Ford 2006 Ranger manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Ford 2006 Ranger, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Ford 2006 Ranger one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Ford 2006 Ranger. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Ford 2006 Ranger should contain:
- informations concerning technical data of Ford 2006 Ranger
- name of the manufacturer and a year of construction of the Ford 2006 Ranger item
- rules of operation, control and maintenance of the Ford 2006 Ranger item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Ford 2006 Ranger alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Ford 2006 Ranger, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Ford service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Ford 2006 Ranger.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Ford 2006 Ranger item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Introduction 4 Instrument Cluster 12 W arning lights and chimes 12 Gauges 16 Entertainment Systems 19 AM/FM stereo 19 AM/FM Stereo single CD/MP3 system 21 In-dash CD6/MP3 disc Premium/Audiophile Pioneer audio system 29 T remor IV CD/MP3 audio system 37 Auxiliary Input Jack 46 Satellite Radio Information 47 Climate Controls 51 Heater only 51 Manual [...]

  • Page 2

    Seating and Safety Restraints 79 Seating 79 Safety restraints 82 Airbags 97 Child restraints 105 Tires, Wheels and Loading 1 16 T ire Information 118 T ire Inflation 120 T ire Pressure Monitoring System (TPMS) 133 V ehicle loading 137 T railer towing 143 Recreational towing 154 Driving 156 Starting 156 Brakes 160 T ransmission operation 163 Roadsid[...]

  • Page 3

    Maintenance and Specifications 220 Engine compartment 222 Engine oil 226 Battery 232 Engine Coolant 234 Fuel information 239 Air filter(s) 256 Part numbers 257 Maintenance product specifications and capacities 259 Engine data 264 Accessories 268 Index 271 All rights reserved. Reproduction by any means, electronic or mechanical including photocopyin[...]

  • Page 4

    CALIFORNIA Proposition 65 W arning W ARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemic[...]

  • Page 5

    SAFETY AND ENVIRONMENT PROTECTION W arning symbols in this guide How can you reduce the risk of personal injury to yourself or others? In this guide, answers to such questions are contained in comments highlighted by the warning triangle symbol. These comments should be read and observed. W arning symbols on your vehicle When you see this symbol, i[...]

  • Page 6

    SPECIAL NOTICES New V ehicle Limited W arranty For a detailed description of what is covered and what is not covered by your vehicle’ s New V ehicle Limited W arranty , refer to the Warranty Guide that is provided to you along with your Owner’ s Guide. Special instructions For your added safety , your vehicle is fitted with sophisticated electr[...]

  • Page 7

    Event Data Recording Other modules in your vehicle — event data recorders — are capable of collecting and storing data during a crash or near crash event. The recorded information may assist in the investigation of such an event. The modules may record information about both the vehicle and the occupants, potentially including information such [...]

  • Page 8

    Using your vehicle with a snowplow Do not use this vehicle for snowplowing. Y our vehicle is not equipped with a snowplowing package. Using your vehicle as an ambulance Do not use this vehicle as an ambulance. Y our vehicle is not equipped with the Ford Ambulance Preparation Package. Cell phone use The use of Mobile Communications Equipment has bec[...]

  • Page 9

    Middle East/North Africa vehicle specific information For your particular global region, your vehicle may be equipped with features and options that are different from the ones that are described in this Owner’ s Guide; therefore, a supplement has been supplied that complements this book. By referring to the pages in the provided supplement, you [...]

  • Page 10

    These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner’ s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Child Seat Installation W arning Child Seat Lower Anchor Child Seat T ether Anchor Brake System Anti-Lock Brake System Brake Fluid - Non-Petroleum Based Powertrain Malfuncti[...]

  • Page 11

    V ehicle Symbol Glossary Power W indows Front/Rear Power W indow Lockout Child Safety Door Lock/Unlock Interior Luggage Compartment Release Symbol Panic Alarm Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, or Sparks Battery Acid Explosive Gas Fan W arning Power Steering Fluid Maintain Corr[...]

  • Page 12

    W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains [...]

  • Page 13

    It may take a long period of time for the system to detect an improperly installed or properly re-installed fuel filler cap depending on driving and fuel tank level conditions. Refer to Fuel filler cap in the Maintenance and Specifications chapter . Brake system warning light: To confirm the brake system warning light is functional, it will momenta[...]

  • Page 14

    Safety belt: Reminds you to fasten your safety belt. A BeltMinder 威 chime will also sound to remind you to fasten your safety belt. Refer to the Seating and safety restraints chapter to activate/deactivate the BeltMinder 威 chime feature, Low tire pressure warning: Illuminates when your tire pressure is low . If the light remains on at start up [...]

  • Page 15

    Low fuel: Illuminates when the fuel level in the fuel tank is at or near empty (refer to Fuel gauge in this chapter). Door ajar: Illuminates when the ignition is in the ON position and any door is open. Overdrive off (if equipped): Illuminates when the overdrive function of the transmission has been turned off, refer to the Driving chapter . If the[...]

  • Page 16

    High beams: Illuminates when the high beam headlamps are turned on. Key-in-ignition warning chime: Sounds when the key is left in the ignition in the OFF/LOCK or ACCESSORY position and the driver’ s door is opened. Headlamps on warning chime: Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) a[...]

  • Page 17

    Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. Never remove the coolant r[...]

  • Page 18

    Fuel gauge: Indicates approximately how much fuel is left in the fuel tank (when the ignition is in the ON position). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. Proper gauge indication requires the ignition to be in the OFF or ACCESSORY position during refueling, otherwise correct fuel indication after refueling c[...]

  • Page 19

    AUDIO SYSTEMS AM/FM stereo (if equipped) Display preference: Y ou can select Clock mode, which displays the time, or Frequency mode, which displays the current radio frequency , to appear in the radio display . Press CLK repeatedly to toggle between Clock and Frequency modes. If clock mode is selected and a radio function is pressed (i.e. SEEK, TUN[...]

  • Page 20

    T o set the display mode: Press repeatedly to toggle between Clock mode and frequency mode. 3. AUDIO: Press AUDIO repeatedly to toggle through the following modes and use / to make adjustments in those modes. Bass: Press AUDIO to decrease/increase the bass setting. T reble: Press AUDIO to decrease/increase the treble setting. Balance: Press AUDIO t[...]

  • Page 21

    AM/FM stereo single CD system (if equipped) 1. CD eject: Press to eject the CD. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINS is displayed. Press MENU to adjust the hours/minutes. Press CLK to display the time when the ignition is off. 3. MUTE: Press to mute the playing media. Press again to return to the playing media. 4. MENU: Press [...]

  • Page 22

    Autoset: Press MENU to set the strongest local radio stations for AM/FM1/FM2 without losing your original manually set preset stations. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Bass: Press ME[...]

  • Page 23

    11. SEEK/TRACK: Press to access the previous/next ( / ) strong station. In CD mode, press to advance to the previous/next ( / ) track. 12. SCAN: Press to toggle between SCAN ON and SCAN OFF . When activated, the system scans up through and plays a brief sampling of available radio stations or CD tracks. Press again to stop. 13. AM/FM: Press to sele[...]

  • Page 24

    AM/FM stereo single CD/MP3 Satellite Compatible system (if equipped) 1. CD eject: Press to eject the CD/MP3. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINS is displayed. Press MENU to adjust the hours/minutes. Press CLK to display the time when the ignition is off. 3. MUTE: Press to mute the playing media. Press again to return to the p[...]

  • Page 25

    CA TEGOR Y (Satellite Radio if equipped): Press MENU until the currently active category appears in the display (CA TEGORY ALL). In CA TEGORY ALL, press / to scroll through the list of available Sirius Categories (Pop, Rock, News, etc.) Press SEEK or SCAN to select the channels within each category . After a category is selected, press SEEK to sear[...]

  • Page 26

    In CA TEGORY ALL, press / to scroll through the list of available Sirius channel Categories (Pop, Rock, News, etc.). Refer to Category Mode under Menu for further information. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability . 6. SHUFF (Shuffle): Press to play the current CD/MP3 [...]

  • Page 27

    In Satellite Radio mode (if equipped), press SEEK to seek to the previous/next channel. If a specific category is selected, (Jazz, Rock, News, etc.), press SEEK to seek to the previous/next channel in the selected category . Press and hold SEEK to fast seek through the previous /next channels. In TEXT MODE, press SEEK to view the previous/additiona[...]

  • Page 28

    15. ON/OFF/V olume: Press to turn ON/OFF . T urn to increase/decrease volume. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. 16. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already present in the system, the dis[...]

  • Page 29

    Premium and Audiophile In-dash CD6/MP3 disc Pioneer audio systems (if equipped) 1. AM/FM: Press to select AM/FM1/FM2 frequency bands. 2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already in the system, the disc will start playing. 3. EJ (CD eject): T o eject an individual CD/MP3, press the eject control and select the correct slot number by pr[...]

  • Page 30

    6. MENU: Press MENU repeatedly to toggle through the following modes and use / to make adjustment in those modes. Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press MENU to access. Use MENU to set. When the six strongest stations are filled, the station stor[...]

  • Page 31

    10. Compression: In CD/MP3 modes, press to bring loud and soft passages together for a more consistent listening level. 11. REPEA T : Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEA T again to deactivate. 12. FF (Fast forward): Press to manually advance in a CD/MP3 track. 13. REW (Rewi[...]

  • Page 32

    CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs only . Due to technical incompatibility , certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels [...]

