Simplicity 1600 Series manuale d’uso

Parts Manual Rev. 10/2005 Broadmoor / 1600 / 2600 Series Lawn Tractors & Mower Decks TP 400-4205-01-BM-SMA Mf g . No. Descri p tion 1 8 HP Models 1694629 Broadmoor, 18HP Hydro RMO 1694630 Broadmoor, 18HP Hydro RMO 1694631 Broadmoor, 18HP Hydro RMO (CE) 1694683 Broadmoor, 18HP Hydro RMO (CE) 1694807 2618, 18HP Hydro RMO (CE) 1694844 2618H, 18HP [...]

[...]

Table Of Content s Torque Specification Chart ...... ............................ ......................... .......... Inside Back Cover PRODUCT COMPONENTS PAGES Frame & Front Axle Gr oup ...................................................................................................... ............................. 4 Steering Group - Manual[...]

Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs. (48-56 Nm) Torq ue to 22-4 0 ft. lbs. (30-5 4 Nm) Torq ue to 55-6 0 ft. lbs. (74-8 1 Nm) 12 18[...]

PART NO. DESCRIPTION REF NO QTY. Frame & Front Axle Group Footnote s 1 1930645 7 NUT, Hex Flange Lock, 3/8-16 2 1960035 2 WASHER 3 2860646 1 NUT, Hex Flange, 5/8-11 4 1722212A 1 PLATE, Axle 5 1724081A 1 TOWER & SUPPORT ASSEMBLY 6 1923683 4 CAPSCREW, Hex Head Taptite, 3/8-16 x 3/4 7 1723528A 1 SUPPORT 8 1664847 4 CAPSCREW, Hex Head Taptite, [...]

Steering Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 36-44 ft. lbs. or 48-60 Nm Steering cap snaps over steering wheel. Use washers as required. Torque to 36-44 ft. lbs. or 48-60 Nm Bearin g mounts be low frame. Slide pinion into gear before tightening nuts. 18 21 14 7 11 10 [...]

PART NO. DESCRIPTION REF NO QTY. Steering Group - Manual Steering Footnote s 1 1722318 1 STEERING WHEEL, Straight, Shaft 2 1722319 1 CAP, Steering Wheel, SMI Logo 2 1725024 1 CAP, Steering Wheel, Plain 3 1960540 1 PIN, Spring, 5/16 x 2-1/2 4 1722749 1 COVER, Rubber, Upper Steering Shaft 5 1960114 5 WASHER, 3/4 6 2176440 2 BUSHING, 15/32 x 7/8 x 7/8[...]

Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Ga sket & Ha rdw are, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley. Torque to 45-50 ft . lbs. (61-68 Nm) Torque to 24-36 ft .[...]

PART NO. DESCRIPTION REF NO QTY. Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Briggs & Stratton Vanguard Twin, Mo del 303777, Type 1114-E1 2 * 1 ENGINE, 18HP Briggs & Stratton Vanguard Twin, Mo del 356777, T[...]

Engine & Electric Clutch Group - 18HP & 20HP B riggs & Stratton, Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Ga sket & Ha rdw are, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley. Torque to 45-50 ft . lbs. (61-68 Nm) Torque to 24-36 ft .[...]

PART NO. DESCRIPTION REF NO QTY. Engine & Electric Clutch Group - 18HP & 20HP B riggs & Stratton, Vanguard Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 18HP Briggs & Stratton Vanguard Twin, Mo del 356777, Type 0113-E1 2 * 1 ENGINE, 20HP Briggs & Stratton Vanguard Twin, Mo del 358777, T[...]

Engine Group - 18HP Kohler NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Eng ine Manufact urer Gas ket & H ard war e, Torque to 18 ft. lb s. (25 Nm) Tie clutch w ire to keep away from pulley. Torque to 45-50 ft. lbs. (61 - 68 Nm ) Torque to 19-23 ft. lbs. (26 - 31 Nm ) Note: Orien tation of All Keys Instal [...]

