Bosch Appliances NBC-265-P manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Bosch Appliances NBC-265-P, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Bosch Appliances NBC-265-P one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Bosch Appliances NBC-265-P. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Bosch Appliances NBC-265-P should contain:
- informations concerning technical data of Bosch Appliances NBC-265-P
- name of the manufacturer and a year of construction of the Bosch Appliances NBC-265-P item
- rules of operation, control and maintenance of the Bosch Appliances NBC-265-P item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Bosch Appliances NBC-265-P alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Bosch Appliances NBC-265-P, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Bosch Appliances service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Bosch Appliances NBC-265-P.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Bosch Appliances NBC-265-P item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    IP Camera 200 Series NBC-265-P en Installation and Operation Manual[...]

  • Page 2

    [...]

  • Page 3

    IP Camera 200 Series Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 T able of Contents 1S a f e t y 7 1.1 Safety precautions 7 1.2 Important safety instructions 8 1.3 FCC & ICES compliance 9 1.4 UL certification 10 1.5 Bosch notices 10 1.6 Copyrights 11 2 Introduction 13 2.1 Fea[...]

  • Page 4

    4 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 5 Basic Mode 27 5.1 Basic Mode menu tree 27 5.2 Device Access 28 5.2.1 Camera name 28 5.2.2 Password 28 5.3 Date/Time 29 5.4 Network 30 5.5 Encoder 31 5.6 Audio 31 5.7 Recordi ng 31 5.7.1 Storage medium 31 5.8 System[...]

  • Page 5

    IP Camera 200 Series Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.6 Alarm 60 6.6.1 Alarm Connections 60 6.6.2 Video Content Analyses (VCA) 63 6.6.3 VCA configuration- Profiles 64 6.6.4 VCA configuration - Scheduled 70 6.6.5 VCA configuration - Event triggered 72 6.6.6 Audio Alar[...]

  • Page 6

    6 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 8.3 Customer service 9 7 9 Maintenance 99 9.1 Repairs 99 9.1.1 Transfer and disposal 99 10 Technical Data 101 10.1 Specifications 101 10.1.1 Dimensions 103 10.1.2 Accessories 103[...]

  • Page 7

    IP Camera 200 Se ries Safety | en 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock,[...]

  • Page 8

    8 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 1.2 Important safety instr uctions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions be fore operati ng the unit. 1. Cleaning[...]

  • Page 9

    IP Camera 200 Se ries Safety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1.3 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules .[...]

  • Page 10

    10 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 1.4 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only test ed fire, shock and/or casualty[...]

  • Page 11

    IP Camera 200 Se ries Safety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1.6 Copyrights The firmware 4.1 uses the fonts "Adobe-Helvetica-Bold-R- Normal--24-240-75-75-P-138-ISO10646-1" and "Adobe - Helvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under the following copyri[...]

  • Page 12

    12 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems[...]

  • Page 13

    IP Camera 200 Series Introduction | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 2 Introduction 2.1 F eature s This HD 720p IP camera is a ready-to-use, complete network video surveillance system inside a compact camera. The camera offers a cost-effective solution for a br oad range of applications. [...]

  • Page 14

    14 en | Introduction IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 2.2 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – IP camera with lens – Universal power supply with US, EU and UK plug – Camera mount kit – Quick install ation guide –[...]

  • Page 15

    IP Camera 200 Se ries Installation | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3 Installation 3.1 SD card Figu re 3.1 SD card 1. Unscrew the cover on the right side of the camera. 2. Slide the SD card into the slot. 3. Close and secure the cover. The camera supports most SD/SDHC cards.[...]

  • Page 16

    16 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.2 Mount ing the camera The camera can be mounted eith er from the top or from the bottom (1/4"-20 UNC thread). The mounting socket is isolated from ground to prevent ground loops. Figure 3.2 Mounting a camera 1. U[...]

  • Page 17

    IP Camera 200 Se ries Installation | en 17 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3. Adjust the ball-socket so that camera moun t is correcrly aligned for the required angle. 4. Screw camera onto mount and, when in position, tighten the locking ring (1) securely. 5. Tighten the ball-socket adjustment[...]

