Epson 1430Wi manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Epson 1430Wi, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Epson 1430Wi one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Epson 1430Wi. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Epson 1430Wi should contain:
- informations concerning technical data of Epson 1430Wi
- name of the manufacturer and a year of construction of the Epson 1430Wi item
- rules of operation, control and maintenance of the Epson 1430Wi item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Epson 1430Wi alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Epson 1430Wi, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Epson service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Epson 1430Wi.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Epson 1430Wi item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    BrightLink ® Pro 1420Wi/1430Wi User's Guide[...]

  • Page 2

    [...]

  • Page 3

    Contents BrightLink Pro 1420Wi/1430Wi User's Guide ........................................[...]

  • Page 4

    Connecting to a Computer for HDMI Video and Audio ..................................................[...]

  • Page 5

    Selecting Wireless Network Settings Manually .......................................................[...]

  • Page 6

    Image Aspect Ratio ...............................................................................[...]

  • Page 7

    Using the Interactive Features .....................................................................[...]

  • Page 8

    Selecting Settings for Emailing Whiteboard Pages ..................................................[...]

  • Page 9

    Maintaining and Transporting the Projector ........................................................[...]

  • Page 10

    Solutions to Projector Power or Shut-Off Problems .................................................[...]

  • Page 11

    Notices ............................................................................................[...]

  • Page 12

    [...]

  • Page 13

    BrightLink Pro 1420Wi/1430Wi User 's Guide Welcome to the BrightLink Pro 1420Wi/1430Wi User&apo[...]

  • Page 14

    Introduction to Your Projector Refer to these sections to learn more about your projector and this m[...]

  • Page 15

    Note: Color brightness (color light output) and white brightness (white light output) will vary depe[...]

  • Page 16

    Product Box Contents Save all the packaging in case you need to ship the projector. Always use the o[...]

  • Page 17

    4 Pens and batteries (one AA alkaline battery for each pen) 5 Rubber feet (BrightLink Pro 1420Wi) [...]

  • Page 18

    Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support[...]

  • Page 19

    Option or part Part number Epson DC-12 document camera (ELPDC12) V12H594020 Epson DC-20 document c[...]

  • Page 20

    Register your product online using the projector CD or at this site: epson.com/webreg . Registering [...]

  • Page 21

    Projector Part Locations Check the projector part illustrations to learn about the parts on your pro[...]

  • Page 22

    6 Exhaust vent 7 Lamp cover screw 8 Lamp cover Parent topic: Projector Part Locations Projector [...]

  • Page 23

    5 Obstacle sensor 6 Remote receiver 7 Projection window 8 Security lock port 9 Air filter cover[...]

  • Page 24

    6 Monitor Out port 7 Network ( LAN ) port 8 HDMI 2 port 9 HDMI 1/MHL port 10 Audio port 11 RS-2[...]

  • Page 25

    Projector Parts - Base 1 Ceiling mount holes (5) 2 Security cable attachment point 3 Rear foot at[...]

  • Page 26

    Related tasks Installing the Projector Feet Projector Parts - Control Panel 1 Projector status ligh[...]

  • Page 27

    Projector Parts - Interactive Pens and Pen Tray 1 Pen tip 2 Battery light 3 Power/function button[...]

  • Page 28

    1 Installation magnets 2 Mounting holes 3 Security lock hole Parent topic: Projector Part Locatio[...]

  • Page 29

    Projector Parts - Remote Control 29[...]

  • Page 30

    1 Power button 2 Capture button (captures the annotation screen and pastes it as a new whiteboard [...]

  • Page 31

    Parent topic: Projector Part Locations Projector Parts - Touch Unit The Touch Unit comes with the B[...]

  • Page 32

    Rear 1 Laser diffusion ports 2 Installation magnets 3 Guide markers (used for performing angle ad[...]

  • Page 33

    Projector Parts - Control Pad 1 Power button 2 Whiteboard button (switches to whiteboard mode) 3 [...]

  • Page 34

    13 Light emitting areas (output remote control signals) 14 Bottom cover (open to connect a USB thu[...]

  • Page 35

    Setting Up the Projector Follow the instructions in these sections to set up your projector for use.[...]

  • Page 36

    Mounted on the wall or ceiling Mounted vertically on a table to create an interactive workspace Wher[...]

  • Page 37

    mount. You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or eps[...]

  • Page 38

    Diagonal Min. ceiling Image width Image height Min. projection Distance from top image height [...]

  • Page 39

    Parent topic: Projector Placement Removing and Attaching the Cable Cover Before you can connect equ[...]

  • Page 40

    Note: These instructions require that the Touch Unit is mounted and connected according to the Inst[...]

