D-Link DSL-510 manual

DSL-510 ADSL Router User ’s Guide i DSL-510 ADSL Router User’s Guide (First Edition May 2003)[...]

DSL-510 ADSL Router User ’s Guide i FCC W arning This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC Rules. These limits are d esigned to provide reasonable protection agains t harmful interference in a residential installation. Th is equipment generates, uses a nd can r[...]

DSL-510 ADSL Router User ’s Guide ii T ABLE OF CONTENTS About This User ’ s Guide ......................................................................................... V Guide Overview ................................................................................................................ .............................. v Before Y ou[...]

DSL-510 ADSL Router User ’s Guide iii W indows 2000 fo r DHC P ......................................................................................................... ............ 9 W indows ME for DHC P ........................................................................................................... ............ 12 W indows 98SE for [...]

DSL-510 ADSL Router User ’s Guide iv Log ........................................................................................................................... .............................. 67 T raffic ....................................................................................................................... ....................[...]

DSL-510 ADSL Router User ’s Guide v About This User ’ s Guide This user ’s guide provides instructions on how to in stall the DSL-5 10 ADSL Rout er and use it to connect a computer or Ethernet LAN to the Internet. If you are using a computer with a functioning Ethernet port, you can use the Quick Installation Guide to quickly establish your A[...]

DSL-510 ADSL Router User ’s Guide vi Before Y ou Start Please read and make sure you understa nd all the pr erequisites for proper installati on of your new Router . Have all the necessary information and equipment on hand before beginni ng the installation. Installation Overview The procedure to install the Router can be descr ibed in general te[...]

DSL-510 ADSL Router User ’s Guide vii Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it th rough the Ethernet port on the Router . This connection is an Etherne t connection and theref ore requires that your co mputer be e quipped with an Ethernet port as well. Most notebook computers are now sold with an[...]

DSL-510 ADSL Router User ’s Guide viii Unpacking Open the shipping carton a nd carefully remove all items. In addition to this User's Guide, ascertai n that you have: 1. One DSL-510 ADSL Router 2. One CD-ROM with this User’s Gu ide and the Quick Installation Guide 3. One twisted-pair telephone cable used for ADSL connection 4. One CAT-5 Et[...]

DSL-510 ADSL Router User ’s Guide 1 Chapter 1 - Introduction ADSL modem technology is a relatively new technology and ma y be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its ke y attributes. We also give a g eneral description of the D-Link DSL-510 ADSL Router and its main feature[...]

DSL-510 ADSL Router User ’s Guide 2 Front Panel Place the Router in a location where t he LED indicators can be easily viewed. The LED Indicators read as follows: Pow er Steady green light indicates the unit is pow ered on. Status Blinking green indicates normal operation. Ethernet: Link/ A ct Steady green light indicates a valid Ethernet connect[...]

DSL-510 ADSL Router User ’s Guide 3 Chapter 2 - Hardware Installation In this chapter you w ill learn about t he various connections you w ill need to make in order to use the Router . When selecting the location for the Router, allow ample room to access the conn ections on the rear panel. For convenience, try to plac e the Router ne ar your com[...]

DSL-510 ADSL Router User ’s Guide 4 Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ether net hub or switch with a straight -through cable as shown in the diagram below: Power On Router T o power on the device: 1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Router an[...]

DSL-510 ADSL Router User ’s Guide 5 Chapter 3 - Configuring the Router for the First Time The first time you setup the Router it is rec ommended that you configur e the WAN connection using a single computer making sure that both the computer and the Router are not connected to t he LAN. Once the WAN connection is functioning properly yo u may co[...]

DSL-510 ADSL Router User ’s Guide 6 Windows XP for DHCP 1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network Connections icon. 3. In the LAN or High-Speed Internet wi ndow, right-click on icon corresp onding to your net work interface card (NIC) and select Properties . [...]

DSL-510 ADSL Router User ’s Guide 7 4. In the General tab of the Local A rea Connection Propertie s menu. Highlight Internet Protocol (TCP/IP) under “This connection uses the following items.” by click on it once. Click on the Properties button. 5. Select “ Obtain an IP address automatica lly ” by clicking once in the circle. Click OK to [...]

DSL-510 ADSL Router User ’s Guide 8 6. The Local Area Connection Properties window appears. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-510 ADSL Router User ’s Guide 9 Windows 2000 for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window , right-click the Local Area Connection icon, and then select Properties .[...]

