Renesas 32185 manuale d’uso

Rev.1.40 Revision Date: Jan. 19, 2007 32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B RE J 1 0 B 0 22 3 - 0 14 0 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Technology Cor[...]

1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any[...]

Precautions on Using The Product Described Herein 1. The product described herein should be used in com bination with the part s included with the starter kit. If the p roduct is operated i n combination with any other it em, its operat ion cannot be guaranteed. Nor will re quests for help or sugg estion be answered. 2. The product described herein[...]

Preface Thank you very much for purchasing the 32185/3 2186/32192/32195/32196 Group Starter Kits, the M3A- 2154G52B . This manual describes how to se t up the hardware and soft ware products included with the 32185/32186/3219 2/32195/32196 Group Starter Kit and th e precautions to be observed when using those products. For details about the 32192/3[...]

CONTENTS-1 Content s 1. Overview ....................................................................................................................... .1 1.1 Outline of the S tarter Kit ...................................................................................................................... 1 1.2 System Conf iguration ...............[...]

CONTENTS-2 Appendix 2 Part Li st ........................................................................................................ 31 Appendix 3 M3A-2154G02A Pr oduct S tandar ds ............................................................. 33 1. Overview .......................................................................................[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev . 1.40 Jan. 2007 Page 1 of 79 32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 1. Overview 1.1 Outline of the S tarter Kit The M3A-2154G52B Starter Kit consists of M3 A-2154G02A (32185/32186/3219 2/32195/32196 Group Evalu[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 2 of 79 1.2 System Configuration Figure 1.1 and Figure 1.2 below sh ow system co nfigurations of M3A-2154G52B connected t o an included emulator , and M3A-2154G02A by itself, respectively . Figure 1.1 System Configurat ion of M3[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 3 of 79 2. Contents of the Product Package This chapter shows the cont ents of the Starter Kit product pac kage. When unpacking, check t o see that all items are included with your packa ge. 2.1 Packaged Product Items T able 2.1[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 4 of 79 2.2 Contents of CD-ROM The CD-ROM contains the software, manuals, var iou s data sheets, and sample pr ograms which are needed for you to use th e Starter K it. When using the technical contents of the CD-ROM such as pro[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 5 of 79 3. Usage Precautions 3.1 Guaranteed Scope of the S tarter Kit The Starter Kit was developed for users to trial the 321 85/32186/32192/32195/32 196 Group microcomputer spec ifications and develo pment enviro nme nt. There[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 6 of 79 3.4 About M3T -PD32RM The following descr ibes precautions to be observ ed when using M3T -PD32RM. 3.4.1 Operating Manuals T o use M3T -PD32RM of M3A-2154G5 2B, see the manuals shown be lo w . - M3T -PD32RM release notes[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 7 of 79 (5) About hardware break Debug functions of M3T -PD32RM are realized by using the M32R core’ s internal debug circuit (SDI), and not by using the emulator ’ s hardware resources based on bus signals and debug informa[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 8 of 79 3.5 About Evaluation Board When the evaluation board does not start op eration after s upplied power , check the following points. 3.5.1 Contact failure of IC So cket Oscillation or thermal expansion may cause a poor con[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 9 of 79 4. S tarter Kit Usage Conditions The following shows th e cond itions unde r which the Start er Kit can be used. 4.1 Ambient Conditions T able 4.1 shows the ambient conditions under which the Start er Kit can be used. T [...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 10 of 79 5. Hardware Setup This chapter describes how to set up the hardware comp onents necessary to use the Starter Kit. T able 5.1 and T able 5.2 show how to set up the har dwar e components. T able 5.1 Hardware Setup Procedu[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-21 54G52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 1 1 of 79 5.1.2 M3A-2154 Evaluation Boar d Power Supply and Setting The following shows how to set the M3 A-215 4 Evaluation Board. Use a 5V DC power supply to feed power to th e M3 A-2154 Evaluation Board. Use included 5V power[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 12 of 79 5.2 Hardware Setup when the Eval uation Board by Itself in Use 5.2.1 M3A-2154 Evaluation Boar d Power Supply and Settings The following shows how to set the M3 A-215 4 Evaluation Board. Use a 5V DC power supply to feed [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 