Hayter Mowers 41 Electric manual

(English V ersion) FROM SERIAL NO’ s: 309C001001, 31 1C001001 HANDBOOK: 309054 (REV .0.) ISSUE 28.09.04 OWNER'S HANDBOOK Harrier 41 Electric CODES 309C 31 1C[...]

Code 309C 31 1C Supply 230V~50Hz 230V~50Hz Rated Input 1.5 kW 1.5 kW Fuse Rating 13A 13A W eight 25.5 Kg 25.5 Kg Cutterblade Speed 2950rpm 2950rpm Cutting width 410mm 410mm Cutting height 25 - 65mm 25 - 65mm Overall dimensions 1,270 x 451 x 1,041mm 1,270 x 451 x 1,041mm Operator Ear Noise Level Lpa 80 dB (A) Lpa 80 dB (A) Sound Power Level Lwa 91 d[...]

1.19 - 1.22 Mower Maintenance 1.19 - Deck Housing 1.19 - Securing Nuts and Bolts 1.19 - Lubrication 1.19 - Motor 1.19 - Switch Contr ol Unit 1.20 - Cutterblade Removal 1.20 - Cutterblade Assembly 1.21 - Cutterblade Sharpening 1.21 - Supply Cable 1.22 - Storage 1.23 - 1.24 T r ouble Shooting 1.25 Declaration of Conformity 1.26 - 1.27 Parts List 1.28[...]

INTRODUCTION 1.4 Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and unde[...]

W ARRANTY 1.5 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish th[...]

SAFETY PRECAUTIONS 1.6 his safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Car efully read the following and inform others. Y our mower is perfectly safe if used correctly . Failur e to observe the following precautions may r esult in serious injury . Read the instructions ca[...]

PRECAUTIONS SAFETY 1.7 Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts and screws for tightness. Use only gen- uine Hayter parts. Damaged cutterblades and loose fixing bolts are major hazards. Before use, visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterbl[...]

1.8 Use extreme caution when reversing or pulling the mower towards you. Switch off if the mower has to be tilted for transportation when cross- ing surfaces other than grass and when transporting the mower to and from the area to be mowed. Never operate the mower unless the guards are securely in position and in good condition. Start the mower car[...]

1.9 SAFETY PRECAUTIONS Safety Symbols Safety Alert - Be aware to the possibility of injury . Danger of severing toes or fin- gers in cutting mechanism. Carefully read the Owners Handbook before using the machine. Danger of being hit by thrown objects. Switch off and remove plug from mains before performing maintenance or repair work. Keep bystander[...]

ASSEMBLING THE MOWER 1.10 Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Owner ’ s Handbook. 2. Grassbag. 3. Supply Cable - (309C Only) T o prevent accidents cut off the long ribbon attached to the grass- bag and discard. Unscrew[...]

MOWER THE OPERA TING 1.11 Position the mower on the grass area to be cut. Carefully uncoil the supply cable clear of the mower and take the plug end connection to the mains socket outlet. Ensure that the mains socket is switched 'OFF' before locating the RCCB unit - Refer to "Safety Precautions" - Preparation. Switch 'ON&ap[...]

Stopping Release the motor switch control lever to stop the motor . W ARNING: A VOID ACCIDENTS - The cutterblade may contin- ue to rotate after the mower is switched off Hold the trigger against the handle and raise or lower the mower using the handle to achieve the desired height of cut. Release the trigger to secure the mower at the required posi[...]

MOWER THE OPERA TING 1.13 2 4 6 Raise the rear deflector and lift the grassbag through the handlebar and lower the rear deflector to rest against the rear of the mower . T o empty the grassbag, pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. Wh[...]

1.14 W ARNING: PREVENT ACCIDENTS - T ake extreme care do not mow across the supply cable. If this should occur , switch off immedi- ately and disconnect the plug from the power supply . Carefully exam- ine the cable for cuts and damage. A defective cable must be replaced before the mower is used again. Always be aware of the location of the supply [...]

1.15 Do not let the motor labour or slow down through being overloaded in work. When this situation occurs, raise the front of the mower slightly by bearing down on the handlebar , allow the motor to reach maximum speed and proceed to mow at a slower pace. Alternatively readjust to a higher cut position. If the motor continues to labour , switch of[...]

1.16 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the ground conditions a[...]

1.17 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out the thatch from the t[...]

