Flanders 11255 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Flanders 11255, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Flanders 11255 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Flanders 11255. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Flanders 11255 should contain:
- informations concerning technical data of Flanders 11255
- name of the manufacturer and a year of construction of the Flanders 11255 item
- rules of operation, control and maintenance of the Flanders 11255 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Flanders 11255 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Flanders 11255, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Flanders service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Flanders 11255.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Flanders 11255 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    the filter and hvac store[...]

  • Page 2

    PRODUCT CA T ALOG AMKT0103a Supersedes all previous catalogs. For f ast, efficient ser vice, contact us today at 1-800-347-2220 and look for us on the internet at www . precisionaire.com the filter and hvac store[...]

  • Page 3

    Dear Customer , As a global leader in the production of high quality air filtration prod- ucts, Flanders Corporation continues to develop new innovations in design, new methods of manufacturing and a higher level of cus- tomer service to provide you, our representative and distributor , with the most comprehensive product offering available to the [...]

  • Page 4

    Disposable Air Filters The widest selection of disposable panels you will find anywhere. Spun glass and synthetic media...all stan- dard sizes and almost any “special” size. Polyester Panels, Links, Sleeves High grade polyester synthetic fiber media in a variety of styles, heat sealed onto heavy wire frames. Paint Booth Products A complete line[...]

  • Page 5

    Medium & High Efficiency Extended Surface T ype Filters Huge line of “bag” filters in all of the most popular sizes and efficiencies, plus our new XDH bag which holds up to twice as much dust as ordinary bags. Metal W ashable Filters Rugged metal filters for a variety of applications. T op quality materials and workmanship. Gas Phase and Od[...]

  • Page 6

    Disposable Air Filters: P age HD Industrial Grade Heavy Duty Box Frame, Spun Glass or Synthetic Media . . . . . . . . . . . . . . . . .8 EZ Flow and EZ Flow II Continuous Filament Spun Glass, Box Frame . . . . . . . . . . . . . . . . . . . . . . .10 Pinch Frame Framed Polyester Media with Metal on One Side . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 7

    7 HEP A and 95DOP Filters Alpha 95 95% DOP Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Alpha Cell HEP A Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Alpha 2000 High Capacity HEP A Filters . . . . . . . . . . . . . . . . . . . . [...]

  • Page 8

    8 HD Industrial Grade Heavy Duty Disposable P anel Filters Spun Glass Media - Model 10255.xxxxxx Synthetic Media - Model 11255.xxxxxx Grille Sizes - Model 10355.xxxxx General Flanders HD Industrial Grade filters are designed for use in any application where disposable panel filters are recommended. They can be relied upon for superior performance s[...]

  • Page 9

    9 Standard Sizes Performance Data - HD Industrial Grade T ypical initial (clean) pressure drop at nominal cfm is 0.07 in. w.g. for 1 in. filters and 0.10 in. w.g. for 2 in. filters. Recommended final resistance is 0.50 in. w .g., but the system design may dictate a lower change out point. 1.0 General 1.1Disposable filters shall be Model HD Industri[...]

  • Page 10

    10 EZ Flow and EZ Flow II Disposable P anel Air Filters EZ Flow - Model 10155.xxxxxx EZFlow II - Model 10055.xxxxxx General EZ Flow and EZ Flow II disposable filters are designed for protection of furnace and central air units in residential and light commercial applica- tions. Construction of both models is identical except for the media retainer [...]

  • Page 11

    Nominal Size (inch) Actual Size H x W x D (in) cfm @ 300 fpm Standard Carton Qty . W eight per Carton (lbs.) 10x10x1 9-7/8 x 9-7/8 x 3/4 208 12 3.3 10x20x1 9-7/8 x 19-7/8 x 3/4 417 12 5.6 10x24x1 9-7/8 x 23-7/8 x 3/4 500 12 6.1 10x25x1 9-7/8 x 24-7/8 x 3/4 521 12 6.5 10x30x1 9-7/8 x 29-7/8 x 3/4 625 12 5.8 12x12x1 1 1 -7/8 x 1 1 -7/8 x 3/4 300 12 4[...]

  • Page 12

    12 Pinch Frame Disposable P anel Air Filters Model 11655.xxxxxx General The Flanders Pinch Frame disposable air filter pro- vides the user with a product of high quality and strength. Originally designed for light commercial and indus- trial applications, the Flanders Pinch Frame filter is an excellent choice for use in residential furnace systems.[...]

  • Page 13

    13 Nominal Size (inch) Actual Size H x W x D (inches) cfm @ 300 fpm Standard Carton Qty . W eight per Carton (lbs.) 10x20x1 9-7/8 x 19-7/8 x 7/8 420 12 4.0 10x24x1 9-7/8 x 23-7/8 x 7/8 500 12 5.0 10x30x1 9-7/8 x 29-7/8 x 7/8 620 12 5.5 12x20x1 1 1 -7/8 x 19-7/8 x 7/8 500 12 4.5 12x24x1 1 1 -7/8 x 23-7/8 x 7/8 600 12 5.0 12x25x1 1 1 -7/8 x 24-7/8 x [...]

  • Page 14

    Rugged, Heat-sealed,Construction Flanders Ring Panel and Cube filters are made by heat sealing layers of syn- thetic filtering media together over an interior , corrosion-resistant steel support frame. An overcut of media outside the seal- forms a built-in gasket (selvage) between the wire support frame and holding frame, which secures the filter a[...]

  • Page 15

    15 Series ST55-P olyester P anel Models ST55R-xxxx Ring Panel and ST55L-xxxx Link T wo-ply 1” nominal media construction using a 1/2” nominal white poly- ester on the upstream, followed by a 1/2” nominal green super tackified polyester downstream. Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL Link Panels are[...]

  • Page 16

    16 Paintbooth Filtration Downdraft Prep Station Crossdraft Flanders offers a wide variety of filtration products for downdraft and crossdraft paintbooths and prep sta- tions. For the most part, fitlration products required for all of these fall into three general categories which are color coded to the drawings at left which indicate their placemen[...]

