Polaroid FLM-0711LA manuale d’uso

7” Port able LCD TV with NTSC T uner FLM-071 1LA 20060525[...]

- - 1 Polaroid. Add a little color to your life. Since 1937, America has turned to Polaroid for their photography needs. T od ay , families look to Polaroid for consumer electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And while our selection has changed, you’ll still receive the sam[...]

- - 2 I m p o r t a n t S a f e t y I n s t r u c t i o n CA UTION 1. T o reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable part s inside. Refer se rvicing to qualified service personnel. Unplug the product from the wall outlet before servicing or when it is unused for a long period of time. 2. The manufactur[...]

- - 3 I m p o r t a n t S a f e t y I n s t r u c t i o n NOTES 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put[...]

- - 4 Product Features TV Signal Can be connected to the TV ante nna for receiving TV signal. S u p e r i o r S o u n d Built-in 2x1.5w stereo amplifier realizes high quality sound effects. LCD (Liquid Cr yst al Displa y) Designed with 7" color TFT liquid crystal display clearly shows the data. Audio and Video Inp ut and Output Audio and video[...]

- 5 - T able Of Content s Introduction ---- -------------- ---------------- --------------- ------------- --------------- --------------- - Important Safety Instructions --- ---------------- --------------- --------------- ---------------- ------ Product Features --- --------------- --------------- ---------------- ------------ --- ------------- --[...]

- 6 - Product Description Main Panel 1. Power button Press to turn on or off the power. 2. MENU button Press to enter or exit the setup menu. 3. CH  /  button In TV mode, press to select channel. In the menu, press to adjust the value. 4. CH +/  button In TV mode, press to select channel. In the menu, press to adjust the value. 5.  butt[...]

- 7 - Product Description (continued) 11. TV Antenna jack (2) Used to connect to the external antenna or the CATV connecting line. 12. TV Antenna jack (3) Used to connect to the external antenna. 13. LCD screen 7" color TFT LCD screen clearly display the data. Left Panel 1. Headphone jack When the headphone is plugged, the internal speakers ou[...]

- 8 - Remote Control Description Remote Control[...]

- 9 - Remote Control Description 1. Power button Press to access or exit standby mode. 2. LCD ON/OFF button Press to turn on or off the LCD screen display. 3. 16:9 button Press to change the screen aspect ratio to 16:9. 4. 4:3 button Press to change the screen aspect ratio to 4:3. 5. MENU button Press to enter or exit the setup menu. 6. Direction b[...]

- 10 - P r e p a r a t i o n o f R e m o t e C o n t r o l • The battery size is CR2025 • Refer to the drawing below , to remove the battery receptacle. • Insert the battery with the correct polarity facing up according to the mark on the battery holder . • Re-insert into the remote control. Usage of remote control For best results, please [...]

- 11 - Rechargeable Battery Description About Rechargeable Ba ttery Pack The unit can be connected with a lithium polym er rechargeable battery that attaches to the bottom of the unit. Your n ew battery should be fully charge d before initial use. Charging time is normally about 4 hours. A fu lly charged battery delivers about 2.5 to 3 hours of use[...]

- 12 - Rechargeable Battery Description Battery Pack Atta ching a nd Placement The unit’s power supply is the AC power adapter or the battery pack. The battery pack can be used as a stand. Refer to the following steps for attaching the Battery Pack: 1. Place the unit on a soft and smooth surface with its back cover facing UP (to avoid scratching [...]

- 13 - Rechargeable Battery Description Charging the Battery Pack The battery must be attached to t he unit t o char ge it. Plug the Po wer Ad apter into the unit’s DC 9.5V IN Jack, which is located on left of the unit. Plug the other end of the Power Cord into a wall Outlet. Det aching the Battery Pack If the unit is not going to be used for lon[...]

- 14 - System Connections • Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. • Always ensure that the unit, TV and any ot her electrical components are switched OFF before connecting to the unit. Power Supply Connection Connect the supplied adapter to the side of the unit [...]

- 15 - System Connections Connecting to an Amplifi er The unit can be connected to an amplifier. Plug the supplied A/V cable into the audio jack on the left side of the unit and plug the other end into an audio inp ut on the amplifier. Please refer to the equipment’s manual of your amplifier before con necting. Switch the TV/AV to TV. In TV mode,[...]

- 16 - System Connections Connecting to a DC Adapter Connect one end of the specific DC adapt er to the “DC 9.5V IN” jack on the left panel of the unit, and connect the other end to the cigarette lighter socket in the car as shown below: • The power suppl y of the car is not suitable for chargin g the battery. • Do not connect the unit to t[...]

- 17 - System Connections Connecting to CATV antenna Connect one end of the provided c onnecting line to the TV signal input jack on the right panel of the unit, and the other end to t he CATV si gnal source, as shown below: After connection, switch the TV/AV to TV. Connecting to external antenn a (1) Plug the provided external antenna (1) to the T[...]

- 18 - System Connections Connecting to external antenn a (2) Plug the provided external antenna (2) t o the TV signal input jack on the right panel of the unit, as shown below: After connection, switch the TV/AV to TV.[...]

- 19 - T V S e t u p Prep aration 1. Connect the unit to the external antenna or CATV connecting cord. 2. Connect to power supply. 3. Turn on the power of the unit. 4. Switch the TV/A V to TV . 5. Press the MENU button to enter the setup menu. Picture Setup Menu Press the MENU button once to enter the Picture setup menu, as shown on the below: The [...]

- 20 - 3. Fine T uning When the picture is not very good, you can perform fine tuning. Press the  button to select FINE, press the  button to start fine tuning, when the video and audio effects ef fect are best, stop the fine tuning and the program will be stored automatically . 4. Skip Press the  button to select ON, the channel [...]

- 21 - T r o u b l e s h o o t i n g Problem How T o Check There is no sound. • Make sure the system connecti on is corre ct. • If wired he adpho nes are p lugged in, unplug them. • Make sure the v olume is not turned down. There is no p icture. • Make sure y our system conn ection is cor rect. • Make sure the TV ant enna is co nnected. ?[...]

- 22 - S pecifications TFT screen size 7 inches TV System NTSC Audio Out Analog Audio Out Outp ut Level : 1.5V± 0.2 1.0 , Load: 10K Ω Video Out Video Out Output Level:1V P-P ±0.2, Loa d: 75 Ω Unbalanced Negativ e Power AC100-240V  50/60Hz Power Consumption >15W Dimension 200mmX154mmX41mm Weight About 1.0 Kg DESIGN AND SPECIFICATIONS ARE[...]

- 23 -[...]