Buffalo LinkStation Pro Quad 8.0TB manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Buffalo LinkStation Pro Quad 8.0TB, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Buffalo LinkStation Pro Quad 8.0TB one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Buffalo LinkStation Pro Quad 8.0TB. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Buffalo LinkStation Pro Quad 8.0TB should contain:
- informations concerning technical data of Buffalo LinkStation Pro Quad 8.0TB
- name of the manufacturer and a year of construction of the Buffalo LinkStation Pro Quad 8.0TB item
- rules of operation, control and maintenance of the Buffalo LinkStation Pro Quad 8.0TB item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Buffalo LinkStation Pro Quad 8.0TB alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Buffalo LinkStation Pro Quad 8.0TB, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Buffalo service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Buffalo LinkStation Pro Quad 8.0TB.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Buffalo LinkStation Pro Quad 8.0TB item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    LinkStation User Manual Buffalo Inc. www .buf falotech.com 35011114 ver.06[...]

  • Page 2

    LinkStation User Manual 1 C ont ents Chapter 1 Setup ............... ......................................................................... 5 LinkNavigat or Setup (LS -VL, LS- XHL, LS-CHL) ......................................... 5 LinkNavigat or Setup (LS -WVL, LS-WXL) ..................................................... 7 LinkNavigat or Setu[...]

  • Page 3

    LinkStation User Manual 2 Adding Gr oups ............................................................................................................ 55 Admin P assword ......................................................................................................... 56 Network ................................................................[...]

  • Page 4

    LinkStation User Manual 3 Squeezebox Server .................................................................................................... 129 Flickr Suppor t ............................................................................................................... 130 Eye-Fi c onnec ted ..................................................[...]

  • Page 5

    LinkStation User Manual 4 Complianc e I nformation ................................................................................. 196 T roubleshooting ................................................................................................. 197 Data Backup ..................................................................................[...]

  • Page 6

    LinkStation User Manual 5 Chapter 1 Setup 1 Connect the LinkStation with an Ether net cable and the included A C adapter . Plug the power cord int o a su rg e pro tec tor or p ower out le t. Conn ec t the Eth er n et cab le to a ro ute r , hu b, or switch on your network. The Ethernet cable will “ click ” and lock in place when inser ted proper[...]

  • Page 7

    Chapter1 Setup LinkStation User Manual 6 Notes: If you are using Windows 7 or Vista, the autoplay scr een may appear . Click [Run LSNavi. exe]. If “Do you want to allow the f ollowing progr am to make changes to this computer?” is displayed in Windows 7, please click [ Y es]. If “ A program needs y our permission to continue ” is displayed [...]

  • Page 8

    Chapter1 Setup LinkStation User Manual 7 1 Connect the LinkStation with an Ether net cable and the included A C adapter . Plug the power cord int o a su rg e pro tec tor or p ower out le t. Conn ec t the Eth er n et cab le to a ro ute r , hu b, or switch on your network. The Ethernet cable will “ click ” and lock in place when inser ted properl[...]

  • Page 9

    Chapter1 Setup LinkStation User Manual 8 Notes: If you are using Windows 7 or Vista, the autoplay scr een may appear . Click [Run LSNavi. exe]. If “Do you want to allow the f ollowing progr am to make changes to this computer?” is displayed in Windows 7, please click [ Y es]. If “ A program needs y our permission to continue ” is displayed [...]

  • Page 10

    Chapter1 Setup LinkStation User Manual 9 1 Connect the LinkStation with the AC adaptor and an Ethernet cable. Plug the power cord into a surge protector or power outlet. Connect the Ethernet cable to a router , hub, or switch on your network. The Ethernet cable will “ click ” and lock in place when inserted properly . LinkStation 2 Move the P o[...]

  • Page 11

    Chapter1 Setup LinkStation User Manual 10 4 Inser t the Utilit y CD in your computer’ s CD drive. LinkNa vigator will launch. Click [Begin Installation]. The wizar d will guide you through installation. Notes: If LinkNavigator does not launch automa tically , open the Utility CD and double - click [LSNavi.ex e]. If you are using Windows 7 or Vist[...]

  • Page 12

    Chapter1 Setup LinkStation User Manual 11 6 7 The LinkStation ’ s shared folder opens . Y ou can now use the LinkStation ’ s shared folder t o save les just like any other f olders. Note: W ith OS X, the LinkStation is mounted as a drive on the deskt op or displayed in the sidebar of the F inder . Setup is now complete . Double - click your [...]

  • Page 13

    Chapter1 Setup LinkStation User Manual 12 LinkNaviga tor Setup (LS -QVL) 1 Connect the LinkStation with an Ether net cable and the included A C adapter . Plug the power cord int o a su rg e pro tec tor or p ower out le t. Conn ec t the Eth er n et cab le to a ro ute r , hu b, or switch on your network. The Ethernet cable will “ click ” and lock[...]

  • Page 14

    Chapter1 Setup LinkStation User Manual 13 Notes: If you are using Windows 7 or Vista, the autoplay scr een may appear . Click [Run LSNavi. exe]. If “Do you want to allow the f ollowing progr am to make changes to this computer?” is displayed in Windows 7, please click [ Y es]. If “ A program needs y our permission to continue ” is displayed[...]

  • Page 15

    Chapter1 Setup LinkStation User Manual 14 Diagrams and La yout (LS- VL, LS-XHL, LS- CHL) 1 P ower LED Blue LED: P ower on. LED is OFF: P ow er o . Blinks blue:During star tup or shutdown. Amber light is ashing: The amber light ashes if there is a message. F lashing pattern varies depending on the message. F or more information, ref er to &[...]

  • Page 16

    Chapter1 Setup LinkStation User Manual 15 7 8 4 5 6 7 8 3 5 Back 3 F an Do not block the fan when installing the unit. 4 USB 2.0 Connector Y ou may attach a USB device such as a digital camera, printer , memor y card reader , or hard drive. USB hubs, mic e, keyboards , and all-in- one printers are not supported. USB card readers tha t suppor t mult[...]

  • Page 17

    Chapter1 Setup LinkStation User Manual 16 Back Diagrams and La yout (LS- WVL, LS - WXL) F ront 1 1 P ower LED Blue LED: P ower on. LED is o : Po wer o . Blinks blue: During star tup or shutdown. 2 F unc tion LED The Function LED glows blue wh en dir ec t cop y is ni shed, dur ing initialization, and during USB dismounting (about 60 seconds[...]

  • Page 18

    Chapter1 Setup LinkStation User Manual 17 5 USB 2.0 connector Y ou may attach a USB device such as a digital camera, print er , memor y card reader , or hard drive. USB hubs , mice, keyboar ds, and all-in-one printers are not suppor ted. USB car d readers that support multiple memor y cards may not function properly . 6 P ower Mode S witch A UT O: [...]

  • Page 19

    Chapter1 Setup LinkStation User Manual 18 Back Diagrams and La yout (LS- WSXL) F ront 1 1 F unc tion Button The F unction Button initiates direct copy , dismounts USB devices, and is used to initialize the LinkStation. 2 F unc tion LED The Function LED glows blue wh en dir ec t cop y is ni shed, dur ing initialization, and during USB dismounting[...]

  • Page 20

    Chapter1 Setup LinkStation User Manual 19 5 P ower LED (LinkS tation) Blue LED: P ower on. LED is o : Po wer o . Blinks blue: During star tup or shutdown. 6 Security lock for anti-theft Many security cables are compatible with this lock. 7 USB 2.0 connector Y ou may attach a USB device such as a digital camera, print er , memor y card reader [...]

  • Page 21

    Chapter1 Setup LinkStation User Manual 20 Diagrams and La yout (LS- QVL) Back F ront 1 1 P ower Butt on Power on: Press the power button to turn on. Power o: Press and hold the power button for 3 seconds. 2 P ower LED Blue LED: Power on. LED is o: Power o. Blinks blue: During star tup or shutdown. Amber light is ashing: The amber light [...]

  • Page 22

    Chapter1 Setup LinkStation User Manual 21 5 USB 2.0 C onnec tor Yo u ma y a t ta c h a US B de v ic e su c h a s a d ig i ta l ca m er a , p ri n te r , me mo r y c a rd r ea d er , or ha r d drive. USB hubs, mice, keyb oards, and all-in -one printers are not supported. USB card readers that support multiple memory cards may not function properly. [...]

  • Page 23

    LinkStation User Manual 22 Chapter 2 U sing your LinkS tation Double click on the LinkStation's icon. 1 Launch NAS Navigator2. Notes: In Windo ws, click [Start] - [(All) Pr ograms] - [BUFF AL O] - [BUFF AL O NAS Navigator2] - [BUFF AL O NAS Navigator2]. In Mac OS, double click on the [NAS Navigator2] icon in the Dock. 2 3 The LinkStation ’ s[...]

