Multiquip WM70SH5C manuale d’uso

OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .multiquip.com SERIES MODELS WM70SH5C WM70SH8C PLASTER AND MOR T AR MIXER (HONDA GX160/GX240 GASOLINE ENGINE) Re vision #0 (06/07/11)[...]

P A GE 2 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P AR TS MANU AL — REV . #0 (06/07/11) PROPOSITION 65 W ARNING Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay , granite and numerous other mine[...]

P A GE 4 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) T ABLE OF CONTENTS WM70SH5C/WM70SH8C Mixer Proposition 65 Warning ........................................... 2 Silicosis/Respiratory W ar nings ................................ 3 T able Of Contents .................................................... 4 P[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 5 P AR TS ORDERING PROCEDURES www .multiquip .com Or dering par ts has never been easier! Choose fr om three easy options: WE A CCEPT ALL MAJOR CREDIT CARDS! When or dering par ts, please supply: ❒ Dealer Account Number ❒ Dealer Name and Address ❒ Shi[...]

P A GE 6 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) SAFETY INFORMA TION Do not operate or ser vice the equipment before reading the entire manual. Safety precautions should be f ollowed at all times when operating this equipment. F ailure to read and understand the safety messages and operating instr uctio[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 7 SAFETY INFORMA TION GENERAL SAFETY CA UTION  NEV ER ope ra te this equ ipm ent with out pro per pro tec tiv e clothing, shatter proof glasses, respirator y protection, hea ring pr ote cti on, ste el- toe d bo ots an d ot her pr ote cti v e de vice s r [...]

P A GE 8 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) SAFETY INFORMA TION MIXER SAFETY D ANGER  N E V E R o pe r a t e th e eq u i p m e n t i n a n e xp l o s i v e a t m o sp h er e o r ne ar c o mb us ti b le ma te ri al s . An e xp lo si on or fi re co ul d re su lt c au si ng se v er e bo di l y ha [...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 9 SAFETY INFORMA TION FUEL SAFETY (GASOLINE MODELS ONL Y) D ANGER  DO NO T star t the engine near spilled fuel or combu stib le fl uids . Fuel is extremely fl ammab le and its vapors can cause an e xplosion if ignited.  AL W A YS ref uel in a well -[...]

P A GE 10 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) SAFETY INFORMA TION T O WING SAFETY CA UTION  Chec k with your local county or state safety towing regulations, in addition to meeting Depar tment of T ranspor tation (DO T) Safety T owing Regulations, bef ore towing your mix er .  In order to redu[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 11 T O W BAR TO MIXER CONNECTION Ref erence Figure 1 for the installation of the saf ety chain. 1. Inser t the tow bar through the round opening at the bottom of the mix er stand. Al ign the hole on the tow bar with the hole on the mix er frame, and inser t[...]

P A GE 12 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) SPECIFICA TIONS T able 1. Mixer Specifications Capacity 7.0 cu. ft (198 liters) Bag Capacity 1-1/2 to 2-1/2 bags W eight 788 lbs. (357 kg.) Height W/Dump Handle 73 in. (185 cm.) Discharge Height 21 in. (53 cm.) Drive V -Belt/Gear Dump Action Manual T ab[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 13 DIMENSIONS Figure 3. Dimensions C A B HBC-1 2-INCH BALL COUPLER HPC-1 1-INCH PIN COUPLER OPTIONAL T OW BARS APPROXIMA TE LENGTH 36 IN. (91.44 CM) HLC-1 LOOP COUPLER T able 3. Dimensions Description Dimensions in. (cm) Length (w/T ow Bar) 67 in. (170 cm) [...]

P A GE 14 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) GENERAL INFORMA TION APPLICA TION The MQ Whiteman WM70SH5C/WM70SH8C mixer (dr um capacity of 7.0 cu. ft./198 liters) is shipped completel y as sem bl ed and has been f act ory test ed and is rea dy f or use . This mix er is only intended for the producti[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 15 COMPONENTS Figure 4 illustrates the basic components and controls of the WM70SH5C/WM70SH8C mix er . 1. Tires Pl y — The tire ply (lay ers) n umber is r ated in letters. This mixer uses 13-inch 4-ply tires . 2. Engine Cover — Lift this cov er to gain [...]