PART NO. DESCRIPTION REF NO QTY. Engine Group - 18HP Kohler Footnote s 1 1721704 1 MUFFLER 2 * 1 GASKET 3 * 2 LOCKWASHER, 5/16 4 * 2 CAPSCRE W, Socket Head, 5/16 -18 x 7/8, G8 5 1723165 1 HOSE, Oil Drain 6 * 1 ENGINE, 18HP Kohler Single, Model CV492S, Type PS-27534 7 1722950 1 SEAL, Circle 8 1722388A 1 BULKHEAD 9 1925003 2 CAPSCREW, Hex Head Taptit[...]

Transmission Group - Tuff Torq K-57 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compressed to 2-1/2 inches with brak e locked . Torqu e nut to 28 - 33 ft. lbs. (35 - 44 N m) 9 4 6 1 7 3 5 2 8 24 29 28 31 25 27 26 29 19 8 19 17 16 37 34 14 15 10 35 11 12 12 36 18 19 23 21 22 30 32 33 20 13 38 39 9[...]

PART NO. DESCRIPTION REF NO QTY. Transmission Group - Tuff Torq K-57 Footnote s 1 1960676 2 SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, without Differential Lock 3 1722173 1 PAD, Footrest, RH 4 1960636 1 NUT, Hex KEPS, 5/16-18, Black 5 1704351 15 FASTENER, Panel 6 1960637 6 NUT, Hex KEPS, 3/8-16, Black 7 19313[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SE AL KI T ( Inc lu d e s Re f.) #19 #20 #26 #59 #72 #8 1 #9 1 S ealant W asher S eal 8 78 82 72 9 80 76 7 75 2 37 79 77 27 40 43 42 41 38 36 39 63 70 65 97 65 71 67 68 66 61 69 3 30 29 21 28 48 31 32 47 70 14 46 60 11 [...]

PART NO. DESCRIPTION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 2 1724951 1 HOUSING ASSEMBLY, UPPER 3 1724938 1 HOUSING, LOWER 7 1718052 1 VENT VALVE 15 8 1724279 2 MAGNET, K50 9 1724280 1 HOLDER, MAGNET 11 1708684 1 SPRING 12 1724281 1 SHAFT, BYPASS 13 1720418 1 LEVER, BYPASS 14 1718061 1 RING 15 1724282 1 SEALING CAP 16[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SE AL KI T ( Inc lu d e s Re f.) #19 #20 #26 #59 #72 #8 1 #9 1 S ealant W asher S eal 8 78 82 72 9 80 76 7 75 2 37 79 77 27 40 43 42 41 38 36 39 63 70 65 97 65 71 67 68 66 61 69 3 30 29 21 28 48 31 32 47 70 14 46 60 11 [...]

PART NO. DESCRIPTION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 54 1724348 1 PLATE, JERK 55 1708689 1 WASHER 56 1724349 1 PIN, COT TER 57 1724296 1 PIN, SPRING 59 1707879 2 PACKING 58 1718100 1 PIN 6.0A x 4.0 60 1708692 1 NUT 12 61 1724955 1 GEAR & PINION ASSEMBLY 62 1724945 1 GEAR, FINAL CONTR T RAC 63 1724946 2 COLL[...]

Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 17 19 12 18 14 13 20 21 27 29 22 28 23 25 4 30 31 37 35 30 32 38 34 36 33 1 5 9 2 8 4 6 3 10 1 6 10 16 24 24 26 15 35 41 40 39 18 7 8 5 986599 The above parts group applies to the following Mfg. Nos.: 2005 20 © Copyright Simplicity Manufacturing, [...]

PART NO. DESCRIPTION REF NO QTY. Controls Group Footnote s 1 1721353 1 ROD, Brake Lock 2 1721891 1 KNOB, Push On, Red Plastic "P" 3 1930591 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 4 1919326 2 WASHER, 5/16, Black 5 1721476 1 ROD, Brake 6 1931353 2 CARRIAGE BOLT, 3/8-16 x 1 3/4 7 1663114 2 BUSHING, 5/8 x 3/4 x 3/4, Nylon 8 2821133 1[...]