  • Page 24

    Using your LinkStation LinkStation User Manual 23 1 Inser t the Utilit y CD in your computer’ s CD drive. LinkNa vigator will launch. Notes: If LinkNavigator does not open, open the Utility CD and double - click [LSNavi.ex e]. If you are using Windows 7 or Vista, the autoplay scr een may appear . Click [Run LSNavi. exe ’] If “Do you want to a[...]

  • Page 25

    Using your LinkStation LinkStation User Manual 24 5 Launch NAS Navigator2: In Window s, click [Star t] - [( All) P rograms] - [BUFF AL O] - [BUFF AL O NAS Navigator2] - [BUFF AL O NAS Navigator2]. In OS X, double - click on the [NAS Navigator2] icon in the Dock. 6 7 The LinkStation ’ s shared folder opens . Note: On Mac OS, LinkStation is mounted[...]

  • Page 26

    Using your LinkStation LinkStation User Manual 25 A UT O: When the switch is in the A UT O position, the LinkStation automatically turns o when all computers on the network with NAS Naviga tor2 turn o . If any computer on the network is power ed on, the LinkStation automatically pow ers on as well. ON: The LinkSta tion stays on, even when all[...]

  • Page 27

    Using your LinkStation LinkStation User Manual 26 Manual (default): In this position, the power button on the front of th e LinkStation turns it on and o. It is not aected by the power state of connected computers. Auto: In this position, if all connected computers are turned o, the LinkStation will turn o too. If a connected computer i[...]

  • Page 28

    Using your LinkStation LinkStation User Manual 27 1 F or a PC, double - click the [NAS Navigator2] ic on on your Desktop . F or a Mac, click the [NAS Navigator2] ic on in the Dock . NAS Navigator2 will launch. 2 F or a PC, right-click your T eraStation's icon and choose [P roperties] - [IP Settings]. For a Mac, hold the Contr ol key , click on[...]

  • Page 29

    Using your LinkStation LinkStation User Manual 28 W eb Admin int er face T o open the LinkStation ’ s web -based administration interface, follo w the steps below . 1 Launch NAS Navigator2. In Window s, click [Start] - [(All) Pr ograms] - [BUFF AL O] - [BUFF AL O NAS Navigat or2] - [BUFF AL O NAS Navigator2]. In OS X, double click on [NAS Navigat[...]

  • Page 30

    Using your LinkStation LinkStation User Manual 29 4 Note: The W eb Admin interface is compatible with Internet Explorer 6.0 Service Pack 2 or lat er , F irefo x 1.5 or later , and Safari 3 or later . The W eb Admin interface contains the following sections. The Web A dmin inter face opens. The LinkStation ’ s name, IP addr ess, workgr oup and har[...]

  • Page 31

    Using your LinkStation LinkStation User Manual 30 To open the Web Admin interface from a dierent computer, open a browser and type the LinkStation’s IP address into the URL eld. With a Mac, you can open the Web Admin interface from Bonjour as described below. 1 Launch Safari. 2 Select [View] - [View Bookmark Bar] from Safari’s menu. 3 1 E[...]

  • Page 32

    Using your LinkStation LinkStation User Manual 31 1 Enter desired characteristics for the new share. Note: If you would like to copy the settings of an existing folder, select a source folder from the [Copy Settings From] dropdown. 2 Click [Save]. 2 You have created a new share. A dding shared f olders By default, the LinkStation includes one share[...]

  • Page 33

    Using your LinkStation LinkStation User Manual 32 • File and folder names should contain 255 single-byte characters or less (UTF-8). DBCS characters (such as Japanese) count as two characters (2 bytes) each. File and folder names should contain 255 bytes of data or less. You may not be able to copy a folder or le whose name contains more than [...]

  • Page 34

    Using your LinkStation LinkStation User Manual 33 Ac cess Restrictions There are several ways to restrict access to users of a LinkStation. Access restrictions for Users and/or Groups on the LinkStation The next page describes how to congure access restrictions for local users and/or groups. Access Restrictions on NT Domain Follow the procedure [...]

  • Page 35

    Using your LinkStation LinkStation User Manual 34 Restricting access for Users and Groups on the LinkStation You can set access restrictions for shared folders by username or group names for users that are registered on the LinkStation. 1 2 Register users and groups on the LinkStation. 1 Add users as described on page 53. 2 Add groups as described [...]

  • Page 36

    Using your LinkStation LinkStation User Manual 35 3 4 5 6 7 Click [Save]. You have assigned access restrictions. • If you log on from a Microsoft Network Domain, you can set the [Access Restrictions] with the users and/or groups which are registered on the domain. • If both [Read only] and [Read & Write] permissions are given to a user, tha[...]

  • Page 37

    Using your LinkStation LinkStation User Manual 36 Access Restrictions on NT Domain The LinkStation can download users, groups, and passwords from an NT Domain server. This procedure is recommended for system administrators only. Note: The LS-CHL LinkStation doesn’t support NT Domain in the US and the EU. 1 Creat e an account on the Domain Contr o[...]

  • Page 38

    Using your LinkStation LinkStation User Manual 37 Notes:• If you change the LinkStation’s name, you will no longer be able to use domain users and groups or access restrictions. Rejoin the domain. • If a domain user name contains more than 20 bytes, the LinkStation truncates it to 20 bytes. • The LinkStation only downloads the rst 1000 u[...]

  • Page 39

    Using your LinkStation LinkStation User Manual 38 Access Restrictions on Active Directory The LinkStation can download users, groups, and passwords from an Active Directory domain server. This procedure is recommended for system administrators only. Note: The LS-CHL LinkStation doesn’t support Active Directory in the US and the EU. 1 Creat e an a[...]

  • Page 40

    Using your LinkStation LinkStation User Manual 39 Notes:• When you have the LinkStation joined to an Active Directory domain, you must specify the DNS Server which can resolve names for Active Directory domain. • After building an Active Directory domain, the administrator’s password which is needed to join the Active Directory domain must be[...]

  • Page 41

    Using your LinkStation LinkStation User Manual 40 Access restrictions by using the Delegate Authority server feature You may administer all user accounts and passwords centrally from a delegate server as described below. This procedure is intended for network administrators only. Notes:• You can set access restrictions on shared folders. You cann[...]

  • Page 42

    Using your LinkStation LinkStation User Manual 41 1 Click [Workgroup] (even if you are in a domain environment). 2 Enter the [Workgroup Name]. To use a Windows Domain Controller as an external SMB authentication server, enter its name for the [Workgroup Name]. 3 Select [Delegate Authority to External SMB Server]. 1 Enter the [Authentication Server [...]

  • Page 43

    Using your LinkStation LinkStation User Manual 42 4 The shared folder for authentication should be created on the LinkStation A user that has been registered to the specied authentication server will be automatically registered as a user on the LinkStation when they open the shared folder for authentication (you can also register users directly)[...]

  • Page 44

    Using your LinkStation LinkStation User Manual 43 Disk Quotas Notes: • When using quotas, disable the recycle bin or empty the trash folder. The limited space includes the space used for trash. • Quotas apply per drive or per array. If a Quota is set to 1 GB, each drive or array can use maximum of 1 GB. • Quotas can’t be set for external US[...]

  • Page 45

    Using your LinkStation LinkStation User Manual 44 3 Select [Shared F olders] - [F older Setup] and click [Creat e F older]. 4 5 6 7 8 Click [Save]. You’ve congured a disk quota for users. 1 Check the user you created in step 2. 2 Click [Add]. 1 Congure the desired settings. 2 Click [Access Restrictions]. Click [Add]. Select level of access [...]

  • Page 46

    Using your LinkStation LinkStation User Manual 45 Disk space quotas for groups To limit the space of shared folders that each group can use, follow the procedure below. 1 2 Notes: • Usernames and passwords should be the same ones that the users log in to Windows with. • If two dierent quotas apply, such a user quota and a group quota, the sm[...]

  • Page 47

    Using your LinkStation LinkStation User Manual 46 4 Note: • Deleting and adding groups repeatedly may cause quotas to not work properly. 5 6 7 Click [Shared F olders] - [F older Setup]. 8 Click [Cr eate F older]. 9 1 Click [Users/Groups] - [Local Users]. 2 Select a user from step 2, and click [Edit User]. Select the group created in step 4 for [P[...]

  • Page 48

    Using your LinkStation LinkStation User Manual 47 10 11 12 13 Click [Save]. You have congured a group quota. 1 Click [Local Groups]. 2 Click [Add]. 1 Check the group you created step 4. 2 Click [Add]. Select level of access privileges for group you added from [Read Only] or [Read & Write].[...]

  • Page 49

    Using your LinkStation LinkStation User Manual 48 FTP Ser ver 1 2 By default, the LinkStation’s shares are only accessible by users connected to the same network or router as the LinkStation. The optional FTP server allows users to access the LinkStation from outside of the local network. You may enable it as follows. In the Web Admin interface, [...]