  • Page 33

    3. AUX: Press AUX to cycle through SA T1, SA T2, SA T3 (Satellite radio modes, if equipped) and LINE IN (Auxiliary audio mode, if equipped). T o return to radio mode, press AM/FM. Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability . 4. EJ (CD eject): T o eject an individual CD/MP3,[...]

  • Page 34

    Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press MENU to access. Use MENU to set. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one [...]

  • Page 35

    10. COMP (Compression): In CD/MP3 modes, press to bring loud and soft passages together for a more consistent listening level. 11. REPEA T : Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEA T again to deactivate. 12. FF (Fast forward): Press to manually advance in a CD/MP3 track. 13. RE[...]

  • Page 36

    In TEXT MODE, press SEEK to view the previous/additional display text. In CA TEGORY ALL, press TUNE to select a category . In CA TEGORY MODE, press SEEK to select a channel within that category . Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability . 16. TEXT/SCAN: In radio and CD mo[...]

  • Page 37

    19. CD slot: Insert a CD/MP3, label side up. CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs only . Due to technical incompatibility , certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, a[...]

  • Page 38

    2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already present in the system, the disc will begin play . 3. CLK (Clock): Press CLK until SELECT HOUR/SELECT MINUTE is displayed. Press TUNE ( / )t o adjust the hours/minutes. Press CLK to display the time when the ignition is off. 4. TUNE: In radio mode, press to manually go up or down the radio fr[...]

  • Page 39

    TREB (treble): Press TUNE to decrease/increase the treble levels. BAL (Balance): Press TUNE to adjust the audio between the left and right speakers. F ADE: Press TUNE to adjust the audio between the front and rear speakers. Next/previous directory: In MP3 mode, press TUNE to go to the previous/next directory . Flat file/directory mode: In MP3 mode,[...]

  • Page 40

    14. MUTE: Press to mute the playing media. Press again to return to the playing media. 15. REW (rewind): Press to manually reverse a CD/MP3 track. 16. SEEK: In radio, CD and MP3 flat file mode, press / to access the previous/next strong station or track. In MP3 directory mode, press to select the next/previous track in the current directory . 17. A[...]

  • Page 41

    Tremor IV CD/MP3 Satellite Compatible audio system (if equipped) 1. EJ (CD eject): T o eject an individual CD/MP3, press the eject control and select the correct slot number by pressing the corresponding memory preset. Press and hold to eject all loaded CD/MP3s. 2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already present in the system, the di[...]

  • Page 42

    4. TUNE: In radio mode, press to manually go up or down the radio frequency , or to access another CD. Also use in menu mode to select various settings. In CA TEGORY ALL, press / to scroll through the list of available Sirius channel Categories (Pop, Rock, News, etc.). Refer to Category Mode under Menu for further information. Satellite radio is av[...]

  • Page 43

    BASS: Press TUNE to decrease/increase the bass levels. TREB (treble): Press TUNE to decrease/increase the treble levels. BAL (Balance): Press TUNE to adjust the audio between the left and right speakers. F ADE: Press TUNE to adjust the audio between the front and rear speakers. Next/previous directory: In MP3 mode, press TUNE to go to the previous/[...]

  • Page 44

    Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability . 10. REPEA T : Press to repeat the current CD/MP3 track. The selection will repeat continuously until deactivated. Press REPEA T again to deactivate. 11. FF (fast forward): Press to manually advance in a CD/MP3 track. 12. Memory p[...]

  • Page 45

    In TEXT MODE, press SEEK to view the previous/additional display text. In CA TEGORY ALL, press TUNE to select a category . In CA TEGORY MODE, press SEEK to select a channel within that category . Satellite radio is available only with a valid SIRIUS subscription. Check with your authorized dealer for availability . 16. AM/FM: Press to select AM/FM1[...]

  • Page 46

    Auxiliary input jack (if equipped) Y our vehicle may be equipped with an Auxiliary Input Jack (AIJ) which allows you to plug and play auxiliary audio devices, located in one of two places. Press AUX repeatedly on your audio system to access AIJ mode. When LINE IN appears in the display , plug in your auxiliary audio device. Use the controls on your[...]

  • Page 47

    CD/CD player care Do: • Handle discs by their edges only . Never touch the playing surface. • Inspect discs before playing. Clean only with an approved CD cleaner and wipe from the center out. Don’t: • Expose discs to direct sunlight or heat sources for extended periods of time. • Clean using a circular motion. CD units are designed to pl[...]

  • Page 48

    Satellite radio reception factors: T o receive the satellite signal, your vehicle has been equipped with a satellite radio antenna located on the roof of your vehicle. The vehicle roof provides the best location for an unobstructed, open view of the sky , a requirement of a satellite radio system. Like AM/FM, there are several factors that can affe[...]

  • Page 49

    Radio Display Condition Action Required ACQUIRING Radio requires more than two seconds to produce audio for the selected channel. No action required. This message should disappear shortly . SA T F AUL T Internal module or system failure present. If this message does not clear within a short period of time, or with an ignition key cycle, your receiv[...]

  • Page 50

    Radio Display Condition Action Required NO TEXT Song title information not available. Song title information not available at this time on this channel. The system is working properly . NO TEXT Category information not available. Category information not available at this time on this channel. The system is working properly . NO SIGNAL Loss of sign[...]

  • Page 51

    HEATER ONLY SYSTEM (IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in the vehicle. 2. T emperature selection: Controls the temperature of the airflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control. : Distributes outs[...]

  • Page 52

    4. Direct the outer instrument panel vents towards the side windows. T o increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop. MANUAL HEATING AND AIR CONDITIONING S[...]

  • Page 53

    Operating tips • T o reduce fog build up on the windshield during humid weather , place the air flow selector in the position. • T o reduce humidity build up inside the vehicle: do not drive with the air flow selector in the OFF position. • Under normal weather conditions, do not leave the air flow selector in MAX A/C or OFF when the vehicle [...]

  • Page 54

    HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the headlamps on. Foglamp control (if equipped) The foglamps can be turned on when the headlamp control is in the or position and the high beams are not turned on. Pull headlamp control towards you to turn foglamps [...]

  • Page 55

    Flash to pass Pull toward you slightly to activate and release to deactivate. Daytime running lamps (DRL) (if equipped) The daytime running light system turns the headlamps on, with a reduced light output. T o activate: • the ignition must be in the ON position and • the headlamp system is in the OFF position or parking lamp position. Always re[...]

  • Page 56

    AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed before leaving the assembly plant. If your vehicle is involved in an accident or if you have problems fixing the alignment of your headlamps, have them checked by a qualified service technician. Headlamp aim adjustment The headlamps are designed to be mechanically aimed, but can [...]

  • Page 57

    5. Locate the vertical adjuster for each headlamp. Adjust the aim by turning the adjuster control either clockwise (to adjust down) or counterclockwise (to adjust up). 6. In addition to the horizontal line marked in step 2, a pair of vertical lines (5) must be marked at the center line of the headlamps on the wall or screen. 7. On the wall or scree[...]

  • Page 58

    INTERIOR LAMPS Courtesy/reading lamps (if equipped) The courtesy lamp lights when: • any door is opened. • the instrument panel dimmer switch is held up until the courtesy lamps come on. • the remote entry controls are pressed and the ignition is OFF . BULB REPLACEMENT Headlamp Condensation The headlamps are vented to equalize pressure. When [...]

  • Page 59

    Function Number of bulbs T rade number Rear license plate lamps 2 194 Backup lamps 2 3155 or 3156 (STX) Dome lamp 1 912 Map/dome-SuperCab (if equipped) 2 904 Map/dome-Regular Cab (if equipped) 1 904 All replacement bulbs are clear in color except where noted. T o replace all instrument panel lights - see your authorized dealer . Replacing the inter[...]

  • Page 60

    4. Remove the bulb retaining ring by rotating it counterclockwise and slide the ring off the plastic base. 5. Remove the old bulb by pulling it straight out of the lamp. Handle a halogen headlamp bulb carefully and keep out of children’ s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause[...]

  • Page 61

    3. Remove screw(s) from lamp assembly and disengage lamp assembly (it has a snap fit). 4. Rotate bulb socket counterclockwise and remove from lamp assembly . 5. Carefully pull bulb straight out of socket and push in the new bulb. 6. Install the bulb socket in lamp assembly by turning clockwise. Install the new bulb in reverse order . 2007 Ranger (r[...]

  • Page 62

    Replacing tail lamp/backup lamp bulbs 1. Make sure the headlamp switch is in the OFF position and the open the tailgate to expose the lamp assemblies. 2. Remove the four screws and the lamp assembly from vehicle. 3. Rotate bulb socket counterclockwise turn and remove from lamp assembly . 4. Carefully pull the bulb straight out of the socket Install[...]

  • Page 63

    Replacing foglamp bulbs (if equipped) 1. Make sure the headlamp switch is in the OFF position and remove the bulb socket from the foglamp by turning counterclockwise. 2. Disconnect the electrical connector . Install the new bulb in reverse order . Replacing high-mount brakelamp bulb 1. Make sure the headlamp switch is in the OFF position and remove[...]

  • Page 64

    MULTI-FUNCTION LEVER W indshield wiper: Rotate the end of the control away from you to increase the speed of the wipers (from desired interval to low or high speed position); rotate towards you to decrease the speed of the wipers. W indshield washer: Push the end of the stalk: • briefly: causes a single swipe of the wipers without washer fluid. ?[...]