  • Page 18

    18 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.3 Network (and pow er) connect or Figure 3.3 Ne twork connection – Connect the camera to a 10/100 Base-T network. – Use a shielded UTP Category 5e cable with RJ45 connectors. – Power can be supplied to the camera[...]

  • Page 19

    IP Camera 200 Se ries Installation | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.4 P o wer connection 3.4.1 DC power connect ion Figu re 3.4 DC power conn ection 1. Slide the plug adapter that matches your outlet socket onto the supplied power supply. 2. Insert the power connector ja ck from the p[...]

  • Page 20

    20 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.5 I/ O connector Figure 3.5 I/O connector pins – Max. wire diameter AWG 22-28 for both stranded and solid; cut back 5 mm (0.2 in) of insulation. – Relay output switching capability: Max. voltage 24 VAC or 24 VDC. M[...]

  • Page 21

    IP Camera 200 Se ries Installation | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.6 Audio connect ors Figu re 3.6 Audio connectors Connect audio devices to the Line In and Line Out connectors. 1 2 3 4 DC12V Ethernet Lin e-out Reset Lin e-in I/O Line - R GND Line - L Line in: 9 kOhm typ., 200 mV rms[...]

  • Page 22

    22 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.7 Re set ting the camer a If the camera cannot be connected because the IP address has changed, press and hold the reset button (7 se conds approximately) until the LED flas hes (red) to recall the factory default valu[...]

  • Page 23

    IP Camera 200 Series Brow ser connection | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 4 Bro wser connection A computer with Microsoft Internet Ex plorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The ca mera is configured over the network using[...]

  • Page 24

    24 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Note: If the connection is not estab lished, the maximum number of possible connections may already have been reached. Depending on the device and ne twork configuration, up to 25 web browsers, or 50 Bosch VM S co[...]

  • Page 25

    IP Camera 200 Series Brow ser connection | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 4.4 Connection e stablishe d When a connection is established, the LIVEPAGE is initially displayed. The application title ba r displays the type number of the connected camera and three items: LIVEPAGE , RECORDING[...]

  • Page 26

    26 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems the configuration menu is open ed. All settings (except date/ time) are stored in the came ra memory so that they are retained, even if the power is interrupted. Changes that influence the fundamental functioning [...]

  • Page 27

    IP Camera 200 Series Basic Mode | en 27 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5 Basic Mode 5.1 Basic Mode menu tr ee The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic Mode menu to expand it. The [...]

  • Page 28

    28 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 5.2 De vice Acce ss 5.2.1 Camera name The camera can be assigned a name to assist in identifying it. The name simplifies the manageme nt of multiple devices in more extensive systems. The camera name is used for remo te id[...]

  • Page 29

    IP Camera 200 Series Basic Mode | en 29 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Confirm password Re-enter the new password to en sure that there are no ty ping mistakes. The new password is only saved after clicking Se t . Therefore, click Set immediately after entering and confirming the password, ev[...]

  • Page 30

    30 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 5.4 Network Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make the desired changes. 2. Click[...]

  • Page 31

    IP Camera 200 Series Basic Mode | en 31 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5.5 Encoder Select a profile for encoding the video signal. Pre-programmed profiles are available that give pr iority to different parameters. When a profile is selected, its details are displayed. Main frequency and Op er[...]

  • Page 32

    32 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems[...]

  • Page 33

    IP Camera 200 Series Advance d Mode | en 33 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6 Advanced Mode 6.1 Advanced Mode menu tree The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mode menu to expand it. The as[...]

  • Page 34

    34 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.2 G eneral 6.2.1 Identification Camera ID Each camera should be assigned a unique identifier that can be entered here as an addition al means of identification. Camera name Assign a camera name to assist in identifyin[...]

  • Page 35

    IP Camera 200 Series Advance d Mode | en 35 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays. Use the various authorization le vels to limit access. Proper password[...]

  • Page 36

    36 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their inter nal clocks. For exam[...]

