Sony HDC-930 manuale d’uso

HD COLOR CAMERA HDC-900 HDC-900/L HDC-910 HDC-910/L HDC-930 HDC-950 HD CCD BLOCK ADAPTOR HKC-T950 INST ALLA TION AND MAINTENANCE MANUAL 1st Edition (Revised 7)[...]

HDC-900/950 IMM ! W ARNING This manual is intended f or qualified service personnel only . T o reduce the risk of electr ic shoc k, fire or injur y , do not perf or m any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. ! W ARNUNG Die Anleitung i[...]

HDC-900/950 IMM 1 (P) CA UTION Danger of e xplosion if batter y is incorrectly replaced. Replace only with the same or equiv alent type recommended by the man ufacturer . Dispose of used batteries according to the manuf acturer ’ s instructions. V orsicht! Explosionsgefahr bei unsachgem äß em A ustausch der Batterie. Ersatz nur durch denselben [...]

HDC-900/950 IMM For the customers in Japan For the customers in the Netherlands Voor de klanten in Nederland Hoe u de batterijen moet verwijderen, leest u in de Onderhoudshandleiding. Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). Für Kunden in Deutschland Entsorgungshinweis: Bitte werf en Sie nur entladene Batterien [...]

1 (E) HDC-900/950 IMM Table of Contents Manual Structure Purpose of this manual ........................................................................................ 3 (E) Related manuals ................................................................................................... 3 (E) Contents ............................................[...]

2 (E) HDC-900/950 IMM 3. Setup Menu 3-1. Setup Menu ........................................................................................... 3-1 (E) 3-2. TOP Menu ............................................................................................. 3-4 (E) 3-3. OPERATION Menu ..............................................................[...]

3 (E) HDC-900/950 IMM Manual Structure Purpose of this manual This manual is the installation and maintenance manual of HD Color Camera HDC- 900/910/950/930 and HD CCD Block Adaptor HKC-T950 for HDC-950/930. This manual is intended for use by trained system and service engineers, and is provided information required for the installation and mainten[...]

4 (E) HDC-900/950 IMM . . . . . “ Semiconductor Pin Assignments ” CD-ROM (Available on request) This “Semiconductor Pin Assignments” CD-ROM allows you to search for semiconductors used in B&P Company equipment. Semiconductors that cannot be searched for on this CD-ROM are listed in the maintenance manual for the corresponding unit. The [...]

1-1 (E) HDC-900/950 IMM Section 1 Installation Overview 1-1. Checking before Installation 1-1-1. Checking the ROM and Software Version When connecting the peripheral equipment in the list below to HDC-900/910/950/ 930, be sure to check that the ROM and software version on each peripheral device is corresponding to the camera to be connected. When t[...]

1-2 (E) HDC-900/950 IMM 1 1 1 1 ! !/ 6 4 3 9 !, 7 8 5! ] ! [ != 1 !; !- !- 1-2. Connectors and Cables 1-2-1. Connector Input/Output Signals HDC-900/910 Connector Layout 1-2. Connectors and Cables[...]

1-3 (E) HDC-900/950 IMM !. !; 8 !, 2 4 !/ !- !] 5 3 6! 9 7 1 !' ![ * @[ @- @= @/ ! @ @- @[ @= @] HDC-950/930 Connector Layout * : Use 4 connector by selecting PROMPTER OUT, GENLOCK IN and RET IN signals with the switch. PROMPTER OUT signal become effective when the camera is connected to CCU. GENLOCK IN and RET IN signals become effective [...]

1-4 (E) HDC-900/950 IMM 1 2 3 4 7 7 7 7 7 RET CONTROL (6P FEMALE) (External view) No. Signal I/O Specifications 1 INCOM 1 IN Zi > 10 k Z MIC ON/OFF ON : GND OFF : OPEN 2 INCOM 2 IN Zi > 10 k Z MIC ON/OFF ON : GND OFF : OPEN 3 GND —— 4 NC No connection 5 RET 1 ON/OFF IN Zi > 10 k Z ON : GND OFF : OPEN 6 RET 2 ON/OFF IN Zi > 10 k Z ON[...]

1-5 (E) HDC-900/950 IMM HDC-900/910 (CE) only E E L L N N 21 3 9 9 9 9 9 REMOTE (8P FEMALE) (External view) No. Signal I/O Specifications 1 TX ( + ) HDC SERIAL DATA 2 TX ( _ ) 3 RX ( + ) HDCU/MSU/RCP/CNU/VCS 4 RX ( _ ) SERIAL DATA 5 TX GND —— GND for TX 6 POWER ( + ) OUT + 26 V, 200 mA (max) 7 POWER GND —— GND for POWER ( + ) 8 VIDEO (X) 75[...]

1-6 (E) HDC-900/950 IMM B A 5 6 3 4 1 2 10 11 8 9 7 15 16 13 14 12 20 21 18 19 22 23 24 17 B A 5 6 3 4 1 2 10 11 8 9 7 15 16 13 14 12 20 21 18 19 22 23 24 17 !] !] !] !] !] VTR (26P MALE) (HDC-900/910) (External view) No. Signal I/O Specifications A NC No connection B VTR CMD GND —— GND for VTR CMD 1 GENLOCK IN Sync 0.6 V p-p, 0 V dc, Zi = 75 Z[...]