  • Page 65

    TILT STEERING WHEEL (IF EQUIPPED) T o adjust the steering wheel: 1. Pull and hold the steering wheel release control toward you. 2. Move the steering wheel up or down until you find the desired location. 3. Release the steering wheel release control. This will lock the steering wheel in position. Never adjust the steering wheel when the vehicle is [...]

  • Page 66

    The auxiliary power points are located on the instrument panel. Do not use the power point for operating the cigarette lighter element (if equipped). T o prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12 VDC/180W . Refer to Passenger Compartment Fuse Panel in the Roadside Emergencies chapter for fuse r[...]

  • Page 67

    One touch down Allows the driver’ s window to open fully without holding the control down. Press completely down on AUTO and release quickly . Press again to stop. EXTERIOR MIRRORS Power side view mirrors (if equipped) T o adjust your mirrors: 1. Select to adjust the left mirror or to adjust the right mirror . 2. Move the control in the direction[...]

  • Page 68

    Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed. 3. Press the SET + control and release it. 4. T ake your foot off the accelerator pedal. 5. The indicator light on the instrument cluster will turn on. No[...]

  • Page 69

    Resuming a set speed Press the RES (resume) control and release it. This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 30 mph (48 km/h). Increasing speed while using speed control There are three ways to set a higher speed: • Press and hold the SET + contro[...]

  • Page 70

    Turning of f speed control There are two ways to turn off the speed control: • Press the speed control OFF control. • T urn OFF the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. CARGO AREA FEATURES Cargo area shade (if equipped) Y our vehicle may be equipped with notches in t[...]

  • Page 71

    4. Evenly push down on the extender and push the round knobs in on each side locking it in place. Green markings on the shaft indicate the locked position. The locking clip screws below the middle bar can be tightened counterclockwise for extra security . Note: If the red marking on the shaft is visible, the bed extender is not locked or properly s[...]

  • Page 72

    KEYS The key operates all locks on your vehicle. Y ou should always carry a second key with you in a safe place in case you require it in an emergency . If your vehicle is equipped with the SecuriLock 娂 Passive Anti-theft system, your keys are coded to your vehicle; using a non-coded key will not permit your vehicle to start. If you lose your dea[...]

  • Page 73

    Y our vehicle is equipped with a remote entry system which allows you to: • unlock the vehicle doors without a key . • lock all the vehicle doors without a key . • activate the personal alarm. If there are problems with the remote entry system, make sure to take ALL remote entry transmitters with you to your authorized dealer in order to aid [...]

  • Page 74

    T o replace the battery: 1. T wist a thin coin between the two halves of the remote entry transmitter near the key ring. DO NOT T AKE THE RUBBER COVER AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE REMOTE ENTRY TRANSMITTER. 2. Do not wipe off any grease on the battery terminals on the back surface of the circuit board. 3. Remove the old battery . N[...]

  • Page 75

    Note: Ensure the brake pedal is not depressed during this sequence. T o reprogram the remote entry transmitters: 1. Ensure the vehicle is electronically unlocked. 2. Put the key in the ignition. 3. T urn the key from the 2 (LOCK) position to 3 (OFF). 4. Cycle eight times rapidly (within 10 seconds) between the 3 (OFF) position and 4 (ON). Note: The[...]

  • Page 76

    The battery saver will shut off the interior lamps after several minutes if they are left on accidentally . SECURILOCK 姟 PASSIVE ANTI-THEFT SYSTEM (IF EQUIPPED) SecuriLock 娂 passive anti-theft system is an engine immobilization system. This system is designed to help prevent the engine from being started unless a coded key programmed to your ve[...]

  • Page 77

    V ehicles without the SecuriLock 娂 Passive Anti-theft system behave as follows: • When the ignition is in the 1 (OFF/LOCK) position, the indicator will not flash. • When the igniton is in the 3 (ON) position, the indicator will glow for 3 seconds to indicate the engine is enabled. Replacement keys If your keys are lost or stolen and you don?[...]

  • Page 78

    1. Insert a previously programmed coded key into the ignition. 2. T urn the ignition from the 3 (OFF) position to the 4 (ON) position. Keep the ignition in the 4 (ON) position for at least one second, but no more than 10 seconds. 3. T urn the ignition to the 3 (OFF) position, and remove the coded key from the ignition. 4. W ithin ten seconds of rem[...]

  • Page 79

    SEATING Notes: Reclining the seatback can cause an occupant to slide under the seat’ s safety belt, resulting in severe personal injuries in the event of a collision. Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. Before returning the seatback to its original position, make sure that cargo [...]

  • Page 80

    Lift the release bar to move seat forward or backward. Ensure that the seat is locked into place. Pull lever located at the side of the seat cushion up to adjust seatback. 60/40 seat (if equipped) T o gain access to the storage compartment in your armrest (if equipped), lift the latch to open lid. The 60/40 seat cupholder (if equipped) is detachabl[...]

  • Page 81

    Using the manual lumbar support (if equipped) T urn the lumbar support control clockwise to increase firmness. T urn the lumbar support control counterclockwise to increase softness. Passenger side rear access Pull up on the recliner handle. The seat will lean forward. Lift the release bar to move the seat forward to access the rear area of the cab[...]

  • Page 82

    Center facing jump seat (4 door SuperCab) (if equipped) T o open, pull seat assembly down, then raise seatback. T o stow the seat, fold seat back down and raise seat assembly to the fully upright position. Do not install a child seat in the center facing jump seats as there are no child restraints recommended for use in this seating position. Boost[...]

  • Page 83

    • Restraint system warning light and back-up tone. • The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor , and indicator lights. How does the Personal Safety System 姟 work? The Personal Safety System 娂 can adapt the deployment strategy of your vehicl[...]

  • Page 84

    Front passenger sensing system For airbags to do their job they must inflate with great force, and this force can pose a potentially deadly risk to occupants that are very close to the airbag when it begins to inflate. For some occupants, like infants in rear -facing child seats, this occurs because they are initially sitting very close to the airb[...]

  • Page 85

    Front outboard safety belt pretensioners The safety belt pretensioners at the front outboard seating positions are designed to tighten the safety belts firmly against the occupant’ s body during frontal collisions, and in side collisions and rollovers when the vehicle is equipped with the Safety Canopy 娂 system. This helps increase the effectiv[...]

  • Page 86

    Safety restraints precautions Always drive and ride with your seatback upright and the lap belt snug and low across the hips. T o reduce the risk of injury , make sure children sit where they can be properly restrained. Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from inju[...]

  • Page 87

    Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. T o unfasten, push the release button and remove the tongue from the buckle. Lap belts Adjusting the [...]

  • Page 88

    Shorten and fasten the belt when not in use. For the rear jump seat, shorten and fold the belt into the seat when not in use. Energy Management Feature • This vehicle has a safety belt system with an energy management feature at the front outboard seating positions to help further reduce the risk of injury in the event of a head-on collision. •[...]

  • Page 89

    How to use the automatic locking mode • Buckle the combination lap and shoulder belt. • Grasp the shoulder portion and pull downward until the entire belt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the a[...]

  • Page 90

    BEL T AND RETRACTOR ASSEMBL Y MUST BE REPLACED if the safety belt assembly “automatic locking retractor” feature or any other safety belt function is not operating properly when checked authorized dealer . Failure to replace the Belt and Retractor assembly could increase the risk of injury in collisions. Safety belt pretensioner Y our vehicle i[...]

  • Page 91

    • 2–door SuperCab T o lower the shoulder belt height, push the button and slide the height adjuster down. T o raise the height of the shoulder belt, push the button and slide the height adjuster up. Pull down on the height adjuster to make sure it is locked in place. Position the safety belt height adjusters so that the belt rests across the mi[...]

  • Page 92

    equipped), child safety seat tether anchors, and attaching hardware, should be inspected after a collision. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced. However , if the collision was minor and an authorized dealer finds that the belts do not show damage and continue to operat[...]

  • Page 93

    BeltMinder 姞 The BeltMinder 威 feature is a supplemental warning to the safety belt warning function. This feature provides additional reminders by intermittently sounding a chime and illuminating the safety belt warning light in the instrument cluster when the driver’ s and front passenger’ s safety belt is unbuckled. The BeltMinder 威 fea[...]

  • Page 94

    If... Then... The driver’ s or front passenger’ s safety belt becomes unbuckled for approximately 1 minute while the vehicle is traveling at least 3 mph (5 km/h) and more than 1-2 minutes have elapsed since the ignition switch has been turned to ON... The BeltMinder 威 feature is activated - the safety belt warning light illuminates and the wa[...]

  • Page 95

    Reasons given... Consider ... “T raffic is light” Nearly 1 of 2 deaths occur in single-vehicle crashes, many when no other vehicles are around. “Belts wrinkle my clothes” Possibly , but a serious crash can do much more than wrinkle your clothes, particularly if you are unbelted. “The people I’m with don’t wear belts” Set the example[...]

  • Page 96

    Read Step s1-4t horoughly before proceeding with the deactivation/activation programming procedure. Note : The driver and front passenger BeltMinder 威 features must be disabled/enabled separately . Both cannot be disable/enabled during the same key cycle. The driver and front passenger BeltMinder 威 features can be deactivated/activated by perfo[...]

  • Page 97

    • This will enable the BeltMinder 威 feature for that seating position if it is currently disabled. As confirmation, the safety belt warning light will flash 4 times per second for 3 seconds, followed by 3 seconds with the light off, then followed by the safety belt warning light flashing 4 times per second for 3 seconds again. AIRBAG SUPPLEMENT[...]