  • Page 41

    4. Remove the markers from inside the Touch Unit. 5. Press the Menu button on the remote control o[...]

  • Page 42

    7. Select Touch Unit Setup . 8. Make sure Power is set to On . 42[...]

  • Page 43

    The Touch Unit power turns on and the indicator light turns blue. Warning: Do not look into the proj[...]

  • Page 44

    10. Turn the adjustment dials on the Touch Unit counterclockwise until you hear a click. Press the [...]

  • Page 45

    12. Match the positions so that the crosses (A) overlap with the points (B) on the marker positions[...]

  • Page 46

    • For non-magnetic screens: Use the supplied tape to secure the markets. Attach the tape so that [...]

  • Page 47

    14. Turn the adjustment dials on the Touch Unit to move the pointers so that they move inside of th[...]

  • Page 48

    Turning an adjustment dial counterclockwise moves the pointer diagonally down away from the center o[...]

  • Page 49

    The next adjustment screen is displayed. 49[...]

  • Page 50

    16. Place the markers at the top marker positions [1]. When angle adjustment is performed correctly[...]

  • Page 51

    17. Place the markers at the bottom marker positions [2]. When angle adjustment is performed correc[...]

  • Page 52

    The following confirmation screen is displayed: 52[...]

  • Page 53

    19. Trace the dots with your finger as shown. When angle adjustment is performed correctly, the tra[...]

  • Page 54

    • If the dots still remain or there are obstacles that cannot be removed, such as whiteboard tray[...]

  • Page 55

    21. If there is an obstacle that cannot be removed such as a whiteboard tray or frame, remove the t[...]

  • Page 56

    23. Perform touch calibration by pressing the Menu button on the remote control. On the Extended [...]

  • Page 57

    24. After you have finished touch calibration, store the markers inside the Touch Unit. 57[...]

  • Page 58

    25. Attach the supplied labels to the tabs on either side of the Touch Unit. Match the center of th[...]

  • Page 59

    26. Attach the dial cover. Make sure to tighten the screw at the bottom of the cover. Parent topic:[...]

  • Page 60

    2. Insert the larger front foot into the hole at the front of the projector. 1 Front foot (larger)[...]

  • Page 61

    Connecting to Computer Sources Connecting to Video Sources Connecting to an External Computer Monito[...]

  • Page 62

    1. Turn on your computer. 2. Connect the cable to your projector's USB-B port. 3. Connect th[...]

  • Page 63

    Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for[...]

  • Page 64

    2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts th[...]

  • Page 65

    If you want to use the remote control as a wireless mouse, you need to change the USB Type B setting[...]

  • Page 66

    Caution: Make sure the control pad is positioned no more than 6.5 ft (2 m) away from the projector, [...]

  • Page 67

    • OS X : The USB Display setup folder appears on your screen. Select USB Display Installer and fo[...]

  • Page 68

    Parent topic: Connecting to Video Sources Connecting to an MHL-Compatible Device If you have an MHL[...]

  • Page 69

    2. Connect the VGA connector to a Computer port on the projector. 3. Tighten the screws on the V[...]

  • Page 70

    Connecting to a Video Source for Sound You can play sound through the projector's speaker syste[...]

  • Page 71

    Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly. [...]

  • Page 72

    2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pi[...]

  • Page 73

    Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and [...]

  • Page 74

    Connecting a USB Device to the Control Pad or Projector You can connect your USB device to the USB-A[...]

  • Page 75

    1. If the device has a power button, turn off and unplug the device. 2. Disconnect the USB device [...]

  • Page 76

    Supported Printer Types You can connect to a printer with the type and command language described he[...]

  • Page 77

    • For the Epson DC-12 document camera, connect it to the projector's HDMI , Computer , or Vi[...]

  • Page 78

    Note: If you are connecting three or more projectors, connect the projectors in a chain as shown. 2[...]

  • Page 79

    2. Insert the batteries with the + and – ends facing as shown. 3. Close the battery cover and p[...]

  • Page 80

    1. Open the battery cover as shown. 2. Insert the battery with the + and – ends facing as shown.[...]

  • Page 81

    Note: If you have the optional remote control cable set (ELPKC28), you can use it instead of batteri[...]

  • Page 82

    3. Replace the cover and press it down until it clicks into place. Parent topic: Setting Up the Pro[...]

  • Page 83

    Using the Projector on a Network Follow the instructions in these sections to set up your projector [...]

  • Page 84

    Note: If your projector is connected via a LAN cable to a network that includes a wireless access po[...]

  • Page 85

    3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . [...]