Cruise Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Control Ar m from tr ansmission group. Brake ar m at idle r pivot. Hol e "A" Hook into hole "A" of frame. Install rounded edge of washer toward l ever & bracket assembly . Lubricate both sides of slot with grease. Install[...]

PART NO. DESCRIPTION REF NO QTY. Cruise Control Group Footnote s 1 1723713 1 DECAL, Cruise & Lift 2 1960666 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 3 1722303 1 KNOB, Cruise 4 1920397 1 NUT, Hex Lock ESNA Light, 1/4-20 5 1722003 1 LEVER & BRACKET ASSEMBLY, Cruise 6 1960103 2 WASHER, 3/8, Black 7 1931333 1 CARRIAGE BOLT, 5/16-18 x[...]

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Engine Sta rter Headlight Switc h DASH MOUNTED HOOD MOU NTE D UNDER HOO D UNDER HOOD UNDER S EAT Ped al Switch Sea t Switch (NC) To Elec tric Clutch To Charge Circuit To Fuel Shu t-O ff To Engine Magne to To Engine Ground To Oil Pres sure Sen sor[...]

PART NO. DESCRIPTION REF NO QTY. Electrical Group Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.8V 3 1723451 4 SOCKET ASSEMBLY, Headlight, Sealed 4 1722669 1 HARNESS, Headlight 5 1722887 1 SWITCH, PTO Push/Pull Symbols 6 1726556 1 MODULE, RMO (Includes Ref. No. 7) 7 1726557 1 KEY, [...]

Hood, Grille & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 10 12 11 13 17 9 1 5 7 8 4 6 3 9 4 4 2 15 16 14 986608 The above parts group applies to the following Mfg. Nos.: 2005 26 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694629 - Broadmoor 1694630 - Broadmoor 1694631 - [...]

PART NO. DESCRIPTION REF NO QTY. Hood, Grille & Dash Group Footnote s 1 1721804C 1 PANEL, RH Side 1 1721804D 1 PANEL, RH Side, Red 2 1721801C 1 HOOD, no Louvers 2 1721801D 1 HOOD, no Louvers, Red 3 1722110C 1 HOOD, with Louvers 3 1722110D 1 HOOD, with Louvers, Red 4 1960295 12 CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8 5 1960392 1 SCREW, Phill[...]

Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 14-19 in. lbs. (19 - 25.8 Nm) Torque to 25-30 in. lbs. (2.8 - 3.3 Nm ) 11 15 19 14 16 13 1 7 5 9 2 8 4 6 3 10 32 12 20 21 22 28 26 14 23 29 25 27 24 5 9 30 31 17 18 See Electrical Group 985908 The above parts group applies to the[...]

PART NO. DESCRIPTION REF NO QTY. Seat & Seat Deck Group Footnote s 1 1722129A 1 BRACKET, 1-5/8 x 1-3/4 2 1722307 1 * SEAT, 18" Back, Optional 2 1722306 1 * SEAT, 15" Back, Standard 3 1722128A 1 SUPPORT, Seat 4 2172434 1 CLIP, Wire 5 1709256A 2 WASHER, Spring, 5/16 x 1 -1/4, Black 6 1714263 2 SPRING, Compression 7 1919438 10 NUT, Hex L[...]

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Install into left ha nd side of lower da sh. 4 5 3 6 1 9 2 8 10 13 14 11 18 17 16 5 12 5 7 15 986412 The above parts group applies to the following Mfg. Nos.: 2005 30 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694632 -[...]

PART NO. DESCRIPTION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722302 1 GRIP, Black Vinyl 2 1722024A 1 ROD, Lift Lever with Flats 3 1930645 1 NUT, Hex Flange Lock, 3/8-16 4 1924940 1 WASHER 5 1722460 2 PIN, Quick 6 2162085 1 SPRING, Compression 7 1723866 1 NUT, Push, 3/8 8 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 9 1722284A 1 QUADRANT 10[...]