  • Page 98

    Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries. Airbags DO NOT inflate slowly or gently and the risk of injury from a deploying airbag is greatest close to the trim covering the [...]

  • Page 99

    Do not put anything on or over the airbag module. Placing objects on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury . Do not attempt to service, repair , or modify the Airbag Supplemental Restraint System or its fuses. See your authorized dealer . The front pas[...]

  • Page 100

    Airbags can kill or injure a child in a child seat. NEVER place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back. Booster seats must be installed only in seating positions equipped with a combination lap/shoulder belt. T o reduce the risk of injury [...]

  • Page 101

    The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the airbag. Small amo[...]

  • Page 102

    A difficulty with the system is indicated by one or more of the following: • The readiness lights will either flash or stay lit. • The readiness lights will not illuminate immediately after ignition is turned on. • A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If a[...]

  • Page 103

    Even with Advanced Restraints Systems, children 12 and under should be properly restrained in the back seat (if equipped). When the front passenger seat is occupied and the sensing system has turned off the passenger’ s frontal air bag, the ⬙ passenger air bag off ⬙ or ⬙ pass air bag off ⬙ indicator will light and stay lit to remind you t[...]

  • Page 104

    Occupant Pass Airbag Off Indicator Lamp Passenger Airbag Empty seat Unlit Disabled Small child in child safety seat or booster Lit Disabled Small child with safety belt buckled or unbuckled Lit Disabled Adult Unlit Enabled After all occupants have adjusted their seats and put on safety belts, it’ s very important that they continue to sit upright[...]

  • Page 105

    The front passenger sensing system may detect small or medium objects placed on the seat cushion. For most objects that are in the front passenger seat, the passenger airbag will be disabled. Even though the passenger airbag is disabled, the ⬙ pass airbag off ⬙ light may or may not be illuminated according to the table below . Objects Pass Airb[...]

  • Page 106

    Children and safety belts If the child is the proper size, restrain the child in a safety seat. Children who are too large for child safety seats (as specified by your child safety seat manufacturer) should always wear safety belts. Follow all the important safety restraint and airbag precautions that apply to adult passengers in your vehicle. If t[...]

  • Page 107

    Booster seats should be used until you can answer YES to ALL of these questions: • Can the child sit all the way back against the vehicle seat back with knees bent comfortably at the edge of the seat without slouching? • Does the lap belt rest low across the hips? • Is the shoulder belt centered on the shoulder and chest? • Can the child st[...]

  • Page 108

    Children and booster seats vary widely in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder . The drawings below compare the ideal fit (center) to a shoulder belt uncomfortably cl[...]

  • Page 109

    Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a collision. SAFETY SEATS FOR CHILDREN Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of the child. Carefully follow all of the manufacturer’ s instructions with the sa[...]

  • Page 110

    Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position with a tether anchor . For more information on top tether straps, refer to Attaching child safety seats with tether straps. in this chapter . Carefully follow all of the manufacturer’ s instructions included with the safet[...]

  • Page 111

    3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until y[...]

  • Page 112

    7. Pull the lap belt portion across the child seat toward the buckle and pull up on the shoulder belt while pushing down with knee on the child seat. 8. Allow the safety belt to retract to remove any slack in the belt. 9. Before placing the child in the seat, forcibly tilt the seat forward and back to make sure the seat is securely held in place. T[...]

  • Page 113

    The tether strap anchors in your vehicle are in the following positions (shown from top view): • Bucket seats • 60/40 seats Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor . 1. Position the child safety seat on the front sea[...]

  • Page 114

    3. Locate the correct anchor for the selected seating position. The tether anchor is located on the rear lower portion of the passenger seat. 4. Clip the tether strap to the anchor . 2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus) Seating and Safety Restraints 114[...]

  • Page 115

    Center seating location When installing a child safety seat in the front center position, route the tether strap over the center arm rest and clip it to the center anchor . If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision. 5. Install the child safety seat tightly using the s[...]

  • Page 116

    NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road. Utility vehicles and trucks are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to per[...]

  • Page 117

    Power is supplied to all four wheels through a transfer case or power transfer unit. 4WD vehicles allow you to select different drive modes as necessary . Information on transfer case operation and shifting procedures can be found in the Driving chapter . Information on transfer case maintenance can be found in the Maintenance and Specifications ch[...]

  • Page 118

    • Narrower — to provide greater maneuverability in tight spaces, particularly in off-road use. As a result of the above dimensional differences, SUV’ s and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versa[...]

  • Page 119

    T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the ac[...]

  • Page 120

    Glossary of tire terminology • T ire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry . • T ire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of man[...]

  • Page 121

    Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required. At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped). Inflate all tires to the inflation pressure recommended[...]

  • Page 122

    When weather temperature changes occur , tire inflation pressures also change. A 10° F (6° C) temperature drop can cause a corresponding drop of 1 psi (7 kPa) in inflation pressure. Check your tire pressures frequently and adjust them to the proper pressure which can be found on the Safety Compliance Certification Label or T ire Label. T o check [...]

  • Page 123

    TIRE CARE Inspecting your tires Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the tread grooves. Check for holes or cuts that may permit air leakage from the tire and make necessary repairs. Also inspect the tire sidewalls for cracking, cuts, bruises and oth[...]

  • Page 124

    Age T ires degrade over time, even when they are not being used. It is recommended that tires generally be replaced after 6 years of normal service. Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. Y ou should replace the spare tire when you replace the other road tires due to the aging of the spare [...]

  • Page 125

    When mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again. If a pressure in excess of the maximum pressure indicated is required, the[...]

  • Page 126

    • Do not run over curbs or hit the tire against a curb when parking If your vehicle is stuck in snow , mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. Do not spin the wheels at over 35 mph (56 km/h). The tires may fail and injure[...]

  • Page 127

    Tire rotation Rotating your tires at the recommended interval (as indicated in the scheduled maintenance information that comes with your vehicle) will help your tires wear more evenly , providing better tire performance and longer tire life. Unless otherwise specified, rotate the tires approximately every 5,000 miles (8,000 km). • Rear Wheel Dri[...]

  • Page 128

    INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT T ire Identification Number for safety standard certificatio[...]

  • Page 129

    7. H: Indicates the tire’ s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time under a standard condition of load and inflation pressure. The tires on your vehicle may operate at different conditions for load and inflation pressure. These speed ratings may need to be adjusted for[...]

  • Page 130

    10. T ire Ply Composition and Material Used: Indicates the number of plies or the number of layers of rubber -coated fabric in the tire tread and sidewall. T ire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester , and others. 11. Maximum Load: Indicates the maximum load in kilogra[...]

  • Page 131

    Additional information contained on the tire sidewall for “L T” type tires “L T” type tires have some additional information beyond those of “P” type tires; these differences are described below: 1. LT: Indicates a tire, designated by the T ire and Rim Association (T&RA), that is intended for service on light trucks. 2. Load Range/L[...]

  • Page 132

    Information on “T” type tires “T” type tires have some additional information beyond those of “P” type tires; these differences are described below: T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example. 1. T: Indicates a type of tire, designated by the T ire and Rim A[...]

  • Page 133

    TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard[...]

  • Page 134

    Changing tires with TPMS Each road tire is equipped with a tire pressure sensor fastened to the inside rim of the wheel. The pressure sensor is covered by the tire and is not visible unless the tire is removed. The pressure sensor is located opposite (180 degrees) from the valve stem. Care must be taken when changing the tire to avoid damaging the [...]

  • Page 135

    When you believe your system is not operating properly The main function of the T ire Pressure Monitoring System is to warn you when your tires need air . It can also warn you in the event the system is no longer capable of functioning as intended. Please refer to the following chart for information concerning your T ire Pressure Monitoring System:[...]

  • Page 136

    Low T ire Pressure W arning Light Possible cause Customer Action Required Flashing W arning Light Spare tire in use Y our temporary spare tire is in use. Repair the damaged road wheel and re-mount it on the vehicle to restore system functionality . For a description of how the system functions under these conditions, refer to When your temporary sp[...]

  • Page 137

    any tire is under -inflated, carefully drive the vehicle to the nearest location where air can be added to the tires. Inflate all the tires to the recommended inflation pressure. SNOW TIRES AND CHAINS Driving too fast for conditions creates the possibility of loss of vehicle control. Driving at very high speeds for extended periods of time may resu[...]

  • Page 138

    your vehicle, familiarize yourself with the following terms for determining your vehicle’ s weight ratings, with or without a trailer , from the vehicle’ s T ire Label or Safety Compliance Certification Label: Base Curb W eight – is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passeng[...]

  • Page 139

    Example only: Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. 2007 R[...]

  • Page 140

    GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label located on the B-Pillar or the edge of the driver’ s door . The total load on each axle must never exceed its GA WR. Note: For trailer towing information r[...]

  • Page 141

    GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers – that the vehicle can handle without risking damage. (Important: The towing [...]

  • Page 142

    Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury . Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’ s placard. 2. Determine the combined weight of the driv[...]

  • Page 143

    transport the cement to your home? If you and your friend each weigh 220 lb. (99 kg), the calculation would be: 1400 – (2 x 220) – (12 x 100) = 1400 – 440 – 1200 = – 240 lb. No, you do not have enough cargo capacity to carry that much weight. In metric units, the calculation would be: 635 kg — (2 x 99 kg) — (12 x 45 kg) = 635 — 198 [...]

