Uniden XCA4500 manuale d’uso

CO NT ENT S Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Included w[...]

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Reviewing Time and Day Stamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Base Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Setting Your Outgoing Message (OGM) . . . . . . . . .[...]

Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cl[...]

12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operat[...]

Introduction Congratulations on your purchase of a Uniden XCA4500 Integrated Telephone Answering Device. Your new telephone answering device is designed to exacting standards to provide reliability, long life, and outstanding performance. Features • 25 44/4 9 MHz Channels • Integrated Answerin g System • Random Code™ Digital Secu rity • A[...]

Included with Your XC A4 500 If any of these items are missing or damaged, do not contact the place of purchase. Instead contact Uniden Customer Service at: (800) 297-1023, 8:00 a.m. to 5:00 p.m., Central, Monday through Friday. Handset Base Unit AC Adapter Long Telephone Cord Rechargeable Handset Battery Short Telephone Cord Operating Guide 9V Bac[...]

Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This unit is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications[...]

Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset or clicking noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lightin g, or electrical storms. Your unit is NOT DEFECTIVE. If these noises continue and are too distrac[...]

Installation Selecting a Location Before choosing a location for your XCA4500 , there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.) • Keep the Base Unit and Handse[...]

Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applying [...]

Installing the Backup Battery In the event of a power outage, your phone has a 9-volt battery backup which can prevent the loss of your messages for up to four hours. 1. Press down and away from the Base to remove the cover. 2. Place the battery in the compartment. Note: Make sure that the positive battery terminal touches the left contact. 3. Repl[...]

Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 2. Plug the AC Adapter into the Base Unit. 3. Place the AC Adapter cord inside the molded channel. PAGE/FIND 12[...]

4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 13[...]

Placement of the Handset The unique design of your phone allows you to place the Handset on the Base Unit either face down or in an upright position. The battery charges in either position. Wall Installation Standard Wall Plate Mounting The XCA4500 is designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug the AC Adapter into the B[...]

2. Place the AC Adapter cord inside the molded channel. 3. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. 4. Place the telephone cord inside the molded channel on the bottom of the Base Unit. Then plug the other end of the telephone cord into the modular jack on the wall. 15[...]

5. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 16[...]

Direct Wall Mounting If you do not have a standard wall plate, you can mount the XCA4500 directly on a wall. Before mounting your integrated telephone answering device, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into th[...]

3. Place the AC Adapter cord inside the molded channel. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 5. Place the cord inside the molded channel on the bottom of the Base Unit. 18[...]

6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 8. Plug the AC Adapter into a standard 120V AC wall outlet. 19[...]

Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall. These steps describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset Retainer on the Base Unit, and slide the tab out. 2. Flip the Retainer over so the tab faces up. 20[...]

3. Put the Retainer back into its slot on the Base Unit. 4. Push down on the Handset Retainer until it snaps into place. 21[...]

S e t t i n gu pY o u rP h o n e Extending the Antenna Before using your phone, be sure to raise its Antenna to the vertical position, and then extend the Antenna. Installing the Handset Battery Pack 1. Press in on the Battery Cover Release. RING SW 2-5-TS PULSE-TONE TEL-LINE DC IN 9V RESET CPC OFF-ON REC TIME ANN-1 RING VOL OFF-LO-HI + - WARNING ![...]

2. Slide the Battery Compartment cover down. 3. Align the plastic connector of the Nickel-Cadmium Battery Pack with its socket and plug it in. Warning: Always install Battery Cable with Black Wire closest to the left. 4. Place the Battery Pack inside the Battery Compartment, and slide the battery cover back on. Note: The built-in Memory Backup feat[...]

Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents. Contacts Contacts (On Bottom) TA LK TAL K REMOTE BA TT LOW ABC JKL GHI TUV PRS TONE MEM INT'C 1 R. TONE 2 R. V[...]

Charging the Handset Battery Pack Initial Battery Charging The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. We recommend that the battery pack charge for approximately 15-20 hours, without interruption, before plugging the phone line into your new phone. 1. Place the Handset on the Base [...]