P A GE 16 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) INSPECTION BEFORE ST ARTING 1. Read all saf ety instructi ons at the beginn ing of manual. 2. Clean the unit, removing dir t and dust, particular ly the engine cooling air inlet, carburetor and air cleaner . 3. Check the air filter f or dir t and dust. [...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 17 INSPECTION FUEL CHECK 1. Remov e the gasoline cap located on top of fuel tank. 2. Visually inspect to see if fuel le vel is lo w . If fuel is low , replenish with unleaded fuel. 3. When refueling, be sure to use a strainer f or filtration. DO NO T top-o[...]

P A GE 18 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) Figure 7. Engine Components INITIAL SER VICING The engine (Figure 7) must be checked for proper lubrica tion and filled with fuel prior to operat ion. Ref er to the engine manuf acturer’ s manual for instructions and details of operation and servicing[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 19 P ADDLE BLADE ADJUSTMENT Adjust paddles as shown in Figure 8. Figure 8. Paddle Blade Adjustment TOW END CAST P ADDLE ENGINE END CAST P ADDLE CENTER ENGINE END CAST P ADDLE SIDE P ADDLE BLADE END P ADDLE BLADE ROT A TION ROT A TION P ADDLE BLADE IS T OO T[...]

P A GE 20 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) ST AR T -UP Th is s ec t io n is in t en d ed to as si st th e op er a to r wi th t he in it i al st art- u p of th e un it . It is e xt re me l y im po r ta nt th at th is s ec tio n b e r ea d c ar ef u ll y be f or e a tte mp ti ng to u se th e mi x e[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 21 ST AR T -UP 6. Pla ce the belt slip lev er (Fig ure 14) in the ST AR T/ST OP (disengaged) position. Figure 14. Belt Slip Lever (Start/Stop Position) Figure 15. Drum Lock Pin (Side-View) ST ART/ST OP POSITION BEL T SLIP LEVER CA UTION Ma ke ce rta in th e[...]

P A GE 22 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) OPERA TION MIXING/DUMPING 1. The paddle shaft inside the drum should be rotating at this time. 2. Add a small amount water to the mixing drum. 3. Lift the mixing bag compound onto the steel saf ety grate ov er the bag cutter and let the contents fall int[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 23 NOTES[...]

P A GE 24 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) MAINTENANCE (ENGINE) Use T ab le 6 as a gen er al maint ena nce guid eli ne when servici ng yo ur engi ne . Fo r more deta il engi ne main ten anc e inf ormat ion , ref er to the engine owner’ s manual supplied with your engine . T able 6. Engine Maint[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 25 MAINTENANCE (ENGINE) P erf orm the sche dule d main tena nce proced ure s as defin ed by T able 6 and belo w: D AIL Y  Thoroughly remove dir t and oil from the engine and control area. Clean or replace the air cleaner elements as necessar y . Check a[...]

P A GE 26 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) MAINTENANCE (MIXER) DRUM HEAD SEALS There is 1 set of drum head seals (Figure 24) that will require lubrication. Lubr icate the grease fitting f or each drum seal ev er y 40 hours of operation using any grade lithium base grease. Apply grease until visi[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 27 MAINTENANCE (MIXER) Figure 26. Grease Fittings (Countershaft) WHEEL BEARINGS 1. Afte r ev er y 3 mont hs of operat ion, remov e the hub dust cap and inspect the wheel bearings (Figure 27). Once a year , or when required, disassemble the wheel hubs remo v[...]

