Optoma 7POP manuale d’uso

Operation Manual Before using this device, please make sure the instructions has been read and understood especially the “Safety” chapter. Please keep this manual in a good condition for future reference. Device number is very important for quality management. Please check the device number when you buy this device. Thank you for y our purchase[...]

Preface Getting start Set-up Install Adjustment Getting Help 2 Preface Table of contents Preface…………………………..2 T able of contents............ . .............. 2 Caution for Safety ........... .............. 4 Caution for correct usage ........... 12 T erminology ..................... .......... ..14 The process of using the devic[...]

3 Outlook of the operational manual  Outlook of symbols in the manual. Caution : watch out for the operation. Memo : limits of function and usage are written as reference.  About the contents of this manual. z This is a copyrighted material. Any use of this copy without proper permi ssion is forbidden. z The devices from other co mpanies m en[...]

Preface Getting start Set-up Install Adjustment Getting Help 4 Caution for Safety There are many signs writt en in the manual or shown in the device. These signs are for the safety of customers, su rrou nding people and properties. Please pay careful attention to these signs before you read thi s manual. Warning: This signs means: sho uld this sign[...]

5 Warning When abnormality takes place  If the following situations occur, please do not use the device because fire or electric shock ma y take place. • When smoke or strange sm ell occurs. • When videos or the sounds can’t be played. • When water or objects are get inside th e device. • When the cabinet is dropped and dama ged. • W[...]

Preface Getting start Set-up Install Adjustment Getting Help 6 Caution for Safety (continued) Warning About handling  Do not remove the rear cov er or remodel the device If the supply voltage inside is high, fire or electric shock may break out. Please return the device to stores for inner pa rt examination and repair.  Do not place this devi[...]

7 About power cord  Do not use the power cord w ith devices other tha n Sign Show 7POP Do not use the power cord with devices other than Sign Show 7POP, because it may cause fire or electri c shock.  Do not damage the electric cord Do not damage the power cord, because it may cause fire or electric shock. • Do not modify the power cord. •[...]

Preface Getting start Set-up Install Adjustment Getting Help 8 Caution for Safety (continued) Caution! About power cord, power plug and AC adapter  Please use the exclusive AC adapter, or fire or electric shock may break out.  Please disconnect all links with machines and then connect the po w er plug, or fire o r electric shock may break out[...]

9 About handling  Do not put the device in the follo w ing places be cause it may cause fire or electric shock. • The place with dust or wetness • The place with smoke or heated air , su ch as close to humidifying or cooking place. • The place close to heat appliance s • Window-closed automobiles or pl aces with direct sunray. • The pl[...]

Preface Getting start Set-up Install Adjustment Getting Help 10 Caution for Safety (continued) Caution! About moving  Do not move this device when there a re objects onto it. If the objects fall down, people may get hurt.  When moving the device, please unpl ug the power or connecting cord. If moving the device without unplug, fire or electri[...]

11 About falling-proofing  In order to prevent falling, please take the follo wing measures People may get hurt because of falling caused by earthquake. Please make use of the stand hole at back side a nd fix the device to the wall or pillar firmly. Make sure to choose the firm place. * Please make good use of marketing devices, such a s wire or[...]

Preface Getting start Set-up Install Adjustment Getting Help 12 Places for safekeeping or use of device  Please do not put the device at the following places Because it may cause malfunction • Place beyond the permissi on operating temperature (0 ℃ ~40 ℃ ) • Place beyond the permissi on operating humidity (10%~80%) • Place with high ma[...]

13 About handling  Do not excessively use the device The reciprocal heat or so unds can cause malfunction or damages, which can lead to fire.  Do not put any containers w ith water, such as vase or cup because it may cause fire or electric shock  Do not insert any object inside because it may cause fire or electric shock.  Please use th[...]

Preface Getting start Set-up Install Adjustment Getting Help 14 <Front View> 3 4 2 1 <Base View with cover removed> 6 7 8 5 <Rear View> 9 Speakers The sound can be played from SD memory card Power light/ timer light The light will be on for the following situation: Power on Green light Timer set on for operation Orange light Timer[...]