  • Page 144

    4x2 w/manual transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) Regular Cab w/6’ box 2.3L All 4800 (2177) 1580 (716) Equal to frontal area of vehicle 3.0L* All 6000 (2722) 2640 (1198) 50 (4.64) 3.0L* Edge All 6000 (2722) 2500 (1134) 50 (4.64) Regular Cab w/7?[...]

  • Page 145

    4x2 w/manual transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) For definition of terms used in this table see V ehicle Loading earlier in this chapter . T o determine maximum trailer weight designed for your particular vehicle, see V ehicle Loading earlier in [...]

  • Page 146

    4x4 w/manual transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) SuperCab 4.0L (without FX4 package) All 7000 (3175) 3080 (1397) 50 (4.64) 4.0L (with FX4 package) All 7000 (3175) 2740 (1243) 50 (4.64) For high altitude operation, reduce GCW by 2% per 1,000 ft. ([...]

  • Page 147

    4x2 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) Regular Cab w/6’ box 2.3L All 5500 (2495) 2240 (1016) Equal to frontal area of vehicle 3.0L* All 6000 (2722) 2600 (1179) 50 (4.64) 3.0L* Edge All 6000 (2722) 2420 (1098) 50 (4.64) Regular Cab [...]

  • Page 148

    4x2 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) For definition of terms used in this table see V ehicle Loading earlier in this chapter . T o determine maximum trailer weight designed for your particular vehicle, see V ehicle loading earlier [...]

  • Page 149

    4x4 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) SuperCab 4.0L (without FX4 package) All 9500 (4309) 5560 (2522) 50 (4.64) 4.0L (with FX4 package) All 9500 (4309) 5220 (2368 ) 50 (4.64) For high altitude operation, reduce GCW by 2% per 1,000 f[...]

  • Page 150

    Do not exceed the GVWR or the GA WR specified on the certification label. T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury . Preparing to tow Use the proper equ[...]

  • Page 151

    Do not connect a trailer’ s hydraulic brake system directly to your vehicle’ s brake system. Y our vehicle may not have enough braking power and your chances of having a collision greatly increase. The braking system of the tow vehicle is rated for operation at the GVWR not GCWR. T railer lamps T railer lamps are required on most towed vehicles[...]

  • Page 152

    T railer tow connector Color Function Comment 1. Dark Green T railer right-hand turn signal Circuit activated when brake pedal is depressed or when ignition is on and right-hand turn signal is applied. 2. Y ellow T railer left-hand turn signal Circuit activated when brake pedal is depressed or when ignition is on and left-hand turn signal is applie[...]

  • Page 153

    Servicing after towing If you tow a trailer for long distances, your vehicle will require more frequent service intervals. Refer to your scheduled maintenance information for more information. T railer towing tips • Practice turning, stopping and backing up before starting on a trip to get the feel of the vehicle trailer combination. When turning[...]

  • Page 154

    Exceeding these limits may allow water to enter vehicle components: • causing internal damage to the components. • affecting driveability , emissions and reliability . Replace the rear axle lubricant any time the axle has been submerged in water . Rear axle lubricant quantities are not to be checked or changed unless a leak is suspected or repa[...]

  • Page 155

    V ehicles equipped with an automatic transmission 4x2 and 4x4 vehicles with an automatic transmission follow these guidelines for recreational towing: • Release the parking brake. • T urn the key in the ignition to the OFF/UNLOCKED position. • Place the transmission in N (Neutral). • Do not exceed a distance of 50 miles (80 km). • Do not [...]

  • Page 156

    STARTING Positions of the ignition 1. ACCESSORY , allows the electrical accessories such as the radio to operate while the engine is not running. 2. LOCK, locks the steering wheel, automatic transmission gearshift lever and allows key removal. For vehicles equipped with a manual transmission, you must depress the ignition release lever to release t[...]

  • Page 157

    Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. Do not park, idle, or drive your vehicle in dry grass or other dry ground cover . The emission system heats up the engine compartment and exhaust system, which can start a fire. Do not start your vehi[...]

  • Page 158

    If starting a vehicle with an automatic transmission: • Make sure the parking brake is set. • Make sure the gearshift is in P (Park). If starting a vehicle with a manual transmission: 1. Make sure the parking brake is set. 2. Push the clutch pedal to the floor . • T urn the key to 4 (ON) without turning the key to 5 (ST ART). Some warning lig[...]

  • Page 159

    Starting the engine 1. T urn the key to 4 (ON) without turning the key to 5 (ST ART). If there is difficulty in turning the key , rotate the steering wheel until the key turns freely . 2. T urn the key to 5 (ST ART), then release the key as soon as the engine starts. Excessive cranking could damage the starter . Note: If the engine does not start w[...]

  • Page 160

    T o reduce the risk of electrical shock, do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters. BRAKES Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and should be inspected by an authorized dealer . If the vehi[...]

  • Page 161

    Even when the ABS is disabled, normal braking is still effective. (If your BRAKE warning lamp illuminates with the parking brake released, have your brake system serviced immediately .) Parking brake T o set the parking brake (1), press the parking brake pedal down until the pedal stops. The BRAKE warning lamp will illuminate and will remain illumi[...]

  • Page 162

    • Do not fill the power steering pump reservoir above the MAX mark on the reservoir , as this may result in leaks from the reservoir . If the power steering system breaks down (or if the engine is turned off), you can steer the vehicle manually , but it takes more effort. If the steering wanders or pulls, check for: • an improperly inflated tir[...]

  • Page 163

    Loaded vehicles, with a higher center of gravity , may handle differently than unloaded vehicles. Extra precautions such as slower speeds and increased stopping distance should be taken when driving a heavily loaded vehicle. AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Brake-shift interlock This vehicle is equipped with a brake-shift interlock fe[...]

  • Page 164

    If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly . See your authorized dealer . Driving with a 5–speed automatic transmission (if equipped) This vehicle is equipped with an adaptive T ransmission Shift Strategy . Adaptive Shift Strategy offers the optimal transmission o[...]

  • Page 165

    N (Neutral) W ith the gearshift lever in N (Neutral), the vehicle can be started and is free to roll. Hold the brake pedal down while in this position. D (Drive) with Overdrive The normal driving position for the best fuel economy . T ransmission operates in gears one through five. D (Drive) without Overdrive D (Drive) with Overdrive can be deactiv[...]

  • Page 166

    MANUAL TRANSMISSION OPERATION (IF EQUIPPED) Using the clutch The manual transmission has a starter interlock that prevents cranking the engine unless the clutch pedal is fully depressed. T o start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to the floor , then put the gearshift lever in the neutral position. [...]

  • Page 167

    Recommended shift speeds Downshift according to the following charts for your specific engine/drivetrain combination: Upshifts when accelerating (for best fuel economy) Shift from: T ransfer case position (if equipped) 2H or 4H 4L 1 - 2 10 mph (14 km/h) 4 mph (5 km/h) 2 - 3 22 mph (32 km/h) 9 mph (11 km/h) 3 - 4 33 mph (50 km/h) 13 mph (19 km/h) 4 [...]

  • Page 168

    3. T urn the ignition off. Do not park your vehicle in Neutral, it may move unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully . Removing the key T urn the ignition off, push the release lever (located above the ignition), then turn the key toward you and remove the key . If your vehicle gets stuck in mud or snow If[...]

  • Page 169

    4WD system indicator lights • 4x4 - Momentarily illuminates when the vehicle is started. Illuminates when 4H (4WD High) is engaged. • 4x4 LOW – Momentarily illuminates when the vehicle is started. Illuminates when 4L (4WD Low) is engaged. Using the electronic shift 4WD system 2H (2WD High) - Power to the rear wheels only; used for street and [...]

  • Page 170

    2. Depress the brake 3. On vehicles equipped with an automatic transmission, place the transmission in N (Neutral); on vehicles equipped with a manual transmission, depress the clutch. 4. Move the 4WD control to the desired position. • If shifting into 4L (4WD Low), wait for the 4WD LOW light in the instrument cluster to turn on indicating the sh[...]

  • Page 171

    • Be extremely careful when driving on pavement made slippery by loose sand, water , gravel, snow or ice. If your vehicle goes off the edge of the pavement • If your vehicle goes off the edge of the pavement, slow down, but avoid severe brake application, ease the vehicle back onto the pavement only after reducing your speed. Do not turn the st[...]

  • Page 172

    Emergency maneuvers • In an unavoidable emergency situation where a sudden sharp turn must be made, remember to avoid “over -driving” your vehicle, i.e., turn the steering wheel only as rapidly and as far as required to avoid the emergency . Excessive steering will result in less vehicle control, not more. Additionally , smooth variations of [...]

  • Page 173

    Power is supplied to all four wheels through a transfer case. On 4WD vehicles, the transfer case allows you to select 4WD when necessary . Information on transfer case operation and shifting procedures can be found in the Driving chapter . Information on transfer case maintenance can be found in the Maintenance and Specifications chapter . Y ou sho[...]

  • Page 174

    Mud and water If you must drive through high water , drive slowly . T raction or brake capability may be limited. When driving through water , determine the depth; avoid water higher than the bottom of the hubs (if possible) and proceed slowly . If the ignition system gets wet, the vehicle may stall. Once through water , always try the brakes. W et[...]

  • Page 175

    Driving on hilly or sloping terrain Although natural obstacles may make it necessary to travel diagonally up or down a hill or steep incline, you should always try to drive straight up or straight down. A void driving crosswise or turning on steep slopes or hills . A danger lies in losing traction, slipping sideways and possibly rolling over . When[...]

