Renesas H8SX/1658R manuale d’uso

H8SX/1658R Group E60 00H PLQP012 0LA-A User System Interface Board HS1658RECN61H User’s Manual Renesas M icrocomput er Developm ent Environm ent System H8SX Family / H8SX/ 1600 Ser ies HS1658R ECN61HE REJ10J1868-0200 Revision Date: S ep. 08, 2008 Rev.2.00[...]

Rev. 2.00 Sep. 08, 2008 Page ii of iv REJ10J1868-0200[...]

Rev. 2.00 Sep. 08, 2008 Page iii of vi REJ10J1868-0200 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor g rant[...]

Rev. 2.00 Sep. 08, 2008 Page iv of iv REJ10J1868-0200[...]

Rev. 2.00 Sep. 08, 2008 Page I of X REJ10 J1868-0200 IMPORTANT INFORMATION READ FIRST • READ this user's ma nual bef ore using this user system interface board. • KEEP the user's manual handy for future reference. Do not attempt to u se the user s ystem in terface board until y ou fully understa nd its mechanism. User Syst em Interf a[...]

Rev. 2.00 Sep. 08, 2008 Page II of X REJ10J1868-0200 LIMITED WA RRANTY Renesas warrants its user syst em interfa ce boards to be manufactu red in accordance with published specific ations and free from defects in material and/or workmanship. Renesas will repair or replace a ny user system interfac e boards determined to be defective in material and[...]

Rev. 2.00 Sep. 08, 2008 Page III of X REJ10 J1868-0200 State Law : Some states do not allo w the exclusion or limitation of implied warran ties or liability for incidental or c onsequential damages, s o the above limi tation or excl usion may not apply t o you. This warrant y gives you s pecifi c legal rights , and yo u may have ot her rights which[...]

Rev. 2.00 Sep. 08, 2008 Page IV of X REJ10J1868-0200 SAFETY PAGE READ FIRST • READ this user's ma nual bef ore using this user system interface board. • KEEP the user's manual handy for future reference. Do not attempt to use the user sys tem in terface boa rd until you fully understand its mechanism. DEFINITION OF SI GNAL WORDS This [...]

Rev. 2.00 Sep. 08, 2008 Page V of X REJ10 J1868-0200 W ARNING Observe the pr ecautions list ed below. Fai lure to do so will result in a FIRE H AZARD and will damage the us er system and the emul ator product or will r esult in PERSONAL INJURY. The USER PROGRA M will be LOST. 1. Do not repair or remodel the emul ator product by yourself for e lectr[...]

Rev. 2.00 Sep. 08, 2008 Page VI of X REJ10J1868-0200[...]

Rev. 2.00 S ep. 08, 2008 Page V II of X REJ 10J1868-0200 Preface The HS1658RECN61H is a user system interface board that connects a us er system for the H8SX/1658R PLQP0120LA-A (former code: FP-120B ) package to the H8SX/ 1650 E6000H emulator (HS1650EP H60H). Emulati on of the H8SX/1658R group is only pos sible w hen this user system interface boar[...]

Rev. 2.00 Sep. 08, 2008 Page VIII of X REJ10J 1868-0200[...]

Rev. 2.00 S ep. 08, 2008 Page I X of X REJ 10J1868-0200 Contents Section 1 Configuration ........................................................................................1 Section 2 Connection Procedures ..........................................................................3 2.1 Connecting the User System Interf ace B oard to the User Sy[...]

Rev. 2.00 S ep. 08, 2008 Page X of X REJ10J 1868-0200[...]

Secti on 1 Configuration Rev. 2.00 S ep. 08, 2008 Page 1 of 30 REJ10J 1868-0200 Section 1 Configuration Figure 1 and table 1 s how the external appearance and components , respectively, of t he user system interface board for the PL QP0120LA-A package. P lease make sure you have all of these components after you have unpacked t he box. Evaluation-c[...]