2. Make sure the CHARGE LED lights. If the LED doesn’t light, check to see that the AC Adapter is plugged in and that the Handset is making good contact with the Base Unit charging contacts. Continuous Battery Charging For the best battery performance, return the Handset to the Base Unit at the end of the day to keep the battery fully charged. Lo[...]

Setting the Pulse/Tone Switch Be sure the PULSE/TONE switch is in the TONE position if you have touch-tone telephone service. Note: Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing. Adjusting Ringer Controls Handset Volume Controls To adjust the ringer volume o[...]

To adjust the receiver volume, press V while you are on a call. Base Volume Controls To adjust the Base Unit ringer volume, move the RING-OFF LO HI switch to the desired setting. To adjust the Base speaker volume, slide the VOLUME control to the desired setting. RDL/P TONE MEM INT'C 1 R. TONE 2 R. VOL CHAN FLASH VOLUME OPR 0 8 ? & Handset [...]

Automatic Digital Code Security Many cordless telephones operate similarly and on the same frequency. Without digital code security, another Handset could make calls using your Base Unit and telephone line. To avoid unauthorized calls on your phone, a Digital Code feature was added to the XCA4500 . This Digital Code is shared only between the Hands[...]

3. The CHARGE LED will blink to indicate that the Digital Security Code is set to one of more than 65,000 codes. If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To establish communication between the Handset and Base Unit: 1. Restore power to the Base [...]

Using Y our Phone Making and Receiving Calls The following features of your XCA4500 phone are different depending on the Handset’s location when you make or receive a call. HANDSET ON BASE HANDSET OFF BASE ANSWER CALL Pick up Handset (AutoTalk). Press T . MAKE CALL 1) Pick up Handset. 2) Press T . 3) Listen for dial tone. 4) Dial the number. 1) P[...]

Changing Channels, Flash, and Page/Find To change channels or access Call Waiting while the phone is in use, or to use the one-way page to locate the Handset, follow these steps: PRESS THESE KEYS YOU WILL HEAR CHANGING CHANNELS Press E . Note: Change channels to help eliminate background noise. A click similar to when F is pressed. There may be a b[...]

Using the Two-Way Intercom The Two-Way Page/Intercom feature allows you to communicate between the Base Unit and the Handset. To use this feature: • The RING ON/BATT SAVE Switch on the Handset must be in the RING ON position. • The BASE UNIT RINGER Switch must be set to either LO or HI . Note: If you are on a call while using the Handset and yo[...]

Paging the Handset : 2,3 2 1,3 1. Press INTERCOM on the Base Unit. Note: If there is no answer, press INTERCOM again to cancel. 2. Press T or J on the Handset to answer the page. The IN USE and TALK/BATT LOW LEDs light. To end the conversation: 3. Press INTERCOM on the Base Unit, or T the Handset. 34[...]

Room Monitor Fe ature Another use of the XCA4500 is to monitor activity near the Base Unit. To turn the monitor on, follow the steps below. 1. Press J on the Handset. 2. Press T on the Handset. Note: Using the Handset, you should now be able to monitor the room where the Base Unit is located. To turn the monitor off: 3. Press T on the Handset. : 2,[...]

Program ming Your P hone All programming functions must be completed when your phone is in the Standby mode. The programming keys will not functi on while you are on the phone. Storing a Number in Memory 1. Remove the Handset from the Base Unit. 2. Press M . The TALK/BATT LOW LED blinks. 3. Enter the number you want to store (up to 16 digits). 5551[...]

4. If a pause is needed during dialing to access a long distance service, press R . 9 R 5 551212 Note: The R button counts as one digit. Pressing R more than once increases the length of the pause between numbers. 5. Press M again. 6. Enter the memory location (0-9). A tone indicates that the number is stored. 3 5 8 6 4 2 1 1 7 ? & REMOTE : : 8[...]

Storing a Mixed Number with a Pulse System If your phone is set up for pulse dialing, you can store a mixed mode number so that you can easily access long distance services. 1. Remove the Handset from the Base Unit. 2. Press M . The TALK/BATT LOW LED blinks. 3. Enter the number to be dialed in pulse mode. 5551212 T ALK TA L K BA TT LOW ABC JKL GHI [...]

