FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder should contain:
- informations concerning technical data of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder
- name of the manufacturer and a year of construction of the FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder item
- rules of operation, control and maintenance of the FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the FARGO electronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Pro-LX Laminat ing Card Printer/Encoder User Guide (Rev . 4.0) Part Number: L00 0700[...]

  • Page 2

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 2 Pro-LX Laminatin g Card Printer /Encoder User Gu ide (Rev. 4.0), prope rty of FARG O Electronics, Incorpora ted Copyright  2002 , 2003, 2004, 2005, 2006 by FA RGO Electronics , Incorp orated. All rights reserved. Printed in the United[...]

  • Page 3

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 3 How to use the manual The Pro-LX Lamina ting Card Printe r/Encoder Us er Guide (Rev. 4.0) is, in fact, the troubleshooting and field service manual for the e ntire Pro-LX Ca rd Printer. The manu al is designed to prov ide install ers and[...]

  • Page 4

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 4 Safety Messages (review carefully) Symbol Critical Instruc tions for Safety purposes Danger: Failure to follo w these installat ion guidelines c an result in de ath or serious injury . Information that raises potential safety issues is i[...]

  • Page 5

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 5 Pro-LX Laminating Card Printer/Encoder Overview Revie wi ng Pro-LX Block Diagra m 1 3 2 5 4 6 7 8 9 10 1 1 12 13 14 15 16 17 19 20 21 22 18 23 24 25 26 27 28 29 30 31 32 33 34 35 36 30 30 37 38 39 40 41 42 Motors Sensors Parts 1 Card Fee[...]

  • Page 6

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 6 Revie wi ng Pro-LX Boot Up Seque nce Step Process 1 On Power up, prin t and the Lam Steppe r Motor enga ge. 2 Print and Lamination Headlift Sensor chec ks for current open/closed state. If either Sensor re gisters closed, the appropriate[...]

  • Page 7

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 7 Revie wi ng Pro-LX Sequence of Operations The follow ing sequence describes a dual sided fu ll color print job w ith magnetic encodi ng and single sided La mination . Step Process 1 The File in formation is receiv ed from the PC 2 The Pr[...]

  • Page 8

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 8 Reviewing Pro-LX Sequence of Operations (continued) Step Process 15 The Print Co ver Sensor checks for a closed state. 16 The Ribbo n Drive M otor engages. 17 The Ima ge Data is burned by the printhead until ima ge data is depleted. All [...]

  • Page 9

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 9 Reviewing Pro-LX Sequence of Operations (continued) Step Process 34 The card is fed past the Print TOF Senso r. All Stop. 35 The Flipp er Table Clutch en gages. 36 The Lamination Stepper e ngages. 37 The Flipp er table rotates to level. [...]

  • Page 10

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 10 Reviewing Pro-LX Sequence of Operations (continued) Step Process 54 The Flipp er Clutch enga ges. 55 The Flipp er table returns to le vel. 56 The Flipp er Clutch disengages . 57 The Card feeds back to Print TOF Senso r then forw ard to [...]

  • Page 11

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 11 Table of Con tents How to use the m anual _________________________________________________________________3 Saf ety Mess ages (r eview caref ully ) ________________________________________________________ 4 Pro-L X Lam inating Card Pri[...]

  • Page 12

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 12 Encodi ng Errors______________________________________________________________________ 69 Resolv ing the Mag Verify Error Messag e _______________________________________________ 69 Resolving data intende d for the Magnetic Stripe ( bei[...]

  • Page 13

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 13 Ente ring Track Informati on _________________________________________________________ 131 Rev iewing Tracks 1, 2 and 3 (i n ta ble f ormat) ___________________________________________132 Rev iewing the Track Data Note _________________[...]

  • Page 14

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 14 Section 5: Packing th e Pro-LX C ard Printer ______________________________________ 194 Section 6: Board Le vel Diagnost ics ______________________________________________ 195 Board Err ors ______________________________________________[...]

  • Page 15

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 15 Section 1: S pecifications The purpose o f this section is to prov ide the User with speci fic information on the Re gulatory Compliances, A gency Listings, Technical Speci f ications and Function al Speci fications for the Pro-LX Lamin[...]

  • Page 16

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 16 A gency Li stings Term Description Emissions Standards CE, FCC, CRC c137 4, BSMI, I TS (EN 55022 Cla ss B:1995, FCC Class B, EN 82082 -1:1997). Safety Standards UL 1950, CSA C2 .2 No.950-95 and T ü V -GS (EN 60950 A1-A4, A11 ). Technic[...]

  • Page 17

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 17 Technical Specifications (continued) Term Description Overlaminate Options  Thermal Trans fer Overlamina te, .25 mil thic k, 500 prints  PolyGuard Overla minate, .6 mil thic k, 250 prints  PolyGuard Overla minate, 1.0 mil thick[...]

  • Page 18

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 18 Technical Specifications (continued) Term Description Print Ribbon Options  Full Color w ith resin black, YMC KO*, 250 prints  Full Color w ith two resin black panel s, YMCKOK*, 250 prints  Full Color w ith resin black, no ove [...]

  • Page 19

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 19 Functional Specifications The Card Printer util izes tw o different, yet closely related printin g technologies to achie ve its remarkable direct- to-card print quality for dye-su blimation and resin thermal trans fer. ( Note: The Card [...]

  • Page 20

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 20 Printer Compo nents: Top Co ver to Po wer Port Component D escription Print Top Cover Opens to allow access to the Printhead , Print Rib bon and card path. ( Note: This cov er must be closed in order for the Printer to begin printing.) [...]

  • Page 21

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 21 Printer Components: Top Cover to Power Port (continued) This table display s Printer componen ts. Re fer to the table in thi s section. Print T op Cover Print head LCD D isplay On LED L ight Rea dy LE D Lig ht Pause /Re sume Button On /[...]

  • Page 22

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 22 Printer Components: Top Cover to Power Port (continued) Component D escription Ready LED Light W he n ON , this li ght indicates the P rinter is ready for operation. W hen OFF , this light indi cates the Printe r is either OFF or paused[...]

  • Page 23

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 23 Printer Components: Top Cover to Power Port (continued) Component Description Card Thickness Adjustment Slid e Adjusts the Printer to feed va rying card thickness es. See the Resolving the Card Feeding Errors p rocedure in S ection 2, p[...]

  • Page 24

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 24 Printer Compo nents: Centronics-Ty pe Par allel Interfa ce The Card Printer is e quipped w ith a standard 8-bit centronics-ty pe parallel inter face port. This communication po rt is the means throu gh wh ich the Printer receiv es data [...]

  • Page 25

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 25 Printer Compo nents: Print Ribb ons The Card Printer util izes both dye-subl imation an d/or resin thermal transfer methods to print images directly onto blank cards. Since the dy e-sublimation and the resin ther mal transfer print meth[...]

  • Page 26

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 26 Printer Compo nents: Resin-On ly Print Ribb ons Resin-only Print Ribbons consist o f a continuous r oll of a single resin color. No pro tective overlay panel (O) is provided since resin images d o not require the protection o f such an [...]

  • Page 27

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 27 Printer Compo nents: Dy e-Sublimation -Only Print Ribbons A dye-sublimation -only Print Ribbon is availab le in a monochrome v ersion. This ribbon consists of dye-subli mation ribbon panels which alternate with a clear pro tectiv e over[...]