  • Page 17

    17 SA600-G10 Diffusion Media for Air Intake Models SA600-xxx For downdrafts and prep stations. This filter pro- vides the highest level of protection against paint damaging particles available today . In addition to its leading reputation in filtering ability , the SA600- G10 is able to withstand high temperature applica- tions, up to 140 degrees C[...]

  • Page 18

    18 Series ST55 P anel for Air Intake Models ST55R-xxxx and ST55L-xxxx-xx The SERIES ST55 P ANEL, made in the USA, is an economical choice for crossdraft booths. The SERIES ST55 is made from two media pads. A metal support is dielectrically heat sealed in between the two media layers, providing support and rigidity . The first media layer is designe[...]

  • Page 19

    19 Series 331Y P A Models 331Y -xxx 22 gram Fiberglass Paint Arrestor for use in all booth types. Series 331Y is a high quality fiberglass media. Made with 22 grams of fiberglass per square foot, the Series 331Y is more efficient and holds more paint than many other fiberglass prod- ucts. It comes in 200 ft. rolls and is also available in pads for [...]

  • Page 20

    20 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 325T , which is 98% efficient, and the Series 425T which is 99% efficient. The exhaust cube filters have a larger surface area than a conventional flat pad. This increase in surface area reduces the restriction to airflow , and increases the paint hold- ing capacity[...]

  • Page 21

    21 port. The media overlaps the support, which pro- vides a gasketing effect reducing air bypass around the filter . A tackifier is applied in between the last two layers to stabilize any migrating particles and prevent the discharge of particles from the filter . The graduat- ed media design produces a superior dust holding capacity that will outl[...]

  • Page 22

    22 The filter media consists of 100% high bulk poly- ester fibers that are thermo-bonded with a fire retar- dant res” Support grilles of expanded metal are provided on both sides of the filter . The media pads and support grilles are continuously glued to the inside perimeter of the frame, resulting in excep- tional strength and rigidity . This d[...]

  • Page 23

    23 PS125-Bag Models125BAG-xxxxxx Scrim-Back polyester media bags as prefilter . PS125 Bags are made from a single denier poly- ester media that contains a scrim backing for extra rigidity . The PS125 Bags each contain a metal wire support and a 1” channel frame for easy placement. Prefilter bags have an ever-changing and diverse selection of type[...]

  • Page 24

    24 FP319A T wo-stage and Three-stage P aint Systems Pa intbooth Filtration P ads: FP319AxxxxP AD, Ring P anels: FP319A2020PRK, Cubes: FP319Axxxx , Bags: FP319Axxxxxxxx FP319A Chromate Recover y System The Flanders FP319A-Chromate Recovery System is offered in both two-stage and three-stage config- urations for aerospace overspray painting environ- [...]

  • Page 25

    25 1 2 3 Avg 1 2 3 Avg 1 2 3 Avg 3. Courtaulds yellow fuel tank coating (A) 513X390 base + (B) 910X624 activator - With a conventional air gun operating at 45 psi, with spray feed rate of 105 gr/min @ 120 fpm, initial pressure drop was .23” w .g. Running to final pressure drop at .82” w .g., average removal efficiency was measured at 99.35% eff[...]

  • Page 26

    26 Service Rolls Flanders Service Rolls air filtration media are man- ufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: (Models SGxxxxKK) This is a rigid, nominal[...]

  • Page 27

    T ypically , these are for Lennox type furnaces. ( Lennox is a brand name. It is used here for system identification only .) Hammock rolls are 20 foot rolls of media cut in various widths. In most cases, a sin- gle cut across the roll will produce a ready-to-use filter pad. Flanders hammock rolls are packaged in a handy carton that can be used as a[...]

  • Page 28

    28 Wide selection of media types Flanders offers a wide range of top quality air filtra- tion media available in bulk rolls and pads. Considering the unique characteristics of each offering, the user can get maximum value for filter dollar spent with relation to the intended use. Bulk media rolls are offered in selected slit widths with roll length[...]

  • Page 29

    29 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL the filter and hvac store[...]

  • Page 30

    30 Auto Rolls Automatic Roll Filter Replacement Flanders automatic roll replacements are furnished wound on spools or cores, ready for installation without modifica- tion or adaptors. A core selection guide is printed on the back of this sheet. Six-foot-long kraft paper leaders and trailers are secured to the ends of every roll. Each roll con- tain[...]

  • Page 31

    31 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL the filter and hvac store[...]

  • Page 32

    32 Important F eatures • Media maximizing v-pleat design • Expanded metal grid prevents media flutter while in operation • Diagonal and horizontal support members pro- vide frame strength • Filter media pack is sealed to eliminate air bypass • Average ASHRAE efficiency is 25-30% • Average arrestance is 90%-92% Pre Pleat 40 Extended Surf[...]

  • Page 33

    33 Expanded Metal Pleat Backing V -Pleat Design Double W all Construction 2-piece die-cut frame Diagonal grid supports for maximum strength Efficient High-Loft Media Principles of Operation Flanders’ v-pleat design insures that the greatest media area is exposed to the air flow to promote uniform dust loading. Competitive filters cannot maintain [...]

  • Page 34

    34 Capacities and Dimensions Notes: 1. PD represents clean pressure drop in inches w .g. The recommended final pressure drop for all models is 1.0 in. w .g. System design may dictate a lower change-out point. 2. Actual filter face size for 12 x 24 and 24 x 24 filters is 5/8 in. under on height and width. Actual face size on all other sizes is 1/2 i[...]

  • Page 35

    35 1.0 General 1.1 Medium efficiency filters shall be Pre Pleat 40 extended surface pleated filters as manufactured by Flanders.. 1.2 Filter sizes and capacities shall be as scheduled on the drawings. 1.3 Filters shall be UL 900 Class 1 or 2 listed. 2.0 Filter Construction 2.1 Filters shall be constructed of reinforced, non- woven cotton/synthetic [...]

