Panasonic TH70LF50U manuale d’uso

TH - 70LF50U TH- 80LF50U Model No. Operating Instructions FULL HD LCD Display English Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference.[...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within [...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat sou[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new LCD Display . T o obtain maximum benefit from your set, please r ead these Instructions before making any adjustments, and r etain them for futur e r eference. Retain your pur chase r eceipt [...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) CAUTION When using the LCD Display Do not bring your hand[...]

7 Safety Precautions W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which n eutral detergent has been diluted 100 time[...]

8 + - + - Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity (+ and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Disposal of batteries should be in an environment-friendly manner . Observe the following precautions: 1. B[...]

9 Ceiling Suspension Y ou can install the Display by attaching commercially available eyebolts (M10) to it and suspending it from the ceiling, etc. Eyebolt mounting positions (for horizontal installation) Eyebolt mounting positions (for vertical installation) Notes: • Suspension and installation should be performed by an installation professional[...]

1 2 10 Plug the AC cord into the display unit. Plug the AC cord until it clicks. Note: Make sure that the AC cord is locked on both the left and right sides. AC cord  xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  [...]

11 Connections V ideo equipment connection Ex. TH-80LF50U A V IN HDMI HDMI Input T erminal (see page 12) AUDIO IN (COMPONENT / RGB) Connect the audio output of a device connected to COMPONENT/ RGB IN. (see page 12) AUDIO IN (DVI-D / PC) Connect the audio output of a device connected to DVI-D IN, PC IN. (see page 13, 14) AUDIO IN (COMPOSITE) Connect[...]

12 R L R L AUDIO OUT AUDIO OUT RGB OUT Y P B P R OUT VIDEO OUT HDMI A V OUT Connections VIDEO, COMPONENT / RGB IN and HDMI connection Note: Additional equipment, cables and adapter plugs shown are not supplied with this set. RCA-BNC Adapter plug RCA-BNC Adapter plug DVD Player VCR Computer RGB Camcorder DVD Player Notes: • Change the “COMPONENT[...]

DVI-D IN, DVI-D OUT connection Connections 13 Stereo mini plug (M3) Shared with PC IN. DVI-video cable (Within 5 m) PC with DVI-D video out Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S. data 2- 13 2 T .M.D.S. data 2+ 14 +5 V DC 3 T .M.D.S. data 2 shield 15 Ground 4 16 Hot plug detect 5 17 T .M.D.S. data 0- 6 DDC clock 18 T .M.D.S. data 0+ 7 D[...]

14 PC Input T erminals connection Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 30 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (However , the image will not be displayed properly if the signals exceed 1,200 lines.) • The display resolution is a maximum of 1,440 × 1,080 dots when[...]

6 7 8 9 1 3 4 5 2 * * * (Female) (Female) (Female) (Female) 15 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. • When using daisy chain, set “[...]

16 Connections Basic format for control data The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order . If there are no parameters, then the parameter signal does not need to be sent. Start (02h) 3-character command (3 bytes) Colon Parameter(s) (1 - [...]

Power switch 17 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Display . Connecting the plug to the W all Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst. Press the Power switch on the Display to turn the set on: Power-On. Power Ind[...]

PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99 : 99 SET PRESENT TIME OF DA Y 99 : 99 DA Y MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99 : 99 SET PRESENT TIME OF DA Y 10 : 00 DA Y TUE English (UK) Deutsch Français Italiano Español ENGLISH (US)  OSD LANGUAGE 18 When  rst switching on the unit Following screen will be di[...]

19 Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display . Input signals will change as follows: PC HDMI Component* VIDEO DVI HDMI: HDMI input terminal in A V IN (HDMI). VIDEO: Video input terminal in VIDEO. Component*: Component or RGB input terminal in COMPONENT/RG[...]

20 INPUT MENU VOL ENTER/ + / - / Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 24) Normal Viewing PICTURE SET UP SOUND POS. /SIZE V olume Adjustment V olume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move t[...]

21 Basic Controls Standby (ON / OFF) button The Display must  rst be plugged into the wall outlet and turned on at the power switch (see page 17). Press this button to turn the Display On, from Standby mode. Press it again to turn the Display Off to Standby mode. ACTION button Press to make selections. ASPECT button Press to adjust the aspect. ([...]

22 ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: [from the unit] Right side surface Note: The aspect mode is memorized separately for each input terminal. Note: Be aware that if you put the display in a pu[...]

2 EXIT 2 1 EXIT × 1 × 2 × 3 × 4 23 Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. Notes: • When power goes OFF (including “Off [...]

24 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press to select. (Example: PICTURE menu) MENU VOL + / - / Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SOUND POS. /SIZE SET UP 2 Select the item. 100 70 50 50 50 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS PI[...]