1-7 (E) HDC-900/950 IMM 18 36 1 19 ! ! ! ! ! LENS (36P FEMALE) (HDC-900/910) (External view) No. Signal I/O Specifications 23 RET 3 ON IN Zi > 10 k Z ON : GND OFF : High impedance 24 LENS ADRS 0 IN * 1 25 LENS ADRS 1 IN * 1 26 LENS ADRS 2 IN * 1 27 LENS ADRS 3 IN * 1 28 EXTENDER 1 OUT ON : GND ON OFF : High impedance 29 EXTENDER 2 OUT ON : [...]

1-8 (E) HDC-900/950 IMM ! ! ! ! ! LENS (12P FEMALE) (HDC-950/930, HKC-T950) (External view) No. Signal I/O Specifications 1 RET VIDEO IN ENABLE : 0 V ENABLE DISABLE : + 5 V or OPEN 2 VTR START IN ENABLE : 0 V /STOP DISABLE : + 5 V or OPEN 3 GND —— GND for UNREG 4 AUTO SERVO OUT AUTO : + 5 V MANU : 0 V or OPEN 5 IRIS CONT OUT + 3.4 V (F16) [...]

1-9 (E) HDC-900/950 IMM 1 5 10 11 16 17 18 19 20 2 3 4 !; !; !; !; !; VF (20P FEMALE) (HDC-950/930) (External view) No. Signal I/O Specifications 1 S-DA TA IN/OUT TTL level 2 NC No connection 3 NC No connection 4 SCK OUT TTL level 5 NC No connection 6 NC No connection 7 NC No connection 8 G TALLY OUT ON : 5 V OFF : GND 9 NC No connection 10 NC No c[...]

1-10 (E) HDC-900/950 IMM 5 1 2 6 11 16 3 7 12 17 4 8 13 9 14 18 20 19 15 10 !, !, !, !, !, TRACKER (FEMALE) (External view) No. Signal I/O Specifications 1 TRK R (X) OUT TRACKER RECEIVE 0 dBu unbalanced 2 TRK R (G) —— GND for TRACKER R 3 GND —— GND for UNREG/TALLY (UNREG/TALLY) 4 R TALLY OUT ON : 5 V (Open Collector) OFF : 0 V (Open Collect[...]

1-11 (E) HDC-900/950 IMM 12345 6789 1 0 11 12 13 14 15 16 17 18 19 20 1-2. Connectors and Cables @[ @[ @[ @[ @[ VF (HKC-T950) (20P FEMALE) (External view) No. Signal I/O Specifications 1 S DATA IN/OUT TTL level 2 NC No connection 3 NC No connection 4 SCK OUT TTL level MANU : 0 V or OPEN 5 NC No connection 6 NC No connection 7 NC No connection 8 G T[...]

1-12 (E) HDC-900/950 IMM 1-2. Connectors and Cables @] @] @] @] @] CAM BODY (HKC-T950) (26P MALE) (External view) No. Signal I/O Specifications A UNREG IN 13 V to 17 V B UNREG GND —— GND for UNREG 1 OHB H OUT 0.3 V p-p Positive pulse 2 OHB H (G) —— GND for OHB H 3 G VIDEO (G) —— GND for G VIDEO 4 G VIDEO (X) OUT 300 mV p-p, Zo = 75 Z (1[...]

1-13 (E) HDC-900/950 IMM Yellow Black White Red Red White Blue Red White Orange White Red Yellow White Black Blue Red Brown Gray Red 1-2-2. Wiring Diagrams for Cables CCA-5 Cable HDCZ Cable 1-2. Connectors and Cables[...]

1-14 (E) HDC-900/950 IMM 1-2-3. Connection Connectors/Cables Connection made with the connector panels during instal- lation or service, should be made with the connectors/ complete cable assemblies specified in the following list, or equivalent parts. Indication Connection connector/cable TEST OUT 1-569-370-12 Plug, BNC PROMPTER SERIAL OUT VIDEO O[...]

1-15 (E) HDC-900/950 IMM RE-181 DU-104 AU-271 DAP-24 VDA-55 IF-784 SW-1045 AT-130 CN-2017 DAD-37 DPR-154 DPR-156 VA-196 CN-1998 CN-2074 RX-28 CN-2016 SW-1019 CN-2073 CN-2015 CN-1956 CN-1974 CN-1702 SG-268 SDI-49 LE-172 AT-131 PS-582 SW-1020 MB-883 RE-182 RE-184 CN-986 RP-114 TG-214 DU-69 SERVO DRIVER NR-69/73 DR-412 CN-1947 CN-1961 PA-239 BI-145 BI[...]

