Ryobi RS281VS manuale d’uso

OPERA TOR’S MANUAL RANDOM ORBIT SANDER V ARIABLE SPEED DOUBLE INSULA TED RS281VS SA VE THIS MANUAL FOR FUTURE REFERENCE Y our sander has been engineered and manufactur ed to Ryobi’ s high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance. W[...]

2 n Introduction ..................................................................................................................................................................... 2 � n General Safety Rules ..........................................................................................................................................[...]

3 GENERAL SAFETY RULES n Avoid accidental starting. Be sure switch is off before plugging in. Ca rry ing t ool s w ith yo ur fi nge r o n the switc h or plugging in tools that have the switch on invites accidents. n Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool m[...]

4 SERVICE n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to fol low Mai nte[...]

5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpr eta- tion of these symbols will allow you to operate the tool better and safer . Read The Operator’ s Manual Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol SYMBOL NAME DESIGNA TION/EXPLANA TION [...]

6 SYMBOLS SERVICE Servicing requir es extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your near est AUTHORIZED SERVICE CENTER for repair . When servic- ing, use only identical replacement parts. WARNING: SA VE THESE INSTRUCTIONS The following signal words an[...]

7 EXTENSION CORDS When using a power tool at a considerable distance from a power sour ce, be sur e to use an extension cord that has the capacity to handle the current the tool will draw . An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power . Use the chart to determine the minimum wir e size requir ed i[...]

8 FEA TURES PRODUCT SPECIFICA TIONS Sanding Disc Diameter ................................................ 5 in. Motion ......................................................... Random Orbit Orbit Diameter ........................................................ 3/32 in. No Load Speed .....................................7,000-12,000/min. Input ...[...]

9 UNP ACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no br eakage or damage occurred during shipping. n Do not discar d the packing material until you have care- fully [...]

10 Fig. 2 Fig. 3 A TT ACHING ADHESIVE SANDING DISCS See Figure 2. n Unplug the sander . n Peel the paper backing from the sanding disc. n Align the holes in the sanding disc with the holes in the backing pad. NOTE: Line up the holes in the sanding disc with the holes in the backing pad in order for the dustless feature to function properly . n Pres[...]

11 Fig. 4 TURNING THE SANDER ON/OFF See Figure 4. Follow these directions to turn the sander on and off. n T o turn the sander on: Slide the switch to the left (|). n T o turn the sander off: Slide the switch to the right (O). ADJUSTING THE SPEED See Figures 4 - 5. The variable speed feature allows the sander to operate at speeds that can be adjust[...]

12 TO A TT ACH THE DUST BAG ASSEMBL Y See Figure 6. n Unplug the sander . n Slide the dust bag assembly onto the blower exhaust on the sander using a slight twisting motion. TO EMPTY THE DUST BAG ASSEMBL Y See Figures 6 - 7. For more efficient operation, empty the dust bag when it is no more than half full. This will permit the air to flow through [...]

13 OPERA TING THE SANDER See Figures 9 - 10. n Secure the work to prevent it from moving under the sander . WARNING: Unsecured work could be thrown towards the operator causing injury . n Pla ce the sander on the work pie ce so tha t all of the sand- ing disc surface is in contact with the workpiece. CAUTION: Be careful not to let your hand cover t[...]

14 MAINTENANCE ACCESSORIES Look for these accessories at the service center: n 5 in. Sanding Disc – Fine n 5 in. Sanding Disc – Medium n 5 in. Sanding Disc – Coarse WARNING: Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or acce ssor ies not r ecomm ende d by the manufa ctur e[...]

15 NOTES[...]

R YOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www .ryobitools.com 983000-627 11-04 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center . Be sure [...]