Secti on 1 Configuration Rev. 2.00 S ep. 08, 2008 Page 2 of 30 REJ10J 1868-0200 CAUTION Use an NQPACK120SE-ND so cket and an HQPACK120SE cover (manufactured by Tokyo Elet ech Corporation) fo r the PLQP0120LA-A-packaged IC so cket on the user syst em. Table 1 HS1658RECN 61H Componen ts No. Component Quantity Remarks 1 User system interface board 1 2[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 3 of 30 REJ10J 1868-0200 Section 2 Connection Procedures 2.1 Connectin g the User System Interface B oard to the User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected or removed. Before connecting t he two, [...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 4 of 30 REJ10J 1868-0200 To connect the b oard to the u ser system, follow th e instructions belo w. 2.1.1 Installing t he IC Socket After checking the locat ion of pin 1 on the IC s ocket fasten it to the user s ystem before soldering. CAUTION After confirming the locat ion of pin 1 o[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 5 of 30 REJ10J 1868-0200 2.1.2 Soldering the IC Socket After fasteni ng, solder the IC socket for a PLQP0120LA-A package to t he user system. CAUTION Be sure to completely solder the leads so t hat the solder gently covers the leads and forms solder fillets. (Use slightly more solder t[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 6 of 30 REJ10J 1868-0200 2.1.4 Fastening the IC Socket Connector CAUTION 1. Use the screwdriver provided fo r tightening screws. 2. The tightening torque must be 0.054 N•m or less. If the applied torque ca nnot be accurately measured, stop tightening when th e force required to tu rn[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 7 of 30 REJ10J 1868-0200 User system interface board User system Pin 1 Screws (M2 × 10 mm) (for fastenin g the board) IC socket (NQPACK120SE-ND manufactured by Tokyo Eletech Corporation) Figure 3 Connecting the User System In terface B oard to the User System[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 8 of 30 REJ10J 1868-0200 2.2 Exchangi ng the Sp acers of the Evalu ation-Chip Board After connecting the user system in terface board to the us er system, be careful not to apply load to the user system. Exchange the spacers (2.6MP × 10 mm) of the evaluation-chip board with the spacer[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 9 of 30 REJ10J 1868-0200 2.3 Connectin g the User System Interface B oard to the Evalu ation-Chip Board W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJU[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 10 of 30 REJ10J 1868-0200 Connector No. UCN1 UCN1 UCN2 UCN2 User system interface board Evaluation-Chip Board Connector No. Board Connector No. Evaluation-chip board Figure 5 Connecting the Us er System In terface Board to the Evaluati on-Chip Board[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 11 of 30 REJ10J 1868-0200 2.4 Recom mended Dim ensions for t he User System Mo unting Pad (Footprint) Figure 6 shows the recommended dimensi ons for the mounting pad (foot print) for the us er system with the IC s ocket for a PLQP0120LA-A package (NQPACK 120SE-ND: manufactured by Tokyo[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 12 of 30 REJ10J 1868-0200 2.5 Dimensions of t he Evaluation-Chip Boar d and the Use r System Interface Board The dimensions of the evaluati on-chip board and the user s yst em interface board are shown in figure 7. Unit: mm Tolerance: ± 0.5 mm 140.0 Evaluation-chip board User system i[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 13 of 30 REJ10J 1868-0200 2.6 Dimension s after Connectin g the User System Interface B oard The dimensions of the ass embly after the user syst em interface board has been connected to the user system are s hown in figure 8. Unit: mm Tolerance: ±1.0 mm 32.9 13.3 54.9 User system Eval[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 14 of 30 REJ10J 1868-0200 2.7 Using the Emulator withou t Connecti ng User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h side[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 15 of 30 REJ10J 1868-0200 1 3 SW1 USER OFF USER ON Figure 9 SW1 Jumper Socket Spacer (2.6MQ x 13 mm) Figure 10 Attaching Spacers[...]

Secti on 2 Connection Proc edures Rev. 2.00 S ep. 08, 2008 Page 16 of 30 REJ10J 1868-0200[...]

Secti on 3 Instal ling the MCU on t he User Sy stem Rev. 2.00 S ep. 08, 2008 Page 17 of 30 REJ10J 1868-0200 Section 3 Installing the MCU on the User Sys tem CAUTION 1. Check the locat ion of pin 1 before inserting th e MCU. 2. Use a screwdriver whose head matches the screw head. 3. The tightening torque must be 0.054 N•m or less. If the applied t[...]