  • Page 36

    36 Pre Pleat HV High V elocity and Gas T urbine Pleat Models 85455.xxxxxx General The Pre Pleat HV pleated filter from Flanders is designed to operate in high velocity and turbulent air applications where standard pleated filters have a tendency to fail. They are ideal for gas turbine and rotary machinery equipment or any area requiring a pleated f[...]

  • Page 37

    Depth Nominal Depth (inch) 10 x 10 x 1 210 0.15 347 0.38 1.6 10 x 20 x 1 417 0.15 694 0.38 3.2 12 x 20 x 1 500 0.15 833 0.38 3.8 12 x 24 x 1 600 0.15 1000 0.38 4.5 14 x 20 x 1 583 0.15 972 0.38 4.5 14 x 25 x 1 729 0.15 1215 0.38 5.3 15 x 20 x 1 625 0.15 1042 0.38 4.8 16 x 20 x 1 667 0.15 1 1 10 0.38 4.8 16 x 25 x 1 834 0.15 1390 0.38 6.1 20 x 20 x [...]

  • Page 38

    38 Pre Pleat 62R High Efficiency Pleated Filters Standard Capacity: 85655.xxxxxx High Capacity: 85755.xxxxxx Important F eatures • MERV 8 per ASHRAE Standard 52.2 •1 in., 2 in. or 4 in. depths • All standard sizes plus custom sizes • Standard and high capacity designs •U LC lass 2 listed Filtration for IAQ Flanders Pre Pleat 62R pleated p[...]

  • Page 39

    re Pleat 62RM1 1 pleated panel filter enables a significant upgrade in collection efficiency over existing MERV 8 products at the same resistance levels. From 30-35% to 60-65% average per Ashrae 52.1-1992 average dust spot efficiency at nearly the same pricing levels. Bi-component media: Our next-gener- ation ultra-high performance bi-component syn[...]

  • Page 40

    40 1.0 General 1.1 Air filters shall be Model Pre Pleat 62RM1 1 panel filers, as manufactured by Flanders. 2.0 Filter Construction 2.1 Eac h fi lte r s hall consist of an electrostatically charged synthetic only media, with corrosion- resistant expanded metal backing and moisture resistant enclosing frame. The filter shall be 1”, 2” or 4” nom[...]

  • Page 41

    41 Pre Pleat Class 1 UL 900 Class 1 Pleated Filter Standard Capacity: 85855.xxxxxx High Capacity: 85955.xxxxxx Important F eatures • UL 900 Class 1 for flammability • Easily disposable • Offered in all standard face sizes, 2” depth • High lofted glass pleated media • Nominal 50% ASHRAE efficiency • MERV 8 General This pleated air filt[...]

  • Page 42

    42 1.0 General 1.1 Medium efficiency UL Class 1 fire rated pleated filters shall be Pre Pleat Class 1 as manufactured by Flanders. 1.2 Filter sizes and capacities shall be scheduled on the drawings. 2.0 Filter Construction 2.1 Filter media shall be manufactured of a high loft- ed micro-fine media with a minimum efficiency of 50% per ASHRAE Standard[...]

  • Page 43

    43 Pre Pleat HT High T emperature Pleated Filters Standard Capacity: 84555.xxxxxx High Capacity: 84655.xxxxxx Up to 400 o F Flanders Pre Pleat HT filters are designed for increased air filtration efficiencies in an operating environment where temperatures reach 400 degrees Fahrenheit T ypical examples include air intakes for drying ovens or high te[...]

  • Page 44

    44 1.0 General 1.1 High T emperature pleated filters shall be Pre Pleat HT as manufactured by Flanders. 1.2 Filter sizes and capacities shall be scheduled on the drawings. 1.3 Filters shall be UL Class 1 listed and be able to operate up to 400 degrees Fahrenheit. 2.0 Filter Construction 2.1 Filter media shall be manufactured of a high loft- ed micr[...]

  • Page 45

    45 E35 Pleated P anel Filters Models E35-xxxxx General Flanders E35 extended surface pleated filters are designed to operate in most installations. Available in 1”, 2”, and 4” nominal thickness, these filters have an average atmospheric dust spot efficiency range of 25-30% per ASHRAE Standard 52.1 test methods. E35 filters offer greater ef fi[...]

  • Page 46

    46 1 2 4 E35-10201 E35-12201 E35-12241 E35-14201 E35-14251 E35-15201 E35-16201 E35-16251 E35-18241 E35-18251 E35-20201 E35-20241 E35-20251 E35-24241 E35-10202 E35-12202 E35-12242 E35-14202 E35-14252 E35-15202 E35-16202 E35-16252 E35-18252 E35-20202 E35-20252 E35-24242 E35-12244 E35-16204 E35-16254 E35-20204 E35-20254 E35-24244 E35-25294 E35-28304 C[...]

  • Page 47

    47 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL General Superflow-V extended surface area low pressure drop minipleat filters are designed for use in most commercial and industrial HV AC systems where medium to high efficiency filtration is required. Superflow-V filters are available in average efficien- cy range[...]

  • Page 48

    48 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL Nominal Size 250 FPM 375 FPM 5 00 FPM 625 FPM 750 FPM Media Wt. Efficiency Model HxWxD Area Each % Number Inches (Sq.Ft) (Lbs.) CFM PD CFM PD CFM PD CFM PD CFM PD Guide Specifications P erformance Data Notes: 1. PD represents clean pressure drop in inches w .g. The [...]

  • Page 49

    49 General Rigid-Air extended media surface rigid filters are designed for use in most commercial or industrial HV AC systems where medium to high ef ficiency fil- tration is required. They feature your selection of media backed with expanded metal and pleated. The pleats are held in place by rigid pleat separators, now available in either plastic [...]

  • Page 50

    50 Notes: 1. PD represents clean pressure drop in inches w .g. Recommended final pressure drop for all models is 1.5 inches w .g. 2. Operation down to zero airflow is satisfactory for all models. 3. Consult factory before operating at these velocities. 4. Efficiency is average and is based on ASHRAE Standard 52.1 test methods. 5. Performance tolera[...]

