Denon AVR-4806CI manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Denon AVR-4806CI, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Denon AVR-4806CI one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Denon AVR-4806CI. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Denon AVR-4806CI should contain:
- informations concerning technical data of Denon AVR-4806CI
- name of the manufacturer and a year of construction of the Denon AVR-4806CI item
- rules of operation, control and maintenance of the Denon AVR-4806CI item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Denon AVR-4806CI alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Denon AVR-4806CI, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Denon service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Denon AVR-4806CI.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Denon AVR-4806CI item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    AV SURROUND RECEIVER A VR-4806CI OPERA TING INSTRUCTIONS[...]

  • Page 2

    2 ¢ SAFETY PRECAUTIONS ¢ NOTE ON USE / OBSERV A TIONS RELA TIVES A L ’UTILISA TION •A void high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées. T enir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Handle the power cord carefu[...]

  • Page 3

    3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. 4. [...]

  • Page 4

    4 Getting Started Thank you for choosing the DENON A VR-4806CI A V Surround Receiver . This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense[...]

  • Page 5

    5 ¢ System Setup Menu page 125, 126 page 126, 127 page 127, 128 page 128 ~ 130 page 130, 131 page 131, 132 page 132, 133 page 99, 100 page 100 page 101 page 101, 102 page 102 page 103 page 103 ~ 105 page 106, 107 page 107 page 107 page 108, 109 page 109 page 111 page 112 page 112 page 113, 114 page 115 page 116, 117 page 118 page 119 page 120 page[...]

  • Page 6

    6 Getting Started Advanced Operation Remote control unit Operating DENON audio components ................................80 ~ 82 Preset memory ......................................................................82, 83 Operating a component stored in the preset memory .......83 ~ 85 Learning function ..............................................[...]

  • Page 7

    7 Getting Started • Check that the following parts are included in addition to the main unit: q Operating instructions ..................................................1 w Wa rranty (for North America model only) .....................1 e Service station list.........................................................1 r Power supply cord ..........[...]

  • Page 8

    8 Getting Started Preparing the remote control unit • The included remote control unit (RC-1036) can be used to operate not only the A VR-4806CI but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-DENON remote control co[...]

  • Page 9

    9 Getting Started Operating range of the remote control unit • Point the remote control unit at the remote sensor on the main unit as shown on the diagram. • The remote control unit can be used from a straight distance of approximately 23 feet/7 meters from the main unit, but this distance will be shorter if there are obstacles in the way or if[...]

  • Page 10

    10 Getting Started @0 @1 @2 @3 @5 @4 #5 #6 #7 #4 #3 #2 @9 #0 #1 @8 @7 @6 q Power ON/ST ANDBY switch ................................(21) w Power indicator ........................................................(21) e Power switch ......................................................(21, 96) r Headphones jack (PHONES) .............................[...]

  • Page 11

    11 Getting Started u y o !0 !1 !2 !3 !5 !6 !7 !4 i e r t q w q Input signal indicator The respective indicator will light corresponding to the input signal. w Input signal channel indicator The channels included in the input source will light. This lights when the digital signal is inputted. e Information display This displays the surround mode, fu[...]

  • Page 12

    12 Getting Started • For details on the functions of these parts, refer to the pages given in parentheses ( ). NOTE: •W ith the A VR-4806CI, the “ZONE4”, “VCR-4” and “ZONE2 surround mode” buttons cannot be used. • For instructions on setting the remote control unit back light’ s lighting time ( page 87). Remote control unit Surr[...]

  • Page 13

    Easy Setup and Operation 13 Placing the speakers. Connecting the speakers. Connect the DVD player to the A VR-4806CI. Connect the A VR-4806CI’ s monitor output terminal to the TV’ s video input terminal ( page 17). Connecting a microphone ( page 20). Perform the preliminary measurements. The measurement of the speakers in the main listening pos[...]

  • Page 14

    14 Easy Setup and Operation ¢ Basic system layout (For a THX Ultra2 system) • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor: Subwoofer Center speaker system Surround speaker systems Surround back speaker systems Front speaker systems Set these at the sides of the TV or s[...]

  • Page 15

    15 Easy Setup and Operation Speaker connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( < with < , > with > ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. NO[...]

  • Page 16

    16 Easy Setup and Operation ¢ Connections • The A VR-4806CI can be configured for 10 speaker playback using two pairs of surround speakers (A+B) and one pair of surround back speakers as shown below . • The output of each power amplifier can be assigned to any desired channel to best suit the application. For details, refer to “Setting the C[...]

  • Page 17

    17 Easy Setup and Operation Connecting a DVD player and TV (Monitor) DVD player S VIDEO OUT COAXIAL OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y P B P R OPTICAL OUT HDMI OUT R L R L H J I A C D L •T o connect the video output from the DVD player to the A VR-4806CI, you only need to choose one connection type. Component video connection offer[...]

  • Page 18

    18 Easy Setup and Operation TV (Monitor) S VIDEO IN VIDEO IN COMPONENT VIDEO IN Y P B P R HDMI IN H J I L • For best picture quality (especially with progressive DVD and other high definition sources) choose the component video or HDMI connection to your monitor or TV . S-Video and composite video outputs are also provided if your TV does not hav[...]

  • Page 19

    19 Easy Setup and Operation The Auto Setup and Room EQ function of this unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting. The A VR-4806CI’ s Audyssey MultEQ XT function has the feature that it provides the optimum listening environment at all listenin[...]

  • Page 20

    20 Easy Setup and Operation Connecting a microphone 1 Connect the microphone for Auto Setup to the SETUP MIC jack on the front panel of the unit. 2 Mount the auto setup microphone onto a camera tripod, etc., and place it at ear height at the main listening position in the listening r oom with the sound r eceptor facing the ceiling. Microphone NOTE:[...]

  • Page 21

    21 Easy Setup and Operation Starting Auto Setup 2 Press the CURSOR D D or H H button to select “Auto Setup / Room EQ”, then press the ENTER button. • Display the “Auto Setup / Room EQ” menu screen. 1 Press the SYSTEM SETUP button. • Display the “System Setup Menu”. 4 Press the ON/ST ANDBY switch on the main unit or ON button on the [...]

  • Page 22

    22 Easy Setup and Operation 4 If the check ends, press the ENTER button again. [ Second screen ] 3 Check the results of the speaker detection, then press the ENTER button. • Switch to the second screen. The screen shown at the below appears once the preliminary measurements are completed. Preliminary measurements • This procedure is used to aut[...]

  • Page 23

    23 Easy Setup and Operation 4 Perform step 2, 3 repeatedly . The more measurement points, the better the resulting room correction effect. We recommend a minimum of 6 measurement points – 8 measurement points provides the best room correction effect. 5 After measuring at the number of points according to your listening envir onment, press the CUR[...]

  • Page 24

    24 Easy Setup and Operation Check of the measurement result • The results of the measured items can be checked. 1 Press the CURSOR D D or H H button to select items, then press the ENTER button. • Switch to the verification screen. Example: Speaker Config. Check 2 Press the ENTER button. • Switch to the second screen. Example: Speaker Config.[...]

  • Page 25

    25 Easy Setup and Operation Measures Cause Screen example About the error message • These error messages will be displayed when performing the measurements of Auto Setup and the automatic measurements can not be completed because of the speaker arrangement, measurement environment, or other factors. Please check the following matters, reset the p[...]

  • Page 26

    Connecting Other Sources 26 Cable indications Signal direction Audio and Video cable • The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied). V ideo cable Audio cable NOTE: • Do not plug in the power supply cord until all connections have been completed. • When making connections[...]

  • Page 27

    27 Connecting Other Sources • The A VR-4806CI is equipped with a function for up and down converting video signals. Because of this, the A VR-4806CI’ s MONITOR OUT terminal can be connected to the TV (monitor) with a set of cables offering a higher quality connection, regardless of how the player and the A VR-4806CI’ s video input terminals a[...]

  • Page 28

    28 Connecting Other Sources Connecting equipment with HDMI terminals [T o convert analog video signals to HDMI signals] TV (Monitor) HDMI IN DVD player S VIDEO OUT COAXIAL OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y P B P R OPTICAL OUT L R L R L H J I A C D • The A VR-4806CI is equipped with a function for converting analog video signals in[...]

  • Page 29

    29 Connecting Other Sources Connecting a DBS tuner Connecting a TV tuner H I A TV tuner S VIDEO OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y P B P R OPTICAL OUT R L R L J D DBS / BS Tuner S VIDEO OUT COAXIAL OUT R L AUDIO OUT VIDEO OUT OPTICAL OUT R L R L H I A D C • For best picture quality choose the component video connection to your DBS [...]

  • Page 30

    30 Connecting Other Sources Connecting the external inputs (EXT . IN) terminals DVD-Audio-Video / Super Audio CD Player / External decoder R SURROUND BACK L R SURROUND L R FRONT L 7.1ch AUDIO OUT CENTER SUB- WOOFER L R L R R L R L B A B A R L R L A • These terminals are for inputting multi-channel audio signals from an outboard decoder , or a com[...]