  • Page 37

    IP Camera 200 Series Advance d Mode | en 37 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the list boxes under the table, to change the selecte[...]

  • Page 38

    38 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay. It can be displayed at the Top , at the Bottom , or a t a position[...]

  • Page 39

    IP Camera 200 Series Advance d Mode | en 39 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.3 W eb Int er face 6.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necess ary, replace the company's logo (top right) and the device name [...]

  • Page 40

    40 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls. 1. Mark the check boxes for the func[...]

  • Page 41

    IP Camera 200 Series Advance d Mode | en 41 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Allow snapshots Specify whether the icon for saving i ndividual images should be displayed below the live image. Individual images can only be saved if this icon is visible. Allow local recording Specify whether the ic[...]

  • Page 42

    42 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4 Camera 6.4.1 Picture Settings Contrast (0...255) Adjusts the contrast of the image. Saturation (0...255) Adjusts the color saturation; 0 gives a monochrome image. Brightness (0...255) Adjusts the brightness of the i[...]

  • Page 43

    IP Camera 200 Series Advance d Mode | en 43 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 B-gain The blue gain adjustment offsets th e factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the wh ite point offset for special scene conditions. Default Click Defa[...]

  • Page 44

    44 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.2 Encoder Profile The camera generates up to four video streams simultaneously (quad streaming). Set the encode r profiles for these streams to match the operating environment (network structure, bandwidth, processi[...]

  • Page 45

    IP Camera 200 Series Advance d Mode | en 45 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab. Change the name of a prof ile and individual parameter values withi[...]

  • Page 46

    46 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems advantageous with low bandwidths. The image rate in ips (images per second) is displayed next to the slider. Video r esolut ion Select the desired resolution for the video image. The following resolutions are available:[...]

  • Page 47

    IP Camera 200 Series Advance d Mode | en 47 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image defini tion (focus). The value 9 represents maximum image qual[...]

  • Page 48

    48 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.3 Enco der Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2. Select the codec algorithm for stream 2. T he following are available: – Copy Stream 1 – H.[...]

  • Page 49

    IP Camera 200 Series Advance d Mode | en 49 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.4.4 Audio Select the microphone or line-in connector as the Audio input or switch it off. Adjust the Input volume with the slider. Switch the Audio output On or Off . Select G.711 or L16 as the audio Recording format[...]

  • Page 50

    50 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.5 Ins taller Menu Camera LED Disable the Camera LED on the camera to switch it off. Mirror image Enable Mirror image to obtain a vertically flipped image (around the horizontal axis) of the camera picture. Flip imag[...]

  • Page 51

    IP Camera 200 Series Advance d Mode | en 51 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5 Recording Record the images from the camera to local storage media or to an appropriately conf igured iSCSI system. SDHC cards are the ideal solution for shorter storage times and temporary recordings, for example,[...]

  • Page 52

    52 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video Recording Manager manages all recording and no fu[...]

  • Page 53

    IP Camera 200 Series Advance d Mode | en 53 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Note: If a device had primary and seco ndary recording running on the SD card and is then added to a VRM system, the blocks used for primary recording will not be re-used, reducing the available recording space for ANR[...]

  • Page 54

    54 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 4. Check the box in the Rec. 1 or Rec. 2 column to specify which data stream should be recorded on the storage media selected. Rec. 1 stores stream 1, Rec. 2 stores stream 2. 5. Check the boxes for the Overwrite older r[...]

  • Page 55

    IP Camera 200 Series Advance d Mode | en 55 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5.2 Recording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the recordin g profiles on the tab[...]

  • Page 56

    56 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interval from profile: box and sele[...]

  • Page 57

    IP Camera 200 Series Advance d Mode | en 57 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5.3 Retention Time Specify the retention times for recordings. If the available memory capacity of a medium ha s been used, older recordings are only overwritten if the retention time entered here has expired. Make s[...]

  • Page 58

    58 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded in th e event of an alarm. Schedules can be [...]

  • Page 59

    IP Camera 200 Series Advance d Mode | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Profile names To change the names of the reco rding profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recording After completing confi[...]