DSL-510 ADSL Router User ’s Guide 10 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) , and then click Properties . 5. Select “ Obtain an IP address automatica lly ” by clicking once in the circle. Click OK to confirm and save your changes, and then close the Control Panel.[...]

DSL-510 ADSL Router User ’s Guide 11 6. The General tab will again appear. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-510 ADSL Router User ’s Guide 12 Windows ME for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-510 ADSL Router User ’s Guide 13 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter. and then click Properties . 4. In the TCP/IP Properties windo ws appear, then choose the IP Address tab, click the Obtain and IP automatically option. Click OK [...]

DSL-510 ADSL Router User ’s Guide 14 5. The Netw ork window again appears, click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-510 ADSL Router User ’s Guide 15 Windows 98SE for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-510 ADSL Router User ’s Guide 16 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter and then click Properties . 4. In the TCP/IP Properties windo ws appear, then choose the IP Address tab, click the Obtain and IP automatically option. Click OK t[...]

DSL-510 ADSL Router User ’s Guide 17 5. The Netw ork window again appears, click OK button. 6. The System Settings Change window appears. You need to restart your co mputer for the cha nges to go into effect. Click Yes .[...]

DSL-510 ADSL Router User ’s Guide 18 Access the Web Configuration Manager Once the computer has IP settings that allow it to access the web-based conf iguration software, you can change the settings to enable the Router to connect to the Internet. If the browser software on the computer you are using is conf igured t o use a proxy server for Inte[...]

DSL-510 ADSL Router User ’s Guide 19 Using the Configuration Wizard 1. Once you have logged in, the Home screen w ill appear. Click Run Wizard button. 2. The Setup Wizard screen will appear. Follow the Wizard step by step to quickly co nfigure the DSL-510. Click N ext button. Check your IP supplier information. If you are unsure of which setting [...]

DSL-510 ADSL Router User ’s Guide 20 3. Set up your new password. It is recommended that you change the 510admin password for se curity purposes. Enter in your new password. Enter it in a second time for verification. Click the Next button. 4. There will be four options to select from. Please se lect the appropriate option t hat is used by your I[...]

DSL-510 ADSL Router User ’s Guide 21 Dynamic IP A ddress If your selected Dynamic IP A ddress , you will see the follo wing page. You will need to enter in VPI , VCI and select your connection type. The information provided to you by your ISP. Click Next button. Static IP A ddress If your selected Static IP A ddress , you will see the follo wing [...]

DSL-510 ADSL Router User ’s Guide 22 PPPoE/PPPoA If your selected PPPoE/PPPoA , y ou will see the following pag e. Enter in the Use Name , Passw ord , VPI , VCI and select your connection type provided to y ou by y our ISP. Click Next button. Bridge Mode If your selected Bridge Mode , y ou will see the follo wing page. You will need to enter in V[...]

DSL-510 ADSL Router User ’s Guide 23 5. At this point, the Setup Wizard has completed. Click Restart to save the se ttings and reboot the DSL-510. 6. The DSL-510 will save the changes and reboot. Click Close button to close out the Setup Wizard screen. Y ou setup of the DSL-510 is now complete. Y ou should be able to access the Internet.[...]

DSL-510 ADSL Router User ’s Guide 24 Configuring IP When Setting Your Computer If you connection type as Dynamic IP Address, Static IP A ddress and PPPoE/PPPoA , Don’t care configuring IP setting on you Computer. Your computer is used the ADSL Router DHCP server. If you connection type as Bridge Mode , Please follow ing settings steps under lis[...]

DSL-510 ADSL Router User ’s Guide 25 3. In the LAN or High-Speed Internet wi ndow, right-click on icon corresp onding to your net work interface card (NIC) and select Properties . (This icon may be labeled Local Area Connection ) 4. In the General tab of the Local A rea Connection Propertie s menu. Highlight Internet Protocol (TCP/IP) under “Th[...]

DSL-510 ADSL Router User ’s Guide 26 5. The Internet Protocol (TCP/IP) Propert ies window appears. Under the General tab, select Use the following IP address: , enter the IP addr ess , Subnet Mask , and Default Gateway given to you by your ISP or ADSL service provider, then select Use the follow ing DNS server addresses: , enter the DNS setting s[...]

DSL-510 ADSL Router User ’s Guide 27 Windows 2000 IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window , right-click the Local Area Connection icon, and then selec[...]