  • Page 31

    31 Connecting Other Sources Connecting a DVD recorder DVD recorder S VIDEO OUT S VIDEO IN R L AUDIO IN R L AUDIO OUT VIDEO OUT VIDEO IN OPTICAL IN OPTICAL OUT R L R L H H I I A R L R L A D D COMPONENT VIDEO OUT Y P B P R J • For best picture quality choose the component video connection to your DVD recorder . S-Video and composite video outputs a[...]

  • Page 32

    32 Connecting Other Sources Connecting a CD player R L AUDIO OUT CD player COAXIAL OUT OPTICAL OUT R L R L A C D Connecting a VCR Video deck S VIDEO IN R L AUDIO IN R L AUDIO OUT VIDEO IN S VIDEO OUT VIDEO OUT R L R L H I H I A R L R L A • There are three sets of video deck (VCR) terminals, so three video decks can be connected for simultaneous r[...]

  • Page 33

    33 Connecting Other Sources Connecting a CD recorder or MD recorder R L AUDIO IN R L AUDIO OUT CD recorder / MD recorder OPTICAL OUT OPTICAL IN R L R L A R L R L A D D Connecting a turntable AUDIO OUT GND Turntable (MM cartridge) R L A •Y ou can connect the turntable (MM cartridge) to the PHONO terminals. NOTE: • The phono input can accept sign[...]

  • Page 34

    34 Connecting Other Sources Connecting a tape deck R L AUDIO IN R L AUDIO OUT Tape deck R L R L A R L R L A DENON LINK connection DVD player DENON LINK E • High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible DVD player . • Digital transfer and multi-channel pl[...]

  • Page 35

    35 Connecting Other Sources Connecting equipment with HDMI terminals DVD player HDMI OUT TV (Monitor) HDMI IN L L •A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-Definition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources, and the mu[...]

  • Page 36

    36 Connecting Other Sources Connecting equipment with DVI terminals DVD player TV (Monitor) HDMI IN DVI-D OUT COAXIAL OUT OPTICAL OUT K L D C R L AUDIO OUT R L R L A • Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images. Make a n analog or digital audio connection also. NOTE: • [...]

  • Page 37

    37 Connecting Other Sources Connecting IEEE1394 devices DVD player IEEE1394 F • For the digital transfer of signals from Super Audio CDs and DVD-Audio discs, connect using an IEEE1394 cable. For instruction s on playing Super Audio CDs ( page 94). • Assign the IEEE1394 input the input source. For details, see “Setting the IEEE1394 Assign” ([...]

  • Page 38

    38 Connecting Other Sources Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND 1 4 2 3 ¢ AM loop antenna assembly Connect to the AM antenna terminals. Remove the vinyl tie and take out the connection line. Bend [...]

  • Page 39

    39 Connecting Other Sources Connecting the CONTROL terminals These terminals are used for an external controller . Perform the following operation before using an external controller connected to the RS- 232C terminal: 1. Press the ON/ST ANDBY button on the main unit and set the unit to the operating mode. 2. Perform the operation to turn off the p[...]

  • Page 40

    40 Connecting Other Sources Connecting the TRIGGER OUT terminals Tu rn the DC 12V voltage on and off for the individual functions and surround modes. For details, see “Setting the T rigger Out” ( page 119). Connecting the MUL TI ZONE terminals Power amplifier (ZONE2 or ZONE3) R L IN TV (Monitor) (ZONE2 or ZONE3) S VIDEO IN VIDEO IN + + RC-617 I[...]

  • Page 41

    41 Connecting Other Sources ZONE2/ZONE3 speaker out connections • When the power amplifier is assigned to the ZONE2 or ZONE3 output channel at “Power Amp Assign” in the “System Setup Menu”, the MAIN ZONE speaker terminals can be used as the ZONE2 or ZONE3 speaker out terminals ( page 116, 117). • The connections diagram below is an exam[...]

  • Page 42

    42 Connecting Other Sources Connecting the power supply cord AC 120V , 60Hz AC outlets (wall) Power supply cord (Supplied) NOTE: • Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances. • Insert the plugs securely . Incomplete connections will result in the generation of noise. AC OUTLET[...]

  • Page 43

    Basic Operation 43 Operating the remote control unit • The RC-1036 remote control has a backlit EL display whose contents change according to the mode or function selected, with the appropriate remote commands for that mode or function. Playback ¢ Operate the this unit The AMP button is the main mode for controlling the A VR-4806CI in the main r[...]

  • Page 44

    44 Basic Operation Playing the input source 1 Select the input source to be played. Example: CD (Main unit) (Remote control unit) To select the input source when ZONE2 SELECT , ZONE3/REC SELECT or TUNING PRESET is selected, press the SOURCE button on the main unit then operate the input function selector . SOURCE PHONES EXT.IN ANALOG ROOM EQ HOME T[...]

  • Page 45

    45 Basic Operation Playback using the external input (EXT . IN) terminals Press the EXT . IN button on the main unit or INPUT MODE button on the remote contr ol unit to switch the external input. When operating the remote contr ol unit: • Cancelling the external input mode: Press the INPUT MODE or ANALOG button to switch to the desired input mode[...]

  • Page 46

    46 Basic Operation Press the ON SCREEN button. Each time an operation is performed, a description of that operation appears on the display connected to A VR- 4806CI’ s VIDEO MONITOR OUT terminal. Also, the unit’ s operating status can be checked during playback. Such information as the position of the input selector and the surround settings is[...]

  • Page 47

    47 Basic Operation ¢ Input mode display • In the AUTO mode • In the DIGIT AL PCM mode • In the DIGIT AL DTS mode • In the ANALOG mode Depending on the input signal. • In the EXT . IN mode Press the ANALOG button on the main unit or INPUT MODE button on the remote contr ol unit to switch to the analog input. ¢ Selecting the analog mode A[...]

  • Page 48

    48 Basic Operation Flat: This the frequency response of all speakers flat. This is suitable for multi-channel music reproduction, from discrete music sources such as Dolby Digital 5.1, DTS, DVD-Audio and Super Audio CD. Room EQ function Press the ROOM EQ button. • The Room EQ switches as follows each time the ROOM EQ button is pressed. OFF Audyss[...]

  • Page 49

    49 Basic Operation Surround Playing modes for different sources • The A VR-4806CI is equipped with many surround modes. We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source. is a 6.1-channel/7.1-channel surround mode. Sources recorded in Dolby Digital Surround EX THX SURROU[...]

  • Page 50

    50 Basic Operation HOME THX CINEMA ENTER SURROUND PARAMETER DIRECT/STEREO CURSOR PURE DIRECT ON SCREEN CURSOR DIRECT/STEREO PURE DIRECT HOME THX CINEMA SURROUND PARAMETER ENTER Press the DIRECT/STEREO button to select the STEREO mode. ¢ STEREO mode Use this mode to adjust the tone and achieve the desired sound. • The system setup function cannot[...]

  • Page 51

    51 Basic Operation 1 Press the HOME THX CINEMA button to select “Home THX Cinema” mode. 2 Play a program sour ce with the mark. For operating instructions, refer to the manuals of the respective components. 3 Press the SURROUND P ARAMETER button. • Display the “Surround Parameter” menu. 4 Press the CURSOR D D or H H button to select the p[...]

  • Page 52

    52 Basic Operation • In addition, screen information is displayed in the following order when the ON SCREEN button is pressed repeatedly: OSD-1 Audio input signal OSD-2 Monitor information OSD-3 Input/output OSD-4 Auto surround mode OSD-5 USER MODE 1 OSD-6 USER MODE 2 OSD-7 USER MODE 3 OSD-8~14 T uner preset stations NOTE: • OSD-2: The monitor?[...]

  • Page 53

    53 Basic Operation (2) (2ch source) OFF: Playback is conducted without using the surround back speaker . ON: Playback is conducted using the surround back speaker . This operation can be performed directly pressing the SURROUND BACK button. ¢ Surround parameters w MODE/SB CH OUT : Select the surround back channel playback method or mode. (1) (Mult[...]

  • Page 54

    Press the SURROUND BACK button. Lights when the Surround Back CH is on. 54 Basic Operation Dolby Digital mode and DTS Surround (only with digital input) 1 Press the ST ANDARD button to select “ST ANDARD (Dolby/DTS Surround)” mode. 2 Play a program sour ce with the , mark. • The Dolby Digital indicator lights when playing Dolby Digital sources[...]

  • Page 55

    55 Basic Operation ¢ Dialogue Normalization Dialogue Normalization (Dial Norm) is a feature of Dolby Digital, which is used to keep the programs at the same average listening level so the user does not have to change the volume control between Dolby Digital programs. When playing back software which has been encoded in Dolby Digital, sometimes you[...]

  • Page 56

    56 Basic Operation Dolby Pro Logic II x (Pro Logic II ) mode •T o play in the PL II x mode, set “Sp.Back” at the Speaker Configuration setting to “1spkr” or “2spkrs”. •T o play in the PL II x mode, set “Surround Back” at the Power Amp Assign setting. • This mode is optimal for playing program sources recorded in Dolby Surround[...]