  • Page 50

    Using your LinkStation LinkStation User Manual 49 Congure your FTP client software with the following settings: • Host Name IP address of the LinkStation. • Username Username registered on the LinkStation • Password Password registered to the LinkStation • Port 21 Example ftp://192.168.11.150/ • You cannot write by FTP if the shared fo[...]

  • Page 51

    Using your LinkStation LinkStation User Manual 50 To allow anonymous access to your FTP share, disable access restrictions on the FTP share. Congure your FTP client as follows: • Host Name IP address of the LinkStation • Username anonymous • Password any set of characters • Port 21 Example ftp://192.168.11.150/ • To make your FTP share[...]

  • Page 52

    Using your LinkStation LinkStation User Manual 51 Direct Copy DirectCopy automatically copies movie, music, and images directly to the LinkStation from a USB device. Direct Copy supports LinkStations that have a USB port. You can connect many types of USB devices to the LinkStation, including USB hard drives, USB ash drives, single-card card rea[...]

  • Page 53

    Using your LinkStation LinkStation User Manual 52 Files are copied to the folder: <shared folder>/pictures/yyyymmdd yyyy: year copied mm: month copied dd: date copied You may change the destination shared folder for DirectCopy in [Shared Folders] - [Direct Copy] - [Modify Settings] in the Web Admin interface. Subsequent DirectCopy folders are[...]

  • Page 54

    Using your LinkStation LinkStation User Manual 53 U sers/Groups Adding U sers Add users as shown below. 1 2 2 Click [Create User]. 1 Congure the desired settings for the new user. 2 Click [Save]. You have added a user. 1 In the Web Admin interface, navigate to [Users/Groups] - [Local Users]. Use the same username and password that the user logs [...]

  • Page 55

    Using your LinkStation LinkStation User Manual 54 Notes: • When using access restrictions, you can register up to 300 users on the LinkStation. • Please do not use any of the following words as a username or a group name: root, bin, daemon, sys, adm, tty, disk, lp, sync, shutdown, halt, operator, nobody, mail, news, uucp, ftp, kmem, utmp, shado[...]

  • Page 56

    Using your LinkStation LinkStation User Manual 55 Adding Gr oups Add groups as shown below: 1 Enter [Group Name] and [Description]. 2 Select users to include in the group. 3 Click [Add], then [Save]. You have added a group. 1 2 1 In the Web A dmin interface, navigate to [Use rs/ Groups] - [Local Groups]. 2 Click [Create Group]. Please do not use an[...]

  • Page 57

    Using your LinkStation LinkStation User Manual 56 In the Web Admin interface, navigate to [Users/ Groups] - [Local Users]. 3 Select [admin] and click [Edit User]. 1 Enter a [Username] and [Password]. 2 Click [Save]. 1 2 You have now changed the admin password. Note: You cannot set access restrictions or use WebAccess with the admin account. Use the[...]

  • Page 58

    Using your LinkStation LinkStation User Manual 57 Jumbo F rame If your other network devices support it, you may be able to increase network performance with Jumbo Frame. Netw ork 1 1 Select [Ethernet Frame Size]. 2 Click [Save]. 2 1 In the Web Admin interface, navigate to [Network] - [Settings] - [Ethernet Frame Size]. 2 Click [Modify Settings].[...]

  • Page 59

    Using your LinkStation LinkStation User Manual 58 Notes: • To use the LinkStation with Jumbo Frame, your router/switch/hub must support Jumbo Frame. • To use Jumbo Frame (4102/7422/9694 bytes), your computer’s NICs and all switches, hubs, and routers on the transmission route need to support Jumbo Frame. If any device on the route does not su[...]

  • Page 60

    Using your LinkStation LinkStation User Manual 59 W eb ser ver The LinkStation can be used as a Web server . HTML, C GI scripts, images, and JavaScript are supported. Note s: • The Li nkSt ati on’ s Web ser ve r is for ad van ced us ers only. D o not enab le it unle ss you know what you ’ re doing . • The LS-CHL LinkStation does not support[...]

  • Page 61

    Using your LinkStation LinkStation User Manual 60 MySQL ser ver The LinkStation can be used as a MySQL server . A MySQL database may be installed and linked with the web server . Notes: • The LinkStation ’ s M ySQL ser ver is f or advanced users only . • Do not enable it unless you know what you ’ re doing . • The LS-CHL LinkStation does [...]

  • Page 62

    Using your LinkStation LinkStation User Manual 61 2 Click [Save]. S yst em-Settings 2 1 3 Name, Da te and Time Congure the LinkStation’s host name, date, or time as follows: 4 1 Enter the [Date] and [Time]. Enter the [LinkStation Name] and [Description], then click [Save]. 1 In the Web Admin interface, navigate to [System] - [Settings] - [Name[...]

  • Page 63

    Using your LinkStation LinkStation User Manual 62 Note: The LinkStation's internal clock may run at a slightly dierent speed from other clocks on you network, and over a long period of time your network devices may show dierent times. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best results[...]

  • Page 64

    Using your LinkStation LinkStation User Manual 63 S yst em-Stor age Check Disk A disk check tests the data on a drive in the LinkStation or connected via USB. Errors are xed automatically. A disk check may run for more than ten hours. Shared folders cannot be accessed during the disk check. Do not turn o power to the LinkStation during the di[...]

  • Page 65

    Using your LinkStation LinkStation User Manual 64 Note: If you access a shared folder from a Macintosh computer, information les for Macintosh may be automatically generated. Do not delete these les from a Windows computer. Otherwise, you may no longer be able to access folders from the Macintosh. If you cannot access them, check [Delete any [...]

  • Page 66

    Using your LinkStation LinkStation User Manual 65 F ormat a Driv e • A format deletes all data from a hard drive. Be careful! Back up any important data on a drive before formatting it. It will take several minutes to format a hard drive. • Shared folders cannot be accessed during formatting. • Do not turn o the power switch or disconnect [...]

  • Page 67

    Using your LinkStation LinkStation User Manual 66 Note: The time needed to format a hard drive varies based on the hard drive's size and format types (a few seconds to several minutes). The Info LED on the front of the LinkStation will ash during formatting. The LinkStation's shared folders cannot be accessed until the disk format is c[...]

  • Page 68

    Using your LinkStation LinkStation User Manual 67 Adding S torage Yo u r Li n kS ta ti o n in c lu d es U S B po rt s. Y ou c a n co n ne ct a B u al o ex te r na l h ar d d ri ve t o it . I t w i ll ap pe a r as a n ad d it io n al s h ar ed f ol d er o n th e L in k St at io n . USB hard drives cannot be added to LinkStations that do not have [...]

  • Page 69

    Using your LinkStation LinkStation User Manual 68 To format a USB hard drive For best results with the LinkStation, reformat the external USB drive from the Web Admin interface. Formatting will delete all data on the drive. Back up any important data before formatting. 1 In the Web Admin interface, navigate to [System] - [Storage]. 2 1 Select the U[...]

  • Page 70

    Using your LinkStation LinkStation User Manual 69 Note: Format type Advantages Disadvantages FAT 32 Drives formatted with FAT 32 can be disconnected from the LinkStation and connected to a Windows or Mac computer directly. They work well with many devices, but do not support large lesizes. • Read/Write support with LinkStation, PCs, and Macs. [...]

  • Page 71

    Using your LinkStation LinkStation User Manual 70 To set access restrictions on an additional hard drive You can set access restrictions for shares on an external USB hard drive. In the Web Admin interface, navigate to [Shared Folders] - [Folder Setup]. Note: Even if a shared folder is not visible, you can still format the drive, run a disk check, [...]

  • Page 72

    Using your LinkStation LinkStation User Manual 71 Remov e Disk To remove the hard drive: If the LinkStation is powered on, dismount the USB hard drive before unplugging it. Hold in the function button for 3 seconds. The blue LED will go out, and the drive is dismounted. You may now unplug it safely. Notes: • If the LinkStation is o, then the U[...]

  • Page 73

    Using your LinkStation LinkStation User Manual 72 S yst em Backup T ime Machine Time Machine is a backup program included with Mac OS X 10.5 and later version. It can back up to your LinkStation if you congure the LinkStation as follows: 3 1 2 Select [Enable] and click [Save]. 1 Click [Shared Folders]. 2 Select a shared folder to use as the back[...]

  • Page 74

    Using your LinkStation LinkStation User Manual 73 4 1 Select [Apple]. 2 Click [Save]. 5 6 7 1 Enter the [Target host name]. 2 Enter the [Target MAC address]. 3 Click [Create]. 1 Click [Extensions] - [Time Machine]. 2 Click [Modify Settings]. 1 Select [Enable]. 2 Select the shared folder that you chose in step 3. 3 Click [Save].[...]