1-16 (E) HDC-900/950 IMM DAD-37 DPR-154 VA-196 CN-1964 SW-1027 CN-1955 CN-1951 CN-2063 MB-882 SDI-49 VDA-55 SG-268 DAP-24 RE-181 AU-271 AT-130 SW-1017 SW-1013 SW-1015 SW-1014 DPR-156 RE-188 LP-113 RX-28 SW-1016 SW-1018 DU-104 RE-184 RE-182 CN-2094 CN-1702B CN-1702B CN-1952 CN-1954 CN-2018 CN-1953 SW-1029 CN-2026 RP-114 TG-214 BI-145 NR-69/73 DR-412[...]

1-17 (E) HDC-900/950 IMM HKC-T950 1-3. Location of Printed Circuit Boards SW-1065 SW-1066 IF-845 AT-146 LE-256 CN-2270 CN-2271 CN-2202 RE-202 CN-2265 IF-846 CN-2264 CN-2203 SW-1076 AT-147[...]

1-18 (E) HDC-900/950 IMM 1-4. Opening/Closing the Side Panel HDC-900/910 1. Unscrew the two lock screws of the side panel. 2. While sliding the safety lock toward the lens, open the side panel by holding the handle. 3. Close the side panel and tighten securely the lock screws of the side panel. [Reference] [Reference] [Reference] [Reference] [Refer[...]

1-19 (E) HDC-900/950 IMM S104 S103 S1 S101 AU-271 board (A side) S102 S201 S2 S202 S301 S304 S203 S204 S303 B C D E F G A 54 3 2 1 AU CM DYN INCOM 1 INCOM 1 switch INCOM 1 MIC GAIN switch MIC GAIN DYN INCOM 2 MIC GAIN MIC MONITOR ON + 0 _ + 0 _ OFF INCOM 2 switch INCOM 2 MIC GAIN switch MIC MONITOR switch AU-271 board suffix -13 and higher (B side)[...]

1-20 (E) HDC-900/950 IMM 1-5. Switch Setting on the Boards Ref. No. Name Contents Factory Setting S103 INCOM1 MIC GAIN + /0/ _ Select the audio level of INTERCOM1/2 to be sent to CCU. 0 + : + 6dB 0 : 0dB _ : _ 6dB S104 INCOM1 MIC TYPE Select from two options below in accordance with the microphone CM of the head set connected to the INTERCOM1/2 con[...]

1-21 (E) HDC-900/950 IMM 1-5. Switch Setting on the Boards * 1: The Tracker connector communicates to INCOM1 at the standard setting, yet it is communicable to INCOM2 by setting S1-1, S301-1 and S301-4 to ON. * 2: When setting S2-1 or S2-2 to ON, set bit1 and bit2 of S101, S102, S201 and S202 as shown below to prevent PGM1 and PGM2 signals from bei[...]

1-22 (E) HDC-900/950 IMM DU-104 board [Reference] [Reference] [Reference] [Reference] [Reference] The switch setting on this board is valid only when connecting the RTS kit (optional) to the INTERCOM2 connector. Ref. No. Name Contents Factory Setting S1 RTS1 RTS 1/NORM/POW Selects the function of the RTS CH1 side. NORM RTS 1 : RTS CH1 of the RTS ki[...]

1-23 (E) HDC-900/950 IMM Switch Settings Setup Menu S100-1 S100-2 S100-3 S100-4 USER * * * * * USER MENU * * * * * OPERATION PAINT MAINTENANCE FILE DIAGNOSIS CUSTOMIZE OFF OFF OFF OFF Yes Yes Yes Yes Yes Yes Yes ON OFF OFF OFF Yes Yes Yes Yes Yes No Yes OFF ON OFF OFF Yes Yes Yes Yes No No Yes ON ON OFF OFF Yes Yes Yes No No No Yes OFF OFF ON OFF Y[...]

1-24 (E) HDC-900/950 IMM PRESET AC OUT 200VA MAX VTR DC IN AC100V PRESET AC100V PRESET AC120V PRESET AC220V~ PRESET AC230V~ PRESET AC240V~ Voltage indication seal HDC-900/910 (CE) only PRESET AC100V 1-6. Setting the Utility Out Voltage (HDC-900/910) Set the utility out voltage in accordance with the voltage of peripheral devices when they are conne[...]

1-25 (E) HDC-900/950 IMM Screw (B4 x 20) Screws (B3 x 6) Screws (B3 x 8) Pad spacer Shoulder pat assembly 1-7. Adjusting the Position of the Shoulder Pad (HDC-950/930) The shoulder pad is factory-configured to the more for- ward position considering the mass of the camera, yet it is adjustable according to the type of the lens by following the proc[...]

1-26 (E) HDC-900/950 IMM Flexible card wire Blank panel Incom panel assembly Screws Screws Screws Screws CN1 Blank panel Screws Screws Screws Screws Blank panel 1-8. Installing the Incom Panel Assembly to the Camera Backside (HDC-950/930) n When disconnecting/connecting a flexible card wire, refer to Section 1-10. 1. Unscrew the four screws to the [...]