13 of 79 6. Software Setup 6.1 M3T -PD32RM M3T -PD32RM is the de bugger soft ware that controls M32100T -EZ-E from the host PC. 6.1.1 Installing M3T -PD32RM [Notes] Make sure that th e installer is exec uted by one who is author[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 14 of 79 6.1.2 S tarting M3T -PD32RM Before starting M3T -PD32RM, make sure the hardware components have been set up in accordance with the instructions in 5.1 M3A-2 154 Evaluation Board Hard ware Setup, and that the Starter Kit[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 15 of 79 Setting CPU Clock Case of using 32192 or 3 2195 or 32196 Group, while th e MCU tab is open, select th e “160” for the appropriate CPU C lock. Case of using 32185 or 32186 Group, while the MCU tab is open, select the[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 16 of 79 When you have finished the above init ializat ion, click the “OK” button to start M3T -PD32RM. If M3T -PD32RM communicates no rmally with the target system, it starts up and the M3T -PD32RM window shown in Fig ure 6[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 17 of 79 6.1.4 T erminating M3T -PD32RM T o terminate M3T -PD32RM, choose [F ile] -> [Exit ] from the pul ldown menu. Then, a d ialog box appears prompting you for your c onfirmation (see Figure 6.6 ). Click th e “OK” but[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 18 of 79 6.2 M3T -CC32R 6.2.1 Installing M3T - CC32R (1) Run cc32rv500r00_e.exe that is incl uded in the Eng T ool Cc32r directory of the CD-ROM. (2) Proceed to install M3T -CC32R following messages on the inst allation scre[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 19 of 79 Appendix 1 Contents of CD-ROM 1. Contents of CD-ROM The CD-ROM contains the software, manuals, variou s data sheets, and sample programs which are needed for you to use th e Starter K it. When using the technic al conte[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 20 of 79 1.1 Acrobat The CD-ROM contains files necessa r y to read manuals (PDF files). The documents included in the CD-ROM have bee n verified to be displa yed and printed using the f ollowing versions of Acrobat. If you have [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 21 of 79 1.2 T ool (1) M3T -CC32R M3T -CC32R (Cross T ool Kit for the M32R Fam ily , trial version whos e useful period is limited) is included. Its directory structure is sh own below . (Engli sh version) Eng+T ool+Cc32r+ + cc3[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 22 of 79 (3) M3S-KD32R (Discontinued) M3S-KD32R (De bugger for the Star ter Kit) is included. This debugger soft ware (W indows -compliant version) is us ed to control the microcom puter on the evaluatio n board from the host PC[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 23 of 79 (5) Oldversion Old versions of tools are i nclud ed. Its directory structure is shown below . (Engli sh version) Eng+T ool+Oldversio n+ + Cc32rv3 : Objects for M3T -CC32R V e rsion 3 + Cc32rv41 : Objects for M3T -CC32R [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 24 of 79 1.3 Manual The M32R Family related manuals a nd data sheets are included in PDF f il e form at. (Engli sh version) Eng + Manual + + Readme_e.txt : README file + e32rsm.pdf : M32R Family software manual + rej09b01 12_32f[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 25 of 79 1.4 Board Related Manual (Document) The product standards, part list, connection diagra ms and user ’ s manuals for the evaluat ion board in Starter Kit are included in PDF file form at. (1) M3A-21 14 Evaluation Board[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 26 of 79 (3) M3A-2152 Evaluation Board related document s The related documents for the 32176 Group Evaluati on Boar d are included in PDF fi le format. (Engli sh version) Eng+Do cument +M3A-215 2+ + Readme_e.txt : README file +[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 27 of 79 (6) M3A-2191 Pitch Converter relate d document s The M3A-21 14 Evaluation Board and M3A-2 195 Interface Board connecting pitch convert er related documents are in clud ed in PDF file format. (Engli sh version) Eng+Do cu[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 28 of 79 (8) M3A-2195 SDI Interface Board re lated document s (Discontinued) The SDI Interface B oard documents are included i n PDF file format. (Engli sh version) Eng+Document+Discontinued _model+M3A-2195+ + Readme_e.txt : REA[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 29 of 79 (11) M3A-2142 G04 Board related docum ents (Disco ntinued) The related docum ents for the MCU pin processing Board are includ ed in P D F file format. (Engli sh version) Eng+Document+Discontinued _model+M3A-2142G04+ + R[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 30 of 79 1.5 Sample Program The applicatio n notes, the object and source files o f sample programs for the M32R/ECU’ s peripheral functions to b e written into the M32R/ E CU’ s internal flash memory that can be used on the[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 31 of 79 Appendix 2 Part List A part list is provided in followin g pages for your refer ence.[...]