  • Page 86

    6. Select the following basic options as necessary: • Projector Name lets you enter a name up to[...]

  • Page 87

    • If you must set addresses manually, turn off DHCP and enter the projector's IP Address ,[...]

  • Page 88

    Setting Restricted IP addresses WINS Server 0.0.0.0 192.0.2.x 224.0.0.0 to 255.255.255.255 If you[...]

  • Page 89

    Using Quick Wireless Connection (Windows Only) Selecting Wireless Network Settings Manually Selectin[...]

  • Page 90

    2. Unscrew and remove the cable cover if it is attached (screwdriver not included). 3. Insert the [...]

  • Page 91

    4. Replace the cable cover and tighten the screws. 5. Plug in and turn on the projector. Parent to[...]

  • Page 92

    5. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you [...]

  • Page 93

    4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 6[...]

  • Page 94

    7. Select the Wireless LAN menu and press Enter . 8. Select the settings on the Wireless LAN me[...]

  • Page 95

    Setting Options Description Wireless LAN System 802.11b/g Sets the type of wireless LAN system t[...]

  • Page 96

    Setting Options Description SSID Display On Selects whether to display the SSID on the network s[...]

  • Page 97

    Parent topic: Wireless Network Projection Selecting Wireless Network Settings in OS X Before connec[...]

  • Page 98

    3. When you finish selecting settings, select Setup complete and follow the on-screen instructions[...]

  • Page 99

    Setting Options Description User name Various user names up to 64 For WPA/WPA2-EAP security, cha[...]

  • Page 100

    Setting Options Description Setting RADIUS Server Name On For WPA/WPA2-EAP security, selects whe[...]

  • Page 101

    4. Select the Administrator Settings menu and press Enter , then select Mail Notification and p[...]

  • Page 102

    Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a probl[...]

  • Page 103

    4. Select the Administrator Setting menu and press Enter , then select the SNMP menu and press [...]

  • Page 104

    Note: If you want to use a web browser to select settings when the projector is turned off, you need[...]

  • Page 105

    2 Captures the projected image. Switch to whiteboard mode to paste the image into a new page. 3 Pr[...]

  • Page 106

    2. Open a web browser and connect to the projector by entering the IP address of the projector. Not[...]

  • Page 107

    • For the password, enter the default password admin . (You can change the Web Control password [...]

  • Page 108

    Setting Up Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Paren[...]

  • Page 109

    Parent topic: Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView O[...]

  • Page 110

    7. When you finish selecting settings, click Exit to exit the program. Parent topic: Crestron Roo[...]

  • Page 111

    Using Basic Projector Features Follow the instructions in these sections to use your projector'[...]

  • Page 112

    1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an elec[...]

  • Page 113

    If you do not see a projected image right away, try the following: • Turn on the connected comput[...]

  • Page 114

    Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and[...]

  • Page 115

    3. Select the Extended menu and press Enter . 4. Select the Language setting and press Enter . [...]

  • Page 116

    The Schedule Settings screen appears. 4. Select the Date & Time setting and press Enter . 5. [...]

  • Page 117

    Parent topic: Using Basic Projector Features Related tasks Enabling WPA or EAP Security Related top[...]

  • Page 118

    2. Press one of these keystone buttons on the control panel to display the Keystone adjustment scre[...]

  • Page 119

    3. Press a keystone button on the projector's control panel to adjust the image shape. Note: T[...]

  • Page 120

    Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to co[...]

  • Page 121

    You see the Quick Corner adjustment screen: 6. Use the arrow buttons on the projector or the remote[...]

  • Page 122

    3. To reduce the image size, press the Tele button. After you adjust the image size, the Image Shif[...]

  • Page 123

    1. Turn on the projector and display an image. 2. Adjust the image size using the Wide and Tele b[...]

  • Page 124

    3. Raise or lower the focus lever to sharpen the image. Parent topic: Using Basic Projector Feature[...]

  • Page 125

    Make sure that you aim the remote control at the projector's receivers within the angles listed[...]

  • Page 126

    Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wi[...]

  • Page 127

    Parent topic: Remote Control Operation Using the Remote Control as a Pointer You can use the projec[...]

  • Page 128

    3. Press the Source Search button on the projector, remote control, or control pad, then select th[...]

  • Page 129

    • Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down f[...]

  • Page 130

    Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the proj[...]

  • Page 131

    If you always want to use a particular aspect ratio for a certain video input source, you can select[...]

  • Page 132

    Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input si[...]

  • Page 133

    3. Press the Color Mode button on the remote control to change the Color Mode. The image appearan[...]

  • Page 134

    Note: The projector is not a medical device and cannot be used for medical diagnosis. Parent topic:[...]