  • Page 28

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 28 Printer Components: Dye-Sublimation-Only Print Ribbons (continued) Type Description Full-Color (YMCK O) (provides 250 prints) This ribbon is used to print full-colo r photo ID car ds along wi th resin black text and bar codes. Both i nf[...]

  • Page 29

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 29 Printer Compo nents: Blank Ca rds Caution: Nev er run ca rds with a conta minated, d ull or uneven surface through the Printer. Printing onto such cards w ill ultimately lead to poor print quality and will greatly reduce the li fe of th[...]

  • Page 30

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 30 Printer Components: Laminator Danger: The Printer ’ s Lamination Roll er can reach tempera tures excee ding 350 degree F (175 ° C ). Use extreme caution when operating the Lam inator . Never touch the Lamination Rolle r unless the Pr[...]

  • Page 31

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 31 Revie wi ng the up graded 81754 PVC Cards The upgraded 81754 PVC cards are designed for a sharper card ima ge qual ity and for reduced debris and defects on Fargo Card Printers. Carefully read these detaile d notes and instructions be f[...]

  • Page 32

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 32 Reviewing the upgraded 81754 PVC Cards (continued) Follow these two (2) instructions belo w: 1. Instruction for ne w 81754 PVC card stock: Inc rease the Printer Driver ’ s Dy e-Sub Intensity to print w ith the new 81754 PVC card sto c[...]

  • Page 33

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 33 Printer Compo nents: Laminato r The Printer's internal lamina tion system is used to choose betw een both a The rmal Transfer Film overlamina te and a poly ester patch overlamina te called Poly Guard ™ . The The rmal Film overlam[...]

  • Page 34

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 34 Visual Security Solutions (Specifications) VeriMarkTM Ca rds - 2-D holograph ic foil applicat ion VeriM arkTM Cards are a low cost, customized 2- D holographic foil application, that is made in two steps.  The first step is to emboss[...]

  • Page 35

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 35 Visual Security Ca rd Stock - To lerances  Tolerance of base foil placement will equal +/- .010" from the nea rest edges o f the card  Tolerance of lay ered foil wil l equal +/- .010" VeriMarkTM - A pplication Spec ifica[...]

  • Page 36

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 36 Section 2: General Troubleshooting The purpose o f this section is to prov ide the User with speci fic procedures relating to the LCD/SmartGuard M essages, Communica t ion Errors, Ca rd Feeding Er rors, Print Process Errors, Card Jam Er[...]

  • Page 37

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 37 Reviewing the Top Line LCD Messages (continued) Message Cause Flipping Card Indicates card is bein g flipped for backsi de printing. Head-dow n Failed Printhead is unable to lo wer itself. See the Resolv ing the Headli ft Error Message [...]

  • Page 38

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 38 Reviewing the Top Line LCD Messages (continued) Message Cause Key Card Dele ted Indicates the data on the Smart Guard Access Car d was success fully deleted. Appears only when using the Smar tGuard Security Feature. See the SmartGuard U[...]

  • Page 39

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 39 Reviewing the Top Line LCD Messages (continued) Message Cause Rasterize Shie ld Indicates the Printer is load ing the SmartShi eld security image from the SmartGuard Ac cess Card into its memory. Ap pears when a val id access card conta[...]

  • Page 40

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 40 Reviewing the Top Line LCD Messages (continued) Message Cause Smart Card Error Unable to encode smart card. Smart Card Good Indicates smart ca rd was success fully encoded. Smart Encodin g Indicates the Printer is writing or encodin g d[...]

  • Page 41

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 41 Reviewing the Bottom Line LCD Error / Status Messages (continued) Message Cause Lam Error/Out T he overlamin ate is either ou t or an error has o ccurred. See the Resolving the La m Error/Out Er ror Message proc edure in Sectio n 2, pag[...]

  • Page 42

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 42 Reviewing the BOTH Line LCD Error / Status Messages (continued) Message Cause CANCEL =Abort RESUM E=Continue Appears when the Pause/Resume bu tton is pres sed any time while the Printer is powered ON. Al so appears w hen the On/Cancel b[...]

  • Page 43

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 43 Communications Errors Resolving the Communicatio n Errors Symptom(s): In correct output , communications error on PC or Printer, stall ing, no response from Printer, no job printed, “ p aper out ” e rror. Step Procedure 1 Confirm th[...]

  • Page 44

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 44 Resolving the Communication Errors (continued) Step Procedure 4 Determine if there is inter ference from an ex ternal dev ice. a. Do not use an A/B switch box or other periphe ral in line w ith the parallel cable. b. If using a sw itch [...]

  • Page 45

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 45 Resolving the Communication Errors (continued) Step Procedure 7 Determine whether there is an adequate or inadequate ha rd drive space. Caution: A large volume o f temporary files on the compute r can cause communica tions errors. Acces[...]

  • Page 46

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 46 Card Feeding Errors Resolving the Card Feeding Errors Symptom: Two or more cards feed a t the same time or the cards will not feed at all . Step Procedure 1 Cle an the Input Roller. a. Open the Printer's top cov ers and remove all [...]

  • Page 47

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 47 Resolving the Card Feeding Errors (continued) Step Procedure 2 Ensure the Card Thic kness Slide is se t correctly. a. Loosen the Slid e Lock by rotating i t counter cloc kwise and then push the Card Thickness Sl ide forw ard or backward[...]

  • Page 48

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 48 Resolving the Flipper Jam Erro r Message Symptom: A Flip per Jam erro r is displayed on the LCD. Step Procedure 1 Check for any obstructio n. a. Open the laminatio n top cov er. Manually rotate the Flipper Table a t a full 360-degrees r[...]

  • Page 49

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 49 Print Process Errors Resolving the Headlift E rror Message Symptom: The Head Up/Dow n Err or or Rolle r Up/Down Error is displ ayed on the LCD. Step Procedure 1 Cy cle the headlift motors. a. Remove the front cover. b. Open both the Lam[...]

  • Page 50

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 50 Resolving the Cover Open Error Message Symptom: A Cov er Open error is display ed when the cove r is closed or the Rol lers do not operate (when the cover is open). Step Procedure 1 Test the Senso r by foll owing these steps . a. Remove[...]

  • Page 51

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 51 Resolving the Blank Outpu t issues Symptom: A card is ejected blan k (that should b e printed). Step Procedure 1 Run a sel f-test. a. Clear any card ja ms. b. Unplug power from the Printer. c. W hile holding dow n the Pau se / Resume bu[...]

  • Page 52

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 52 Resolving the Blank Output issues (continued) Step Procedure 4 Check the Printhead con nections. a. Open the top print cover. b. Remove the tw o (2) thumbscrews from the Print head cover plate and remove the cover plat e. c. Check to en[...]

  • Page 53

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 53 Card Jam Errors Resolving the Card Jam: Print Error Message Symptoms: The ca rd is phy sically jammed in the Printe r or a Card Sens or is reportin g a card is present. Step Procedure 1 Look for a jammed card in the Printer. a. Open the[...]

  • Page 54

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 54 Resolving the Card Jam: Mag Error / Smart E rror Message Symptoms: The Ca rd Jam: M ag Error or Card Jam: Smart Error is display ed on the LCD. Step Procedure 1 Look for a jammed card in the Printer. a. Open the Printer ’ s top cov er[...]

  • Page 55

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 55 Resolving the Card Jam: Lam Error Message Symptom: The Ca rd Jam: Lam E rror is display ed on the LCD. Step Procedure 1 Look for a jammed card in the Printer. a. Open the Printer ’ s top cov er. b. Remove the ribbon from the Prin ter.[...]