  • Page 51

    51 Notes: 1. PD represents clean pressure drop in inches w .g. Recommended final pressure drop for all models is 1.5 inches w .g. 2. Operation down to zero airflow is satisfactory for all models. 3. Consult factory before operating at these velocities. 4. Efficiency is average and is based on ASHRAE Standard 52.1 test methods. 5. Performance tolera[...]

  • Page 52

    52 Application Guidelines Rigid-Air filters may be used wherever job require- ments and available space will accommodate 6” or 12” deep filters. Rigid-Air filters should be selected using 24” x 24” and 24” x 12” face sizes. This allows for 12” incre- ments in height and width of the filter bank and insures that replacement cartridges [...]

  • Page 53

    53 General PrecisionCell extended media separator type rigid filters are designed for use in most commercial or industrial HV AC systems where medium to high ef fi- ciency filtration is required. PrecisionCell filters are available in average efficiency ranges of 60-65%, 80-85% and 90-95% per ASHRAE Standard 52.1 test methods and are available in s[...]

  • Page 54

    54 12 6 25 x 20 x 12 25 x 16 x 12 24 x 20 x 12 24 x 18 x 12 20 x 20 x 12 20 x 16 x 12 25 x 20 x 6 25 x 16 x 6 24 x 20 x 6 24 x 18 x 6 20 x 20 x 6 20 x 16 x 6 1750 1400 1700 1600 1400 1 100 875 700 850 800 700 550 90 70 86 76 70 54 43 33 41 36 33 26 108 84 103 91 84 65 52 40 49 44 40 31 16 14 16 14 14 14 10 10 10 10 10 10 18 17 18 17 17 15 10 9 10 9[...]

  • Page 55

    55 PrecisionCell Single Header filters are rec- ommended for through-the-frame applica- tions. Install by loading the filters through the T ype 9 frame until the header comes into contact with the gasket on the frame. Secure in place with Model P fasteners. PrecisionCell Single Header filters are ideally suit- ed for upstream or downstream installa[...]

  • Page 56

    56 Application Guidelines PrecisionCell filters may be used wherever job requirements dictate totally rigid filters and available space will allow only minimal inline depth. PrecisionCell filters should be selected using 24” x 24” and 24” x 12” face sizes. This allows for 12” increments in height and width of the filter bank and insures t[...]

  • Page 57

    57 57 PrecisionCell HT High T emperature Rigid Filters ASHRAE 65% 86255.xxxxxxH ASHRAE 85% 88255.xxxxxx ASHRAE 95% 89255.xxxxxxH General PrecisionCell HT filters are designed for high tem- perature applications up to 900 o F. They featur e th e same rugged construction as the standard PrecisionCell. The HT version is manufactured of specially selec[...]

  • Page 58

    58 Operating Nominal Size 500 fpm Media Weight Efficiency Limit o FH x W x D (inch) Rating Area Each cfm pd (sq. ft.) (lbs) 750 24 x 24 x 12 2000 .35 140 26 60-65% 24 x 12 x 12 1000 69 21 900 24 x 24 x 12 2000 .30 175 28 24 x 12 x 12 1000 90 22 750 24 x 24 x 12 2000 .55 140 26 80-85% 24 x 12 x 12 1000 69 21 900 24 x 24 x 12 2000 .50 175 28 24 x 12 [...]

  • Page 59

    59 59 PrecisionCell GT Gas T urbine Rigid Filters ASHRAE 65%z: PGT65xxxxxxxH ASHRAE 95%: PGT95xxxxxxxH General The PrecisionCell GT features heavy-duty con- struction to meet the rigorous demands of gas tur- bine rotary machinery air filtration applications. They may also be utilized where extreme velocity or turbulence have rendered other products[...]

  • Page 60

    60 60 Nominal Nominal 250 fpm 375 fpm 500 fpm 625 fpm Media Weight Depth Efficiency Size Area Each (inch) HxWxD cfm pd cfm pd cfm pd cfm pd (sq.ft.) (lbs.) (inch) 24x24x12 1000 1500 2000 2500 140 26 12 65% .15 .25 .35 .40 24x12x12 500 750 1000 1250 69 21 24x24x12 1000 1500 2000 2500 140 30 12 95% .25 .45 .65 .78 24x12x12 500 750 100 1250 69 25 Note[...]

  • Page 61

    61 General PrecisionCell II extended surface minipleat rigid fil- ters are a nominal four inches deep. They are designed for use in most commercial and industrial HV AC systems where medium to high ef ficiency fil- tration is required. They are available in average efficiency ranges of 60-65%, 80-85% and 90-95% per ASHRAE Standard 52.1 atmospheric [...]

  • Page 62

    62 Construction In the Flanders tradition of state-of-the-art technology , PrecisionCell II filters are built with a minipleat media pack to achieve a rugged, compact lightweight, high efficiency filter . Surepleat Side Access Housings Use a Surepleat Side Access Housing as a con- venient and space-saving method of installing PrecisionCell II filte[...]

  • Page 63

    63 Prefilters Prefilters are always a wise choice for the protec- tion of minipleat filters no matter what the efficiency or brand. The closely-spaced pleats are subject to face-loading (bridging) by lint and coarse particles, thus reducing their usual long life. A minimum 25- 30% ASHRAE efficiency pleated panel filter such as the Flanders Prepleat[...]

  • Page 64

    64 Notes 1. PD represents clean pressure drop in inches w .g. Recommended final pressure drop for all models is 1.5 inch w .g. 2. Operation down to zero air flow is satisfactory for all models. 3.Actual filter face size of 24” x 24” and 24” x 12” is 5/8” undercut on height and width. All other sizes are 1/2” under- cut on height and wid[...]

  • Page 65

    65 Important F eatures • Fully interchangeable with other manufac- turers’ hardware. • Heavy-duty fiberboard side panels. • Filters are UL 900 Class 2 listed. EA Cartridge Medium-High Efficiency Replacement Filters ASHRAE 30%: EA-30xx ASHRAE 55%: EA-55xx ASHRAE 85%: EA-85xx ASHRAE 95%: EA-95xx General EA Series Replacement Air Filters are p[...]