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insta ll into le ft hand side of lower dash. No te : Mo d e ls with out Cruise 4 5 3 6 1 10 2 8 11 18 19 12 21 17 16 5 13 7 14 9 15 4 5 20 986780 The above parts group applies to the following Mfg. Nos.: 2005 32 © Copyright Simplicity Manuf[...]

PART NO. DESCRIPTION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722302 1 GRIP, Black Vinyl 2 1722024A 1 ROD, Lift Lever with Flats 3 1930645 1 NUT, Hex Flange Lock, 3/8-16 4 1924940 1 WASHER 5 1722460 2 PIN, Quick 6 2162085 1 SPRING, Compression 7 1723866 1 NUT, Push, 3/8 8 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 9 1722313 1 PLUG, Lift C[...]

Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Fron t Wheels Rear Wheel s Use as requi red. Use as req uire d. 11 4 4 9 2 10 3 5 8 12 10 7 1 14 15 16 17 6 13 18 8 19 6 12 W986614 The above parts group applies to the following Mfg. Nos.: 2005 34 © Copyright Simplicity Manufacturing, Inc.[...]

PART NO. DESCRIPTION REF NO QTY. Wheels & Tires Group Footnote s 1 1722065 2 WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6) 2 1722838 1 TIRE, 15 x 6, Super Turf 3 1664090 1 TUBE, Tire, Front, 4.10/3.50 4 1717056 2 BEARING, Ball 5 1722837 1 WHEEL, 4-1/2" x 6" 6 2172353 4 VALVE STEM & CAP ASSEMBLY 7 17227[...]

Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 6 1 2 2 3 4 5 7 8 10 9 B986614 The above parts group applies to the following Mfg. Nos.: 2005 36 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694629 - Broadmoor 1694630 - Broadmoor 1694631 - Broadmoor 1694632 - Broadmo[...]

PART NO. DESCRIPTION REF NO QTY. Decals - Brand & Model Footnote s 1 1717692 1 DECAL, ICON Simplicity, Orange 2 1722551 3 DECAL, Simplicity, Silver & Blue w/Icon 3 1722776 1 DECAL, Broadmoor, Silver & Blue 4 1722773 1 DECAL, Hood Stripe, RH, Simplicity, Blue & Silver 4 1722774 1 DECAL, Hood Stripe, LH, Simplicity, Blue & Silver [...]

Decals - Safe ty & Co mmon NOTE: Unless noted otherwise, use the standard hardware torque specification chart. DANGER OPER ATIN G ON SLO PES CAN BE DANGEROUS SEE OPERATOR'S MANUAL. IF YOU CANNOT BA CK-UP A HILL,DO NOT DRI VE ON IT . ROTATING BLADES CU T OFF ARMS AND LEGS RMO™ Syste m: STOP MOWER WHE N CHILDREN ARE N EAR. NO RIDERS — TH[...]

PART NO. DESCRIPTION REF NO QTY. Decals - Safe ty & Co mmon Footnote s 1 1722806 1 DECAL, Ignition Switch Symbols, White/Black 2 1718025 1 DECAL, Automatic Control Traction 3 1722779 DECAL, 18HP 3 1722780 1 DECAL, 20HP 4 1726923 1 DECAL, Tunnel Cover, Danger Slopes/Blades 4 1723175 1 DECAL, Tunnel Cover, Danger Slopes/Blades, (Export) 5 1727014[...]

38" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out M oun t H i tc h A ss em b l y an d Leveli ng Adju stment R od using upper set of ho les Hook Spring to Belt Guide Hook Spring {Ref 22 } here when assembled. 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16[...]

PART NO. DESCRIPTION REF NO QTY. 38" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1723025 1 V-BELT 2 1928957 2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 3 1677135A 1 GUARD, Belt 4 1922755 4 WASHER, Plain, 3/8 5 1716553 1 SPACER 6 1685150 1 PULLEY (Includes Ref. No. 5) 7 1665835 1 GRIP, Lever 8 1704520 1 CLUTCH LEVER ASSEMBLY (Includes Ref. [...]