DSL-510 ADSL Router User ’s Guide 28 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) , and then click Properties . 5. The Internet Protocol (TCP/IP) window appears. Under the General tab, select Use t he following IP address . Enter the IP address , Subnet Mask , and Default Gateway given to you by yo ur I[...]

DSL-510 ADSL Router User ’s Guide 29 6. The General tab will again appear. Click OK button. 7. The Local Netw ork window appears. Y ou need to restart your comput er for the changes to go into ef fect. Click Ye s .[...]

DSL-510 ADSL Router User ’s Guide 30 Windows ME IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-510 ADSL Router User ’s Guide 31 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter. and then click Properties . 4. The TCP/IP Properties window appears. Select the IP Address tab and then select the Select an IP address option. Enter the IP Add[...]

DSL-510 ADSL Router User ’s Guide 32 5. Select Gateway tab and enter the IP settings in the Ne w ga t e way field. Click Ad d . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.[...]

DSL-510 ADSL Router User ’s Guide 33 9. Enter the DNS settings in the DNS Server Order field and click Add . If you have more than one DNS IP addr ess, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .[...]

DSL-510 ADSL Router User ’s Guide 34 11. The Netw ork window again appears, click OK button. 14. The System Settings Change window appears. You need to restart your co mputer for the changes to go into effect. Click Yes .[...]

DSL-510 ADSL Router User ’s Guide 35 Windows 98SE IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-510 ADSL Router User ’s Guide 36 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter and then click Properties . 4. The TCP/IP Properties window appears. Select the IP Address tab and then select the Select an IP address option. Enter the IP Addr[...]

DSL-510 ADSL Router User ’s Guide 37 5. Select Gateway tab and enter the IP settings in the Ne w ga t e way field. Click Ad d . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.[...]

DSL-510 ADSL Router User ’s Guide 38 9. Enter the DNS settings in the DNS Server Order field and click Add . If you have more than one DNS IP addr ess, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .[...]

DSL-510 ADSL Router User ’s Guide 39 11. The Netw ork window again appears, click OK button. 12. The System Settings Change window appears. You need to restart your co mputer for the changes to go into effect. Click Yes .[...]

DSL-510 ADSL Router User ’s Guide 40 Chapter 4 – Web-based Configuration This chapter describes ho w to use the embedded web-based management softwa re to configure the Router for additional PVC connection profiles, to change the LAN IP address, to change the global WAN IP address a nd to perform other management functions. Home Wizard The Setu[...]

DSL-510 ADSL Router User ’s Guide 41 WAN WAN is short for Wide Area Net work. The WAN settings can be re ferred to as the Public settings . All IP information in the WAN settings are public IP addresses which are accessible on the Internet. The WAN settings consist of f our options: Dynamic IP Address, Static IP Address, PPPoE/PPPoA and Bridge Mo[...]

DSL-510 ADSL Router User ’s Guide 42 Home ＞ WA N ＞ Static IP A ddress Choose Static IP Address if all W AN IP information is provided to you by your ISP. Yo u will need to enter in the VPI, VCI, IP Address, Subnet Mask, ISP Gateway Address, DNS Address and select connection t ype provided to you by your ISP. Each IP address entered in the fie[...]

DSL-510 ADSL Router User ’s Guide 43 Home ＞ WA N ＞ PPPoE/PPPoA Choose PPPoE/PPPoA if you’re ISP uses PPPoE/PPPoA connec tion. Your ISP will provide you with a username, password, VPI, VCI and select connection ty pe. This option is typically used for DSL service. User Name: Your PPPoE/PPPoA user name provided by y our ISP Passw ord: Your PP[...]

DSL-510 ADSL Router User ’s Guide 44[...]

DSL-510 ADSL Router User ’s Guide 45 Home ＞ WA N ＞ Bridge Mode Choose Bridge Mode if all W AN IP information is provided to you by your ISP. Yo u will need to enter in the VPI, VCI and select connection type provided to you by your ISP. VPI: If instructed to change this, type in t he VPI value for the initial connection. VCI: If instructed to[...]

DSL-510 ADSL Router User ’s Guide 46 LAN LAN is short for Local Area Network. This is consi dered your internal n etwork. These are the IP settings of the LAN interface for the DSL-510. These settings may be referred to as Private settings. You ma y change the LAN IP address if needed. The LAN IP address is private to your in ternal netw ork and [...]