OFF 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE CLOCK PHASE H-SIZE 1:1 PIXEL MODE DOT CLOCK 0 0 0 0 Note: Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode. 25 Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adju[...]

26 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values (except “CLOCK PHASE” and “DOT CLOCK”) are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) H-POS Adjust the horizont[...]

100 70 50 50 50 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS PICTURE MENU COLOR PICTURE BACKLIGHT TINT ADV ANCED SETTINGS COLOR TEMP NORMAL SHARPNESS 50 27 Press the left or right button to switch between modes. ST ANDARD For viewing in standard (evening lighting) environments. DYNAMIC For viewing in brighter environments. CINEMA For use in viewin[...]

28 PICTURE Adjustments ADV ANCED SETTINGS Notes: • “COLOR” setting can be adjusted for Video input signal. • Y ou can change the level of each function (BACKLIGHT , PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The setting details for ST ANDARD, DYNAMIC and CINEMA respectively are memorized separately for each inp[...]

0 0 0 SOUND NORMAL NORMALIZE ST ANDARD 1/2 OFF TREBLE AUDIO MENU BALANCE BASS SURROUND 29 SOUND Adjustment Note: BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2[...]

99 : 99 MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99 : 99 SET PRESENT TIME OF DA Y DA Y 2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP NETWORK SETUP MENU DISPLA Y DURA TION 15 S MENU TRANSP ARENCY 20 30 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Display ON or OFF . Before attempting T imer [...]

ON POWER ON 12 : 00 VIDEO SET UP TIMER DA Y POWER MODE TIME INPUT TIMER FUNCTION PROGRAM 1 MON PRESENT TIME OF DA Y MON 0 : 03 31 SET UP TIMER PRESENT TIME SETUP / SET UP TIMER Set the program for turning the power ON/OFF and select the input signal at the speci ed time. Up to 20 programs can be set. [Setting Example] Program 1, Every Monday , 1[...]

SCREENSA VER ST ART MODE OFF PRESENT TIME OF DA Y MON 0 : 02 1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) 32 Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSA VER [...]

SCREENSA VER ST ART MODE FINISH TIME ST ART TIME TIME OF DA Y 6 : 15 12 : 30 PRESENT TIME OF DA Y MON 15 : 00 SCREENSA VER ST ART MODE SA VER DURA TION SHOW DURA TION INTERV AL 12 : 00 3 : 00 PRESENT TIME OF DA Y MON 15 : 00 SCREENSA VER ST ART MODE SCREENSA VER DURA TION ST ANDBY AFTER SCR SA VER 6 : 15 PRESENT TIME OF DA Y MON 15 : 00 2 1 3 1/2 S[...]

1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) 34 NO ACTIVITY POWER OFF Press to select the menu to adjust. Press to select “ENABLE” or “DISABLE”. Press to exit from SET UP . When this function is set to “ENABLE”, the power i[...]

1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) ECO MODE CUSTOM: The menu of power consumption reduction is individually set. ON: The following  xed values are set to the menu of power consumption reduction. Individual setting is not a[...]

1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) Press to display the SETUP menu. Press to select INPUT LABEL. Press to display the INPUT LABEL screen. Press to select image input. Press to change input label. 1 2 3 VIDEO Component INPUT L[...]

37 Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Press to display the SET UP menu. Press to select “MENU DISPLA Y DURA TION”. Press to adjust the display duration. Press to select “MENU TRANSP ARENCY”. Press to adjust the transparency . Press to exit from adjust mode. Selectable lan[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP NETWORK SETUP MENU DISPLA Y DURA TION 15 S MENU TRANSP ARENCY 20 38 By lining up the Displays in groups, for example, as illustrated below , an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display number to dete[...]

39 SET UP for MUL TI DISPLA Y Item Details LOCA TION Select the required arrangement number . (A1-E5 : Refer to the following) Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 4 ) ( 4 × 2 ) ( 5 × 5 ) A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1 D2 D3 D4 D5 E1 E2 E3 E4 E5 Press to exit from adjust mode. 4 Y [...]

1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) 40 SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB IN terminal. Y, P B , P R signals “COMPONENT” RGB signals[...]

3D Y/C FIL TER ON 1/2 SIGNAL INPUT LABEL ECO MODE SETTINGS WOBBLING SET UP OFF COMPONENT/RGB-IN SELECT RGB SCREENSA VER NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) 3D Y/C FIL TER COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] NOISE REDUCTION OFF 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFF HDMI RANGE AUTO H-FREQ[...]