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Insert Must Face Out Mount Hitch A ssembly and Leveling Adjustment Rod using upper set of holes 1 1 2 3 47 3 3 5 5 4 4 3 3 3 6 7 8 9 10 11 12 14 13 3 4 4[...]

PART NO. DESCRIPTION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1930644 2 NUT, Hex Flange Lock, 1/2-13 2 1686686 1 SHAFT & BAR ASSEMBLY (Includes Ref. No. 13) 3 1924366 8 WASHER, Plain, 1-1/4 4 1668513 6 ROLLER 5 1602946 2 SPACER 6 1704073A 1 BAR, Roller 7 1704082 2 NUT, Adjuster 8 2816965 2 LOCKWASHER, 3/[...]

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Insert Must Face Out Mount Hitch A ssembly and Leveling Adjustment Rod using upper set of holes 1 1 2 3 47 3 3 5 5 4 4 3 3 3 6 7 8 9 10 11 12 14 13 3 4 4[...]

PART NO. DESCRIPTION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 45 1704093 1 ROD, Adjustment 46 1706644 1 SPACER 47 1722036 2 ROLLER The above parts group applies to the following Mfg. Nos.: 2005 45 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694036 - 38" Mower 1694042 - 38" Mower[...]

38" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Viewed From Bottom Torque to 50-70 ft. lbs. Torque to 45-55 ft. lbs. Apply gasket former to this surface if foam gasket is not used. 13 2 14 10 19 20 21 22 23 24 16 17 18 11 25 34 33 32 31 30 29 28 25 35 27 28 37 2[...]

PART NO. DESCRIPTION REF NO QTY. 38" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1705449 1 DEFLECTOR, Plastic 2 1960518 1 NUT, Push 3 1960353 2 WASHER, Plain 4 1704873 1 CLAMP 5 1916964 2 LOCKWASHER, 1/4 6 1916622 2 NUT, Hex, 1/4-20 7 1919326 1 WASHER, 5/16, Black 8 1723938 1 SPRING, Torsion 9 1706709A 1 ROD, Deflector, Front 10 17[...]

40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot "B" Slot "A" Insert Must Face Out 2 2 16 16 10 29 28 10 35 30 32 31 30 10 29 28 27 26 25 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 4 3 2 1[...]

PART NO. DESCRIPTION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 1 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 6 WASHER, 3/8 3 1725408 1 PULLEY, Idler 4 1723391 1 V-BELT, Arbor Drive 5 1722175A 1 BELT GUIDE 6 1960534 2 WASHER, 3/8 7 1724835 1 ARM ASSEMBLY, Idler with Bushings & Fitting, 38 Tooth 8 1931355 [...]

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly. From "A" To "A" In se r t Mu st Fac e Out In se rt Mu st Fac e Out 11 17 15 19 12 18 14 16 13 20 21 27 25 29 22 28 24 23 30 31 37 35 39 32 38 [...]

PART NO. DESCRIPTION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1722661 1 ROD 2 1924940 8 WASHER, 3/8 3 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1 3/4 4 1917421 1 NUT, Hex Jam, 3/8-16 5 1960601 1 NUT, Hex Flange, 3/8-16 Black 6 1720704 1 ROD & WASHER ASSEMBLY, Adjust Handle 7 1651820 1 GRIP, Black Vinyl For [...]

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly. From "A" To "A" In se r t Mu st Fac e Out In se rt Mu st Fac e Out 11 17 15 19 12 18 14 16 13 20 21 27 25 29 22 28 24 23 30 31 37 35 39 32 38 [...]

PART NO. DESCRIPTION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 45 1720919 1 DECAL, Height of Cut 46 1720931A 1 BRACKET, Height of Cut 47 1930651 1 NUT, Hex Centerlock 3/8-16 48 1935048 1 NUT, Hex Flange Lock, 5/16-18 49 1664847 8 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4 50 1704082 1 NUT, Hex Adjusting 5[...]