1-27 (E) HDC-900/950 IMM 1-10. Disconnecting/Reconnecting Flexible Card Wire m . Be sure to turn off the power when disconnecting and connecting the flexible card wire. To power off, be sure to disconnect the cable connected to the DC IN connector or the battery, in addition to turning off the power switch. . The holded flexible card wire remarkabl[...]

1-28 (E) HDC-900/950 IMM AU-271 board suffix -13 and higher (B side) R271 1 A B C D E F G 2345 1-11. Notes on Use of the RTS Kit 1-11. Notes on Use of the RTS Kit Connecting the RTS Intercom System Kit BKP-7913 (option) to the INTERCOM 2 connector of HDC-900/910/ 950/930 allows the INTERCOM 2 connector to work with an RTS intercom system, and be co[...]

2-1 (E) HDC-900/950 IMM Optical contacts (white) Insert the shorter nose end Shock absorber portion Handle 2-1. Cleaning of Connector/Cable It is recommendable to clean the optical contact portions mentioned below before connecting this unit to the camera control unit. . CCU connector of this unit . Camera connector of the camera control unit . Opt[...]

2-2 (E) HDC-900/950 IMM Optical contacts (white) Alignment sleeve 2. When the turn stops, pull out the remover in the straight line forcedly. n The alignment sleeve can be removed/reinstalled with the sleeve itself attached to the tip of the remover. Great care should be taken so as not to lose or damage the alignment sleeve. (Alignment sleeve: Son[...]

2-3 (E) HDC-900/950 IMM Precision P2.6 x 5 Precision P2.6 x 5 Precision P2.6 x 5 Top chassis cover assembly Fan grill holder Fan grill Precision P2.6 x 5 2-2. Cleaning the Vent Portion of the Fan (HDC-950/930 only) A part for preventing from dust is attached in the vent portion of the fan. Clean this component every two or three months. Clogging ma[...]

2-4 (E) HDC-900/950 IMM 2-3. Replacing the Fuse w The fuse is critical for safely operating. Do exchange with the fuses authorized by the manufacturer, otherwise a fire and electric shock may occur. 2-3-1. HDC-900/910 In the power supply portion of the HDC-900/910, fuses for protecting from the overcurrent are mounted on each circuit and each block[...]

2-5 (E) HDC-900/950 IMM 2-4. Recommended Replacing Parts No. Description Sony Part No. 1 KNOB (DIA 3) ASSY, VOLUME X-3167-563-X 2 KNOB, VOLUME (DIA 6) 3-185-872-0X 3 KNOB, VOLUME 6 3-602-483-0X 4 SHIELD CUSHION (C) 3-615-750-6X 5 BAND, CLAMP 3-612-712-0X 6 PACKING, FAN 3-627-260-0X 7 FILTER UNIT, OPTICAL 1-758-483-11 (HDC-900) 1-758-778-11 (HDC-910[...]

2-6 (E) HDC-900/950 IMM 3 1 !/ ![ 9 != !- 4 8 1 2 7 5 6 1 No. Description Sony Part No. 5 CAP, CONNECTOR (CCZ) 3-612-791-0X 6 CAP, TRK 3-626-974-0X 7 CUSHION, FAN 3-627-210-0X 8 BUSHING, RUBBER 3-627-968-0X 9 PAD ASSY, SHOULDER A-8279-359-X !/ BUTTON, VTR START 3-679-668-0X !- FILTER UNIT, OPTICAL 1-758-483-11 (HDC-950) 1-758-778-11 (HDC-930) != PA[...]

2-7 (E) HDC-900/950 IMM 2-4. Recommended Replacing Parts 2-4-3. HKC-T950 Following parts are recommended replacing parts. Besides, the parts made of rubber used for this adaptor may become cracked and split with the lapse of time, therefore also replace it if necessary. No Description Sony Part No. 1 COVER, SWITCH 3-676-244-0X 2 SHEET, HANDLE 3-626[...]

[...]

3-1 (E) HDC-900/950 IMM 3-1. Setup Menu The setup menu is used for selecting various setting values, items displayed on the viewfinder screen, the method of displaying, and adjustments. The menu is displayed on the viewfinder screen. The menu can also be displayed by connecting an external monitor to the TEST OUT connector. Structure of Setup Menu [...]

3-2 (E) HDC-900/950 IMM 3-1. Setup Menu Switches (HDC-900/910) DISPLAY switch ON : Displays characters and messages indicating the settings and operating status of the unit on the viewfinder screen. OFF : Turns off all the displays on the viewfinder screen. MENU : Displays the setup menu on the viewfinder screen. MENU SELECT control Selects the ite[...]

3-3 (E) HDC-900/950 IMM 3-1. Setup Menu DISPLAY switch MENU switch Rotary Encoder Switches (HDC-950/930) DISPLAY switch ON : Displays characters and messages indicating the settings and operating status of the unit on the viewfinder screen. OFF : Turns off all the displays on the viewfinder screen. MENU : Displays the setup menu on the viewfinder s[...]

