Olympus MAUSB-10 manuale d’uso

USB Reader/Writer REFERENCE MANU AL[...]

2 Introduction Thank you for purchasing our product. This product is exclusively for reading and writing data to an xD-Picture Card/SmartMedia. Y ou can transfer large amounts of data to and from the card quickly and easily using a computer equipped with a USB port (IBM PC/A T compatibles and Macintosh). Before using this product, read this manual [...]

3 Contents Introduction .................................................................................................................................... 2 Contents ......................................................................................................................................... 3 What’ s inc luded ......................[...]

4 What’ s inc luded Make sure all the following items are included. If any items are missing, inform the shop from where you purchased this product right away . Names of parts USB connector (T ype A) Connect this to your computer ’s USB port. USB cable Quick start guides “Precautions” document MAUSB-10 Card cover The card(s) is recognized w[...]

5 Before getting started System requirements Y our computer must conform to the following minimum standards in order to use it with the MAUSB-10. ● Compatible operating systems IBM PC/A T compatible: pre-installed Windows 98/98 SE/Me/2000 Professional (referred to as Windows 2000 in this manual)/XP Power Macintosh G3/G4, Power Book G3/G4, iMac/iB[...]

6 W indows Macintosh [USB 1.1 compatible] T urn on computer . Place provided Installation CD-ROM in CD-ROM drive. *2 Install driver . *2 Restar t computer . *2 Connect to computer . Get started! *4 *1 : Windows 95/3.1/NT are not compatible. *2 : Y ou only need to perform this procedure before using the MAUSB-10 for the first time. *3 : Insert the C[...]

7 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <98/98 SE/Me ⽧ Install> T urn on your computer’s power (and connected devices) to start Windows. 2 Install the device driver <98/98 SE/Me ⽧ Install> When using the MAUSB-10 for the first ti[...]

8 <98/98 SE/Me ⽧ Install> 4. During installation, the window at right appears. * The installation time may vary , depending on your computer. 5. When the driver installation is complete, the window at right appears. Click the “Finish” button. The device driver is now installed. Once the driver has been installed, the MAUSB-10 will be re[...]

9 1. Double-click “My Computer”. <98/98 SE/Me ⽧ Install> 2. Right-c lic k “OL YMPUS”. Select “Open” from the pop-up menu. 4. Double-click “SETUP”. * The “OL YMPUS USB Reader/Writer InstallShield Wizard” window appears. Start installing by following “Install the device driver” ( 墌 p. 7). 1. Disconnect the MAUSB-10 f[...]

10 Operating the MAUSB-10 The operating procedures for the MAUSB-10 under Windows are described below . 1 Connecting to the computer <98/98 SE/Me ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] [...]

11 < 98/98 SE/Me ⽧ Operation > When the MAUSB-10 is connected to your computer , it is recognized as a “Removable Disk”. Y ou can see two “Removable Disk” icons by opening “My Computer” from the desktop. [Drive letters] The drive letters for the two “Removable Disk” icons appear in alphabetical order , with the xD-Picture Ca[...]

12 2 Inserting a card <98/98 SE/Me ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the car[...]

13 3 Removing a card <98/98 SE/Me ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. Note NEVER open the card cover , remove the card, or unplug the USB connec[...]

14 4 Copying files from a card <98/98 SE/Me ⽧ Operation> 4. Drag the file icons you want to copy and drop them onto the destination folder . * The process is the same as copying files from a floppy disk. * It is also possible to move files to another folder, erase files, or write data from another folder . (Data cannot be written to or eras[...]

15 5 Formatting a card <98/98 SE/Me ⽧ Operation> 6 Disconnecting the MAUSB-10 <98/98 SE/Me ⽧ Operation> Close all software programs that are using the card (e. g. Explorer , graphics applications), then follow the steps below . 1. Make sure that the status lamp is NOT on. * If the status lamp is on, right click the Removable Disk ic[...]

16 How to uninstall the device driver <98/98 SE/Me> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’ s USB port, then follow the steps below . * On-screen displays or messages may vary depending on the version of Windows you are using. 1. Click the “Start” b[...]