  • Page 66

    66 Cfm Capacity Pressure Drop (inch w .g.) Efficiency % Model Number Actual HxWxD (inch) 1.0 General 1.1 Filters shall be Model EA Series replacement fil- ters as manufactured by Flanders. 1.2 Filters shall be UL 900 Class 2 listed. 2.0 Filter Construction 2.1 Filters with an efficiency of 25%-30% shall be constructed of a non-woven cotton and synt[...]

  • Page 67

    67 General Precision Pak extended surface bag filters are designed for use in most commercial or industrial HV AC systems where medium to high ef ficiency fil- tration is required. Precision Pak filters are available in two media types: lofted fiberglass and micro-fine synthetic media with average efficiency ranges of 55%, 65%, 85%, and 95% per ASH[...]

  • Page 68

    68 Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products. How to Select a Precision Pak Filter • Determine the ASHRAE efficiency desired. • Determine the face velocity needed to fit the system • Select the shortest depth possible with a pressure drop [...]

  • Page 69

    1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 0.18 0.18 0.19 0.19 0.16 0.16 0.15 0.15 0.18 0.18 0.15 0.15 0.14 0.14 0.18 0.18 0.14 0.14 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 0.28 0.28 0.30 0.30 0.25 0.25 0.24 0.24 0.29 0.29 0.23 0.23 0.22 0.22 0.26 0.26 0.22 0.22[...]

  • Page 70

    70 Guide Specifications Application Guidelines Precision Pak filters should be selected using 24” x 12” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement filters will be readily available. Precision Pak filters should be installed with pockets vertical wherever possible. It is accep[...]

  • Page 71

    71 Important Features • INTREPIDTM by Kimberly-Clark • Extra high dust holding capacity • Dual stage gradient density electrostatic media • Low initial pressure drop provides long life •W ide range of depths and face sizes • Linear stitching for optimum pocket form • Three ASHRAE efficiencies: 75%, 85% and 95% General Precision Pak XD[...]

  • Page 72

    72 Nom. Width (inch) Nom. Height (inch) 85% XDH Synthetic Media Filters Nominal Depth (inch) Number of Pockets 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 375 fpm 500 fpm 625 fpm cfm pd cfm pd cfm pd 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 15[...]

  • Page 73

    73 75% XDH Synthetic Media Filters Nominal Depth (inch) Number of Pockets Nom. Width (inch) Nom Height (inch) 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 375 fpm 500 fpm 625 fpm cfm PD cfm PD cfm PD 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 150[...]

  • Page 74

    74 Application Guidelines Precision Pak XDH filters should be selected using 24” x 12” and 24” x 24” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement filters will be readily available. Precision Pak XDH filters should be installed with pockets vertical wherever possible. It is [...]

  • Page 75

    75 General Flanders models MS and MSG Moisture Separators are designed for use in air handling sys- tems requiring collection of water droplets or oil mist. W ater droplets in outside air are usually fog. In supply air , water droplets may occur as carry over from cooling coils and evaporative media or unevaporated moisture downstream of humidifier[...]

  • Page 76

    76 Guide Specifications Construction Moisture separators are constructed much like permanent metal washable filters. The nominal two inch thick media pack consists of 15 individual layers of pleated and flat aluminum wire mesh. Air entering and exiting support grids are expanded metal, and the media enclosing frame is 16 ga. galva- nized steel with[...]

  • Page 77

    77 General Flanders Model KKM is a heavy duty , washable, aluminum media, all metal filter . KKM is suitable for all residential and commercial applications. The KKM offers large filtering area, high dust hold- ing capacity , uniform loading and low resistance to air flow . It is recommended that the filter media be coated with dust adhesive for op[...]

  • Page 78

    78 1.0 General 1.1 W ashable air filters shall be KKM Air Filters as supplied by Flanders. 2.0 Filter Construction 2.1 Frame shall be galvanized steel with mitered corners and secured with pop rivet(s). Frame shall have drain holes in three corners. 2.2 W ashable filter media shall be multiple layers of slit and expanded aluminum bonded together . [...]

  • Page 79

    79 General Flanders Alpha 95 Filters are designed for use in HV AC applications requiring cleaner air than is pos- sible with ASHRAE - rated filters, but where HEP A - filtered air is not required. The filters are rated at 95% efficiency on 0.30 micrometer particles by the DOP test method. The Alpha 95 filter is approxi- mately 99% efficient by the[...]

  • Page 80

    80 Construction Flanders manufactures both conventional Separator Style and Pureform Separatorless 95 DOP Filters. T o make a Separator Style filter , the media is folded over corrugated aluminum separators with hemmed edges to separate the pleats in the filter pack. Flanders manufactures its own filter media, enabling it to develop a unique manufa[...]

  • Page 81

    81 Frame Materials Alpha 95 Filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter . The standard Fluid Seal[...]

  • Page 82

    82 Guide Specifications 1.0 General 1.1 Alpha 95 filters shall be extended media (sepa- rator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. 2.0 Filter Construction 2.1[...]

  • Page 83

    83 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL General Flanders offers a complete line of Alpha Cell HEP A Filters in two efficiencies to meet the needs of criti- cal applications where HEP A filtration is required. Individual testing, rigid quality control and modern assembly methods are used to ensure confor- [...]

  • Page 84

    84 Flanders manufactures both conventional Separator Style and Pureform Separatorless HEP A Filters. T o make a Separator Style filter , the media is folded over corrugated aluminum separators with hemmed edges to separate the pleats in the filter pack. Flanders manufactures its own filter media, enabling it to develop a unique manufacturing proces[...]

  • Page 85

    85 Frame Materials AlphaCell Filters are available in a variety of wood and metal frame materials such as particle board, ply- wood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter . The standard Fluid S[...]

  • Page 86

    86 1.0 General 1.1 Alpha Cell HEP A filters shall be extended media (separator type) (Pureform separatorless type) fil- ters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. 2.0 Filter Construction 2.1 The filter p[...]