DSL-510 ADSL Router User ’s Guide 47 DHCP DHCP stands for Dynamic Host Control Protocol. T he DS L-510 has a built-i n DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/priv ate network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Autom[...]

DSL-510 ADSL Router User ’s Guide 48 DNS The DNS Configuration page allows the user to set the configuration of DNS proxy . DNS proxy selection: (1) Disable DNS Proxy: The LAN port does not proc ess the DNS query message. (2) Use A uto Discovered DNS Servers Only : The DNS proxy w ill store the DNS server IP addresse s obtained from DHCP client o[...]

DSL-510 ADSL Router User ’s Guide 49 Advanced Virtual Server The DSL-510 can be config ured as a virtual se rver so that remote users accessing Web or FT P services via the public IP address can be automatically redirected to local servers in the LAN netw ork. The DSL-510 firewall feature filt ers out unrecognized packets to protect your LAN net [...]

DSL-510 ADSL Router User ’s Guide 50 Filters Filters are used to deny LAN computers from accessing the Inte rnet. The Router can be setup to deny internal comput ers by their IP or MAC addresses. The DSL-510 can also block users from accessing restricted w eb sites. Adv anced ＞ Filters ＞ Outbound Filters-Outbound: Use IP Outbound Filters to d[...]

DSL-510 ADSL Router User ’s Guide 51 Adv anced ＞ Filters ＞ Inbound Filters-Inboun d: Use IP Inbound Filters to deny WAN IP addresses fr om accessing the i nternal network. You can den y specific port numbers or all ports for the specific IP address. Source IP: IP address criteria for the source computer(s) from w hich the packet originates. D[...]

DSL-510 ADSL Router User ’s Guide 52 Schedule This is the schedule of time when the IP Filter will be enabled. Schedule Name: defines the name of this time schedule . Schedule: drop dow n menus help you in conf iguring the start and end days of t he time interval in one option . if add new time schedule, it w ill increase V irtual Server Configur[...]

DSL-510 ADSL Router User ’s Guide 53 Routing The Route Table page dis plays routing table and allows the user to manu ally enter the routing entry. The routin g table will display the routing status of Destination, Netmask, Gate way and Interf ace. The interface lo0 me ans the loop back interface; and ppp1 means the PPP interface. The Gateway is [...]

DSL-510 ADSL Router User ’s Guide 54 DMZ If you have a client PC that cannot run In ternet appl ications properly from behind the DSL-510, then you c an set the client up to unrestricted Internet acc ess. It allows a computer to be exposed to the Internet. T his feature is useful for gaming purposes. Enter the IP address of the interna l computer[...]

DSL-510 ADSL Router User ’s Guide 55 Firewall Firewall Rules is an advance feature used to den y or allow tra ffic from passing through the DSL-510. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the Router. DoS Protection: Click the Enable radio button to use the follo wing den ial of serv[...]

DSL-510 ADSL Router User ’s Guide 56 RIP The RIP Configuration page allows the user to set the configuration for th e system wide configuration of RIP. The actual RIP configuration is in t he Advanced Configuration. Adv anced ＞ RIP ＞ Basic Configuration Supplier Interval: This field allows the user to enter the Supplier Inte rval timer in sec[...]

DSL-510 ADSL Router User ’s Guide 57 Adv anced ＞ RIP ＞ Adv anced Configuration Interface: This field allo ws the user to choose the Interface ( PVCs, PPP Sessions and LAN), for the RIP to be configur ed. A ction: This field allows the user to Enable (Yes) or Disable (No) the specifi ed interface for RIP. Send: This field allows the user to se[...]

DSL-510 ADSL Router User ’s Guide 58 PPP PPP is configured as a group of software settings as sociated with the ADSL port. Although the device has only one physical ADSL port, the Router can be defined with more than one group of PPP settings. Each group of settings is called a PPP interface and is given a name, such as ppp-0, ppp-1 , etc. Adv an[...]

DSL-510 ADSL Router User ’s Guide 59 Adv anced ＞ PPP ＞ PPP Account Configuration User Name: The name you use to log in to your ISP each time this PPP connec tion is established. Passw ord: The password you use to log in to your I SP each time this PPP c onnection is established. ADSL The ADSL Configuration page allows the user to set the conf[...]