3-4 (E) HDC-900/950 IMM 3-2. TOP Menu 3-2. TOP Menu The TOP menu is provided for indicating the whole configuration of the menu items. Displaying the TOP menu HDC-900/910 : Set the DISPLAY switch from “OFF” to “MENU” while pressing the MENU SELECT switch toward the “ENTER” side. HDC-950/930 : Set the DISPLAY switch from “OFF” to “[...]

3-5 (E) HDC-900/950 IMM 3-3. OPERATION Menu The OPERATION menu consists of the items that a camera operator can set when using this camera, such as VF screen display setting. For details, refer to the operation manual supplied with this unit. VF DISPLAY page Item Setting Initial values EX 3S, ON, OFF ON ZOOM 3S, ON, OFF OFF FOCUS 3S, ON, OFF OFF ND[...]

3-6 (E) HDC-900/950 IMM AUTO IRIS page Item Setting Initial values WINDOW 1, 2, 3, 4, 5, 6 1 OVERRIDE _ 99 to 99 0 BATT ALARM page Item Setting Description DC IN LITHIUM, DIGITAL, AC ADP TYPE c) OTHERS1, OTHERS2, AC ADP BEFORE END d) _ END d) _ c) Setting of this item is disabled in HDC-900/910. When HKC-T950 is used, select OTHERS1. d) When HKC-T9[...]

3-7 (E) HDC-900/950 IMM 3-4. PAINT Menu The PAINT menu contains overall general paint adjustment items, such as white adjustment. For details, refer to the operation manual supplied with this unit. SW STATUS page Item Setting Description FLARE ON, OFF Sets the flare correction circuit to ON or OFF. GAMMA ON, OFF Sets the gamma correction function t[...]

3-8 (E) HDC-900/950 IMM VIDEO LEVEL page Item Setting Description WHITE _ 99 to 99 Adjusts the white level of R, G, B. BLACK _ 99 to 99 Adjusts the black level of R, G, B and master. FLARE _ 99 to 99 Adjusts the flare level of R, G, B and master. GAMMA _ 99 to 99 Adjusts the gamma correction curve of the R, G, B and master. V MOD _ 99 to 99 Adjusts[...]

3-9 (E) HDC-900/950 IMM GAMMA page Item Setting Description LEVEL _ 99 to 99 Adjusts the gamma correction curve of the R, G, B and master. COARSE 0.35 to 0.90 Sets the correction curve of the master gamma in 0.05 steps. TABLE STANDARD, Selects the gamma table. USER * STANDARD : Select the standard gamma table which comes standard on the unit. USER [...]

3-10 (E) HDC-900/950 IMM BLK GAMMA page Item Setting Description RGB LEVEL _ 99 to 99 Adjusts the black gamma of the R, G, B and master. RGB RANGE 1, 2, 3, 4 Sets the upper limit of the video level which the RGB black gamma affects. ON, OFF Sets the RGB black gamma correction function to ON or OFF. Y LEVEL _ 99 to 99 Adjusts the Y black gamma to ad[...]

3-11 (E) HDC-900/950 IMM SATURATION page (Displays ROM Version 1.30 or higher) Item Setting Description SATURATION a) _ 99 to 99 Sets the saturation. ON, OFF Sets the saturation function to ON or OFF. LOW KEY SAT _ 99 to 99 Sets the saturation of the dark part. RANGE LOW, L MID, H MID, Sets the upper limit of the video level which the low key satur[...]

3-12 (E) HDC-900/950 IMM (Display is initial values.) <KNEE> [R] [G] [B] [M] POINT : 0 0 0 0 SLOPE : 0 0 0 0 WHT CLP: 0 0 0 0 KNEE SAT LEVEL 0 KNEE : ON KNEE SAT: OFF WHT CLIP: ON TEST : OFF <KNEE> [R] [G] [B] [M] POINT : 0 0 0 0 SLOPE : 0 0 0 0 WHT CLP: 0 0 0 0 KNEE : ON WHT CLIP : ON AUTO KNEE : OFF KNEE SAT : 0 : OFF TEST : OFF ROM V[...]

3-13 (E) HDC-900/950 IMM <DETAIL 1> [M] [WHT][BLK] LEVEL : 0 LIMITER : 0 0 0 CRISPEN : 0 HV RATIO : 0 FREQ : 0 LVL DEP : 0 DETAIL : ON LVL DEP : ON (Display is initial values.) DETAIL 1 page Item Setting Description LEVEL _ 99 to 99 Sets the general level of the detail signal. LIMITER _ 99 to 99 Sets the level for clipping the excessive detai[...]

3-14 (E) HDC-900/950 IMM SKIN DETAIL page Item Setting Description SKIN DTL ON, OFF When this setting is ON, the setting [1] of the channel 1 is always set ON. Sets the skin detail function to ON or OFF. SKIN GATE b) ON, OFF Sets the zebra indication of the skin tone detail portion to ON or OFF. CH SW ON, OFF Sets each channel of the skin detail fu[...]