  • Page 87

    87 High Capacity Design The Alpha 2000 High Capacity HEP A filter is avail- able in a nominal 12” depth configuration. It is designed for optimum performance and low operat- ing costs in both new and replacement systems. With 40% more media area than the standard capacity Alpha Cell filter , the Alpha 2000 saves space, energy , and material and l[...]

  • Page 88

    88 Alpha 2000 HEP A Filter Dimensions and Capacities Filter Depth Filter Size and Frame Actual Face Size CFM Capacity at Clean Weight (inches) Depth Designator (Inches Pressure Drop, Inches w .g . (lbs) .90 1.45 1.90 1 1-1/2 CG-F 24x24 1375 2000 2560 38 GC-F 24x12 650 920 1 180 26 YY -F 23-3/8x23-3/8 1350 1900 2450 37 YUF 23-3/8x1 1-3/8 610 865 1 1[...]

  • Page 89

    89 Frame Materials Alpha 2000 Filters are available in a variety of wood and metal frame materials such as particle board, ply- wood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter . The standard Fluid [...]

  • Page 90

    90 1.0General 1.1 Alpha Cell HEP A filters shall be extended media (separator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. 2.0 Filter Construction 2.1 The filter pack[...]

  • Page 91

    91 General Flanders manufactures metal-frame separator-style HEP A filters for applications with high-temperature requirements up to 1,000°F (540°C) for exhaust air only and 500°F (260°C) for supply air . High-tem- perature filters are available with either a gasket or fluid seal. Filters with Blu-Jel ® Fluid Seal have a maximum service temper[...]

  • Page 92

    92 Guide Specifications 1.0 General 1.1 High temperature separator style HEP A filters shall be Alpha HT models as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 2.0 Filter Construction 2.1 The filter pack shall be constructed by pleating a continuous sheet of non-woven water-r[...]

  • Page 93

    93 General Flanders Superflow 2K is a V -bed HEP A filter (99.99% at 0.30 micrometer) specifically designed for high airflow applications requiring HEP A effi- ciency at an ultra low pressure drop. The Superflow 2K can be incorporated into systems with air veloc- ities of 500 fpm and a pressure drop of 1.0 inch w .g. Product Design The Superflow 2K[...]

  • Page 94

    94 Model Number Nominal Size Actual Size Media Area Rated Flow SF2K-(*)-G(location)-GG 24" x 24" x 12" 24" x 24" x 1 1-1/2" 290 sq. ft. 2000 cfm SF2K-(*)-G(location)-CG 12" x 24" x 12" 12" x 24" x 1 1-1/2" 140 sq. ft. 900 cfm SF2K-(*)-G(location)-YY 24" x 24" x 12" 23-3/8&qu[...]

  • Page 95

    95 General Alpha Panel Minipleat HEP A/ULP A filters are avail- able in two particle size efficiencies: 99.99% on 0.3 µm and 99.99% on 0.12 µm. They are of fered in a complete range of standard sizes to meet the needs of critical applications where HEP A/ULP A filtration is required. Individual testing under rigid quality control and modern assem[...]

  • Page 96

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 96 Guide Specifications 1.0 General 1.1 Minipleat HEP A/ULP A filters shall be Alpha Panel Model AP493 or AP591 as manufactured by Flanders. 1.2 Filter sizes and capacities shall be as scheduled on the drawings. 1.3 Filter construction shall meet UL 900 Class 2 require[...]

  • Page 97

    97 General Flanders Pureflo T erminal HEP A/ULP A Filter Modules are lightweight low profile ducted units. The mini-pleat filter packs are designed to provide unidirectional airflow from tee-bar ceilings. Pureflo modules are available in two sizes: nominal 24” x 24” and 24” x 48” with either 10” or 12” diameter inlet collars. They are a[...]

  • Page 98

    Clean Filter Resistance(“w .g) Clean Filter Filter Resistance(inchw .g) 23-5/8 47-5/8 PF†-493-2424-* PF†-493-2448-* PF†-591-2424-* PF†-591-2448-* 23-5/8 47-5/8 Physical Data Notes: 1. *Insert suffix 10 (nominal 10”collar) or 12 (nominal 12” collar). Add “G” to suffix to designate the insulation option. 2. T olerances: L and W: +0,[...]

  • Page 99

    99 99 Pureflo-FPM F an-P owered T erminal Filter Modules Standard: PF-FPM*-xxxx-STD Room Side: PF-FPM*-xxxx-RSR (Where * is efficiency designator of 493 for 99.99% efficient on .3 micron particles and 591 is 99.9995% efficient on .12 micron partic les.) General Pureflo-FPM Fan-Powered T erminal HEP A/ULP A Filter Modules are lightweight unitized lo[...]

  • Page 100

    100 Standard Replaceable Module Room Side Replaceable Module PF-FPM-493-2424-RSR PF-FPM-493-2424-STD 99.99 23.87 23.63 360 1.68 659 0.86 PF-FPM-493-2448-RSR PF-FPM-493-2448-STD 0.3 F m 47.87 47.63 720 2.04 800 0.72 PF-FPM-591-2424-RSR PF-FPM-591-2424-STD 99.9995 23.87 23.63 360 1.89 742 0.76 PF-FPM-591-2448-RSR PF-FPM-591-2448-STD 0.12 F m 47.87 47[...]

  • Page 101

    101 FCP Carbon Pleat Activated Carbon Adsorbers Models FCP*xxxxx (Where * indicates carbon type model of 201, 202, 204, 301, 302, 304. See price book.) This table illustrates the differences in overall capacity of three carbon prod- ucts. Capacity to Product 75% Breakthrough Carbon Slurry 1.6 grams FCP 200 Series 25 grams FCP 300 Series 63 grams FC[...]