  • Page 75

    Using your LinkStation LinkStation User Manual 74 •You can nd the Mac’s host name under [Computer Name] in [System Preferences] - [Sharing]. e.g.) If it is displayed as "bbbbbbbbbb.local", enter "bbbbbbbbbb" for the host name. If it is displayed as "cccccccccc.eee-ee.local", enter "cccccccccc" for the [...]

  • Page 76

    Using your LinkStation LinkStation User Manual 75 11 Select [System Preferences] from the Apple menu of Mac OS X 10.5. Click [Time Machine]. Click [Choose Backup Disk]. Select the folder on the LinkStation and click [Use for Backup]. 8 9 10[...]

  • Page 77

    Using your LinkStation LinkStation User Manual 76 Enter [Name] and [Password] to access the shared folder on the LinkStation, and click [Connect]. Make sure that the switch for Time Machine is "on". The number of seconds displayed in [Next Backup] will count down and a backup job will start when it hits zero. The backup job will run in th[...]

  • Page 78

    Using your LinkStation LinkStation User Manual 77 1 Back up data on the LinkStation You can back up shared folders on the LinkStation from the Web Admin interface. • Other LinkStation The following sections will discuss how to: • [Setting up the backup destination folder on LinkStation] • [Finding the backup destination folder from LinkStatio[...]

  • Page 79

    Using your LinkStation LinkStation User Manual 78 2 Setting up the backup destination folder on LinkStation # 1 You may congure a destination folder on a LinkStation for backup jobs from a TeraStation or another LinkStation. 1 2 3 Click the shared folder you want to set as a backup destination. In the Web Admin interface, click on [Shared Folder[...]

  • Page 80

    Using your LinkStation LinkStation User Manual 79 3 Finding the backup destination folder from LinkStation # 2 If the password is set for the backup destination folder, you must enter the password to congure the folder as the destination for a backup job. 1 2 3 Click [Modify Settings] in [Search for Backup Destination by Password]. In the Web Ad[...]

  • Page 81

    Using your LinkStation LinkStation User Manual 80 4 Conguring LinkStation # 2 to use LinkStation # 1 as a backup destination 1 2 3 In the Web Admin interface, navigate to [System] - [Backup]. Click [View NAS Devices]. 1 Check the [IP Address] of the LinkStation you want to specify as a backup destination from [Local LinkStations]. 2 Enter IP add[...]

  • Page 82

    Using your LinkStation LinkStation User Manual 81 5 Set up a backup job on LinkStation # 2 1 2 3 In the Web Admin interface, navigate to [System] - [Backup] - [Backup Jobs Setup]. Click [Create New Job]. Select backup options.[...]

  • Page 83

    Using your LinkStation LinkStation User Manual 82 Backup operation modes Three backup operation modes are available. Normal Backup All les in the source folder are backed up to the destination folder. Overwrite Backup (Append Backup) The rst time the backup runs, it backs up all les in the source folder just like a normal backup. If later,[...]

  • Page 84

    Using your LinkStation LinkStation User Manual 83 4 Click [Add] in the [Backup Folders]. 5 6 Select the [Backup Source] and [Backup Targets] folders, then click [Add]. Click [Apply]. The task added is displayed to the backup list. Y ou’v e now congur ed a backup job.[...]

  • Page 85

    Using your LinkStation LinkStation User Manual 84 Notes: • You can register up to the second level of subfolders. However, folders with more than 80 bytes(UTF-8) in their names cannot be selected. • The backup destination device must be congured as a backup destination in advance in order to select it. • For best results, USB hard drives c[...]

  • Page 86

    Using your LinkStation LinkStation User Manual 85 Several RAID modes are a vailable for LinkStation models with multiple har d drives. LinkStations with only one hard drive do not support RAID modes. Notes: All data is lost when the RAID mode is changed. Back up an y impor tant data befor e changing RAID modes. In this document, “Recovery ” mea[...]

  • Page 87

    Using your LinkStation LinkStation User Manual 86 • RAID 5 mode (4 hard drives) RAID 5 mode (4 ha rd dri ves) i s avai lable for Li nkStat ion mod els with 4 har d drive s. U ses 4 ha rd driv es as one array . It gener ates p arity durin g writes , so ac cess sp eeds ar e slo wer th an othe r RAID mod es. Usa ble spa ce is th e sum of 3 hard driv[...]

  • Page 88

    Using your LinkStation LinkStation User Manual 87 • Using in RAID 1 mode 1 Change system to normal mode (page 90). 2 3 4 5 6 Th e [ Co n f i r m Op e r a t i o n ] s c re e n w i l l ap p e a r . E n t e r t h e n u m b e r s h o w n i n t h e [ Co n f i r m a t i o n Number] eld within 60 seconds, and click [ Apply]. While the array is being [...]

  • Page 89

    Using your LinkStation LinkStation User Manual 88 Note: If power is turned o during a RAID rebuild, the RAID r ebuild will continue when power is restor ed. [ Conrm Opera tion] screen When you perform any of the follo wing tasks, a [C onrm Operation] screen is display ed . T o continue, ent er the displayed number within 60 seconds and cli[...]

  • Page 90

    Using your LinkStation LinkStation User Manual 89 • Changing to RAID 0 mode 1 Change system to normal mode (page 90). 2 3 4 5 6 The [C onrm Operation] screen will appear . Enter the number shown in the [C onrmation Number] eld within 60 seconds, and click [ Apply]. 7 F ollow the instructions displayed on the scr een. Y ou have set up a R[...]

  • Page 91

    Using your LinkStation LinkStation User Manual 90 • Changing to Normal mode 1 2 3 Click [Delete RAID Array]. 4 When [Ar e you sure y ou want to change RAID mode?] is display ed, click [Apply]. 5 The [C onrm Operation] screen will appear . Enter the number shown in the [C onrmation Number] eld within 60 seconds, and click [ Apply]. 6 F ol[...]

  • Page 92

    Using your LinkStation LinkStation User Manual 91 • Changing to RAID 5 mode (4 hard drives) 1 Change system to normal mode (page 90). 2 3 4 5 6 Th e [ Co n f i r m Op e r a t i o n ] s c re e n w i l l ap p e a r . E n t e r t h e n u m b e r s h o w n i n t h e [ Co n f i r m a t i o n Number] eld within 60 seconds, and click [ Apply]. While [...]

  • Page 93

    Using your LinkStation LinkStation User Manual 92 • Changing to RAID 5 mode (3 hard drives) 1 Change system to normal mode (page 90). 2 3 4 5 6 Th e [ Co n f i r m Op e r a t i o n ] s c re e n w i l l ap p e a r . E n t e r t h e n u m b e r s h o w n i n t h e [ Co n f i r m a t i o n Number] eld within 60 seconds, and click [ Apply]. While [...]

  • Page 94

    Using your LinkStation LinkStation User Manual 93 • Changing to RAID 10 mode 1 Change system to normal mode (page 90). 2 3 4 5 6 Th e [ Co n f i r m Op e r a t i o n ] s c re e n w i l l ap p e a r . E n t e r t h e n u m b e r s h o w n i n t h e [ Co n f i r m a t i o n Number] eld within 60 seconds, and click [ Apply]. While the array is be[...]

  • Page 95

    Using your LinkStation LinkStation User Manual 94 RMM (RAID Mode Manage) and EDP (Easy Data Protection) Note: LinkStation rm ware version 1.25 and lat er only With RMM or EDP, you can create or expand a RAID 1 or RAID 5 array without erasing the data on the drives. The following example shows RMM. EDP, as used on LS-WVL, LS-WXL, LS-WSXL and LS- [...]

  • Page 96

    Using your LinkStation LinkStation User Manual 95 Adding a drive to an existing RAID array or adding a driv e and changing the RAID mode: 4 The [C onrm Operation] screen will open. Within 60 seconds, en ter the displayed number in the [C onrmation Number] eld. Click [Apply]. While the array is being built, the le tr ansfer speed will be[...]

  • Page 97

    Using your LinkStation LinkStation User Manual 96 RAID S canning LinkStations that are in RAID 1, RAID 5, RAID 10 modes support RAID scanning. A RAID scan tests the RAID array for read performance. If defective sectors are found, they are repaired automatically. If your multiple-drive LinkStation is in RAID 1 mode, you should run RAID scans regular[...]

  • Page 98

    Using your LinkStation LinkStation User Manual 97 E-mail Notication Your LinkStation can send you daily email reports. It can also send you an email when settings are changed or an error occurs. S yst em - Maintenanc e The following things will be sent via E-mail: • The condition of the hard drive • Notication of completed backup jobs •[...]

  • Page 99

    Using your LinkStation LinkStation User Manual 98 5 Enter a password that will be used to verify. 6 To use a secured connection, select [SSL]/[TLS]. 7 Enter the [Subject] for notication e-mail. 8 Enter a receiver's e-mail address. E-mail can be sent to up to 5 addresses. 9 Select conditions for emails to be sent. • [HDD Status Report] Sen[...]