  • Page 56

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 56 Resolving the Card Jam: Flip Error Message Symptom: A Ca rd Jam: Flip Erro r is display ed on the LCD. Step Procedure 1 Run a Sel f test. a. Clear any card ja ms. b. Unplug power from the Printer. c. W hile holding dow n the Pau se / Re[...]

  • Page 57

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 57 Ribbon Errors Resolving the Lam Error/Out E rror Message Symptom: The Printe r see ms to skip Poly Guard overla minate patches or si mply wind the overlaminate until the Printer's Ready LED flashe s. Step Procedure 1 Check that the[...]

  • Page 58

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 58 Resolving the Lam Error/Out Error Message (continued) Step Procedure 3 Check the Lamina te Ribbon Clutch to determine if it is too loose . a. Remove the back cov er. b. Use a 7/16 ” w rench to tighten the nut on the end of the encode [...]

  • Page 59

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 59 Resolving the Skipping Ribb on Panel issues Symptom: The P rinter is usin g more than one s et of ribbon panel s to print one sid e of a card. Step Procedure 1 Cal ibrate the Ribbon Se nsor. a. Reset the Printer to clear any Error Messa[...]

  • Page 60

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 60 Resolving the Skipping Ribbon Panel issues (continued) Refer to the prev ious procedure. Continued on the nex t page[...]

  • Page 61

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 61 Resolving the Skipping Ribbon Panel issues (continued) Step Procedure 2 Adjust the Ribbon Clutch a. Remove the back cov er. b. Use a 7/16 th w rench to tighten the nut on the end of the encoder w heel by a ½ - turn. 3 Test the Encode r[...]

  • Page 62

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 62 Resolving the Wrong Ribb on error (being display ed incorrectly ) Symptom: A W ron g Ribbon Error is display ed on the LCD even though the correct ribbon is installed in the Prin ter. Step Procedure 1 Veri fy the driver settings are cor[...]

  • Page 63

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 63 Resolving the Wrong Ribbon error (being displayed incorrectly) (continued) Step Procedure 2 Test the Rib bon ID Sens or. a. Unplug the Printer . b. Remove the back cov er. c. Flip switches 3 and 4 on the ban k of DIP sw itches in the M [...]

  • Page 64

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 64 Resolving the Ribbon Breaking issu es Symptom: The Ri bbon brea ks when printing or a Ribbon Jam Error is di splayed on the LCD Step Procedure 1 Cal ibrate the Ribbon Se nsor. a. Reset the Printer to clear any Error Messages by removing[...]

  • Page 65

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 65 Resolving the Ribbon Breaking issues (continued) Step Procedure 2 Determine where the rib bon is breakin g. a. Open the Top Print Cover. b. Remove the ribbon from the Prin ter. c. Inspect the ribbo n at the brea k point.  If the Ribb[...]

  • Page 66

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 66 Resolving the Ribbon Breaking issues (continued) Step Procedure 4 Adjust the Image Placem ent. a. Reset the Printer to clear any Error Messages by removing Power and reapplyi ng. b. Open the Printer Co ntrol Pan el from the Compute r. ?[...]

  • Page 67

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 67 Resolving the Lamination (not ad hering to the ca rd surface) problem Symptom: The lami nation w ill not transfer to the card or is easily peeled off the card . Step Procedure 1 Ensure the Card quality by v erifying that these require m[...]

  • Page 68

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 68 Resolving the lamination (not adhering to the card surface) problem (cont.) Step Procedure 2 Check Lamina t ion Temperature. a. Open the Printer Co ntrol Pan el from the Compute r.  If using W indow s 95/98/M E, right click on the Pr[...]

  • Page 69

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 69 Encoding Errors Resolving the Mag Verify Err or Message Symptoms: A M ag Verify error is displaye d on the LCD wh en attempting to encode . Step Procedure 1 Check to ensure that the cards are loaded w ith the M agnetic Stripe facin g do[...]

  • Page 70

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 70 Resolving the Mag Verify Error Message (Continued) Refer to the prev ious procedure regarding this dis play. M a g n e t ic H e a d ( 3 S t a tio n a ry M a g n e t ic T r a c k s ) D ir e c tio n o f C a r d T r a v e l w h ile b e i n[...]

  • Page 71

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 71 Determining w h y t he Printer cannot read encoded dat a Step Procedure 1 Veri fy that the cards are l oaded properly with the M ag netic Stripe facing d own and towards the bac k of the Prin ter. 2 Veri fy that the card is encoded with[...]

  • Page 72

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 72 Resolving data intended for the Magnetic Str ipe (being printed on the card) proble m Step Procedure 1 Confirm tha t the applicatio n is formatting the magnetic s tring correctly . See the Using the Magnetic Track Selection op tion proc[...]

  • Page 73

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 73 Diagnosing Image Problems Resolving the Pixel Failure prob lems Symptom: A thin line or scratch travels the entir e length of the ca rd. Step Proced ure 1 Check the card s tock for scratches. Replace the c ards (as needed ). 2 Examine t[...]

  • Page 74

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 74 Resolving the Card Surface Deb ris problems Symptom: Print s have spots (w hite or colored voi ds) and/or dust on them. Step Proced ure 1 Be sure the cards a re clean and s tored in a dust -free env ironment. Do not use cards with embed[...]

  • Page 75

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 75 Resolving the Incorrect Image Da rkness prob lems Symptom: Printed cards are too dark or too li ght. Step Proced ure 1 Run a self-test to identify problems with the driv er settings. See Runni ng the Sel f Test in Section 2 , page 87. 2[...]

  • Page 76

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 76 Resolving the Incorrect Image Darkness problems (continued) Step Proced ure 3 Correct the Image Darkness . See Using the Ima ge Darkness optio n in S ection 3, page 100.[...]

  • Page 77

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 77 Resolving the Ribbon Wrinkle problems Symptom: Printed cards hav e off-colored li nes or streaks on them. Step Procedure 1 Conf irm that the P rinter is usin g the most current driver via: http://ww w.fargo.com 2 Reduce the Dye-Sub Inte[...]

  • Page 78

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 78 Resolving the Ribbon Wrinkle problems (continued) Step Procedure 3 Reduce the Image Darkness. See Using the Image Darkness option in Section 3, page 100. 4 I ncrease the Ribb on tensi on. a. Unplug the Printer . b. Remove the rear cover[...]

  • Page 79

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 79 Resolving the Excessive Resin Printing prob lems Symptom: Blac k resin tex t and barcodes appea r smeared o r too thick. Step Proced ure 1 Reduce the Resin Heat settin g within the Ima ge Color tab o f the Printer Driv er . See Using th[...]

  • Page 80

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 80 Resolving the Excessive Resin Printing problems (continued) Step Proced ure 2 Reduce the Ima ge Darkness. See Using the Ima ge Darkness option in Section 3, page 100.[...]

  • Page 81

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 81 Resolving the Incomplete Res in Printing prob lems Symptom: Blac k resin tex t and barcodes appea r faded or too light. Step Procedure 1 Increase the Resin Heat setting withi n the Image Col or tab of the Printe r Driver. See Usin g the[...]

  • Page 82

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 82 Resolving the Image Placemen t problems Symptom: Printin g is cut off or is not centered o n the card or a w hite border appea rs. Step Procedure 1 Verify if the Image Positi on option w ithin the Cali brate tab is set inco rrectly . a.[...]