Secti on 3 Instal ling the MCU on t he User Sy stem Rev. 2.00 S ep. 08, 2008 Page 18 of 30 REJ10J 1868-0200 MCU Pin 1 IC socket (NQPACK120SE-ND manufactured by Tokyo Eletech Corporation) User system Screws (M2.0 x 6 mm) Socket cover (HQPACK120SE manufactured by Tokyo Eletech Corporation) Figure 11 Insta lling the MCU on the User System[...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 19 of 30 REJ10J 1868-0200 Section 4 User System Interface Circuits The following user system interface circuits are required to use the emulator with the user syst em interface board. MCU User system Sub-MCU SN74CB3Q3306A PJ2, PJ3 PK2-PK7 PO16-PO23 PO24-PO31 PD0-PD7 PE0-PE7 [...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 20 of 30 REJ10J 1868-0200 MCU User system Sub-MCU P20 P21 47 k Ω Vcc P20 P21 TIOCA3 TIOCB3 Figure 13 User System Interface Circuit (2)[...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 21 of 30 REJ10J 1868-0200 47 k Ω Vcc P14 MCU User system SN74CB3Q3306A P16 P16 SN74CB3Q3306A P15 P15 P14 Sub-MCU SCK5 RxD5 TxD5 47 k Ω Vcc Figure 14 User System Interface Circuit (3)[...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 22 of 30 REJ10J 1868-0200 1 k Ω 47 k Ω Vcc MD_CLK PM0-PM4 VBUS DrVcc USD- USD+ DrVss LPT16244 Monitorin g circuit MD_CLK PM0-PM4 VBUS DrVcc USD- USD DrVss Sub-MCU User system Figure 15 User System Interface Circuit (4) Note: The power-supply circuit shown above is tu rned [...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 23 of 30 REJ10J 1868-0200 47 k Ω Vcc UHC14 EPM7128 VHC244 _RES MCU EPM7128 _RES User system Figure 16 User System Interface Circuit (5) 10 k Ω Vcc MCU EPM3256A TC ADTRGH0 P13 P13 Sub-MCU User system Figure 17 User System Interface Circuit (6)[...]

Secti on 4 User Sy stem I nterface Ci rcuits Rev. 2.00 S ep. 08, 2008 Page 24 of 30 REJ10J 1868-0200[...]

Secti on 5 Verifyi ng Operation Rev. 2.00 S ep. 08, 2008 Page 25 of 30 REJ10J 1868-0200 Section 5 Verifying Operation 1. Turn on the emulator according to the pr ocedures described in the H8SX/1650 E6000H Emulator User's Manual (HS1650EPH 60HE). 2. Verify the user system interface cable c onnections by checking the pin s tates with the EXMONIT[...]

Secti on 5 Verifyi ng Operation Rev. 2.00 S ep. 08, 2008 Page 26 of 30 REJ10J 1868-0200 ⎯ To use the crysta l resonator mounted on the eval uation-chip board Install the cry stal resonator in to the crystal reso nator termin als on the evalu ation-chip board. Evaluation-chip board Crystal resonator terminals Crystal resonator Enlar g ed view X1 X[...]

Secti on 6 Points for Caution Rev. 2.00 S ep. 08, 2008 Page 27 of 30 REJ10J 1868-0200 Section 6 Points for Caution 1. Before connecting any parts or cabl es, make sure that the pins at t he pin 1 posit ion on both sides are correctly aligned. 2. Do not apply excessive force to the user sy st em interface board while it is connected to the user sy s[...]

Secti on 6 Points for Caution Rev. 2.00 S ep. 08, 2008 Page 28 of 30 REJ10J 1868-0200[...]

Secti on 7 Restric tions Rev. 2.00 S ep. 08, 2008 Page 29 of 30 REJ10J 1868-0200 Section 7 Restrictions 1. Deep-software standby mode This emulator does not support deep-s oftware standby mode. Note that the emulator switches to the software st andby mode ev en if the register setting to select the deep-s oftware standby mode is made. 2. Sleep-inst[...]

Secti on 7 Restric tions Rev. 2.00 S ep. 08, 2008 Page 30 of 30 REJ10J 1868-0200 7. A/D converter In the emulator, the evaluation ch ip and the slave chip are used to implement fun ctions of Unit 0 and Unit 1, respecti vely, of the A/D converter. For t his reason, when the A/ D control regist er (ADCR ) has been set t o start A/D conversion (with s[...]

H8SX/1658R Group E6000H PLQP0120LA-A User System Interface Board HS1658RECN61H User's Manual Publication Date: Rev.2.00, September 8, 2008 Published b y: Sales Strategic Planning Div . Renesas T echnology Cor p . Edited by: Customer Suppor t Depar tment Global Strategic Communication Div . Renesas Solutions Cor p . © 2008. Renesas Technology [...]

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) [...]

[...]

H8SX/1658R Group E6000H PLQP0120LA-A User System Interface Board HS1658RECN 61H User’s Ma nual[...]