  • Page 176

    Driving on snow and ice 4WD vehicles have advantages over 2WD vehicles in snow and ice but can skid like any other vehicle. Should you start to slide while driving on snowy or icy roads, turn the steering wheel in the direction of the slide until you regain control. A void sudden applications of power and quick changes of direction on snow and ice.[...]

  • Page 177

    DRIVING THROUGH WATER If driving through deep or standing water is unavoidable, proceed very slowly especially when the depth is not known. Never drive through water that is higher than the bottom of the wheel rims (for cars) or the bottom of the hubs (for trucks). When driving through water , traction or brake capability may be limited. Also, wate[...]

  • Page 178

    ROADSIDE ASSISTANCE Getting roadside assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New V ehicle Limited W arranty . The service is available: • 24–hours, seven days a week • for the New V ehicle Limited W arranty perio[...]

  • Page 179

    Canadian customers refer to your Owner Information Guide for information on: • coverage period • exact fuel amounts • towing of your disabled vehicle • emergency travel expense reimbursement • travel planning benefits Using roadside assistance Complete the roadside assistance identification card and place it in your wallet for quick refer[...]

  • Page 180

    HAZARD FLASHER The hazard flasher is located on the steering column, just behind the steering wheel. The hazard flashers will operate when the ignition is in any position or if the key is not in the ignition. Push in the flasher control and all front and rear direction signals will flash. Press the flasher control again to turn them off. Use it whe[...]

  • Page 181

    The fuel pump shut-off switch is located under the right-hand side of the glove box, just above the carpet. T o reset the switch: 1. T urn the ignition OFF . 2. Check the fuel system for leaks. 3. If no leaks are apparent, reset the switch by pushing in on the reset button. 4. T urn the ignition ON. 5. W ait a few seconds and return the key to OFF [...]

  • Page 182

    Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A T an T an — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Y ellow Y ellow Y ellow Blu[...]

  • Page 183

    The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 1 5A Instrument panel dimmer switch 2 10A T railer tow park lamps 3 10A Right low beam headlamp 4 10A Left low beam headlamp 5 30A W indshield wipers/washer 6 10A Radio (RUN/ACCY) 7 5A Not used (spare) 8 10A Restraints Control Module (RC[...]

  • Page 184

    Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 10 10A Cluster (RUN/ST ART), 4x4 module (RUN/ST ART) 11 10A Smart Junction Box (SJB) (Logic power) 12 15A Audiophile subwoofer amplifier , Satellite radio 13 15A Horn, Interior lamps 14 15A High beam headlamp, High beam indicator (cluster) 15 — One-touch down relay 1[...]

  • Page 185

    Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 30 5A Power mirrors 31 20A Front park lamps, Rear park lamps, License plate lamps, Dimmer switch, T railer tow park lamps 32 5A Brake switch (logic) 33 5A Instrument cluster battery feed (B+) 34 20A Power point 35 15A Power locks Power distribution box The power distri[...]

  • Page 186

    If the battery has been disconnected and reconnected, refer to the Battery section of the Maintenance and Specifications chapter . 2.3L engine (if equipped) The high-current fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 1 40A** Interior fuse panel (SJB) 2 — Not used 3 40A** Interior fuse panel [...]

  • Page 187

    Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 12 — Not used 13 30A** Blower motor (climate control) 14 — Not used 15 — Not used 16 — Not used 17 40A** Anti-lock Brake System (ABS) module 18 — Not used 19 20A** Engine fan 20 — Not used 21 10A* PCM keep alive power , Canister purge valve solenoid 22 — Not used 2[...]

  • Page 188

    Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 40 — Not used 41 10A* Automatic transmission 42 7.5A* T railer tow (left turn) 43 20A* Engine fan relay coil, A/C relay coil, IAC, MAFS, HEGO, CMS, VMV solenoid 44 15A* Ignition coil, Capacitor 45A — W iper HI/LO relay 45B — W iper Park/Run relay 46A — Fuel pump relay , [...]

  • Page 189

    3.0L and 4.0L engines (if equipped) The high-current fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 1 40A** Interior fuse panel (SJB) 2 40A** Amplifier (T remor audio system only) 3 40A** Interior fuse panel (SJB) 4 — Not used 5 50A** Interior fuse panel (SJB) 6 — Not used 7 40A** Starter sole[...]

  • Page 190

    Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 14 — Not used 15 — Not used 16 — Not used 17 40A** Anti-lock Brake System (ABS) module 18 — Not used 19 — Not used 20 — Not used 21 10A* PCM keep alive power , Canister purge valve solenoid 22 — Not used 23 30A* Fuel pump motor , Fuel injectors 24 — Not used 25 1[...]

  • Page 191

    Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 42 7.5A* T railer tow (left turn) 43 20A* A/C relay coil, IAC, MAFS, HEGO, CMS, VMV solenoid, EGR solenoid, Heated PCV 44 15A* Ignition coil, Capacitor 45A — W iper HI/LO relay 45B — W iper Park/Run relay 46A — A/C clutch solenoid 46B — W asher pump relay 47 — PCM rela[...]

  • Page 192

    The use of tire sealants may damage your tires. The use of tire sealants may also damage your T ire Pressure Monitoring System and should not be used. Refer to T ire Pressure Monitoring System (TPMS) in the T ires, Wheels and Loading chapter for important information. If the tire pressure monitor sensor becomes damaged, it will no longer function. [...]

  • Page 193

    • T ry to repair the dissimilar spare tire Use of one of the dissimilar spare tires listed above at any one wheel location can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capabili[...]

  • Page 194

    Drive cautiously when using a full-size dissimilar spare tire/wheel and seek service as soon as possible. Full-size Matching Spare Tire/Wheel Information This spare tire/wheel will match the road tire/wheel. When driving with the full size matching spare tire/wheel, do not exceed 70 mph (113 km/h). It is intended for temporary use only . This means[...]

  • Page 195

    Removing the spare tire 1. Assemble the jack handle to the lug wrench as shown in the illustrations. When connecting the jack handle, assemble the following: • one handle extension and one typical extension. T o assemble, slide parts together . T o disconnect, depress button and pull apart. • one wheel nut wrench. Depress button and slide toget[...]

  • Page 196

    3. Insert the square end of the jack handle into the rear access hole located just above the rear bumper and below the tailgate. Forward motion will stop and resistance to turning will be felt when properly engaged. 4. T urn the handle counterclockwise until tire is lowered to the ground and the cable is slightly slack. 5. W ith the spare tire on t[...]

  • Page 197

    1. Park on a level surface, activate hazard flashers and place gearshift lever in P (Park) (automatic transmission) or 1 (First) (manual transmission). 2. Set the parking brake and turn engine OFF . 3. Block the diagonally opposite wheel. 4. Insert tapered end of the lug wrench behind hub caps and twist them off. 5. Loosen each wheel lug nut one-ha[...]

  • Page 198

    • Rear T o lessen the risk of personal injury , do not put any part of your body under the vehicle while changing a tire. Do not start the engine when your vehicle is on the jack. The jack is only meant for changing the tire. • Never use the differential as a jacking point. 7. Remove the wheel lug nuts with the lug wrench. 8. Replace the flat t[...]

  • Page 199

    Stowing the flat/spare tire Note: Failure to follow spare tire stowage instructions may result in failure of cable or loss of spare tire. 1. Lay the tire on the ground with the valve stem facing up. 2. Slide the wheel partially under the vehicle and install the wire and retainer through the center of the wheel. 3. T urn the jack handle clockwise un[...]

  • Page 200

    When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Ensure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. In[...]

  • Page 201

    4. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure that vent caps are tight and level. 5. T urn the heater fan on in both vehicles to protect any electrical surges. T urn all other accessories off. Connecting the jumper cables 1. Connect the positive (+) jumper cable to the positive (+) te[...]

  • Page 202

    3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery . 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’ s engine, away from the battery and the carburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding [...]

  • Page 203

    Jump starting 1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. Removing the jumper cables Remove the jumper cables in the rev[...]

  • Page 204

    3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’ s battery . 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’ s battery . After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle c[...]

  • Page 205

    WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . It is recommended that your vehicle be towed with a wheel lift or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not approved a sl[...]

  • Page 206

    GETTING THE SERVICES YOU NEED At home Y ou must take your Ford vehicle to an authorized dealer for warranty repairs. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repair[...]

  • Page 207

    In Canada: Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 1-800-565-3673 (FORD) www .ford.ca If you own a Lincoln vehicle and are away from home when your vehicle needs service, or if you need more help than the authorized dealer could provide, after following the steps described above, c[...]

  • Page 208

    In some states (in the U.S.) you must directly notify Ford in writing before pursuing remedies under your state’ s warranty laws. Ford is also allowed a final repair attempt in some states. In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss W arranty Act, or to the extent a[...]

  • Page 209

    THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Y our satisfaction is important to Ford Motor Company and to your dealer . Experience has shown that our customers have been very successful in achieving satisfaction by following the three-step procedure outlined on the front page of the W arranty Guide. However , if your warranty conc[...]

  • Page 210

    authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory , Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor V ehicle Arbitration Plan (CAMV AP). The CAMV AP program is a straight-forward and relatively speedy alternative to resolve a disag[...]

  • Page 211

    GETTING ASSIST ANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country , contact the appropriate foreign embassy or consulate. These officials can inform you of local vehicle registration regulations and where to find unleaded fuel. If you cannot find unleaded fuel or can only get fuel with an anti-knock index lower than[...]