4. Press TONE on the Handset. 5. Enter the number to be dialed in Tone mode. 3300 6. If a pause is needed during dialing to access a long distance service, press R . R 3300 Note: The R button counts as one digit. Pressing R more than once increases the length of the pause between numbers. 7. Press M again. 8. Enter the memory location (0-9). A tone[...]

Storing One-Touch Dialing Numbers 1. Remove the Handset from the Base Unit. 2. Press M . The TALK/BATT LOW LED blinks. 3. Enter the number you want to store (up to 16 digits). 5551212 4. If a pause is needed during dialing to access a long distance service, press R . 9 R5551212 Note: The R button counts as one digit. Pressing R more than once incre[...]

6. Now press the One-Touch Dialing button ( 1 or 2 ) you want to program. A tone indicates that the number is stored. Dialing a Stored Number To dial a number previously stored in memory, follow these steps: MEMORY DIALI NG ONE-TOUCH DIALING KEYS Remove the Handset from the Base Unit. Remove the Handset from the Base Unit. Press T . Press T . Press[...]

Erasing a Stored Number To erase a number previously stored in a memory location (0-9) or in One-Touch memory, follow these steps: MEMORY ONE-TOUCH KEYS Remove the Handset from the Base Unit. Remove the Handset from the Base Unit. Press M twice . Press M twice . Press the memory location number (0-9). Press the One-Touch Dialing button you want to [...]

The Integrated Answering System The XCA4500 has a built-in Answering System which answers incoming calls and records your messages. You can also use your new Answering System to record a conversation, leave a memo message for someone else who will use the phone, or to announce a special message when you’ll be away from your phone. Features • Di[...]

Answering System Setup Turning the Answering System On/Off Handset Operation 1. To turn the Answering System ON , press r . The TALK/BATT LOW LED lights orange. The current Time and Day Stamp and number of messages recorded is announced in the Handset receiver. 2. Press 5 You will hear a tone in the Handset followed by the announcement: “Answerin[...]

4. To turn the Answering System OFF , press r . The TALK/BATT LOW LED lights orange. The current Time and Day Stamp and number of messages recorded is announced on the Handset receiver. 5. Press 5 You will hear a tone in the Handset followed by the announcement: “Answering System off.” 6. Press r again to return to Standby. The TALK/BATT LOW LE[...]

Base Operation 1. To turn the Answering System ON , press ANS ON/OFF . A tone sounds, and the current outgoing message plays on the Base Unit speaker. A second tone sounds to indicate the unit is ready to answer calls, and the Message Counter LED turns on. 2. To turn the Answering System OFF , press ANS ON/OFF again. A tone sounds and the Message C[...]

2. Press * Then enter the number which corresponds to the day. 3. Enter the two-digit number for the hour (01-12) and the minute (00-59). 4. To set a.m., press * To set p.m., press # Note: A beep indicates the new time is programmed, and the new Time and Day Stamp is announced in the Handset receiver. 5. Press r to return to Standby. 6. For example[...]

Reviewing Time and Day Stamp Handset Operation 1. Press r to hear the current Time and Day Stamp. The Handset beeps and the Time and Day Stamp is announced, followed by the total number of messages stored in memory. The TALK/BATT LOW LED lights orange. 2. Press 6 to replay the current Time and Day Stamp while using the remote keys . The Handset bee[...]

Base Operation 1. Press STOP . The speaker beeps, and the Time and Day Stamp is announced followed by the remaining recording time available. Setting Your Outgoing Message (OGM) When you receive a call, the Answering System answers and automatically plays either a preset message or your personal OGM . Preset Messages The XCA4500 has two messages pr[...]

Recording Your Personal OGM Handset Operation 1. Press r . The TALK/BATT LOW LED lights orange. 2. Press 7 . Note: You can leave up to a 60-second outgoing message. T ALK TA L K BA TT LO W ABC JKL GHI TUV PRS DEF MNO WXY 1 2 5 4 8 7 3 6 9 3 4 2 1 1 7 a REMO TE 9 T ALK TA L K BA TT LO W ABC JKL GHI TUV PRS DEF MNO WXY 1 2 5 4 8 7 3 6 9 3 4 2 1 1 7 a[...]