15 Attention light To light up the rear piece of the device. The battery cover Remove battery cover at the following situation:  To alter the set-up by button  To change the batteries U Button  To set up the menu, it is used moving the cursor up (  to see page 25) To show the picture again, it is used to make it brighter. (  to see p[...]

Preface Getting start Set-up Install Adjustment G etting Help 16 The process of using the device Step 1 Please prepare the acce ssories and tools you need ---------- ------------------------ ----------------- page 17 T Step 2 Please insert the SD memory card into the device ----------------------------------------------------- page 18 T Step 3 Plea[...]

17 Getting st art Step 1: Accessories and tools  Accessories included with the device  Things to prepare Memo: • USB memory has to save the contents which are made by CD-R. If there isn’t any file, it can’t be transmitted into SD memory card. • If the accessory is not enough, please ask the selling store s and sorry for the inconvenie[...]

Preface Getting start Set-up Install Adjustment G etting Help 18 1. Take off the rear cover: remove the screws by using the screwdriv er Memo: • The screws have a function of missing-proof, please d o not take them off the rear cover 2. Insert the SD memor y card into the device Please put the label side of SD memory card as down side Please inse[...]

19 Step 3: Connect device with AC adapter • When connecting device wi th AC adapter, the power will be on • When plugging the DC plug into the DC terminals, please turn the DC plug sideways as the followi ng picture. Please insert into AC outlet DC terminal DC plug[...]

Preface Getting start Set-up Install Adjustment G etting Help 20 Notice: • Formatting an used SD memory card will erase all the saved files. • The SD memory card will be unusable by computers if formatting is done on this device.  Buttons used for formatting • Up, down, left, right button • Button for “replay from start”( use “set [...]

21 3. To display the capacity of memory Select “memory capacity” by up or down button, and then press the set button. <Memory cap acity screen> 4. To display the formatting screen Select the “initialization” by up or down button, and then press the set button. < Format screen> 5. To practice the formatting Select the “yes” b[...]

Preface Getting start Set-up Install Adjustment G etting Help 22 6. Return to th e menu screen Please select “ return ” after completing formatting and then press the set button. ⇒ In the screen of memory card capacity, the capacity of formatted SD memory card will display. <Memory card capacity screen> T ⇒ Select the “back” and t[...]

23 <To speculate the transmitting time from USB memory> Content files Transmitted time 10 MB About 10 seconds 50 MB About 50 seconds 100 MB About 1 minute and 40 seconds 250 MB About 4 minutes and 10 seconds 500 MB About 8 minutes and 20 seconds * This is the speculation for transmitting time. The time depends on the type of USB memory and SB[...]

Preface Getting start Set-up Install Adjustment G etting Help 24 1. To turn on the po w er Please make sure that the power light is green or orange color. 2. To insert the USB m emory into the USB terminal Please take off the base cover of terminal, and insert the USB memory into USB terminal. * Please leave the OSD menu first. USB terminal USB mem[...]

25 The message will show “A CONFIGURATION FILE IS FOUND!” Use the same steps as you woul d in updating content files to update the configuration files. ⇒ The message will be shown as the following picture. <File replacement screen> Memo: • If the message of “must format the SD card” displays, please format the SD. memory card. ( ?[...]

Preface Getting start Set-up Install Adjustment G etting Help 26 Set-up Buttons used for set-up Please use the 4 buttons inside the cover of rear operation button. <The front of the device > The outlook of selecting item  To select the menu The selected item displays in the word of white color. <example: the state of selecting the day /[...]

27 To make sure the setting content of all content files Make sure the setting cont ent of replayi ng day or time of content files and then write the contents in the followin g table.  Timer set-up Schedule set-up (Set [mode] as “loop replay” Timer se t-up (Set [timer set-up] as “on”) Name of content files Replaying selection Starting ti[...]

Preface Getting start Set-up Install Adjustment G etting Help 28 Setting screen of OSD Setting contents Setting value (default) Assure the system The model, operation time, firm w are version can be assured * setting can't be practiced Memory capacity Make sure the space of SD memory card, capacity, range, or to initializ e the SD card Renew f[...]

29 Loop replay The replayable content ( to be set [replay] at replaying selection)can be repeatedly repla yed at the setting time of [timer setting] Mode Schedule replay The replayable content ( to be set [replay] at replaying selection) can be replayed at the setting time. loop replay , schedule replay Replay Replay the content Replaying selection[...]

