Cisco Systems PRP-2= manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Cisco Systems PRP-2=, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Cisco Systems PRP-2= one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Cisco Systems PRP-2=. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Cisco Systems PRP-2= should contain:
- informations concerning technical data of Cisco Systems PRP-2=
- name of the manufacturer and a year of construction of the Cisco Systems PRP-2= item
- rules of operation, control and maintenance of the Cisco Systems PRP-2= item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Cisco Systems PRP-2= alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Cisco Systems PRP-2=, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Cisco Systems service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Cisco Systems PRP-2=.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Cisco Systems PRP-2= item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Corporate Headquarters: © 2008 Cisco Systems, Inc. All rights reserved. Cisco Systems, I nc., 170 West Tas man Drive, San Jose, C A 95134-1706 USA Performance Route Processor Installation and Configuration Guide Product Number: PRP-1=, PRP-1/R=, PRP-2=, PRP-2/R= This hardware installati on and conf iguration note de scribes the Performance Route P[...]

  • Page 2

    Important Informatio n 2 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 • Regulator y , Compliance, and Safety Info rmation, page 79 • Obtaining Documen tation, page 84 • Documentation Feedback , page 85 • Cisco Product Security Ov erview , page 85 • Product Alerts and Field Notices, page 87 • Obtaining [...]

  • Page 3

    3 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Important Information PRP Redundancy When two PRPs are installed in a Cisc o 12000 Series Router, one PRP is the activ e PRP and the other is a backup, or standby , PRP . If the activ e PRP fails or is remov ed from the system, the standby PRP detects th e failure and [...]

  • Page 4

    Important Informatio n 4 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note Output from the show vers ion co mmand on a PRP-2 c ard running on software releases prior to 12.0(30) S may display some incorrect information. This is only a display issue and it occurs because th e software does not recognize some of the[...]

  • Page 5

    5 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview Related Documentation For additi onal information on t he PRP , refer to these publications: • P erformance Route Pr ocessor Softwar e Configur ation in Cisco 12000 Series Internet Routers • Route Pr ocessor Redundancy Plus for the Cisco 12000 Seri[...]

  • Page 6

    Product Overview 6 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figure 2 sho ws the front panel vie w of the PRP-2. Figure 2 PRP -2, Front P anel View The PRP-2 is av ailable as Product Numb er PRP- 2 or PRP-2=, which includes one PRP with 1 G of synchrono us dynamic random-access memory (SDRAM) and one 64-MB adva[...]

  • Page 7

    7 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview In addition to th e functionality listed for t he PRP-1, the PRP-2 pro vides the follo wing additional functions: • One IEEE 802.3 10/100/100 0-megabits-per -second (Mbps) Ethernet port • T wo buildin g integrated timin g system (BITS) ports for co[...]

  • Page 8

    Product Overview 8 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 The PRP-2 contains the follo wing additional components: • SDRAM—Up to 4 GB of Ci sco-approv ed synchronous dynamic random-access memory (SDRAM) on tw o dual in-line memory modules (DIMMs). 1 GB of SDRAM is the def ault shipping configurat ion. SD[...]

  • Page 9

    9 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview The PRP-2 provides the follo wi ng additional Flash memory: • Compact Flash (CF) disk —Optional 1 GB CF can be used for l arge IOS images. Storing the Cisco IOS images in Flash memory enables you to do wnload and boot from upgraded Cisco IOS softwa[...]

  • Page 10

    Product Overview 10 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figur e 3 PRP -1 (Horiz ontal Orientati on) 1 Backplane connector 6 Ethernet ports 2 Flash SIMM (Socket number P3) 7 Auxiliary port 3 SDRAM DIMMs Bank 1 - Socket number U15 Bank 2 - Socket number U18 8 Console port 4 Ejector le ver 9 Handle 5 Flash d[...]