3-15 (E) HDC-900/950 IMM USER MATRIX page Item Setting Description R-G, R-B, _ 99 to 99 Sets the linear matrix coefficient for each R-G, R-B, G-R, G-B, B-R, G-R, G-B, _ 99 to 99 and B-G. B-R, B-G, _ 99 to 99 MATRIX a) ON, OFF Sets the linear matrix correction function to ON or OFF. PRESET a) ON, OFF Sets the linear matrix correction coefficient set[...]

3-16 (E) HDC-900/950 IMM MULTI MATRIX page Item Setting Description PHASE 0, 23, 45, 68, 90, Sets the angle that varies the multi matrix correction function. 113, 135, 158, 180, (sixteen-axis mode) 203, 225, 248, 270, 293, 315, 338 HUE _ 99 to 99 Adjusts the color phase the multi matrix correction function affects in every sixteen-axis mode. SAT _ [...]

3-17 (E) HDC-900/950 IMM SHUTTER page Item Setting Description SHUTTER ON, OFF Sets the shutter/ECS mode to ON or OFF. Table below a) Sets the shutter speed. (The selectable shutter speed varies with each format.) ECS FREQ Table below b) Sets the ECS frequency. (The selectable ECS frequency variable region varies with each format.) S-EVS ON, OFF Se[...]

3-18 (E) HDC-900/950 IMM SCENE FILE page Item Setting Description 1, 2, 3, 4, 5 Saves and calls the scene file (the data painted in accordance with the shooting scene.) (Same as the SCENE FILE page in the FILE menu.) STORE STANDARD Returns the current paint adjustment amount and switch settings to the reference values. READ (MS → CAM) Reads out f[...]

3-19 (E) HDC-900/950 IMM 3-5. MAINTENANCE Menu This menu consists of paint items used less frequently such as shading adjustment and items required for the camera maintenance such as system change. AUTO SETUP page Item Setting Description AUTO BLACK * 1 Starts the automatic black balance adjustment. (Pressing the rotary encoder during the execution[...]

3-20 (E) HDC-900/950 IMM BLACK SHADING page Item Setting Description V SAW R/G/B _ 9 9 to 99 Adjusts the black shading V SAW correction amount of the R,G,B master. V PARA R/G/B _ 99 to 99 Adjusts the black shading V PARA correction amount of R,G,B. H SAW R/G/B _ 99 to 99 Adjusts the black shading H SAW correction amount of R,G,B. H PARA R/G/B _ 99 [...]

3-21 (E) HDC-900/950 IMM AUTO IRIS page Item Setting Description AUTO IRIS b) ON, OFF Sets the auto iris function to ON to OFF. WINDOW 1, 2, 3, 4, 5, 6 Selects the auto iris window. a) OVERRIDE _ 99 to 99 Sets the reference value of the auto iris level by ± 2 focus. _ 99 (2 iris nearly closed) ↔ 99 (2 iris nearly open) IRIS LEVEL _ 99 to 99 Sets[...]

3-22 (E) HDC-900/950 IMM <SDI> PROMPTER : OFF BNC SDI OUT: OFF <OUT PUT> PROMPTER : OFF BNC SDI OUT: OFF LINER EXP : OFF (Display is initial values.) ROM Version lower than 1.30 ROM Version 1.30 or higher MULTI FORMAT page Item Setting Description CURRENT Displays the format being currently selected. The currently selected format is hig[...]

3-23 (E) HDC-900/950 IMM VTR 26PIN page Item Setting Description CABLE COMP OFF, 25 m, 50 m Selects the VTR (26P) cable compensation VIDEO SEL MAIN (RGB), Selects the video signal to be output to the VTR (26 p) OUT connector. MAIN (YPbPr), RET (YPbPr) outputs the return video signal input from the camera RET (YPbPr) a) control unit. G _ 30 to 30 Co[...]

3-24 (E) HDC-900/950 IMM OTHERS1 page Item Setting Description FAN MODE AUTO1, Sets the fan mode. AUTO2, AUTO1 : normal mode MIN, MAX AUTO2 : silent mode MIN : minimum rotation mode MAX : maximum rotation mode H PHASE _ 3072 to 1023 Adjusts the H phase. CHU BARS ON, OFF Sets the CHU BARS to ON or OFF. 3-5. MAINTENANCE Menu <OTHERS 1> FAN MODE[...]

3-25 (E) HDC-900/950 IMM 3-5. MAINTENANCE Menu OTHERS2 page Item Setting Description MENU RESUME OPE MENU, Sets the menu screen displayed when starting the menu. OFF, ALL OPE MENU : Starts to display from the page in the operation menu, which was displayed at powering off of the previous time. OFF : Starts to display from the first page (VF DISPLAY[...]

3-26 (E) HDC-900/950 IMM 3-5. MAINTENANCE Menu T ADP ADJ page (Displays ROM Version 1.20 or higher) Item Setting Description VSAW OFST _ 50 ~ + 50, - - - Adjusts V SAW correction amount when HKC-T950 is connected. When HKC-T950 is not connected, this setting is disable, “ - - - ” is displayed showing invalid. CABLE 10M, 25M, 50M Displays the ca[...]