  • Page 60

    60 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6 Alarm 6.6.1 Alarm Connections Select the respon se of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to ten IP [...]

  • Page 61

    IP Camera 200 Series Advance d Mode | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Number of destination IP address list box. 2. Enter 0.0.0.0 in the Destination IP add[...]

  • Page 62

    62 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems display the alarm image. Refer to the destination device documentation concerning image display options and available video outputs. Decoder Select a decoder of the receiver to display the alarm image. The decoder selec[...]

  • Page 63

    IP Camera 200 Series Advance d Mode | en 63 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorithms. Such changes can be due to movements in the came ra's field of[...]

  • Page 64

    64 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configurations. Save profiles on your computer's ha rd drive and load saved profiles from there. This can be useful if testing a number o[...]

  • Page 65

    IP Camera 200 Series Advance d Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created for a video content analy[...]

  • Page 66

    66 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Minimum object size Specify the number of sensor fiel ds that a moving object must cover to generate an alarm. Th is setting prevents objects that are too small from triggering an alarm. A minimum value of 4 is recommen[...]

  • Page 67

    IP Camera 200 Series Advance d Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Sensitivity and Trigger delay [s] can only be changed if Reference check is selected. Sensitivity The basic sensitivity of the tam per detection can be adjusted for the environmental conditio ns to which the camera is [...]

  • Page 68

    68 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Scene too dark Activate this function if tamperi ng associa ted with covering the objective (for instance, by sprayi ng paint on it) should trigger an alarm. The average brightness of the scene provides a basis for reco[...]

  • Page 69

    IP Camera 200 Series Advance d Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Appearing edges Select this option if the selected area of the reference image includes a largely homogenous surf ace. If structures appear in this area, then an alarm is triggered. Selecting the area Select the image [...]

  • Page 70

    70 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the vi deo content analysis is to be active. Schedules can be defined for weekday s and for[...]

  • Page 71

    IP Camera 200 Series Advance d Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.[...]

  • Page 72

    72 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.5 VCA configuration - Event triggered This configuration allo ws you to stipulate that the video content analysis is only to be activate d when triggered by an event. As long as no trigger is activated, the Silent M[...]

  • Page 73

    IP Camera 200 Series Advance d Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.6.6 Audio Alarm Create alarms based on audi o signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or ba ckground noise, are avoided. Set up normal audio transmiss[...]

  • Page 74

    74 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a vide o receiver. In this case, the camera aut[...]

  • Page 75

    IP Camera 200 Series Advance d Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Destination address Enter the e-mail address for al arm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example, the location of the device. This ma[...]

  • Page 76

    76 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.7 Interfaces 6.7.1 Alarm input Configure the alarm trigger for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by opening the contact. Select N.O. (Normally Open) if the alar m is to be trig[...]

  • Page 77

    IP Camera 200 Series Advance d Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Relay follows If required, select a specific event that will trigger the relay. The following events are possible triggers: – Off : Relay is not triggered by events – Connection : Trigger whenever a connection is m[...]

  • Page 78

    78 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.8 Network 6.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired [...]

  • Page 79

    IP Camera 200 Series Advance d Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway here. Otherwise, this field can remain empty (0.0.0.0). DNS server address The [...]

  • Page 80

    80 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems RCP+ port 1756 Activating RCP+ port 1756 allo ws unencrypted connections on this port. To allow only encrypted connections, se t the Off option to deactivate the port. Telnet su pport Activating Telenet support allo ws [...]

  • Page 81

    IP Camera 200 Series Advance d Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Host name Enter the host name registered on DynDNS.org for the device here. User name Enter the user name registered at DynDNS.org here. Password Enter the password register ed at DynDNS.org here. Force registration no[...]

  • Page 82

    82 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. Click S[...]

  • Page 83

    IP Camera 200 Series Advance d Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to activate UPnP communication.[...]

  • Page 84

    84 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems A special IP address (class D addr ess) must be configured f or multicast operation in a mult icast-enabled network. The network must support group IP addresses and the Internet Group Management Protocol (IGMP V2). The [...]