  • Page 135

    Parent topic: Color Mode Controlling the Volume with the Volume Buttons You can use the Volume but[...]

  • Page 136

    Supported PC Free File Types You can project these types of files using the projector's PC Free[...]

  • Page 137

    File type Movie codec Audio codec Recording quality (extension) .mpg MPEG-2 MPEG-1 Layer 1/2 M[...]

  • Page 138

    The PC Free screen appears. 3. Do the following as necessary to locate your files: • If you need[...]

  • Page 139

    5. While projecting, use the following commands to control the display as necessary: • To rotate[...]

  • Page 140

    2. Do the following as necessary to locate your files: • If you need to display files inside a s[...]

  • Page 141

    The PC Free screen appears. 2. Do the following as necessary to locate your files: • If you need[...]

  • Page 142

    • To display a menu of pages to select from, press the Esc button. Then press the left or right [...]

  • Page 143

    Setting Options Description Screen Switching No Does not display the next file automatically Tim[...]

  • Page 144

    Adjusting Projector Features Follow the instructions in these sections to use your projector's [...]

  • Page 145

    Stopping Video Action Temporarily You can temporarily stop the action in a video or computer present[...]

  • Page 146

    1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating [...]

  • Page 147

    Related tasks Setting a Password Saving a Scheduled Event You can select projector commands you want[...]

  • Page 148

    4. Select Schedule . The Schedule Settings screen is displayed. Colored boxes on the calendar indic[...]

  • Page 149

    3. Select Time/Schedule Settings . 4. Select Schedule . The Schedule Settings screen is displayed.[...]

  • Page 150

    Related references Projector Setup Settings - Extended Menu Projector Security Features You can secu[...]

  • Page 151

    Setting a Password To use password security, you must set a password. 1. Hold down the Freeze butt[...]

  • Page 152

    7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Pas[...]

  • Page 153

    Projector Network Settings - Network Menu Related tasks Turning On the Projector Saving a User'[...]

  • Page 154

    The password screen closes. 2. If the password is incorrect, the following may happen: • You see[...]

  • Page 155

    3. Select the User's Logo setting and press Enter . You see a prompt asking if you want to u[...]

  • Page 156

    12. Select when you want to display the User's Logo screen: • To display it whenever there [...]

  • Page 157

    • To lock all buttons except the power button, select Partial Lock . You see a confirmation promp[...]

  • Page 158

    Creating a User Pattern to Display You can transfer an image to the projector and then display it as[...]

  • Page 159

    Using the Interactive Features Follow the instructions in these sections to use your projector'[...]

  • Page 160

    Annotation Mode (PC Free) Using the Interactive Pens The BrightLink interactive pens turn any wall i[...]

  • Page 161

    Note: The pen turns off automatically after 20 minutes of inactivity. Tap the pen tip or press the b[...]

  • Page 162

    • For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the[...]

  • Page 163

    • To use the pen as a mouse in PC Interactive mode, do the following: • To left-click, tap the[...]

  • Page 164

    • Using the Image Shift feature • Moving the projector Note: Move any pen you are not using aw[...]

  • Page 165

    2. Select the Easy Interactive Function setting and press Enter . 3. Select Auto Calibration an[...]

  • Page 166

    The cursor location and pen position should match after calibration. If not, you may need to calibra[...]

  • Page 167

    3. Select Manual Calibration and press Enter . 4. Adjust the image focus, if necessary. 5. Pres[...]

  • Page 168

    Note: For the most accurate calibration, make sure you touch the center of the circle. 7. Touch th[...]

  • Page 169

    Using Finger Touch Interactivity You can use your finger to perform the same functions as the intera[...]

  • Page 170

    Follow these precautions when using the Touch Unit and finger touch interactivity: • Children usi[...]

  • Page 171

    Parent topic: Using Finger Touch Interactivity Calibrating for Finger Touch Interactivity Finger to[...]

  • Page 172

    2. Select the Easy Interactive Function setting and press Enter . 3. Select Touch Unit Setup an[...]

  • Page 173

    The following screen appears: 5. Adjust the image focus, if necessary. 6. Press Enter to select Y[...]

  • Page 174

    Note: For the most accurate calibration, make sure you touch the center of the circle with the tip o[...]

  • Page 175

    Parent topic: Using Finger Touch Interactivity Related tasks Adjusting the Angle of the Touch Unit [...]

  • Page 176

    6. To write or draw on the projection surface in annotation mode or whiteboard mode, do the followi[...]

  • Page 177

    • To drag up or down on a page, or move backward or forward in a browser window, use swiping gest[...]

  • Page 178

    Note: Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac. [...]