Preface Getting start Set-up Install Adjustment Getting Help 30 Setting screen Setting contents Setting value (default) Starting time Setting the replay time Finishing time Setting the finishing time hour: 00~23 minute: 00~59 second: 00~59 Starting day Finishing day Set up when the repetition setting is on year: 2007~2032 month: 01~12 day: 01~31 To[...]

31 Constitution of setting screen Date/time setting screen of d t /ti Timer setting screen Schedule setting screen LED On/Off setting screen Others setting screen System setting screen Menu screen Network setting screen A uto download screen (Network Mode: Active) Web page setting screen (Network Mode: Passive) Exit[...]

Preface Getting start Set-up Install Adjustment Getting Help 32  Buttons used in network settings <The front of the device > [The screen of setting network] Setting item Example Network Mode Passive, Active IP 10.1.3.101 Mask 255.255.255.0 Gateway 10.1.3.254 DNS1 192.168.1.168 DNS2 192.168.1.167 1. To display the menu screen Please press t[...]

33 3. To set the network mode Select “Network Mode” and press the set button. ⇒ The selected item turns from white to blue. Press the left or right button to toggle “Active” or “Passive”. • Selecting “Active” will allow you to use the “Auto Download” function and upload contents to your device. • Selecting “Passive” wi[...]

Preface Getting start Set-up Install Adjustment Getting Help 34 6. To set the web page Web page settings becom e available if “Passive” Network Mode is selected in Network setti ngs. Select “Web page” using the up or down button and press the set button. ⇒ The following screen displays. <Web page settings screen> Select the item by [...]

35 and transfer the file to the device using a USB drive. File will be found after you restart the device. 1. To display the menu screen on the web Web access become s available if “Passive” Network Mode is selected in Network settings. Open a web browser on your PC and enter the IP address. IP address information can be viewed from the Web pag[...]

Preface Getting start Set-up Install Adjustment Getting Help 36 3. To set up the play menu Play menu allows you to view your schedule edit, take snap shot of your contents, and upload files to the device. Select the “Play” tab on top to open the drop down menu. ⇒ The following screen displays. Select “Schedule Edit” to view your scheduled[...]

37 5. To set up the network menu Network menu allows you to set up your network settings. Select the “Network” tab on top to view the network menu. ⇒ The following screen displays. To set up the address setting, select “Static” or “DHCP” from the “Network Type” drop down menu and enter th e values in “IP Address”, “Network M[...]

Preface Getting start Set-up Install Adjustment Getting Help 38 Auto download settings become available if “Active” Network Mode i s selected in Network setti ngs. To upload contents to your device from ftp, use a content packer to create a zip file, such as “content.zip” (please make sure that the name of zip file must not include any spac[...]

39  Button for setting <The front of the device > [The screen of setting day and time] Setting item Example Day (year/month/day) 2008/3/20 Time (hour: minute: second) 10:00:00 1. To display the menu screen Please press the left and right button simultaneously for 2 seconds. < Menu screen> 2. To display the setting screen for day and [...]

Preface Getting start Set-up Install Adjustment Getting Help 40 3. To set the date (y ear/month/ day) Select the item by using the left or right button, and then press the set button. ⇒ Setting items display in the word of blue color. T Change the setting value by using up or down button and then press the set button. ⇒ Setting value displays i[...]

41  Button for setting <The front of the device > Example To replay contents: Progra m 1, Program 2, Program 3 [Schedule setting screen] Setting item Setting example Content files (the name of content files in the SD memory card is shown) Program 1 Program 2 Program 3 Program 4 Program 5 Replaying selection “replay”: replaying contents[...]

Preface Getting start Set-up Install Adjustment Getting Help 42 1. To display the menu Please press the left and right button simultaneously for 2 seconds. <Menu scre1en> 2. To display schedule setting screen Select “schedule setting” by up or down button and then press set button. Select the “schedule setting” by up or down button an[...]

43  Buttons for setting <The front of the device >  Example The repetition of replay the contents Program 1, Program 2, Program 4 in the order everyday (Monday to Friday) from 10 AM to 8 PM. [Timer setting screen] Setting item Example Timer setting On ( forced) Starting time 10 AM Finishing time 8 PM Stop day Saturday [schedule sett ing[...]

