Mitsubishi Electronics NSB1107STTUW manuale d’uso

MODEL NSB1 107STTUW USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor . AUTO-SCANNING WITH DIGIT AL CONTROL COLOR DISPLA Y MONITOR Internet Home Page: http://www .mitsubishi-display .com/ Supplying Windows ® 95/98 INF Fi[...]

- 2 -[...]

- 3 - ENGLISH CAUTION The power cord provided with this monitor is de- signed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards. Trademark IBM, PC, PS/2, PS/V, Personal System/2 are registered trade- marks o[...]

- 4 - 高調波ガイドライン適合品 RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installatio[...]

- 5 - ENGLISH Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have [...]

- 6 - 1 1 INTRODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor. This guide also provides technical specifications and instructions for troubleshooting any basic p[...]

- 7 - ENGLISH PRESET Polarity TIMING Fh(kHz) Fv (Hz) H V 640 x 480 N.I. 31.5 60.0 – – 800 x 600 N.I. 53.7 85.1 + + 1024 x 768 N.I. 60.0 75.0 + + 1024 x 768 N.I. 68.7 85.0 + + 1152 x 870 N.I. 68.7 75.1 – – 1280 x 1024 N.I. 80.0 75.0 + + 1280 x 1024 N.I. 91.1 85.0 + + 1600 x 1200 N.I. 93.8 75.0 + + 1600 x 1200 N.I. 106.3 85.0 + + 1920 x 1440 [...]

- 8 - Connect the color monitor and computer with the necessary cords and cables. 1.9 Quick Operation Chart To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below. See Section 3. INSTALLATION AND CONNECTION Turn on the computer. Turn on the color monitor. S[...]

- 9 - ENGLISH 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR 2 2 P ART NAME FRONT R G B HD VD D-SUB COMP. BNC A B 1 2 R G B HD VD D-SUB COMP . BNC A B 1 2 Figure 3 8. AC POWER CONNECTOR 9. SIGNAL INPUT CONNECTOR (DB9-15P) 10[...]

- 10 - 3.2.2 Connecting to An Apple Macintosh Computer Figure 6 shows the SC-B104 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. For Macintosh Adapter AD-A205, contact your dealer. 1. Power off, both the monitor and the computer. 2. Set the DIP switches of Macintosh Adapter according to the setting chart. (See Section 7.[...]

- 11 - ENGLISH R G B HD VD D-SUB COMP. BNC A B 1 2 R G B HD VD D-SUB COMP . BNC A B 1 2 3.2.4 BNC Connection (1) COMPOSITE SYNC ON GREEN VIDEO SIGNAL (3 wires): Connect the R, G and B video signals to the BNC connectors on the back of the monitor. (2) EXTERNAL COMPOSITE SYNC SIGNAL(4 wires): Connect the R, G and B video signals and the Com- posite [...]

- 12 - NOTE NOTE Figure 10 (a ) Disconnect and connect the USB cable to the up- stream port of the display monitor. (b) Cycle power of the display monitor off then on. If the mark appears with “Generic USB HUB”, then enumeration was unsuccessful. Select “Generic USB HUB” marked with mark and click “Remove” and “Refresh”. After that,[...]

- 13 - ENGLISH (4) Click “CD-ROM Drive(C)” , and click “Next”. Figure 14 will appear. Figure 14 (2) Click “Next” on Figure 11 and Figure 12 will appear. (3) Click “Next” on Figure 12 and Figure 13 will appear. Figure 12 Figure 13 (5) Click “Finish” on Figure 14 and Figure 15 will appear. Click “OK” on Figure 15 to complete E[...]

- 14 - 4 4 OSD (On Screen Display) FUNCTIONS The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. (1) Turn on the monitor. (2) Press button to display the OSD screen. (3) Select the group icon on Main Menu by pressing . (5)Adjust by pressing or button. (6)If you don'[...]

- 15 - ENGLISH CONTRAST Adjusts the contrast level. X X X BRIGHT Adjusts the black level of the screen X X X COLOR NO Select the desired color from Color 1, Color 2, and Color 3 presets. X R-GAIN Adjusts the red-color balances for the selected color . X X X G-GAIN Adjusts the green-color balances for the selected color . X X X B-GAIN Adjusts the bl[...]

- 16 - To restore to factory preset level. To decrease the contrast. To increase the contrast. To decrease the brightness. To increase the brightness. To decrease the color temperature of the color mode selected by "COLOR NO". To narrow the width of the image on the screen. To expand the width of the image on the screen. To move the image[...]

- 17 - ENGLISH To decrease the level of the moire-clear wave. To select "HIGH" mode. To adjust the purity condition on the top-left corner. To eliminate an excessive green or white-back ground that may occur when both Sync-On-Green and external sync signals are applied to the monitor. To clamp the video signal at the front of the H-Sync p[...]

- 18 - The USB functions of the com- puter connected to Upstream port ROOT-A become active. The USB functions of the com- puter connected to Upstream port ROOT-B become active.  The active Upstream port in active is colored blue on the OSD screen.  In case that either the Upstream port ROOT-A or ROOT-B is chosen by this function, the auto-cha[...]

- 19 - ENGLISH No operation of the USB devices PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA[...]

- 20 - PROBLEM ITEMS TO CHECK LOCATION • • • Black vertical lines are visible on the screen. Thin vertical black lines on one or both sides of the screen. This minor condition is caused by grille element overlap which can occur during shipping. Position an open white window over the affected area of the screen and maximize the brightness and [...]

- 21 - ENGLISH Size 55cm/22"(51cm/20" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 90 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.24mm Phosphor pitch 0.25mm Face Plate Anti-glare, Anti-reflection and Anti-static coating Focusing method Dynamic Beam Forming (DB[...]

- 22 - 7.3 Optional Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter(option) allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. (1) Set the dip switches of the adapter, before connect to the computer. Apple Macintosh Switch ON Switch Setting 2,4 Macintosh IIsi, IIci, IIvi,[...]

- 23 - ENGLISH 640 x480@60Hz 640 x480@67Hz 640 x480@72Hz 640 x480@75Hz 640 x480@85Hz 800 x600@60Hz 800 x600@72Hz 800 x600@75Hz 800 x600@85Hz 832 x624@75Hz 1024 x768@60Hz 1024 x768@70Hz 1024 x768@72Hz 1024 x768@75Hz 1024 x768@85Hz 1152 x870@75Hz 1280 x960@60Hz 1280 x960@75Hz 1280 x960@85Hz 1280 x1024@60Hz 1280 x1024@75Hz 1280 x1024@85Hz 1600 x1200@6[...]

MITSUBISHI ELECTRIC CORPORA TION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, T OKYO 100-8310 TELEX J24532 CABLE MELCO T OKYO http://www .mitsubishi-display .com CP871C164A90[...]