  • Page 100

    Using your LinkStation LinkStation User Manual 99 UPS Settings A UPS (uninterruptable power supply) can automatically shut down your LinkStation in case of a power outage. To use the LinkStation with a UPS, congure the following settings: 1 2 3 Plug the Power cable of UPS to a wall socket. Connect the AC adapter of the LinkStation to the UPS. Co[...]

  • Page 101

    Using your LinkStation LinkStation User Manual 100 To save energy, you can specify times to put the LinkStation into standby mode, where the hard disk and LED lights are turned o. The sleep timer only works when the LinkStation's Power Mode Switch is ON. This feature cannot be used when it is set to AUTO. Note: • If you are using LS-QVL o[...]

  • Page 102

    Using your LinkStation LinkStation User Manual 101 Examples of multiple timers: (e.g.1) It is at 10:00 Wednesday with the LinkStation powered on: Timer 1 Everyday 12:00 - 24:00 Timer 2 not used Timer 3 not used -> Nothing happens at 12:00 and goes into sleep mode at 24:00 (e.g.2) It is at 10:00 Wednesday with the LinkStation powered on: Timer 1 [...]

  • Page 103

    Using your LinkStation LinkStation User Manual 102 Restoring F ac tor y Defaults To initialize the LinkStation to its factory defaults, follow the procedure below. 1 2 3 Move the power switch to the ON position while holding down the function button. The function button will ash blue for 1 minute. While the function button is ashing blue, pre[...]

  • Page 104

    Using your LinkStation LinkStation User Manual 103 Notes: • This method of initializing the LinkStation restores its IP address settings, Ethernet frame size settings, and administrator (admin) password to their factory defaults. If you chose not to initialize the administrator's password from the Web Admin interface, only the IP address and[...]

  • Page 105

    Using your LinkStation LinkStation User Manual 104 Initialization from the Web Admin interface You can initialize the following settings from the Web Admin interface: LinkStation name, Description, NTP settings, Workgroup settings, Shared service settings, access restrictions of the shared folder, User settings, Groups, mail notication settings,[...]

  • Page 106

    Using your LinkStation LinkStation User Manual 105 F ormat the LinkSta tion 1 2 3 4 In the Web Admin interface, navigate to [System] - [Restore/Erase]. Click [Erase]. The [Conrm Operation] screen will be displayed. Enter the number from the [Conrmation Number] eld within 60 seconds, and click [Apply]. Follow the instructions displayed on t[...]

  • Page 107

    Using your LinkStation LinkStation User Manual 106 Online Update LinkStation rmware versions 1.41 and later support online updating. If a new rmware is available, the message “A new version of the rmware has been released. The current rmware can be updated to the latest version.” is displayed when the LinkStation boots. To update th[...]

  • Page 108

    Using your LinkStation LinkStation User Manual 107 Ex tensions W ebAcc ess What is WebAccess? WebAccess lets you access les on your LinkStation through the Internet. Access restrictions can be set for folders that are shared, and automatic router settings by UPnP and redirect f unctionality from the bualonas.com server (similar to Dynamic DNS[...]

  • Page 109

    Using your LinkStation LinkStation User Manual 108 Network -USB Ser ver A Network-USB server lets you connect to USB devices attached to a LinkStation from multiple computers. Only one computer can be connected to each USB device at one time. Before connecting a U SB device to your LinkStation,  rst connect it directly to your computer so that t[...]

  • Page 110

    Using your LinkStation LinkStation User Manual 109 1 Inser t the LinkNavigator CD . 2 The Setup W izard should launch automatically . If not, open the CD and double - click [LSNavi.exe]. LinkNa vigator will launch. 3 Click [Options] - [ Additional Soft ware Installation] - [Network-USB Na vigator] - [Install]. 4 Network-USB Navigator installation i[...]

  • Page 111

    Using your LinkStation LinkStation User Manual 110 Print Server LinkStation is equipped with a USB connector on the back. LS-QVL LinkStation is equipped with a USB connector each on the front and back. You can connect a USB printer to the LinkStation as shown below. Notes: • Only one printer can be connected to the LinkStation. • The LinkStatio[...]

  • Page 112

    Using your LinkStation LinkStation User Manual 111 Setting up a printer on Windows 7/Vista 2 Select [Enable] and click [Save]. 3 Refer to your printer's manual installation instructions. You may need to install the printer driver from a software disk. 4 Click [Start] - [Network]. 5 Double-click on the LinkStation's server name. 6 Double-c[...]

  • Page 113

    Using your LinkStation LinkStation User Manual 112 8 1 Select your printer. Choose the manufacturer on the left and the model on the right. If your printer is not listed, click [Have Disk] and follow the printer manufacturer’s directions for installation. 2 Click [OK]. You have added a printer.[...]

  • Page 114

    Using your LinkStation LinkStation User Manual 113 Setting up a printer on Windows XP 2 1 Choose [Enable] and click [Save]. 3 Refer to your printer’s manual installation instructions. You may need to install the printer driver from a software disk. 4 Click [Start] - [Control Panel]. 5 Click [Network and Internet Connections] icon. 7 Double-click [...]

  • Page 115

    Using your LinkStation LinkStation User Manual 114 9 1 Select your printer. Choose the manufacturer on the left and the model on the right. If your printer is not listed, click [Have Disk] and follow the printer manufacturer’s directions for installation. 2 Click [OK]. You have added a printer.[...]

  • Page 116

    Using your LinkStation LinkStation User Manual 115 Setting up a printer on Windows 2000 2 1 Click [Enable]. 2 Click [Save]. 3 Refer to your printer's manual to install the printer driver. 4 Double-click [My Network Places (*)] -[Entire Network] - (the LinkStation Server Name). * On Windows NT 4.0 this is [Network]. 5 Double-click on the LinkSt[...]

  • Page 117

    Using your LinkStation LinkStation User Manual 116 8 1 Select your printer. Choose the manufacturer on the left and the model on the right. If your printer is not listed, click [Have Disk] and follow the printer manufacturer’s directions for installation. 2 Click [OK]. You have added a printer.[...]

  • Page 118

    Using your LinkStation LinkStation User Manual 117 BitTorrent is a protocol for sharing les. You can download les quickly since les are distributed on the network and network trac is not concentrated, even with a large le. It does not keep anonymity, and it is easily known who publishes what les. Warning: Do not download copyright[...]

  • Page 119

    Using your LinkStation LinkStation User Manual 118 Enabling BitTorrent and selecting folders 1 3 1 Click [Enable]. 2 Select a folder for downloads on the LinkStation from [Download Folder]. 3 Click [Save]. Click [Open Download Manager]. Note: If you click [Initialize BitTorrent Settings], you can initialize BitTorrent settings. 1 In the Web Admin i[...]

  • Page 120

    Using your LinkStation LinkStation User Manual 119 DLNA Ser ver The LinkStation is eq uipped with a DLNA server. Video s, pictures and music saved on t he LinkStation can be displayed or played on TV, audio devices, game devices and other DLNA compatible network devices. DLNA (Digital Living Network Alliance) denes Home Network Device Interopera[...]

  • Page 121

    Using your LinkStation LinkStation User Manual 120 Connecting to the LinkStation and playing the les 3 1 2 Connect DLNA compatible devices to the network and turn them on. Note: Refer to the devices’ manuals for how to connect them. Select the DLNA server of the LinkStation from the screen to select DLNA compatible devices Select from [Videos][...]

  • Page 122

    Using your LinkStation LinkStation User Manual 121 4 Select the le that you want to play, then play it.[...]

  • Page 123

    Using your LinkStation LinkStation User Manual 122 DLNA Server Settings By default, the LinkStation is set to allow all videos, pictures, and music in the shared folder “share“ to be played. You may congure it to only play videos, pictures, and music from a specic folder. 1 2 3 4 Click [Save] at the bottom of the page. Now, only les sa[...]

  • Page 124

    Using your LinkStation LinkStation User Manual 123 To view DLNA compatible devices connected to the LinkStation: 1 2 A list of DLNA compatible devices on the network will appea r, sho wing [ MAC Add ress], [IP A ddress] and [ Device Name]. If a DLNA device does not broadcast its name or IP address, it will be displayed as [cannot be acquired]. Afte[...]

  • Page 125

    Using your LinkStation LinkStation User Manual 124 DLNA Media List The LinkStation will maintain a database of videos, pictures, and music saved in its media folder and distribute a list of available media to DLNA media players on the network. This list is distributed after each reboot and once every 60 minutes by default. Congure the database a[...]