  • Page 179

    Controlling Computer Features from a Projected Screen (PC Interactive Mode) You can navigate, select[...]

  • Page 180

    7. Select the Easy Interactive Function setting and press the Enter button. 8. Select one of the[...]

  • Page 181

    11. Select the icon, then select the icon. You can now operate the computer using the interactive[...]

  • Page 182

    3. Select the Easy Interactive Function setting and press Enter . 4. Select Advanced in the PC [...]

  • Page 183

    You see this screen: 6. Press Enter to select Yes . The mouse pointer moves toward the top left c[...]

  • Page 184

    Parent topic: Using BrightLink With a Computer Windows Pen Input and Ink Tools If you are using Win[...]

  • Page 185

    2. Select the Easy Interactive Function setting and press Enter . 3. Select Pen Operation Mode [...]

  • Page 186

    • Mode 2 when using pen input (BrightLink Pro 1430Wi) Parent topic: Windows Pen Input and Ink To[...]

  • Page 187

    • To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the inter[...]

  • Page 188

    Using the Whiteboard Toolbars You can use both pens at the same time in whiteboard mode. 1. Press t[...]

  • Page 189

    Parent topic: Whiteboard Mode The Main Whiteboard Toolbar The main whiteboard toolbar lets you draw[...]

  • Page 190

    Redo the last undo Select all objects in a rectangular area Select all objects in a freehand area Tu[...]

  • Page 191

    Blue pen (fine point on left, thick on right) Eraser (thin width on left, thick on right) Clear all [...]

  • Page 192

    Related references The Bottom Whiteboard Toolbar Related tasks Adding Templates from a Web Browser Z[...]

  • Page 193

    3. Once you have selected the image, select either the Rectangle Select or Free Select tool and d[...]

  • Page 194

    Selecting Line Width and Color You can select the color and line width for both the custom Pen and t[...]

  • Page 195

    Delete the current page Open a new page. The current page appears as a thumbnail on the bottom toolb[...]

  • Page 196

    Display a help screen for the toolbar functions Show or hide bottom toolbar Parent topic: Whiteboard[...]

  • Page 197

    1. Press the Menu button on the remote control. 2. Select the Extended menu and press Enter . [...]

  • Page 198

    5. Select the following basic options as necessary: • Administrator Password lets you enter a pa[...]

  • Page 199

    Data setting determines how often whiteboard pages are backed up automatically in case of a power o[...]

  • Page 200

    4. Select Print and press Enter . 5. Select the following printing options as necessary: • Def[...]

  • Page 201

    Related references Projector Setup Settings - Extended Menu Supported Printer Types Related tasks Co[...]

  • Page 202

    4. Select Save and press Enter . 5. Select the following options for saving as necessary: • De[...]

  • Page 203

    • User name lets you set the a user name with read/write privileges on the network folder. You ca[...]

  • Page 204

    4. Select Mail and press Enter . 5. Select the following options for emailing as necessary: • [...]

  • Page 205

    • Send a test e-mail connects to the SMTP server and sends a test email to the address you set as[...]

  • Page 206

    You see the Scan screen: 3. Select the following settings: • Select Color or Monochrome • S[...]

  • Page 207

    1. Select the Source Select icon on the projector control toolbar. An image source list appears. 2[...]

  • Page 208

    3. Select the user name for the device from which you want to project. Note: Select Refresh to upd[...]

  • Page 209

    5. Select the location where you want to save the file by selecting the Location field. Choose eit[...]

  • Page 210

    3. Do any of the following as necessary: • To add a new page, select the New page icon. A blank[...]

  • Page 211

    You see a screen like the following: 5. Select any of the following settings: • Printer to choos[...]

  • Page 212

    Your page or pages are printed. Parent topic: Whiteboard Mode Related references The Bottom Whitebo[...]

  • Page 213

    5. Use the on-screen keyboard to enter the subject that you want to appear on the Subject line. 6. [...]

  • Page 214

    Starting a Shared Whiteboard Session You can share the whiteboard with up to 15 devices on the same [...]

  • Page 215

    4. When connecting to the shared whiteboard, users must enter the PIN code. If you want to set your[...]

  • Page 216

    8. Select Stop sharing this whiteboard to end the whiteboard sharing session. 9. Select Close . P[...]

  • Page 217

    Operating Browser version Screen resolution of connected device or system computer Android Androi[...]

  • Page 218

    Tool icon Description Selects a translucent highlighter pen for drawing Selects a shape to place on[...]

  • Page 219

    Tool icon Description Creates a new whiteboard page * Images must be JPG or PNG, with a resolution [...]