  • Page 11

    11 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview Figur e 4 PRP -2 (Horiz ontal Orientati on) 1 Compact Flash disk (option al) 8 Console port 2 Flash SIMM (Socket number P3) 9 Gigabit Et hernet port 3 Ejector le ver 10 Handle 4 Flash disk slots (cov ered) 11 Display LEDs 5 Ethernet ports 12 SDRAM DIM[...]

  • Page 12

    Product Overview 12 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note If a single DIMM module is installed, it must be placed in bank 1 (U15). T able 1 PRP Memory Components T ype Size Quantity Description Location SDRAM 1 1. Default SDRAM configuration is 512 MB for PRP-1 and 1-GB for PRP-2. Bank 1 (U15) must be [...]

  • Page 13

    13 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview SDRAM SDRAM stores routing tabl es, protocol s, an d network accounting applicatio ns, and runs the Cisco IOS software. The de f ault PRP-1 configuration includes 512 MB of error checking and correctio n (E CC) SDRAM. DIMM upgrades of 512 MB and 1 GB [...]

  • Page 14

    Product Overview 14 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Flash Memory Flash memory allo ws you to remotely load an d store multiple Ci sco IOS software and microcode images. Y ou can do wnload a ne w image ov er the network or from a local server and then add the ne w image to Flash memory or replace the e[...]

  • Page 15

    15 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview The PRP-2 ha s the following LED indicato rs: • T wo Flash disk activity LEDs, one for each Flash disk slot (labeled SLO T -0 and SLO T -1)—Indica te when the Flash disk slot is acce ssed. • T wo Ethernet port LEDs used in conjun ction w ith eac[...]

  • Page 16

    Product Overview 16 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Soft Reset Switch A soft reset switch pro vides a reset to the processo r software on t he PRP . Y ou access the soft reset switch through a sm all opening in the PRP faceplate. T o depress the switch, insert a paper clip or a similar object into the[...]

  • Page 17

    17 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Overview Asynchronous Serial Ports The PRP has two asynchronous ser i al ports, the console and auxili ary ports. These allo w you to connect ex ternal serial de vices to monitor and manage the system. Both ports use RJ-45 receptacles. The console port provide[...]

  • Page 18

    Preparing for Installation 18 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Compact Flash Disk The PRP-2 optionally incl udes a 1-GB compact flash disk that is in stalled on the PRP-2 board. Note Non-Cisco compact flash disks are not sup ported. Preparing for Installation Installation preparation i s presented in t[...]

  • Page 19

    19 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Preparing for Installation • Cisco equipment operates safely when it is used in accordance with its specificat ions and product usage instructio ns. • If you plan to replace a PRP , back up your current conf iguration file to a remote server or to Flash memory bef[...]

  • Page 20

    Removing and Installing a PRP 20 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Required Tools and Equipment Y ou need the follo wing tools and parts to remov e and install a PRP: • Flat-blade or Phillips scre wdriv er • ESD-pre venti ve wrist strap and instructions • Antistatic mat, foam pad, or bag fo r the [...]

  • Page 21

    21 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Removing and In stalling a PRP Note The procedures in the follo wing sections use illustrations of a Cisco 12404 Internet Router to sup port the descriptio ns of installing and rem oving a route processor card. The card cage s of Cisco 1 2000 Series Routers dif fer in[...]

  • Page 22

    Removing and Installing a PRP 22 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figure 5 illustr ates the PRP installed in a chassis. Figur e 5 Installed PRP (Cisco 12404 Shown) 1 PRP 2 Ejector Le vers CONSOLIDATED SWITCH F ABRIC C R IT IC A L M A J O R M IN O R M B U S F A IL E N A B L E A L A R M F A B R I C 1 0 2[...]

  • Page 23

    23 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Removing and In stalling a PRP Figure 6 sho ws the ejector levers in detail. Figur e 6 Ejector Lever Detail (Cisco 12404 shown) T o remove a PRP , follo w these steps: Step 1 If you are replacing the PRP in a system with only one PRP , copy the currently running conf [...]