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 45-55 ft. lbs. (61 -75 Nm) Torque to 50-70 ft/lbs (68 -95 .2 Nm) Torque to 14-18 ft. lbs. (19-25 N m) 11 17 15 19 18 14 16 13 20 21 27 25 29 22 28 24 26 23 30 30 31 37 35 39 32 38 34 36 33 40 41 45 42 44 [...]

PART NO. DESCRIPTION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8 2 1933263 1 WASHER, 7/16 3 1656916 3 WASHER, Spring 4 1714419 1 NUT, Hex Flange, 9/16-18 5 1713091 1 PULLEY 6 1719870 1 HUB 7 1724453 2 SPROCKET & FLANGE ASSEMBLY, Riveted, 38 Tooth 8 1657969A 2 SHIE[...]

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 45-55 ft. lbs. (61 -75 Nm) Torque to 50-70 ft/lbs (68 -95 .2 Nm) Torque to 14-18 ft. lbs. (19-25 N m) 11 17 15 19 18 14 16 13 20 21 27 25 29 22 28 24 26 23 30 30 31 37 35 39 32 38 34 36 33 40 41 45 42 44 [...]

PART NO. DESCRIPTION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 44 1721132A 1 GUARD, Extension 45 1675044 4 RIVIT, Pop 46 1960096 4 WASHER, 3/16 x 3/4 x 1/16 47 1713675 2 WASHER, Bellville 48 1726825 1 ARBOR SHAFT & BEARING ASSEMBLY The above parts group applies to the following Mfg. Nos.: 2005 57 © Copyright Si[...]

44" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pulley Movable Idler Pulley Arbor Drive Pulley Arbor Drive Pulley Arbor Drive Pulley Arbor Drive Pulley Movable Idler Pulley Grease Mount Hitch Assembly and Leveling Adjustment Rod using upper set of holes fo[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1601672 1 V-BELT, Mower Drive 2 1721532 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, 3/8-16 5 1916965 2 WASHER, Lock, 3/8 6 1677135A 1 BELT STOP, Idler 7 1924940 14 WASHER, 3/8 8 1666294 2 SPACER, 25/64 x 21/32 x 7/16, Powder Meta[...]

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow ards discharge Mount Hitch Assembly and Leveling Adjustment Rod using upper set of holes for 15" f ront tires using lower set of holes for 16"[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1685443 1 SHAFT & BAR ASSEMBLY, 44" (Includes Ref. No. 9) 2 1704082 1 NUT, Adjuster 3 2860681 3 NUT, Toplock Spiral Flange, 3/8-16 4 1677507 1 SLIDE 5 1924361 1 WASHER, Plain, 1/2 6 2172622 1 BOLT, Shoulder, 3/ 8-16 7 1602946 2 SPACER, 25[...]

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow ards discharge Mount Hitch Assembly and Leveling Adjustment Rod using upper set of holes for 15" f ront tires using lower set of holes for 16"[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 45 1704087 1 TRUNNION, Threaded 46 1719901 1 CRANK, Height of Cut 47 1714084 1 KNOB, Height Crank 48 1960093 1 PAL NUT The above parts group applies to the following Mfg. Nos.: 2005 63 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.[...]

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cure[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY, 4-1/2 O.D. 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY, 4-1/4 O.D. 6 1713533 1 HUB, Double Pulley 7 1655729A 3 COVER, Arbor Housing 8 2108202 3 BEARING, [...]

44" Mower Deck - Housin g, Arbors & Blades CE NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this su rface if foam ga sket is no t used . Fill a rbors with multipur pose grease after gas ket[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades CE Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY 6 1713533 1 HUB, Double Pulley 7 1655729A 3 COVER, Arbor Housing 8 2108202 3 BEARING, Ball, 3/4 x 1-3/4 x 5[...]

44" Mower Deck - Housin g, Arbors & Blades CE NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this su rface if foam ga sket is no t used . Fill a rbors with multipur pose grease after gas ket[...]