  • Page 220

    4. Enter the IP address and PIN code for the projector you want to connect to. Note: To display the[...]

  • Page 221

    You see the main toolbar on the side and the projection control toolbar on the bottom of the project[...]

  • Page 222

    6. To show or hide the projection control toolbar, select the arrow. Parent topic: Annotation Mode[...]

  • Page 223

    3. To move the main toolbar to the other side of the screen, select the arrow. Note: You can use t[...]

  • Page 224

    The Main Annotation Toolbar The main annotation toolbar lets you draw and write on your projected im[...]

  • Page 225

    Redo the last undo Change custom pen color and width Write or draw free-form lines with custom pen C[...]

  • Page 226

    Zooming Images in Annotation Mode You can use the pen to zoom in on a portion of your image, the sam[...]

  • Page 227

    Stops projection and mutes audio. Touch the screen again to restore the image and sound. Pauses vide[...]

  • Page 228

    Saving Images in Annotation Mode You can save your images as .png files in the default location set [...]

  • Page 229

    You see a screen like this: 3. Select the two sources you want to display. Not all combinations of [...]

  • Page 230

    • To use PC interactive mode on the right screen, press the Menu button on the remote control, se[...]

  • Page 231

    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu s[...]

  • Page 232

    1. Press the Menu button on the control panel or remote control. You see the menu screen displayin[...]

  • Page 233

    2. Press the up or down arrow buttons to move through the menus listed on the left. The settings fo[...]

  • Page 234

    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your im[...]

  • Page 235

    Setting Options Description Color Temp. (color temperature) High Sets the overall color tone; Hig[...]

  • Page 236

    Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal se[...]

  • Page 237

    Setting Options Description Sync. Varying levels available Adjusts signal to eliminate fuzziness [...]

  • Page 238

    Setting Options Description Input Signal Auto Specifies the signal type from input sources conne[...]

  • Page 239

    Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various pr[...]

  • Page 240

    Setting Options Description Control Panel Lock Full Lock Controls projector button locking to se[...]

  • Page 241

    Setting Options Description Pattern Pattern Display Selects various pattern display options Patt[...]

  • Page 242

    Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various pro[...]

  • Page 243

    Setting Options Description Touch Unit Setup Installation Pattern Select settings for the Touch U[...]

  • Page 244

    Setting Options Description Advanced Distance of Projectors Selects various settings for interac[...]

  • Page 245

    Setting Options Description Enable Right Click On Lets you use a long pen press or finger press [...]

  • Page 246

    Setting Options Description Display Messages Selects various display options Display Background [...]

  • Page 247

    Setting Options Description Projection Front Selects the way the projector faces the screen so th[...]

  • Page 248

    Setting Options Description A/V Settings A/V Output Selects the following when the projector is [...]

  • Page 249

    Setting Options Description USB Type B Easy Interactive Function Selects what happens when you c[...]

  • Page 250

    Related tasks Connecting to a Computer for Pen Use or USB Mouse Control Turning On the Projector Sel[...]

  • Page 251

    Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network st[...]

  • Page 252

    Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions t[...]

  • Page 253

    Setting Options Description Sleep Mode On Automatically places the projector in standby mode aft[...]

  • Page 254

    Projector Information Display - Info Menu You can display information about the projector and input [...]

  • Page 255

    Information item Description Refresh Rate Displays the refresh rate of the current input source S[...]

  • Page 256

    Event ID code Cause and solution 0479 A projector system error has occurred. Turn the projector of[...]

  • Page 257

    Projector Reset Options - Reset Menu You can reset most of the projector settings to their default v[...]

  • Page 258

    Maintaining and Transporting the Projector Follow the instructions in these sections to maintain you[...]

  • Page 259

    • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe t[...]

  • Page 260

    Caution: Do not use canned air, or the gases may leave a flammable residue. Parent topic: Projector[...]

  • Page 261

    1. Turn off the projector and unplug the power cord. 2. Slide the air filter cover latch and open [...]

  • Page 262

    3. Pull the air filter out of the projector. 4. Vacuum the front of the air filter (the side with [...]

  • Page 263

    5. Place the air filter back in the projector as shown. 6. Close the air filter cover. Parent topi[...]

  • Page 264

    2. Slide the air filter cover latch and open the air filter cover. 264[...]

  • Page 265

    3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of us[...]

  • Page 266

    4. Place the new air filter in the projector as shown. 5. Close the air filter cover. Parent topic[...]

  • Page 267

    Parent topic: Projector Maintenance Replacing the Lamp Before you replace the lamp, let the project[...]

  • Page 268

    4. Slide off the lamp cover. 5. Loosen the screws securing the lamp to the projector. The screws d[...]

  • Page 269

    6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this[...]