  • Page 83

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 83 Resolving the Image Placement problems (continued) Refer to the prev ious procedure.[...]

  • Page 84

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 84 Resolving the Image Placement problems (continued) Step Procedure 2 Verify the Image Placemen t setting is set correctly . a. Open the Printer Co ntrol Pan el from the Compute r.  If using W indow s 95/98/M E, right click on the Pro-[...]

  • Page 85

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 85 Resolving the Image Placement problems (continued) Refer to the prev ious procedure.[...]

  • Page 86

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 86 Resolving the Poor Image Qual ity problems Symptom: Photos on the cards lo ok pixil ated or grainy, as shown below. Step Procedure 1 Use hig h-resolution , 24-bi t color images to captu re an image:  at a 24-bit color set ting,  a[...]

  • Page 87

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 87 Running the Self Test Perform a self-test after (a) an ini tial setup of the Printer, (b) a calibration procedure has been conducted o r (c) a part has been replaced to check for proper Printer operation. Step Procedure 1 Verify that a [...]

  • Page 88

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 88 Revie wi ng the Main Circu it Board Perform the standa rd self-test and the other test modes (made av ailabl e by changing the D IP Switch Settings w ithin the Printe r). Use these additional self-tests to isolat e and diagnose Printer [...]

  • Page 89

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 89 Using the DIP S w itch (Self-test) Step Procedure 1 Activate any of these diagnostic tests and Cal ibration modes. See Running the Self Test in Sec tion 2, page 87. During the activ ation o f the Self-test, the P rinter will:  Detect[...]

  • Page 90

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 90 Using the DIP Switch (continued) Step Procedure 4 W hen completed , turn OFF the pow er to the Printer to reset the operatin g mode of the Printer.  The first illustration (below ) shows all eight (8) sw itches in the normal OFF posi[...]

  • Page 91

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 91 Setting the DIP Switch Sett ings ( Note: The capital letter “ X ” in dicates that the switch should be set to ON or DO W N. ) SW1 SW2 SW3 S W4 SW5 SW6 Diagnostic modes Standard Sel f-test (YM C) front, (K or B) on back X X Self test[...]

  • Page 92

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 92 Running the 15-Shade Self Test This is the Sel f-test that app ears when speci fic changes are made to the DIP Swi tch Settings.[...]

  • Page 93

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 93 Interfacing Information The Printer is equipped with a standard 8-bit Cen tronics-type Parall el Data Com munications Port. ( Note: The Printer's Parallel Interface Conn ector is a standa rd 36-pin Amp type wi th two metal-wi re re[...]

  • Page 94

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 94 Revie wi ng the Ce ntronics Para llel Pin A ssi gnments Pin No. Signal Direction Description 1 ______ Strobe In A LO W pulse greater tha n 1 µ s causes the Printer to read one byte of data. 2 Data 0 In Data bit 0 3 Data 1 In Data bit 1[...]

  • Page 95

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 95 Reviewing the Centronics Parallel Pin Assignments (continued) Pin No. Signal Dir ection Description 12 Paper Error Out Low = OK, High = media error 13 Ready Out Low = off-line, High = on-line 14, 15 Not Used 16 Sig Gnd 17 Chassis Gnd 18[...]

  • Page 96

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 96 Revie wi ng the P rinter Timing D iagram The timing diagram (below ) illustrates the data an d handshake li nes during the t ransfer of one data byte to the Computer. Data 0 - Data 7 DATA VALID Strobe Busy Acknlg Tdsu Tstr Tdh Tbp Tack[...]

  • Page 97

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 97 Revie wi ng the P rinter Timing Interval Description Minimum Value Typical Value Tdsu Data setup time 0.5 µ s Tstr _____ Data strobe w idth 1 µ s Tack ______ Acknlg pulse width 3.75 µ s Tdh Data hold time 0.5 µ s Tsb _____ Busy dela[...]

  • Page 98

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 98 Section 3: P rinter Adjustm ents Review this section for speci fic information on the Sa fety Messages and th e Printer Drive r Options; and the Calibrate, M agnetic Encoding, L amination, Overlay / Print Area, Ima ge Color, Device Opti[...]

  • Page 99

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 99 Using the Settings dialog box Access the Settin gs dialog box via the Settings button on the Calibrate tab . Use the adjustment mode to change the Printer's inte rnal settings for overall Ima ge Darkness, I mage Placement, Print Le[...]

  • Page 100

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 100 Using the Image D arkness opt ion Use this option to se t the ov erall darkness o f the printed ima ge by increasi ng or decreasing the amount of heat used by the Printhead w hen printing. Step Procedure 1 Lighten the prin ted image by[...]

  • Page 101

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 101 Using the Image Placement option Use this option to ad just the len gthwise or horiz ontal position of the printed ima ge on a card so it appears cente red. ( Note: W hen adjustin g this val ue, keep in mind th at cards alway s remain [...]

  • Page 102

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 102 Using the Print Length option Use this option to reduce or len gthen the overall printable area in order to optimize edge-to- edge printing tow ard the trailin g edge of a card. ( Note: W hen ad justing thi s value, keep in mind that c[...]

  • Page 103

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 103 Using the Magne tic Offset option Use this option only if the Printe r has a built-in Magnetic Stripe encode r . ( Note: If so, use this option to shi ft the startin g point of where the Printer w ill begin encoding the magnetic Track [...]

  • Page 104

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 104 Using the Flipp er Offset opt ion Use this option to se t the position o f the flipper so that it is lev el with the card path. Step Procedure 1 Lower the lead-in of the Flip per Table (or offset t he Flipper more clockwi se) by clicki[...]

  • Page 105

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 105 Using the Lam ination Placemen t option Use this option to ad just the len gthwise or horiz ontal position of a PolyGuard pa tch on a card so it appears cente red. ( Note: W hen adjustin g this val ue, the cards alw ays remain in the s[...]

  • Page 106

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 106 Using the Lamination Placement option (continued) Step Procedure 2 O nce adjustment is compl ete, click the OK but ton to sav e the adjustment s or click the Cancel bu tton to cancel any adjustments (jus t made). 3 a. Print a sel f-tes[...]

  • Page 107

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 107 Adjusting the Card Flattene r Use the adjustable Ca rd Flattener to fine-tune the flatness of lamina ted cards. ( Note: This flattener wor ks by reverse bending card s as they e ject from the lamina tor w hile they are still warm.) Ste[...]

  • Page 108

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 108 A djusting the Card Fla ttener (continued) Step Procedure 5 If laminated cards are bowi ng upward, turn the Ca rd Flattener Adjustment Knob clockwise or one full rotation, then p rint and lami nate a test card . Repeat this process as [...]

  • Page 109

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 109 Adjusting the Laminator Adjust the laminato r's Card Guid e Rail i f the PolyGuard patches a re being appl ied too closel y to or overlapping a card's top or bot tom edge (as the card travel s through the Prin ter. Step Proce[...]

  • Page 110

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 110 A djusting the Lamina tor (continued) Step Procedure 3 M ove the Card Guide Rai l slightly tow ard the front of the Printe r (opposite the direction the patch must move in ) if the Poly Guard patch is bein g placed more toward a card&a[...]

  • Page 111

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 111 Printer Driver Options Access the Pro-L X Card Printer Properties wi ndow via Start > Settings > P rinters > Pro-LX Card Printer (icon) > Pro-LX Card Printer (w hich brings up the P ro-LX Card Prin ter Properties window).[...]

