LG E2350VR-SN manuale d’uso

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. S ee the label attached on the product and give the information to your dealer when you ask for service. E2250VR E2350VR User ’ s Guide[...]

1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the powe[...]

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventila[...]

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. [...]

4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . DVI-D Signal Cable (This feature is not available in all countries.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cabl[...]

Connecting the Display 5 Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 1 way stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Use a coin on the back of the stand base and turn the screw clockwise to tighten. 3. Once assembled take the [...]

Press 6 Connecting the Display 2. Press the button as shown, and pull the stand body up. 3. After pull the stand body up,take the monitor up carefully and face the front side. (Once you pull the stand body up, please keep pressing the button.If you don’t press the button, it will damage the product.) When limited tilt degree, the button is not wo[...]

7 Connecting the Display 4. If you want to use the stand base,pull the stand body down. (Once you pull the stand body down, please keep pressing the button.If you don’t press the button, it will damage the product.) 5. Use a coin on the back of the stand base and turn the screw clockwise to tighten. 6. Once assembled take the monitor up carefully[...]

8 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below . * With stand base Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚ to 15?[...]

Connecting the Display 9 Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Positioning your display * Without stand base Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the backward tilt angle of the monitor shoul[...]

10 Connecting the Display A B Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable Connect HDMI Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw of the signal cab[...]

Connecting the Display 11 NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO’ Function? When you encounter problems such as blurry scre[...]

12 Control Panel Functions Front Panel Controls SMART+ Button Use this button to enter AUTO BRIGHT,ORIGINAL RATIO, FENGINE, DUAL WEB,CINEMA MODE menus. For more information, refer to page 22 to 26. MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and h[...]

13 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E2250V [...]

14 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjus[...]

AUTO BRIGHT ORIGINAL RATIO FENGINE DUAL WEB CINEMA MODE SMART+ NORMAL MOVIE INTERNET DEMO STANDARD MOVIE GAME SPORTS LANGUAGE POWER INDICATOR BUTTON INDICATOR WHITE BALANCE FACTORY RESET To customize the screen status for a user's operating environment OTHERS HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN DISPLAY To adjust the position of the screen[...]

16 NOTE The order of icons may differ depending on the model (15~25). SUPER+ RESOLUTION DSUB DVI-D HDMI[...]

17 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. You can set the offs[...]

19 Main menu Sub menu Description PRESET Select the screen color. • sRGB: Set the screen color to fit the sRGB standard color specification. • 6500K-7500K: Red screen color. • 8500K-9300K: Blue screen color. RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. GAMMA Set your own gamma [...]

20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE OVERSCAN To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of chara[...]

21 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. Main menu Sub menu Description To choose the language in which the control names are displayed. LANGUAGE WHITE BALANCE If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. [...]

22 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

23 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description If select on,it automatically controls the brightness of display to best suit the surrounding working environment, providing the optimal viewing condition and maximizeduser convenience. If select off, AUTO BRIGHTNESS is off. D-SUB/DVI-D/HDMI input D-SUB/DVI-D/HDMI inp[...]

24 Main menu Sub menu Description D-SUB/DVI-D input HDMI input Select this when you want to use the product in the most general using environment. Select this when you are watching a video or movie. Select this when you want to use the original standard video. * In the General (Standard) mode, the FENGINE is turned off. Exit : Exit , : Move : Selec[...]

25 Main menu Sub menu Description D-SUB/DVI-D input HDMI input Exit : Exit , : Move : Select another sub-menu Select this when you are working on the document (Word etc.) Select this when you are playing a game. This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so[...]

26 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Make the eye comfortable by reducing the background brightness in the web page. If select off, CINEMA MODE is off. * Before using below functions, please install Easy Set Packge programme. Help user to browse web efficiently by dividing in half. Help to arrange and mo[...]

27 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

28 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit : Exit , : Move : Select another sub-menu TBD TBD TBD TBD TBD[...]

29 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator flickering? ● Do you see an "OUT OF RANGE" message on the screen?[...]

30 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are u[...]

31 The Audio function is not working T roubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bi[...]

32 Specifications E2250VR 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 mm x 0.248 mm (Pixel pitch) Display Sync Input Video Input Max VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz Resolution Plug&Play On Mode : 24 W (Typ.) Sleep Mode ≤ 1 W Off Mode ≤ 0.5 W Power Co[...]

33 Specifications E2350VR 58.4 cm (23.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 58.4 cm 0.266 mm x 0.266 mm (Pixel pitch) Display Horizontal Freq. Analog, Digital: 3 0 kHz to 83 kHz (Automatic) HDMI : 30 kHz to 83 kHz (Automatic) Vertical Freq. Analog, Digital : 5 6 Hz t o 7 5 H z ( A utomatic) HDMI : 56 Hz[...]

34 Specifications Indicator On Mode Sleep Mode Off Mode Purple (front view) Purple Blinking (front view) Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) * Recommend Mode Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 480P 576P 720P 720P 1080i 1080i 1080P 1080P 31.50 31.[...]

Digitally yours[...]