  • Page 24

    Removing and Installing a PRP 24 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Step 6 Place your thumbs on t he ends of each of the ejector le vers and simultan eously pull them both aw ay from the PRP faceplate (in the direction sho w n in Figure 6 a) to release the PRP from the upper card ca ge slot and to dislod[...]

  • Page 25

    25 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Removing and In stalling a PRP Caution A void touching the PRP printed circuit boa rd, components, or an y edge connector pins. Step 4 Place the bus-connector edge of the PRP in the appropri ate slot and align the notches along the edge of the carr ier with the groo v[...]

  • Page 26

    Checking the Installation 26 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Checking the Installation This section assists you in confirming that the PRP is installed successfully and includes th e following sections: • PRP Boot Process, page 26 • Starting the System and O bserving Initial Condition s, page 27 ?[...]

  • Page 27

    27 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Checking the Installation Starting the System and Observing Initial Conditions This section describes the in itial syst em startup processe s and proced ures. T o start your system, follow these steps: Step 1 T urn on each installed power s upply b y turning its syste[...]

  • Page 28

    Checking the Installation 28 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figur e 7 PRP Alphanumer ic Di splay LEDs (V ertical View) 1 Upper (or left if horizontal ) LED Display 2 Lo wer (or right if horizontal) LED Display T able 2 PRP Alph anumer ic Display LED Seq uences LED Display Description MR OM nnnn PRP m[...]

  • Page 29

    29 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Checking the Installation Step 4 During the line card boot pro cess, which occurs immediately after the PRP boots, observ e the alphanumeric display LEDs on each line card. The system attempts to boot identical line cards in parallel. Furthermore, the system boots lin[...]

  • Page 30

    Checking the Installation 30 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 • b flash disk0: file n am e —B oots the file filename from the Flash disk in Flash card slot 0 • b flash disk1: file n am e —B oots the file filename from the Flash disk in Flash card slot 1 Caution The b flash disk0: and b flash di[...]

  • Page 31

    31 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Checking the Installation The interface-specif ic LEDs on line cards might not go on until after you configure the line card interfaces. T o veri fy correct operation of each interface, complete the fi rst-time setup procedures an d conf iguration, then refer to the L[...]

  • Page 32

    Upgrading to the PRP 32 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figure 9 PRP -2 LEDs (P a rtial Fr ont Panel V iew) The PRP-2 ha s the following LED indicato rs: • T wo Flash disk activity LEDs, one for each Flash disk slot (labeled SLO T -0 and SLO T -1)—Identify w hich of th e Flash disk slots is access[...]

  • Page 33

    33 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Upgrading to the PRP Without Rebooting the Router T o upgrade to the PRP from the GRP without interruption o f service, you must ha ve support for Hi gh A vailabilit y in your router . This mean s that two GRPs must be installed in the router and [...]

  • Page 34

    Upgrading to the PRP 34 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 BOOTLDR = Configuration register = 0x2102 Peer Processor Information : ---------------------------- Standby Location = slot 4 Current Software state = STANDBY HOT Uptime in current state = 2 hours, 13 minutes Image Version = Cisco Internetwork Op[...]

  • Page 35

    35 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Step 4 If the Cisco IOS versi on is not the same as the one runni ng on the GRPs, delete the image from the disk using th e delete disk1: file na me command (or the delete stby-disk1: fil en am e command if the Flash disk is i n the standby RP). I[...]

  • Page 36

    Upgrading to the PRP 36 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note The PRP and GRP must both be running the same Ci sco IOS version; otherwise, the redundanc y will rev ert to RPR mode and there may be traf fic disru ption. Step 12 Remove the activ e GRP . Because the router is configured for High A vailabi[...]

  • Page 37

    37 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Note The PRP-2 does not require an RP R O M monitor upgrade before Cisco IOS Software Release 12.0(30)S. If you attempt this upgrade on a PRP-2 using a prior software release, you will rece iv e the following error message: Error: Unknown Fl ash D[...]