  • Page 57

    57 Basic Operation ¢ Surround parameters r Pro Logic II x and Pro Logic II Mode: Select one of the modes (“Cinema”, “Music”, “Pro Logic” or “Game”). The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended for stereo music and surround-encoded stereo music sou[...]

  • Page 58

    58 Basic Operation 5 Press the CURSOR D D or H H button to select the various surround parameters. 7 Press the ENTER or SURROUND P ARAMETER button to complete the setting. 6 Press the CURSOR F F or G G button to adjust the parameters setting. •W hen “Default Y es” is selected and the CURSOR F F button is pressed, “MODE” and “TONE” are[...]

  • Page 59

    59 Basic Operation ¢ Parameters MODE: • DH1: Reference room (small room with weak reverberations). • DH2: Live room (room with a bit stronger reverberations than DH1). • DH3: Large room (larger room than DH1, offers a sense of distance and sound diffusion effects). • BYP ASS: Stereo sound. DECODER: Select this when playing analog, PCM or o[...]

  • Page 60

    60 Basic Operation Memory and call-out functions (USER MODE function) • The A VR-4806CI is equipped with a function for storing the selected input source, the auto surround mode and input mode in the memory and selecting these settings when you want to use them. • Three patterns of settings can be stored in the memory pressing the USER MODE but[...]

  • Page 61

    WIDE SCREEN 61 Basic Operation DENON original surround modes • The A VR-4806CI is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of nine preset surround modes can be selected according to the program source and the parameters can be adjusted accor[...]

  • Page 62

    62 Basic Operation SURROUND PARAMETER CURSOR DSP SIMULATION ENTER 7CH STEREO DSP SIMULATION 7CH STEREO CURSOR SURROUND PARAMETER ENTER DSP surround simulation 1 Select the surround mode for each input channel. Example: DSP surround simulation mode The surround mode switches in the following order each time the DSP SIMULA TION button is pressed: (Re[...]

  • Page 63

    63 Basic Operation ROOM SIZE: This sets the size of the sound field. There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field. ¢ Surround parameters y EFFECT : This parameter turns the effect signals with mu[...]

  • Page 64

    64 Basic Operation 5 Press the CURSOR D D or H H button to select “Bass” or “T reble”. 6 Press the CURSOR F F or G G button to set the level. To increase the bass or treble: The bass or treble sound can be increased to up to +6 dB in steps of 1 dB. To decrease the bass or treble: The bass or treble sound can be decreased up to –6 dB in st[...]

  • Page 65

    65 Basic Operation Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played. 1 Press the ENTER button. • Display the “Channe[...]

  • Page 66

    66 Basic Operation Manual tuning 1 Set the input source to “TUNER”. 2 Press the TU (TUNER) button to select the TUNER mode. 3 W atching the display , pr ess the BAND button to select the desired band (AM, FM or XM). When listening to the XM satellite Radio ( page 71). FUNCTION TUNING PRESET MEMORY ON SCREEN CHANNEL NUMBER SHIFT BAND MODE MEMORY[...]

  • Page 67

    67 Basic Operation Checking the preset stations • The preset (broadcast) stations can be checked on the on screen display . Press the ON SCREEN button (in the AMP mode) r epeatedly until the “T uner Preset Stations” screen appears on the OSD. Recalling preset stations ¢ Recalling preset stations from the remote control unit •P reset statio[...]

  • Page 68

    68 Basic Operation RDS search 1 Set the input source to “TUNER”. 3 Press the RDS SEARCH button until “RDS SEARCH” appears on the display . • Use this function to automatically tune to FM stations that provide RDS service. RDS SEARCH FM PTY SEARCH RT ON TP SEARCH Display The main unit’ s display switches as follows each time the RDS SEAR[...]

  • Page 69

    69 Basic Operation 5 Press the CHANNEL button. • Automatically begin the PTY search operation. If there is no station broadcasting the designated program type with above operation, all the reception bands are searched. The station name is displayed on the display after searching stops. PTY search 1 Set the input source to “TUNER”. 3 Press the[...]

  • Page 70

    70 Basic Operation 4 Press the CHANNEL button. • Automatically begin the TP search operation. If no TP station is found with above operation, all the reception bands are searched. The station name is displayed on the display after searching stops. 5 To continue sear ching, repeat step 3. If no other TP station is found when all the frequencies ar[...]

  • Page 71

    71 Basic Operation XM Satellite Radio ¢ Introducing XM Satellite Radio There’ s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio. Select from over 170 channels of music, news, sports, comedy , talk, and entertainment. Coast-to-coast coverage. Digital quality sound. With all music channels 100% commercial free. Questions?:[...]

  • Page 72

    72 Basic Operation Channel selection 1 Set the input source to “TUNER”. 2 Press the TU (TUNER) button to select the TUNER mode. 3 W atching the display , pr ess the BAND button to select the XM mode. (Main unit) (Remote control unit in the AMP mode) XM040 DeepTrks Song title/Artist name Channel name Channel number 4 Press the TUNING • or ª b[...]

  • Page 73

    73 Basic Operation Using the Network Audio Function Internet radio function • The A VR-4806CI can be connected to a network by cable to listen to Internet radio or music files stored on computers. Internet radio refers to radio programs broadcast over the Internet. There are many stations throughout the world broadcasting Internet radio programs.[...]

  • Page 74

    74 Basic Operation ¢ Personal Computer Install “Windows Media Connect” on your computer . The required system for forming a music server is as described below . 1) OS (Operating System): Windows® XP Service pack2 2) Processor: Intel Pentium II or AMD processor , etc.. We recommend 1 GHz or greater . 3) RAM: Min. 128 MB, we recommend 256 MB or[...]

  • Page 75

    75 Basic Operation ¢ Network settings When using a broadband router (DHCP function), the network settings are made automatically , so there is no need to make the settings from the setup menu. If the broadband router’ s DHCP function is turned off, make the “Network Setup” ( page 123, 124). • The required system connections and settings mu[...]

  • Page 76

    76 Basic Operation If no button is operated for approximately ten seconds, the regular display reappears. Registered presettings can be checked on the on screen display . The presettings can only be displayed with the on screen display when the “NetAudio” function is selected. NOTE: • Registered presettings are deleted when they are overwritt[...]

  • Page 77

    77 Basic Operation ¢ Listening to Internet radio stations registered in your favorites 1 When the “NetAudio” function is selected, press the CURSOR D D or H H button to select “Favorites”, then press the ENTER or CURSOR G G button. • The Internet radio stations registered in your favorites are displayed. 2 Press the CURSOR D D or H H but[...]

  • Page 78

    78 Basic Operation ENTER CURSOR FUNCTION CURSOR AUX MEMORY MODE TUNING ENTER Select “Radio List V ersion” to display the current version. Updating the list of radio stations 1 Press the MODE button to select the configuration mode, then press the ENTER or CURSOR G G button. • The settings screen appears. 2 Press the CURSOR D D or H H button t[...]

  • Page 79

    79 Basic Operation 4 Press the CURSOR D D or H H button to select the music file, then press the ENTER or CURSOR G G button. •C onnection starts, and playback starts once the buffer reaches “100%”. Press the CURSOR H H button to select the next file, the CURSOR D D button to select the previous file. During playback, press the ENTER button on[...]

  • Page 80

    Advanced Operation 80 Remote control unit Operating DENON audio components HOME MODE SELECTOR 1 Press the MODE SELECTOR buttons to select the component you want to operate. • The icon for the selected mode flashes. This function switches as shown below each time one of the AMP button is pressed. Example: Select “AMP” mode. : AMP , ZONE2, ZONE[...]

  • Page 81

    81 Advanced Operation 1. CD player (CD), CD recorder (CDR) system buttons Default setting = CD The preset codes of a CDR can be recorded in the CD mode so that the CD recorder can be operated ( page 82). It is only possible to set the preset memory for either the CD or CDR. To operate a DENON CDR player , preset “30626” or “31868”. T o retu[...]

  • Page 82

    82 Advanced Operation Preset memory 1 Press the MODE SELECTOR button for the component you want to preset. Presetting is not possible for the AMP , ZONE2, ZONE3, ZONE4, TUNER and SYSTEM CALL modes. 2 Press and hold the RC SETUP button for at least three seconds. • The top IR segment blinks twice. 3 Referring to the included List of Preset Codes ([...]

  • Page 83

    Advanced Operation 83 Operating a component stored in the preset memory 1 Press the MODE SELECTOR button for the component you want to operate. 2 Operate the component. For details, refer to the component’ s operating instructions. Some models cannot be operated with this remote control unit. • For the DVD player remote control buttons, functio[...]

  • Page 84

    84 Advanced Operation 2. Satellite (SA T) tuner , cable (CABLE) system buttons SRC ON : Power on SRC OFF : Power off SETUP : Setup DISP : Guide MENU : Menu • , ª , 0 0 , 1 1 : Cursor up, down, left and right ENTER : Enter CH +, – : Switch channels +, – 0 ~ 9, +10 : Number When there are codes usable for the preset device, those codes are sen[...]