Handling Classification Part List No. PPL-M3A-2154G52B Ti t l e M3A-2154G52B Division in charge Created Revision Checked Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 1 M32R /ECU# 6HL Evaluat[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G 52B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 33 of 79 Appendix 3 M3A-2154G02A Product S tandards This manual describes how to operat e the M3A-2154G02 A (32185/32186/32192/32195/32 196 Group Evaluation Board)[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 34 of 79 1. Overview 1.1 Outline of the Product T able 1.1 Mounted Microcomputer T ype Mounted microcomputer type name Evaluat ion board type name (socket mounted type) M32192F8VFP Default M32186F8VFP (Note1) M3A-2154G02A Note1:[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 35 of 79 1.2 External V iew An external view of the M3 A-2154G02A is shown below . Figure 1.2 External View of the M3A-2 154G02A[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 36 of 79 1.3 Block Diagram A block diagram of the M3 A- 2154G02A is shown below . Figure 1.3 Block Diagram of the M3A-2154G02A CAN connector CAN driver SIO CAN FP sele ct MOD select MOD0/ MOD1 FP VCCE power supply connector VCCE[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 37 of 79 1.4 S pecifications of the Evaluation Board 1.4.1 Electrical Characteristics T able 1.3 Electrical Characteristics Symbol Parameter Rated V alue VCCE,VCC-BUS Power supply voltage 4.75 V to 5.25 V T str S torage ambient [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 38 of 79 2. Functional S pecifications 2.1 Configuration of the Power Supply The power to th e M32R/ECU c an be supplied from two sources, VCC -BUS and VCCE, independently of each other . W ith default setting s, the power t o t[...]