1.18 Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. Remove grass debris from around the motor and air ways in the cowl and underside of the d[...]

1.19 Remove grass debris from the top and underside of the deck housing immediately after use. T o prevent accidents fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and stor e well away from corr osive materials. Regularly check that all securing nuts and bolts are tig[...]

1.20 T urn the mower on its side. Firmly grip the end of the cutterblade with a gloved hand and remove the bolt. The carrier may be removed from the shaft. This should be cleaned and replaced. Ensure that the flats on the shaft locate correct- ly with the flats on the carrier . Ensure that the new cutterblade is the correct way up with the turned e[...]

1.21 1CG480V25B A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water . Inspect the cutterblade for signs of damage.Sharpen both cut-[...]

1.22 Handlebar storage: T o lower the handlebar unscrew the 2 securing knobs sufficiently to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the power cable does not become snagged at the pivot point. Storage for long periods: T o ensure your mower is maintained in good working order it is important that the fo[...]

1.23 TROUBLE SHOOTING PROBLEM POSSIBLE F AUL T REMEDY Motor fails to start. Mains supply socket dead. T est socket by plugging in another appliance. RCCB tripped. Remove mower plug and check RCCB action. Check the supply cable for any obvious signs of damage and replace immediately if defective. If no obvious faults are found a serious fault is ind[...]

1.24 SHOOTING TROUBLE PROBLEM POSSIBLE F AUL T REMEDY Motor vibrates excessively . Mounting bolts loose. T ighten bolts. Cutterblade bolt loose. T ighten bolt. Cutterblade out of balance. Balance cutterblade. Uneven cut Undulating ground contours. Change direction of travel. Cutterblade worn. Sharpen the cutterblade. Cutterblade out of balance. Bal[...]

1.25 CONFORMITY OF DECLARA TION VIBRA TION INFORMA TION Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the handlebars. CODE 309C = 1.1 ms -2. . CODE 31 1C = 1.1 ms -2. . EC DECLARA TION OF CONFORMITY HA YTER LIMITED, Spellbrook, Bishop’ s Stortford, Herts CM23 4BU ENGLAND declare that the l[...]

1.26 PA R T S LIST ITEM NO. 1 Deck 305101V 1 1 2 Handle Height Adjuster 3051 12 1 1 3 Screw - M6 x 16 09596 6 6 4 Spring - T rigger 300067 1 1 5 T rigger 300066 1 1 6 Screw - M6 x 20 T aptite 09575 3 3 7 Ferrule - Plastic Dia. 8 3051 15 2 2 8 Spring - Deflector R/H 3051 1 1 1 1 9 Spring - Deflector L/H 3051 10 1 1 10 Coachbolt - M8 x 45 09569 2 2 1[...]

1.27 ITEM NO. DECRIPTION P AR T NO. QTY . ITEM NO 309 31 1 41 Base Plate Motor 309019 1 1 42 Motor Flange 309024 1 1 43 Bolt - M8 x 40 Hex. Hd 09681 3 3 44 Motor Screen 309025 1 1 45 Capacitor 309039 1 1 46 Screw - No. 14 x 1.1/4” Self T ap 09670 4 4 47 Motor - 1.5 kw 309052 1 1 48 Motor Cover Mk2 309046 1 1 49 Screw - No. 14 x 1.1/2” Self T ap[...]

1.28 12 1 12 3 3 31 38 18 27 27 16 3 13 14 12 17 30 3 2 36 35 4 5 3 6 8 6 9 10 7 70 59 32 33 34 24 23 6 22 19 21 20 11 12 12 25 26 29 16 28 29 16 28 26 25 15 18 23 37 39 39 39 40 40 40 41 42 43 43 43 44 45 46 46 46 47 48 49 49 49 50 51 52 53 53 54 55 56 57 57 58 58 60 60 60 61 62 62 63 64 65 66 67 68 69 71 72 74 73 1C309L03A LIST PA R T S[...]

NOTES 1.29 Notes:-[...]

1.30 NOTES Notes:-[...]

1.31 NOTES Notes:-[...]

1.32 CUST OMER INFORMA TION Serial No : Motor T ype :-A TB Austria 1.5kw Code 309C Motor T ype :-A TB Austria 1.5kw Code 31 1C Date of Sale :- Y our Local Dealer :- DEALER ST AMP[...]