3. Press 6 to stop recording. The message replays in the Handset receiver. 4. Press r again to return to Standby. The TALK/BATT LOW LED turns off. T ALK TA L K BA TT LO W ABC JKL GHI TUV PRS DEF MNO WXY 1 2 5 4 8 7 3 6 9 3 4 2 1 1 7 a REMO TE 9 51[...]

Base Operation 1. To record an outgoing message, press and hold the OGM Button. Start recording your message after you hear the long tone and the Message Counter LED begins to count up. 2. Do not get closer than 12 inches from the microphone, and speak clearly while recording your message. When you are finished recording, release the OGM Button. Yo[...]

Selecting a Preset OGM After you have recorded an outgoing message, you can set your Answering System to play either a preset message or your outgoing message. 1. Press OGM . Your recorded outgoing message will begin to play. 2. While your recorded outgoing message is playing, press OGM again. A tone will sound, and you hear the preset message “H[...]

Setting the Calling Party Control Switch The Calling Party Control ( CPC ) switch sets your Answering System to disconnect and reset if the caller hangs up before leaving a message. This prevents your Answering System from using recording time to record a hang up/dial tone message. Note: It is possible that if someone calls while your outgoing mess[...]

Using the Rese t Button The RESET button is used to erase all recorded outgoing messages and any messages which are saved in memory. Pressing RESET does not erase your PIN (Personal Identification Number) code or the security code between the Handset and Base Unit. Note: The RESET button may also be used in the unlikely event that an AC power line [...]

Using Your Answering System Playing New Messages Handset Operation 1. Press r . The current Time and Day Stamp and number of stored messages is announced. 2. Press 8 . The time and day each message was received is announced before the message begins. Note: If you want to stop reviewing your messages, press 6 . 3. A tone sounds when each message end[...]

4. Press r to return to Standby. The TALK/BATT LOW LED goes off. Base Operation 1. Press NEW MESSAGE . The time and day each message was received is announced before the message begins, and the Message Counter LED displays the number of the message playing. Note: If you want to stop reviewing your messages, press the STOP Button. 2. A tone sounds w[...]

3. After the end of message announcement another tone sounds, indicating the system has automatically returned to Standby. The NEW MESSAGE LED stops flashing, indicating that all of the new messages have been reviewed and stored. Playing a Stored Message Handset Operation 1. Press r . 2. Press 2 . The first message stored begins playing. The time a[...]

3. A tone sounds when each message ends. When all messages have played, the announcement “End of messages” plays. 4. Press r to return to Standby. The TALK/BATT LOW LED goes off. Base Operation 1. Press PLAY . The first message stored begins playing. The time and day each message was received is announced before the message begins. The Message [...]

3. After the end of message announcement another tone sounds, indicating the system has automatically returned to Standby. Repeating a Message Handset Operation 1. Press r . 2. Press 2 to review your messages. NEW MESSA GE STOP PLA Y REPEA T ANS ON/OFF OGM MEMO INTERCOM SKIP DELETE Digital Answering System P AGE/FIND 4 T ALK TA L K BA TT LO W ABC J[...]

3. Press 1 at anytime to replay a message. Note: Pressing 1 during a message returns the system to the beginning of that message. Pressing 1 again before the message replays causes the system to scan back one message. If you have several messages, press 1 until you return to the message you want to replay. 4. To return to Standby, press r . The TAL[...]

2. Press REPEAT at any time to replay a message. Note: Pressing REPEAT during a message returns the system to the beginning of that message. Pressing REPEAT again before the message replays causes the system to scan back one message. If you have several messages, press REPEAT until you return to the message you want to replay. 3. Press STOP at any [...]

2. Press 2 to review your messages. 3. Press 3 at any time to skip to the next message. Note: Each time 3 is pressed the system scans forward one message. If you have several messages, press 3 until you get to the message you want to play. 4. To return to Standby, press r . The TALK/BATT LOW LED goes off. T ALK TA L K BA TT LO W ABC JKL GHI TUV PRS[...]

Base Operation 1. Press PLAY to review your messages. 2. Press SKIP at any time to skip to the next message. Note: Each time SKIP is pressed, the system scans foward one message. If you have several messages, press SKIP until you get to the message you want to play. 3. Press STOP at any time to stop reviewing messages and return to Standby. The NEW[...]