Preface Getting start Set-up Install Adjustment Getting Help 44 1. To display the menu screen Please press the left and right button simultaneously for 2 seconds. < Menu screen> 2. To display the timer setting screen Select the [timer setting] by up or down button and then press the set button. ⇒ When the timer setting screen display, the s[...]

45 4. To set the starting time( hour: minute: second) Make sure that the setting value of [timer setting] displays in the word of white color and then press down button. ⇒ Starting time displays in the word of white color. T Select the setting item (hour: minute: second) by using left or right button, and then press set button. ⇒ Selecting item[...]

Preface Getting start Set-up Install Adjustment Getting Help 46 6. To set “ Saturday ” as stopping day Make sure that the finishing time displays in the word of white color a nd then press down button. ⇒ The setting value of [stopping day] displays in the word of white color. T Please press the set button. ⇒ The setting value displays in th[...]

47 [Schedule setting screen] Setting item Exam ple [mode] Schedule replay(forced) Content files (content files saved in the SD memory card) Program 1 Program 2 Selecting replay “replay”: replayed contents “not replay” : not replayed contents Program 1: replay Program 2: not replay [Content replay setting screen] Volume 10 Repetition setting[...]

Preface Getting start Set-up Install Adjustment Getting Help 48 1. To display the menu screen Please press the left and right button simultaneously for 2 seconds. < Menu screen> 2. To display the schedule setting screen Select the “schedule setting” by up or down button and then press the set button. ⇒ Schedule setting screen displays, [...]

49 6. To set [repetition setting] as “ every w eek ” Make sure that the setting value of [volume] displays in the word of white color and then press down button. ⇒ Select [repetition setting] and then the setting value displays in the word of white color. T Press the set button and the setting value can be changed. ⇒ Setting value displays [...]

Preface Getting start Set-up Install Adjustment Getting Help 50 9. To set up [re play due day] Make sure that the finishing time displays in the word of white color a nd the press the set button. ⇒ The “( ) Monday” of [replay due day] displays in the word of white color. T Select the day of week by using left or right button, and then press s[...]

51 [Schedule setting screen] Setting item Example mode Loop replay (forced) Content files(content files saved in the SD memory card) Program 1 Program 2 Program 3 Program 4 Program 5 Selecting replay “replay”: replayed contents “not replay” : not replayed contents Program 1: replay Program 2: replay Program 3: not replay Program 4: replay P[...]

Preface Getting start Set-up Install Adjustment Getting Help 52 1. To display the menu screen Please press the left and right button simultaneously for 2 seconds. < Menu screen> 2. To display the schedule setting screen Select the “schedule setting” by up or down button and then press the set button. ⇒ Schedule setting screen displays, [...]

53 6. To set [repetition setting] as “ every month” Make sure that the setting value of [volume] displays in the word of white color and then press down button. ⇒ Select [repetition setting] and then the setting value displays in the word of white color. T Press the set button and the setting value can be changed. ⇒ Setting value displays i[...]

Preface Getting start Set-up Install Adjustment Getting Help 54 8. To set finish ing time ( hour: minute: second) Make sure that the starting time displays in the word of white color a nd then press down button. ⇒ Finishing time (hour) displays in the word of white color. T Select the setting item ( hour: minute: second) by using left or right bu[...]

55 [Schedule setting screen] Setting item Example mode Schedule replay (forced) Content files(Content files saved in the SD memory card) Program 1 Program 2 Program 3 Program 4 Selecting replay “replay”: replayed contents “not replay” : not replayed contents Program 1: replay Program 2: replay Program 3: replay Program 4: replay <Schedul[...]

Preface Getting start Set-up Install Adjustment Getting Help 56 1. To display the menu screen Please press the left and right button simultaneously for 2 seconds. < Menu screen> 2. To display the schedule setting screen Select the “schedule setting” by up or down button and then press the set button. ⇒ Schedule setting screen displays, [...]