  • Page 38

    Upgrading to the PRP 38 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Step 6 Upgrade the Mb us-agent-rom using the upgrade mb us-agent-rom all command. Normal forwarding operati on of the line cards will not be affected durin g the upgrade. The line cards do no t need to be reloaded. If any error messages are displ[...]

  • Page 39

    39 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Step 3 As soon as the “Press RETURN to get st arte d!” message appears on the console, enter enable mode and use the upgrade rom-monitor slot rp-s lot command. If the routine f inds that an upgrade is necessary , the new code will b egin t o b[...]

  • Page 40

    Upgrading to the PRP 40 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Upgrading to the PRP With Rebooting the Router If for any reason y ou cannot use High A vail ability , you should use the follo wing procedure to upgrade from a GRP to a PRP . Step 1 Remov e the Flash disk from the PRP card and install it into sl[...]

  • Page 41

    41 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Step 7 Make a note of the image name that is being used on the PRP . Y ou can use the command dir disk1: . Step 8 Set the boot system command to boot the ne w IOS image. Note that the reference will be against d isk0:. This is deliberate. Use the [...]

  • Page 42

    Upgrading to the PRP 42 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Step 18 Upgrade the Mb us-agent-rom by us ing the command upgrade mbus-agent-rom all . Line cards do no t need to be re loaded. If any error m essages are display ed (see follo wing example), repeat this step before contactin g Cisco T A C. MBus [...]

  • Page 43

    43 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Upgrading to the PRP Step 22 If the routine f inds that an upgrade is ne cessary , the new code will be loaded. The router will reload once th e rom-monitor upgrad e has completed, without sa ving the running configuration. If the rom-monitor upgrade w as not requir e[...]

  • Page 44

    Configuring Interfaces on the PRP 44 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note Field diagnost ics cannot be run on th e PRP-2 u nless you are using software release 12.0(30)S or hi gher . Note The sh ow vers ion command may display incorrect in formation for the PRP-2 card in software releases prior to 12.[...]

  • Page 45

    45 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Configuring Interf aces on the PRP Note T o comply with T elcordia GR-1089 NEBS standard for electromagnetic compatibility and saf e ty , connect all console, auxiliary , Ethernet, and BITS (PRP2) interfaces only to intrabuilding or nonexposed wiring or cabling. The i[...]

  • Page 46

    Configuring Interfaces on the PRP 46 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Depending on your RJ-45 cabl ing requirement s, use the cable pi nouts shown in Figure 11 or Figu re 12 . Figur e 1 1 Straight- Throu gh Cable Pino ut (Con necting MDI Ether net P ort to MDI- X Wir ing) Figur e 12 Cr ossov er Cable P[...]

  • Page 47

    47 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Configuring Interf aces on the PRP Ta b l e 4 lists the cabling speci fications fo r 100-Mbps transmission o ver unshielded twisted-pair (UTP) cables. Note The transmission speed of the Ethernet por ts is auto-sensing b y default an d is user configurable. Ta b l e 5 [...]

  • Page 48

    Configuring Interfaces on the PRP 48 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Ethernet Interface Cable Connection Procedure The RJ-45 receptacle s on the PRP-1 provide two physical con nection options for Ethernet interfaces and three physical co nnections on the PRP-2. RJ-45 cables are not av ailable from Cis[...]

  • Page 49

    49 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Configuring Interf aces on the PRP Figur e 13 Using the Ether net P ort on the PRP Configuring the Et hernet Interfaces The IEEE 802.3 Ethernet interfaces, located on the PRP , allow connections to external Ethernet net works and are capable of data tran smission rate[...]

  • Page 50

    Configuring Interfaces on the PRP 50 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Using Configuration Mode to Con figure an Ethernet Interface T o perform a basic configurati on of an Ethernet int erface in conf iguration mode, follo w these steps: Step 1 At the pri vileged-le vel prompt, enter conf iguration mode[...]

