Philips OR7200 manuale d’uso

OR7200 Register your pr oduct and get support at User manual[...]

User Manual OR7200 2 se c.[...]

User Manual OR7200 2 se c.[...]

2 se c.[...]

2 se c. DA B+[...]

2 se c. DA B+[...]

[...]

Congratulations on your purchase, and welcome to Philips! T o fully benet from the suppor t that Philips offers, register y our product at www .philips.com/welcome. 1 Safety Read and under stand all instr uctions before you use this product. If damage is caused by failure to follo w the instr uctions, the war r anty does not apply . Risk of elec[...]

• Never expose the product to rain, water , sunshine, or excessive heat. • Av oid force coming onto power plugs. Loose power plugs can cause arcing or re. Risk of injury or damage to the product! • This product shall not be exposed to dripping or splashing! • Do not place any sources of danger on this product (e.g. liquid lled objects[...]

• a BS 1362 approval, and • the AST A approval mark. Contact your dealer if y ou are not sure about what type of fuse to use . Caution: T o confor m with the EMC directive (2004/108/EC), do not detach the plug from the power cord. How to connect a plug The wires in the power cord are colored as f ollows: blue = neutral (N), brown = live (L). If[...]

5 Set the clock (Fig. 3) 1 In standby mode, press and hold the knob for 2 seconds. » (12-hour time format) or (24-hour time format) blinks. 2 T urn the knob to select a time format, and then press the knob to conrm. » Hour digits blink. 3 T urn the knob to set the hour , and then press the knob to conrm. » Minute digits blink. 4 T urn the [...]

Sear ch for a radio station automatically Press SCAN to activate the auto search. » After a strong station is detected, the search stops and the radio station is broadcast. Sear ch for a radio station manuall y T urn the knob until the frequency of target r adio station is display ed. Store radio stations automaticall y (Fig. 4) Press and hold SCA[...]

Pr ogram radio stations manually 1 T une to a radio station. 2 Press the PR OGRAM button to activate the programming. 3 T urn the knob to select a preset sequence number . 4 Press the knob to conrm. » The radio station is stored with the selected sequence number . 5 Repeat steps 1-4 to program more r adio stations. • T o tune to a preset r ad[...]

• Program type such as [NEWS] (news), [SPOR T] (spor t), [POP M] (pop music)... • Program ser vice • Mono/Stereo • Time • Date RDS program types Program type Description Program type Description NEWS News ser vices FINANCE Finance AFF AIRS P olitics and cur rent affair s CHILDREN Children's programs INFO Special information programs [...]

MOR M Light music FOLK M Folk Music LIGHT M Light classical music DOCUMENT Documentary CLASSICS Classical music TEST Alar m T est O THER M Special music programs ALARM Alarm WEA THER W eather Adjust FM settings 1 In FM mode, press MENU to access FM menus. 2 T urn the knob to toggle through the menus. Scan setting 1 Press the knob to access sub-menu[...]

Audio setting 1 Press the knob to access sub-menus. 2 T urn the knob to select an option. • <Stereo allow ed> : Allow stereo output even if the station transmits weak stereo audio signals. • <For ced mono> : Conver t stereo signals to monophonic output even if the station transmits strong stereo audio signals. 3 Press the knob to co[...]

7 Listen to D AB radio stations Note • For optimal reception, fully extend the antenna and adjust its position. • Y ou can progr am a maximum of 30 DAB radio stations. • Check with local retailer or go to www .W or ldDAB.or g for applicable D AB r adio frequencies in your area. For the rst time use (Fig. 5) 1 T urn the SOURCE knob to switc[...]

Tip • Y ou can re-scan to update the list of stored stations (see " Use DAB menus " > " Re-scan for stations "). • Y ou can tune to a station manually (see " Use D AB menus " > " T une to a station manually "). About special symbols Some symbol may be display ed before the name of a station. • H: [...]

Note • If you store a radio station with the sequence number of another one, the ear lier one is overwritten. Displa y D AB information On the display of D AB broadcasting, the r st line shows station name, and the second line shows the ser vice information for the cur rent station. Press INFO repeatedly to cycle through the follo wing informa[...]

T une to a stored station 1 Press the knob to access the list of stored stations. • If no D AB station is stored, the product star ts automatic search. 2 T urn the knob to select a station. 3 Press the knob to star t listening. Re-scan for stations Full scan is used to perform a wide r ange search for D AB r adio stations. Press the knob to star [...]

T une to a station manually With this feature, you can tune to a specic channel/frequency manually . In addition to antenna or ientation for better radio reception, the optimal reception can also be obtained with this feature. 1 Press the knob to access the station list. 2 T urn the knob to select a station from 5A to 13F . 3 Press the knob to c[...]

2 T urn the knob to select an option. • <DRC off> : No compensation applied. (The aster isk indicates the current setting.) • <DRC low> : Medium compensation applied. • <DRC high> : Maximum compensation applied. 3 Press the knob to conrm the option. Remove in valid stations This option lists active stations and remo ves a[...]

2 T urn the knob to select a sub-menu. • For details, refer to the section ‘ Use system menus ‘. 8 Use system menus Use the system menus to • check the version of cur rent software of this product, • upgrade the software , and • reset the product to factor y default status. Check the curr ent software version Press the knob to display t[...]

Upgrade the software 1 Go to www .philips.com/suppor t. 2 Search for suppor t infor mation about your product with “ OR7200/10 “ as the keyword. » When an upgrade packet is available, the link of “ Firmware Upgrade Readme File “ is accessible. The exact wording of this link name may var y in different languages. 3 Click the link of “ Fir[...]

3 Play the external device (refer to its user manual). 10 Adjust the v olume T urn the knob. 11 T roubleshooting W arning • Never remov e the casing of this product. T o keep the war ranty valid, never tr y to repair the product your self. If you encounter problems when using this product, check the following points before requesting service . If[...]

Poor radio r eception • Due to the interference from other electrics or building obstacles, the signals become weak. Move the product to a place free of interference. • Make sure that the antenna is full y extended. Adjust the position of the antenna. Clock setting is erased. • P ower has been interr upted, or the A C power cord has been disc[...]

T uner T uning Range FM: 87.50 - 108.00 MHz; D AB: 174.928-239.200 MHz T uning grid 50 kHz D AB sensitivity (EN50248) < -95 dbm T otal Har monic Distor tion < 2% Signal to Noise Ratio > 50 dBA Number of preset radio stations 30 (FM), 30 (D AB) Speak ers Speaker Impedance 4 ohm Speaker Driver 2 X 3" full range Sensitivity >82 dB/m/W[...]

13 Notice Any changes or modications made to this device that are not expressly approv ed by Philips Consumer Lifestyle may void the user’ s authority to oper ate the equipment. Compliance This product complies with the radio interference requirements of the European Community . This is CLASS II apparatus with double insulation, and no protect[...]

Envir onmental information All unnecessar y packaging has been omitted. W e hav e tried to make the packaging easy to separate into three mater ials: cardboard (box), polystyrene foam (buff er) and polyethylene (bags, protective foam sheet.) Y our system consists of mater ials which can be recycled and reused if disassembled by a specializ ed compa[...]

All registered and unregistered trademar ks are proper ty of their respective owners. © 2012 Koninklijke Philips Electronics N.V . All rights reser ved. OR7200_10_UM_V1.0[...]