ProForm PCTL96040 manuale d’uso

Serial Number Decal Model No. PCTL96040 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER’S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts, plea[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .[...]

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the tread- mill on any surface t[...]

he decals shown has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our Customer Service Department to order a free replacement decal (see HOW TO ORDER RE- PLACEMENT PARTS on page 31 of this manual). Apply the decal in the location shown. 20. When using iFIT.com CDs and videos, an electronic “chirping?[...]

Thank you for selecting the revolutionary PROFORM ® 585s treadmill. The 585s treadmill combines advanced technology with innovative design to help you get the most from your exercise program in t he conve nience and privacy of y our home . And when you’re not exer- cising, the unique 585s trea dmil l can be folded up, re- quiring less than half [...]

6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. N ote : T he und ers ide of the tr ead mil l w alk ing bel t i s coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred[...]

3. Attach the Latch Assembly (82) to the Left Upright (84) with the two Latch Screws (46). Start both Latch Screws before tightening either of them. Note: The Latch Screws may be preattached to the Left Upright. 46 84 82 5. Set the Console Base (101) on the Uprights (80, 84). Be careful not to pinch the Wires (not shown) in the Uprights. Attach the[...]

8 8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill. 80 84 6. If the Wheels (not shown) are [...]

9 If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated Screw (108) and the Access Door (122). 2. Remove the paper from the adhesive pad on the back of the receiver (A). Orient the receive[...]

THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD Y[...]

1 1 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features that help you get the most from your workouts. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display instant exercise feedback. You can even m[...]

12 HOW TO TURN ON THE POWER Plug in the power cord (see page 10). Locate the reset /off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11) and slide the clip onto the waistband of your cloth es. Nex[...]

To change the unit of measurement, first hold down the Stop button while inserting the k ey into the console. An “E” for English miles or an “M” for metric kilometers will appear in the Speed display. Press the Speed s s button to change the unit of measurement. When the desired unit of measurement is selected, remove the key. Calories/Puls[...]

14 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 12. Select one of the preset programs. When the key is inserted, the manual mode will be selected. To select a pre- set program, press the Program Select button repeatedly until one of the six preset program indicators lights. When a preset pro[...]

15 To stop the program temporarily, press the Stop button. The Time/Pace display will begin to fla sh. To restart the program, press the Start button or the Speed s s butto n. To end the program, press the Stop button, remove the key, and then reinsert the key. Follow your progress with the displays. See step 5 on page 12. Measure your heart rate i[...]

16 During heart rate pro- grams, the matrix will show a graphic that represents your heart rate. Each time a heart - beat is detected, an ad- ditional peak will ap- pear. Enter your age and a maximum speed setting. When a heart rate pro- gram is selected, the word “AGE” and the current age setting will flash in the Calories/ Pulse display. If y[...]

17 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 17 and 18 for connecting instructions. To use iFIT.com video- cassettes , the treadmill must be connected to your VCR. See page 19 f[...]

18 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the [...]

19 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18. A. Plug one end of the audio cable into the[...]

20 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St[...]

21 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 18. In addi- tion, you must have an internet connection and an in- ternet service provider. A list of specific system re- quirements is found on our Web site. Follow the[...]

THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour. In addition, the informatio[...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the [...]

HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor. CAUTION: To decrease the possibility of injury, bend your l[...]

TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888 -936-426 6, Monday through Friday, 8h00 until 18h30 eastern time (excluding holidays). PROBLEM: The power doe[...]

With the help of a second person, carefully raise the Upright Base (97) as shown. Caref ully pivot the H ood (123) off. Locate the Reed Switch (22) and the Magnet (19) on the left side of the Pulley (18). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 3 mm (1/[...]

27 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

28 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then [...]

29 P ART LIST—Model No. PCTL96040 R0604A Key No. Qty. Description Key No. Qty. Description 1 1 Left Foot Rail 2 12 Foot Rail Screw 3 2 Isolator Bolt (Top) 4 2 Isolator Decal 5 2 Isolator Top Cap 6 2 Isolator Spring 7 2 Isolator 8 2 Isolator Bottom Cap 9 2 Isolator Bracket Cover 10 2 Isolator Bracket 11 4 Isolator Bracket Bolt 12 2 Isolator Bolt 1[...]

Star W asher (29)—2 Wheel Nut (38)—2 Handrail Bolt (42)—4 Upright Bolt (65)—4 1/4 W asher (38)—4 3/8 W asher (66)—8 Crossbar Screw (53)—2 1/2 Silver Screw (48)—1 Wheel Bolt (36)—2 3/4 T ek Screw (102)—4 1 1/4 Screw (105)—4 Silver Ground Screw (75)—1 Star W asher (9)—6 (May be an internal Star W asher) Extens[...]

31 HOW T O ORDER REPLACEMENT P ARTS If you have additional questions, please call our customer service department at 1-888-936-4266 , Monday through Friday 8h00 until 18h30 eastern time (excluding holidays). When ordering parts, please be prepared to give the following information: • The MODEL NUMBER of the product (PCTL96040) • The NAME of the[...]

Part No. 211476 R0604A Printed in Canada © 2004 ICON IP, Inc. ® IMPORTANT: MAIL WITHIN 14 DAYS OF PURCHASE NAME: ADDRESS: COUNTY: MODEL NO. RETAILER NAME: PHONE: POSTCODE: SERIAL NO. PURCHASE DATE: RETAILER ADDRESS: 1) Primary user(s) of product: o Male o Female o Family 2) Age of primary user: o 0–24 o 35–44 o 55–64 o 25–34 o 45–54 o 6[...]

2 4 3 2 9 2 1 10 1 1 12 42 1 1 15 14 13 16 17 18 19 4 3 2 2 2 16 63 62 39 66 68 52 65 64 62 39 52 60 1 1 1 1 10 9 14 15 59 67 42 17 20 20 38 21 37 38 36 33 103 20 20 23 20 21 22 24 25 26 31 30 27 29 28 32* 43 55 103 57 58 44 52 54 48 53 52 52 52 51 47 49 50 8 7 5 6 8 7 6 5 41 39 61 39 1 14 12 93 72 83 56 70 102 1 15 125 98 1 18 126 126 35 35 78 128[...]

1 12 1 13 86 84 46 82 88 79 97 89* 90 94 20 91 92 95 96 89* 20 94 90 91 92 95 96 87 86 80 79 88 75 76 85 108 108 77 71 99 40 87 100 25 20 20 25 75 103 87 87 99 40 104 108 106 108 107 1 17 120 1 19 108 108 108 108 108 108 108 108 108 108 108 108 108 124 1 1 1 108 108 108 108 108 108 108 108 101 109 74 75 77 103 108 108 76 100 51 122 108 108 108 39 3[...]