  • Page 112

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 112 Using the Calibrate tab Use this option to (a) control the posi t ion of the prin table area in rela tion to the card, (b) calibrate Sensors and (c) adjust the internal Prin ter settings.[...]

  • Page 113

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 113 Using Image Posi tion con trols Use the Image Pos ition controls to adjust the position o f the overall print area to be precisely centered on a card. Step Procedure 1 Click on the Vert ical and Horizon tal adjustment arrows to adjus t[...]

  • Page 114

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 114 Using Image Position controls (continued) Review the Image Position dia gram, which di splays how the printed image will move in relation to the fixe d card positio n as positiv e and negativ e image placement va lues are entered. Step[...]

  • Page 115

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 115 Using the Lam ination Positio n control Use the Laminat ion Position con trol to adjust the horizontal position of th e PolyGuard overlaminate. ( Note: This control functions in the exact same fashion as the Image Position controls, ex[...]

  • Page 116

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 116 Using the Senso rs and Sett ings butto ns Use the Sensors bu tton to bring up a separate dialog box for cali brating the Prin ter's ribbon and lamination Senso rs. Continued on the nex t page[...]

  • Page 117

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 117 Using the Sensors and Settings buttons (continued) Use the Settings button to bring up a separate dialog box for adjus ting the internal P r inter settings (that are customiz ed for every Printer at t he factory and sav ed directly wit[...]

  • Page 118

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 118 Using the Magnetic Encoding tab Use this option only if the Printe r has an optiona l M agnetic Stripe Encoding M odule installed. This Section descri bes these options and the Printer 's magnetic encodin g process. Step Procedure[...]

  • Page 119

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 119 Using the Magnetic Encoding tab (continued) Step Procedure 2 Adjust the following M agnetic Encoding options a ccordingly to chan g e the ISO Standards for Trac ks 1, 2 and 3 .[...]

  • Page 120

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 120 Using the Encod ing Mode option Use the Encoding Mode option to specify the desi red, magnetic encodi ng standard. Step Procedure 1 Select the JIS II mode pro vides encodi ng compatibil ity with the JIS C 6220 Type II cards com monly u[...]

  • Page 121

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 121 Using the Coerc ivity option Use the Coercivity opt ion to select the type of M agnetic Stripe to encode . Step Procedure 1 Select High Co to set the Oersted leve l to 2750 OR Select Low Co to set the Oersted Lev el to 300. Using the M[...]

  • Page 122

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 122 Using the Magnetic Track Selection (continued) Step Procedure 1 Select a Track selection to: a. Change all options sepa rately for each of the thre e indiv idual Tracks. b. Select the Defau lt button for each of the sepa rate Tracks to[...]

  • Page 123

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 123 Revie wi ng the En able MLE Su pport checkbo x Multi-Language Ex t ension (MLE) suppor t in W ind ows XP can cause text strings to be broken up into fragmen ts. This fragmenta tion of the tex t string preve nts magnetic e ncoding. Step[...]

  • Page 124

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 124 Using the Magne tic Track Opt ions Use the Magnetic Track options for these purpos es:  Customize the IS O encoded data format for each of the Magnetic S tripe's three Tracks.  Customize each Track independe ntly of the othe[...]

  • Page 125

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 125 Using the Bit Den si ty radio buttons Use this option to cu stomiz e the Bit Recordin g Density (Bits per Inch) used to encode the magnetic data on the currently selected Track. Th e default ISO S tandard sel ections for this option ar[...]

  • Page 126

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 126 Using the A SCII Offset Use this option to cu stomiz e the Character ASCI I Offset used to encode the ma gnetic data on the currently sel ected Track. ( Note : This cha racter offse t value is subtr acted from the ASCII value o f each [...]

  • Page 127

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 127 Using the LRC Ge neration radio buttons Use this option to cu stomiz e the LRC Generatio n Mod e (used to encode the magnetic data on the currently sel ected Track). Step Procedure 1 Select NO LR C to change the LRC Genera tion to none[...]

  • Page 128

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 128 Using the Ver ification radio butto ns Use this option to cu stomiz e the encoding veri fication settings. Step Procedure 1 Select the A ut o Eject 1st Error option to instruct the Prin ter to veri f y that all magnetic data has been c[...]

  • Page 129

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 129 Using the Sh ift Data Left checkb ox Use this option to shi ft the recorded magnetic dat a to the left-hand si de of the card's Magnetic Stripe . OR Use this option for situations that re quire cards to be readable w ith insert ty[...]

  • Page 130

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 130 Revie wi ng ISO Tr ack Locations Review the magnetic encodi ng module, w hich encodes onto Tracks in acco rdance with an ISO 7811-2 M agnetic Stripe. ( Note : Refer to the diagram (bel ow) for Track locatio ns.) TR AC K 1 0.1 10 "[...]

  • Page 131

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 131 Sending Track Information Magnetic Track data is sent in the for m of text stri ngs from the appli cation so ftware to the Printer Drive r along with all of the o ther printable object s within the card design.  Magnetic Track Da ta[...]

  • Page 132

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 132 Revie wi ng Tracks 1, 2 and 3 (in table format) Review this table, which displ ays the SS, ES, FS and the vali d characters de fined for each Track. Start Sentinel End Sentinel Field Separator Valid Characters Maximum Number of Charact[...]

  • Page 133

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 133 Revie wi ng the A S CII Code and Ch aracter Table ASCII Code Character ASCII Code Charac ter ASCII Code Character 32 sp ace 56 8 80 P 33 ! 57 9 81 Q 34 " 58 : 82 R 35 # 59 ; 83 S 36 $ 60 < 84 T 37 % 61 = 85 U 38 & 62 > 8[...]

  • Page 134

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 134 Using the Lamination tab Use these options to control the P rinter's laminati on process.[...]

  • Page 135

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 135 Selecting from the Lamination Side drop down menu Use this option to cu stomiz e what side(s) of the card the Printer is suppo sed to laminate . Step Procedure 1 Select t he No La mination option to avoid usin g the Printer's buil[...]

  • Page 136

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 136 Selecting from the Lamination Typ e dropdown menu Use the Lamination Type dropdow n menu to sele ct the correct option . Step Procedure 1 Select t he Poly G uard Lamination for either the 1.0 mil or 0.6 mil thick patch. ( Note: These b[...]

  • Page 137

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 137 Selecting from Lamination Type dropdown menu (continued) Refer to the prev ious procedure.[...]

  • Page 138

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 138 Selecting Lam ination D w ell Time and Temp erature Use the Lamination window to control the Lamina tion D well Time or throughpu t speed of a card in seconds/inch as w e ll as the Lamination Temperature .  Preset Defaul t Settings:[...]

  • Page 139

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 139 Using the O v erlay / Print A rea tab Use this option to con trol how the overlay (O) pan el and/or the prin t area wi ll appear on a card. ( Note: This op tion is help f ul if, for Note, to omit o r block out the ov erlay or printin g[...]

  • Page 140

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 140 Using the Over lay / Print A rea dropdown menu Step Procedure 1 Select t he Full Ca rd option for the Printer to ov erlay and/or print the entire ca rd. OR Select the Defined A rea( s) option for the Printer to ov erlay and/or prin t o[...]

  • Page 141

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 141 Using the Over lay / Print A rea Use these Overlay / Print A rea options to contro l both the print and overlay together or control each indiv idually . Step Procedure 1 Select For Print and Ove rlay for the defined area to apply to bo[...]