  • Page 85

    IP Camera 200 Series Advance d Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corr esponds to the highest setting [...]

  • Page 86

    86 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.9 Ser vice 6.9.1 Maintenance Firmware The camera functions and parameters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network. The firmware is[...]

  • Page 87

    IP Camera 200 Series Advance d Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 If the operating status LED lights up red, the upload has failed and must be repeated. To perf orm the upload, switch to a special page: 1. In the address bar of your browser, enter /main.htm after the device IP addres[...]

  • Page 88

    88 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Maintenance log Download an internal maintenanc e log from the device to send it to Customer Service for support purposes. Click Download and select a storage location for the file. Note: Make sure that the HTTPS browse[...]

  • Page 89

    IP Camera 200 Series Operation via the browse r | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 7 Operation via the brow ser 7.1 Liv epage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on th e confi[...]

  • Page 90

    90 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.1.2 Image selection View the image on a full screen. – Click the Stream 1 , Stream 2 or M-JPEG tab below the video image to switch between the differe nt displays for the camera image. Display Stamping [...]

  • Page 91

    IP Camera 200 Series Operation via the browse r | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 7.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed next to the camera image. The alarm symbol is for information and indicates the input status [...]

  • Page 92

    92 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.1.5 Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive.  Click the camera icon to sav[...]

  • Page 93

    IP Camera 200 Series Operation via the browse r | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 All connected users receive audi o signals sent from the camera but only the user who first pressed the F12 key can send audio signals; others must wait for th e first user to release the key.[...]

  • Page 94

    94 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.2 R ecordings page Click Recordings to access the Recordings page from the Livepage or Setti ngs page (the Recordings link is only visible if a storage medium ha s been selected ). Note: Install the BVIP [...]

  • Page 95

    IP Camera 200 Series Operation via the browse r | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 The time bar offers var ious options for navigation in and between sequences. – Change the time interval display ed by clicking the plus or minus icons. The display can span a range from two months to a f[...]

  • Page 96

    96 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems[...]

  • Page 97

    IP Camera 200 Series T r oubleshooting | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 8 T r oubleshooting 8.1 LED indicat ors The camera has LEDs on the front and the rear panel that show the operating status and can indi cate possible malfunctions. Power LED Does not light up: Camera is switched off[...]

  • Page 98

    98 en | T roubleshoot ing IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems version numbers of the firmware and other status information can be seen when the unit starts or by opening the Service menu. Note down this informati on and the information found on the camera label before contacti[...]

  • Page 99

    IP Camera 200 Series Maintenance | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 9 Maintenance 9.1 Repairs 9.1.1 Transfer and disposal The camera should only be passed-on togeth er with this installation guide. The unit co ntains environmentally hazardous materials that must be disposed of according t[...]

  • Page 100

    100 en | Maintenance IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems[...]

  • Page 101

    IP Camera 200 Se ries T echnical Data | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 10 T echnical Data 10.1 Specifications Input voltage +12 VDC or Power-over-Ethernet Power consumption 3.6 W (max) Sensor type ¼-inch CMOS Sensor pixels 1280 x 800 Sensitivity 0.3 lux Video resolution 720p, 4CIF/D1,[...]

  • Page 102

    102 en | T echnical Data IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Recording Continuous record ing, ring recording. alarm/ events/schedule recording Unit Configuration Via web browser or PC surveillance software Protocols HTTP, HTTPs, SSL, TCP, UDP, ICMP, RTSP, RTP, Telnet, IGMPv2/v[...]

  • Page 103

    IP Camera 200 Se ries T echnical Data | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 10.1.1 Dimensions Figure 1 0.1 Dimensions 10.1.2 Accessories LTC 9348/00 Series Indoor Dome – housings for cameras/lens to 216 mm (8.5 in), ceiling mount, tinted, metal backbox UHI-SBG-0 Series Indoor Housing – [...]

  • Page 104

    104 en | T echnical Data IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems[...]

  • Page 105

    [...]

  • Page 106

    Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 201 2[...]