  • Page 85

    85 Advanced Operation 4. Monitor or TV system buttons SRC ON : Power on SRC OFF : Power off SETUP : Setup MENU : Menu • , ª , 0 0 , 1 1 : Cursor up, down, left and right ENTER : Enter DISP : Guide CH +, – : Switch channels +, – 0 ~ 9, +10 : Number TV/VCR : Switch between TV and video player When there are codes usable for the preset device, [...]

  • Page 86

    86 Advanced Operation 5 Point the remote contr ol units directly at each other and press and hold in the button on the other remote contr ol unit which you want to “learn”. • The display turns on again and the IR segment blinks twice to indicate that the code is successfully captured. Other remote control unit Other buttons can be “learned?[...]

  • Page 87

    87 Advanced Operation ¢ Using the system call function 1 Press the AMP button to select the SYSTEM CALL mode. 2 Press the SYSTEM CALL button (1 to 3) at which the system call signals have been stored. • The stored signals are transmitted successively . Punch Through • Buttons used in the CD, DVD, and VCR modes can be assigned to the buttons wh[...]

  • Page 88

    88 Advanced Operation Setting the brightness • The brightness of the display can be adjusted in 5 levels. • The default brightness setting is level 3 (level 5 = brightest). NUMBER RC SETUP IR segment MODE SELECTOR CHANNEL SYSTEM CALL Resetting ¢ Resetting the single learned button ¢ Resetting the learned buttons 1 Press and hold the RC SETUP [...]

  • Page 89

    89 Advanced Operation ¢ All reset function ¢ Resetting the punch through setting 1 2 1 Press the MODE SELECTOR button (TV or SA T / CBL) you want to reset. Press and hold the RC SETUP button for at least three seconds. • The IR segment blinks twice. Press the 9 , 8 , 4 button (9 → 8 → 4) to select a setting . • The IR segment blinks twice[...]

  • Page 90

    90 Advanced Operation Multi zone music entertainment system •W hen the outputs of the “ZONE2 (ZONE3)” OUT terminals are wired and connected to power amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2 (ZONE3) on the di[...]

  • Page 91

    91 Advanced Operation ¢ When using the power amplifier as the ZONE2/ZONE3 output • When the power amplifier is assigned to the ZONE2 or ZONE3 output channel at “Power Amp Assign” in the “System Setup Menu”, the MAIN ZONE speaker terminals can be used as the ZONE2 or ZONE3 speaker out terminals ( page 116, 117). [System configuration and [...]

  • Page 92

    92 Advanced Operation FUNCTION ZONE3/REC SELECT ZONE2 SELECT 1 Press the ZONE2 SELECT button to display the “ZONE2 SOURCE” on the display . 2 T urn the FUNCTION knob to select the source you want to output appears on the display . 3 Start playing the source to be output. For operating instructions, refer to the manuals of the respective compone[...]

  • Page 93

    Advanced Operation 93 4 The volume of the outputs of the different zones can be adjusted with the VOLUME button on the remote contr ol unit. The output level can be controlled only if the zone volume level is set “variable” at “V olume Control” in the “System Setup Menu” ( page 118). DEF AUL T VOLUME SETTING ZONE2 : –40 dB ZONE3 : –[...]

  • Page 94

    Advanced Operation 94 Other function FUNCTION DIRECT/STEREO ZONE3/REC SELECT PHONES INPUT MODE SURROUND MODE INPUT MODE DIRECT/STEREO SURROUND MODE ON SCREEN CD Playing Super Audio CDs with an IEEE1394 cable 1 Select the input source to which IEEE1394 was assigned at the “IEEE1394 Assign” ( page 102) in the system setup. Example: CD (Main unit)[...]

  • Page 95

    95 Advanced Operation Multi-source recording / playback 1 Press the ZONE3/REC SELECT button until “RECOUT SOURCE” appears on the display . • The “REC” indicator lights. 2 T urn the FUNCTION knob to select the source you wish to record. 3 Set the recording mode. For operating instructions, refer to the manual of the component on which you [...]

  • Page 96

    96 Advanced Operation Initialization of the Microprocessor • In very rare instances, the A VR-4806CI internal microprocessor might lock up, or otherwise cause mis- operation. This might be caused due to an AC line surge or line spike noise, or by static electric discharge on or nearby the unit, or to connected components. If the condition cannot [...]

  • Page 97

    97 Navigating through the System Setup Menu Audio In Setup *System Setup •Y ou can change setting using the buttons on the front panel or remote control unit. [ On screen display ] [ Display ] 3 4 5 7 Digital In *Audio In Setup CD : COAX1 *Digital In Exit *System Setup 2 Press the SYSTEM SETUP button. • The “System Setup Menu” appears. 3 Pr[...]

  • Page 98

    98 Advanced Setup – Part 1 • The A VR-4806CI is equipped with an intuitive and easy-to-understand on screen display , and is equipped with an alpha-numeric front panel display tube that can also be used to check and adjust settings. We recommend that you use the on screen display when you make system adjustments. Some representative front panel[...]

  • Page 99

    99 Advanced Setup – Part 1 Setting the Digital In Assignment • This setting assigns the digital input terminals of the A VR- 4806CI for the different input sources. 1 Press the CURSOR D D or H H button to select “Audio Input Setup” at the “System Setup Menu”, then press the ENTER button. • Display the “Audio Input Setup” menu scre[...]

  • Page 100

    100 Advanced Setup – Part 1 1 Press the CURSOR D D or H H button to select the input source, then pr ess the CURSOR F F or G G button to select “DLINK”. 2 Press the CURSOR D D or H H button to select “DLINK” setting, then press the CURSOR F F or G G button to select the input signal (ANALOG, EXT . IN or IEEE1394). If the signal cannot be [...]

  • Page 101

    101 Advanced Setup – Part 1 Setting the Input Function Level • Correct the playback level of the different input sources. • Adjust the playback levels of the devices connected to the different input sources to the same level to eliminate the need for adjusting the main volume each time the input source is switched. 1 Press the CURSOR D D or H[...]

  • Page 102

    Advanced Setup – Part 1 102 To reset the input source name to the default value, press the CURSOR F F or G G button to highlight the input source display , then press the CURSOR H H button . When “Default Y es” is selected, then press the CURSOR F F button to reset to the default input source name. 5 Once all the characters have been input, p[...]

  • Page 103

    103 Advanced Setup – Part 1 Setting the IEEE1394 Auto Function • Set whether or not to automatically play the IEEE1394 device when it is selected with the FUNCTION knob. 1 Press the CURSOR D D or H H button to select “IEEE1394 Auto Func.” at the “Audio Input Setup” menu, then press the ENTER button. • Display the “IEEE1394 Auto Func[...]

  • Page 104

    104 Advanced Setup – Part 1 ¢ Preset Skip • When selecting preset channels pressing the CHANNEL + or – button, it is possible to skip specific preset channels. 1 Press the CURSOR D D or H H button to select “Preset Skip” at the “T uner Presets” scr een, then press the ENTER button. • Switch to the “Preset Skip ”screen. 2 Press [...]

  • Page 105

    105 Advanced Setup – Part 1 4 Repeat step 3 to input the preset channel name. To reset the input source name to the default value, press the CURSOR F F or G G button to highlight the input source display , then press the CURSOR H H button . When “Default Y es” is selected, then press the CURSOR F F button to reset to the default name. 5 Once [...]

  • Page 106

    106 Advanced Setup – Part 1 V ideo Setup •M ake the video-related settings. Setting the HDMI / DVI In Assignment • This setting assigns the HDMI input terminals and DVI input terminal for different input sources. • Set the method for playing the audio signals included in the HDMI input signal. 2 Press the CURSOR D D or H H button to select [...]

  • Page 107

    107 Advanced Setup – Part 1 Setting the Component In Assignment • This setting assigns the component video input terminal of the A VR-4806CI for the different input sources. 1 Press the CURSOR D D or H H button to select “Component In Assign” at the “Video Setup” menu, then press the ENTER button. • Display the “Component In Assign?[...]

  • Page 108

    108 Advanced Setup – Part 1 2 Press the CURSOR D D or H H button to select the setting, then press the CURSOR F F or G G button to select the parameter . Analog to HDMI Convert: • ON: Setting for converting analog video signals into HDMI signals. • OFF: Setting for not converting analog video signals into HDMI signals. Color Space: • Y Cb C[...]

  • Page 109

    109 Advanced Setup – Part 1 • “Aspect”, “Resolution” “Color Space” and “RGB Mode Setup” are only displayed when “Analog to HDMI Convert” is set to “ON”. • When connecting to an HDCP compatible monitor equipped with DVI-D terminal using an HDMI/DVI-D converter cable, the signals are output in RGB format, regardless of t[...]

  • Page 110

    11 0 Advanced Setup – Part 1 Display Mode: • Mode 1: Flickering is not prevented. • Mode 2: Prevents flickering of the on screen display when there is no video signal. Use this mode if the on screen display does not appear in the Mode 1, as may happen according to the TV being used. Setting the On Screen Display (OSD) • Use this to turn the[...]