  • Page 212

    For a free publication catalog, order toll free: 1-800-782-4356 Monday-Friday 8:00 a.m. - 6:00 p.m. EST Helm, Incorporated can also be reached by their website: www .helminc.com. (Items in this catalog may be purchased by credit card, check or money order .) Obtaining a French owner ’ s guide French Owner’ s Guides can be obtained from your aut[...]

  • Page 213

    W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft Detail W ash (ZC-3–A), which is available from your authorized dealer . • Never use strong household detergents or soap, such as dish washing or laundry liquid. These products can discolor and spot painted surfaces. • Ne[...]

  • Page 214

    W AXING Applying Motorcraft Paint Sealant (ZC-45) to your vehicle every six months will assist in reducing minor scratches and paint damage. • W ash the vehicle first. • Do not use waxes that contain abrasives; use Motorcraft Premium Liquid W ax (ZC-53-A), which is available from your authorized dealer , or an equivalent quality product. • Do[...]

  • Page 215

    ENGINE Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • T ake care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with cold water to avoid cracking the engine bl[...]

  • Page 216

    • 3.0L V6 engine • 4.0L SOHC V6 engine • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products are available from your authorized dealer . • For routine cleaning, use Motorcraft Detail W[...]

  • Page 217

    WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should be cleaned regularly . If the wipers do not wipe properly , substances on the vehicle’ s glass or the wiper blades may be the cause. These may include hot wax treatments used by commercial car washes, water repellant coatings, tree sap, or other organic con[...]

  • Page 218

    • Be certain to wash or wipe your hands clean if you have been in contact with certain products such as insect repellent and suntan lotion in order to avoid possible damage to the interior painted surfaces. INTERIOR For fabric, carpets, cloth seats and safety belts: • Remove dust and loose dirt with a vacuum cleaner . • Remove light stains an[...]

  • Page 219

    FORD AND LINCOLN MERCURY CAR CARE PRODUCTS Y our Ford or Lincoln Mercury authorized dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle. Eac[...]

  • Page 220

    SERVICE RECOMMENDATIONS T o help you service your vehicle we provide scheduled maintenance information which makes tracking routine service easy . If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Check your W arranty Guide/Owner Information Guide to find out which parts and services [...]

  • Page 221

    Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. • Manual transmission: 1. Set the parking brake, depress the clutch and place the gearshift in N (Neutral). 2. Block the wheels. T o reduce the risk of vehicle damage and/or personal burn injuries do not start your engine wi[...]

  • Page 222

    IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.3L I4 engine 1. W indshield washer fluid reservoir 2. Engine coolant reservoir 3. Engine oil dipstick 4. T ransmission fluid dipstick (automatic transmission) 5. Engine oil filler cap 6. Brake fluid reservoir 7. Power distribution box 8. Clutch fluid reservoir (manual transmission) 9. Battery 10. P[...]

  • Page 223

    3.0L V6 engine 1. Engine coolant reservoir 2. W indshield washer fluid reservoir 3. Engine oil filler cap 4. Automatic transmission fluid dipstick (if equipped) 5. Engine oil dipstick 6. Brake fluid reservoir 7. Power distribution box 8. Clutch fluid reservoir (if equipped) 9. Battery 10. Power steering fluid reservoir 11. Air filter assembly 2007 [...]

  • Page 224

    4.0L SOHC V6 engine 1. W indshield washer fluid reservoir 2. Automatic transmission fluid dipstick (if equipped) 3. Engine oil filler cap 4. Engine oil dipstick 5. Brake fluid reservoir 6. Power distribution box 7. Clutch fluid reservoir (if equipped) 8. Battery 9. Power steering fluid reservoir 10. Air filter assembly 11. Engine coolant reservoir [...]

  • Page 225

    WINDSHIELD WASHER FLUID • 2.3L engine • 3.0L and 4.0L engines Add fluid to fill the reservoir if the level is low . In very cold weather , do not fill the reservoir completely . Only use a washer fluid that meets Ford specification WSB-M8B16-A2. Do not use any special washer fluid such as windshield water repellent type fluid or bug wash. They [...]

  • Page 226

    If you operate your vehicle in temperatures below 40° F (4.5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident. Note: Do not put washer fluid in the engine coolant reservoir . W asher fluid p[...]

  • Page 227

    4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil level indicator (dipstick). • 2.3L I4 engine • 3.0L V6 engine MAX MIN 2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications 227[...]

  • Page 228

    • 4.0L SOHC V6 engine 6. W ipe the indicator clean. Insert the indicator fully , then remove it again. • If the oil level is between the two holes or between the MIN and MAX marks (depending on application), the oil level is acceptable, DO NOT ADD OIL. • If the oil level is below the lower hole or the MIN mark, add enough oil to raise the lev[...]

  • Page 229

    • 3.0L V6 engine • 4.0L SOHC V6 engine • Oil levels above the upper hole or MAX mark may cause engine damage. Some oil must be removed from the engine by an authorized dealer . 7. Put the indicator back in and ensure it is fully seated. 2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications 229[...]

  • Page 230

    Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter . 2. If the engine oil level is not within the normal range, add only certified engine oil of the recommended viscosity . Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 3. Recheck the engine oil l[...]

  • Page 231

    Do not use supplemental engine oil additives, cleaners or other engine treatments. They are unnecessary and could lead to engine damage that is not covered by Ford warranty . Change your engine oil according to the appropriate schedule listed in the scheduled maintenance information. Ford production and aftermarket (Motorcraft) oil filters are desi[...]

  • Page 232

    that does not meet Ford material and design specifications, start-up engine noises or knock may be experienced. It is recommended you use the appropriate Motorcraft oil filter (or another brand meeting Ford specifications) for your engine application. BATTERY Y our vehicle is equipped with a Motorcraft maintenance-free battery which normally does n[...]

  • Page 233

    When lifting a plastic-cased battery , excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery . Lift the battery with a battery carrier or with your hands on opposite corners. Keep batteries out of reach of children. Batteries contain sulfuric acid. A [...]

  • Page 234

    If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected. • Always dispose of automotive batteries in a responsible manner . Follow your local authorized standards for disposal. Call your local authorized recycling center to find out more about [...]

  • Page 235

    • 2.3L engines • 3.0L and 4.0L engines 2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications 235[...]

  • Page 236

    When the engine is cold, check the level of the engine coolant in the reservoir . • The engine coolant should be at the “FULL COLD” level or within the “COLD FILL RANGE” as listed on the engine coolant reservoir (depending upon application). • Refer to the scheduled maintenance information for service interval schedules. • Be sure to [...]

  • Page 237

    • Do not add/mix an orange-colored, extended life coolant such as Motorcraft Specialty Orange Engine Coolant, meeting Ford specification WSS-M97B44-D, with the factory-filled coolant. Mixing Motorcraft Specialty Orange Engine Coolant or any orange-colored extended life product with your factory filled coolant can result in degraded corrosion prot[...]

  • Page 238

    5. Fill the coolant reservoir slowly with the proper coolant mixture (see above), to within the “COLD FILL RANGE” or the “FULL COLD” level on the reservoir . If you removed the radiator cap in an overflow system, fill the radiator until the coolant is visible and radiator is almost full. 6. Replace the cap. T urn until tightly installed. (C[...]

  • Page 239

    • NEVER increase the coolant concentration above 60%. • Increased engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage. • Refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate freeze protec[...]

  • Page 240

    The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap. Otherwise, fuel may spray out and injure you or others. If you do not use the proper fuel filler cap, excessive vacuum in the fuel tank may damage the fuel system or cause[...]

  • Page 241

    • Be particularly careful if you are taking “Antabuse” or other forms of disulfiram for the treatment of alcoholism. Breathing gasoline vapors, or skin contact could cause an adverse reaction. In sensitive individuals, serious personal injury or sickness may result. If fuel is splashed on the skin, promptly wash skin thoroughly with soap and [...]

  • Page 242

    Fuel Filler Cap Y our vehicle is equipped with a 1/4 turn fuel filler cap, which requires the handle to be rotated 1/4 of a turn for removal or installation. When fueling your vehicle: 1. T urn the engine off. 2. Carefully turn the fuel filler cap counterclockwise 1/4 of a turn until it releases from the fuel filler pipe. 3. Carefully hang the cap [...]

  • Page 243

    If you do not use the proper fuel filler cap, excessive vacuum in the fuel tank may damage the fuel system or cause the fuel cap to disengage in a collision, which may result in possible personal injury . Choosing the right fuel Use only UNLEADED fuel or UNLEADED fuel blended with a maximum of 10% ethyl alcohol. Y our vehicle was not designed to ru[...]

  • Page 244

    Octane recommendations Y our vehicle is designed to use “Regular” unleaded gasoline with pump (R+M)/2 octane rating of 87. W e do not recommend the use of gasolines labeled as “Regular” that are sold with octane ratings of 86 or lower in high altitude areas. Do not be concerned if your engine sometimes knocks lightly . However , if it knock[...]

  • Page 245

    • The indicator may come on. For more information on the “check engine” or the “service engine soon” indicator , refer to W arning lights and chimes in the Instrument Cluster chapter . ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Y our best source of information about actual fuel economy is you, the driver . Y ou must gather infor[...]

  • Page 246

    • Have the vehicle loading and distribution the same every time. Y our results will be most accurate if your filling method is consistent. Calculating fuel economy 1. Fill the fuel tank completely and record the initial odometer reading (in miles or kilometers). 2. Each time you fill the tank, record the amount of fuel added (in gallons or liters[...]

