Palsonic 7118 manuale d’uso

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 71CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 7118 OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899[...]

. . 1. Digital Color Transient Improver (CTI) Enhance the tint and make the original picture brighter and fresher 2. 3H digital comb filter To attain the complete separation of brightness and colour signals. To reduce colour interface, blurry and dotted interruptions. To make the picture clearer. 3. Digital Luminance Transient Improver (LTI) Adopts[...]

Congratulations on your purchase of this colour Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features ................................[...]

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow caution[...]

Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connect[...]

Appearance Front view Back view 4 VIDEO VOLUME- VOLUME+ SYSTEM CHANNEL CHANNEL MENU VIDEO 3 input terminals {S-VIDEO, VIDEO, AUDIO, L/MONO, R} MONITOR output terminals {VIDEO, AUDIO L/MONO, R} Earphone jack Antenna input VIDEO 1 input terminals {S-VIDEO, VIDEO, AUDIO, L/MONO, R} VIDEO 2 input terminals {S-VIDEO, VIDEO, AUDIO, L/MONO, R}[...]

The Remote Controller 5[...]

Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red; If there are pictures appearing on the screen, the indicator is yellow. If no picture appears on the screen, push the power button on the remote controller to turn the set on, the indicator turns to yellow. Without using the remote c[...]

1.3 Press the or button to enter into the sub-menu of Presetting the channels There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. 1. To enter into menu 1.1 Press the MENU button to enter into the main menu. 1.2 Press men[...]

Press the button select SEARCH 3. MANUAL SEARCH If AUTO - SEARCH cannot preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers - please make use of MANUAL SEARCH. Press the menu item select button or to select MANUAL SEARCH (the caption on the screen are red). Press the or button to ent[...]

When you want to store and memorise another channel with another position, repeat steps 3.3, 3,4. 4. Skip unwanted program numbers After presetting the channels, you can skip unwanted program numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwanted program position of the unwanted channels . Press the or button to sel[...]

6. The setting of colour and sound system Press the SYS button, the screen will display colour and sound system. If the displaying colour is abnormal, press the or button to select COLOR, then press the or button to select the right colour system. Every time you press or button, the colour system will change in the sequence on the right. Press the [...]

Sound Selection Mode If the broadcasting TV station is transmitting stereo sound in NICAM mode or IGR (stereo) mode, on the upper right comer of the screen will display an indication which is listed in the following table. You can press the " " button repeatedly to select stereo sound or language. If you experience noise of any stereo/bil[...]

Press the | button, you can quickly select two modes of picture and sound quality standard: One is standard mode (on the screen displays (STANDARD) ; The other is personal select mode (on the screen displays "MEMORY"). 1. Picture adjustment Complete the following steps and you will adjust the picture quality. Press the MENU button, on the[...]

2. Sound adjustment Complete the following steps and you will adjust the sound quality. Press the MENU button to display the main menu. Press the or button to select SOUND , then press the or button to en- ter into the sub - menu of SOUND. Press the or button to select your required sound adjustment item (the caption on the screen is red), then pre[...]

Note: During the process of picture and sound adjustment, every time you press the button, STANDARD/ MEMORY is displayed on the screen alternatively. When picture and tone quality are adjusted to your desired level, the mode is in memory mode. SOUND MEMORY Press or button to select S.WOOFER ON To make use of super woofer, complete steps 2.1 & 2[...]

Press the or button to select OFF TIME. Pressing the or button set ONCE/EVERY OFF TIME. Every time you press the or button, it will change in the sequence of OFF EVERY ONCE OFF EVERY ------. When the setting is ONCE or EVERY OFF TIME, press the or button to select time to turn off the set, then press the or button to set the time to turn off the TV[...]

Press the or button to select ON TIME. Pressing the or button set ONCE/EVERY ON TIME. Every time you press the or button , it will change in the sequence of OFF EVERY ONCE OFF EVERY......... When the setting is ONCE or EVERY ON TIME, press the or but- ton to select time to turn on the set, then press the or button to set the time to turn on the TV.[...]

External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to the owner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment[...]

To select the input press the VIDEO button on the TV set or the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays programme number, or press direct channel select button or the CH button. VIDEO 1 VIDEO 2 VIDEO 3 If the colour[...]

Troubleshooting Symptoms No power, red indicator is not lit up Poor colour, poor tint Spots appear on the screen Stripes appear on the screen Double images or "ghosts" Snowy picture The remote controller does not work The drawer of the control buttons opens slowly The drawer of the control buttons can not open TV cabinet creaks Check the [...]

Specifications Power supply: Power consumption: Dimension(mm): Weight: CRT: TV system & channel range System PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K VHF 1-12 2-12 2-12 2-13 2-12 1-12 A-6-A-l,A-W,AA-FFF X ~ Z + 2, S1~S4 Colour system: Sound system : Sound output: Accessories : NICAM728: B/G 5.5/5.85 D/K 6.5/5.85 IGR(2 - Carrier) : B/[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-76623-01[...]