3-27 (E) HDC-900/950 IMM <OPERATOR FILE> READ (MS CAM) WRITE(CAM MS) PRESET STORE PRESET FILE FILE ID: CAM CODE DATE 3-6. FILE Menu File menu is used to operate the file such as saving the reference file. OPERATOR FILE page Item Setting Description READ * 1 Reads the operator file from the memory stick. (MS → CAM) WRITE * 1 Saves the operat[...]

3-28 (E) HDC-900/950 IMM 3-6. FILE Menu SCENE FILE page Item Setting Description 1, 2, 3, 4, 5 Saves and calls the scene file (the data painted in accordance with the shooting scene.) (Same as the SCENE FILE page in the PAINT menu.) STORE STANDARD Returns the current paint adjustment amount and switch settings to the reference values. READ (MS → [...]

3-29 (E) HDC-900/950 IMM REFERENCE page Item Setting Description STORE FILE * 1 Registers the adjustment values of each item as the reference file. STANDARD * 1 Returns the data registered in the reference file to the reference value. READ (MS → CAM) Reads out reference file from the memory stick to the memory of camera unit. WRITE (CAM → MS) W[...]

3-30 (E) HDC-900/950 IMM LENS FILE page Item Setting Description STORE FILE * 1 Registers the adjustment values for each item (exc. the center marker position) as the lens file. No. 1to 16 Selects the file matching with the mounted lens from the sixteen lens files NAME Displays the lens file name in accordance with the No. (1 to 16) selected. F NO [...]

3-31 (E) HDC-900/950 IMM 3-6. FILE Menu FILE CLEAR page Item Setting Description PRESET * 1 Returns the preset value of the operator file set by the user to the OPERATOR original value at factory setting. REFERENCE (ALL) * 1 Returns each adjustment value registered in the reference file to the original values at factory setting. 10 SEC CLEAR ON, OF[...]

3-32 (E) HDC-900/950 IMM 3-7. DIAGNOSIS Menu 3-7. DIAGNOSIS Menu The DIAGNOSIS menu displays the self-diagnosis of every plug-in board and photo-receptive condition of the optical connector, etc. SDI page Item Setting Description OPTICAL LEVEL GREEN, Displays a photo-receptive condition of the optical connector YELLOW, GREEN : Normal ( _ 17 dBm * o[...]

3-33 (E) HDC-900/950 IMM <BOARD STATUS> ROM:V1.00 OHB :OK SG :OK VA :OK AT :OK DPR :OK AU :OK VDA :OK RE :OK DAD :OK PS :OK SDI :OK DAP :OK BOARD STATUS page Item Setting Description ROM Indicates the ROM version for IC1/AT-130 board OHB OK, NG Displays the self-diagnosis status of the CCD block. b) VA OK, NG Displays the self-diagnosis statu[...]

[...]

HDC-900/950 IMM 4-1 (E) Section 4 File System The HDC-900/910/950/930 are equipped with various file systems for managing data. 4-1. File Structure The following six types of files are available. 1. Operator File Stores the items displayed on the viewfinder and switch settings for camera operator. This file is stored in the memory stick, yet the vi[...]

4-2 (E) HDC-900/950 IMM Camera unit Preset storing (Step 4) Storing (Step 1) Reading (Step 2) Preset initialization (Step 5) Preset reading (Step 3) Current Operator File Data Output to hardware Memory stick Preset Operator File Preset factory-set value Fig. 4-2. Operating Procedure for Operator Files 4-2. Operator File 4-2. Operator File Data is s[...]

HDC-900/950 IMM 4-3 (E) 4-3. Preset Operator File 4-3. Preset Operator File The preset operator file is designed to store the standard values of the operator file items. There are two ways of calling the preset operator file; calling from the setup menu or reading at power ON. The items which can be stored on file are the same as Operator File. n A[...]

4-4 (E) HDC-900/950 IMM 4-4. Registering the Scene File 4-4. Registering the Scene File The scene file is used for storing temporary video adjustment values according to the scene. 5 files can be stored and the data will be stored in the camera and memory stick. The data can be stored using a setting menu or MSU (master setup unit). Scene files can[...]

HDC-900/950 IMM 4-5 (E) 4-4. Registering the Scene File Storing the Scene File to the Memory Stick (Refer to step 1 of Fig. 4-3.) The scene file stored in the camera unit is stored to the memory stick. Set the setup menu as follows. Reading the Scene File from the Memory Stick (Refer to step 3 of Fig. 4-3.) The scene files stored in the memory stic[...]

4-6 (E) HDC-900/950 IMM 4-5. Registering Reference Files 4-5. Registering Reference Files This file can be stored and read using the setup menu or MSU (master setup unit). Only one file can be stored, and will be stored in the camera and memory stick. As for the items to be stored, refer to Section 4-8,“ File Items”. For reference files, differ[...]

HDC-900/950 IMM 4-7 (E) 4-5. Registering Reference Files Reading the Reference File from the Memory Stick (Refer to step 3 of Fig. 4-4.) During the file storing, the reference files which have been stored in the memory stick at the same time are read and the reference files in the camera can also be changed. Set the setup menu as follows. After the[...]