  • Page 142

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 142 Using the Defined A r ea Option Step Procedure 1 Select t he Defined Area(s) option to activate the card grid in the uppe r half of the window . It is through this ca rd grid that up to five areas can be defined. Continued on the nex t[...]

  • Page 143

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 143 Using the Overlay / Print Area (continued) Step Procedure 2 W hen the card g rid is first activ ated, a small bl ack square wi ll appear at its default size of .2" x .2" / 5mm x 5mm and at its de fault location in the low er [...]

  • Page 144

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 144 Using the Overlay / Print Area (continued) Step Procedure 4 Follow this procedure once the area is sized prop erly. a. Measu re the location this desired a rea to be positi oned on the ca rd. b. Measu re from the lower le ft corner of [...]

  • Page 145

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 145 Using the Overlay / Print Area (continued) Step Procedure 5 a. Print the card design and observ e how the i mage is oriented on the card as it ejects from the P rinter. ( No te: The location o f a de fined area is based on the card ori[...]

  • Page 146

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 146 Using the Overlay / Print Area (continued) Step Procedure 6 Use t he De fined Area arrow s to navigate back and forth from area to area . ( Note: The ac tive area w ill always be highli ghted w ith a dotted outline.) a. Define another [...]

  • Page 147

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 147 Using Security Opti ons (Visual Secu r ity Solutions) The Visual Security Solutions dropdow n menu list will be used to enabl e and select which type of visual security will be used. The Visual Se curity dropdow n list will be selectab[...]

  • Page 148

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 148 Selecting Orienta tion - Land scape un der Card tab Step Procedure 1 Select t he Landscape radio button (below) under Orientation unde r the Card Size tab to use the Visual Secu rity Solutions (A to D), as show n in this wind ow.[...]

  • Page 149

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 149 Selecting the Visu al Security Solutions dropdo w n menu (A to D) Step Procedure 1 Click on the Vi sual Security Solutions dropdow n menu (below ) under the Landscape - Orienta tion (see abov e) to use the o ptions shown in this displa[...]

  • Page 150

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 150 Selecting Orienta tion - Po rtfolio und er Card tab Step Procedure 1 Select t he Portrait radio bu tton (below) under Orientation under the Card Si ze tab to use the Visua l Security Solutions (E to H), as shown in this window .[...]

  • Page 151

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 151 Selecting the Visu al Security Solutions dropdo w n menu (E to H) Step Procedure 1 Click on the Vi sual Security Solutions dropdow n menu under the Po rtrait - Orientation (see abov e) to use the op tions show n below.[...]

  • Page 152

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 152 Selecting the Ver iMark radio button Step Procedure 1 Click on either the VeriMark or Holo Mark radio b utton, as show n below. The foil options are used to control the siz e of the excl usion area. ( No te: W hen VeriM ark is selected[...]

  • Page 153

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 153 Selecting the Holo Mark radio button Step Procedure 1 Click on the Holo Mark radi o button (below) for the squared-area size.[...]

  • Page 154

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 154 Revie wi ng the Cu stom VeriMark Card (Custom Graph i c in a 2D fo il) The custom VeriM ark image is stamped on blank, standard-sized cards. Yo u can select one of eight positions (A to H), as show n in the Portrai t and Landscape samp[...]

  • Page 155

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 155 Revie wi ng the Cu stom HoloMark Card (Custo m Graph ic in a 2D foil) The custom Hol oMark image is s tamped on blan k, standard-siz ed cards. Y ou can select one of eight positions (A to H), as show n in the Portrai t and Landscape sa[...]

  • Page 156

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 156 Using SmartShie ld A r ea dropdo w n menu Use the SmartShiel d Area options, which appl y only if using the Printer's o ptional SmartGuard Secu rity Feature and the SmartSh ield option is enabled. Step Procedure 1 Select t he A pp[...]

  • Page 157

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 157 Using the Image Color tab Select the A l gebraic color matching option and then use this op tion to control the Con t rast and Gamma o f the printed ima ge, as w ell as the indivi dual color balance of Yello w , Magenta and Cyan . ( N [...]

  • Page 158

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 158 Image Color Tab (continued) Refer to the prev ious procedure.[...]

  • Page 159

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 159 Using the K Pan el Resin tab Select the K Pane l Resin option to control wh ere the resin black (K ) panel of a ful l-color ribbon is printed.  If printing with a resin -only ribbon type or a ribbo n type that does not have a K pane[...]

  • Page 160

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 160 Selecting from the Print A ll Black With K Panel option s W he n none o f the options w ithin this wind ow are selected, the Printer Driver w ill automatically print all TrueType bl ack text and bar codes only w ith the Resin Bl ack (K[...]

  • Page 161

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 161 Selecting the Ful l Card op tion Step Procedure 1 Select t he Full Ca rd option for the Printer Driv er to print the resin black (K) panel for all black found w ithin all areas of the image.[...]

  • Page 162

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 162 Selecting the Def ined A rea(s) option Step Procedure 1 Select t he Defined Area(s) option for the Printer D river to print the resi n black (K) panel for all blac k found only in a desired and de f ined area or areas.[...]

  • Page 163

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 163 Selecting the Und efi ned A rea(s) option Step Procedure 1 Select t he Undef ined A rea(s) option for the Print er Driver to print the resin blac k (K) panel for all blac k found only in the space outs ide the defined a reas. ( Note: I[...]

  • Page 164

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 164 Using the Define d A rea(s) function To define an area , refer to the followin g steps: Step Procedure 1 Click on the Defined A rea(s) check box. ( Note: This will activate the card grid in the upper hal f of the window . It is through[...]

  • Page 165

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 165 Using the Defined A r ea(s) function (continued) Step Procedure 2 a. Determine the area of the card necessary to define. In the sa mple (below), this area is indicated by the dashed ou tline. b. Determine the siz e of this area by actu[...]

  • Page 166

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 166 Using the Defined A r ea(s) function (continued) Step Procedure 4 Once the area is sized pr operly:  Measu re the location for this area to be positione d on the card.  Measu re from the lower le ft corner of the card up and over[...]

  • Page 167

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 167 Using the Defined A r ea(s) function (continued) Refer to the prev ious procedure. Continued on the nex t page[...]

  • Page 168

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 168 Using the Defined A r ea(s) function (continued) Refer to the prev ious procedure. * 1 7 23 55 * Ka r e n At k ins Acce ss Le ve l- 2 ID # 12 3447 8 Y=0. 2 “ X=1.4 “ Continued on the nex t page[...]

  • Page 169

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 169 Using the Defined A r ea(s) function (continued) Refer to the prev ious procedure. Continued on the nex t page[...]

  • Page 170

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 170 Using the Defined A r ea(s) function (continued) Step Procedure 6 Def ine another a rea by cli cking on the Defined A r ea up arrow. ( Note : Another .2" x .2" / 5mm x 5mm area will appear in the low er left-hand corne r. Thi[...]

  • Page 171

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 171 Using the Defined A r ea(s) function (continued) Step Procedure 9 a. Select between the Print YMC Unde r K and Pr int K On ly options. ( Note : W he n the Print YMC Under K optio n is selected, all black in the designated areas will pr[...]

  • Page 172

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 172 Using the Defined A r ea(s) function (continued) Refer to the prev ious procedure.[...]

  • Page 173

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 173 Using the Device Options tab Use the Dev ice Options tab to sel ect options tha t control the Printer ’ s functio ns.[...]

