Palsonic TFTV380 manuale d’uso

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 38CM CORDLESS REMOTE LCD TV/MONITOR MODEL: TFTV-380 OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 3250 Standards Australia APP No: N1734[...]

Contents Congratulations on your purchase of this Palsonic LCD TV/MONITOR. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV/MONITOR. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may [...]

Important Safety Cautions 2 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or nea[...]

3 This TV set can be operated on a power of ~240V 50Hz or 12V DC power. You must not use a power supply of any other type. When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed prop[...]

To select input signal Channel up Channel down Volume up Volume down enter into MENU Identification of controls 4 Front SOURCE CH + CH - VOL + MENU VOL -[...]

Power switch AV input (VIDEO, AUDIO L/MONO, R) Antenna input Earphone jack PC audio line in S-video input VGA input DC power input 5 Back[...]

Sleep timer Volume down Quickly adjust picture To enter into MENU Signal input select Direct channel select Power on/Standby Channel down Picture mode select Volume up On-screen display Channel up Previous channel Clock/Timer setting Auto correct picture in VGA input mode Sound Mute Identification of controls (continued) 6 Remote Control[...]

Effective remote range Battery installation 7 Please install the batteries before using the remote control unit. Notes: Install two "AA" batteries matching the +/- polarities of the battery to the +/- marks. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. Do not [...]

Installation 8 Before using this equipment, please connect the AC power adaptor correctly. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Notes: Turn off the power firstly when you connect a outdoor anten[...]

9 To audio outputs To S-video output To video output To ANT output Video equipment without S-video terminal Video equipment with S-video terminal To ANT output Connecting video/audio equipment To ANT input Y Yellow (video) White (audio L/MONO) Red (audio R) W R Y R W Y R W R W R W[...]

Installation (continued) 10 VGA interface connection To VGA output To VGA input To line out To line in Equipment with VGA interface[...]

11 Elevation adjustment You can adjust the angle of the LCD TV/Monitor as follows. The elevation can be adjusted from -5 0 to 90 0 . 90 0 -5 0[...]

SOURCE CH + CH - VOL + MENU VOL - The selected item displays in white.. Press MENU button three times Press MENU button once Press MENU button twice Press MENU button in PC mode Note: There is only one MENU page in PC mode. Menu Introduction 12 Press MENU button Press MENU button Join to page 13 Join to page 13[...]

To adjust the treble 13 In MENU operations, the CH+/- buttons are used to select item upwards or downwards; the VOL+/- buttons are used to adjust or confirm selected item. To adjust the bass To adjust brightness and contrast in VGA input mode, this adjustment doesn't effect AV or TV mode. To adjust horizontal and vertical position in VGA input[...]

SOURCE CH + CH - VOL + MENU VOL - Turning On/Off 14 Turning On Turning Off Selecting input signal 1. Press the AV button on the remote control or SOURCE button on the control panel to select input mode. You can select TV , AV , S-video or PC . 2. If you want to go to TV mode, press AV button repeatedly until TV picture displays. You can also press [...]

Fine T uning... VHFH 36 Channel searching.. VHFH 36 SOURCE CH + CH - VOL + MENU VOL - Channel Preset 15 To enter into PRESET menu Manual Search Fine tuning In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Use 0~9 digit buttons or CH+/- buttons to select a position number firstly[...]

Current channel VHFL 10 Change to 20 Skip set VHFL 10 Save SOURCE CH + CH - VOL + MENU VOL - Channel Preset (continued) 16 Channel Skipping Channel Edit You can skip unnecessary channels by using Skip function when you browse program by CH+/- buttons. Use 0~9 digit buttons or CH+/- buttons to select a position number firstly, then enter into PRESET[...]

MENU VOL - SOURCE CH + CH - VOL + - Using CH+/- button Channel Select 17 Use 0~9 digit buttons to select one-digit channel number. Press 0-9 direct channel selector. Press -/-- button to display "-". To select two-digit channel: Press CH+ button, the channel number increases; Press CH - button, the channel number decreases. Press this but[...]

SOURCE CH + CH - VOL + MENU VOL - Picture Adjustment 18 Adjusting picture 1. Press MENU button to display Picture menu. 2. Press CH+/- button to select item. 3. Press VOL+/- button to adjust the selected item. * Note: The item Color Hue is for NTSC only. The adjustment settings are stored in the User mode. There are three preset picture mode and on[...]

SOURCE CH + CH - VOL + MENU VOL - Setting Blue Background System Setting 19 Setting Language Press MENU button twice to display SYSTEM menu and select Blue Background item by CH+/- button. Press VOL+ or VOL- button to select Enable or Disable . If is you set the Blue Background item to Enable , when there no signal or the signal is too poor, then a[...]

Sleep 30 T urn off 0:29 Status:T oday SOURCE CH + CH - VOL + MENU VOL - Use MUTE button Other Functions 20 Use CLOCK button Press button to mute the sound. If you want to cancel sound muting, you can press this button again or press VOL+/- buttons. Press the CLOCK button, the CLOCK menu appears. Use CH+/- to select hour or minute (the select item d[...]

SOURCE CH + CH - VOL + MENU VOL - To enter into PC mode Adjustments in PC mode 21 Repeatedly press AV button on the remote control or SOURCE button on the control panel until the screen display PC, which indicates that the set is in PC mode. Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the [...]

SOURCE CH + CH - VOL + MENU VOL - Adjustments in PC mode (continued) 22 Adjusting bright and contrast You can adjust bright and contrast in PC mode and this adjustment does not effect the bright and contrast in TV and AV mode. When a nonstandard signal input to the set and the picture may not be in the screen centre. Now you can adjust its horizont[...]

Trouble shooting 23 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Power is not turned on. Poor colour, poor tint. Spots appear on the screen. Stripes appear on the screen. Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted. Possible i[...]

Specifications Power Supply for AC adaptor: Power Supply of this TV set: Power Consumption: Dimensions (mm): Gross Weight (kg): SCREEN (cm): TV system & channel range. SYSTEM PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K Colour system: Sound output: Accessories AC 35W 585 (W) x 515 (H) x 257 (D) 7.5 38 ~240V 50Hz DC 12V VHF 1-12 2-12 2-12[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L1513-01[...]