DSL-510 ADSL Router User ’s Guide 60 SNMP SNMP (Simple Network Management Protocol) is a widely us ed network monitoring a nd control protocol that reports activity on each net work device to the adm inistrator of the network. SNMP can be us ed to monitor traffic and statistics of the DSL-510.The DSL-510 supports SNMP v1, v2. System Name: The nam[...]

DSL-510 ADSL Router User ’s Guide 61 Tools Admin At this page, the DSL-510 administrator can chan ge the system password. T he default value is 510adm in , which has read/write access w hile. New Password : Type in the new passw ord. Confirm Passw ord: Type in the new passw ord a second time for confirmation. Time The system time is the time used[...]

DSL-510 ADSL Router User ’s Guide 62 System The current system settings can be saved as a file onto the local hard drive. The sa ved file or any other saved setting file can be loaded back on the A DSL Router. To reload a system se ttings file , click on Browse to browse the local hard drive and locate the system file to be used. You may also res[...]

DSL-510 ADSL Router User ’s Guide 63 In order to keep pace with changes in ADSL standar ds and technology the DSL-51 0 allows you to easily update the embedded firmware. Y ou may obtain th e latest version of the DSL-510 firmware by logg ing onto the D-Link web site at D-Link T echnical support website of your country . The Updat e Firmware windo[...]

DSL-510 ADSL Router User ’s Guide 64 3. Choice the file (FIRMWARE.DLF). 4. Click Apply button.[...]

DSL-510 ADSL Router User ’s Guide 65 5. Power Off the ADSL Router about 30 seconds, then Pow er On. Misc. These are additional tools and feat ures of the ADSL Router. Ping Test: This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packets and listens for replies from the specific host. Connections IG[...]

DSL-510 ADSL Router User ’s Guide 66 Diagnostic This useful diagnostic utility can be use d to check if a computer is on the Inter net. It sends ping packets and listens for replies from the specific host.[...]

DSL-510 ADSL Router User ’s Guide 67 Status Device Info This page displays the current information for the ADSL Router. It w ill display the WAN, LAN, information. This page allows you to observe the DSL-510 w orking status: Log The ADSL Router keeps a running log of events and activities occurrin g on the ADSL Router. If the dev ice is rebooted,[...]

DSL-510 ADSL Router User ’s Guide 68 Traffic The ADSL Router keeps a statistic of traffic that passes throu gh it. You are able to view the amount of pack ets that passes through the ADSL Router on both the WAN port and the LAN port. The traffic counter will reset if the device is rebooted.[...]

DSL-510 ADSL Router User ’s Guide 69 ATM The ATM Status page shows all the st atistics information of ATM cells. Tx Bytes: Total Good Bytes TX’s Rx Bytes: Total Good Bytes Received Tx Cells: Total Good Cells TX’s Rx Cells: Total Good Cells Received Rx HEC Errors: Number of cells received with failed checked Tx Mgmt Cell: Number of mgmt cells [...]

DSL-510 ADSL Router User ’s Guide 70 TCP The TCP Status page shows the st atistics for all TCP connections. Total Packets Sent; Data Packets Sent; Data B ytes Sent; Total Packets Received; Packets Received in-sequence; Bytes Received in-sequenc e; Out of Order Packets; Out of Or der By tes; Packets Disgarded for bad checksum; Packets Disgarded fo[...]

DSL-510 ADSL Router User ’s Guide 71 ADSL Show time Firmware Version: This field displays the D-Link ADSL data pump firmware version number. A DSL Line Status: This field displays the ADSL connection process and status. A DSL Modulation: This field displays the ADSL modul ation status for G.dmt or T1.413. A DSL A nnex Mode: This field displays th[...]

DSL-510 ADSL Router User ’s Guide 72 Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) Protocol: RFC 1483 Multiprotocol Encapsulation over A T M Adaptation Layer 5 Data T ransfer Rate: G.dmt full rate downstream: up to 8Mbps G.dmt full rate upstream: up to 1 Mbps G.lite ADSL down[...]

DSL-510 ADSL Router User ’s Guide 73 Appendix B – Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These d evices are commonly referr ed to as microfilters or sometimes calle d (inaccurately) line splitters. They are easy to ins[...]

DSL-510 ADSL Router User ’s Guide 74 Line Splitter If you are instructed to use a “line splitter”, you must inst all the device between the Ro ut er and the phone jack. Use standard telephone cabl e with standard RJ-11 connectors. T he sp litter has three RJ-11 ports used to connect to the wall jack, the Router and if desired, a telephone or [...]