  • Page 51

    51 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Configuring Interf aces on the PRP Using the Setup Command Facility to Configu re an Ethernet Interface In the follo wing example of an Et hernet confi guration using the setup command facili ty , the Ethernet interf ace is config ured using IP and Connect ionless Net[...]

  • Page 52

    Configuring Interfaces on the PRP 52 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figure 14 Console and A ux iliar y P ort Connections Note The console and auxiliary ports are both asynchronous serial ports; an y de vices connected to these ports must be capab le of asynchronous transmission. (Asynchronous is the [...]

  • Page 53

    53 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Configuring Interf aces on the PRP Configuring the Auxiliary Interface The auxiliary port on the PRP is a DTE, RJ-45 plug for connecting a modem or other DCE de vice (such as a CSU/DSU or another router) to the router . The port is labeled Aux , as shown in Figur e 14[...]

  • Page 54

    Additional Configuration and Maintenance Tasks 54 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Additional Configuration and Maintenance Tasks This section contains information on the follo wing additional conf iguration, maintenance, and upgrade task s: • Understanding the Softw are Configuration Re gister , pag[...]

  • Page 55

    55 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks – Boot image stored within t he operating en vironment, which you access by using an appr opriate form of the boot co mmand entered at the ROM monitor prompt ( rommon> ) • Defin e a default boot f ilename. • En[...]

  • Page 56

    Additional Configuration and Maintenance Tasks 56 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Ta b l e 8 defines the b its in the software con figuration register . Note V alid software confi guration re gister v alues may be combinations of settings, rather than the indi vidual settings listed in Ta b l e 8 . Fo[...]

  • Page 57

    57 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Boot Field Settings Bits 00 to 03 o f the software conf iguration register are referred to as t he boot f ield, which def ines a source for booting the default Cisco IOS softw are image required to run the rout er . The[...]

  • Page 58

    Additional Configuration and Maintenance Tasks 58 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note Cisco 12000 Series Interne t Routers are typically deli ve red from the factory with a mini-Cisco IOS soft ware boot image i n the boot flash and a flash card containing a suitable workin g Cisco IOS im age. If yo u[...]

  • Page 59

    59 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Bits in the Software Configuration Register As described in the “Boot Fiel d Settings” section on page 57 , the boot f ield setting determines the source of the Ci sco IOS software image that is used to boot the rou[...]

  • Page 60

    Additional Configuration and Maintenance Tasks 60 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 mode. Reg ardless of the setting of the Break enable b it in the software confi guration regi ster , pressing the Break ke y during approximately th e first 5 seconds of boot ing causes a return to the R OM monitor . Bit[...]

  • Page 61

    61 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Bit 13 of the software conf iguration register determines the respon se of the system to a bootload f a ilure. Setting bi t 13 causes the system to l oad Cisco IOS software from Flash memory after f ive unsuccessful att[...]

  • Page 62

    Additional Configuration and Maintenance Tasks 62 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Removing and Installing a Flash Disk in the PRP The PRP has two Flash disk slots into which you can inst all A T A Flash disks, linear Flash memory cards, or a co mbination of the t wo. Slot position s are labeled slot 0[...]

  • Page 63

    63 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Figur e 15 Flash Disk Slot Cov er Remov al and Installation Figur e 16 Installing and Removing a Flash Disk CONSOLIDATED SWITCH F ABRIC C R IT IC A L M A J O R M IN O R M B U S F A IL E N A B L E A L A R M F A B R I C 1[...]

  • Page 64

    Additional Configuration and Maintenance Tasks 64 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Installing a Flash Disk T o install a Flash disk, follow these steps: Step 1 Re move th e F la s h d is k s lo t c over by loosening the captiv e scre w shown in Figure 15 . Step 2 Facing the PRP f ront panel, hold the F[...]