  • Page 247

    • Revving the engine before turning it off may reduce fuel economy . • Using the air conditioner or defroster may reduce fuel economy . • Y ou may want to turn off the speed control in hilly terrain if unnecessary shifting between third and fourth gear occurs. Unnecessary shifting of this type could result in reduced fuel economy . • W armi[...]

  • Page 248

    • Four -wheel-drive operation (if equipped) is less fuel efficient than two-wheel-drive operation. • Close windows for high speed driving. EP A window sticker Every new vehicle should have the EP A window sticker . Contact your authorized dealer if the window sticker is not supplied with your vehicle. The EP A window sticker should be your guid[...]

  • Page 249

    Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. Do not make any unauthorized changes to your vehicle or engine. By law , vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove [...]

  • Page 250

    Readiness for Inspection/Maintenance (I/M) testing In some localities, it may be a legal requirement to pass an I/M test of the on-board diagnostics system. If the indicator is on, refer to the description in the W arning lights and chimes section of the Instrument Cluster chapter . Y our vehicle may not pass the I/M test with the indicator on. If [...]

  • Page 251

    POWER STEERING FLUID • 2.3L I4 engine • 3.0L V6 engine • 4.0L V6 engine Check the power steering fluid. Refer to the scheduled maintenance guide for the service interval schedules. If adding fluid is necessary , use only MERCON 威 AT F . D O N O T O V E R F I L L P O W E R S T E E R I N G F L U I D 2007 Ranger (ran) Owners Guide (post-2002-f[...]

  • Page 252

    1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will be near the center of the normal area between H and C). 2. While the engine idles, turn the steering wheel left and right several times. 3. T urn the engine off. 4. Check the fluid level in the reservoir . It should [...]

  • Page 253

    1. Clean the reservoir cap before removal to prevent dirt and water from entering the reservoir . 2. Remove cap and rubber diaphragm from reservoir . 3. Add fluid until the level reaches the step in the reservoir . 4. Reinstall rubber diaphragm and cap onto reservoir . T RANSMISSION FLUID Checking automatic transmission fluid • Refer to scheduled[...]

  • Page 254

    9. If necessary , add fluid in 1/2 pint (250ml) increments through the filler tube until the level is correct at normal operating temperatures. Refer to the Maintenance product specifications and capacities section in this chapter for the correct fluid type. The use of any other non-approved fluid may cause internal transmission damage. 10. Fluid c[...]

  • Page 255

    3. Fluid level should be at the bottom of the opening. 4. Add enough fluid through the filler opening so that the fluid level is at the bottom of the opening. 5. Install and tighten the fill plug securely . Use only fluid that meets Ford specifications. Refer to the Maintenance product specifications and capacities section in this chapter . T RANSF[...]

  • Page 256

    DRIVELINE UNIVERSAL JOINT AND SLIP YOKE Y our vehicle may be equipped with universal joints that require lubrication. Refer to the scheduled maintenance information for maintenance intervals. If the original universal joints are replaced with universal joints equipped with grease fittings, lubrication will also be necessary . AIR FILTER Refer to sc[...]

  • Page 257

    6. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover . This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 7. Replace the air filter housing cover and secure the clamps. 8. Replace the air inlet tube and secure the clamp. Note: [...]

  • Page 258

    2 For spark plug replacement, see your authorized dealer . Refer to scheduled maintenance information for the appropriate intervals for changing the spark plugs. Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft or equivalent replacement parts. The customer warranty may be void [...]

  • Page 259

    MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES Item Capacity Ford part name or equivalent Ford part number / Ford specification Brake fluid and clutch fluid (if equipped) Fill to line or step (for clutch) on reservoir Motorcraft High Performance DOT 3 Motor V ehicle Brake Fluid PM-1 or PM-1-C / ESA-M6C25-A or WSS-M6C62-A Door weather strips — [...]

  • Page 260

    Item Capacity Ford part name or equivalent Ford part number / Ford specification Engine coolant (2.3L engine with manual transmission) 10.5 quarts (10.0L) Motorcraft Premium Gold Engine Coolant (yellow-colored) 1 VC-7-B / WSS-M97B51-A1 Engine coolant (2.3L engine with automatic transmission) 10.2 quarts (9.7L) Engine coolant (3.0L engine with manua[...]

  • Page 261

    Item Capacity Ford part name or equivalent Ford part number / Ford specification Engine oil (4.0L engine) 5.0 quarts (4.7L) Motorcraft SAE 5W -30 Premium Synthetic Blend Motor Oil (US) Motorcraft SAE 5W -30 Super Premium Motor Oil (Canada) 2 XO-5W30-QSP (US) CXO-5W30-LSP12 (Canada) / WSS-M2C929-A and API Certification Mark Automatic T ransmission f[...]

  • Page 262

    Item Capacity Ford part name or equivalent Ford part number / Ford specification Rear axle fluid –All (except FX4 Level II) 5.0-5.3 pints (2.4-2.5L) 6,7,8 Motorcraft SAE 80W -90 Premium Rear Axle Lubricant XY -80W90-QL / WSP-M2C197-A Rear axle fluid (FX4 Level II only) 5.25-5.5 pints (2.5-2.6L) 6,7,8 Motorcraft SAE 75W -140 Synthetic Rear Axle Lu[...]

  • Page 263

    1 Add the coolant type originally equipped in your vehicle. 2 Use of synthetic or synthetic blend motor oil is not mandatory . Engine oil need only have the API Certification mark and meet the requirements of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (2.3L and 3.0L). 3 Indicates only approximate dry-fill capacity . Some applications ma[...]

  • Page 264

    ENGINE DATA Engine 2.3L I4 engine 3.0L V6 engine 4.0L V6 engine Cubic inches 138 182 245 Required fuel 87 octane 87 octane 87 octane Firing order 1-3-4-2 1-4-2-5-3-6 1-4-2-5-3-6 Ignition system EDIS EDIS EDIS Spark plug gap 0.049–0.053 inch (1.25–1.35 mm) 0.051–0.057 inch (1.29–1.45 mm) 0.052–0.056 inch (1.32–1.42 mm) Compression ratio [...]

  • Page 265

    • 3.0L V6 Engine with A/C • 4.0L V6 Engine 2007 Ranger (ran) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications 265[...]

  • Page 266

    IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway T raffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label is located on the structur[...]

  • Page 267

    The V ehicle Identification Number (VIN) contains the following information: 1. W orld manufacturer identifier 2. Brake system / Gross V ehicle W eight Rating (GVWR) / Restraint System 3. V ehicle line, series, body type 4. Engine type 5. Check digit 6. Model year 7. Assembly plant 8. Production sequence number T RANSMISSION/T RANSAXLE CODE DESIGNA[...]

  • Page 268

    GENUINE FORD ACCESSORIES FOR YOUR VEHICLE A wide selection of Genuine Ford Accessories are available for your vehicle through your local Ford or Ford of Canada dealer . These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of your veh[...]

  • Page 269

    Interior style Consoles Electrochromatic compass/temperature interior mirrors Floor mats Lifestyle Ash cup / smoker’ s package Bedliners and bedmats Cargo organization and management T owing mirrors T railer hitches, wiring harnesses and accessories T ripT unes 娂 Peace of mind Mobile-ease 娂 hands-free communication system Remote start V ehicl[...]

  • Page 270

    • Mobile communications systems may harm the operation of your vehicle, particularly if they are not properly designed for automotive use. • T o avoid interference with other vehicle functions, such as anti-lock braking systems, amateur radio users who install radios and antennas onto their vehicle should not locate the Amateur Radio Antennas i[...]

  • Page 271

    A Air cleaner filter ............... 256–257 Airbag supplemental restraint system .................... 97–98 and child safety seats .............. 99 description ................................ 98 disposal .................................... 102 driver airbag ......................98, 100 indicator light .........................101 operation[...]

  • Page 272

    Clock adjust AM/FM Stereo ........................... 19 AM/FM stereo CD ............... 21, 24 CD-MP3 ...............................38, 41 Premium AM/FM stereo CD6/MP3 ............................. 29, 33 Clutch fluid .......................................... 252 operation while driving .......... 166 recommended shift speeds .... 167 Console ..[...]

  • Page 273

    calculating fuel economy ....... 245 cap ........................................... 242 capacity ................................... 259 choosing the right fuel ........... 243 comparisons with EP A fuel economy estimates .................248 detergent in fuel ..................... 243 filling your vehicle with fuel .................. 239, 242, 24[...]

  • Page 274

    Lane change indicator (see T urn signal) ........................ 57 Lights, warning and indicator .... 12 anti-lock brakes (ABS) .......... 160 Load limits ................................. 137 Loading instructions ................. 143 Locks doors .......................................... 72 Lubricant specifications ........... 259 Lug nuts ....[...]

  • Page 275

    Safety Compliance Certification Label .................... 266 Satellite Radio Information ........ 47 Seat belts (see Safety restraints) ........................ 82 Seats ............................................ 79 child safety seats .................... 109 SecuriLock passive anti-theft system .......................................... 76 Ser[...]

  • Page 276

    W W arning lights (see Lights) ....... 12 W asher fluid ..............................225 W ater , Driving through ............. 177 W indows power ......................................... 66 W indshield washer fluid and wipers .......................................... 64 checking and adding fluid ..... 225 replacing wiper blades ........... 226 [...]

  • Page 277

    277[...]

  • Page 278

    278[...]

  • Page 279

    279[...]

  • Page 280

    280[...]