  • Page 111

    111 Advanced Setup – Part 1 Setting the 2ch Direct/Stereo • Set this when you want to change the speaker settings when the surround mode is set to the 2-channel Direct or Stereo mode. 1 Press the CURSOR D D or H H button to select “Advanced Playback” at the “System Setup Menu”, then press the ENTER button. • Display the “Advanced Pl[...]

  • Page 112

    11 2 Advanced Setup – Part 1 Setting the Dolby Digital Setup • Sets the down-mixing method when not using a center speaker or surround speakers. 1 Press the CURSOR D D or H H button to select “Dolby Digital Setup” at the “Advanced Playback” menu, then press the ENTER button. • Display the “Dolby Digital Setup” screen. 2 Press the [...]

  • Page 113

    11 3 Advanced Setup – Part 1 Setting the Manual EQ Setup • Allows you to adjust the tonal quality of the various speakers (except the subwoofer) while listening to a music source. 1 Press the CURSOR D D or H H button to select “Manual EQ Setup” at the “Advanced Playback” menu, then press the ENTER button. • Display the “Manual EQ”[...]

  • Page 114

    11 4 Advanced Setup – Part 1 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. •T he “System Setup Menu” reappears. 7 • “Base Curve Copy” is displayed after performing the Auto Setup. •T o restore the settings to their defaults, select “Default Y es 0 ”, then press the CURSOR F F button. 1 Pre[...]

  • Page 115

    11 5 Advanced Setup – Part 1 Option Setup •M ake other expert settings. Setting the Channel Setup •W ith this setting it is possible to change the number of channels played in the different zones according to the purpose. This configures the A VR-4806CI according to whether or not you have surround “B” speakers connected, and whether or n[...]

  • Page 116

    11 6 Advanced Setup – Part 1 Setting the Power Amplifier Assignment •A VR-4806CI’ s power amplifiers for seven channels (except the front channel), can be assigned to any channels in the MAIN ZONE, ZONE2 or ZONE3 and output to the speakers. In this way , power amplifiers not being used in the MAIN ZONE can be assigned for multi-zone use, the [...]

  • Page 117

    11 7 Advanced Setup – Part 1 S. Back: If no surround back speakers are used in the main room, their amplifier channels can be assigned for other uses, or one of the two channels can drive one surround back speaker in the main room, while the other channel can drive a monaural speaker in another zone. • Front: This provides a bi-amp mode for the[...]

  • Page 118

    11 8 Advanced Setup – Part 1 V olume Limit: Set the upper limit for the volume for the different zones. • –20 dB, –10 dB, 0 dB: The volume cannot be increased above the selected levels. • OFF: If you do not want to set a volume limit, select “OFF”. In this case, the volume can be set to the A VR- 4806CI’ s maximum volume (output) le[...]

  • Page 119

    11 9 Advanced Setup – Part 1 Setting the T rigger Out • Three 12 V DC T rigger Outputs on the rear panel can be used to control other devices with compatible trigger inputs, such as motorized screens, motorized screen masking, motorized drapes, and other trigger -controlled devices. •S et the DC output supplied from the trigger out terminals [...]

  • Page 120

    120 Advanced Setup – Part 1 ZONE2 and ZONE3 tone control and channel level setting • Adjust the sound output from ZONE2 and ZONE3. 1 Press the CURSOR D D or H H button to select “Zone2/3 T one/Ch Lev .” at the “Option Setup” menu, then press the ENTER button. • Display the “Zone2/3 T one/Ch Lev .” screen. 2 Press the CURSOR D D or[...]

  • Page 121

    121 Advanced Setup – Part 1 Setting the Digital Out Assignment • The optical digital output terminals on the A VR-4806CI’ s rear panel (OPTICAL2 to 4 OUT) normally function in association with the ZONE3/REC SELECT mode. With this setting, the OPTICAL 2 OUT terminal can be used in association with the ZONE2 SELECT mode. 1 Press the CURSOR D D [...]

  • Page 122

    122 Advanced Setup – Part 1 • The system setup settings can be locked so that they cannot be changed easily . 1 Press the CURSOR D D or H H button to select “Setup Lock” at the “Setup Memory / Lock” screen, then pr ess the ENTER button. • Switch to the “Setup Lock” screen. 2 Press the CURSOR F F button to select “ON”, to lock [...]

  • Page 123

    123 Advanced Setup – Part 1 Network Setup • If you are using a broadband router (DHCP function), there is no need to make the settings at “Setting the IP Address” and “Setting the Proxy”, since the DHCP function is set to “ON” in the A VR-4806CI’ s default settings. • If the A VR-4806CI is being used connected to a network witho[...]

  • Page 124

    124 Advanced Setup – Part 1 •M ake this setting when connecting to the Internet via a proxy server . 1 Press the CURSOR D D or H H button to select “Proxy” at the “Network Setup” scr een, then press the ENTER button. • The “Proxy” screen appears. 2 Press the CURSOR F F or G G button to select “ON”. • The proxy server is enab[...]

  • Page 125

    Advanced Setup – Part 2 125 Setting the type of speakers 1 Press the CURSOR D D or H H button to select “Speaker Setup” at the “System Setup Menu”, then press the ENTER button. • Display the “Speaker Setup” menu screen. • The composition of the signals output to each channels and the frequency response are adjusted according to th[...]

  • Page 126

    126 Advanced Setup – Part 2 ¢ Parameters Large: Select this when using speakers that can fully reproduce deep bass well below 80 Hz. Y es / No: Select “Y es” when a subwoofer is installed, “No” when a subwoofer is not installed. Small: Select this when using speakers that are not capable of handling deep bass well below 80 Hz. Most home [...]

  • Page 127

    127 Advanced Setup – Part 2 Setting the Delay T ime 1 Press the CURSOR D D or H H button to select “Delay T ime” at the “Speaker Setup” menu, then press the ENTER button. • Display the “Delay T ime” screen. • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. ?[...]

  • Page 128

    128 Advanced Setup – Part 2 4 Press the CURSOR F F or G G button to set the distance between the center speaker and listening position. Example: When the distance is set to 10 feet for the center speaker The distance changes in units of 1 foot (0.1 meters) or 0.1 foot (0.01 meters) each time the button is pressed. Select the value closest to the [...]

  • Page 129

    129 Advanced Setup – Part 2 3 Press the CURSOR D D or H H button to select “Surr . Sp.”, then press the CURSOR F F or G G button to select the surround speaker(s) fr om which you want to produce the test tone (A, B or A+B). Surr . Sp. : A Adjusts the balance of the playback level between the channels when using surround speaker A. Surr . Sp. [...]

  • Page 130

    130 Advanced Setup – Part 2 • When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’ s own volume control. • When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect all surround modes. Consider this mode a Master Channel Level[...]

  • Page 131

    131 Advanced Setup – Part 2 • Please set all THX Certified speakers to small and the crossover to 80 Hz. •W e recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker , setting it to a different frequency may improve frequency response near the crossover frequency . • The crossover frequency mod[...]

  • Page 132

    132 Advanced Setup – Part 2 • For the “WIDE SCREEN” and “7CH STEREO” DSP simulation modes, the surround speakers can be set separately . ¢ About Speaker type setting when using both surround speakers A and B • If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B[...]

  • Page 133

    133 Advanced Setup – Part 2 1 Press the CURSOR D D or H H button to select “Surround Back Speaker Position” at the “THX Audio Setup” screen, then pr ess the ENTER button. 2 Press the CURSOR F F or G G button to select the settings according to the distances of the two surround back speakers ( page 127 : ), then press the ENTER button. •[...]

  • Page 134

    134 Advanced Setup – Part 2 Setting the Room EQ Setup 1 Press the CURSOR D D or H H button to select “Room EQ Setup” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • Display the “Room EQ Setup” screen. • Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ. All: Sets the Equalizer for[...]

  • Page 135

    135 Advanced Setup – Part 2 Setting the Direct Mode Setup 1 Press the CURSOR D D or H H button to select “Direct Mode Setup” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • Display the “Direct Mode Setup” screen. • Perform the ON/OFF setting of Room EQ when the surround mode is “DIRECT” or “PURE DIRECT”.[...]

  • Page 136

    136 Advanced Setup – Part 2 Check the parameter 1 Press the CURSOR D D or H H button to select “Parameter Check” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • Display the “Parameter Check” screen. • The results of the measured items can be checked. • The EQ parameters that were set in Auto Setup can be check[...]

  • Page 137

    137 Advanced Setup – Part 2 9 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. • The “Auto Setup / Room EQ” menu reappears. 10 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. • The “System Setup Menu” reappears.[...]

  • Page 138

    Page Default settings Speaker Setup Page Default settings Auto Setup / Room EQ 138 Advanced Setup – Part 2 1. Auto Setup/Room EQ 1 Auto Setup Room EQ Setup 2 Direct Mode Setup 4 Set the ON/OFF setting of Room EQ, in the case of the surround mode is in “Direct” or “Pure Direct”. 3 Mic Input Select Set this to switch the Mic Input jack for [...]