  • Page 65

    65 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Note This publication d oes not cov er all Cisco IOS Flash card command s. For compl ete Flash card comm and descriptio ns and co nfiguration i nformation, refer to the Cisco IOS Conf igurati on Fundamentals Command Ref[...]

  • Page 66

    Additional Configuration and Maintenance Tasks 66 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Removing and Installing a Compact Flash Disk Note Y ou must remove th e PRP-2 before you can remov e or install a compact flash disk. The compact flash disk is only supported on the PRP-2. T o remove a compact flash disk[...]

  • Page 67

    67 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks T o install a CF into the PRP-2 board, follo w these steps: Step 1 Loosen the sc re w fasteni ng the retaining brack et for the CF . Step 2 Lift the end of the retaining brack et out of the hole that holds it in pl ace [...]

  • Page 68

    Additional Configuration and Maintenance Tasks 68 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Figur e 1 8 Installing the Hard Disk Dr ive Step 2 T ighten all four of the scre ws on the HDD into the P RP-2 board. 1 Scre w receptor on PRP-2 board 2 Guide pin on PRP-2 board 3 Scre w to fasten HDD to PRP-2 bo ard 101[...]

  • Page 69

    69 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Recovering a Lost Password This section provides in formation on how to recover a lost password. The following ov ervi e w describes th is process: 1. Use the sh ow ver sio n command to note the e xisting softw are conf[...]

  • Page 70

    Additional Configuration and Maintenance Tasks 70 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Step 5 W ithin 5 seconds of turning on the router , press the Break ke y . This action causes the terminal to display th e bootstrap program prompt as follo ws: Rommon 1> Step 6 Set the conf iguration register to igno[...]

  • Page 71

    71 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Step 9 Press Return . After some interface infor mation displays, the pro mpt appears as follo ws: Router> Step 10 Enter the enable command to enter enabled mode. The prompt changes to the foll owing : Router# Step 1[...]

  • Page 72

    Additional Configuration and Maintenance Tasks 72 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Upgrading PRP Memory This section pro vides the procedure for increasing the amount of SDRAM on a PRP by replacing up t o two SDRAM DIM Ms that reside on the PRP . The SDRAM DIMM sockets are U15 (bank 1) and U18 (bank 2)[...]

  • Page 73

    73 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Figure 1 9 Locations of PRP Compone nts and Memory 1 Backplane connector 6 Ethernet ports 2 Flash SIMM (Socket number P3) 7 A uxiliary port 3 SDRAM DIMMs Bank 1 - Socket number U15 Bank 2 - Socket number U18 8 Console p[...]

  • Page 74

    Additional Configuration and Maintenance Tasks 74 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Before proceeding, ensure that you ha ve the prop er tools and ESD-pre vention equipment a v ailable. T o upgrade SDRAM, you will install DIMMs in one o r two banks (U15 an d U18). Ta b l e 1 5 and Ta b l e 1 6 list the [...]

  • Page 75

    75 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Note If your system includes redundant PRPs, bo th PRPs should ha ve the same memory size. Redundanc y is not supported wh en using a GRP and a PRP in the same chassis. Cisco strongly recommends that yo u av oid configu[...]

  • Page 76

    Additional Configuration and Maintenance Tasks 76 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Note Some line card s use DIMM soc kets eq ui pped with dual release lev ers, as sho wn in Figure 20 ; other line c ards use DIMM sock ets equipped with a single release lev er, as sho wn in Figure 21 . Both DIMM soc ket[...]

  • Page 77

    77 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Additional Configura tion and Main tenance Tasks Caution Handle the edges of the DIMM onl y . Do not touch th e integrated ci rcuit de vices on the DIMM, the metal traces, or fingers, along the edge of the DIMM, or the pins in the DIMM socket. Step 5 As one end of the[...]

  • Page 78

    Additional Configuration and Maintenance Tasks 78 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Step 5 T o position the DIMM for insertion, orient it at the same angle as the DIMM socket. The two notches (ke ys) on the botto m edge of the module ensure that t he DIMM edge connector is register ed properly in the so[...]