  • Page 102

    102 FCP Selection Media Rated Flow Initial Model Number Nominal Size Actual Size Area (cfm) Resistance (inches) (inches) (sq. ft.) (inch w .g.) FCP201-24242 24 x 24 x 2 23-3/8 x 23-3/8 x 1-3/4 20 2000 .55 FCP201-12242 12 x 24 x 2 1 1-3/8 x 23-3/8 x 1-3/4 10 1000 .55 FCP301-24242 24 x 24 x 2 23-3/8 x 23-3/8 x 1-3/4 20 2000 .65 FCP301-12242 12 x 24 x[...]

  • Page 103

    103 Improves IAQ through odor abatement and better particulate air filtration Many strong odors in living spaces come from materials that are either strong acids or strong bases. For example, sauerkraut smells up the house because it is highly acidic. And the “ammo- nia” smell of urine is highly alkaline...a strong base. The Flanders PH Odor Co[...]

  • Page 104

    104 Sensor y testing Body Odor Odor level testing was conducted in jars set up spe- cially for headspace odor testing. Sensory evalua- tion was run 20 hours after the jars had been set up to allow for ade- quate equilibration. 20 panelists participated in headspace odor level testing. The malodor in the headspace was iso- valeric acid vapor (Synthe[...]

  • Page 105

    105 Model C Disposable Carbon Gas Phase Odor Control Filters 50% Fill, models: C50-xxxxx 75% fill, models: C75-xxxxxx General The Model C Disposable Carbon air filter is an easy-to-install partial-bypass carbon type air purifi- er for light duty IAQ applications in home and com- mercial recirculated air systems. The filter uses premium grade granul[...]

  • Page 106

    106 1.0 General 1.1 Disposable carbon air filters shall be Model C as manufactured by Flanders. 2.0 Filter Construction 2.1 Filters shall be constructed of laminated cellulose paper honeycomb whose cells are partially filled with granular virgin coconut shell base activated carbon. 2.2 Fill level shall be 50% or 75% as specified. 2.3 Carbon shall b[...]

  • Page 107

    107 Superflow-VC Disposable Carbon Adsorber Models SFVC*-xxxxxx (Where * indicates carbon type: 201, 202, 204, 205 or 209. See Price book.) F eatures and Benefits •T otal detention multi-panel design combines high adsorption ef fi- ciency with low pressure drop • Entire cell is disposable so installation is clean, quick and easy • Installatio[...]

  • Page 108

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 108 Application Considerations Superflow-VC Adsorbers in HV AC airstreams can remove many gaseous contaminants thus mitigat- ing their effects on people and processes. They are especially useful in controlling common contami- nants that cause poor indoor air quality (I[...]

  • Page 109

    109 Adsorber Protection Particulate contamination must be considered when utilizing gas/vapor phase adsorbers. As a minimum, a Flanders prefilter with an efficiency of 25-30% per ASHRAE Std. 52.1 should be installed on the upstream side of the Superflow-VC adsorber in order to extend the service life by significantly reducing dirt build-up. Even hi[...]

  • Page 110

    110 110 Adsorber Model Number (See Note 1) SFVC-242412 SFVC-122412 Nominal Size H x W x D mm. (See Note 2) 610 x 610 x 305 305 x 610 x 3 0 5 Adsorber Model Number (See Note 1) SFVC-242412 SFVC-122412 Nominal Size H x W x D inch (See Note 2) 24 x 24 x 12 cfm 500 250 PD 0.10 0.10 Res 0.1 1 0.1 1 cfm 1000 500 PD 0.20 0.20 Res 0.050 0.050 cfm 1500 750 [...]

  • Page 111

    111 V aporclean V apor Phase Air Filter Models VC-xxxx-xx-xx-xxxx-xx See price book Important F eatures • Maximized carbon surface area • Increased efficiency and capacity • Low initial static pressure • Consistent carbon distribution V aporclean The Flanders V aporclean vapor phase adsorbers are designed for removal of molecular contami- n[...]

  • Page 112

    112 Sample Model Number VC 1501 16 01 2424 GD V aporclean Media type 24 ga Frame Style Size Gasket V aporclean P erformance The pressure drop of the V aporclean is 0.35 inch w .g. at a face velocity of 500 fpm. The initial efficiency of the adsorber under the following conditions shall be met. Contaminant Matching Match the V aporclean media type t[...]

  • Page 113

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 113 General HMZD carbon panels are available from 3/8” to 3” depths, and are easily installed in any existing side or front access housing without the usual clean up caused by carbon dusting. Bonded panels do not need to be refilled, thus eliminating the labor asso[...]

  • Page 114

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 114 Pressure Drop HMZD Panels can be incorporated into V shaped configurations with minimal pressure drop and impact on the system. Please note that the breakthrough test was based on continuous 100 ppm Hexane chal- lenge concentration. T esting conducted at an indepen[...]

  • Page 115

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 115 Clean Air is Only a Block A way Flanders, through innovative technology , has resolved the problems associated with loose filled activated carbon trays by introducing HMZD bond- ed carbon panels. HMZD stands for High Mass and Zero Dust. High Mass refers to the grea[...]

  • Page 116

    116 Guide Specifications 1.0 General 1.1 Molecular contamination control filters shall be Flanders High Mass and Zero Dust (HMZD) bond- ed carbonpanels. Panels shall be self-supported bonded granular carbon and be sized to fit into the selected Flanders Pureseal front or side access housing as well as competitive carbon systems. Model numbers shall[...]

  • Page 117

    117 T echsorb Chemical Media for Gaseous Contaminant Removal Models TS-*-B1 (Where * indicates chemical media designator . See price book.) General Applications T echsorb chemical media is specifically formulated to control application specific nuisance and harmful vapors. It is supplied in bulk form and may be incorporated into Flanders gas phase [...]

  • Page 118

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 118 Notes 1. Contaminant removal capacity is determined by passing a moist (85% r .h.) stream of air containing 1% by volume challenge gas through a one-inch diameter tube with a 9-inch deep bed of closely packed pel- lets at a rate of 1450 cc/minute and monitoring a 5[...]