4-8 (E) HDC-900/950 IMM Initializing Only Specified Items Using the Setup Menu (Refer to step 4 of Fig. 4-4.) References files for specified items can be initialized using the setup menu. (1) Set the setup menu as follows. [FILE] → [FILE|CLEAR] → [10|SEC|CLEAR] → [ON] (2) Move to the page containing the items to be initialized from the refere[...]

HDC-900/950 IMM 4-9 (E) 4-6. Registering the Lens File 4-6. Registering the Lens File The white shading which occurs when the extender is turned on, flare balance, white balance, F value of the open edge of the lens, name, etc. can be stored. Up to 16 files can be stored. The adjustment data can be called by selecting the lens file. This data will [...]

4-10 (E) HDC-900/950 IMM 4-7. Registering the OHB File 4-7. Registering the OHB File The OHB file is used for storing the maintenance adjustment values of the CCD block and the data will be stored in the camera. The data can be stored using the setup menu or the MSU (master setup unit). The items to be stored are the black shading, white shading, N[...]

HDC-900/950 IMM 4-11 (E) 4-7. Registering the OHB File 4-7-2. Adjusting the ND Offset The white balance may be slightly deviated in the ND filters. In such cases, adjust the offset. Taking the ND filter 1 white balance as the reference, the ND offset stores the deviation of the white balance of ND filter 2, 3, 4. Adjusting the ND Offset (1) Set the[...]

4-12 (E) HDC-900/950 IMM 4-8. File items 4-8. File items OPERATION menu page item OPERATOR REFERENCE SCENE OHB LENS STANDARD ( * 9) Power is Factory turned ON set 1 VF DISPLAY __ _ _ _ _ ( * 2) 2 ! IND __ _ _ _ _ ( * 2) 3 MARKER __ _ _ _ _ ( * 2) 4 GAIN SW L/M/H __ _ _ _ _ 0/6/12 dB 5 ZEBRA __ _ _ _ _ ( * 2) VF DETAIL __ _ _ _ _ 0 6 AUTO IRIS WINDO[...]

HDC-900/950 IMM 4-13 (E) page item OPERATOR REFERENCE SCENE OHB LENS STANDARD ( * 9) Power is Factory turned ON set 4 BLK GAMMA Y RANGE _ __ REF _ 4 BLK GAMMA Y SW _ __ REF _ OFF 5 LOW KEY SAT _O O _ _ REF _ 0 LOW KEY SAT SW _ __ REF _ OFF SATURATION SW _ __ REF _ OFF SATURATION LEVEL _O O _ _ REF _ 0 LOW KEY SAT RANGE _ __ REF _ LOW 6 KNEE POINT R[...]

4-14 (E) HDC-900/950 IMM 4-8. File items page item OPERATOR REFERENCE SCENE OHB LENS STANDARD ( * 9) Power is Factory turned ON set 10 PRESET MATRIX SW _ __ REF _ OFF MATRIX SW _ __ REF _ OFF 11 MULTI MATRIX PHASE __ _ _ _ _ _ 0 MULTI MATRIX HUE _ __ REF _ 0 MULTI MATRIX SAT _ __ REF _ 0 MULTI MATRIX SW _ __ REF _ OFF 12 SHUTTER SEL _ __ REF _ ( * [...]

HDC-900/950 IMM 4-15 (E) 4-8. File items page item OPERATOR REFERENCE SCENE OHB LENS STANDARD ( * 9) Power is Factory turned ON set 7 MULTI FORMAT __ _ _ _ _ _ 59.94 I 8 PROMPTOR __ _ _ _ _ _ OFF BNC SDI OUT __ _ _ _ _ _ OFF LINER EXP __ _ _ _ _ _ OFF 9 VTR 26P CABLE COMP __ _ _ _ _ _ OFF VTR 26P MAIN VIDEO ADJ __ _ _ _ _ _ 0 VTR 26P VIDEO SEL __ _[...]

4-16 (E) HDC-900/950 IMM 4-8. File items MSU connected only item OPERATOR REFERENCE SCENE OHB LENS STANDARD ( * 9) Power is Factory turned ON set V DTL CREATION MODE _ __ REF _ Y V DTL CONTROL MODE _ __ _ REF _ H/V KNEE MAX _ OFF __ OFF OFF OFF AUTO KNEE POINT _ __ _ REF _ 0 WHITE SETUP MODE __ _ _ _ _ _ AWB shows an analog item which will not be i[...]

HDC-900/950 IMM The material contained in this manual consists of inf or mation that is the proper ty of Sony Corporation. Sony Corporation e xpressly prohibits the duplication of any portion of this manual or the use thereof for an y purpose other than the operation or maintenance of the equipment described in this manual without the e xpress writ[...]

Printed in Japan Son y Cor por ation 2003. 10 08 B&P Company ©2000 HKC-T950 (SY) HDC-900 (SY) HDC-900/L (J) HDC-910 (UCJ, CE) HDC-910/L (J) HDC-930 (SY) HDC-950 (JN, SY) J , E 3-204-338-08[...]