32185/32186/3219 2/32195/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 39 of 79 T able 2.1 Configuration of the Power Supply Jumper Connector Power Supply Nam e Condition Description Shorted between 1–2 Default Power supply from VCCE (CN 2) CN1 VCC-BUS J3 Shorted between 2–3 Power supply from V[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 40 of 79 2.2 FP Select Circuit The FP selec t circuit is us ed for reprogramming the internal flash memory of the M32 R/ECU. T h i s c i r c u i t i s c o n f i g u r e d i n s u c h a w a y t h a t F P i s s w i t c h e d f r o[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 41 of 79 2.3 MOD Select Circuit This circuit is used to set operation modes of the M32R/ECU. The MOD0 power supply is configured in such a wa y that MOD0 is switch ed from th e EXTMOD0 signal of extension connector (CON2) by usi[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 42 of 79 2.4 Serial I/O Interface The evaluation board is inter faced to the host PC (W indows) through its RS-232C by using SIO of the M32R/ECU. Of the RS-232C con trol signals, onl y TXD and RXD are u sed for connection t o th[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 43 of 79 T able 2.5 Channel Selection by a Rot ary Switch Rotary switch position SIO Selected channel 0 SIO0 1 SIO1 2 SIO2 3 SIO3 4 SIO0 5 SIO1 6 SIO2 7 SIO3 8 SIO0 9 SIO1 T able 2.6 Serial I/O Interface (Jumper) Name Condition [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 44 of 79 2.5 Oscillator Circuit The oscillator circuit can be selec ted from three options by using the j umper J1: a surface mount-type 20 MHz crystal oscillator module, a surface mount-type 10 MHz crysta l oscillator module or[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 45 of 79 2.6 General-purpose Output Port LED Indicators The LED indicators (L0– L7) are used to indica te the status of the M32 R/ECU ports P1 10–P1 17. U1 M32R/ECU VCCE L0 L1 L2 L3 L4 L5 L6 L7 U6 TC74HC540AF P110 P111 P112 [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 46 of 79 2.7 General-purpose Input Port Control Circuit The general-purpose input port c ontrol circuit is us ed t o control the status of the M32 R/ECU ports P130–P137 by using toggle switches (S0–S 7). For the settings of [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 47 of 79 T able 2.10 Relationship Between T oggle Switches and Port s T able 2.1 1 T oggle Switch Positions T oggle Switch Name Corresp onding M32R/ECU Port Lever Direction Port Input Level S0 P130 Up High S1 P131 Middle Open S2[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 48 of 79 2.8 Analog Port Input Control Circuit The analog port input control circuit is used to c ontrol the status of the M32R/ ECU analog p orts AD0IN0 and AD0IN1 by using VR controls VOL0 a nd VOL1. U1 M32R/ECU VCCE AD0IN0 J1[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 49 of 79 2.9 CAN Interface The evaluation boar d is interfaced to a CAN-mounted s ystem by using the internal C AN functions of the M32R/ECU. CON1 FX1-144S-1.2 7DS CN3 TM2REA-1208 2 3 1 2 J14 3 1 TX7 CANH CANL TXD RXD U4 PCA82C2[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 50 of 79 T able 2.13 CAN Connector Pin Assignment s Connecto r Name Pin No Signal N ame Description 1 CANH1 High-level CAN0 input/output port 2 CANL1 Low-level CAN0 inp ut/output port 3 CANH2 High-level CAN1 input/output port 4 [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 51 of 79 2.10 JT AG/NBD Interface The JT AG con nector for R enesa s SDI, X CN1 co nsists of the 2.54-mm contact pitch XG4C-1034 made by Omron Corporation. The NBD connec to r , CN4 consists of the 2.54-mm contact pitch XG4C-143[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 52 of 79 T able 2.16 JT AG Interface Connector Pin Assignments Connecto r Name Pin No Signal N ame Description 1 JTCK T est clock 2 GND Ground 3 JTDI T est data input 4 JTDO T est data output 5 JTMS T est mode select 6 JTRST T e[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 53 of 79 3. Reference Data 3.1 Jumper and T est Pin List s 3.1.1 Jumpers T able 3.1 Jumper List Jumper No. Default Description J1 Shorted between 1–4 Outputs a clock from X1 (surface mount-type oscillato r module) J2 Shorted b[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 54 of 79 3.2 Extension Connectors CON1 and CON2 3.2.1 Pin Assignments of t he Extension Connector CON1 Bard edge CON1 1st pin 3rd pin 12 84 72 60 48 36 24 120 108 96 6 78 66 54 42 30 18 114 102 90 Figure 3.1 CON1 Connector Pin A[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 55 of 79 3.2.2 Pin Assignments of t he Extension Connector CON2 Figure 3.2 CON2 Connector Pin Assignments (V iew from Side of Mounted Items) T able 3.4 CON2 Connector Pin Assignments Pin No. Signal Name Pin No. Signal Name Pin N[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 56 of 79 3.3 CAN Cable (1) External View Figure 3.3 External View (2) CC1 and CC2 Conne ctions T able 3.5 Connection T able CN1 CN2 Pin No. Pin Name Pin Name Pin No. 1 — NC 1 2 CANL (blue) CANL 2 3 — GND 3 4 CANH (white) NC [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 57 of 79 3.4 Connection Diagram A connection diagra m is p rovided in fo l lowing pages for y our reference.[...]