Deleting a Message Handset Operation 1. Press r .. 2. Press 2 to review your messages. Note: You can press the 8 Key when you have received new messages. 3. If you decide to delete a message, press 4 any time during the message. The system beeps and immediately goes to the next message. Note: When you press 4, you are tagging the message. A message[...]

4. If you tag a message for deletion and replay the message again before the end-of-message announcement, then the message is untagged and will not be deleted. For example, you have received four messages and you tagged the second message for deletion. During the fourth message you press 1 three times and replay message 2. If you don’t tag messag[...]

6. The warning tones allow you to cancel the delete function and save your messages. Pressing 2 cancels the delete function and the messages begin replaying from the beginning. Pressing either 3 or 1 cancels the delete function. The messages are saved, and you can either select another menu command from the Handset or press r and return to Standby.[...]

2. If you decide to delete a message, press and release DELETE any time during the message. The system beeps and immediately goes to the next message. Note: When you press DELETE you are tagging the message. A message must be tagged before it can be deleted. 3. If you tag a message for deletion and replay the message again before the “End-of-mess[...]

4. When the “End of messages” announcement plays, you will hear a tone and the Message Counter LED will begin to flash a delete warning. A long tone sounds after five seconds on the Base speaker. Then an announcement such as “Two messages deleted" plays. Note: The deletion announcement above depends on how many messages you tag for delet[...]

Pressing either REPEAT or SKIP cancels the delete function, and the messages are saved. Note: If you reviewed all the messages, NEW MESSAGE LED will light but will not flash. Deleting All Messages You can delete all your messages without tagging each separate message. To delete all the messages, you must use the DELETE button on the Base Unit. 1. P[...]

3. A long tone sounds, and then an announcement such as “Four messages deleted” plays. Note: The deletion announcement above depends on how many messages are stored in memory. Message Full Indication The XCA4500 has a maximum record time of 13 minutes and 42 seconds or up to 40 incoming messages. When the memory is full, the Answering System wi[...]

Voice-Guided Help Menu If you are unsure of the commands available while using the Handset, you can use the Voice-Guided Help Menu. The Handset commands are reviewed for you on the Handset Receiver. To access the Help Menu, follow these steps. 1. Press r . The TALK/BATT LOW LED lights orange. 2. Press ? . A tone sounds, and the Voice-Guided Menu be[...]

4. When you exit Help, you will hear a short tone every three seconds, indicating that the system is in the Command Waiting Mode . Press another command, or press r , to return to Standby. Note: You have 20 seconds to enter another command while in the Command Waiting Mode before the system automatically returns to Standby. When you return to Stand[...]

2. You can now listen to the OGM and incoming message on the Handset receiver. If you decide to answer the call, press T . Note: The Answering System stops recording the incoming message when T is pressed. 3. When you finish the call, press T to hang up. The TALK/BATT LOW LED goes off. Leaving a Memo Message You can use the XCA4500A to leave a Memo[...]

2. Speak into the microphone. When you are finished recording, release the MEMO Button. There is a tone, and the NEW MESSAGE LED begins to flash. The Message Counter LED shows the total number of messages stored in memory. 3. After you have recorded your message, the system returns to Standby. Note: If you have new or unplayed messages, the NEW MES[...]

Recording a Telephone Conversation To record a conversation during a call: 1. Press r . The TALK/BATT LOW LED changes from red to orange, and the telephone sounds warning beeps to let the other party know that the call is being recorded. 2. To stop recording, press r again. The TALK/BATT LOW LED changes from orange back to red. Note: A recorded cal[...]

Remote Operation You can operate your XCA4500 while you’re away from home by calling from any touch-tone phone. When using this feature, remember these important guidelines. • You should change your Personal Identification Number ( PIN ) before using your Handset. When you first apply power, the code is set to 00. • The dialing keys on a touc[...]

3. Press your two-digit code. For example, use 22 as the new PIN number. 22 4. Press # again. You will hear a long tone which indicates that the new code is saved. 5. Press r again to return to Standby. TONE OPR 0 8 ? MEM INT'C SCRMBL R. TONE FLASH R. VOL CHAN RDL/P V OLUME T ALK TA L K BA TT LO W ABC JKL GHI TUV PRS DEF MNO WXY 1 2 5 4 8 7 3 [...]