  • Page 139

    Page Default settings Advanced Playback V ideo Setup Page Default settings Audio Input Setup Page Default settings 139 Advanced Setup – Part 2 3. Audio Input Setup 99, 100 Digital In Assign This assigns the digital input terminals for the different input sources. Input source Digital Inputs CD DVD VDP TV DBS VCR-1 VCR-2 COAX 1 COAX 2 COAX 3 OPT 1[...]

  • Page 140

    Page Default settings Network Setup Option Setup Page Default settings 140 Advanced Setup – Part 2 6. Option Setup 1 Channel Setup The number of channels that you wish to play back in each zone are assigned to each zone accordingly . Main Zone Surr .B = Used, S.Back = 2sp Zone2 Zone3 Stereo Stereo 115 2 Power Amp Assign To suit your preference, a[...]

  • Page 141

    Symptom Cause Measures Page T roubleshooting 141 If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the Operating Instructions? 3. Are the speakers, and other connected components operating properly? If this unit is not operating properly , check the items listed in t[...]

  • Page 142

    Symptom Cause Measures Page 142 T roubleshooting The HDMI audio is not output. • The A VR-4806CI does not play HDMI audio signals. • The HDMI audio signals are not output from the connected monitor device. • Set the HDMI audio playback setting at the “HDMI/DVI In Assign” settings to “AMP”. • Set the HDMI audio playback setting at th[...]

  • Page 143

    Additional Information 143 • Other types of audio: These signals are designed to recreate a 360° sound field using three to five speakers. In this case the speakers should surround the listener from all sides to create a uniform sound field from 360°. Ideally the surround speakers should function as “point” sound sources in the same way as [...]

  • Page 144

    144 Additional Information Surround back speakers The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.1-channel system. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conventional multi surround speakers. In addit[...]

  • Page 145

    145 Additional Information Speaker setting examples Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose. [1] For THX Surround EX systems (using surround back speakers) q Basic setting for primarily watching movies T[...]

  • Page 146

    146 Additional Information • Set the front speakers, center speaker and subwoofer in the same positions as in example q . • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method q . • Connect the sur[...]

  • Page 147

    147 Additional Information [2] When not using surround back speakers Subwoofer Surround speakers Front speakers 45° Monitor Center speaker [ As seen from above ] Front speaker 60 to 90 cm [ As seen from the side ] Surround speaker • Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible. Set the cente[...]

  • Page 148

    Media Dolby Digital output terminals Playback method (reference page) DVD 1 Others (satellite broadcasts, CA TV , etc.) Optical or coaxial digital output (same as for PCM) 1 Optical or coaxial digital output (same as for PCM) Set the input mode to “AUTO” ( page 47). Set the input mode to “AUTO” ( page 47). 148 Additional Information ¢ Dolb[...]

  • Page 149

    149 Additional Information [2] DTS Digital Surround DTS Digital Surround (also called simply DTS) is a multi- channel digital signal format developed by Digital Theater Systems. DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center , surround left and surround right) as well as the stereo 2-channel mod[...]

  • Page 150

    150 Additional Information [3] DTS-ES™ DTS-ES is a new multi-channel digital signal for mat developed by Digital Theater Systems, Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals. Thi[...]

  • Page 151

    151 Additional Information [4] DTS 96/24 The sampling frequency , number of bits and number of channels used for recording of music, etc., in studios has been increasing in recent years, and there are a growing number of high quality signal sources, including 96 kHz/24 bit 5.1-channel sources. For example, there are high picture/sound quality DVD v[...]

  • Page 152

    152 Additional Information ¢ THX Ultra2™ Before any home theater component can be THX Ultra2 certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 logo, which is your guarantee that the Home Theater products you purchase will give you[...]

  • Page 153

    153 Additional Information [6] THX™ Surround EX™ In 1999, a new surround system was launched simultaneously with the release of the movie “Star Wars Episode I”. “Dolby Digital Surround EX” is a new movie sound track that greatly enhances the sense of spatial expression and the positioning of the surround channel sound. The result is 360[...]

  • Page 154

    154 Additional Information The two diagrams below illustrate two examples of microphone placement for two types of seating arrangements. There are six measuring positions shown in each case. Increasing the number of measuring points will provide a better sampling of the listening area and produce better results. The dotted line represents the area [...]

  • Page 155

    155 Additional Information About IEEE1394 IEEE1394 is an international standard established by the “IEEE” (Institute of Electrical and Electronics Engineers) of the United States. The A VR-4806CI can be connected to an IEEE1394 compatible device using an IEEE1394 cable to enable digital transfer of multi-channel audio sources (DVD Audio discs, [...]

  • Page 156

    156 Additional Information vT uner This is an Internet radio free online contents server . Note that usage fess are included in upgrade costs. For inquiries about this service, visit the vT uner site below . vT uner website: http://www .radiodenon.com This product is protected by certain intellectual property rights of Nothing Else Matters Software[...]

  • Page 157

    Surround Mode 157 Additional Information Surround modes and parameters C : Signal / Adjustable E : No signal / Not adjustable B :T urned on or off by speaker configuration setting C : Able E : Unable NOTE1 : BASS +6 dB, TREBLE 0 dB NOTE2 : BASS +6 dB, TREBLE +4 dB NOTE3 : This parameter is availabe when the “MODE” is set to “CINEMA”. NOTE4 [...]

  • Page 158

    158 Additional Information Surround Mode PURE DIRECT , DIRECT DSD DIRECT DSD MUL TI DIRECT MUL TI CH DIRECT STEREO EXT . IN MUL TI CH IN WIDE SCREEN HOME THX CINEMA (2ch) HOME THX CINEMA (5.1ch) DOLBY PRO LOGIC II x DOLBY PRO LOGIC II DTS NEO:6 DOLBY DIGIT AL DTS SURROUND 7CH STEREO SUPER ST ADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VID[...]

  • Page 159

    159 Additional Information ¢ Differences in surround mode names depending on the input signals E E C C C C C C E E E E E E E E E E E E E E E E E E E E E E E 4 C C E E E E E C E C C C C E E E E E E E C C E E E E C C C C C C C E E E E E C C C C C C E E E E E E E E E E E E E E E E E E E E E E E 4 C C E E E E E C E C C C C E E E E E E E C C E E E E C [...]

  • Page 160

    160 Additional Information Surround Mode Super Audio CD Button Note DTS ES DSCRT (With Flag) Input signals DTS DOLBY DIGIT AL ANALOG LINEAR PCM DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGIT AL EX (With Flag) DOLBY DIGIT AL EX (With no Flag) DOLBY DIGIT AL (5.1ch) DOLBY DIGIT AL (3, 4, 5ch) DOLBY DIGIT AL (2ch) DVD-AUDIO DVD-Audio (multi[...]

  • Page 161

    V ideo convert 161 Additional Information Relationship between the video input signal and monitor output according to the video convert mode settings MAIN ZONE NOTE: • The MAIN ZONE video conversion function is compatible with the following format: NTSC, P AL, SECAM, NTSC4.43, P AL-N, P AL-M and P AL-60. • When SECAM signals of video input are [...]

  • Page 162

    162 Additional Information C C : Signal input E E : No signal E E : Not output ✳ 1: On screen display superimposed on video signal and output. ✳ 2: On screen display superimposed on S-Video signal and output. : On screen display only displayed for SYSTEM SETUP , SURROUND P ARAMETER and ON SCREEN buttons. V ideo convert VIDEO S-VIDEO HDMI COMPON[...]

  • Page 163

    Specifications 163 ¢ Audio section • Power amplifier Rated output: Front: 140 W + 140 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) 165 W + 165 W (6 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) Center: 140 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) 165 W (6 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) Surround (A, B): 140 W + [...]

  • Page 164

    164 Specifications ¢ T uner section [FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10 –15 W) [AM] Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) S/N (IHF-A): MONO 77 dB 50 dB STEREO 72 dB T otal Harmonic Distortion ([...]

  • Page 165

    1 PRESET CODE List of preset codes / Liste de codes préréglés DVD 3D Lab 40539 Acoustic Solutions 40713, 40730, 41242 Advent 41016 AEG 40770, 40790 AFK 41051 Afreey 40698 Aim 40699, 40778, 40833, 41165 Airis 41250 Aiwa 40533, 40641 Akai 40690, 40705, 40770, 40790, 40884, 40899, 41089, 41115 Akira 40699 Akura 41051 Alba 40539, 40672, 40695, 40699[...]

  • Page 166

    2 PRESET CODE Denver 40699, 40778, 41107, 41165, 41353, 41359 Desav 40770 Desay 40800, 41407 Diamond 40651, 40768, 40790 Dick Smith Electronics 40833, 41730 Digihome 40713 digiRED 40717 Digitor 40651, 40690 Digitrex 40672, 41056, 41100 DIGIXmedia 40826 DiK 40774, 40831 Disney 40675, 41270 DiViDo 40705 DK Digital 40831 DMT ech 40783 Dragon 40831 DSE[...]