  • Page 119

    General Flanders T ype 9 Holding Frames are used to con- struct built-up filter banks for upstream or down- stream access using ASHRAE rated filters. T ype 9 frames will accommodate 1”, 2” or 4” panel filters including metal washable filters. They are also suit- able for bag filters, self-supporting rigid filters and disposable type carbon el[...]

  • Page 120

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 120 Fastener Selection Chart Model P Fastener Model C-2 and C-4 Fastener Model C-12 Spring Loaded Fastener Model Length Upstream Downstream Number (inch) Filter Usage Service Service P-1 1 1” panel filter , Precision Pak, PrecisionCell, or Rigid-Air 2 4 P-2 2 2” pa[...]

  • Page 121

    121 General Uni-Frames are designed for retaining air filter media pads in applications that require additional media support. The frame is fabricated of 26 gauge corrosion- resistant steel channel with each corner of the frame mitered for squareness. Filter pads are sup- ported on the downstream side with a corrosion- resistant steel expanded meta[...]

  • Page 122

    122 K-T rac Modular Filter Framing System See model number development method on next page. Important F eatures • Provides substantial savings in field assembly • Filters are tightly sealed to eliminate air bypass • Filters can be replaced quickly and easily • Modules are factory-engineered with built-in stiff- ening • Construction is cor[...]

  • Page 123

    123 Height CodeOverall Height (inch)Width Code Height Overall Face 15W 20W 25W 30W 35W 40W 45W 50W 55W 60W 65W 70W Code Height Velocity Overall Width (inch) (in) (fpm) 36-1/26 48-1/16 59-7/16 71-7/16 82-13/16 94-13/16 106-13/16 118-13/16 129-9/16 141-9/16 152-15/16 164-15/16 10H 24-1/2 375 2250 3000 3750 4500 5250 6000 6750 75 82.5 90 9750 10500 50[...]

  • Page 124

    124 How the K-T rac W orks • A= 24” x 24” face size filter . C = 24” x 12” face size filter . • W eight does not include filters. Add approximately 6 lbs. per Precision Pak bag filter , 20 lbs. per PrecisionCell filter , 17 lbs. per Superflow V filter , and 17 lbs. per Rigid-Air filter . 10H 15H 20H 25H 30H 35H 40H 45H 50H 55H 60H Filte[...]

  • Page 125

    125 Drawing Notes 1. Framing members of extruded aluminum are factory-cut to exact length, pre-drilled and gasketed. 2. One vertical support for the center of the upstream side will be furnished on modules nominal 8 ft. wide. Wider mod- ules will be furnished with vertical supports on both the upstream and downstream sides. 3. Sealing levers are lo[...]

  • Page 126

    Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL 126 Perma Frame Hard Ceiling Adaptor Frames for T erminal Modules Models HCF A-xxxx General Flanders Perma Frame is used to mount ducted or fan-powered terminal modules in a hard ceiling application such as sheet rock or plasterboard. The Perma Frame is ideal for biote[...]

  • Page 127

    127 Guide Specifications 1.0 General 1.1 Sheet rock adaptor frame for ceiling mounted ter- minal modules shall be Perma Frame as manu- factured by Flanders. 2.0 Frame Construction 2.1 Frames shall be constructed of 18 gauge steel and welded flush on all exposed corners. 2.2 They shall be painted with a white powder coat paint. 2.3 The mounting flan[...]

  • Page 128

    128 Residential Air Cleaner Refills For Space Gard ® , Air Bear ® , Honeywell ® Air Cleaners* See model numbers in chart on next page. Media for high efficiency air c leaners For over 50 years, Flanders air filters have been protecting cleanrooms, hospital operating rooms and other critical environments. Now , homes and businesses can benefit fr[...]

  • Page 129

    129 Efficiency by P article Size Microns Efficiency 0.35 16% 0.62 28% 0.84 38% 1.14 47% 1.88 68% 3.46 75% 4.69 71% 6.20 69% 8.37 66% Replacement for: FP Refill(s) MERV Media Frame FP Model Honeywell ® 203719 203720 203721 203722 See FP Model 8 Electrostatic Poly Blend Wa ter resistant kraft board 82655.051625 82655.0452025 82655.0452020 82655.0451[...]

  • Page 130

    130 Model 500AB Air Cleaner Housing Model 82855.052025 General The Model 500AB air cleaner housing is designed for use with the Model 500AB or 550AB cartridge in an HV AC system. Both of these cartridges feature deep pleated media whose area is several times the face area of the housing. With the advent of modern air tight buildings, many of us spe[...]

  • Page 131

    131 V ersatile Installation The Model 500AB air cleaner housing can be installed in a variety of configurations; Highboy , Lowboy , Horizontal, Upflow or V ertical Downflow . TYPICAL TRANSITION (VERTIC AL DOWNFLOW) LOWBO Y HORIZONT AL HIGHBO Y UPFLOW Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL the filter and hva[...]

  • Page 132

    132 Airia 350 Electronic Room Air Cleaner Important F eatures • Super quiet operation • Operates for pennies a day . • 4 stage filtration removes particles, odors. • Moves 350 cubic feet of air every minute. • Built-in casters for easy moving. • Easy to service General Airia 350 delivers high quality air filtration right into the living[...]

  • Page 133

    133 General The Airia line of electronic air cleaners delivers high, instantaneous filtering efficiency in a reliable, permanent package that is built to last the life of an air handling system. Airflow resistance is low and constant. Operation costs only pennies per day . Airia 1000 and 2000 are designed for easy duct- mounted installation with to[...]

  • Page 134

    134 Specifications Airia 1400 (16x25) Airia 2000 (20x25 Rated Capacity 1400 CFM 2000 CFM Electrical Input 120 V ac, 1 Ph, 60 Hz 120 V ac, 1 Ph, 60 Hz Power Consumption 40 watts 48 watts Resistance to Airflow 0.2” w .g. @ 1400 CFM 0.2” w .g. @ 2000 CFM Unit Weight 40 lbs. 45 lbs. Prefilter Disposable pleat Disposable pleat Main Collector 2-stage[...]

  • Page 135

    the filter and hvac store[...]

  • Page 136

    the filter and hvac store[...]