57 6. To set [Re peat setting] as “ off” Make sure that the setting value of [volume] displays in the word of white color and then press down button. ⇒ Select [Repeat setting] and then the setting value displays in the word of white color. T Press the set button and the setting value can be changed. ⇒ Setting value displays in the word of b[...]

Preface Getting start Set-up Install Adjustment Getting Help 58 9. To set up [Starting day](year/month/day ) Make sure that the finishing time displays in the word of white color a nd the press the set button. ⇒ [Starting day] (year)displays in the word of blue color. T Select the setting item (year/month/day) by using left or right button, and t[...]

59 Install To install the device Please install the device on the flat site by using the simple stand and foot packaged together with the device. 1. To install the simple sta nd Screw M3 screw s (accessory) into the installing hole of the device as following picture. Memo: • There are 3 stages in the installing hole of the stand. Please adjust th[...]

Preface Getting start Set-up Install Adjustment Getting Help 60 Please paste the sticker of “replay from start” to the device as the following picture. Memo: • When pressing the button of “replay from start” during contents replaying, the content files w ill be replayed from start. Please use it as occasion demands. (  page 62) To past[...]

61 Adjustment  The button for adjustment of brightness and volume <The front of the device > To adjust the brightness To adjust the brightness by up or down button during the content replaying.  Brighten the scree n Press the up button to brighten the screen.  Darken the screen Press the down button to darken the screen. To adjust th[...]

Preface Getting start Set-up Install Adjustment Getting Help 62 To adjust the volume About adjusting the volume, please go to the section of schedule setting (  page 40). However, the volume can be changed during contents replaying by using left or right button.  To louder the volume Press the left button and the volume louder.  To lower t[...]

63 Memo: • Please set [replaying from start button] “on” if the button of “replay from start” malfunctions. To use the button of “replay from start” Once pressing the button of “replay from start” during contents replaying, the content files will be replayed from start. Pl ease paste the sticker of “replay from start” for butt[...]

Preface Getting start Set-up Install Adjustment Getting Help 64 To turn on/ off the power by manual The power can be turn on/ off by manual without setting replay time. It can be used to replay the contents without timer setting or to turn off the power by force durin g replaying.  Example: ( as timer is set from 8:00 to 20:00) As the timer is o[...]

65 < Completion of content files> <PC environment for CD-R (General Layout Editor)>  OS Microsoft Windows XP 32 bit English version (service pa ck 2) * Including Microsoft. Net Fram ework2.0  Hardware • CPU: above Intel Pentium 1.0 • Memory: above 256MB • Disc capacity: about 17 MB  Corresponding format Type Corresponding[...]

Preface Getting start Set-up Install Adjustment Getting Help 66 Memo: • Please use type-CR2032 batteries. • Please adjust the date/ time again after changing the batteries. * Timer setting can be ke pt when changing batteries and keeping the power on. 1. To turn off the po wer of device Please unplug the AC adapter. Memo: • Do not turn off th[...]

67 Packaging When carrying the device, plea se pa ck it as the following picture.[...]

Preface Getting start Set-up Install Adjustment Getting Help 68 Getting Hel p Troubleshooting Before getting maintenance from professionals, take a look at the following points. Condition reason corresp onding measure The power plug ha s been slacked and been removed. Make sure to plug the power There is no power or the screen is black. The timer h[...]

69  About w arranty Please contact your local regional sales office fo r warranty information as each region may offer local or other warranty’s. Your can take your device for maintenance to selling stores or the supporting units which are written on the inner sheet. We do not support the maintenance which is beyond the warranty.  About mai[...]

Preface Getting start Set-up Install Adjustment Getting Help 70  LCD LCD panel type-7 TFT color LCD Valid range 154.08*86.58 Screen constitution 800*RGB*400 pixel Contrast: 500:1 View angle: left/right 65 degree, up 40 degree, down 65 degre e The brightness of white surface 280cd/m ( panel center, 25 ℃ ) Back light: LED  Output Sound Stereo[...]

71  Battery The battery for timer (CR2032) is attached with device * The specification and outlook may be changed without announcement.  Accessory AC adapter Power code *1 *1 Quick Start Guide *1 Sticker for button of “replay from start” *1 Stand & Screw CD-R(UM & Driver) WIRE SADDLES *1 *1 *1  Appearance and size Unit: mm * th[...]