Using a Touch-Tone Phone You can operate your Answering System using any touch-tone telephone. Use this function to check for recorded messages, play or delete messages, or even record a new outgoing message. 1. Call your telephone number. 2. During the OGM playback, press # followed by your PIN number. For example, use 33 as the new PIN number. 3.[...]

5. Use this chart to select the function you want. 6. When you’ve finished, hang up to exit the system. Your Answering System automatically returns to Standby. #1 #2 #3 #4 #5 #6 #7 #8 #9 #0 Repeat Play Skip Delete Message Answer On/Off Stop Record OGM Play Ne w Message Repla y OGM Help Menu Function Press 80[...]

Troubleshooting If your XCA4500A Integrated Telephone Answering Device is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday. Telephone Troubleshooting Chart Problem Suggestion Ch[...]

Answering System Troubleshooting Chart Problem Suggestion Answering System does no t work. • Make sure that the Base Unit is plugged in. • Make sure the Answe ring System is turned on. • Press the RESET button to reset the system after an AC line spike. Answering System does no t answer calls. • Set the REC TIME/ANN-1 switch in the right-ha[...]

Specifications General –T h e XCA4500A complies with FCC Rules, Parts 15 and 68. Frequency Contro l P hase Locked Loop (PLL) Synthesizer Modulation FM Operating Temp erature –1 0 ° to 50 ° C Base Unit Receive Frequency 48.76 to 49.99 MHz (25 Channels) Transmit Frequency 43.72 to 46.97 MHz (25 Channels) Power Requirements 120V AC 60 Hz Size 8 [...]

XCA4500 Integrated Telephone Answering Device UDZZ01355ZZ Operating Guide ® Q :[...]

PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden America Corporatio n DOES NOT represent this unit to be waterproof. To reduce the risk of fire, elect rical shock, or damage to the unit, DO NOT expose this unit to rain or moistur e. RECHARGEABL E NICKEL-CADMIUM BATTERY WARNING This equipment contains a Rechar[...]

Answering Device Remote Keys T ALK TA L K B A TT LO W ABC JKL GHI TUV PRS T ONE MEM INT'C 1 R. T ONE 2 R. V OL CHAN RDL/P V OLUME OPR DEF MNO WXY 1 2 5 4 8 0 7 3 6 9 3 8 6 4 2 1 1 7 ? & 1 5 6 8 9 11 12 4 7 10 23 : REMO TE 9 1. Repeat Key 1 2. Play Key 2 3. Skip Key 3 4. Message Delete Key 4 5. Answering System On/Off Key 5 6. Stop Key 6 7.[...]

Handset Controls and Keys 2 3 5 6 9 13 14 11 12 10 8 7 4 1 RING ON BA T T SA VE T ALK T ALK REMOTE BA TT LOW ABC JKL GHI TUV PRS TONE MEM 1 2 INT'C R. TONE R. V OL CHAN RDL/P FLASH VOLUME OPR DEF MNO WXY 1 2 5 4 8 0 7 3 6 9 3 a 8 6 4 2 1 1 7 ? 9 1. Antenna 2. Talk/Battery Low Indicator 3. Talk Button T 4. Numeric Keypad 5. Tone Button * 6. Mem[...]

Base Unit Controls and Keys 2 1 26 3 4 5 8 67 9 11 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Extend A Phone •• H Q SERIES H Q SERIES RING SW 2-5-TS PULSE-TONE TEL-LINE DC IN 9V RESET CPC OFF-ON REC TIME ANN-1 RING VOL OFF-LO-HI + - IN USE BA TTERY PO WER NEW MESSAGE STOP PLA Y REPEA T ANS ON/OFF OGM MEMO INTERCOM SKIP DELETE CHARGE CHANNEL U[...]

One Year Limited Warr anty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERI CA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY : Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the li mitations or exclu[...]

©1995 Uniden America Corporation. All rights reserved. Printed in Hong Kong Cov ered under one or more of the following U .S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 ®[...]