A A B B C C D D E E 4 4 3 3 2 2 1 1 P114 P113 P116 P110 P111 P117 P117 P115 P112 P104 P103 P106 P107 P107 P100 P101 P105 P102 P174 P175 P94 P93 P93 P97 P96 P95 P130 P131 P43 P14 P12 P42 P45 P44 P47 P47 P46 P41 AD0IN0 AD0IN2 AD0IN3 AD0IN1 AD0IN6 AD0IN4 AD0IN5 AD0IN7 AD0IN8 AD0IN9 AD0IN12 AD0IN10 AD0IN11 AD0IN13 AD0IN15 AD0IN15 AD0IN14 P124 P126 P127[...]

A A B B C C D D E E 4 4 3 3 2 2 1 1 VCCER AVCC0 VDDE VREF0 VCCE VCC-BUS VCCE VCCER VCCE VCCE VCCE JTDI 1 JTRST 1 JTDO 1 RESET 1,6 JTMS 1 JTCK 1 JTCK_NBD 3 JTDI_NBD 3 JTDO_NBD 3 RESET_NBD 3 Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc> Thursday, October 12, 2006 26 A3 <Cage Code> Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc&[...]

A A B B C C D D E E 4 4 3 3 2 2 1 1 VCCE VCCE VCCE VCCE VCCE VCCE EXTFP 6 EXTMOD0 6 FP 1 CTX1 6 CRX1 6 CRX0 6 MOD0 1 CTX0 1,6 JTCK_NBD 2 JTDI_NBD 2 RESET_NBD 2 JTDO_NBD 2 P77 1,6 P76 1,6 P75 1,6 P74 1,5,6 Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc> Thursday, October 12, 2006 36 A3 <Cage Code> Size Scale CAGE Code DWG NO Rev Sheet[...]

A A B B C C D D E E 4 4 3 3 2 2 1 1 VCCE VCCE VCCE P110 1,6 P111 1,6 P113 1,6 P112 1,6 P115 1,6 P117 1,6 P116 1,6 P114 1,6 P130 1,6 P131 1,6 P133 1,6 P132 1,6 P136 1,6 P134 1,6 P137 1,6 P135 1,6 AD0IN0 1,6 AD0IN1 1,6 Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc> Thursday, October 12, 2006 46 A3 <Cage Code> Size Scale CAGE Code DWG [...]

E E D D C C B B A A 5 5 4 4 3 3 2 2 1 1 VCCE VCCE VCCE VCCE VCCE VCCE VCCE VCCE TXD3 1,3,6 TXD1 1,6 TXD2 1,6 RXD0 6 TXD0 1,6 RXD1 6 RXD2 6 RXD3 6 Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc> Thursday, October 12, 2006 56 A3 <Cage Code> Size Scale CAGE Code DWG NO Rev Sheet of 1.0 <Doc> Thursday, October 12, 2006 56 A3 <Ca[...]

A A B B C C D D E E 4 4 3 3 2 2 1 1 AD0IN9 AD0IN8 P94 AD0IN5 P23 P61 P116 P14 P22 P32 P13 P104 P150 P110 P115 P126 P95 AD0IN4 P00 AD0IN13 P12 P37 P20 P04 AD0IN10 P16 P31 P33 P30 AD0IN12 P101 P97 AD0IN7 P111 P117 P10 P107 P102 AD0IN11 P01 P112 P27 P25 P34 AD0IN2 P11 P96 P221A AD0IN0 AD0IN6 P127 P07 P63 P02 P06 AD0IN3 AD0IN15 P106 P103 P35 P03 P86A A[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 64 of 79 3.5 Part List A part list is provided in followin g pages for your refer ence.[...]

Handling Classification Part List No. PPL-M3A-2154G02A Ti t l e M3A-2154G02A Division in charge Created Revision Checked Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 1 M32R/ECU#6HL U1 M32192[...]

Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 18 Switch S0-7 A-13J2V (right-angle type) Nihon Kaiheiki Mounted directly 8 19 Connector CN1 S2B-XH-A J.S.T . Mfg. Not mounted 0 20 Connector CN2[...]

Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacture r Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 36 Laminated ceramic capacitor CP6,7 GRM216F1 1H10 3ZA01(0.01uF) Murata Mounted directly 2 37 Laminated ceramic capacitor CP17,21,22,26 GRM219F1[...]

Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 55 1% resistor (1 0 K Ω ) R7,1 1,13,15,18 MCR10EZPF1002(10K Ω ) Rohm Mounted directl y 5 56 5% resistor (2 2 K Ω ) R8 MCR10EZPJ223(22K Ω [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 69 of 79 3.6 Pattern Diagram A pattern diagram for the board is prov ided in following pag es for your reference.[...]

DK30552 M3A-2154G02 A Pattern diagra m(1/6) DRA W I N G No . PG DATE ITE M DE SCRIP TION MATE RIAL NUMBER ( MATER IAL) VO LUME RENESAS T ECHNOLOGY C ORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DATE SCAL E DIM IN mm APPR O VE D DESIGN DRA WN CHECKED Symbol - print - C REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 70 of 79[...]

DK30552 M3A- 2154G02A Pattern diagram (2/6) DR A W I NG No . PG DATE IT EM DESCRI PTION MA TERIAL NU MBER ( MATE RIAL) VO L U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 1/4 REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 71 of 79[...]

DK30552 M3A- 2154G02A Pattern diagram (3/6) DR A W I NG No . PG DATE IT EM DESCRI PTION MA TERIAL NU MBER ( MATE RIAL) VO L U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 2/4 REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 72 of 79[...]

DK30552 M3A- 2154G02A Pattern diagram (4/6) DR A W I NG No . PG DATE IT EM DESCRI PTION MA TERIAL NU MBER ( MATE RIAL) VO L U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 3/4 REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 73 of 79[...]

DK30552 M3A- 2154G02A Pattern diagram (5/6) DR A W I NG No . PG DATE IT EM DESCRI PTION MA TERIAL NU MBER ( MATE RIAL) VO L U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 4/4 REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 74 of 79[...]

DK30552 M3A- 2154G02A Pattern diagram (6/6) DR A W I NG No . PG DATE IT EM DESCRI PTION MA TERIAL NU MBER ( MATE RIAL) VO L U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 05-10-4 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Sym bol - pri nt - S REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 75 of 79[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 76 of 79 3.7 Diagram of External Dimension A diagram of external dim ension for the board is prov ided in followin g pages for your refe renc e.[...]

1 5 5 0 3 K D A 2 0 G 4 5 1 2 - A 3 M n o i s n e m i d l a n r e t x e f o m a r g a i D ) 1 / 1 ( . o N G N I W A R D G P E T A D M E T I N O I T P I R C S E D ) L A I R E T A M ( R E B M U N L A I R E T A M E M U L O V E L G N A D R 3 N O I T C E J O R P 4 - 0 1 - 5 0 S T N / E T A D E L A C S M I D N I m m D E V O R P P A N G I S E D N W A R D [...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 78 of 79 3.8 Setting Jumper by Cutting Pattern Some jumpers are shorted at def ault condition by pattern wiring on the reverse side of printed circuit board. Case of sett ing the condition excep t for default, the followin g set[...]

32185/32186/32192/321 95/32196 Group S tarter Kit User ’s Manual M3A-2154G5 2B REJ10B0223-0140/Rev .1.40 Jan. 2007 Page 79 of 79 3.9 Description of Board Silk The color of boar d silk indicates solde r specification when the i tems on board are mounte d. T able 3.7 Differen ce in the Color of Board Silk Color of board silk Solder specification wh[...]

REVISION-1 REVISION HISTORY 32185/32186/32192/32195/ 32196 Group Starter Kit User’s Manual M3A-2154G52B Description Rev. Date Page Summary 1.00 Oct. 10, 2004 — First edition 1.30 Oct. 16, 2006 — - Added the board M3 A-2154G02A product (Appendix 3) - Added the 32185 Group and the 32195 Gro up to the starter kit applica ble microcomputer - Upda[...]

[...]

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) [...]

32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B[...]