  • Page 270

    8. Tighten the screws to secure the lamp. 9. Replace the lamp cover and tighten the screw to secur[...]

  • Page 271

    Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp M[...]

  • Page 272

    Parent topic: Projector Lamp Maintenance Replacing the Remote Control Batteries The remote control [...]

  • Page 273

    3. Insert the batteries with the + and – ends facing as shown. 4. Close the battery cover and p[...]

  • Page 274

    When the battery is low, the pen light flashes as you turn on the switch. When the battery runs out,[...]

  • Page 275

    4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used[...]

  • Page 276

    2. Twist on the new tip. Parent topic: Projector Maintenance Transporting the Projector The projec[...]

  • Page 277

    Solving Problems Check the solutions in these sections if you have any problems using the projector.[...]

  • Page 278

    Projector Light Status The lights on the projector indicate the projector status and let you know wh[...]

  • Page 279

    Power light Status light Lamp light Temp light Status and solution Blue Off Off Off Standby [...]

  • Page 280

    Power light Status light Lamp light Temp light Status and solution Off Flashing blue Off Flas[...]

  • Page 281

    3. Use the up and down arrow buttons to highlight the problem you want to solve. Note: You can also[...]

  • Page 282

    • Adjust the Brightness setting or select the Normal Power Consumption setting. • Check the[...]

  • Page 283

    Related references Projector Setup Settings - Extended Menu Related tasks Selecting an Image Source [...]

  • Page 284

    4. If necessary, check your video card settings and set the multiple display option to Mirror or Du[...]

  • Page 285

    • Check the resolution assigned to your presentation files to see if they are created for a diffe[...]

  • Page 286

    • Check the settings on the projector's Signal menu to make sure they match the video source[...]

  • Page 287

    Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or li[...]

  • Page 288

    • Check the audio cable connections between the projector and your video source. • If you do n[...]

  • Page 289

    • The projector's buttons may be locked for security. Unlock the buttons or use the remote c[...]

  • Page 290

    Parent topic: Solving Projector or Remote Control Operation Problems Related references Remote Cont[...]

  • Page 291

    Solutions When Finger Touch Interactivity Does Not Work Solutions for Problems With Capturing, Print[...]

  • Page 292

    • Make sure you have calibrated the system. Try recalibrating. • If you are projecting from a [...]

  • Page 293

    Solutions When Manual Calibration Does Not Work If you are having trouble calibrating manually, try [...]

  • Page 294

    Parent topic: Solving Interactive Problems Related references Projector Setup Settings - Extended M[...]

  • Page 295

    • For USB printing or scanning, make sure a USB cable is connected between the projector's U[...]

  • Page 296

    Solutions When the Pen Does Not Work Over a Network or the Toolbars Do Not Appear If you are having [...]

  • Page 297

    Projector Network Settings - Network Menu Solutions When You Cannot Access the Projector Through the[...]

  • Page 298

    Internet Support Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support[...]

  • Page 299

    Technical Specifications These sections list the technical specifications of your projector. General[...]

  • Page 300

    Contrast ratio 10000:1 with Auto Iris on and Normal Power Consumption mode Image size 60 inches ([...]

  • Page 301

    Lamp life Normal Power Consumption mode: Up to about 4000 hours ECO Power Consumption mode: Up to [...]

  • Page 302

    Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) [...]

  • Page 303

    Projector Environmental Specifications Temperature Operating: Up to 4921 feet (1500 m): 41 to 95 °[...]

  • Page 304

    Display format Refresh rate (in Hz) Resolution (in pixels) VGA 60/72/75/85 640 × 480 SVGA 56/6[...]

  • Page 305

    Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480p) 60 720 × 480 SDTV (576p)[...]

  • Page 306

    Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (720p) 50/60 1280 × 720 HDTV (1[...]

  • Page 307

    Parent topic: Technical Specifications Related references Projector Setup Settings - Extended Menu [...]

  • Page 308

    Notices Check these sections for important notices about your projector. Recycling Important Safety [...]

  • Page 309

    Important Safety Instructions Follow these safety instructions when setting up and using the project[...]

  • Page 310

    • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, e[...]

  • Page 311

    • Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to[...]

  • Page 312

    Parent topic: Notices Restriction of Use When this product is used for applications requiring high [...]

  • Page 313

    For Canadian Users CAN ICES-3(B)/NMB-3(B) Parent topic: Notices Wireless Telegraphy Act Regulations[...]

  • Page 314

    We provide the source code of the GPL Programs until five (5) years after the discontinuation of sam[...]

  • Page 315

    using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public [...]