  • Page 174

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 174 Selecting the R ibbon Ty pe Use the Ribbon Type dropdow n m enu to select the cor rect ribbon type . Step Procedure 1 Select t he approp riate Ribbo n Ty pe option for the type o f Print Ribbon in u se.[...]

  • Page 175

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 175 Selecting from the Color Match ing option s Use the Color Ma tchings options to meet or fit the requirements o f the current print job. Step Procedure 1 Select None for print speed ra ther than print color ,  If the color is already[...]

  • Page 176

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 176 Selecting from the Resin Dither dropdo w n menu Use the Resin Di ther options acco rding to the typ e of image being printing. ( Note: This option only e ffects objects printed with a resin-onl y Print Ribbon or those objects p rinted [...]

  • Page 177

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 177 Selecting the Pr int Both Sides checkb ox Use this option to au tomatically print on both the front and backside o f a card. Step Procedure 1 a. Select t his option in conjunction w ith any appli cation program tha t supports a multipl[...]

  • Page 178

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 178 Selecting the Sp lit 1 Set of Ribbon P anels checkbox Use this option to au tomatically print full-color on the fron t of a card and resin black on the back of a card usin g any of the Full-Col or YMC+K Print Ribbon types. Step Procedu[...]

  • Page 179

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 179 Using the Print Back Side Fi rst optio n Step Procedure 1 Select t his option i f you need to print the first pa ge of a tw o-page document on the backside o f the card. The second pa ge of the document w ill be printed on the front si[...]

  • Page 180

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 180 Selecting the Pr int Back Side Only checkbox Select this option to conveni ently print the bac kside of preprinted cards, whi ch also must have their M agnetic Stripe or sma rt card chip enc oded. Selecting the Rota te Front 180 Deg re[...]

  • Page 181

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 181 Selecting the Buff er Single Card checkbox Use this option to force the Printer's memory to bu f fer or hold, only one pri nt job at a time. Step Procedure 1 Select t his option only to print to multip le Printers sharing print jo[...]

  • Page 182

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 182 Selecting the Pau se for Lo w Ribbon chec kbox Use this option to generate a de finitive w arning when the Print Ribbon is r unning low . ( Note: W he n this option is selected, the Printer wil l "beep", pause and the Ready L[...]

  • Page 183

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 183 Using the Card tab Selecting the Ca rd Size Use this dropdow n menu to select the standard , credit card siz e CR-80 cards. ( No te: The dimensions of the total print area for this card siz e appear in the Prin t W idth and Print Lengt[...]

  • Page 184

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 184 Clicking on the A bout bu tton Click the A bout button to open a dialog box containing the copy right and v ersion information about this Printer Driver so ftware. Step Procedure 1 Rev iew the information i n the dialog box (as needed)[...]

  • Page 185

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 185 Section 4: Cleani ng This Section deals w ith the Prin ter ’ s internal and external maintenance in regards to the unit's cleaning and general upkeep. ( Note: The Printer should be cleaned o n a regular basis to insure that the [...]

  • Page 186

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 186 Cleaning the Pr inthead Perform this procedu re approx imately ev ery 1,000 prints or as needed , dependi ng on the cleanliness o f the card stock and the environment in which the Printer is located. Per form this procedure (as needed)[...]

  • Page 187

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 187 Cleaning the Ca rd Feed Ro llers The Card Feed Rol lers move the card throughou t the print process . Caution: Cle an these Rollers to prev ent card jams and card contamina tion and to provide better prin t quality and extended Printhe[...]

  • Page 188

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 188 Cleaning the Card Feed Rollers (continued) Step Procedure 4 a. I nsert the Cleanin g Card in to the Card Hopper , above the Card Input Tray, as normally done with any other type of card. b. Be sure, howev er , that the shortest non- ad[...]

  • Page 189

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 189 Replacing the Cleaning Tap e The Card Cleanin g Cartridge re moves dust particl es from the top and bottom o f a blank card as it feeds into the P rinter. It acco mplishes this through two (2) Cl eaning Roll ers that are in turn, conti[...]

  • Page 190

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 190 Replacing the Cleaning Tape (continued) Step Procedure 4 Push t he sprin g-loaded Re lease Tab in and lift the used cleanin g tape and the two (2) Tape Roll ers out o f the Cartridge, as show n below . ( Note: The permanent Cleanin g R[...]

  • Page 191

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 191 Cleaning the Plat en Rolle rs Clean the Printer 's Platen Rolle rs approximately every 1,500 prints or as needed depe nding on the cleanlin ess of the card stoc k and the envi ronment in w hich the Printer is located. Step Procedu[...]

  • Page 192

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 192 Cleaning the Pr inter ’ s Ext erior The Printer has a du rable casin g that should retai n its luster and appea r ance for many years. Steps Procedures 1 Clean it only with a Cleani ng Pad from the Printe r Cleani ng Kit. Caution: Do[...]

  • Page 193

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 193 Cleaning the Mag netic Encoder Clean the Ma gnetic Encoder app roximately every 1,500 prints or as needed depend ing on the cleanliness o f the card stock and the env ironment in wh ich the Printer is located . Step Procedure 1 Remove [...]

  • Page 194

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 194 Section 5: P acking the Pro-LX Card Printer The purpose o f this section to prov ide the User w i th a specific pac king procedure for the Pro- LX Card Printer. Follow this instructio n to pack the Card Printer for t ransport. Step Pro[...]

  • Page 195

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 195 Section 6: B oard Level Diagnostics The purpose o f this section to prov ide the User w i th specific Board Lev el Diagnostic procedures for Boa rd Errors and Se nsor Testing for the Pro-LX Ca rd Printer. Board Errors Resolving the EE [...]

  • Page 196

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 196 Resolving the DRA M M emory Error Symptom: A DRA M Memory Error is displaye d on the LCD display . Step Procedure 1 Reboot t he Prin ter. 2 If the problem pe rsists, remov e the rear cove r and ensure that the S IMM (080016) is seated [...]

  • Page 197

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 197 Revie wi ng the Se nsor Location and Voltages Use this table as a reference tool for Board Lev el Diagnostics. Sensor Location Pin Low Range VD C High Range VDC Print Ribbon ID J33 3 Present .02 Not present .70 Lam Ribbon ID J2 on Enco[...]

  • Page 198

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 198 Revie wi ng the Motor Voltages (when active) Use this table as a reference tool for Board Lev el Diagnostics. Motor Location Pin VDC Print Drive Stepper J2 2 4 5 Lamination Drive Stepper J24 4 5 Print Headli ft J27 1 17.0 Lamination Ro[...]

  • Page 199

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 199 Section 7: Fargo Technical S upport The purpose o f this section to prov ide the User w i th an efficient, step-by -step procedure to be used when conta cting Far go Technical Suppor t as needed for the Pro-LX Ca rd Printer. Contacting[...]

  • Page 200

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 200 Reading the Serial Numbers on a Fargo printer The purpose o f this section is to prov ide updated instructions for readi ng serial number s on a Fargo printer. Finding out w hen a Fargo Card Pr inter was manufactu red You can determine[...]

  • Page 201

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 201 Section 8: Rev ie w ing the S pare Parts List Pro-LX ID Card Printer Recommended Spa re Parts List Effective Date: A pri l 2004 For current pricing s ee http ://www.fargopa rtner.com/suppo rt_servic es/[...]

  • Page 202

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 202 Glossary of Terms Term Definition 24-bit color A color depth for an i mage tha t uses 8 bits fo r each color (red, blue, green) combinin g the possible 256 shade s to prov ide a color depth of 16.7 milli on colors. AC - Alternatin g Cu[...]