  • Page 126

    Using your LinkStation LinkStation User Manual 125 If other DLNA media devices do not recognize the LinkStation: If the Media Server on the LinkStation is disabled, other DLNA devices won’t be able to see it. You may enable the Media Server on the LinkStation as follows. 2 3 Click [Save]. Click [Enable]. 1 In the Web Admin i nterface, n avigate t[...]

  • Page 127

    Using your LinkStation LinkStation User Manual 126 To disable playback from a specic DLNA media player By default, the LinkStation will allow playback from any compatible media player on the same network. To prohibit playback for a specic DLNA media player, follow the directions below. 2 Select [Deny] for DLNA media player(s) that you want to[...]

  • Page 128

    Using your LinkStation LinkStation User Manual 127 Troubleshooting: Problem: The DLNA media player can’t see media les on the LinkStation If your DLNA media players can’t access the media les on the LinkStation, then the list of available media les should be updated. Try the following: 2 3 Select [Enable] for [Media Server] and [Automa[...]

  • Page 129

    Using your LinkStation LinkStation User Manual 128 Using iT unes with the Media Ser ver Computers on the network running iTunes can access MP3, M4A, and M4P music les from the LinkStation’s media server. Enable the LinkStation’s media server as described below. 2 1 Select [Enable]. 2 Select the source folder. 3 Click [Save]. Note: If you add[...]

  • Page 130

    Using your LinkStation LinkStation User Manual 129 Squeezebo x Ser ver The Squeezebox is a network music player by Logitech that can play back music stored on your network using your wired or wireless LAN. Enable the Squeezebox Server to play music on the LinkStation with the Squeezebox. No computer is neede d. Follow the procedure below to cong[...]

  • Page 131

    Using your LinkStation LinkStation User Manual 130 Flickr Suppor t Flickr (www.ickr.com) is a photo sharing website operated by Yahoo! Inc. After linking your LinkStation’s shared folder to Flickr, you can use the features below. • Your Flickr image data is synchronized with your LinkStation shared folder. Images saved to the LinkStation’s[...]

  • Page 132

    Using your LinkStation LinkStation User Manual 131 5 6 Click [OK, I’LL A UTHORIZE IT ] to display your authentication key (a 9-digit number). Make a note of the displayed authen tication key . 7 The folder on your LinkStation is now linked to your Flickr account, and your pictures will sync in both places. Drag-and-drop pictures to the folder to [...]

  • Page 133

    Using your LinkStation LinkStation User Manual 132 Notes: • Displaying images will take longer than opening les saved on your computer’s hard drive. • The size of image les may be displayed as 0 bytes until the image le is completely transferred. • After copying an image le, it may take some time for the le to be uploaded to [...]

  • Page 134

    Using your LinkStation LinkStation User Manual 133 1 If using the Eye-Fi card for the rst time, connect the Eye-Fi card to the computer beforehand to make the initial settings. Note: F or t he mounting pr ocedure, driver inst allation procedure , and r emoval procedure , ref er to the manual supplied with the Ey e -Fi car d. 2 Remove the Ey e -F[...]

  • Page 135

    Using your LinkStation LinkStation User Manual 134 Notes: • Video les are not copied to the LinkStation. • Only JPEG images are copied. • In step 7, if the LinkStation is not set as the Destination, images will not be transferred to the LinkStation. • After a picture is taken, it may take some time for it to be transferred to the LinkSta[...]

  • Page 136

    LinkStation User Manual 135 Chapter 3 NAS Na vigator2 NAS Navigator2 is a utility prog ram that makes it simple to display the W eb Admin interface, change its IP address or check its hard driv e. W indows V ista/XP/2000 and W indows Server2003/Server2008 If you set up the LinkStation with the LinkNavigat or CD , NAS Navigator2 is installed and con[...]

  • Page 137

    Chapter3 NAS Navigator 2 LinkStation User Manual 136 Name Descriptions Menu Map remote default share t o drive letter (*) Assigns the LinkStation 's shared folder as a network drive . Disconnect mapped drive letter (*) Removes the network drive mapping . Map all remote shares t o drive letters Assigns all the LinkStation 's shared folders[...]

  • Page 138

    Chapter3 NAS Navigator 2 LinkStation User Manual 137 Menu I tem Descriptions LinkStation Name Brow se Shares Opens the LinkSta tion ’ s Share folder . Open W eb Admin Opens the W eb Admin in ter face in a web bro wser . Pr oper ties Opens the LinkStation ’ s properties page. Map remote default share to drive letter Assigns the LinkStation ’ s[...]

  • Page 139

    Chapter3 NAS Navigator 2 LinkStation User Manual 138 Menu I tem Descriptions W eb Admin Opens a W eb Admin in ter face. IP Settings If [Obtain an IP address automa tically via DHCP] is checked, the LinkStation will attempt to get its IP addr ess automatically from a DHCP server . Alternately , you can manually enter the [IP A ddress], [Subnet Mask][...]

  • Page 140

    Chapter3 NAS Navigator 2 LinkStation User Manual 139 Mac OS X 10.3.9 or later If you installed the LinkStation with the LinkNavigat or CD , NAS Navigator2 was installed automatically . T o launch it, click the NAS Navigator2 icon in the Dock. Click on a LinkStation ’ s icon to display its t otal capacity, used capacity , [ WORKGROUP], [IP Address[...]

  • Page 141

    LinkStation User Manual 140 Name Descriptions Name Displays the name of the LinkStation. F irmware v ersion Displays the rm ware version of the LinkStation. IP Address Displays the IP addr ess of the LinkStation. W orkgroup Displays the LinkStation ’ s workgroup . Storage Displays the total capacity of the LinkStation ’ s hard drive, as w el[...]

  • Page 142

    Chapter 4 W eb Admin interface LinkStation User Manual 141 Shared F olders The following options can be set from the [Shared Folders] screen. Name Descriptions F older Setup F older Setup Click [Create Folder] to open the Adding a New Shared Folder screen. Click a shared folder name to open the shared folder's settings screen. Select the share[...]

  • Page 143

    Chapter 4 W eb Admin interface LinkStation User Manual 142 Name Description F older Setup > New F older Click [Cr eate F older] to view this option. V olume Select the volume for the shared f older . Shared F older Attributes The shared f older may be read-only or writable. Recycle Bin If enabled, deleted les are mo ved to a trashbo x folder [...]

  • Page 144

    Chapter 4 W eb Admin interface LinkStation User Manual 143 Name Description Access Restrictions Click [Access Restrictions] from the [Create Shared Folders] screen to view this option. Access Restrictions If using access restrictions, click [A dd ] to add users or groups that will be allowed t o access the share. Y ou may delete users and groups fr[...]

  • Page 145

    Chapter 4 W eb Admin interface LinkStation User Manual 144 Name Descriptions Local Users Local Users Displays [Username], [User Id], [Description], and [P rimar y Group]. T o create a new user , click [Create U ser]. T o edit the user , select the user name and click [Edit User]. T o delete the user , selec t the user and click [Delete]. If [Delega[...]

  • Page 146

    Chapter 4 W eb Admin interface LinkStation User Manual 145 Name Descriptions Local Users > New User To display, click [Create a user]. Password Enter the user ’ s password. This should be the same password that the user uses to log in to his comput er . P asswords may c ontain up to 20 bytes(UTF-8). Do not use multi-byt e characters. Alphanume[...]

  • Page 147

    Chapter 4 W eb Admin interface LinkStation User Manual 146 Name Descriptions Local Groups Local Groups Displays [Group Name], [Group Id], and [Description]. To create a new group, click [Create Group]. To edit a group, select it and click [Edit Group]. To delete a group, select it and click [Delete]. Note: Enter a letter in the [Find] eld and gr[...]

  • Page 148

    Chapter 4 W eb Admin interface LinkStation User Manual 147 Name Descriptions IP Address Settings Click [M odify Settin gs] to change settings. DHCP If enabled, the LinkStation will attempt to get its IP address from a DHCP server on the network. Primary IP Address Set IP address. Subnet Mask Set Subnet Mask. Default Gateway Address Specify by IP ad[...]

  • Page 149

    Chapter 4 W eb Admin interface LinkStation User Manual 148 Name Descriptions Workgroup/Domain Click [M odify Settin gs] to change settings. Authentication Method Select the method to join the network ([ Workgr oup], [NT Domain], or [Active Dir ector y]). [ Workgr oup] is the default. Networking knowledge is r equired t o congur e other methods .[...]

  • Page 150

    Chapter 4 W eb Admin interface LinkStation User Manual 149 Name Descriptions Workgroup/Domain Click [M odify Settin gs] to change settings. Active Directory Domain Name (DNS/Realm Name) Enter [A ctive Director y Domain Name (DNS/Realm Name)] when selecting [Active Directory] as a method to join the network. * Y ou can enter up to 255 byt es(UTF-8).[...]