17 How to uninstall the device driver (Cont.) <98/98 SE/Me> 4. A confirmation window appears. Click “OK”. 5. The “InstallShield Wizard” window appears. 6. The window at right appears. Click the “Finish” button. 7. The window at right appears. Select “Y es, I want to restart my computer now .” if you are ready , then click “F[...]

18 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <2000/XP ⽧ Install> T urn on your computer’s power (and connected devices) to start Windows 2000/XP . T o install the device driver , log on with the user name “ A dministrator”, or use a user[...]

19 <2000/XP ⽧ Install> 4. During installation, the window at right appears. * The installation time may vary , depending on your computer. 5. When installation of the device driver is complete, the window at right appears. Click the “Finish” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store i[...]

20 1. Double-click “My Computer”. <2000/XP ⽧ Install> 2. Right-c lic k “OL YMPUS”. Select “Open” from the pop-up menu. 4. Double-click “SETUP”. * The “OL YMPUS USB Reader/Writer InstallShield Wizard” window appears. Start installing by following “Install the device driver” ( 墌 p. 18). If the installation window doe[...]

21 Operating the MAUSB-10 The operating procedures for the MAUSB-10 under Windows 2000/XP are described below . 1 Connecting to the computer <2000/XP ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Not[...]

22 <2000/XP ⽧ Operation> [Installing the hardware] 1. The “Found New Hardware Wizard” window appears when the MAUSB-10 is connected to Windows XP for the first time. Make sure that “Install the software automatically [Recommended]” is selected and click the “Next” button. * On Windows 2000, the hardware will be installed automat[...]

23 <2000/XP ⽧ Operation> 5. When the driver installation is complete, the window at right appears. Click the “Finish” button. 6. Confirm that two “Removable Disk” icons have been added by opening “My Computer” from the desktop. * The drive letters (e.g. “D:”, “E:”, etc.) used by your computer may differ depending on your[...]

24 Before connecting After connecting MAUSB-10 * In this example, the Removable Disks are recognized as the J and K drive. The drive letters (e.g. “J:”, “K:”, etc.) used by your computer may dif fer depending on your computer and/or connected optional devices. < 2000/XP ⽧ Operation > When the MAUSB-10 is connected to your computer ,[...]

25 2 Inserting a card <2000/XP ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the card is[...]

26 3 Removing a card <2000/XP ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. Note NEVER open the card cover , remove the card, or unplug the USB connector [...]

27 4 Copying files from a card <2000/XP ⽧ Operation> 1. Start up your computer . 2. Double-click “My Computer” from the desktop. 3. T o view the contents of a card, double-clic k the corresponding “Removable Disk” icon. * For information about how to locate the files you want to copy, refer to the manual for the product used to reco[...]

28 5 Formatting a card <2000/XP ⽧ Operation> [Before formatting the card] • T o format a card, log on with the user name “Administrator”, or use a user name with administrator privileges. Otherwise, formatting the card will be impossible. • If a card is going to be used with a digital camera, be sure to format it with the camera you[...]

29 6 Disconnecting the MAUSB-10 <2000/XP ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . 1. Make sure that the status lamp is NOT on. 2. Left-click the “Unplug or Eject Hardware” icon on the taskbar . 3. A message box titled “Safely remove [...]

30 How to uninstall the device driver <2000/XP> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’ s USB port, then follow the steps below . * On-screen displays or messages may vary depending on the version of Windows you are using. 1. Click the “Start” butto[...]

31 How to uninstall the device driver (Cont.) <2000/XP> 4. A confirmation window appears. Click “OK”. 5. The “InstallShield Wizard” window appears. The device driver is no longer installed. 6. The window at right appears. Click the “Finish” button. 7. The window at right appears. Select “Y es, I want to restart my computer now .[...]

32 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <Mac OS 8.6~9.2 ⽧ Install> T urn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer until installation of the device driver ([...]

33 3 Install the device driver <Mac OS 8.6~9.2 ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on the provided CD-ROM. 3. Doub le-click the “Mac OS 9” folder . 4. Doub le-click “USB Reader_Writer”. Before installation, make sure that: • Y our computer is turned on. • The p[...]