  • Page 167

    3 PRESET CODE Momitsu 41082 MTlogic 41265 Mustek 40730, 41730 Mx Onda 40651 NAD 40591, 40692, 40741 Naiko 40770, 41004 Narita 41115 NEC 40591, 40692, 40785, 40869, 41404 Nesa 40717 Nevir 40770, 40831 NextBase 40826 NexxT ech 41402 Nintaus 41051 Norcent 40872, 41003, 41107, 41265 Nordmende 40774, 40831 Noriko 40752 Nu-T ec 40516 Okano 40752 Olidata [...]

  • Page 168

    4 PRESET CODE Shinco 40717 Shinsonic 40533, 40839 Silva 40831 Silva Schneider 40831 Singer 40690, 40768 Skantic 40539, 40713, 41003 Skymaster 40730, 40768 Slim Art 40784 Slim Devices 40533 SM Electronic 40690, 40730, 40768 Smart 40705, 40713 Sonai 40755 Sonashi 40831 Sonic Blue 40783, 40869, 41099 Sony 40533, 40573, 40864, 41033, 41431, 41533 Sound[...]

  • Page 169

    5 PRESET CODE CyberHome 41129 Denon 40490 Dick Smith Electronics 41730 Digitrex 41056 DSE 41730 Funai 40675, 41334 Gateway 41073, 41158 Go Video 40741, 41158, 41304, 41730 iLo 41348 JVC 41164 LG 40741 LiteOn 41158, 41416, 41440 Loewe 40741 Magnavox 40646 Mitsubishi 41403 Mustek 41730 NEC 41404 Panasonic 40490 Philips 40646, 41158 Pioneer 40631 Pola[...]

  • Page 170

    6 PRESET CODE American High 20035 Amoisonic 20479 Amstrad 20000, 20072, 20278 Anam 20037, 20162, 20226, 20240, 20278 Anam National 20162, 20226, 21562 Anitech 20072 Ansonic 20000 Apelsound 20209 Aristona 20081 ASA 20037, 20081 Asha 20240 Asuka 20037, 20038 Audiosonic 20072, 20278 Audiovox 20037, 20278 Aw a 20037, 20043, 20278, 20642 Baird 20000, 20[...]

  • Page 171

    7 PRESET CODE Hypson 20000, 20037, 20072, 20209, 20278 iBUYPOWER 21972 Imperial 20000 Ingersoll 20209, 20240 Inno Hit 20072, 20432 inotech 20278 Interbuy 20072 Interfunk 20081, 20104 Internal 20278 International 20037, 20278, 20642 Intervision 20000, 20209, 20278 IR 20041, 20042, 20045, 20047, 20072, 20081, 20104, 20209, 20226, 20240, 20348 Irradio[...]

  • Page 172

    8 PRESET CODE Niveus Media 21972 Noblex 20240 Nokia 20041, 20042, 20046, 20048, 20081, 20104, 20240, 20278, 20315 Nordmende 20041, 20067, 20320 Northgate 21972 Novatronic 20209 Nu-T ec 20209 Oceanic 20000, 20041, 20046, 20048, 20081, 20104 Okano 20072, 20209, 20278, 20315, 20348 Olympus 20035, 20226 Onida 20162 Onimax 20642 Onkyo 20222 Optimus 2003[...]

  • Page 173

    9 PRESET CODE SEI 20081 Seleco 20037, 20041 Semp 20045 Sentra 20072 Serie Dorada 20037 Sharp 20037, 20048, 20209, 20807 Shinco 20000 Shintom 20072, 20104 Shivaki 20037 Shogun 20240 Siemens 20037, 20046, 20081, 20104, 20320, 20347 Siera 20081 Silva 20037 Silver 20278 Singer 20045, 20072, 20348 Sinudyne 20081, 20209 Smaragd 20348 Sonic Blue 20614, 20[...]

  • Page 174

    10 PRESET CODE T eac 20000, 20037, 20041, 20072, 20278, 20642 Te c 20072 T ech Line 20072 T echnics 20035, 20081, 20162, 20226 T echniSat 20209 T eco 20035, 20037, 20038, 20041, 20048 T edelex 20037, 20209, 20348, 20642 Te knika 20000, 20035, 20037 T eleavia 20041 T elefunken 20041, 20067, 20209, 20240, 20278, 20320, 20642 T elestar 20037 T eletech[...]

  • Page 175

    11 PRESET CODE Akito 10037 Akura 10009, 10037, 10218, 10264, 10282, 10359, 10412, 10668, 10714, 11037 Alaron 10179, 10216 Alba 10009, 10036, 10037, 10163, 10216, 10218, 10235, 10247, 10355, 10371, 10418, 10443, 10487, 10581, 10668, 10714, 11037 Albatron 10700, 10843 Albiral 10102 Alfide 10672 Alkos 10035 Allorgan 10206, 10217 Allstar 10037 Ambassad[...]

  • Page 176

    12 PRESET CODE Chengdu 10009, 10817 Ching T ai 10003, 10009, 10092, 10179 Chun Y un 10000, 10003, 10009, 10092, 10179, 10180, 10700, 10843 Chunfeng 10009, 10264 Chung Hsin 10036, 10053, 10108, 10180 Chungfeng 10412 Chunsun 10009, 10817 Cimline 10009, 10218 Cinema 10672 Cineral 10092, 10451 Citizen 10030, 10039, 10046, 10056, 10060, 10092, 10186, 10[...]

  • Page 177

    13 PRESET CODE Dual 10037, 10217, 10259, 10394, 10531, 10544, 11137 Dual T ec 10217 Dumont 10017, 10019, 10070, 10087, 10102 Dunai 10544 Durabrand 10003, 10171, 10178, 10180, 10463, 11034, 11463 DVX 10891 Dwin 10720, 10774 Dynatron 10012, 10037 E-Elite 10218 Ecco 10706, 10773 ECE 10037 Edison-Minerva 10487 Elbe 10217, 10238, 10259, 10292, 10361, 10[...]

  • Page 178

    14 PRESET CODE GE 10021, 10027, 10030, 10047, 10051, 10055, 10092, 10093, 10109, 10135, 10178, 10180, 10282, 10287, 10335, 10451, 10560, 10625, 11147, 11347, 11447, 11454 GEC 10037, 10072, 10163, 10217, 10361, 10516 Geloso 10009, 10363, 10374 General 10186, 10590 General T echnic 10009 Genesis 10009, 10037 Genexxa 10009, 10163, 10218 Gericom 10808,[...]

  • Page 179

    15 PRESET CODE Haiyan 10264, 10412, 10817 Halifax 10217 Hallmark 10178 Hammerstein 10060, 10264 Hampton 10216, 10217 Hanimex 10218 Hankook 10019, 10030, 10056, 10178, 10180, 10628 Hanseatic 10009, 10037, 10087, 10195, 10217, 10282, 10320, 10361, 10377, 10394, 10428, 10499, 10544, 10556, 10634, 10661, 10714, 10808, 11137 Hantarex 10009, 10037, 10102[...]

  • Page 180

    16 PRESET CODE Irradio 10218, 10247, 10290, 10371 IRT 10451, 10628, 10698, 11661 Isukai 10037, 10218, 10282, 10455 ITC 10217, 10320 ITS 10216, 10264, 10371 ITT 10163, 10179, 10193, 10208, 10339, 10346, 10361, 10473, 10480, 10544, 10548, 10610 ITT Nokia 10163, 10179, 10208, 10339, 10346, 10361, 10363, 10473, 10480, 10548, 10606, 10610 ITV 10037, 102[...]

  • Page 181

    17 PRESET CODE Matsui 10009, 10011, 10035, 10036, 10037, 10072, 10163, 10177, 10191, 10195, 10208, 10217, 10235, 10335, 10355, 10363, 10371, 10433, 10443, 10455, 10487, 10516, 10544, 10556, 10579, 10629, 10714, 11037 Matsushita 10051, 10250, 10650 Matsuviama 10587 Maxam 10264 Maxdorf 10773 Maxent 11755 MCE 10009 Mediator 10012, 10037 Medion 10037, [...]

  • Page 182

    18 PRESET CODE Noblex 10154, 10180 Nobliko 10070, 10102, 10216 Nokia 10109, 10163, 10179, 10208, 10320, 10339, 10346, 10359, 10361, 10374, 10473, 10480, 10548, 10606, 10610, 10631 Norcent 10748, 10824 Nordic 10217 Nordmende 10037, 10109, 10163, 10195, 10287, 10335, 10560, 10714 Norfolk 10163 Normerel 10037 Noshi 10018 Novak 10012, 10037 Novatronic [...]

  • Page 183

    19 PRESET CODE Panama 10037, 10217, 10247, 10264 Panashiba 10001 Panasonic 10037, 10051, 10054, 10055, 10108, 10163, 10208, 10226, 10250, 10361, 10367, 10508, 10516, 10548, 10650, 10853, 11310, 11410, 11650 Panavision 10037, 10411 Panda 10009, 10051, 10208, 10226, 10264, 10412, 10508, 10698, 10706, 10780, 10817, 10821, 10826, 10848, 10891 Pathe Cin[...]

