m the A C po wer source to 12 volts DC . Use only a UL Listed po wer [...]

15 - 6 T o P ower a T erminal and Charge the Main Battery Ensure all com ponents are dry prio r to mating termin als/batteries with per ipheral devices. M ating wet components may cau se damage not covered by the warr anty. 1. Install the battery in the te rminal, see page 2-1. 2. Slide the Dolphin terminal into on e of the four terminal wells. The[...]

15 - 7 3. Select Static IP under “Connection T ype”, then input the IP address and any ad ditional inf or mation based on y our network configuration. 4. T ou ch Sav e . Ether net Pro xy Settings T o set up a pro xy to use when accessing y our network with Ether net: 1. T ou ch All Apps > Settings > Ethernet proxy settings. 2. Input the P[...]

15 - 8 Additional Hardware • DIN Rail, Qty. 1 • 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4 • 3/16 in. dia nut, Qty. 2 Note: The item s listed above are for refer ence only. Fina l hardware selection i s dep endent on the material ty pe and thickness of the mounting surface. [...]

16 - 1 16 Customer Suppor t Pr oduct Service and Repair Honeyw ell Inter national Inc. provides service f or all of its products through service centers throughout the world. T o obtain warra nty or non-warr anty ser vice, please visit www.h oneywellaidc.com , and sele ct Support > Contact Service and Repair to see your region ’ s instructions[...]

16 - 2 tions, (C) static electricity or electro-static disc harge , (D) operation under conditions be yond the speci- fied operatin g parameters , or (E) repair or service of the product by an yone other than HII or its authorized representativ es. This warr anty shall e xtend from the time of shipment f or the duration pub lished by HII f or the p[...]

16 - 3 How to Extend Y our W arranty Honeyw ell Inter national Inc. off ers a v ariety of ser vice plans on our hardw are products. These agree- ments off er continued cov erage f or your equipment after t he initial w arranty e xpires. F or more inf or ma- tion, contact y our Sales Representativ e, Customer Account Representativ e, or Product Ser [...]

Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 70E-AND-UG Rev C 10/14[...]