3D Y/C FIL TER COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE 1024 ×768 42 3:2 PULLDOWN COLOR SYSTEM Select SIGNAL from the “SET UP” menu during Video input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” . Press to select each function[...]

() NOISE REDUCTION OFF 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFF HDMI RANGE AUTO 43 Note: NOISE REDUCTION can be adjusted while a Video or Component signal is being applied. SET UP for Input Signals NOISE REDUCTION Press to select “NOISE REDUCTION”. Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”. AUTO: NO[...]

H-FREQ. V- F R E Q . kHz Hz 63.98 60.02 SIGNAL FORMA T 1280×1024/60 H-FREQ. V -FREQ. kHz Hz 63.98 60.02 DOT CLOCK FREQ. MHz 108.0 SIGNAL FORMA T 1280×1024/60 44 SET UP for Input Signals Displays the frequency and the type of the current input signal. This display is valid only for COMPONENT/RGB/PC and Digital input signal. Display range: Horizont[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP NETWORK SETUP MENU DISPLA Y DURA TION 15 S MENU TRANSP ARENCY 20 --:--:--:--:--:-- DHCP NETWORK SETUP SA VE 0 192.168. 0. 8 255.255.255. 0 192.168. 0. 1 1024 AUTO RS-232C OFF SUBNET MASK LAN SPEED GA TEWA Y IP ADDRESS PORT CONTROL I/F SELECT NETWORK ID MAC ADDRESS Network Setup Make t[...]

Options 1/3 Initial input On screen display Input Search On Off Off Off 0 0 Maximum VOL level Initial VOL level Off Input lock Off Button lock Off Remocon User level Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID --- Serial Daisy Chain Off Studio W/B 2/3 3/3 Options Off Off Clock Display Slot pow[...]

47 Item Adjustments Button lock Off On MENU&ENTER Off: All the buttons on main unit can be used. MENU&ENTER: Locks MENU and buttons on main unit. On: Locks all the button on main unit except the Power switch. Sets Button lock with the unit buttons in the following procedure. Off: Press + / four timesPress INPUT four timesPress - / fou[...]

48 Normalization When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again. Press the - / button on main unit together with button on the remote control and hold for more than 5 seconds. The[...]

49 Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 45) When “LAN” is set, power indicator lights orange under the condition of po[...]

50 Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below . PJLink?[...]

51 Unit Setup Set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 45) Computer Setup Disable the proxy server settings and enable JavaScript. Y ou can use a Web browser to control the unit and set up a network and password. Access to the T OP screen of the Web browser control using a W eb b[...]

52 Using W eb Browser Control TOP screen structure of the Web browser control After logging in, the T OP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC CONTROL BASIC CONTROL screen is displayed. (see below) OPTION CONTROL OPTION CONT[...]

53 Notes: • T o use a DHCP server , make sure the DHCP server is started. • During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GA TEW A Y values cannot be entered. • When the set values are changed properly , “NETWORK SETTING CHANGED.” message and the changed set items are displayed. Item Details DHCP Set to ON when a DHCP server [...]

54 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

55 Applicable input signals * Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) RGB IN (Dot clock(MHz)) PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) HDMI 1 640x400@70Hz 31.46 70.07 * (25.17) * (25.17) 2 640x480@60Hz 31.47 59.94 * (25.18) * (25.18) * (25.18) * 3 640x480@72Hz 37.86 72.81 * (31.5) * (3[...]

56 Applicable input signals Video signals (VIDEO) Signal name Horizontal V ertical frequency (kHz) frequency (Hz) 1 NTSC 15.73 59.94 2 P AL 15.63 50.00 3 P AL60 15.73 59.94 4 SECAM 15.63 50.00 5 NTSC 4.43 15.73 59.94 6 P AL N 15.63 50.00 7 P AL M 15.73 59.94 * Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency [...]

57 This function allows you to reset the unit to the factory setting. 1 4 Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press for more than 3 seconds. [from the unit] 1 Press the MENU button till the SET UP menu is displayed. 2 Press the V olume Up “+” or Down “–” button to select “OSD LANGUAGE”. 3 Press and ho[...]

58 TH-70LF50U TH-80LF50U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Rated Power Consumption 260 W 380 W Stand-by condition 0.5 W 0.5 W Power off condition 0.3 W 0.3 W LCD Display panel 70-inch V A panel (LED backlight), 16:9 aspect ratio 80-inch V A panel (LED backlight), 16:9 aspect ratio Screen size 60.5” (1,538 mm) (W) × 34.0”[...]

59 <Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.) Copyright © 1980, 1986, 1993 The Reg[...]

USA only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www .panasonic.com/environmental or call 1-888-769-0149. Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America Executive Of ce :[...]