  • Page 203

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 203 Glossary of Terms (continued) Term Definition Barcodes A series of alternating bl ack and whi te stripes, of v arying widths (each character denoted by a set number and width of black stripes) that all ows characters to be optically re[...]

  • Page 204

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 204 Glossary of Terms (continued) Term Definition Cache A type of memory bu ffer to store data temporarily , used to hold information that is most o ften exchanged betw een controller and peripheral, to exped ite data transfer . Calibratin[...]

  • Page 205

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 205 Glossary of Terms (continued) Term Definition CR-79 A card dimension s tandard of 2.0625 " L X 3.3125 " W (+/-0.002" W , +/-0.005" L) or 52 .400 X 84.150 mm. CR-80 A card dimension s tandard of 2.125" X 3.370&q[...]

  • Page 206

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 206 Glossary of Terms (continued) Term Definition Direct-to-Card (D TC) Printing The Direct-to-Card printing proces s prints digital i mages directly onto any plastic card with a smooth , clean, gloss y PVC sur face. Dither A system of dis[...]

  • Page 207

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 207 Glossary of Terms (continued) Term Definition Dwell Time The speed at whi ch the card mov es across the la m roller, measu red in seconds/inch (sec /in). This may be adjusted in the driver to ensure adhesion and card flatness. Dye Mi g[...]

  • Page 208

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 208 Glossary of Terms (continued) Term Definition Encoder (w heel) An electromechanical de vice , attached to a shaft t hat detects the change in rotatio nal positio n, incremented to coun t ticks per revolution. The Prin ter's encode[...]

  • Page 209

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 209 Glossary of Terms (continued) Term Definition Flash M emory A microchip based non -volatile memory device th at holds its data when pow er is removed. This all ows for field rep rogramming o f the Printer commands , such as Printer fir[...]

  • Page 210

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 210 Glossary of Terms (continued) Term Definition Hard Drive A high capacity s torage dev ice in a PC consistin g of non- removable magne tically encodable platters. Hardware Physical components of a sy stem such as the P rinter, the PC, t[...]

  • Page 211

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 211 Glossary of Terms (continued) Term Definition IEEE 1284 (Institu te of Electrical and Electronics Engineers 1284) A standard method of signal ing for a bi-directiona l parallel interface on personal compute rs. To ensure proper Printer[...]

  • Page 212

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 212 Glossary of Terms (continued) Term Definition Landscape A document layout that is vi ewed with the docum ent's long axi s in a horizontal orienta tion. LCD (Liquid Cry stal Display) A device that contains a liquid crystal between [...]

  • Page 213

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 213 Glossary of Terms (continued) Term Definition MB (Megaby te) A unit of storage that equ als 1,048,576 bytes. Memory A generic term for any dev ice that stores di gital in formation using magnetic media or di gital chip s torage devi ce[...]

  • Page 214

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 214 Glossary of Terms (continued) Term Definition Oversized Cards Oversiz ed cards are used for more efficient visu al identification and are avai lable in many non -standard sizes. Th e most popular sizes are CR-90 (3.63 " x 2.37&quo[...]

  • Page 215

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 215 Glossary of Terms (continued) Term Definition Pinch roller A f ree spinning (no n-driven) roll er that presses th e card a gainst the drive rolle r, on the opposi te side, to ensure an adequate normal force for proper traction. Pixel S[...]

  • Page 216

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 216 Glossary of Terms (continued) Term Definition Printhead T he devi ce on a Printer that produ ces the ima ge on the media. PVC Abbreviatio n for polyvinyl chloride, often called v inyl. PVC is the component of the 0 .002" thic k cl[...]

  • Page 217

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 217 Glossary of Terms (continued) Term Definition Resolution The number of indi vidual pix els in a graphic, take n over a giv en length, used to indi cate the sharpnes s of the pic ture and the le vel of detail. The numbe r of elements in[...]

  • Page 218

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 218 Glossary of Terms (continued) Term Definition Self-test A pre- determined p rint file used to confirm Printer operation typically sent from the driv er or stored in the Pri nter's memory. Sensor An el ectro-mechanical /electro-opt[...]

  • Page 219

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 219 Glossary of Terms (continued) Term Definition Spooling Rather than mov ing a print job dire ctly to the Print er, the job is written to the dis k so that the user can access the appli cation faster whil e Windows takes care o f printin[...]

  • Page 220

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 220 Glossary of Terms (continued) Term Definition Thermocouple A device for measuring t emperature usin g a junction o f two wi res of dissimilar metal s that produce a voltage w hen heated that varies proportion ally wi th the temperature[...]

  • Page 221

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 221 Term Definition USB (Univ ersal Serial Bus) A 1. 5M/sec (12M bit/sec) serial communication in terface that can support 127 separa te dev ices consisting of 4 w ires: power, ground, data in and d ata out. Virtual Me mory A technique use[...]

  • Page 222

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 222 Index A About button, 184 AC - Alternating Current, 202 Accepted Card Thickness, 16 Accepted Standard Card Size, 16 Access Card, 202 Access Card Slot, 22 Accessories Program Group, 44, 72 Adhesion, 202 Adjusting Card Flattener, 107 Adj[...]

  • Page 223

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 223 Cleaning Pad, 191 cleaning procedure, 46, 188 cleaning process, 187 Cleaning Roller, 204 Cleaning Roller Assembly, 188, 193 Cleaning Rollers, 189 Cleaning Tape, 190 Cleaning Tape loop, 190 Cleaning the Cleaning Rollers, 73, 74 cleaning[...]

  • Page 224

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 224 Enable MLE Support checkbox, 123 Encode Before Print checkbox, 129 Encode Before Print option, 129 Encoder (smart card), 207 Encoder (wheel), 208 Encoder Sensor, 61 Encoder TOF Sensor, 197 Encoding Mode option, 120 End Sentinel (ES)., [...]

  • Page 225

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 225 Invalid Shield, 42 ISO, 211 ISO 7811-2 Magnetic Stripe, 130 ISO encoded data format, 124 ISO option, 120 ISO Standard selections, 127 ISO Standard settings, 122 ISO Standards, 119 ISO Track Locations, 130 ITS-EMC, 15 J jammed card, 53 [...]

  • Page 226

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 226 O Oersted (Oe), 213 Offset, 213 Omit Signature Area setting, 143 On LED , 87 On LED Light, 20 On/Cancel button, 193 On/Cancel Button, 22 onscreen card design, 166 Operating Temperature, 16 option to disable, 181 optional Magnetic Strip[...]

  • Page 227

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 227 PVC laminate, 29 Q Queue, 216 R RAM (Random Access Memory), 216 Rasterize, 216 Rasterize Shield, 39 Reading Key Data, 39 Ready LED, 182 Ready LED Light, 22 Ready mode, 42 Reboot, 216 Reflective Sensor, 196 Registration, 216 Reject Hopp[...]

  • Page 228

    RESTRICTED US E ONLY Fargo Electronics , Inc. Pro-LX Lam inating Card Pri nter/Encoder Us er Guide ( Rev. 5.0) 228 supply side, ribbon, 63 Supply Voltage, 18 Surface mount, 219 Switch box, 219 System Control panel, 44 System minimum requirements, 62, 63 T TAC, 219 Technical Specifications, 17 Temp file, 219 Temperature, 30 Temperature Adjustment, 3[...]