  • Page 151

    Chapter 4 W eb Admin interface LinkStation User Manual 150 Name Descriptions Workgroup/Domain Click [M odify Settin gs] to change settings. For Workgroup Authentication Select the user authentication method here. [Delegate Authority to LinkStation] (usually r ecommended) Only register ed users may access the LinkSta tion. Usernames and passwords sh[...]

  • Page 152

    Chapter 4 W eb Admin interface LinkStation User Manual 151 Name Descriptions Workgroup/Domain Click [M odify Settin gs] to change settings. Enable Authentication Shared Folder When [Delegate A uthorit y to External SMB Ser ver] , [Aut omatic User Registration], and [Enable A uthentication Shared F older] are selected for the [F or W or kgroup A uth[...]

  • Page 153

    Chapter 4 W eb Admin interface LinkStation User Manual 152 Name Descriptions Web Server Settings Click [M odify Settin gs] to change settings. LS-A VL, LS- CHL and LS-SL LinkStation models do not suppor t W eb Ser ver . T arget F older Select a target folder for the Web Server to access. - (Target folder)/htdocs/ • This folder holds the content. [...]

  • Page 154

    Chapter 4 W eb Admin interface LinkStation User Manual 153 Name Descriptions MySQL Server Settings Click [M odify Settin gs] to change settings. LS-A VL, LS- CHL and LS-SL LinkStation models do not suppor t MySQL Ser ver . MySQL Server Enable to use MySQL server. Port No. Enter the number of a port for MySQL server. Data Folder Th is s e l ec t s t[...]

  • Page 155

    Chapter 4 W eb Admin interface LinkStation User Manual 154 S yst em The follo wing options can be set from the [Syst em] tab. Name Descriptions Settings Name Click [Modify Settings] to change settings. LinkStation Name Enter a name to identify the LinkStation on the network. Names may contain up to 15 bytes(UTF-8). Alphanumeric characters, hyphens,[...]

  • Page 156

    Chapter 4 W eb Admin interface LinkStation User Manual 155 Name Descriptions Storage Disks Check Disk You may run a disk check on hard drives in or attached to the LinkStation via USB. Depending on the size of the disk, a disk check may take many hours to complete. Notes: • You cannot run a disk check at the same time as a backup job. • During [...]

  • Page 157

    Chapter 4 W eb Admin interface LinkStation User Manual 156 Name Descriptions Storage Disks F ormat Disk Y ou may format disks in or connected to the LinkStation. A ll data on the disk will be deleted if the drive is f ormatted. Back up any important data befor e formatting a disk. Y ou cannot format a drive if you ’ve scheduled a backup job . Als[...]

  • Page 158

    Chapter 4 W eb Admin interface LinkStation User Manual 157 Name Descriptions Storage Disks F ormat Disk F ormat type Descr iptions XFS (USB Hard Drive/ LinkStation Internal Hard Drive) This format is r ecommended for the int ernal drive in the T eraStation or LinkStation. • Supports both Reading/Writing. • Supports Journaling File System. • M[...]

  • Page 159

    Chapter 4 W eb Admin interface LinkStation User Manual 158 Name Descriptions Storage RAID Array *1 *1: LinkStation models with multiple hard drives only Congure RAID arra ys from this menu. Sever al RAID modes are available for LinkStation models with multiple hard driv es. If RAID is disabled, the drives in the LinkStation will be available as [...]

  • Page 160

    Chapter 4 W eb Admin interface LinkStation User Manual 159 Name Descriptions Storage If many reco verable errors (bad cluster) ar e found in one of the hard driv es which builds RAID , that drive will be remov ed and the system will automatically move t o degrade mode. Since the data is not prot ected in the degrade mode, it is strongly recommended[...]

  • Page 161

    Chapter 4 W eb Admin interface LinkStation User Manual 160 Name Descriptions Backup Search for Backup Destination by P assword Click [Modify Settings] to change settings. P assword to Search Enter a passwor d to search f or LinkStations and T eraStations with that password f or backup. Example of Congur ation Conguration on the LinkSta tion ([...]

  • Page 162

    Chapter 4 W eb Admin interface LinkStation User Manual 161 Name Descriptions Backup Search for Backup Destination by P assword Click [Modify Settings] to change settings. P assword to Search Steps for Setup 1 In the W eb Admin interface of the backup destination, set [Remote backup password] f or each shared folder . 2 When setting up the backup fo[...]

  • Page 163

    Chapter 4 W eb Admin interface LinkStation User Manual 162 Name Descriptions Backup Backup Jobs Setup Click [Cr eate New Job] to display this option in the [Backup ]screen. Job Name Enter the name you w ant for a backup task. Backup Job Schedule Select the schedule to run from [Not Scheduled], [Immediate], [Every Day], [Every W eek][1st], [2nd], [3[...]

  • Page 164

    Chapter 4 W eb Admin interface LinkStation User Manual 163 Name Descriptions Backup Backup Jobs Setup Click [Cr eate New Job] to di splay this option in the [Backup ] screen. Backup Operation Mode The following table shows behavior during each operation mode. Behaviors will vary if [Create Target Folder for Backup] is selected or not in Backup Opti[...]

  • Page 165

    Chapter 4 W eb Admin interface LinkStation User Manual 164 Name Descriptions Backup Backup Jobs Setup Click [Cr eate New Job] to display this option in the [Backup ] screen. Backup Options [Cr eate T arget Folder f or Backup]: The options y ou have se lected on the Backup Operation Mode will m ake a big dier ences on behavior . Refer to the tabl[...]

  • Page 166

    Chapter 4 W eb Admin interface LinkStation User Manual 165 Name Descriptions Maintenance Email Notication Click [Modify Settings] to change settings. Click [Send Test Message] to send a test e-mail to the e-mail address which has been set. Notication Select whether using E-mail notication featur e or not. F ollowing message is sent by usin[...]

  • Page 167

    Chapter 4 W eb Admin interface LinkStation User Manual 166 Name Descriptions F irmware Installation Updating F irmware Clicking [Check F or Update] will check for the lat est rmware v ersion. If the installed rmware v ersion is not the latest, click [Install Update] to update the rmw are. P ower Management UPS Settings Click [Modify Settin[...]

  • Page 168

    Chapter 4 W eb Admin interface LinkStation User Manual 167 Name Descriptions Restore/Erase Restore Factory Defaults Upon restore Click [Modify Settings] and select whether or not I nitialization will reset the admin password . Note: If [Keep current admin passwor d] has been selected, you cannot recongur e the LinkStation without the password . [...]

  • Page 169

    Chapter 4 W eb Admin interface LinkStation User Manual 168 Ex tensions The follo wing options can be set from the [Extensions] tab . Name Descriptions W ebAccess WebAccess WebAccess Settings Enable the W ebAcc ess ser vice rst, then click a shared folder name t o display the [Edit] screen. F older information of the LinkStation to be published b[...]

  • Page 170

    Chapter 4 W eb Admin interface LinkStation User Manual 169 Name Descriptions W ebAccess W ebAccess Service Click [A dvanced W ebAccess Settings] to change settings. W ebAccess Ser vice [ W ebAcc ess Ser vice]: Congure if using WebA ccess or not. [HT TPS/SSL Encr yption]: Congure if encrypting your data transf ers with SSL. [Use BualoNAS.co[...]

  • Page 171

    Chapter 4 W eb Admin interface LinkStation User Manual 170 Name Descriptions MediaSer ver Media Ser ver Settings Click [Modify Settings] to change settings. Media Ser ver Settings [Restar t Media Ser ver]: Click to restart the media ser ver . [A uthorized DLNA Media Clients]: This displays the M AC A ddress, IP Addr ess, and Device Name of connecte[...]

  • Page 172

    Chapter 4 W eb Admin interface LinkStation User Manual 171 The LS-WXL LinkStation supports DT CP-IP . Copyright -protected content can be used in pla yers that support DT CP-IP . Incompatible players don ’t display any D T CP-IP -related media. [Update D T CP-IP]: This downloads the lat est version of the D TCP -IP encr yption key . When the down[...]

  • Page 173

    Chapter 4 W eb Admin interface LinkStation User Manual 172 Name Descriptions Time Machine Time Machine Click [Modify Sett ings] to change settings. Time Machine Select [Enable] when using to specify the LinkStation as a backup destination for Time Machine on Mac OS X 10.5 or later . S elect a shared f older as a backup destination in [ T arget F ol[...]

  • Page 174

    LinkStation User Manual 173 Appendix Appendix Specications Check Bualo's catalogs or w eb site (ww w .bualotech.com) f or information about the lat est products or compatible models. Inter face (LAN por t) Inter face: Complied with IEEE802.3ab (1000BASE- T ) Complied with IEEE802.3u (100BASE- T X) Complied with IEEE802.3 (10BASE- T ) [...]