  • Page 184

    20 PRESET CODE Rex 10163, 10206, 10259, 10264, 10363, 10411 RFT 10037, 10072, 10087, 10264, 10370, 10428 Rhapsody 10185, 10216 Ricoh 10037 Rinex 10264, 10418, 10698, 10773 Roadstar 10009, 10037, 10218, 10264, 10282, 10418, 10668, 10714, 11037 Robotron 10087 Rover 10036 Rowa 10009, 10037, 10216, 10217, 10264, 10556, 10587, 10698, 10712, 10748, 10817[...]

  • Page 185

    21 PRESET CODE Show 10009, 10072, 10418, 10706 Siarem 10087, 10102, 10516 Siemens 10032, 10037, 10146, 10157, 10191, 10195, 10200, 10361, 10535 Siera 10012 Siesta 10370 Signature 10016 Silva 10037, 10216, 10361, 10648 Silva Schneider 10037 Silver 10036, 10037, 10179, 10361, 10455, 10715 SilverCrest 11037 Simpson 10186, 10187 Singer 10009, 10087, 10[...]

  • Page 186

    22 PRESET CODE T exet 10009, 10216, 10217, 10218, 10374 ThemeScene 10887 Thomson 10037, 10109, 10287, 10335, 10560, 10625, 11447 Thorn 10035, 10036, 10037, 10072, 10073, 10104, 10109, 10163, 10193, 10238, 10335, 10359, 10361, 10499, 10512, 10535 Thorn-Ferguson 10073, 10193, 10238, 10499 T iane 10093, 10817 TMK 10056, 10177, 10178 TML 11756 TNCi 100[...]

  • Page 187

    23 PRESET CODE Unic Line 10037, 10455 United 10037, 10606, 10714, 10715, 11037 Universal 10027, 10037 Universum 10009, 10011, 10032, 10036, 10037, 10070, 10104, 10105, 10146, 10157, 10163, 10170, 10177, 10191, 10200, 10217, 10247, 10264, 10290, 10346, 10361, 10362, 10370, 10411, 10418, 10421, 10473, 10480, 10492, 10512, 10535, 10544, 10556, 10618, [...]

  • Page 188

    24 PRESET CODE CABLE ABC 00003, 00007, 00008, 00011, 00013, 00014, 00017, 00237 ADB 01063, 01269 Aichi Denshi 01512 Alcatel 00896 Allegro 00153, 00315 Americast 00899 Amstrad 01222 Antronix 00022 Archer 00022, 00153, 00797 Auna 00277, 01269 Austar 00012, 00276 Bell & Howell 00014 Bell South 00899 Birmingham Cable Communications 00276 British T [...]

  • Page 189

    25 PRESET CODE Paragon 00000 Philips 00013, 00153, 00317, 00619, 00817, 01305 Pioneer 00144, 00533, 00877, 01500, 01877 Popular Mechanics 00400 Pulsar 00000 PVP Stereo Visual Matrix 00003 Quasar 00000 Quiero 00817 RadioShack 00015, 00315, 00797, 00883 RCA 00021, 01256 Recoton 00400 Regal 00020, 00259, 00273, 00279 Regency 00002 Rembrandt 00011 Runc[...]

  • Page 190

    26 PRESET CODE Arcus 01143 Arion 01205 Armstrong 00243 Arnion 01300 ASA 00397 Asat 00200 ASCI 00114, 01334 ASLF 00713 AssCom 00853 AST 00321, 00351 Astacom 00668, 00710 Aston 00142, 01261 Astra 00243, 00607, 00713 Astrastar 00548 Astro 00133, 00173, 00358, 00369, 00501, 00520, 00548, 00607, 00613, 00658, 01099, 01100, 01113 Athena 00668 Atsat 01300[...]

  • Page 191

    27 PRESET CODE Foxtel 00455, 00497, 00720, 00879, 01162, 01173, 01176, 01356 Fracarro 00421, 00668, 00871 Freecom 00173, 00421, 00501 Freesat 00882 Fresat 00885 FTEmaximal 00331, 00369, 00713, 00794, 00863, 01209, 01449 Fuba 00115, 00173, 00299, 00369, 00396, 00417, 00421, 00573, 01161, 01214 Fugionkyo 01105 Galaxis 00115, 00369, 00592, 00692, 0083[...]

  • Page 192

    28 PRESET CODE Kathrein 00114, 00115, 00123, 00173, 00200, 00249, 00331, 00358, 00442, 00480, 00553, 00613, 00658, 00713, 00742, 00818, 00898, 01057, 01221, 01561, 01567 Kathrein Eurostar 00115 Kenwood 00853 Key West 00132, 00794 Kiton 00114 Klap 00668, 00710 Kolon 00421 Konig 00607 Koscom 00834, 01043, 01334, 01409 Kosmos 00331, 00442 KR 00592, 00[...]

  • Page 193

    29 PRESET CODE Max 00607 Maximum 01075, 01334 MB 00605 MDS 01225 Mediacom 01206 Mediamarkt 00243 MediaSat 00292, 00501, 00853 Medion 00132, 00299, 00369, 00713, 01043, 01075, 01161, 01232, 01334, 01412 Medison 00713 Mega 00200 Melectronic 00818 Memorex 00269, 00724 Metronic 00084, 00132, 00136, 00243, 00421, 00520, 00613, 00713, 00818, 00885, 01205[...]

  • Page 194

    30 PRESET CODE Pro Visat 00520 Prod 00573, 00639, 00723, 00873 Profile 00710 Promax 00455 Prosat 00628, 01173 Proscan 00392, 00566 Protek 01567 Proton 01535 ProVision 00520 Pye 00571 Pyxis 00834 QNS 01367, 01404 Quadral 00369, 00628, 00668, 00710, 01012 Quelle 00115, 00299, 00607, 00742 Radiola 00200 RadioShack 00869 Radix 00285, 00396, 00882, 0111[...]

  • Page 195

    31 PRESET CODE T ivo 01142, 01442, 01443, 01444 T okai 00200 T onna 00455, 00501, 00587, 00592, 00668, 00713, 00834 T opfield 01206, 01207, 01545 T oshiba 00082, 00455, 00486, 00749, 00790, 01285, 01446, 01501, 01516, 01530, 01749 TPS 00820, 01253, 01307 T riad 00321, 00351, 00372 T riasat 00501 T riax 00114, 00115, 00132, 00200, 00396, 00501, 0071[...]

  • Page 196

    32 PRESET CODE Xcom 00123, 00668, 00832 Xcom Multimedia 00668 XMS 01075 Xrypton 00369 Xsat 00123, 00668, 00713, 00847, 01214, 01323 Xtreme 01300 Ye s 00887 Zaunkonig 00692 Zehnder 00114, 00115, 00321, 00331, 00369, 00520, 00742, 00818, 01075, 01191, 01232, 01251, 01334, 01412 Zenith 00856, 01856 Zinwell 01173 Zodiac 00396, 00613 Zwergnase 00243, 00[...]

  • Page 197

    33 PRESET CODE Mission 30157 Mitsubishi 30156 MTC 30420 Musical Fidelity 30393, 30437 Myryad 30157 NAD 30000, 31208 Nagaoka 30018 Naim 30157 Nakamichi 30147 NEC 30043, 30234 Nikko 30164, 30170, 30174 NSM 30157 Oak 30145 Onkyo 30101, 30868, 31685 Optimus 30000, 30032, 30037, 30087, 30145, 30175, 30179, 30194, 30196, 30280, 30305, 30342, 30420, 30426[...]

  • Page 198

    34 PRESET CODE T echnics 20229, 20353 Thorens 20029 Universum 20375, 20439 V ictor 20244, 20273, 20274 Wa rds 20027, 20029 Wharfedale 20439 Y amaha 20094, 20097 PVR 1 ABS 21972 Alienware 21972 CyberPower 21972 Dell 21972 DirecTV 20739 Gateway 21972 Hewlett Packard 21972 Howard Computers 21972 HP 21972 Hughes Network Systems 20739 Humax 20739 Hush 2[...]

  • Page 199

    35 PRESET CODE Broksonic 40695 Bush 40516, 40713, 40884 Denver 41353, 41359 Emerson 41268 Go Vision 41071 Grundig 40695 Hitachi 41247 Jensen 41016 Konka 40719, 40720 Panasonic 41490 Philips 40854, 41260 Prima 41016 RCA 41022 Samsung 40899 Sansui 40695 Sova 41122 Sylvania 40675, 41268 T oshiba 40695 Bush 3 10698, 11037 Denver 3 10587 Sylvania 3 1017[...]

  • Page 200

    40490 DVD preset codes / Codes préréglés DVD 36 PRESET CODE Zenith 00899 DBS/PVR Combination 1 @sat 01300 Atsat 01300 British Sky Broadcasting 01175 Canal Satellite 01339 Comag 01412 Digiturk 01076 DirecTV 00099, 00392, 00639, 01076, 01142, 01377, 01392, 01442, 01443, 01444, 01640 Dish Network System 00775, 01505 Dishpro 00775, 01505 Dream Multi[...]

  • Page 201

    [...]

  • Page 202

    Denon Brand Company , D&M Holdings Inc. Printed in Japan 00D 511 4473 007 TOKYO, JAP AN www .denon.com[...]