  • Page 79

    79 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Regulatory, Compliance, an d Safety Information Checking the DIMM Installation After you install ne w DIMMs and replac e the PRP in the router , the router reinitializes the PRP and detects the memory ch ange as part of the reiniti alization cycl e. The time required [...]

  • Page 80

    Regulatory, Compliance, a nd Safety Informa tion 80 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Translated Safety Warnings and Agency Approvals The complet e list of translated safety w arnings and agenc y appro v als is a vaila ble in the Re gulatory Compliance an d Safety Information for Cisco 1200 0 Series Int[...]

  • Page 81

    81 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Regulatory, Compliance, an d Safety Information • Plug the equipment int o an outlet that is on a d iff erent circuit from the tele vision or radio. (T hat is, make certain th e equipment and t he telev ision or radio are on circuits co ntrolled b y dif ferent circu[...]

  • Page 82

    Regulatory, Compliance, a nd Safety Informa tion 82 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Class A Notice for Hungary Class A Notice for Taiwan and Other Traditional Chinese Markets War ni ng This equipment is a class A product and sh ould be used and installed pro perly according to the Hungaria n EMC Class[...]

  • Page 83

    83 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Regulatory, Compliance, an d Safety Information VCCI Class A Notice for Japan Class A Notice for Korea War ni ng This is a Class A product based on t he standard of the V oluntary Control Council for Interference by Information T echnolog y Equipment (VCCI). If this e[...]

  • Page 84

    Obtaining Documentation 84 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Obtaining Documentation Cisco documentation and additi onal litera ture are a vailable on Cisco.com. This section e xplains the product do cumentation resources t hat Cisco of fers. Cisco.com Y ou can acce ss the most current Cisco documentati[...]

  • Page 85

    85 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Documentation Feedback Ordering Documentation Y ou must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order Cisco documentation at th e Product Documentation Store at this URL: http://www .cisco.com/go/marketp lace/docstore If you do[...]

  • Page 86

    Cisco Produ ct Securit y Overview 86 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 T o see security advisorie s, security notices, and securi ty responses as they are updated in real ti me, you can subscribe t o the Product Security Incident Response T e am Really Simple Syndicat ion (PSIR T RSS) feed. Information [...]

  • Page 87

    87 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Product Aler ts and Field Notices If you do not ha ve or use PGP , contact PSIR T to f ind other means of encrypting the data before sending any sensiti ve material. Product Alerts and Field Notices Modif ications to or updates about Cisco products are an nounced in C[...]

  • Page 88

    Obtaining Technical Assistanc e 88 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Access to all tools on the Cisco T echnical Support & Documentation website requires a Cisco.com user ID and password. If you h av e a valid service co ntract but do not ha ve a user I D or password , you can regi ster at this URL:[...]

  • Page 89

    89 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Obtaining Te chnical Assistance solutions. If yo ur issue is not resolv ed using the recommended resources, your service request is assigned to a Cisco e ngineer . The T A C Service Request T ool is located at t his URL: http://www .cisco.com/techsuppo rt/servicereque[...]

  • Page 90

    Obtaining Additional Publ ications and Information 90 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01 Obtaining Additional Publications and Information Information about Cisco pro ducts, tech nologies, and netw ork solutions is av ailable from v arious online and printed sources. • The Cisco Online Subscription Cen[...]

  • Page 91

    91 Performance Route Processor In st allation and Configuration Guide OL-11656-01 Obtaining Additional Pub lications and Information • Networking Prof essionals Connection is an interacti ve website where networking pro fessionals share questions, sug gestions, and information about network ing products an d technologies with Cisco e xperts and o[...]

  • Page 92

    Obtaining Additional Publ ications and Information 92 Performance Route Processo r Instal lation an d Configuration Guide OL-11656-01[...]