P A GE 28 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) IN SP ECT T OO TH CO NT A CT BE TWE EN MAIN GEA R AND DRIVE PINION 1. Coat 3 or 4 teeth at 3 different positions on the main gear with yello w paint. 2. Rotate the drive pulle y in both directions. 3. Inspect the tooth pattern. 4. If gear teeth are not c[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 29 MAINTENANCE (MIXER) Lug Nut T orque Requirements It is extre mel y i mpor ta nt to ap ply an d ma int ain pr ope r wheel mounting torque. Be sure to use only the f asteners matched to the cone angle of the wheel. Proper procedure f or attachment of the w[...]

P A GE 30 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) MAINTENANCE (MIXER) SUSPENSION The r igid type axle and associated hardware (Figure 32) should be periodically inspected for signs of excessiv e wear , elongation of bolt holes, and loosening of f asteners. Replace all damaged par ts immediately . Figure[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 31 MAINTENANCE (MIXER) MIXER ST ORA GE F or storage of the mix er f or ov er 30 days, the f ollowing is recommended:  Dr ain the fuel tank comp letel y , or add ST A-BIL to the fuel.  Run the engine until the fuel is completely consumed.  Completel[...]

P A GE 32 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) TROUBLESHOOTING T roubleshooting (Engine) Symptom P ossible Problem Solution Diffi cult to star t, fuel is availab le, but no spark at spark plug. Spark plug bridging? Check gap , insulation or replace spar k plug. Carbon deposit on spark plug? Clean or[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 33 TROUBLESHOOTING T roubleshooting (Engine) - contin ued Symptom P ossible Problem Solution Weak in po wer , compression is proper and does not misfi re. Air cleaner dir ty? Clean or replace air cleaner . Improper lev el in carburetor? Check fl oat adjus[...]

P A GE 34 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) Mixer T roubleshooting Blades will not rotate. W or n or def ective V -belt? Replace V -belt. Adjustment le ver mis-aligned? Chec k position of adjustment le ver . Adjust if necessar y . Material leaking from dr um ends. W or n or def ective paddle shaft[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 35 WIRING DIAGRAM[...]

P A GE 36 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) EXPLANA TION OF CODE IN REMARKS COLUMN The following section explains the diff erent symbols and remarks used in the P ar ts section of this man ual. Use the help number s fo und on the back page of the man ual if ther e are any questions . SAMPLE P ARTS[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 37 SUGGESTED SP ARE P AR TS WM70SH5C/WM70SH8C PLASTER AND MORT AR MIXER WITH HOND A GX160/GX240 ENGINE 1 to 3 units Qty . P/N Description 6............505834 .................. V -BEL T 2............EM914288 ............ OIL SEAL, AXLE 4............EM903113[...]

P A GE 38 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) NAMEPLA TE AND DECALS INSTRUCTIONS DE SÉCURITÉ 1. Lire le manuel du propriétaire avant d'opérer. 2. Garder les personnes non autorisées et non formées loin de la machine lorsqu'elle est en marche. 3. S'assurer que tous les dispositif[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 39 NAMEPLA TE AND DECALS NO . P ART NO . P ART NAME QTY . REMARKS 1 EM948630 DECAL, PUSH TO ST OP (ENGLISH) 1 2 CIP520932 DECAL, PUSH TO ST OP (FRENCH) 1 3 CIP520933 DECAL, DO NO T SMOKE 1 4 CIP520938 DECAL, READ MANU AL, CR USH HAZARD 1 5 CIP520935 DECAL, [...]

P A GE 40 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) FRAME ASSY . MOUNT PILLOW BLOCKS FOR PINION SHAFT HERE MOUNT DRUM BEARING HERE MOUNT DRUM BEARING HERE OPTIONAL T OW BARS A A 1 2 10 3 4 8 9 5 1 1 12 13 15 16 17 18 14 7 CHAIN & LINK KIT 14A[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 41 NO . P ART NO . P ART NAME QTY . REMARKS 1 514842 LOCK PIN UNIT 1 2 491692 COTTER PIN 1 3 530023 SPRING LOCKING PIN 1 4 507444 WASHER, FLA T 3/4" 1 5 520619 MAIN FRAME 1 7 514836 HANDLE, CLUTCH ENGAGE 1 8 EM963692 BOL T 1/2" UNC 1-1/2" 6 9[...]