  • Page 316

    1. You may copy and distribute verbatim copies of the Program's source code as you receive it, [...]

  • Page 317

    a) Accompany it with the complete corresponding machine-readable source code, which must be distribu[...]

  • Page 318

    7. If, as a consequence of a court judgment or allegation of patent infringement or for any other re[...]

  • Page 319

    NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM[...]

  • Page 320

    Also add information on how to contact you by electronic and paper mail. If the program is interacti[...]

  • Page 321

    SDL-Image cairo-1.10.2 podofo-0.91 wcecompat-1.2 The GNU Lesser General Public License Version 2 is [...]

  • Page 322

    recipients, so that they can relink them with the library after making changes to the library and re[...]

  • Page 323

    The precise terms and conditions for copying, distribution and modification follow. Pay close attent[...]

  • Page 324

    c) You must cause the whole of the work to be licensed at no charge to all third parties under the t[...]

  • Page 325

    If distribution of object code is made by offering access to copy from a designated place, then offe[...]

  • Page 326

    the user who changes the contents of definitions files in the Library will not necessarily be able t[...]

  • Page 327

    9. You are not required to accept this License, since you have not signed it. However, nothing else [...]

  • Page 328

    Each version is given a distinguishing version number. If the Library specifies a version number of [...]

  • Page 329

    Copyright (C) year, name of author This library is free software; you can redistribute it and/or mod[...]

  • Page 330

    1. Redistributions of source code must retain the above copyright notice, this list of conditions an[...]

  • Page 331

    2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pr[...]

  • Page 332

    It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT[...]

  • Page 333

    libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Gl[...]

  • Page 334

    Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". T[...]

  • Page 335

    zlib-1.1.4 zlib-1.2.3 minzip 1.01e License terms of conditions of each program which are provided by[...]

  • Page 336

    Google Web Toolkit GWT-Crypto 2.3.0 get-file-api GWT-Log DroidSansFallback License terms "Apach[...]

  • Page 337

    shall not include works that remain separable from, or merely link (or bind by name) to the interfac[...]

  • Page 338

    excluding those notices that do not pertain to any part of the Derivative Works, in at least one of [...]

  • Page 339

    Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any [...]

  • Page 340

    (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved. This copyrighted[...]

  • Page 341

    The author of this software is David M. Gay. Copyright (c) 1991 by ATT. Permission to use, copy, mod[...]

  • Page 342

    So that all may benefit from your experience, please report any problems or suggestions about this s[...]

  • Page 343

    Permission to use, copy, modify, and distribute this software is freely granted, provided that the a[...]

  • Page 344

    So that all may benefit from your experience, please report any problems or suggestions about this s[...]

  • Page 345

    Redistribution and use in source and binary forms, with or without modification, are permitted provi[...]

  • Page 346

    Copyright (c) 1997-2002 FreeBSD Project. All rights reserved. Redistribution and use in source and b[...]

  • Page 347

    1. Redistributions of source code must retain the above copyright notice, this list of conditions an[...]

  • Page 348

    Copyright (C) 1991 DJ Delorie All rights reserved. Redistribution and use in source and binary forms[...]

  • Page 349

    THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIE[...]

  • Page 350

    1. Redistributions of source code must retain the above copyright notice, this list of conditions an[...]

  • Page 351

    Copyright (c) 1998, M. Warner Losh [email protected] All rights reserved. Redistribution and use in so[...]

  • Page 352

    OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF[...]

  • Page 353

    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ARM LTD BE LI[...]

  • Page 354

    * Copyright (c) 2009 MIPS Technologies, Inc. * * All rights reserved. * * Redistribution and use in [...]

  • Page 355

    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF[...]

  • Page 356

    With respect to a Licensee offering MPEG-4 Video Decoders and/or Encoders the following notice shall[...]

  • Page 357

    pixman-0.21.6 jquery-1.7.2.min.js jquery.upload-1.0.2.min.js License terms of conditions of each pro[...]

  • Page 358

    Copyright 2008 Andre Tupinambá Copyright 2008 Mozilla Corporation Copyright 2008 Frederic Plourde C[...]

  • Page 359

    The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or t[...]

  • Page 360

    License terms of conditions of each program which are provided by owner of the copyright to the &quo[...]

  • Page 361

    The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or t[...]

  • Page 362

    * Redistributions in binary form must reproduce the above copyright notice, this list of conditions [...]

  • Page 363

    The views and conclusions contained in the software and documentation are those of the authors and s[...]

  • Page 364

    SSLeay license This projector product includes the open source software program "OpenSSL" [...]

  • Page 365

    OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF[...]

  • Page 366

    CPD-41026R2 Parent topic: Copyright Notice 366[...]