  • Page 175

    LinkStation User Manual 174 Appendix The following settings are factory defaults for the LinkStation. Default Settings Administrator's Name admin Password password Shared folders By default, the folder “share” may be accessed from both Windows and Macintosh computers. The recycle bin is [Enabled] on ‘share’ by default. DHCP Client Norm[...]

  • Page 176

    LinkStation User Manual 175 Appendix Mapping Additional S hares When you installed the LinkStation, a share was mapped as a network drive on the computer that was used for installation. You can map additional shares, or map shares to dierent computers. W indow s With Windows 7/Vista/XP/2000 or Windows Server2003/Server2008, use NAS Navigator2 to[...]

  • Page 177

    LinkStation User Manual 176 Appendix Mac OS X With Mac OS X 10.3 or later, use NAS Navigator2 to mount a share from the LinkStation as a drive on the Mac. 3 Click on the [NAS Navigator2] icon in the Dock. NAS Navigator2 will launch. 1 2 Select the folder that you want to mount and click [OK]. Hold the control key, click on your LinkStation’s icon[...]

  • Page 178

    LinkStation User Manual 177 Appendix Sof t war e Y ou can instal l following sof t ware applic ation s and the manual by using utilit ies CD which comes with the LinkStation. Select and install sof tware from the selec tion scr een which is displayed during Setup (Or click [Op- tion] and follow the instruction on the screen t o install soft ware). [...]

  • Page 179

    LinkStation User Manual 178 Appendix 2 1 When the [Change File Sharing Security Level] window opens, select [Change security level]. 2 Click [Change]. 3 The message, "Change security level. Will you continue?” is displayed. Click [Yes]. 4 The message, "Will you restart your computer?" is displayed. Click [Yes]. Your PC should reboo[...]

  • Page 180

    LinkStation User Manual 179 Appendix TurboCopy TurboCopy speeds up le copy operations in Windows. TurboPC TurboPC optimizes transfer speeds for hard drives by caching data in your computer’s RAM. It works best when TurboCopy is also installed. Note: Your LinkStation does not benet from TurboPC. Note: TurboCopy and TurboPC work with Windows [...]

  • Page 181

    LinkStation User Manual 180 Appendix Info f older In the f older called "info" on the internal hard disk of the L inkStation, Instal l prog rams such as th e NAS Navigator2 is included . [info]-[English] F older   - [NASNavi2] F older . . . Installs NAS Navigator2 by double- click ing Inst.exe.[...]

  • Page 182

    LinkStation User Manual 181 Appendix Sta tus LED (LS - VL, LS-XHL, LS- CHL) During normal operation, the power LED will glow blue. Flashing Red The Power LED ashes red if the LinkStation experiences an error. The way it ashes indicates the type of error. Note: If there is an error, open NAS Navigator2. It may have an error message displayed. [...]

  • Page 183

    LinkStation User Manual 182 Appendix Error code Descriptions E04 The rmware is corrupted. Contact Bualo technical support for assistance. E10 The LinkStation is running on the UPS battery due to a power outage. The system will now be shut down safely. Check that power is being supplied to the UPS, and if there are no problems, turn on the Lin[...]

  • Page 184

    LinkStation User Manual 183 Appendix Power LED ashing amber The Power LED ashes amber with information codes. The way it ashes indicates the message. Note: If the Power LED is ashing amber, you can open NAS Navigator2. It will tell you the status of the LinkStation. Place Status 10s place The LED illuminates for 1.0 second every 0.3 sec[...]

  • Page 185

    LinkStation User Manual 184 Appendix Sta tus LED (LS - WVL, LS - WXL) There ar e 5 LEDs on the LinkStation: “P ower” , “Function ” , “Info/Error” , “Link/Act ” , and “ AC adaptor ” . F unction LED Status Descriptions Glowing Blue DirectCopy is ready (lights for 1 minute). USB device is dismounted (lights for 5 seconds). Initiali[...]

  • Page 186

    LinkStation User Manual 185 Appendix Info/Error LED The Info/Error LED blinks or ange when it has a message. The message is c oded by the pattern of blinking. Note: The messages are also available (uncoded) in NAS Na vigator2. Information code Descriptions I10 System temperature may have exceeded the maximum safe value. Move the LinkStation to a co[...]

  • Page 187

    LinkStation User Manual 186 Appendix The Info/Error LED blinks r ed to indicate an error . The error ma y be identied by the pattern of blinking. Note: The error may also be viewed fr om NAS Navigator2. Error code Descriptions E04 The rmware is corrupted. Contact Bualo technical support for assistance. E10 The LinkStation is running on the[...]

  • Page 188

    LinkStation User Manual 187 Appendix Link/Act LED Status Descriptions Glowing green Linking. Blinking green Accessing. A C adaptor LED Status Descriptions Green Power is connected. O Power is not connected.[...]

  • Page 189

    LinkStation User Manual 188 Appendix Sta tus LED (LS - WSXL) There ar e 4 LEDs on the LinkStation: “F unction ” , “Info/Error ” , “Link/Act ” , and “Po wer ” . Function LED Link/Act LED Info/Error LED Power LED F unction LED Status Descriptions Glowing Blue DirectCopy is ready (lights for 1 minute). USB device is dismounted (lights [...]

  • Page 190

    LinkStation User Manual 189 Appendix Info/Error LED The Info/Error LED blinks or ange when it has a message. The message is coded by the pa ttern of blink ing. Note: The messages are also available (uncoded) in NAS Na vigator2. Information code Descriptions I10 System temperature has exceeded the maximum safe value. Move the LinkStation to a cooler[...]

  • Page 191

    LinkStation User Manual 190 Appendix The Info/Error LED blinks r ed to indicate an error . The error ma y be identied by the pattern of blinking. Note: The error may also be viewed fr om NAS Navigator2. Error code Descriptions E04 The rmware is corrupted. Contact Bualo technical support for assistance. E10 The LinkStation is running on the[...]

  • Page 192

    LinkStation User Manual 191 Appendix Sta tus LED (LS - QVL) During normal operation, the power LED will glow blue. Flashing Red The Power LED ashes red if the LinkStation experiences an error. The way it ashes indicates the type of error. Note: If there is an error, open NAS Navigator2. It may have an error message displayed. Place of error c[...]

  • Page 193

    LinkStation User Manual 192 Appendix E15 The bad sectors in the hard drive have reached a dangerous level. Replace the hard drive indicated by the red Status LED. E16 Unable to nd the hard drive. Hard drive may be disconnected or may have failed. After shutting down, reinstall the hard drive. E22 Mounting of the hard drive failed. Format the har[...]

  • Page 194

    LinkStation User Manual 193 Appendix Power LED ashing amber The Power LED ashes amber with information codes. The way it ashes indicates the message. Note: If the Power LED is ashing amber, you can open NAS Navigator2. It will tell you the status of the LinkStation. Place Status 10s place The LED illuminates for 1.0 second every 0.3 sec[...]

  • Page 195

    LinkStation User Manual 194 Appendix Status LED 1~4 Status LED 2 Status LED 3 Status LED 1 Status LED 4 Status Descriptions Glowing green Normal state. This ashes during access. Glowing red An error occurred in the hard drive. Replace the hard drive indicated by the drive number that is lit red. Link/Act LED Status Descriptions Glowing green Lin[...]

  • Page 196

    LinkStation User Manual 195 Appendix Function LED Function LE D Status Descriptions Glowing Blue When installing a USB device When the USB device is recognized, the Function LED is lit blue (for about 60 seconds). After the Function LED is lit blue, the USB device can be accessed. When removing a USB device To remove a USB device connected to the L[...]

  • Page 197

    LinkStation User Manual 196 Appendix C ompliance Inf ormation FC C Information This equipment has been test ed and found to comply with the limits f or a Class B digital device, pursuan t to P ar t 15 of the FCC Rules . These limits are desig ned to provide r easonable protection against harmful inter fer ence in a residential installation. This eq[...]

  • Page 198

    LinkStation User Manual 197 Appendix T roubleshooting Cannot Setup The following section lists typical occurr ences and cau ses when you cannot setup the Lin kStation by using LinkNavigat or or cannot use LinkStation even after nishing setup , Occ ur ren ce: The mes sag e "Ca nn ot fin d Li nk Sta tio n" , "No avai la ble Lin kS t[...]

  • Page 199

    LinkStation User Manual 198 Appendix Cause 9 . TCP/IP does not work properly. Install the LAN adapter's driver again. Cause 10 . You are running Setup second time or more (it has been already run before). After initializing the LinkStation, follow steps described in "LinkNavigator Setup" on page 5 to run Setup. Note: – When using P[...]

  • Page 200

    LinkStation User Manual 199 Appendix Data Backup While using the LinkStation, you may lose your important data due to sudden accidents, hard disk failure, or accidental misoperation. It is important to back up your data to recover data or minimize losses in such a case. Use Mass Storage class hard disk manufactured by BUFFALO (such as TeraStation/L[...]