P A GE 42 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) P ADDLE SHAFT ASSY . T OW END CENTER ENGINE END ENGINE END CENTER T OW END 8 2 4 9 10 18 17 1 1 10 1 1 13 12 1 1 14 2 15 16 7 2 3 4 5 6 2 7 1 WIPER AND SCRAPPER HARDW ARE KIT 19 S IDE E N D S ID E S ID E SIDE E N D S I D E S C R A P E R E N D S C R A P E[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 43 P ADDLE SHAFT ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 514752 P ADDLE SHAFT 1 2 492584 NUT , LOCK 1/2" 6 3 EM202896 P ADDLE ARM, CENTER ENGINE END 1 4 492399 B0L T , 1/2 X 3 2 5 EM200292 INSER T , P ADDLE ARM 4 6 EM202898 P ADDLE ARM, ENGIN[...]

P A GE 44 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) STEEL TUB ASSY . P ART OF FRONT FRAME P ART OF REAR FRAME 1 4 4 5 5 6 2 3 3 1 6 19 6 8 8 9 9 10 12 14 15 15 16 17 13 12 1 1 21 29 20 27 26 25 30 31 22 23 27 1 1 10 7 7 18 18 7 7 32 32 33 34 34 34 6 6 6[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 45 STEEL TUB ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 530028C DR UM BEARING BRA CKET 2 2 3249 CAP , DUST 1 3 20561-001 BEARING SEALED ............................................2................ SET SCREWS AND BEARING .............................[...]

P A GE 46 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) AXLE ASSY . 10 8 9 6 7 5 4 3 2 1 1 1 9 8 NOTES: 1 COMPLETE HUB ASSEMBL Y INCLUDES ITEMS WITHIN DASHED LINES, AND ALSO INCLUDES ITEMS 1 AND 2. 1 12[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 47 AXLE ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1# 3469 DUST CAP 2 2# 8115 LUG NUTS 8 3 3005 TIRE AND RIM, CARLISE 2 4 8164 CASTLE NUT 1" 2 5 491688 COTTER PIN 1/8" X 1-1/2' 2 6 EM511159 W ASHER, FLA T , .087" THICKNESS 2 7 EM501[...]

P A GE 48 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) ENGINE ASSY . 8 5 7 2 4 3 P ART OF FRAME P ART OF FRAME 6 15 22 23 24 1 1 17 27 29 28 25 31 33 35 22 34 9 3 36 13 18 16 1 1 1 1 2 26 12 30 30 14 P ART OF FRAME 37 32[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 49 ENGINE ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EM969013 NUT 3/8" NC G5 8 2 506488 FLA T W ASHER 3/8 8 3 EM905016 PILLO W BLOCK BEARING 2 4 492378 BOL T 3/8" NC X 1-3/4" G5 4 5 490957 RING, RETENTION 1 6 513868 PINION GEAR 1 7 500[...]

P A GE 50 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) CABINET ASSY . 1 2 2 10 1 1 12 13 14 15 15 8 8 16V 2 7 8 8 9 5 6 5 2 12oz[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 51 CABINET ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 520620 CABINET , ENGINE W/DECALS ........................1................ INCLUDES ITEMS W/@ 2 EM505186 B UMPER, STICK ON 4 5 503723 POP RIVET ....................................................[...]

P A GE 52 — WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) TERMS AND CONDITIONS OF SALE — P AR TS P A YME NT TERM S T er ms of payment for par ts are net 30 d ays . FREIG HT POLICY Al l p ar t s o rd er s w il l b e sh i pp e d c ol le c t or prepaid with the charges added to the invoice. A l l s h i p m e n t[...]

WM70SH5C/WM70SH8C MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (06/07/11) — P A GE 53 NOTES[...]

OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ P ar ts Department 18910 Wilmington A ve. Carson, CA 90746 Contact: mq@multiquip .com T el. (800) 421-1244 F ax (800) 537-3927 800-427-1244 310-537-3700 F ax: 800-[...]