34 < Mac OS 8.6~9.2 ⽧ Install > 6. Click the “Restart” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store it in a safe place.) 5. When the Mac OS 8.x, 9.x installer starts up, the window at right appears. Confirm “Install Location”, then click the “Install” button.[...]

35 Operating the MAUSB-10 The operating procedure for the MAUSB-10 under Mac OS is described below . 1 Connecting to the computer <Mac OS 8.6~9.2 ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] [...]

36 2 Inserting a card <Mac OS 8.6~9.2 ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the [...]

37 3 Removing a card <Mac OS 8.6~9.2 ⽧ Operation> Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. 2. Make sure that the status lamp is of f, then open the card cover and pull the [...]

38 4 Copying files from a card <Mac OS 8.6~9.2 ⽧ Operation> 1. Insert a card in the MAUSB-10. * The status lamp blinks, then the card icon appears on the desktop. * The icon’s appearance may vary , depending on the card and the OS version. 2. Double-click the icon to display the files that you want to copy . * For information about how to[...]

39 How to uninstall the device driver <Mac OS 8.6~9.2> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’s USB port, then follow the steps below . 1. From the desktop, double-click the hard disk icon. Drag & Drop 5. Restart the computer to confirm uninstallati[...]

40 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <Mac OS X ⽧ Install> T urn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer until installation of the device driver ( 墌 p[...]

41 3 Install the device driver <Mac OS X ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on the provided CD-ROM. 1. Doub le-click the “OL YMPUS” icon. 2. Doub le-click the “MAUSB-10” folder . 5. The window at right appears. Click the lock icon next to “Click the lock to make[...]

42 < Mac OS X ⽧ Install > 6. Enter the administrator ’ s name and the pass- word, then click the “OK” button. 7. Click the “Continue” button. 8. Click the “Continue” button. 9. Select the disk to install on, then click the “Continue” button.[...]

43 < Mac OS X ⽧ Install > 10. Click the “Install” (or “Upgrade”) button. 11. Click the “Continue Installation” button. 12. The window at right appears during the installation. 13. Click the “Restart” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store it in a safe place.)[...]

44 Operating the MAUSB-10 The operating procedure for the MAUSB-10 under Mac OS is described below . 1 Connecting to the computer <Mac OS X ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] • Be[...]

45 2 Inserting a card <Mac OS X ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the card i[...]

46 3 Removing a card <Mac OS X ⽧ Operation> Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. 2. Make sure that the status lamp is of f, then open the card cover and pull the card(s[...]

47 4 Copying files from a card <Mac OS X ⽧ Operation> 1. Insert a card in the MAUSB-10. * The status lamp blinks, then the card icon appears on the desktop. * The icon’ s appearance may vary , depending on the card and the OS version. 2. Double-click the icon to display the files that you want to copy . * For information about how to loca[...]

48 T roubleshooting Windows The status lamp (green) does not light. A “Found New Hardware Wizard” windo w appears when you connect the MAUSB-10. The MAUSB-10 doesn’t work even after installing the driver and connecting the MAUSB-10 to the computer . “?” appear s in Device Mana g er . (This is after you have performed all the steps in the [...]

49 T roubleshooting Macintosh The status lamp (green) does not light. No card icon(s) appears on the computer’ s screen. Y ou can read a card, but not write to it. Y ou cannot write with a SmartMedia. The error message “File Sharing is invalid.” appears. The card(s) is not inserted correctly . The card cover is not closed properly . The power[...]

50 Specifications * The specifications in this manual are subject to change without prior notice. * For the latest information, visit the OL YMPUS web site (http://www .olympus.com). * 1 Some cards with ID are not generally available for purchase. Consult your nearest SmartMedia dealer for details. (OL YMPUS SmartMedia with ID: 16-128MB) * 2 A CD-R[...]

51 Glossary of T er ms A program used to operate or manage a peripheral device (printer , modem, digital camera, USB reader/writer , etc.). Without the proper driver installed, a peripheral device will not be recognized by the computer . A window that appears on the monitor when the computer requires user confirmation or instructions on what to do.[...]

OL YMPUS OPTICAL CO ., L TD. VT398703[...]