PART NO. DESCRIPTION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades CE Footnote s 44 1716878A 1 BAFFLE, Anti-Blowout, RH (CE Only) The above parts group applies to the following Mfg. Nos.: 2005 69 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694178 - 44" Mower 1694822 - 44" Mower TP 400-4205-01-BM-SMA[...]

50" Mower Deck - Cl ut ch & Support NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pul ley Movable Idler Pul ley Arbor Drive Pul ley Arbor Drive Pul ley Arbor D r ive Pul ley Arbor Drive Pul ley Movabl e Idler Pulley Grease Mount Hitch Assembly and • Level ing A djustm ent R od using lower set [...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Cl ut ch & Support Footnote s 1 1707740 1 V-BELT, Mower Drive 2 1703836 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, 3/8-16 5 1916965 2 WASHER, Lock, 3/8 6 1677135A 1 BELT STOP, Idler 7 1924940 14 WASHER, 3/8 8 1716553 1 HUB, 25/64 x 3/4 x 63/64, Powder Metal 9 168515[...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out Mount H itch Assembly and • Leve ling Adju stment Rod using low er set of holes 7 GREA SE GRE ASE 3 2 1 4 5 6 9 10 11 9 10 43 44 45 42 34 43 27 19 28 26 30 29 31 41 [...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1686687 1 SHAFT ASSEMBLY, Roller, 50", (Includes Ref. No. 10) 2 1704082 1 NUT, Adjuster 3 2860641 3 NUT, Hex Aluminum Insert Lock, 3/8-16 4 1677507 1 SLIDE 5 1924361 1 WASHER, Plain, 1/2 6 2172622 1 BOLT, Shoulder, 3/ 8-16 7 1924366 8 WASHER,[...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out Mount H itch Assembly and • Leve ling Adju stment Rod using low er set of holes 7 GREA SE GRE ASE 3 2 1 4 5 6 9 10 11 9 10 43 44 45 42 34 43 27 19 28 26 30 29 31 41 [...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 45 1960093 1 PAL NUT The above parts group applies to the following Mfg. Nos.: 2005 75 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694174 - 50" Mower TP 400-4205-01-BM-SMA[...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling Adjustment Rod using lower set of h oles 4 GREASE GREASE 16 15 14 17 18 19 20 21 6 20 21 1 2 3 48 34 43 37 10 38 36 40 39 41 47 46 45 44 43 42 22 17 2[...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1719901 1 CRANK, Cutting Height 2 1714084 1 KNOB, Height Crank 3 1960093 1 PAL NUT 4 1924366 8 WASHER, Plain, 1 1/4 5 1709195 3 SPACER, 21/32 x 5/32 x 5/8 6 1668513 8 ROLLER 7 2825094 2 TIE, Self Locking 8 1708266A 2 CHAIN, 6 Link, 8 13/32 Long 9 [...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling Adjustment Rod using lower set of h oles 4 GREASE GREASE 16 15 14 17 18 19 20 21 6 20 21 1 2 3 48 34 43 37 10 38 36 40 39 41 47 46 45 44 43 42 22 17 2[...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 45 1704116A 1 BRACKET, Cutting Height 46 1704083A 1 ARM, Rear, Mower, RH 47 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 48 1704087 1 TRUNNION, Threaded The above parts group applies to the following Mfg. Nos.: 2005 79 © Copyright Simplicity Manuf[...]

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cur[...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY 6 1713533 1 HUB, Double Pulley 7 1655729A 3 COVER, Arbor Housing 8 2108202 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 [...]

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cur[...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY 6 1713533 1 HUB, Double Pulley 7 1655729A 3 COVER, Arbor Housing 8 2108202 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 [...]

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cur[...]

PART NO. DESCRIPTION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 44 1927557 2 NUT, Hex, Whizlock, 5 /16-18 45 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 The above parts group applies to the following Mfg. Nos.: 2005 85 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694473 - 50" Mower 1694474 - 50&q[...]

[...]

T or que Specification Char t FOR ST ANDARD MACHINE HARDWARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.[...]

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. 2005[...]